All MIBs › TELDAT-SW-STRUCTURE-MIB
Category: Teldat Router Management
Description:
Manages Teldat router software structure, reporting installed software components, versions, and module dependencies.
Imported Objects
From TELDAT-MIB
| telproducts | OBJECT-IDENTITY |
What Is TELDAT-SW-STRUCTURE-MIB?
TELDAT-SW-STRUCTURE-MIB is a vendor MIB from Teldat, S.A., a maker of enterprise/carrier routers, focused on reporting the internal software structure of a Teldat router — the set of installed software components, their versions, and the dependencies between them. Rather than covering interfaces or environment sensors, its data category is squarely software configuration/inventory: which firmware/software modules are loaded and how they relate to one another. This makes it directly useful for monitoring software status on the device — specifically software/module version tracking and dependency verification — which is valuable for confirming a router is running a consistent, compatible set of software components after an upgrade. TELDAT-SW-STRUCTURE-MIB SNMP monitoring is therefore centered on software inventory and version consistency rather than interfaces or environmental sensors. No explicit dependency on other standard MIBs is evident from the available description, though it would typically be used alongside Teldat's other enterprise MIBs. It is deployed on Teldat router platforms managed from an NMS in enterprise or carrier WAN/routing environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-SW-STRUCTURE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- installed software component list
- software component versions
- software module dependencies
Supported Devices
- Teldat S.A. router platforms, entire product line (software module inventory/version status)
Monitoring Examples
No sample_objects were provided, but based on the module's stated purpose, an admin would poll the software component/version table to confirm all installed modules on a Teldat router report the expected version after a firmware upgrade, and check dependency objects to catch a mismatched or missing software component that could cause instability.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| telProductsNucleox | 1.3.6.1.4.1.2007.4.1 | |||
| telProductsNpConfig | 1.3.6.1.4.1.2007.4.1.1 | |||
| telProdNpConfInterface | 1.3.6.1.4.1.2007.4.1.1.4 | |||
| telProdNpConfProtocol | 1.3.6.1.4.1.2007.4.1.1.5 | |||
| telProductsNpMonit | 1.3.6.1.4.1.2007.4.1.2 | |||
| telProdNpMonitSistema | 1.3.6.1.4.1.2007.4.1.2.1 | |||
| telProdNpMonInterface | 1.3.6.1.4.1.2007.4.1.2.2 | |||
| telProdNpMonInterfRouter | 1.3.6.1.4.1.2007.4.1.2.2.2 | |||
| telProdNpMonInterfNodo | 1.3.6.1.4.1.2007.4.1.2.2.3 | |||
| telProdNpMonProtocols | 1.3.6.1.4.1.2007.4.1.2.3 | |||
| telProdNpMonProtIP | 1.3.6.1.4.1.2007.4.1.2.3.1 | |||
| telProdNpMonFeatures | 1.3.6.1.4.1.2007.4.1.2.4 |
FAQ
What does TELDAT-SW-STRUCTURE-MIB report on a Teldat router?
It reports the router's internal software structure: the set of installed software components, their versions, and the dependencies between them, rather than interface or environmental data.
When would I poll this MIB during router maintenance?
After a firmware or module upgrade on a Teldat enterprise/carrier router, you'd poll this MIB to confirm the installed software components and their versions are consistent and that module dependencies are satisfied, verifying the router ended up running a compatible software set.
RFC description
Defines Teldat enterprise private tree structure and product organization for Teldat routing devices.
Start monitoring Teldat S.A. router platforms, entire product line (software module inventory/version status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.