All MIBs › TELDAT-MON-FEATURES-WRR-MIB
Category: Teldat Router Management
Description: Monitors Teldat router weighted round-robin (WRR) scheduler feature status and per-queue traffic statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-FEATURES-WRR-MIB?
TELDAT-MON-FEATURES-WRR-MIB is a vendor-specific MIB from Teldat covering the Weighted Round-Robin (WRR) queue scheduling feature used for QoS traffic management on Teldat routers. It is expected to expose per-queue configuration and traffic statistics such as queue weights and transmitted/dropped packet or byte counts, mirroring the structure of Teldat's other MON-FEATURES modules. Its monitoring purpose is software/QoS feature performance status: administrators would use it to confirm that weighted scheduling is fairly distributing bandwidth across queues and to detect queues that are dropping excessive traffic under congestion. It is a feature-specific companion to Teldat's interface and other QoS MIBs, since WRR scheduling operates on top of physical/logical interfaces defined elsewhere. It is typically deployed on Teldat router WAN interfaces where multiple traffic classes share a link under a weighted fair-queuing policy. Network engineers evaluating or troubleshooting this functionality can download the TELDAT-MON-FEATURES-WRR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-FEATURES-WRR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat enterprise/carrier routers
Monitoring Examples
No sample objects were provided for this module, so specific table or object names cannot be grounded here. Conceptually, an administrator would poll per-queue transmitted and discarded packet/byte counters to verify weighted bandwidth distribution is behaving as configured, but a concrete example is not fabricated without source object names.
What Can Be Monitored
- per-queue transmitted packets/bytes
- per-queue discarded packets/bytes
- WRR queue weight configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
| telProdNpMonFeatures | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProdNpFeatWRRGlobalGroup | 1.3.6.1.4.1.2007.4.1.2.4.3.1 | |||
| INT telProdNpFeatWRRGloDefFirstStTime | 1.3.6.1.4.1.2007.4.1.2.4.3.1.2 | INTEGER | read-only | Default First Stabilization Time, in seconds. The first stabilization time is the length of time the primary interface must be down before activating the secondary (to carry out backup). |
| INT telProdNpFeatWRRGloDefStabTime | 1.3.6.1.4.1.2007.4.1.2.4.3.1.3 | INTEGER | read-only | Default Stabilization Time, in seconds. The stabilization time is the minimum length of time the primary interface must be active for before the secondary deactivates (returns from backup to initial situation). |
| INT telProdNpFeatWRRGloStatus | 1.3.6.1.4.1.2007.4.1.2.4.3.1.1 | INTEGER | read-only | Indicates if the WRR Backup function is enabled or not. Possible values are: (1) enabled or (2) disabled. |
| telProdNpMonFeatWRR | 1.3.6.1.4.1.2007.4.1.2.4.3 | |||
| telProdNpMonFeatWRRCountersGroup | 1.3.6.1.4.1.2007.4.1.2.4.3.4 | |||
| STR telProdNpMonFeatWRRCountSecIfcsAccuDur | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.9 | DisplayString | read-only | Accumulated rerouting process time. String with the format hours:minutes:seconds. |
| STR telProdNpMonFeatWRRCountSecIfcsCurrDur | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.8 | DisplayString | read-only | Current rerouting process time. String with the format hours:minutes:seconds. |
| STR telProdNpMonFeatWRRCountSecIfcsDescrip | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.3 | DisplayString | read-only | Description of the type of the secondary link interface. |
| telProdNpMonFeatWRRCountSecIfcsEntry | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1 | not-accessible | Each entry shows the statistics related to a secondary link. It consists of an index, that is the order number of the table entry, number of the interface configured as secondary link, description of the type of the secondary link interface, counters of the number of times that the backup has passed to the states 'Direct', 'Alternative', 'Direct->Alternative' and 'Alternative->Direct', current rerouting process time, accumulated rerouting process time and maximum rerouting process time. | |
| INT telProdNpMonFeatWRRCountSecIfcsIndex | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.1 | INTEGER | read-only | Table index: order number of the entry. |
| STR telProdNpMonFeatWRRCountSecIfcsLongest | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.10 | DisplayString | read-only | Maximum rerouting process time. String with the format hours:minutes:seconds. |
| CTR telProdNpMonFeatWRRCountSecIfcsNumAD | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.7 | Counter | read-only | Number of times that the backup has passed to a 'Alternative->Direct' state. |
| CTR telProdNpMonFeatWRRCountSecIfcsNumAlt | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.6 | Counter | read-only | Number of times that the backup has passed to an 'Alternative' state. |
| CTR telProdNpMonFeatWRRCountSecIfcsNumDA | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.5 | Counter | read-only | Number of times that the backup has passed to a 'Direct->Alternative' state. |
| CTR telProdNpMonFeatWRRCountSecIfcsNumDir | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.4 | Counter | read-only | Number of times that the backup has passed to a 'Direct' state. |
| INT telProdNpMonFeatWRRCountSecIfcsSecond | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2.1.2 | INTEGER | read-only | Number of the interface configured as secondary link. |
| telProdNpMonFeatWRRCountSecIfcsTable | 1.3.6.1.4.1.2007.4.1.2.4.3.4.2 | not-accessible | Table that displays statistics related to a secondary link. One entry per secondary link. | |
| STR telProdNpMonFeatWRRCountSumAccTime | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.6 | DisplayString | read-only | Total or accumulated time in backup WRR. It is a string with the format hours:minutes:seconds. |
| CTR telProdNpMonFeatWRRCountSumAltDir | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.2 | Counter | read-only | Total number of times 'alternative->direct' state is reached. |
| CTR telProdNpMonFeatWRRCountSumAltSt | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.1 | Counter | read-only | Total number of times 'alternative' state is reached. |
| CTR telProdNpMonFeatWRRCountSumDirAlt | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.4 | Counter | read-only | Total number of times 'direct->alternative' state is reached. |
| CTR telProdNpMonFeatWRRCountSumDirSt | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.3 | Counter | read-only | Total number of times 'direct' state is reached. |
| STR telProdNpMonFeatWRRCountSumLongest | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1.5 | DisplayString | read-only | Backup WRR longest duration. It is a string with the format hours:minutes:seconds. |
| telProdNpMonFeatWRRCountSummary | 1.3.6.1.4.1.2007.4.1.2.4.3.4.1 | |||
| INT telProdNpMonFeatWRRPairsEnabled | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.7 | INTEGER | read-only | Indicates if association is enabled (1) or disabled (2) for backup. |
| telProdNpMonFeatWRRPairsEntry | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1 | not-accessible | Each entry corresponds to an association or pair of primary link-secondary link, and it consists of interface number, subinterface, and description of the secondary link interface type, variable that indicates if the association is enabled or not for backup, first stabilization time, stabilization time, last event provoked by the primary interface, number of times that a primary link has activated, and number of times that a primary link has gone down or deactivated. | |
| INT telProdNpMonFeatWRRPairsFirstStTime | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.8 | INTEGER | read-only | First stabilization time. The first stabilization time is the length of time the primary interface must be down before activating the secondary (to carry out backup). |
| telProdNpMonFeatWRRPairsGroup | 1.3.6.1.4.1.2007.4.1.2.4.3.5 | |||
| INT telProdNpMonFeatWRRPairsIfcEnabled | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.7 | INTEGER | read-only | Indicates if association is enabled (1) or disabled (2) for backup. |
| telProdNpMonFeatWRRPairsIfcEntry | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1 | not-accessible | Each entry corresponds to an association or pair of primary link-secondary link, and it consists of interface number, subinterface, and description of the secondary link interface type, variable that indicates if the association is enabled or not for backup, first stabilization time, stabilization time, last event provoked by the primary interface, number of times that a primary link has activated, and number of times that a primary link has gone down or deactivated. | |
| INT telProdNpMonFeatWRRPairsIfcFirstStTime | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.8 | INTEGER | read-only | First stabilization time. The first stabilization time is the length of time the primary interface must be down before activating the secondary (to carry out backup). |
| INT telProdNpMonFeatWRRPairsIfcIndex | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.1 | INTEGER | read-only | Table index: order number of the entry or association between a primary link and a secondary or alternative one. |
| INT telProdNpMonFeatWRRPairsIfcLastEvent | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.10 | INTEGER | read-only | Last event provoked by the primary interface. Various events can occur provoking changes in the state of the system: (0) Unknown: no event has been produced yet, or the event is unknown. (1) Primary Up: one of the primary interfaces associated to a secondary interface has announced the recovery of the link. (2) Primary Down: one of the primary interfaces associated to this secondary interface has announced link failure. (3) First Stabilization Time expired: the timer for the first establishment period of time has lapsed. The First Stabilization Time is length of time the primary interface must be down before activating the secondary (to carry out backup). (4) Stabilization Time expired: the timer for the establishment period of time has lapsed. The Stabilization Time is the minimum length of time the primary interface must be active for before the secondary deactivates (returns from backup to initial situation). |
| CTR telProdNpMonFeatWRRPairsIfcNumAct | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.11 | Counter | read-only | Number of times that the primary link has activated. |
| CTR telProdNpMonFeatWRRPairsIfcNumInact | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.12 | Counter | read-only | Number of times that a primary link has gone down, has deactivated. |
| STR telProdNpMonFeatWRRPairsIfcPriIfcDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.4 | DisplayString | read-only | Description of the type of the primary link interface. |
| INT telProdNpMonFeatWRRPairsIfcPrimaryIfc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.2 | INTEGER | read-only | Interface number of the primary link. |
| STR telProdNpMonFeatWRRPairsIfcPriSubnet | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.3 | DisplayString | read-only | String that indicates the primary link subinterface. |
| STR telProdNpMonFeatWRRPairsIfcSecondDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.6 | DisplayString | read-only | Description of the type of the secondary link interface. |
| INT telProdNpMonFeatWRRPairsIfcSecondIfc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.5 | INTEGER | read-only | Number of the interface configured as secondary link. |
| INT telProdNpMonFeatWRRPairsIfcStabTime | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1.1.9 | INTEGER | read-only | Stabilization time. The stabilization time is the minimum length of time the primary interface must be active for before the secondary deactivates (returns from backup to initial situation). |
| telProdNpMonFeatWRRPairsIfcTable | 1.3.6.1.4.1.2007.4.1.2.4.3.5.1 | not-accessible | Table that provides information concerning the associations. Each entry displays information related to each pair of primary link-secondary link. | |
| INT telProdNpMonFeatWRRPairsIndex | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.1 | INTEGER | read-only | Table index: order number of the entry or association between a primary link and a secondary or alternative one. |
| INT telProdNpMonFeatWRRPairsLastEvent | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.10 | INTEGER | read-only | Last event provoked by the primary interface. Various events can occur provoking changes in the state of the system: (0) Unknown: no event has been produced yet, or the event is unknown. (1) Primary Up: one of the primary interfaces associated to a secondary interface has announced the recovery of the link. (2) Primary Down: one of the primary interfaces associated to this secondary interface has announced link failure. secundario ha anunciado una cada del enlace. (3) First Stabilization Time expired: the timer for the first establishment period of time has lapsed. The First Stabilization Time is length of time the primary interface must be down before activating the secondary (to carry out backup). (4) Stabilization Time expired: the timer for the establishment period of time has lapsed. The Stabilization Time is the minimum length of time the primary interface must be active for before the secondary deactivates (returns from backup to initial situation). |
| CTR telProdNpMonFeatWRRPairsNumAct | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.11 | Counter | read-only | Number of times that the primary link has activated. |
| CTR telProdNpMonFeatWRRPairsNumInact | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.12 | Counter | read-only | Number of times that a primary link has gone down, has deactivated. |
| STR telProdNpMonFeatWRRPairsPriIfcDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.4 | DisplayString | read-only | Description of the type of the primary link interface. |
| INT telProdNpMonFeatWRRPairsPrimaryIfc | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.2 | INTEGER | read-only | Interface number of the primary link. |
| STR telProdNpMonFeatWRRPairsPriSubnet | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.3 | DisplayString | read-only | String that indicates the primary link subinterface. |
| INT telProdNpMonFeatWRRPairsRteEnabled | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.6 | INTEGER | read-only | Indicates if association is enabled (1) or disabled (2) for backup. |
| telProdNpMonFeatWRRPairsRteEntry | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1 | not-accessible | Each entry corresponds to an association or pair of primary ip route-secondary link, and it consists of ip route, ip route mask, and description of the secondary link interface type, variable that indicates if the association is enabled or not for backup, first stabilization time, stabilization time, last event provoked by the primary interface, number of times that a primary link has activated, and number of times that a primary link has gone down or deactivated. | |
| INT telProdNpMonFeatWRRPairsRteFirstStTime | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.7 | INTEGER | read-only | First stabilization time. The first stabilization time is the length of time the primary interface must be down before activating the secondary (to carry out backup). |
| INT telProdNpMonFeatWRRPairsRteIndex | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.1 | INTEGER | read-only | Table index: order number of the entry or association between a primary route and a secondary or alternative one. |
| INT telProdNpMonFeatWRRPairsRteLastEvent | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.9 | INTEGER | read-only | Last event provoked by the primary ip route. Various events can occur provoking changes in the state of the system: (0) Unknown: no event has been produced yet, or the event is unknown. (1) Primary Up: one of the primary routes associated to a secondary interface has announced the recovery of the route. (2) Primary Down: one of the primary routes associated to this secondary interface has announced route failure. (3) First Stabilization Time expired: the timer for the first establishment period of time has lapsed. The First Stabilization Time is length of time the primary route must be down before activating the secondary (to carry out backup). (4) Stabilization Time expired: the timer for the establishment period of time has lapsed. The Stabilization Time is the minimum length of time the primary route must be active for before the secondary deactivates (returns from backup to initial situation). |
| CTR telProdNpMonFeatWRRPairsRteNumAct | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.10 | Counter | read-only | Number of times that the primary route has activated. |
| CTR telProdNpMonFeatWRRPairsRteNumInact | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.11 | Counter | read-only | Number of times that a primary link has gone down, has deactivated. |
| STR telProdNpMonFeatWRRPairsRteOutIfcDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.13 | DisplayString | read-only | Description of the outgoing interface specified for this IP route. |
| INT telProdNpMonFeatWRRPairsRteOutIfcNum | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.12 | INTEGER | read-only | Number of the outgoing interface specified for this IP route. |
| IP telProdNpMonFeatWRRPairsRtePrimaryMsk | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.3 | IpAddress | read-only | Primary ip route mask. |
| IP telProdNpMonFeatWRRPairsRtePrimaryRte | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.2 | IpAddress | read-only | Primary ip destination route. |
| STR telProdNpMonFeatWRRPairsRteSecondDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.5 | DisplayString | read-only | Description of the type of the secondary link interface. |
| INT telProdNpMonFeatWRRPairsRteSecondIfc | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.4 | INTEGER | read-only | Number of the interface configured as secondary link. |
| INT telProdNpMonFeatWRRPairsRteStabTime | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2.1.8 | INTEGER | read-only | Stabilization time. The stabilization time is the minimum length of time the primary ip route must be active for before the secondary deactivates (returns from backup to initial situation). |
| telProdNpMonFeatWRRPairsRteTable | 1.3.6.1.4.1.2007.4.1.2.4.3.5.2 | not-accessible | Table that provides information concerning the associations. Each entry displays information related to each pair of primary ip route-secondary link. | |
| STR telProdNpMonFeatWRRPairsSecondDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.6 | DisplayString | read-only | Description of the type of the secondary link interface. |
| INT telProdNpMonFeatWRRPairsSecondIfc | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.5 | INTEGER | read-only | Number of the interface configured as secondary link. |
| INT telProdNpMonFeatWRRPairsStabTime | 1.3.6.1.4.1.2007.4.1.2.4.3.2.1.9 | INTEGER | read-only | Stabilization time. The stabilization time is the minimum length of time the primary interface must be active for before the secondary deactivates (returns from backup to initial situation). |
| telProdNpMonFeatWRRPairsTable | 1.3.6.1.4.1.2007.4.1.2.4.3.2 | not-accessible | Table that provides information concerning the associations. Each entry displays information related to each pair of primary link-secondary link. | |
| STR telProdNpMonFeatWRRSecIfcsStatusCurrDur | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.8 | DisplayString | read-only | Current time in backup. It is a string with the format hours:minutes:seconds. |
| telProdNpMonFeatWRRSecIfcsStatusEntry | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1 | not-accessible | Each entry displays information about the state of a secondary link configured. It consists of an index, that is the order number of the entry, the interface number configured as secondary link, description of the type of the secondary link interface, state of secondary link, remaining time for switch to backup, remaining time for backup recovery, number of primary links associated in backup and current time in backup. | |
| STR telProdNpMonFeatWRRSecIfcsStatusIfcDesc | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.3 | DisplayString | read-only | Description of the type of the secondary link interface. |
| INT telProdNpMonFeatWRRSecIfcsStatusIfcIndex | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.1 | INTEGER | read-only | Table index: order number of the entry inside the table. |
| INT telProdNpMonFeatWRRSecIfcsStatusIfcSecond | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.2 | INTEGER | read-only | Number of the interface configured as secondary link. |
| INT telProdNpMonFeatWRRSecIfcsStatusNumCirc | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.7 | INTEGER | read-only | Number of primary links associated in backup. |
| INT telProdNpMonFeatWRRSecIfcsStatusRRState | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.4 | INTEGER | read-only | State of secondary link. Possible values are: (0) Disabled, when there is no enabled association or where the WRR is globally disabled. (1) Initial, state of the device when starting up. The secondary interface is available. If the Primary Up event occurs, then it passes to a Direct state, if the Primary Down event occurs it then passes to Direct->Alternative. (2) Direct, the secondary is available as all the controlled primary links are active. (3) Alternative, when the First Stabilization Time expired out event arrives. With this the secondary interface auto test begins so it will activate. (4) Direct->Alternative (or rerouting), when the secondary link is available but it has received a Primary Down event from one of the associated primaries. (5) Alternative->Direct (or reestablishing), the Primary Up event from one of the primaries associated has occurred. |
| INT telProdNpMonFeatWRRSecIfcsStatusStabTime | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.6 | INTEGER | read-only | Remaining time for backup recovery. |
| telProdNpMonFeatWRRSecIfcsStatusTable | 1.3.6.1.4.1.2007.4.1.2.4.3.3 | not-accessible | Table that displays the various secondary link states. One entry per link. | |
| INT telProdNpMonFeatWRRSecIfcsStatusTimeBkup | 1.3.6.1.4.1.2007.4.1.2.4.3.3.1.5 | INTEGER | read-only | Remaining time for switch to backup. |
RFC description
Monitors WAN Reroute (WRR) backup functionality for Teldat networking equipment including route failover status.
Start monitoring Teldat enterprise/carrier router (Weighted Round-Robin queue scheduling status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.