All MIBs › STN-POLICY-MIB
Organization: Spring Tide Networks, Inc.
Last Updated: 2000-12-06
Category: Security / Access Control, Spring Tide Networks
Description: Manages Spring Tide Networks traffic policy rules, classifiers, and associated action configurations.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is STN-POLICY-MIB?
STN-POLICY-MIB is a vendor MIB from Spring Tide Networks for configuring traffic policy rules, classifiers, and their associated actions on their broadband aggregation platforms, including a policy-manager class table (stnPmClassTable) used to define traffic classification classes. It exposes configuration data describing how traffic is classified and what actions (such as shaping, marking, or filtering) are applied to matched traffic classes. This is primarily a software/configuration-status monitoring MIB: administrators use it to confirm traffic policies and classifiers are correctly defined and applied, rather than to read physical sensor data, ensuring QoS or filtering behavior matches intended network policy. It depends on SPRING-TIDE-NETWORKS-SMI for its enterprise OID root and is designed to work in concert with STN-IF-MIB and STN-ATM-MIB, since policies are ultimately applied to traffic on those interfaces/circuits. Typical deployment context is carrier broadband aggregation networks where Spring Tide equipment enforces differentiated traffic handling policies across subscriber or trunk interfaces, and administrators can download the STN-POLICY-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in STN-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Spring Tide Networks broadband aggregation equipment
Monitoring Examples
An admin would poll stnPmClassTable (and its associated entry rows) to confirm that traffic classification classes are defined as expected, checking each class's matching criteria and assigned action. Cross-referencing a policy class against STN-IF-MIB interface statistics on the port where it's applied would reveal whether the expected traffic shaping or filtering behavior is actually occurring. An unexpected absence of a class row or a misconfigured classifier would explain why traffic isn't being treated according to its intended policy.
What Can Be Monitored
- traffic policy class definitions
- classifier match criteria
- policy action assignments (shaping/marking/filtering)
- policy application per interface
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
| stnSystems | OBJECT-IDENTITY |
From STN-ROUTER-MIB
| stnRouterIndex | OBJECT-TYPE |
How to Use in IPNetwork Monitor
Example using stnPmClassStatsHighWater OID:
Select a Spring Tide Networks broadband aggregation equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type stnPmClassStatsHighWater into the Find box to locate it in the OID tree, then select it and click OK. The historical maximum number of packets that were queued for this class since the system was last reinitialized. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the value climbs close to a level you consider a practical ceiling for this device, since a rising peak often signals sustained load growth worth planning capacity around. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| stnPm | 1.3.6.1.4.1.3551.2.11 | Added stnPmClassTable | ||
| stnPmObjects | 1.3.6.1.4.1.3551.2.11.1 | |||
| stnPmService | 1.3.6.1.4.1.3551.2.11.1.1 | |||
| stnPmServiceTable | 1.3.6.1.4.1.3551.2.11.1.1.1 | not-accessible | A list of PM service entries. | |
| stnPmServiceEntry | 1.3.6.1.4.1.3551.2.11.1.1.1.1 | not-accessible | Entry contains information about a particular policy manager service. | |
| I32 stnPmServiceIndex | 1.3.6.1.4.1.3551.2.11.1.1.1.1.1 | Integer32 | read-only | Index into service table |
| STR stnPmServiceName | 1.3.6.1.4.1.3551.2.11.1.1.1.1.2 | DisplayString | read-only | Name of service |
| I32 stnPmServiceIdleTimeout | 1.3.6.1.4.1.3551.2.11.1.1.1.1.3 | Integer32 | read-only | Idle timeout for service |
| I32 stnPmServiceNumPolicies | 1.3.6.1.4.1.3551.2.11.1.1.1.1.4 | Integer32 | read-only | Number of policies in this service |
| T/F stnPmServiceEnabled | 1.3.6.1.4.1.3551.2.11.1.1.1.1.5 | TruthValue | read-only | Flag to indicate if service is enabled |
| INT stnPmServiceType | 1.3.6.1.4.1.3551.2.11.1.1.1.1.7 | INTEGER | read-only | Type of service |
| I32 stnPmServiceFirewallID | 1.3.6.1.4.1.3551.2.11.1.1.1.1.8 | Integer32 | read-only | Instance of service's firewall record |
| stnPmPolicy | 1.3.6.1.4.1.3551.2.11.1.2 | |||
| stnPmPolicyTable | 1.3.6.1.4.1.3551.2.11.1.2.1 | not-accessible | A list of policy entries. | |
| stnPmPolicyEntry | 1.3.6.1.4.1.3551.2.11.1.2.1.1 | not-accessible | Entry contains information about a particular policy. | |
| I32 stnPmPolicyServiceIndex | 1.3.6.1.4.1.3551.2.11.1.2.1.1.1 | Integer32 | read-only | Service index of policy |
| I32 stnPmPolicyIndex | 1.3.6.1.4.1.3551.2.11.1.2.1.1.2 | Integer32 | read-only | Policy index of policy |
| STR stnPmPolicyName | 1.3.6.1.4.1.3551.2.11.1.2.1.1.3 | DisplayString | read-only | Policy name |
| STN stnPmPolicySrcAddrMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.4 | StnPmPolicyMatchType | read-only | Type of match for source address |
| IP stnPmPolicySrcAddr | 1.3.6.1.4.1.3551.2.11.1.2.1.1.5 | IpAddress | read-only | Source address to match |
| IP stnPmPolicySrcMask | 1.3.6.1.4.1.3551.2.11.1.2.1.1.6 | IpAddress | read-only | Source IP netmask to match |
| IP stnPmPolicySrcEndAddr | 1.3.6.1.4.1.3551.2.11.1.2.1.1.7 | IpAddress | read-only | End of source address range to match |
| STN stnPmPolicyDestAddrMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.8 | StnPmPolicyMatchType | read-only | Type of match for source address |
| IP stnPmPolicyDestAddr | 1.3.6.1.4.1.3551.2.11.1.2.1.1.9 | IpAddress | read-only | Source address to match |
| IP stnPmPolicyDestMask | 1.3.6.1.4.1.3551.2.11.1.2.1.1.10 | IpAddress | read-only | Source IP netmask to match |
| IP stnPmPolicyDestEndAddr | 1.3.6.1.4.1.3551.2.11.1.2.1.1.11 | IpAddress | read-only | End of source address range to match |
| STN stnPmPolicySrcPortMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.12 | StnPmPolicyMatchType | read-only | Type of match for source port |
| I32 stnPmPolicySrcPort | 1.3.6.1.4.1.3551.2.11.1.2.1.1.13 | Integer32 | read-only | Source port to match |
| I32 stnPmPolicySrcEndPort | 1.3.6.1.4.1.3551.2.11.1.2.1.1.14 | Integer32 | read-only | End of source port range to match |
| STN stnPmPolicyDestPortMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.15 | StnPmPolicyMatchType | read-only | Type of match for destination port |
| I32 stnPmPolicyDestPort | 1.3.6.1.4.1.3551.2.11.1.2.1.1.16 | Integer32 | read-only | Destination port to match |
| I32 stnPmPolicyDestEndPort | 1.3.6.1.4.1.3551.2.11.1.2.1.1.17 | Integer32 | read-only | End of destination port range to match |
| STN stnPmPolicyProtocolMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.18 | StnPmPolicyMatchType | read-only | Type of match for protocol |
| INT stnPmPolicyProtocol | 1.3.6.1.4.1.3551.2.11.1.2.1.1.19 | INTEGER | read-only | Protocol to match |
| INT stnPmPolicyAction | 1.3.6.1.4.1.3551.2.11.1.2.1.1.20 | INTEGER | read-only | Type of action to take upon policy match |
| I32 stnPmPolicyActionID | 1.3.6.1.4.1.3551.2.11.1.2.1.1.21 | Integer32 | read-only | Configuration ID of action record |
| STN stnPmPolicyDirection | 1.3.6.1.4.1.3551.2.11.1.2.1.1.22 | StnPmDirection | read-only | Direction of policy |
| T/F stnPmPolicyCreateMirror | 1.3.6.1.4.1.3551.2.11.1.2.1.1.23 | TruthValue | read-only | Mirror policy flag |
| STN stnPmPolicySrcAddrSelector | 1.3.6.1.4.1.3551.2.11.1.2.1.1.24 | StnPmSelectorType | read-only | Source selector to choose for policy matching |
| STN stnPmPolicyDestAddrSelector | 1.3.6.1.4.1.3551.2.11.1.2.1.1.25 | StnPmSelectorType | read-only | Destination selector to choose for policy matching |
| T/F stnPmPolicyEnabled | 1.3.6.1.4.1.3551.2.11.1.2.1.1.26 | TruthValue | read-only | Flag to indicate if policy is enabled |
| I32 stnPmPolicyMatches | 1.3.6.1.4.1.3551.2.11.1.2.1.1.27 | Integer32 | read-only | Number of times policy search matched this policy |
| I32 stnPmPolicyMisses | 1.3.6.1.4.1.3551.2.11.1.2.1.1.28 | Integer32 | read-only | Number of times policy search did not match this policy |
| C64 stnPmPolicyMarkedOctets | 1.3.6.1.4.1.3551.2.11.1.2.1.1.29 | Counter64 | read-only | Number of octets that have been marked for this policy. |
| C64 stnPmPolicyMarkedPkts | 1.3.6.1.4.1.3551.2.11.1.2.1.1.30 | Counter64 | read-only | Number of packets that have been marked for this policy. |
| U32 stnPmPolicyIcmpTypes | 1.3.6.1.4.1.3551.2.11.1.2.1.1.31 | Unsigned32 | read-only | ICMP Types matching the policy entry expressed as bit-map. |
| STN stnPmPolicyTosByteMatchType | 1.3.6.1.4.1.3551.2.11.1.2.1.1.32 | StnPmPolicyMatchType | read-only | Type of match for TOS Byte |
| INT stnPmPolicyTosByteValue | 1.3.6.1.4.1.3551.2.11.1.2.1.1.33 | INTEGER | read-only | Value containing bits to set in TOS Byte |
| INT stnPmPolicyTosByteMask | 1.3.6.1.4.1.3551.2.11.1.2.1.1.34 | INTEGER | read-only | Mask indicating bits to match in TOS byte |
| I32 stnPmPolicyMarkerID | 1.3.6.1.4.1.3551.2.11.1.2.1.1.35 | Integer32 | read-only | Configuration ID of marker to apply |
| I32 stnPmPolicyTxclassID | 1.3.6.1.4.1.3551.2.11.1.2.1.1.36 | Integer32 | read-only | Configuration ID of transmit class to assign packet to |
| stnPmPreference | 1.3.6.1.4.1.3551.2.11.1.3 | |||
| stnPmPreferenceTable | 1.3.6.1.4.1.3551.2.11.1.3.1 | not-accessible | Entry contains information about a particular preference entry. | |
| stnPmPreferenceEntry | 1.3.6.1.4.1.3551.2.11.1.3.1.1 | not-accessible | Entry contains information about a particular preference. | |
| I32 stnPmPreferenceIndex | 1.3.6.1.4.1.3551.2.11.1.3.1.1.1 | Integer32 | read-only | Preference index |
| I32 stnPmPreferenceNum | 1.3.6.1.4.1.3551.2.11.1.3.1.1.2 | Integer32 | read-only | Preference number |
| STN stnPmPreferenceAhAlg | 1.3.6.1.4.1.3551.2.11.1.3.1.1.3 | StnPmAuthAlg | read-only | AH authentication algorithm |
| STN stnPmPreferenceEspAuthAlg | 1.3.6.1.4.1.3551.2.11.1.3.1.1.4 | StnPmAuthAlg | read-only | ESP authentication algorithm |
| STN stnPmPreferenceEspEncrAlg | 1.3.6.1.4.1.3551.2.11.1.3.1.1.5 | StnPmEncrAlg | read-only | ESP encryption algorithm |
| I32 stnPmPreferenceLifeTime | 1.3.6.1.4.1.3551.2.11.1.3.1.1.6 | Integer32 | read-only | Life time in minutes |
| I32 stnPmPreferenceLifeBytes | 1.3.6.1.4.1.3551.2.11.1.3.1.1.7 | Integer32 | read-only | Life value in kilobytes |
| I32 stnPmPreferenceIPsecID | 1.3.6.1.4.1.3551.2.11.1.3.1.1.8 | Integer32 | read-only | ID of corresponding IPSEC record |
| INT stnPmPreferencePFSGroup | 1.3.6.1.4.1.3551.2.11.1.3.1.1.9 | INTEGER | read-only | ESP encryption algorithm |
| STR stnPmPreferenceDescription | 1.3.6.1.4.1.3551.2.11.1.3.1.1.10 | DisplayString | read-only | Description of preference |
| stnPmIPsec | 1.3.6.1.4.1.3551.2.11.1.4 | |||
| stnPmIPsecTable | 1.3.6.1.4.1.3551.2.11.1.4.1 | not-accessible | Entry contains information about a particular IPsec entry. | |
| stnPmIPsecEntry | 1.3.6.1.4.1.3551.2.11.1.4.1.1 | not-accessible | Entry contains information about a particular IPsec entry. | |
| I32 stnPmIPsecIndex | 1.3.6.1.4.1.3551.2.11.1.4.1.1.1 | Integer32 | read-only | IPsec index |
| IP stnPmIPsecPeerIpAddr | 1.3.6.1.4.1.3551.2.11.1.4.1.1.2 | IpAddress | read-only | IP address of peer for tunnel endpoint |
| IP stnPmIPsecLocalIpAddr | 1.3.6.1.4.1.3551.2.11.1.4.1.1.3 | IpAddress | read-only | Local IP address for tunnel endpoint |
| INT stnPmIPsecMode | 1.3.6.1.4.1.3551.2.11.1.4.1.1.4 | INTEGER | read-only | Type of IPsec connection to create |
| INT stnPmIPsecKeyNegType | 1.3.6.1.4.1.3551.2.11.1.4.1.1.5 | INTEGER | read-only | Key negotiation method for IPsec Sa |
| STR stnPmIPsecName | 1.3.6.1.4.1.3551.2.11.1.4.1.1.6 | DisplayString | read-only | Description of IPsec entry |
| I32 stnPmIPsecNumManualSAs | 1.3.6.1.4.1.3551.2.11.1.4.1.1.7 | Integer32 | read-only | Number of manual SAs assigned to this IPsec record |
| I32 stnPmIPsecNumPreferences | 1.3.6.1.4.1.3551.2.11.1.4.1.1.8 | Integer32 | read-only | Number of preferences assigned to this IPsec record |
| T/F stnPmIPsecReplayDetectionEnabled | 1.3.6.1.4.1.3551.2.11.1.4.1.1.9 | TruthValue | read-only | Enable Replay detection. |
| stnPmEncaps | 1.3.6.1.4.1.3551.2.11.1.5 | |||
| stnPmEncapsTable | 1.3.6.1.4.1.3551.2.11.1.5.1 | not-accessible | Entry contains information about a particular Encaps entry. | |
| stnPmEncapsEntry | 1.3.6.1.4.1.3551.2.11.1.5.1.1 | not-accessible | Entry contains information about a particular Encaps entry. | |
| I32 stnPmEncapsIndex | 1.3.6.1.4.1.3551.2.11.1.5.1.1.1 | Integer32 | read-only | Encaps index |
| IP stnPmEncapsPeerIpAddr | 1.3.6.1.4.1.3551.2.11.1.5.1.1.2 | IpAddress | read-only | IP address of peer for tunnel endpoint |
| IP stnPmEncapsLocalIpAddr | 1.3.6.1.4.1.3551.2.11.1.5.1.1.3 | IpAddress | read-only | Local IP address for tunnel endpoint |
| INT stnPmEncapsType | 1.3.6.1.4.1.3551.2.11.1.5.1.1.4 | INTEGER | read-only | Type of Encaps connection to create |
| I32 stnPmEncapsGREKey | 1.3.6.1.4.1.3551.2.11.1.5.1.1.5 | Integer32 | read-only | GRE key |
| STR stnPmEncapsName | 1.3.6.1.4.1.3551.2.11.1.5.1.1.6 | DisplayString | read-only | Description of Encaps entry |
| stnPmManualSa | 1.3.6.1.4.1.3551.2.11.1.6 | |||
| stnPmManualSaTable | 1.3.6.1.4.1.3551.2.11.1.6.1 | not-accessible | Entry contains information about a particular ManualSa entry. | |
| stnPmManualSaEntry | 1.3.6.1.4.1.3551.2.11.1.6.1.1 | not-accessible | Entry contains information about a particular ManualSa entry. | |
| I32 stnPmManualSaIndex | 1.3.6.1.4.1.3551.2.11.1.6.1.1.1 | Integer32 | read-only | ManualSa index |
| IP stnPmManualSaPeerIpAddr | 1.3.6.1.4.1.3551.2.11.1.6.1.1.2 | IpAddress | read-only | IP address of peer for tunnel endpoint |
| STN stnPmManualSaDirection | 1.3.6.1.4.1.3551.2.11.1.6.1.1.3 | StnPmDirection | read-only | Direction of manual SA |
| I32 stnPmManualSaSPI | 1.3.6.1.4.1.3551.2.11.1.6.1.1.4 | Integer32 | read-only | SPI of manual SA |
| STN stnPmManualSaAhAlg | 1.3.6.1.4.1.3551.2.11.1.6.1.1.5 | StnPmAuthAlg | read-only | AH authentication algorithm |
| OCT stnPmManualSaAhKey | 1.3.6.1.4.1.3551.2.11.1.6.1.1.6 | OCTET STRING | read-only | Authentication key for AH protocol |
| STN stnPmManualSaEspAuthAlg | 1.3.6.1.4.1.3551.2.11.1.6.1.1.7 | StnPmAuthAlg | read-only | ESP authentication algorithm |
| OCT stnPmManualSaEspAuthKey | 1.3.6.1.4.1.3551.2.11.1.6.1.1.8 | OCTET STRING | read-only | Authentication key for ESP protocol |
| STN stnPmManualSaEspEncrAlg | 1.3.6.1.4.1.3551.2.11.1.6.1.1.9 | StnPmEncrAlg | read-only | ESP encryption algorithm |
| OCT stnPmManualSaEspEncrKey | 1.3.6.1.4.1.3551.2.11.1.6.1.1.10 | OCTET STRING | read-only | Encryption key for ESP protocol |
| I32 stnPmManualSaIPsecID | 1.3.6.1.4.1.3551.2.11.1.6.1.1.11 | Integer32 | read-only | Index or corresponding IPsec record |
| STR stnPmManualSaDescription | 1.3.6.1.4.1.3551.2.11.1.6.1.1.12 | DisplayString | read-only | Description of manual SA entry |
| stnPmMarker | 1.3.6.1.4.1.3551.2.11.1.7 | |||
| stnPmMarkerTable | 1.3.6.1.4.1.3551.2.11.1.7.1 | not-accessible | Entry contains information about a particular Marker entry. | |
| stnPmMarkerEntry | 1.3.6.1.4.1.3551.2.11.1.7.1.1 | not-accessible | Entry contains information about a particular Marker entry. | |
| I32 stnPmMarkerIndex | 1.3.6.1.4.1.3551.2.11.1.7.1.1.1 | Integer32 | read-only | Marker index |
| STR stnPmMarkerName | 1.3.6.1.4.1.3551.2.11.1.7.1.1.2 | DisplayString | read-only | Description of Marker entry |
| INT stnPmMarkerByteValue | 1.3.6.1.4.1.3551.2.11.1.7.1.1.3 | INTEGER | read-only | Value that the masked TOS byte must match |
| INT stnPmMarkerByteMask | 1.3.6.1.4.1.3551.2.11.1.7.1.1.4 | INTEGER | read-only | Mask applied to TOS byte for match |
| C64 stnPmMarkerMarkedOctets | 1.3.6.1.4.1.3551.2.11.1.7.1.1.5 | Counter64 | read-only | Number of octets marked by this Marker. |
| C64 stnPmMarkerMarkedPkts | 1.3.6.1.4.1.3551.2.11.1.7.1.1.6 | Counter64 | read-only | Number of packets marked by this Marker. |
| stnPmProfile | 1.3.6.1.4.1.3551.2.11.1.8 | |||
| stnPmProfileTable | 1.3.6.1.4.1.3551.2.11.1.8.1 | not-accessible | Entry contains information about a particular Profile entry. | |
| stnPmProfileEntry | 1.3.6.1.4.1.3551.2.11.1.8.1.1 | not-accessible | Entry contains information about a particular Profile entry. | |
| I32 stnPmProfileIndex | 1.3.6.1.4.1.3551.2.11.1.8.1.1.1 | Integer32 | read-only | Profile index |
| T/F stnPmProfileEnabled | 1.3.6.1.4.1.3551.2.11.1.8.1.1.2 | TruthValue | read-only | Flag to indicate if profile is enabled |
| STR stnPmProfileName | 1.3.6.1.4.1.3551.2.11.1.8.1.1.3 | DisplayString | read-only | Description of Profile entry |
| I32 stnPmProfileCommittedRate | 1.3.6.1.4.1.3551.2.11.1.8.1.1.4 | Integer32 | read-only | Rate in kbits per second the user or network is committed to transmit. |
| I32 stnPmProfileCommittedBurst | 1.3.6.1.4.1.3551.2.11.1.8.1.1.5 | Integer32 | read-only | Maximum number of kbytes in a single transmission burst |
| I32 stnPmProfileExcessRate | 1.3.6.1.4.1.3551.2.11.1.8.1.1.6 | Integer32 | read-only | Maximum acceptable rate in kbits per second the user or network is committed to transmit |
| I32 stnPmProfileExcessBurst | 1.3.6.1.4.1.3551.2.11.1.8.1.1.7 | Integer32 | read-only | Maximum number of bytes in a single maximum transmission burst |
| INT stnPmProfileConformAction | 1.3.6.1.4.1.3551.2.11.1.8.1.1.8 | INTEGER | read-only | Type of action to take for conformant frames |
| I32 stnPmProfileConformActionID | 1.3.6.1.4.1.3551.2.11.1.8.1.1.9 | Integer32 | read-only | Configuration ID of conform action record |
| INT stnPmProfileCautionAction | 1.3.6.1.4.1.3551.2.11.1.8.1.1.10 | INTEGER | read-only | Type of action to take for caution frames |
| C64 stnPmProfileConformOctets | 1.3.6.1.4.1.3551.2.11.1.8.1.1.11 | Counter64 | read-only | Number of octets in conformant frames that have arrived. |
| C64 stnPmProfileConformPkts | 1.3.6.1.4.1.3551.2.11.1.8.1.1.12 | Counter64 | read-only | Number of conformant frames that have arrived. |
| I32 stnPmProfileCautionActionID | 1.3.6.1.4.1.3551.2.11.1.8.1.1.13 | Integer32 | read-only | Configuration ID of caution action record |
| INT stnPmProfileExceedAction | 1.3.6.1.4.1.3551.2.11.1.8.1.1.14 | INTEGER | read-only | Type of action to take for exceeding frames |
| C64 stnPmProfileCautionOctets | 1.3.6.1.4.1.3551.2.11.1.8.1.1.15 | Counter64 | read-only | Number of octets in caution frames that have arrived. |
| C64 stnPmProfileCautionPkts | 1.3.6.1.4.1.3551.2.11.1.8.1.1.16 | Counter64 | read-only | Number of caution frames that have arrived. |
| I32 stnPmProfileExceedActionID | 1.3.6.1.4.1.3551.2.11.1.8.1.1.17 | Integer32 | read-only | Configuration ID of exceeding action record |
| C64 stnPmProfileExceedOctets | 1.3.6.1.4.1.3551.2.11.1.8.1.1.18 | Counter64 | read-only | Number of octets in exceeding frames that have arrived. |
| C64 stnPmProfileExceedPkts | 1.3.6.1.4.1.3551.2.11.1.8.1.1.19 | Counter64 | read-only | Number of exceeding frames that have arrived. |
| stnPmQueue | 1.3.6.1.4.1.3551.2.11.1.9 | |||
| stnPmQueueTable | 1.3.6.1.4.1.3551.2.11.1.9.1 | not-accessible | Entry contains information about a particular Queue entry. | |
| stnPmQueueEntry | 1.3.6.1.4.1.3551.2.11.1.9.1.1 | not-accessible | Entry contains information about a particular Queue entry. | |
| I32 stnPmQueueIndex | 1.3.6.1.4.1.3551.2.11.1.9.1.1.1 | Integer32 | read-only | Queue index |
| STR stnPmQueueName | 1.3.6.1.4.1.3551.2.11.1.9.1.1.2 | DisplayString | read-only | Description of Queue entry |
| I32 stnPmQueueThreshold | 1.3.6.1.4.1.3551.2.11.1.9.1.1.3 | Integer32 | read-only | Queue Drop Threshold |
| INT stnPmQueueDropType | 1.3.6.1.4.1.3551.2.11.1.9.1.1.4 | INTEGER | read-only | Type of algorithm used to drop packets when threshold is reached |
| C64 stnPmQueueDropHCOctets | 1.3.6.1.4.1.3551.2.11.1.9.1.1.5 | Counter64 | read-only | Number of octets that have been dropped this queue. |
| C64 stnPmQueueDropHCPkts | 1.3.6.1.4.1.3551.2.11.1.9.1.1.6 | Counter64 | read-only | Number of packets that have been dropped this queue. |
| C32 stnPmQueueQueueLen | 1.3.6.1.4.1.3551.2.11.1.9.1.1.7 | Counter32 | read-only | Number of packets currently in the queue. |
| C32 stnPmQueueMaxQueueLen | 1.3.6.1.4.1.3551.2.11.1.9.1.1.8 | Counter32 | read-only | Maximum number of packets in queue since last statistics reset. |
| stnPmTraps | 1.3.6.1.4.1.3551.2.11.1.10 | |||
| stnPmFirewallTrap | 1.3.6.1.4.1.3551.2.11.1.10.1 | |||
| stnPmFirewallTrapVars | 1.3.6.1.4.1.3551.2.11.1.10.1.1 | |||
| STR stnPmFirewallEventLogMsg | 1.3.6.1.4.1.3551.2.11.1.10.1.1.1 | DisplayString | read-only | Describes SNMP Trap generated by STN Firewall |
| stnPmFirewallNotificationPrefix | 1.3.6.1.4.1.3551.2.11.1.10.1.2 | |||
| stnPmFirewallNotification | 1.3.6.1.4.1.3551.2.11.1.10.1.2.0 | |||
| NTF stnPmFirewallLog | 1.3.6.1.4.1.3551.2.11.1.10.1.2.0.1 | This trap is generated by Policy manager's Firewall subsystem. This SNMP trap is generated in response to firewall event logging. | ||
| stnPmQosTrap | 1.3.6.1.4.1.3551.2.11.1.10.2 | |||
| stnPmQosTrapVars | 1.3.6.1.4.1.3551.2.11.1.10.2.1 | |||
| I32 stnPmQosLatestFlowCB | 1.3.6.1.4.1.3551.2.11.1.10.2.1.1 | Integer32 | read-only | Value of the FlowCB Created |
| I32 stnPmQosLastDroppedPacket | 1.3.6.1.4.1.3551.2.11.1.10.2.1.2 | Integer32 | read-only | Value of a dropped packet |
| stnPmQosNotificationPrefix | 1.3.6.1.4.1.3551.2.11.1.10.2.2 | |||
| stnPmQosNotification | 1.3.6.1.4.1.3551.2.11.1.10.2.2.0 | |||
| NTF stnPmQosFlowCBCreated | 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.1 | This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS creating and installing a flow. | ||
| NTF stnPmQosFlowCBRemoved | 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.2 | This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS removing a flow. | ||
| NTF stnPmQosShapingPacketDiscard | 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.3 | This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to rate shaping. | ||
| NTF stnPmQosThresholdPacketDiscard | 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.4 | This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to exceeding a threshold. | ||
| stnPmFirewall | 1.3.6.1.4.1.3551.2.11.1.11 | |||
| stnPmFirewallTable | 1.3.6.1.4.1.3551.2.11.1.11.1 | not-accessible | Entry contains information about a particular Firewall entry. | |
| stnPmFirewallEntry | 1.3.6.1.4.1.3551.2.11.1.11.1.1 | not-accessible | Entry contains information about a particular Firewall entry. | |
| I32 stnPmFirewallIndex | 1.3.6.1.4.1.3551.2.11.1.11.1.1.1 | Integer32 | read-only | Firewall index |
| STR stnPmFirewallName | 1.3.6.1.4.1.3551.2.11.1.11.1.1.2 | DisplayString | read-only | Description of firewall entry |
| T/F stnPmFirewallAcceptOtherIPOptions | 1.3.6.1.4.1.3551.2.11.1.11.1.1.3 | TruthValue | read-only | Accept packets with other IP options (non source routing). |
| T/F stnPmFirewallAcceptSourceRouting | 1.3.6.1.4.1.3551.2.11.1.11.1.1.4 | TruthValue | read-only | Accept packets with source routing options |
| I32 stnPmFirewallTcpAckLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.5 | Integer32 | read-only | TCP ACK lifetime |
| I32 stnPmFirewallTcpSynLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.6 | Integer32 | read-only | TCP SYN lifetime |
| I32 stnPmFirewallTcpFinLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.7 | Integer32 | read-only | TCP FIN lifetime |
| I32 stnPmFirewallTcpRstLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.8 | Integer32 | read-only | TCP RST lifetime |
| I32 stnPmFirewallTcpInactivityLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.9 | Integer32 | read-only | TCP inactivity lifetime |
| I32 stnPmFirewallUdpInactivityLifeTime | 1.3.6.1.4.1.3551.2.11.1.11.1.1.10 | Integer32 | read-only | UDP inactivity lifetime |
| T/F stnPmFirewallSynAttackDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.11 | TruthValue | read-only | Enable SYN attack detection |
| T/F stnPmFirewallLandAttackDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.12 | TruthValue | read-only | Enable Land attack detection |
| T/F stnPmFirewallPingFloodingDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.13 | TruthValue | read-only | Enable ping flooding attack detection |
| T/F stnPmFirewallPingOfDeathDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.14 | TruthValue | read-only | Enable ping of death attack detection |
| T/F stnPmFirewallPortScanDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.15 | TruthValue | read-only | Enable port scan attack detection |
| T/F stnPmFirewallPingScanDetection | 1.3.6.1.4.1.3551.2.11.1.11.1.1.16 | TruthValue | read-only | Enable ping scan/sweep attack detection |
| I32 stnPmFirewallTcpSynBacklogQueueSize | 1.3.6.1.4.1.3551.2.11.1.11.1.1.17 | Integer32 | read-only | Size of the SYN backlog queue |
| I32 stnPmFirewallPingsPerMinute | 1.3.6.1.4.1.3551.2.11.1.11.1.1.18 | Integer32 | read-only | Maximum number of pings allowed per minute |
| I32 stnPmFirewallMaxPingSize | 1.3.6.1.4.1.3551.2.11.1.11.1.1.19 | Integer32 | read-only | Maximum allowable size for ping |
| U32 stnPmFirewallEnableDynamicPortApps | 1.3.6.1.4.1.3551.2.11.1.11.1.1.20 | Unsigned32 | read-only | Enabled Dynamic port applications expressed as bit-map. |
| I32 stnPmFirewallMaxDynHashTableSize | 1.3.6.1.4.1.3551.2.11.1.11.1.1.21 | Integer32 | read-only | Max dynamic hash table size - must be a power of 2. |
| I32 stnPmFirewallMinLogPeriod | 1.3.6.1.4.1.3551.2.11.1.11.1.1.22 | Integer32 | read-only | Minimim period between event logs |
| stnPmFirewallAction | 1.3.6.1.4.1.3551.2.11.1.12 | |||
| stnPmFirewallActionTable | 1.3.6.1.4.1.3551.2.11.1.12.1 | not-accessible | Entry contains information about a particular Firewall Action entry. | |
| stnPmFirewallActionEntry | 1.3.6.1.4.1.3551.2.11.1.12.1.1 | not-accessible | Entry contains information about a particular Firewall Action entry. | |
| I32 stnPmFirewallActionIndex | 1.3.6.1.4.1.3551.2.11.1.12.1.1.1 | Integer32 | read-only | Firewall Action index |
| STR stnPmFirewallActionName | 1.3.6.1.4.1.3551.2.11.1.12.1.1.2 | DisplayString | read-only | Description of firewall entry |
| INT stnPmFirewallActionTrackingType | 1.3.6.1.4.1.3551.2.11.1.12.1.1.3 | INTEGER | read-only | TCP ACK lifetime |
| T/F stnPmFirewallActionStateful | 1.3.6.1.4.1.3551.2.11.1.12.1.1.4 | TruthValue | read-only | Perform stateful processing |
| I32 stnPmFirewallActionInactivityLifeTime | 1.3.6.1.4.1.3551.2.11.1.12.1.1.5 | Integer32 | read-only | Inactivity lifetime |
| INT stnPmFirewallActionRejectAction | 1.3.6.1.4.1.3551.2.11.1.12.1.1.6 | INTEGER | read-only | Firewall policy reject action. |
| stnPmServiceList | 1.3.6.1.4.1.3551.2.11.1.13 | |||
| stnPmServiceListTable | 1.3.6.1.4.1.3551.2.11.1.13.1 | not-accessible | Entry contains information about a particular Firewall Action entry. | |
| stnPmServiceListEntry | 1.3.6.1.4.1.3551.2.11.1.13.1.1 | not-accessible | Entry contains information about a particular Firewall Action entry. | |
| I32 stnPmServiceListIndex | 1.3.6.1.4.1.3551.2.11.1.13.1.1.1 | Integer32 | read-only | Service List Action index |
| STR stnPmServiceListName | 1.3.6.1.4.1.3551.2.11.1.13.1.1.2 | DisplayString | read-only | Description of service list entry |
| I32 stnPmServiceListConnIdleTimeout | 1.3.6.1.4.1.3551.2.11.1.13.1.1.3 | Integer32 | read-only | Idle timeout |
| I32 stnPmServiceListNumServices | 1.3.6.1.4.1.3551.2.11.1.13.1.1.4 | Integer32 | read-only | Number of services in this serviceList |
| T/F stnPmServiceListEnabled | 1.3.6.1.4.1.3551.2.11.1.13.1.1.5 | TruthValue | read-only | Flag to indicate if service is enabled |
| stnPmSLService | 1.3.6.1.4.1.3551.2.11.1.14 | |||
| stnPmSLServiceTable | 1.3.6.1.4.1.3551.2.11.1.14.1 | not-accessible | A list of PM service entries. | |
| stnPmSLServiceEntry | 1.3.6.1.4.1.3551.2.11.1.14.1.1 | not-accessible | Entry contains information about a particular policy manager service. | |
| I32 stnPmSLIndex | 1.3.6.1.4.1.3551.2.11.1.14.1.1.1 | Integer32 | read-only | Index into service-list table |
| I32 stnPmSLServiceIndex | 1.3.6.1.4.1.3551.2.11.1.14.1.1.2 | Integer32 | read-only | Index into service table |
| STR stnPmSLServiceName | 1.3.6.1.4.1.3551.2.11.1.14.1.1.3 | DisplayString | read-only | Name of service |
| I32 stnPmSLServiceIdleTimeout | 1.3.6.1.4.1.3551.2.11.1.14.1.1.4 | Integer32 | read-only | Idle timeout for service |
| I32 stnPmSLServiceNumPolicies | 1.3.6.1.4.1.3551.2.11.1.14.1.1.5 | Integer32 | read-only | Number of policies in this service |
| T/F stnPmSLServiceEnabled | 1.3.6.1.4.1.3551.2.11.1.14.1.1.6 | TruthValue | read-only | Flag to indicate if service is enabled |
| INT stnPmSLServiceType | 1.3.6.1.4.1.3551.2.11.1.14.1.1.7 | INTEGER | read-only | Type of service |
| I32 stnPmSLServiceFirewallID | 1.3.6.1.4.1.3551.2.11.1.14.1.1.8 | Integer32 | read-only | Instance of service's firewall record |
| stnPmClass | 1.3.6.1.4.1.3551.2.11.1.15 | |||
| stnPmClassTable | 1.3.6.1.4.1.3551.2.11.1.15.1 | not-accessible | This table is a 'flattened' version of a hierarchical class trees that specify the bandwidth allocation for the CBQ interfaces of the system. Each tree is rooted at an interface. A class may either be a leaf, meaning it has no children, or it may be an interior class which has children. As packets are forwarded out an interface, they are compared to the 'flow definition' of each class down the tree until a matching leaf is found or until all classes are traversed. Once a matching class is found, the packet is transmitted or not based on the constraints configured for the class, most importantly the allocated bandwidth as identified by stnPmClassRate. If no matching class is found, the packet is dropped. | |
| stnPmClassEntry | 1.3.6.1.4.1.3551.2.11.1.15.1.1 | not-accessible | Information about a single traffic class. Traffic classes are identified by their associated interface's ifIndex and their name. (Which means class names must be unique for a particular interface.) Finally, the following objects cannot be modified once the row is active: stnPmClassParent, and stnPmClassQueueElasticityFactor. | |
| NUM stnPmIfIndex | 1.3.6.1.4.1.3551.2.11.1.15.1.1.1 | InterfaceIndex | read-only | A sequence number that identifies a particular interface the class has been installed on. |
| I32 stnPmTxclassInstance | 1.3.6.1.4.1.3551.2.11.1.15.1.1.2 | Integer32 | read-only | The instance of the configuration record for the tranmsit class that the interface is using. |
| STR stnPmClassName | 1.3.6.1.4.1.3551.2.11.1.15.1.1.3 | DisplayString | read-only | A user-defined name for the traffic class. This is the unique identifier for the class within the scope of the interface. For example, the class that defines the IP address range for a particular customer might be 'Customer Fred Co.' |
| STR stnPmClassParent | 1.3.6.1.4.1.3551.2.11.1.15.1.1.4 | DisplayString | read-only | Name of class parent |
| STN stnPmClassRate | 1.3.6.1.4.1.3551.2.11.1.15.1.1.5 | StnPmBitRate | read-only | A fraction of the bandwidth of the root interface to be allocated to this traffic class. Note that specifying 0 bits/second effectively filters all traffic that matches this class' flow specification. Also note that the sum of bit rates for all classes defined under the same class must be less than or equal to stnPmClassRate of the parent. |
| I32 stnPmClassPriority | 1.3.6.1.4.1.3551.2.11.1.15.1.1.6 | Integer32 | read-only | The priority for this class. The smaller the value, the higher the priority. Delay-sensitive flows (such as video or audio) should be given higher priority values. |
| I32 stnPmClassMaxIdle | 1.3.6.1.4.1.3551.2.11.1.15.1.1.7 | Integer32 | read-only | An upper bound for the average idle time (see the DESCRIPTION of stnPmClassStatsIdle). Thus, stnPmClassMaxIdle limits the 'credit' given to a class that has recently been under its allocation. |
| I32 stnPmClassMinIdle | 1.3.6.1.4.1.3551.2.11.1.15.1.1.8 | Integer32 | read-only | The negative lower bound of the average idle. Thus, a negative minidle lets the router 'remember' that a class has recently used more than its allocated bandwidth. |
| I32 stnPmClassMaxQueueLen | 1.3.6.1.4.1.3551.2.11.1.15.1.1.9 | Integer32 | read-only | A factor used to influence whether this traffic class gets a proportionally larger or smaller queue size than other classes. Other factors in the queue size include the percent bandwidth allocated to this class and the priority. |
| INT stnPmClassOperStatus | 1.3.6.1.4.1.3551.2.11.1.15.1.1.10 | INTEGER | read-only | The actual operational status of the traffic class. The value 'up(1)' means this traffic class is in use, the value 'down(2)' indicates the traffic class is not in use either due to an internal problem or because it (or an ancestor) is administratively disabled, and the value 'downConflict(3)' indicates the class definition conflicts with those of its siblings. The value autoClassActive(4) means that the class is a dynamically created AutoClass, which may not be modified in any way until it is saved to Non-Volatile configuration memory. After an AutoClass is saved to NVRAM, it's operational status will transistion to up (1). |
| INT stnPmClassBwUse | 1.3.6.1.4.1.3551.2.11.1.15.1.1.11 | INTEGER | read-only | An indication of whether this traffic class has used its allocated bandwidth, has not used its allocated bandwidth or has used more than its allocated bandwidth and is therefore 'atLimit(1)', 'underLimit(2)', or 'overLimit(3)' respectively. |
| T/F stnPmClassUnsatisfied | 1.3.6.1.4.1.3551.2.11.1.15.1.1.12 | TruthValue | read-only | An indication of whether this traffic class is 'unsatisfied'. The value of this object is 'true(1)' if it is underLimit and has a persistent backlog, meaning it has packets waiting in its queue. The value is 'false(1)' otherwise. Note that a class can be considered satisfied if it is underLimit and it just hasn't had anything to transmit. The presence of an unsatisfied class indicates that some other class is overLimit and 'hogging' bandwidth. Persistently unsatisfied classes indicate that tuning some of the parameters (such as stnPmClassMaxIdle or stnPmClassBounded) may be necessary. |
| G32 stnPmClassQueueSize | 1.3.6.1.4.1.3551.2.11.1.15.1.1.13 | Gauge32 | read-only | The size of the queue associated with this traffic class. This is the maximum number of packets that can be in the queue, not the number that are currently queued (see stnPmClassStatsQueuedPkts). |
| STN stnPmClassMaxRate | 1.3.6.1.4.1.3551.2.11.1.15.1.1.14 | StnPmBitRate | read-only | The maximum bandwidth the class may achieve, including bandwidth allocated to this class, and any bandwidth that may be borrowed. A value of zero (0) indicates that this feature is not being used. The stnPmClassMaxRate must be set to a value higher than the stnPmClassRate, but may also exceed the parent class's stnPmClassRate. |
| STR stnPmClassDescription | 1.3.6.1.4.1.3551.2.11.1.15.1.1.15 | DisplayString | read-only | Textual name associated with this class. |
| C32 stnPmClassStatsHighWaterEx | 1.3.6.1.4.1.3551.2.11.1.15.1.1.16 | Counter32 | read-only | The historical maximum number of packets that were queued for this class since the system was last reinitialized. |
| I32 stnPmClassStatsIdle | 1.3.6.1.4.1.3551.2.11.1.15.1.1.17 | Integer32 | read-only | The difference between the desired time and the measured actual time between the most recent packet transmissions for the last two packets sent from this class. When the connection is sending perfectly at its allocated rate, then stnPmClassIdle is zero. When the connection is sending more than its allocated bandwidth, then stnPmClassIdle is negative. |
| G32 stnPmClassStatsQueuedPkts | 1.3.6.1.4.1.3551.2.11.1.15.1.1.18 | Gauge32 | read-only | The current number of packets in the class' queue. |
| C32 stnPmClassStatsOctets | 1.3.6.1.4.1.3551.2.11.1.15.1.1.19 | Counter32 | read-only | The number of bytes transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any octets and therefore this object's value will be 0. These filtered octets will be counted as part of stnPmClassStatsDroppedOctets. |
| C32 stnPmClassStatsPkts | 1.3.6.1.4.1.3551.2.11.1.15.1.1.20 | Counter32 | read-only | The number of packets transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any packets and therefore this object's value will be 0. These filtered packets will be counted as part of stnPmClassStatsDroppedPkts. |
| C32 stnPmClassStatsOverLimits | 1.3.6.1.4.1.3551.2.11.1.15.1.1.21 | Counter32 | read-only | A count of the number of times the class used more than its allocated bandwidth. |
| C32 stnPmClassStatsBorrowAttempts | 1.3.6.1.4.1.3551.2.11.1.15.1.1.22 | Counter32 | read-only | A count of the number of times the class attempted to 'borrow' bandwidth from another class. |
| C32 stnPmClassStatsDroppedOctets | 1.3.6.1.4.1.3551.2.11.1.15.1.1.23 | Counter32 | read-only | A count of the number of octets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth. |
| C32 stnPmClassStatsDroppedPkts | 1.3.6.1.4.1.3551.2.11.1.15.1.1.24 | Counter32 | read-only | A count of the number of packets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth. |
| C32 stnPmClassStatsThrottles | 1.3.6.1.4.1.3551.2.11.1.15.1.1.25 | Counter32 | read-only | A count of the number of times the class was throttled (not allowed to transmit packets) by the link-sharing algorithm. |
| C32 stnPmClassStatsUnsatisfieds | 1.3.6.1.4.1.3551.2.11.1.15.1.1.26 | Counter32 | read-only | A count of the number of times the class was unsatisfied, as indicated by the stnPmClassUnsatisfied object. |
| C32 stnPmClassStatsAggrOctets | 1.3.6.1.4.1.3551.2.11.1.15.1.1.27 | Counter32 | read-only | The aggregate number of bytes transmitted by the children of this traffic class. |
| C32 stnPmClassStatsAggrPkts | 1.3.6.1.4.1.3551.2.11.1.15.1.1.28 | Counter32 | read-only | The aggregate number of packets transmitted by the children of this traffic class. |
| stnPMProxyTunnel | 1.3.6.1.4.1.3551.2.11.1.16 | |||
| stnPmMibConformance | 1.3.6.1.4.1.3551.2.11.2 |
RFC description
Manages network policies, IPSec, firewall rules, and QoS settings on Spring Tide policy controllers.
Start monitoring Spring Tide Networks broadband aggregation equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.