All MIBs › TELDAT-MON-INTERF-PCMCIA-MOBILE-MIB
Category: Teldat Router Management, Wireless and Cellular Networking
Description: Monitors Teldat router PCMCIA mobile interface card status, modem registration, and connection quality metrics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-INTERF-PCMCIA-MOBILE-MIB?
TELDAT-MON-INTERF-PCMCIA-MOBILE-MIB is a Teldat, S.A. vendor-specific MIB for monitoring PCMCIA mobile (cellular) interface cards installed in Teldat routers, exposing static module identity via teldatPCMCIAMobileInfoInterfaceTable (module manufacturer, model, firmware, IMEI, IMSI, active SIM ID/ICC) and dynamic call/connection state via teldatPCMCIAMobileStateInterfaceTable, which tracks the current call-establishment state machine (teldatPCMCIAMobileStateInterfaceState, e.g., trying-to-connect, connect, hanging-up) along with drop counters for ping, traceroute, and traffic supervision failures. A companion teldatPCMCIAMobileStateMobileTable reports radio-level metrics such as signal quality (teldatPCMCIAMobileStateMobileSignalQuality) and, in older firmware, registration state, cell ID, and radio technology/band (now marked obsolete in favor of newer objects). This MIB is useful for diagnosing flaky cellular backup links — distinguishing whether a dropped connection was due to weak radio signal, SIM/network registration issues, or supervision-triggered disconnects — and it depends on TELDAT-SW-STRUCTURE-MIB for its registration point under telProdNpMonInterfRouter; administrators managing Teldat routers with cellular WAN backup can download the TELDAT-MON-INTERF-PCMCIA-MOBILE-MIB SNMP monitoring data to track mobile interface health.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-INTERF-PCMCIA-MOBILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat routers with PCMCIA mobile (cellular) interface cards
Monitoring Examples
An operator polls teldatPCMCIAMobileStateInterfaceTable (indexed by teldatPCMCIAMobileStateInterfaceIndex) to check teldatPCMCIAMobileStateInterfaceState and teldatPCMCIAMobileStateInterfaceDropPing; a state stuck in a trying-to-connect variant combined with a climbing drop-ping counter would indicate the cellular link is failing supervision checks and repeatedly redialing.
What Can Be Monitored
- mobile module manufacturer/model/firmware/IMEI/IMSI
- active SIM ID and ICC identifier
- call connection state machine
- ping/traceroute/traffic-supervision drop counters
- radio signal quality
Imported Objects
OIDs
RFC description
PCMCIA mobile interface monitoring MIB for Teldat routers tracking cellular module information and signal statistics.
Start monitoring Teldat router with PCMCIA mobile (cellular) interface card (module identity/call-state/signal status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.