T11-FC-SP-SA-MIB

All MIBs › T11-FC-SP-SA-MIB

Organization: This MIB module was developed through the coordinated effort of two organizations: T11 began the development and the IETF (in the IMSS Working Group) finished it.

Last Updated: 2008-08-20

Category: Fibre Channel and Storage

Description: Defines managed objects for managing Fibre Channel Security Protocol (FC-SP) Security Associations.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring T11-FC-SP-SA-MIB with a free 30-day trial of IPNetwork Monitor.

What Is T11-FC-SP-SA-MIB?

T11-FC-SP-SA-MIB is a vendor-neutral, standards-based MIB from the INCITS T11 committee for managing Fibre Channel Security Protocol (FC-SP) Security Associations (SAs), the cryptographic sessions that secure FC-SP-enabled fabric links. It exposes a per-fabric interface capabilities table (t11FcSpSaIfTable) describing supported security mechanisms (ESP header, CT authentication, IKEv2, IKEv2 authentication) plus replay-prevention and dead-peer-detection settings, alongside tables for SA proposals and negotiated transforms. Its monitoring focus is security/software configuration state: confirming which cryptographic capabilities and replay-protection settings are enabled per fabric interface, and whether dead-peer-detection is functioning, relating to the security posture and link liveness of FC-SP sessions rather than physical hardware sensors. It's explicitly built on the T11 FC-SP specification and complements the related T11-FC-SP-POLICY-MIB, sharing the fabric-indexed structure of Fibre Channel fabric MIBs. It's deployed in SAN environments on Fibre Channel switches/directors implementing FC-SP link security between fabric elements. Engineers implementing or auditing this functionality typically reference the T11-FC-SP-SA-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in T11-FC-SP-SA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based MIB (INCITS T11 FC-SP)
Fibre Channel switches/directors in SAN fabrics

Monitoring Examples

An operator would poll t11FcSpSaIfTable/t11FcSpSaIfEntry by t11FcSpSaIfIndex and t11FcSpSaIfFabricIndex to check which capabilities (t11FcSpSaIfEspHeaderCapab, t11FcSpSaIfIKEv2Capab) are negotiated on a given fabric interface, confirming the expected security mechanism is in use. Checking t11FcSpSaIfReplayPrevention and t11FcSpSaIfReplayWindowSize verifies anti-replay protection is configured as intended, and monitoring t11FcSpSaIfDeadPeerDetections helps detect a stale security association where the peer switch has stopped responding.

What Can Be Monitored

FC-SP security capability negotiation per interface
replay prevention/window settings
dead peer detection status
security association proposals/transforms

Imported Objects

From FC-MGMT-MIB

FcAddressIdOrZero
fcmInstanceIndex	OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
mib-2

From SNMPv2-TC

AutonomousType
RowStatus
StorageType
TimeStamp
TruthValue

From T11-FC-SP-TC-MIB

T11FcRoutingControl
T11FcSaDirection
T11FcSpLifetimeLeft
T11FcSpLifetimeLeftUnits
T11FcSpPrecedence
T11FcSpSecurityProtocolId
T11FcSpTransforms
T11FcSpType
T11FcSpiIndex

From T11-TC-MIB

T11FabricIndex

How to Use in IPNetwork Monitor

Example using t11FcSpSaIfOutDrops OID:

Select a device implementing T11-FC-SP-SA-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type t11FcSpSaIfOutDrops into the Find box to locate it in the OID tree, then select it and click OK. The number of output frames that were dropped, instead of being transmitted on this interface, because they matched an active (at that time) Traffic Selector with an action of 'Drop'. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
t11FcSpSaMIB	1.3.6.1.2.1.179			This MIB module specifies the management information required to manage Security Associations established via Fibre Channel's FC-SP specification. The MIB module consists of six parts: - a per-Fabric table, t11FcSpSaIfTable, of capabilities, parameters, status information, and counters; the counters include non-transient aggregates of per-SA transient counters; - three tables, t11FcSpSaPropTable, t11FcSpSaTSelPropTable, and t11FcSpSaTransTable, specifying the proposals for an FC-SP entity acting as an SA_Initiator to present to the SA_Responder during the negotiation of Security Associations. The same information is also used by an FC-SP entity acting as an SA_Responder to decide what to accept during the negotiation of Security Associations. One of these tables, t11FcSpSaTransTable, is used not only for information about security transforms to propose and to accept, but also as agreed upon during the negotiation of Security Associations; - a table, t11FcSpSaTSelDrByTable, of Traffic Selectors having the security action of 'drop' or 'bypass' to be applied either to ingress traffic that is unprotected by FC-SP, or to all egress traffic; - four tables, t11FcSpSaPairTable, t11FcSpSaTSelNegInTable, t11FcSpSaTSelNegOutTable, and t11FcSpSaTSelSpiTable, containing information about active bidirectional pairs of Security Associations; in particular, t11FcSpSaPairTable has one row per active bidirectional SA pair, t11FcSpSaTSelNegInTable and t11FcSpSaTSelNegOutTable contain information on the Traffic Selectors negotiated on the SAs, and the t11FcSpSaTSelSpiTable is an alternate lookup table such that the Traffic Selector(s) in use on a particular Security Association can be quickly determined based on the (ingress) SPI value; - a table, t11FcSpSaControlTable, of control and other information concerning the generation of notifications for events related to FC-SP Security Associations; - one notification, t11FcSpSaNotifyAuthFailure, generated on the occurrence of an Authentication failure for a received FC-2 or CT_IU frame. Copyright (C) The IETF Trust (2008). This version of this MIB module is part of RFC 5324; see the RFC itself for full legal notices.
t11FcSpSaMIBNotifications	1.3.6.1.2.1.179.0
NTF t11FcSpSaNotifyAuthFailure	1.3.6.1.2.1.179.0.1			When this notification is generated, it indicates the occurrence of an Authentication failure for a received FC-2 or CT_IU frame. The t11FcSpSaControlInboundSpi, t11FcSpSaControlSource, and t11FcSpSaControlDestination objects in the varbindlist are the frame's SPI, source and destination addresses, respectively. t11FcSpSaControlFrame provides the (beginning of the) frame's content if such is available. This notification is generated only for the first occurrence of an Authentication failure on a Fabric within a time window. Subsequent occurrences of an Authentication Failure on the same Fabric within the same time window are counted but suppressed. The value of t11FcSpSaControlElapsed contains (a lower bound on) the elapsed time since the last generation of this notification for the same Fabric. The value of t11FcSpSaControlSuppressed contains the number of generations which were suppressed in the time window after that last generation, or zero if unknown.
NTF t11FcSpSaNotifyLifeExceeded	1.3.6.1.2.1.179.0.2			This notification is generated when the lifetime (in seconds or in passed bytes) of an SA is exceeded, and the SA is either immediately terminated or is terminated because an attempt to renew the SA fails. The values of t11FcSpSaControlLifeExcdSpi and t11FcSpSaControlLifeExcdDir contain the SPI and direction of the terminated SA.
t11FcSpSaMIBObjects	1.3.6.1.2.1.179.1
t11FcSpSaBase	1.3.6.1.2.1.179.1.1
t11FcSpSaIfTable	1.3.6.1.2.1.179.1.1.1		not-accessible	A table containing per-Fabric information related to FC-SP Security Associations.
t11FcSpSaIfEntry	1.3.6.1.2.1.179.1.1.1.1		not-accessible	Each entry contains information related to Security Associations on a particular Fabric, and managed as part of the Fibre Channel management instance identified by fcmInstanceIndex.
NUM t11FcSpSaIfIndex	1.3.6.1.2.1.179.1.1.1.1.1	InterfaceIndexOrZero	not-accessible	This object has a non-zero value to identify a particular interface, or the value zero to indicate that the information in this row applies to all (of the management instance's) interfaces to the particular Fabric. If any row has a non-zero value of t11FcSpSaIfIndex, then all rows for the same Fibre Channel management instance must also have a non-zero value of t11FcSpSaIfIndex and thereby be specific to a particular interface. As and when zero values of t11FcSpSaIfIndex are used in this table, then they must also be used in each other table that has t11FcSpSaIfIndex in its INDEX clause.
T11 t11FcSpSaIfFabricIndex	1.3.6.1.2.1.179.1.1.1.1.2	T11FabricIndex	not-accessible	An index value that uniquely identifies a particular Fabric.
T11 t11FcSpSaIfEspHeaderCapab	1.3.6.1.2.1.179.1.1.1.1.3	T11FcSpTransforms	read-only	A list of the standardized transforms supported by this entity on this interface for ESP_Header protection.
T11 t11FcSpSaIfCTAuthCapab	1.3.6.1.2.1.179.1.1.1.1.4	T11FcSpTransforms	read-only	A list of the standardized transforms supported by this entity on this interface for CT_Authentication protection.
T11 t11FcSpSaIfIKEv2Capab	1.3.6.1.2.1.179.1.1.1.1.5	T11FcSpTransforms	read-only	A list of the standardized transforms supported by this entity on this interface with IKEv2 protection.
T/F t11FcSpSaIfIkev2AuthCapab	1.3.6.1.2.1.179.1.1.1.1.6	TruthValue	read-only	An indication of whether the entity is capable of supporting the IKEv2-AUTH protocol on this interface, i.e., concatenation of Authentication and SA Management Transactions, such that an SA Management Transaction is used to perform both the authentication function and SA management.
STO t11FcSpSaIfStorageType	1.3.6.1.2.1.179.1.1.1.1.7	StorageType	read-write	This object specifies the memory realization of information related to FC-SP Security Associations for interface(s) to a particular Fabric; specifically, for rows created and/or modified in these tables: t11FcSpSaPropTable t11FcSpSaTSelDrByTable t11FcSpSaControlTable and, for modified information contained in the same row as an instance of this object. Even if an instance of this object has the value 'permanent(4)', none of the information defined in this MIB module for interface(s) to the given Fabric need to be writable.
T/F t11FcSpSaIfReplayPrevention	1.3.6.1.2.1.179.1.1.1.1.8	TruthValue	read-write	This object indicates whether anti-replay protection is enabled for frame reception on this interface. Note that the replay-protection mechanism in FC-SP is conceptually similar to the corresponding mechanism in IPsec ESP.
U32 t11FcSpSaIfReplayWindowSize	1.3.6.1.2.1.179.1.1.1.1.9	Unsigned32	read-write	The size of the replay window to be used when anti-replay protection is enabled for frame reception on this interface. Note that the replay-protection mechanism in FC-SP is conceptually similar to the corresponding mechanism in IPsec ESP.
C32 t11FcSpSaIfDeadPeerDetections	1.3.6.1.2.1.179.1.1.1.1.10	Counter32	read-only	The number of times that a dead peer condition has been detected on this interface. This counter has no discontinuities other than those that all Counter32's have when sysUpTime=0.
INT t11FcSpSaIfTerminateAllSas	1.3.6.1.2.1.179.1.1.1.1.11	INTEGER	read-write	Setting this object to 'terminate' is a request to terminate all outstanding Security Associations on this interface. When read, the value of this object is always 'noop'. Setting this object to 'noop' has no effect.
C64 t11FcSpSaIfOutDropsEx	1.3.6.1.2.1.179.1.1.1.1.12	Counter64	read-only	The number of output frames that were dropped, instead of being transmitted on this interface, because they matched an active (at that time) Traffic Selector with an action of 'Drop'. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfOutBypasses	1.3.6.1.2.1.179.1.1.1.1.13	Counter64	read-only	The number of output frames that were transmitted unchanged by FC-SP on this interface because they matched an active (at that time) Traffic Selector with an action of 'Bypass'. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfOutProcesses	1.3.6.1.2.1.179.1.1.1.1.14	Counter64	read-only	The number of output frames that were protected by FC-SP before being transmitted on this interface because they matched an active (at that time) Traffic Selector with an action of 'Process'. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfOutUnMatcheds	1.3.6.1.2.1.179.1.1.1.1.15	Counter64	read-only	The number of frames that were transmitted unchanged by FC-SP on this interface because they did not match any Traffic Selector active at that time. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInUnprotUnmtchDrops	1.3.6.1.2.1.179.1.1.1.1.16	Counter64	read-only	The number of frames received on this interface that were dropped because they were unprotected and did not match any Traffic Selector active at that time. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInDetReplays	1.3.6.1.2.1.179.1.1.1.1.17	Counter64	read-only	The number of times that a replay has been detected on a Security Association that is currently active or was previously active on this interface. Note that a frame that is discarded because it is 'behind' the window, i.e., too old, is counted as a replay. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInUnprotMtchDrops	1.3.6.1.2.1.179.1.1.1.1.18	Counter64	read-only	The number of times that a frame received on this interface was dropped because it matched with a Traffic Selector for a Security Association that was active at the time of receipt but the frame was not protected as negotiated for that Security Association. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInBadXforms	1.3.6.1.2.1.179.1.1.1.1.19	Counter64	read-only	The number of times that a frame received on this interface was dropped because of a failure of one of the transforms negotiated for the Security Association on which it was received. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInGoodXforms	1.3.6.1.2.1.179.1.1.1.1.20	Counter64	read-only	The number of frames received on this interface on a Security Association for which the transforms negotiated for that Security Association were successfully applied, and that matched a Traffic Selector for that Security Association. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaIfInProtUnmtchs	1.3.6.1.2.1.179.1.1.1.1.21	Counter64	read-only	The number of frames received on this interface that were dropped because they did not match any of the Traffic Selectors negotiated for the Security Association on which they were received, even though the Security Association's transforms were successfully applied. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
t11FcSpSaConfig	1.3.6.1.2.1.179.1.2
t11FcSpSaPropTable	1.3.6.1.2.1.179.1.2.1		not-accessible	A table of proposals for an FC-SP entity acting as an SA_Initiator to present to the SA_Responder during the negotiation of Security Associations. This information is also used by an FC-SP entity acting as an SA_Responder to decide what to accept during the negotiation of Security Associations.
t11FcSpSaPropEntry	1.3.6.1.2.1.179.1.2.1.1		not-accessible	Each entry contains information about one proposal for the FC-SP entity to present, or what to accept, during the negotiation of Security Associations on one or more interfaces (identified by t11FcSpSaIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), and managed as part of the Fibre Channel management instance identified by fcmInstanceIndex. The StorageType of a row in this table is specified by the instance of t11FcSpSaIfStorageType that is INDEX-ed by the same values of fcmInstanceIndex, t11FcSpSaIfIndex and t11FcSpSaIfFabricIndex.
U32 t11FcSpSaPropIndex	1.3.6.1.2.1.179.1.2.1.1.1	Unsigned32	not-accessible	An index value that uniquely identifies a particular proposal for use on one or more interfaces to a Fabric.
T11 t11FcSpSaPropSecurityProt	1.3.6.1.2.1.179.1.2.1.1.2	T11FcSpSecurityProtocolId	read-create	The Security Protocol identifier for this proposal, i.e., whether the proposal is for traffic to be protected using ESP_Header or CT_Authentication.
U32 t11FcSpSaPropTSelListIndex	1.3.6.1.2.1.179.1.2.1.1.3	Unsigned32	read-create	When the value of this object is non-zero, it points to the proposal's list of Traffic Selectors. The value must be non-zero in an active row of this table. The identified list is represented by all rows in the t11FcSpSaTSelPropTable for which t11FcSpSaTSelPropListIndex has the same value as this object (and with corresponding values of t11FcSpSaIfIndex and fcmInstanceIndex).
U32 t11FcSpSaPropTransListIndex	1.3.6.1.2.1.179.1.2.1.1.4	Unsigned32	read-create	When the value of this object is non-zero, it points to the proposal's list of Transforms. The value must be non-zero in an active row of this table. The identified list is represented by all rows in the t11FcSpSaTransTable for which t11FcSpSaTransListIndex has the same value as this object (and with corresponding values of t11FcSpSaIfIndex and fcmInstanceIndex).
INT t11FcSpSaPropAcceptAlgorithm	1.3.6.1.2.1.179.1.2.1.1.5	INTEGER	read-create	The algorithm by which an SA_Responder in an SA negotiation decides on which Traffic Selectors to specify in a response to an IKE_Create_Child_SA request. This algorithm is used when the Traffic Selectors specified by an SA_Initiator in an IKE_Create_Child_SA request overlap with this proposal's list of Traffic Selectors: intersection(1) - the SA_Responder specifies the largest subset of what the SA_Initiator proposed, which is also a subset of this proposal's Traffic Selectors. union(2) - the SA_Responder specifies the smallest superset of what the SA_Initiator proposed, which is also a superset of this proposal's Traffic Selectors. other(3) - the SA_Responder uses some other algorithm.
C64 t11FcSpSaPropOutMatchSucceeds	1.3.6.1.2.1.179.1.2.1.1.6	Counter64	read-only	The number of egress frames that have matched a Traffic Selector that was negotiated to select traffic for an SA based on this proposal being accepted. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
ROW t11FcSpSaPropRowStatus	1.3.6.1.2.1.179.1.2.1.1.7	RowStatus	read-create	The status of a row. Values of object instances within an active row can be modified at any time. The status cannot be set to 'active' unless and until the instances of t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex in the row have been set to point to active rows in the t11FcSpSaTSelPropTable and t11FcSpSaTransTable tables, respectively. A row in this table is deleted if the active rows it points to are deleted.
t11FcSpSaTSelPropTable	1.3.6.1.2.1.179.1.2.2		not-accessible	A table containing information about Traffic Selectors to propose and/or to accept during the negotiation of Security Associations.
t11FcSpSaTSelPropEntry	1.3.6.1.2.1.179.1.2.2.1		not-accessible	Each entry contains information about one Traffic Selector within a list of Traffic Selectors to propose, or for use in determining what to accept during Security Association negotiation. One such list is configured for use on a Fabric by configuring the list's value of t11FcSpSaTSelPropListIndex as the value of an instance of t11FcSpSaPropTSelListIndex, for corresponding values of t11FcSpSaIfIndex and fcmInstanceIndex. Further, the proposing and accepting of Traffic Selectors is only done as a part of a proposal specified by a row of the t11FcSpSaPropTable, i.e., in combination with the proposing and accepting of security transforms as specified by the combination of t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex in one row of the t11FcSpSaPropTable. The StorageType of a row in this table is specified by the instance of t11FcSpSaTSelPropStorageType in that row.
U32 t11FcSpSaTSelPropListIndex	1.3.6.1.2.1.179.1.2.2.1.1	Unsigned32	not-accessible	An index value that identifies a particular list of Traffic Selectors.
T11 t11FcSpSaTSelPropPrecedence	1.3.6.1.2.1.179.1.2.2.1.2	T11FcSpPrecedence	not-accessible	The precedence of this Traffic Selector. Each Traffic Selector within a particular list of Traffic Selectors must have a different precedence. If an egress frame matches multiple Traffic Selectors, it should be transmitted on the SA associated with the Traffic Selector having the numerically smallest precedence value.
T11 t11FcSpSaTSelPropDirection	1.3.6.1.2.1.179.1.2.2.1.3	T11FcSaDirection	read-create	An indication of whether this Traffic Selector is to be proposed for ingress or egress traffic.
ADR t11FcSpSaTSelPropStartSrcAddr	1.3.6.1.2.1.179.1.2.2.1.4	FcAddressIdOrZero	read-create	The numerically smallest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelPropEndSrcAddr	1.3.6.1.2.1.179.1.2.2.1.5	FcAddressIdOrZero	read-create	The numerically largest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelPropStartDstAddr	1.3.6.1.2.1.179.1.2.2.1.6	FcAddressIdOrZero	read-create	The numerically smallest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelPropEndDstAddr	1.3.6.1.2.1.179.1.2.2.1.7	FcAddressIdOrZero	read-create	The numerically largest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelPropStartRCtl	1.3.6.1.2.1.179.1.2.2.1.8	T11FcRoutingControl	read-create	The numerically smallest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelPropEndRCtl	1.3.6.1.2.1.179.1.2.2.1.9	T11FcRoutingControl	read-create	The numerically largest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelPropStartType	1.3.6.1.2.1.179.1.2.2.1.10	T11FcSpType	read-create	The numerically smallest of a range of possible 'type' values of frames that will match with this Traffic Selector.
T11 t11FcSpSaTSelPropEndType	1.3.6.1.2.1.179.1.2.2.1.11	T11FcSpType	read-create	The numerically largest of a range of possible 'type' values of frames that will match with this Traffic Selector.
STO t11FcSpSaTSelPropStorageType	1.3.6.1.2.1.179.1.2.2.1.12	StorageType	read-create	This object specifies the memory realization of the information in this row. Even if an instance of this object has the value 'permanent(4)', none of the information in its row needs to be writable.
ROW t11FcSpSaTSelPropRowStatus	1.3.6.1.2.1.179.1.2.2.1.13	RowStatus	read-create	The status of this row. Values of object instances within the row can be modified at any time.
t11FcSpSaTransTable	1.3.6.1.2.1.179.1.2.3		not-accessible	A table containing information about security transforms to propose, to accept and/or agreed upon during the negotiation of Security Associations.
t11FcSpSaTransEntry	1.3.6.1.2.1.179.1.2.3.1		not-accessible	Each entry contains information about one proposal within a list of security transforms to be proposed, to be accepted, or already agreed upon, for use on a pair of Security Associations on one or more interfaces (identified by t11FcSpSaIfIndex), managed as part of the Fibre Channel management instance identified by fcmInstanceIndex. One such list is configured to be proposed or accepted for use on a Fabric, by having the list's value of t11FcSpSaTransListIndex be the value of an instance of t11FcSpSaPropTransListIndex for that Fabric. Further, the proposing and accepting of security transforms is only done as a part of a proposal specified by a row of the t11FcSpSaPropTable, i.e., in combination with the proposing and accepting of Traffic Selectors as specified by the combination of t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex in one row of the t11FcSpSaPropTable. The security (encryption and integrity) transform in use on an SA pair is indicated by having the pair's values of t11FcSpSaPairTransListIndex and t11FcSpSaPairTransIndex contain the values of t11FcSpSaTransListIndex and t11FcSpSaTransIndex for the transform's row in this table. The StorageType of a row in this table is specified by the instance of t11FcSpSaTransStorageType in that row.
U32 t11FcSpSaTransListIndex	1.3.6.1.2.1.179.1.2.3.1.1	Unsigned32	not-accessible	An index value that uniquely identifies a particular list of security transforms to be proposed, to be accepted, or already agreed upon.
U32 t11FcSpSaTransIndex	1.3.6.1.2.1.179.1.2.3.1.2	Unsigned32	not-accessible	An index value that uniquely identifies one security transform within a list identified by t11FcSpSaTransListIndex.
T11 t11FcSpSaTransSecurityProt	1.3.6.1.2.1.179.1.2.3.1.3	T11FcSpSecurityProtocolId	read-create	The Security Protocol identifier that indicates whether this transform is for traffic to be protected using ESP_Header or using CT_Authentication.
OID t11FcSpSaTransEncryptAlg	1.3.6.1.2.1.179.1.2.3.1.4	AutonomousType	read-create	The Encryption Algorithm for this transform.
U32 t11FcSpSaTransEncryptKeyLen	1.3.6.1.2.1.179.1.2.3.1.5	Unsigned32	read-create	The key length in bits to be used with an encryption algorithm that has a variable length key. This object is ignored when the corresponding instance of t11FcSpSaTransEncryptAlg specifies an algorithm with a fixed length key.
OID t11FcSpSaTransIntegrityAlg	1.3.6.1.2.1.179.1.2.3.1.6	AutonomousType	read-create	The Integrity Algorithm for this transform.
STO t11FcSpSaTransStorageType	1.3.6.1.2.1.179.1.2.3.1.7	StorageType	read-create	This object specifies the memory realization of the information in this row. Even if an instance of this object has the value 'permanent(4)', none of the information in its row needs to be writable.
ROW t11FcSpSaTransRowStatus	1.3.6.1.2.1.179.1.2.3.1.8	RowStatus	read-create	The status of this row. When an instance of t11FcSpSaPairTransListIndex points to a row in this table, values of object instances in the row cannot be modified nor can the row be deleted. Otherwise, a row can be modified or deleted at any time.
t11FcSpSaTSelDrByTable	1.3.6.1.2.1.179.1.2.4		not-accessible	A table containing Traffic Selectors to select which traffic is to be dropped or is to bypass further security processing.
t11FcSpSaTSelDrByEntry	1.3.6.1.2.1.179.1.2.4.1		not-accessible	Each entry represents one Traffic Selector having the security action of 'drop' or 'bypass', which is applied based on a precedence value, either to ingress traffic that is unprotected by FC-SP, or to all egress traffic on one or more interfaces (identified by t11FcSpSaIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), and managed as part of the Fibre Channel management instance identified by fcmInstanceIndex. The StorageType of a row in this table is specified by the instance of t11FcSpSaIfStorageType that is INDEX-ed by the same values of fcmInstanceIndex, t11FcSpSaIfIndex and t11FcSpSaIfFabricIndex.
T11 t11FcSpSaTSelDrByDirection	1.3.6.1.2.1.179.1.2.4.1.1	T11FcSaDirection	not-accessible	An indication of whether this Traffic Selector is for ingress or egress traffic.
T11 t11FcSpSaTSelDrByPrecedence	1.3.6.1.2.1.179.1.2.4.1.2	T11FcSpPrecedence	not-accessible	The precedence of this Traffic Selector. If and when a frame is compared against multiple Traffic Selectors, and multiple of them have a match with the frame, the security action to be taken for the frame is that specified for the matching Traffic Selector having the numerically smallest precedence value.
INT t11FcSpSaTSelDrByAction	1.3.6.1.2.1.179.1.2.4.1.3	INTEGER	read-create	The security action to be taken for a frame that matches this Traffic Selector.
ADR t11FcSpSaTSelDrByStartSrcAddr	1.3.6.1.2.1.179.1.2.4.1.4	FcAddressIdOrZero	read-create	The numerically smallest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelDrByEndSrcAddr	1.3.6.1.2.1.179.1.2.4.1.5	FcAddressIdOrZero	read-create	The numerically largest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelDrByStartDstAddr	1.3.6.1.2.1.179.1.2.4.1.6	FcAddressIdOrZero	read-create	The numerically smallest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelDrByEndDstAddr	1.3.6.1.2.1.179.1.2.4.1.7	FcAddressIdOrZero	read-create	The numerically largest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelDrByStartRCtl	1.3.6.1.2.1.179.1.2.4.1.8	T11FcRoutingControl	read-create	The numerically smallest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelDrByEndRCtl	1.3.6.1.2.1.179.1.2.4.1.9	T11FcRoutingControl	read-create	The numerically largest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelDrByStartType	1.3.6.1.2.1.179.1.2.4.1.10	T11FcSpType	read-create	The numerically smallest of a range of possible 'type' values of frames that will match with this Traffic Selector.
T11 t11FcSpSaTSelDrByEndType	1.3.6.1.2.1.179.1.2.4.1.11	T11FcSpType	read-create	The numerically largest of a range of possible 'type' values of frames that will match with this Traffic Selector.
C64 t11FcSpSaTSelDrByMatches	1.3.6.1.2.1.179.1.2.4.1.12	Counter64	read-only	The number of frames for which the action specified by the corresponding instance of t11FcSpSaTSelDrByAction was taken because of a match with this Traffic Selector. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
ROW t11FcSpSaTSelDrByRowStatus	1.3.6.1.2.1.179.1.2.4.1.13	RowStatus	read-create	The status of this row. Values of object instances within the row can be modified at any time.
t11FcSpSaActive	1.3.6.1.2.1.179.1.3
t11FcSpSaPairTable	1.3.6.1.2.1.179.1.3.1		not-accessible	A table containing information about active bidirectional pairs of Security Associations.
t11FcSpSaPairEntry	1.3.6.1.2.1.179.1.3.1.1		not-accessible	Each entry contains information about one active bidirectional pair of Security Associations on an interface to a particular Fabric (identified by t11FcSpSaIfFabricIndex), managed as part of the Fibre Channel management instance identified by fcmInstanceIndex.
NUM t11FcSpSaPairIfIndex	1.3.6.1.2.1.179.1.3.1.1.1	InterfaceIndex	not-accessible	This object identifies the interface to the particular Fabric on which this SA pair is active.
T11 t11FcSpSaPairInboundSpi	1.3.6.1.2.1.179.1.3.1.1.2	T11FcSpiIndex	not-accessible	The SPI value that is used to indicate that an incoming frame was received on the ingress SA of this SA pair.
T11 t11FcSpSaPairSecurityProt	1.3.6.1.2.1.179.1.3.1.1.3	T11FcSpSecurityProtocolId	read-only	The object indicates whether this SA uses ESP_Header to protect FC-2 frames, or CT_Authentication to protect Common Transport Information Units (CT_IUs).
U32 t11FcSpSaPairTransListIndex	1.3.6.1.2.1.179.1.3.1.1.4	Unsigned32	read-only	The combination of this value and the value of the corresponding instance of t11FcSpSaPairTransIndex identify the row in the t11FcSpSaTransTable that contains the transforms that are in use on this SA pair.
U32 t11FcSpSaPairTransIndex	1.3.6.1.2.1.179.1.3.1.1.5	Unsigned32	read-only	The combination of this value and the value of the corresponding instance of t11FcSpSaPairTransListIndex identify the row in the t11FcSpSaTransTable that contains the transforms that are in use on this SA pair.
T11 t11FcSpSaPairLifetimeLeft	1.3.6.1.2.1.179.1.3.1.1.6	T11FcSpLifetimeLeft	read-only	The remaining lifetime of this SA pair, given in the units specified by the value of the corresponding instance of t11FcSpSaPairLifetimeLeft.
T11 t11FcSpSaPairLifetimeLeftUnits	1.3.6.1.2.1.179.1.3.1.1.7	T11FcSpLifetimeLeftUnits	read-only	The units in which the value of the corresponding instance of t11FcSpSaPairLifetimeLeft specifies the remaining lifetime of this SA pair.
INT t11FcSpSaPairTerminate	1.3.6.1.2.1.179.1.3.1.1.8	INTEGER	read-write	Setting this object to 'terminate' is a request to terminate this pair of Security Associations. When read, the value of this object is always 'noop'. Setting this object to 'noop' has no effect.
C64 t11FcSpSaPairInProtUnMatchs	1.3.6.1.2.1.179.1.3.1.1.9	Counter64	read-only	The number of frames received on this SA for which the SA's transforms were successfully applied to the frame, but the frame was still dropped because it did not match any of the SA's ingress Traffic Selectors. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaPairInDetReplays	1.3.6.1.2.1.179.1.3.1.1.10	Counter64	read-only	The number of times that a replay has been detected on this Security Association. Note that a frame that is discarded because it is 'behind' the window, i.e., too old, is counted as a replay. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaPairInBadXforms	1.3.6.1.2.1.179.1.3.1.1.11	Counter64	read-only	The number of times that a received frame was dropped because one of the transforms negotiated for this Security Association failed. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
C64 t11FcSpSaPairInGoodXforms	1.3.6.1.2.1.179.1.3.1.1.12	Counter64	read-only	The number of received frames for which the transforms negotiated for this Security Association, were successfully applied. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
t11FcSpSaTSelNegInTable	1.3.6.1.2.1.179.1.3.2		not-accessible	A table containing information about ingress Traffic Selectors that are in use on active Security Associations.
t11FcSpSaTSelNegInEntry	1.3.6.1.2.1.179.1.3.2.1		not-accessible	Each entry contains information about one ingress Traffic Selector that is in use on an active Security Association on an interface (identified by t11FcSpSaPairIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), managed as part of the Fibre Channel management instance identified by fcmInstanceIndex.
U32 t11FcSpSaTSelNegInIndex	1.3.6.1.2.1.179.1.3.2.1.1	Unsigned32	not-accessible	An index value to distinguish an ingress Traffic Selector from all others currently in use by Security Associations on the same interface to a particular Fabric.
T11 t11FcSpSaTSelNegInInboundSpi	1.3.6.1.2.1.179.1.3.2.1.2	T11FcSpiIndex	read-only	The SPI of the ingress SA on which this Traffic Selector is in use. This value can be used to find the SA pair's row in the t11FcSpSaPairTable.
ADR t11FcSpSaTSelNegInStartSrcAddr	1.3.6.1.2.1.179.1.3.2.1.3	FcAddressIdOrZero	read-only	The numerically smallest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegInEndSrcAddr	1.3.6.1.2.1.179.1.3.2.1.4	FcAddressIdOrZero	read-only	The numerically largest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegInStartDstAddr	1.3.6.1.2.1.179.1.3.2.1.5	FcAddressIdOrZero	read-only	The numerically smallest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegInEndDstAddr	1.3.6.1.2.1.179.1.3.2.1.6	FcAddressIdOrZero	read-only	The numerically largest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegInStartRCtl	1.3.6.1.2.1.179.1.3.2.1.7	T11FcRoutingControl	read-only	The numerically smallest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegInEndRCtl	1.3.6.1.2.1.179.1.3.2.1.8	T11FcRoutingControl	read-only	The numerically largest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegInStartType	1.3.6.1.2.1.179.1.3.2.1.9	T11FcSpType	read-only	The numerically smallest of a range of possible 'type' values of frames that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegInEndType	1.3.6.1.2.1.179.1.3.2.1.10	T11FcSpType	read-only	The numerically largest of a range of possible 'type' values of frames that will match with this Traffic Selector.
C64 t11FcSpSaTSelNegInUnpMtchDrops	1.3.6.1.2.1.179.1.3.2.1.11	Counter64	read-only	The number of times that a received frame was dropped because it matched with this Traffic Selector but the frame was not protected as negotiated for the Security Association identified by t11FcSpSaTSelNegInInboundSpi. This counter has no discontinuities other than those that all Counter64's have when sysUpTime=0.
t11FcSpSaTSelNegOutTable	1.3.6.1.2.1.179.1.3.3		not-accessible	A table containing information about egress Traffic Selectors that are in use on active Security Associations.
t11FcSpSaTSelNegOutEntry	1.3.6.1.2.1.179.1.3.3.1		not-accessible	Each entry contains information about one egress Traffic Selector that is in use on an active Security Association on an interface (identified by t11FcSpSaPairIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), managed as part of the Fibre Channel management instance identified by fcmInstanceIndex.
T11 t11FcSpSaTSelNegOutPrecedence	1.3.6.1.2.1.179.1.3.3.1.1	T11FcSpPrecedence	not-accessible	The precedence of this Traffic Selector. If and when a frame is compared against multiple Traffic Selectors, and multiple of them have a match with the frame, the security action to be taken for the frame is that specified for the matching Traffic Selector having the numerically smallest precedence value.
T11 t11FcSpSaTSelNegOutInboundSpi	1.3.6.1.2.1.179.1.3.3.1.2	T11FcSpiIndex	read-only	The SPI of the ingress SA of the SA pair for which this Traffic Selector is in use on the egress SA. This value can be used to find the SA pair's row in the t11FcSpSaPairTable.
ADR t11FcSpSaTSelNegOutStartSrcAddr	1.3.6.1.2.1.179.1.3.3.1.3	FcAddressIdOrZero	read-only	The numerically smallest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegOutEndSrcAddr	1.3.6.1.2.1.179.1.3.3.1.4	FcAddressIdOrZero	read-only	The numerically largest 24-bit value of a source address (S_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegOutStartDstAddr	1.3.6.1.2.1.179.1.3.3.1.5	FcAddressIdOrZero	read-only	The numerically smallest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
ADR t11FcSpSaTSelNegOutEndDstAddr	1.3.6.1.2.1.179.1.3.3.1.6	FcAddressIdOrZero	read-only	The numerically largest 24-bit value of a destination address (D_ID) of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegOutStartRCtl	1.3.6.1.2.1.179.1.3.3.1.7	T11FcRoutingControl	read-only	The numerically smallest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegOutEndRCtl	1.3.6.1.2.1.179.1.3.3.1.8	T11FcRoutingControl	read-only	The numerically largest 8-bit value contained within a Routing Control (R_CTL) field of a frame that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegOutStartType	1.3.6.1.2.1.179.1.3.3.1.9	T11FcSpType	read-only	The numerically smallest of a range of possible 'type' values of frames that will match with this Traffic Selector.
T11 t11FcSpSaTSelNegOutEndType	1.3.6.1.2.1.179.1.3.3.1.10	T11FcSpType	read-only	The numerically largest of a range of possible 'type' values of frames that will match with this Traffic Selector.
t11FcSpSaTSelSpiTable	1.3.6.1.2.1.179.1.3.4		not-accessible	A table identifying the Traffic Selectors in use on particular Security Associations, INDEX-ed by their (ingress) SPI values.
t11FcSpSaTSelSpiEntry	1.3.6.1.2.1.179.1.3.4.1		not-accessible	Each entry identifies one Traffic Selector in use on an SA pair on the interface (identified by t11FcSpSaPairIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), and managed as part of the Fibre Channel management instance identified by fcmInstanceIndex.
T11 t11FcSpSaTSelSpiInboundSpi	1.3.6.1.2.1.179.1.3.4.1.1	T11FcSpiIndex	not-accessible	An SPI value that identifies the ingress Security Association of a particular SA pair.
U32 t11FcSpSaTSelSpiTrafSelIndex	1.3.6.1.2.1.179.1.3.4.1.2	Unsigned32	not-accessible	An index value that distinguishes between the (potentially multiple) Traffic Selectors in use on this Security Association pair.
T11 t11FcSpSaTSelSpiDirection	1.3.6.1.2.1.179.1.3.4.1.3	T11FcSaDirection	read-only	This object indicates whether this Traffic Selector is being used for ingress or for egress traffic.
U32 t11FcSpSaTSelSpiTrafSelPtr	1.3.6.1.2.1.179.1.3.4.1.4	Unsigned32	read-only	This object contains a pointer into another table that can be used to obtain more information about this Traffic Selector. If the corresponding instance of t11FcSpSaTSelSpiDirection has the value 'egress', then this object contains the value of t11FcSpSaTSelNegOutPrecedence in the row of t11FcSpSaTSelNegOutTable, which contains more information. If the corresponding instance of t11FcSpSaTSelSpiDirection has the value 'ingress', then this object contains the value of t11FcSpSaTSelNegInIndex that identifies the row in t11FcSpSaTSelNegInTable containing more information.
t11FcSpSaControl	1.3.6.1.2.1.179.1.4
t11FcSpSaControlTable	1.3.6.1.2.1.179.1.4.1		not-accessible	A table of control and other information concerning the generation of notifications for events related to FC-SP Security Associations.
t11FcSpSaControlEntry	1.3.6.1.2.1.179.1.4.1.1		not-accessible	Each entry identifies information for the one or more interfaces (identified by t11FcSpSaIfIndex) to a particular Fabric (identified by t11FcSpSaIfFabricIndex), and managed as part of the Fibre Channel management instance identified by fcmInstanceIndex. The StorageType of a row in this table is specified by the instance of t11FcSpSaIfStorageType that is INDEX-ed by the same values of fcmInstanceIndex, t11FcSpSaIfIndex, and t11FcSpSaIfFabricIndex.
T/F t11FcSpSaControlAuthFailEnable	1.3.6.1.2.1.179.1.4.1.1.1	TruthValue	read-write	This object specifies whether a t11FcSpSaNotifyAuthFailure notification should be generated for the first occurrence of an Authentication failure within a time window for this Fabric.
T11 t11FcSpSaControlInboundSpi	1.3.6.1.2.1.179.1.4.1.1.2	T11FcSpiIndex	read-only	The SPI value of the ingress Security Association on which was received the last frame for which a t11FcSpSaNotifyAuthFailure was generated. If no t11FcSpSaNotifyAuthFailure notifications have been generated, the value of this object is zero.
ADR t11FcSpSaControlSource	1.3.6.1.2.1.179.1.4.1.1.3	FcAddressIdOrZero	read-only	The S_ID contained in the last frame for which a t11FcSpSaNotifyAuthFailure was generated. If no t11FcSpSaNotifyAuthFailure notifications have been generated, the value of this object is the zero-length string.
ADR t11FcSpSaControlDestination	1.3.6.1.2.1.179.1.4.1.1.4	FcAddressIdOrZero	read-only	The D_ID contained in the last frame for which a t11FcSpSaNotifyAuthFailure was generated. If no t11FcSpSaNotifyAuthFailure notifications have been generated, the value of this object is the zero-length string.
OCT t11FcSpSaControlFrame	1.3.6.1.2.1.179.1.4.1.1.5	OCTET STRING	read-only	The binary content of the last frame for which a t11FcSpSaNotifyAuthFailure was generated. If more than 256 bytes of the frame are available, then this object contains the first 256 bytes. If less than 256 bytes of the frame are available, then this object contains the first N bytes, where N is greater or equal to zero. If no t11FcSpSaNotifyAuthFailure notifications have been generated, the value of this object is the zero-length string.
TIK t11FcSpSaControlElapsed	1.3.6.1.2.1.179.1.4.1.1.6	TimeTicks	read-only	The elapsed time since the last generation of a t11FcSpSaNotifyAuthFailure notification on the same Fabric, or the value of sysUpTime if no t11FcSpSaNotifyAuthFailure notifications have been generated since the last restart.
G32 t11FcSpSaControlSuppressed	1.3.6.1.2.1.179.1.4.1.1.7	Gauge32	read-only	The number of occurrences of an Authentication failure on a Fabric that were suppressed because they occurred on the same Fabric within the same time window as a previous Authentication failure for which a t11FcSpSaNotifyAuthFailure notification was generated. The value of this object is reset to zero on a restart of the network management subsystem, and whenever a t11FcSpSaNotifyAuthFailure notification is generated. In the event that the value of this object reaches its maximum value, it remains at that value until it is reset on the generation of the next t11FcSpSaNotifyAuthFailure notification.
U32 t11FcSpSaControlWindow	1.3.6.1.2.1.179.1.4.1.1.8	Unsigned32	read-write	The length of a time window that begins when a t11FcSpSaNotifyAuthFailure notification is generated for any Security Association on a particular Fabric. For the duration of the time window, further Authentication failures occurring for the same Security Association are counted but no t11FcSpSaNotifyAuthFailure notification is generated. When this object is modified before the end of a time window, that time window is immediately terminated, i.e., the next Authentication failure on the relevant Fabric after the modification will cause a new time window to begin with the new length.
U32 t11FcSpSaControlMaxNotifs	1.3.6.1.2.1.179.1.4.1.1.9	Unsigned32	read-write	The maximum number of t11FcSpSaNotifyAuthFailure notifications to be generated per Fabric within a t11FcSpSaControlWindow time window. Subsequent Authentication failures occurring on the same Fabric in the same time window are counted, but no t11FcSpSaNotifyAuthFailure notification is generated. When this object is modified before the end of a time window, that time window is immediately terminated, i.e., the next Authentication failure on the relevant Fabric after the modification will cause a new time window to begin with the new length.
T/F t11FcSpSaControlLifeExcdEnable	1.3.6.1.2.1.179.1.4.1.1.10	TruthValue	read-write	This object specifies whether t11FcSpSaNotifyLifeExceeded notifications should be generated for this Fabric.
T11 t11FcSpSaControlLifeExcdSpi	1.3.6.1.2.1.179.1.4.1.1.11	T11FcSpiIndex	read-only	The SPI of the SA that was most recently terminated because its lifetime (in seconds or in passed bytes) was exceeded. Such terminations include those due to a failed attempt to renew an SA after its lifetime was exceeded.
T11 t11FcSpSaControlLifeExcdDir	1.3.6.1.2.1.179.1.4.1.1.12	T11FcSaDirection	read-only	The direction of frame transmission on the SA that was most recently terminated because its lifetime (in seconds or in passed bytes) was exceeded.
TIM t11FcSpSaControlLifeExcdTime	1.3.6.1.2.1.179.1.4.1.1.13	TimeStamp	read-only	The time of the most recent termination of an SA due to its lifetime (in seconds or in passed bytes) being exceeded. Such terminations include those due to a failed attempt to renew an SA after its lifetime was exceeded.
t11FcSpSaMIBConformance	1.3.6.1.2.1.179.2
t11FcSpSaMIBCompliances	1.3.6.1.2.1.179.2.1
t11FcSpSaMIBCompliance	1.3.6.1.2.1.179.2.1.1			The compliance statement for entities that implement FC-SP Security Associations.
t11FcSpSaMIBGroups	1.3.6.1.2.1.179.2.2
t11FcSpSaCapabilityGroup	1.3.6.1.2.1.179.2.2.1			A collection of objects containing information related to capabilities of FC-SP entities.
t11FcSpSaParamStatusGroup	1.3.6.1.2.1.179.2.2.2			A collection of objects containing parameters and status information related to FC-SP entities.
t11FcSpSaSummaryCountGroup	1.3.6.1.2.1.179.2.2.3			A collection of objects containing summary counters for FC-SP Security Associations.
t11FcSpSaProposalGroup	1.3.6.1.2.1.179.2.2.4			A collection of objects containing information related to making and accepting proposals for FC-SP Security Associations.
t11FcSpSaDropBypassGroup	1.3.6.1.2.1.179.2.2.5			A collection of objects containing information about Traffic Selectors of traffic to drop or bypass for FC-SP Security.
t11FcSpSaActiveGroup	1.3.6.1.2.1.179.2.2.6			A collection of objects containing information related to currently active FC-SP Security Associations.
t11FcSpSaNotifInfoGroup	1.3.6.1.2.1.179.2.2.7			A collection of objects containing information related to notifications of events concerning FC-SP Security Associations.
t11FcSpSaNotificationGroup	1.3.6.1.2.1.179.2.2.8			A collection of notifications of events concerning FC-SP Security Associations.

RFC description

SNMP MIB defined in RFC 5324 for managing Fibre Channel Security Protocols (FC-SP), including Security Association capabilities, parameters, and traffic selectors for FC-SP entity negotiation.

Start monitoring vendor-neutral, standards-based MIB (INCITS T11 FC-SP), Fibre Channel switches/directors (security-association/cryptographic capability status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download T11-FC-SP-SA-MIB