SONUS-SONET-MIB

All MIBs › SONUS-SONET-MIB

Organization: Sonus Networks, Inc.

Last Updated: 2001-02-03

Category: Optical Transport Management, Sonus Networks VoIP Softswitch

Description: Manages Sonus Networks softswitch SONET interface configuration, section/line/path overhead, and alarm status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONUS-SONET-MIB?

SONUS-SONET-MIB is a vendor-specific MIB from Sonus Networks extending SONET/SDH management for their softswitch platform's optical transport interfaces, covering section, line, and path overhead configuration and alarm status. It exposes per-port administrative configuration (shelf/slot/port addressing, naming, mode) and control actions/timeouts for SONET ports. Its monitoring value lies in physical-layer hardware fault detection — SONET alarm status and administrative/operational state of each port — reflecting whether the optical transport hardware is functioning, distinct from CPU/memory-type metrics. It sits within the SONUS-SMI enterprise namespace and shares patterns with standard SONET-MIB (RFC 2558) conventions for overhead/alarm modeling. It is deployed in Sonus softswitch/media gateway platforms that use SONET/SDH transport for trunk connectivity in carrier networks. Network engineers evaluating or troubleshooting this functionality can download the SONUS-SONET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-SONET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks softswitch platform with SONET/SDH transport

Monitoring Examples

An admin would poll sonusSonetPortAdmnTable/sonusSonetPortAdmnEntry, indexed by sonusSonetPortAdmnShelfIndex, sonusSonetPortAdmnSlotIndex, and sonusSonetPortAdmnPortIndex, checking sonusSonetPortAdmnState and sonusSonetPortAdmnMode to confirm a given SONET port (identified by sonusSonetPortAdmnName) is administratively up and correctly configured. sonusSonetPortAdmnRowStatus would reveal whether a port entry is active, and repeated sonusSonetPortAdmnAction/sonusSonetPortAdmnTimeout activity might indicate a port cycling through resets, a sign of an unstable optical link.

What Can Be Monitored

SONET port administrative/operational state
port mode and action status
port naming and addressing
row status of port configuration
section/line/path alarm conditions

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From PerfHist-TC-MIB

PerfCurrentCount
PerfIntervalCount

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From SONUS-COMMON-MIB

sonusEventClass	OBJECT-TYPE
sonusEventDescription	OBJECT-TYPE
sonusEventLevel	OBJECT-TYPE
sonusPortIndex	OBJECT-TYPE
sonusShelfIndex	OBJECT-TYPE
sonusSlotIndex	OBJECT-TYPE

From SONUS-SMI

sonusCircuitMIBs

OBJECT-IDENTITY

From SONUS-TC

SonusAdminAction
SonusAdminState
SonusName
SonusServiceState
SonusShelfIndex
SonusSlotIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonusSonetMIB	1.3.6.1.4.1.2879.2.4.3			The MIB Module for Sonus SONET/SDH extensions.
sonusSonetObjects	1.3.6.1.4.1.2879.2.4.3.1
sonusSonetPortAdmn	1.3.6.1.4.1.2879.2.4.3.1.1
sonusSonetPortAdmnTable	1.3.6.1.4.1.2879.2.4.3.1.1.1		not-accessible	The Sonus SONET Port Admn Table.
sonusSonetPortAdmnEntry	1.3.6.1.4.1.2879.2.4.3.1.1.1.1		not-accessible	An entry in the Sonus SONET Port Admn table.
I32 sonusSonetPortAdmnIfIndex	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
SON sonusSonetPortAdmnShelfIndex	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.2	SonusShelfIndex	read-write	Shelf index for this table.
SON sonusSonetPortAdmnSlotIndex	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.3	SonusSlotIndex	read-write	Slot index for this table.
I32 sonusSonetPortAdmnPortIndex	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.4	Integer32	read-write	OC3 port index for this table.
ROW sonusSonetPortAdmnRowStatus	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.5	RowStatus	read-write	This object is used to create, delete, or modify a row in this table.
SON sonusSonetPortAdmnName	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.6	SonusName	read-write	Name of this STS3
SON sonusSonetPortAdmnState	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.7	SonusAdminState	read-write	State of STS3, Enabled/Disabled
SON sonusSonetPortAdmnMode	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.8	SonusServiceState	read-write	SONET port entries are created with a mode of outOfService. A SONET port which is outOfService has had all active calls terminated. A SOENT port must be outOfService in order to change its state to disabled.
SON sonusSonetPortAdmnAction	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.9	SonusAdminAction	read-write	The type of action to perform when a SONET port is taken out of service. The SONET port can be dried up, or it can be forced out of service.
I32 sonusSonetPortAdmnTimeout	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.10	Integer32	read-write	The Dryup Timeout specifies the maximum amount of time to wait for all active calls to terminate on a SONET port before the port should be taken out-of-service.
INT sonusSonetPortAdmnStatAction	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.11	INTEGER	read-write	Initialize Performance Monitoring Statistics. A PM initialization action initiates one request for the action. Requests to initialize more than one group of statistics can be accomplished by OR-ing the appropriate bits (e.g., to initialize all 15 minute PM statistics, set bits 1 and 2). Reading this variable always returns zero.
INT sonusSonetPortAdmnLaserState	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.12	INTEGER	read-write	Controls whether the fiber-optic laser is On or Off.
I32 sonusSonetPortAdmn24hTimeElapsed	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.13	Integer32	read-only	The number of seconds, including partial seconds, that have elapsed since the beginning of the current 24 hour measurement period.
INT sonusSonetPortAdmnOperStatus	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.14	INTEGER	read-only	The actual status of the Sonet interface. Interface is Up if it is administratively in service and there are no line failures or hardware failures. Interface is Down if it is administratively in service and there are line failures or hardware failures, or if it is administratively out of service. Interface is DryingUp if it is administratively out of service and is drying up (no new calls, still carrying in-progress calls). OTHER VALUES ARE NO LONGER SUPPORTED
SON sonusSonetPortAdmnDs3ModeOverride	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.15	SonusAdminState	read-write	This flag controls whether the mode and state of the Paths carried in an OC3 are modified when the mode and state of the OC3 is modified. If this flag is set to Enabled, the Path state and mode are not changed when the OC3 mode and state are changed.
SON sonusSonetPortAdmnStsXmtScramble	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.16	SonusAdminState	read-write	Controls whether the transmitted STS-N data stream is scrambled. If this flag is set to Enabled, the data is scrambled.
SON sonusSonetPortAdmnStsRcvDescramble	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.17	SonusAdminState	read-write	Controls whether the received STS-N data stream is descrambled. If this flag is set to Enabled, the data is descrambled.
SON sonusSonetPortAdmnAtmXmtScramble	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.18	SonusAdminState	read-write	Controls whether the transmitted ATM payload data is scrambled. If this flag is set to Enabled, the data is scrambled. This object only pertains to interfaces carrying ATM.
SON sonusSonetPortAdmnAtmRcvDescramble	1.3.6.1.4.1.2879.2.4.3.1.1.1.1.19	SonusAdminState	read-write	Controls whether the received ATM payload data is descrambled. If this flag is set to Enabled, the data is descrambled. This object only pertains to interfaces carrying ATM.
sonusSonetSection	1.3.6.1.4.1.2879.2.4.3.1.2
sonusSonetSectionThresholdTable	1.3.6.1.4.1.2879.2.4.3.1.2.1		not-accessible	The Sonus SONET Section Threshold Table. This table adds objects to set the Performance Monitoring thresholds for generating a Threshold Crossing Alert.
sonusSonetSectionThresholdEntry	1.3.6.1.4.1.2879.2.4.3.1.2.1.1		not-accessible	An entry in the Sonus SONET Section Threshold table.
I32 sonusSonetSectionThresholdIfIndex	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetSectionThreshold15mCVs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.2	Integer32	read-write	Threshold for 15 minute interval Section layer Coding Violations.
I32 sonusSonetSectionThreshold15mESs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.3	Integer32	read-write	Threshold for 15 minute interval Section layer Errored Seconds.
I32 sonusSonetSectionThreshold15mSESs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.4	Integer32	read-write	Threshold for 15 minute interval Section layer Severely Errored Seconds.
I32 sonusSonetSectionThreshold15mSEFSs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.5	Integer32	read-write	Threshold for 15 minute interval Section layer Severely Errored Frame Seconds.
I32 sonusSonetSectionThreshold24hCVs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.6	Integer32	read-write	Threshold for 24 hour interval Section layer Coding Violations.
I32 sonusSonetSectionThreshold24hESs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.7	Integer32	read-write	Threshold for 24 hour interval Section layer Errored Seconds.
I32 sonusSonetSectionThreshold24hSESs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.8	Integer32	read-write	Threshold for 24 hour interval Section layer Severely Errored Seconds.
I32 sonusSonetSectionThreshold24hSEFSs	1.3.6.1.4.1.2879.2.4.3.1.2.1.1.9	Integer32	read-write	Threshold for 24 hour interval Section layer Severely Errored Frame Seconds.
sonusSonetSectionCurrentTable	1.3.6.1.4.1.2879.2.4.3.1.2.2		not-accessible	The Sonus SONET Section Current table.
sonusSonetSectionCurrentEntry	1.3.6.1.4.1.2879.2.4.3.1.2.2.1		not-accessible	An entry in the Sonus SONET Section Current table.
I32 sonusSonetSectionCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetSectionCurrentStatus	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.2	Integer32	read-only	This variable indicates the status of the interface. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetSectionNoDefect 2 sonetSectionLOS 4 sonetSectionLOF
PER sonusSonetSectionCurrentESs	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.3	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 24 hour interval.
PER sonusSonetSectionCurrentSESs	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.4	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 24 hour interval.
PER sonusSonetSectionCurrentSEFSs	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.5	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 24 hour interval.
PER sonusSonetSectionCurrentCVs	1.3.6.1.4.1.2879.2.4.3.1.2.2.1.6	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 24 hour interval.
sonusSonetSectionIntervalTable	1.3.6.1.4.1.2879.2.4.3.1.2.3		not-accessible	The Sonus SONET Section Interval table.
sonusSonetSectionIntervalEntry	1.3.6.1.4.1.2879.2.4.3.1.2.3.1		not-accessible	An entry in the Sonus SONET Section Interval table.
I32 sonusSonetSectionIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetSectionIntervalNumber	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.2	Integer32	not-accessible	The number 1 identifies the most recently completed 24 hour interval. In the future if more 24 hour intervals are supported, the interval identified by N is the interval immediately preceding the one identified by N-1.
PER sonusSonetSectionIntervalESs	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.3	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the previous 24 hour interval.
PER sonusSonetSectionIntervalSESs	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.4	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the previous 24 hour interval.
PER sonusSonetSectionIntervalSEFSs	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.5	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the previous 24 hour interval.
PER sonusSonetSectionIntervalCVs	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.6	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the previous 24 hour interval.
T/F sonusSonetSectionIntervalValidData	1.3.6.1.4.1.2879.2.4.3.1.2.3.1.7	TruthValue	read-only	This variable indicates if the data for this interval is valid.
sonusSonetLine	1.3.6.1.4.1.2879.2.4.3.1.3
sonusSonetLineThresholdTable	1.3.6.1.4.1.2879.2.4.3.1.3.1		not-accessible	The Sonus SONET Line Threshold Table. This table adds objects to set the Performance Monitoring thresholds for generating a Threshold Crossing Alert.
sonusSonetLineThresholdEntry	1.3.6.1.4.1.2879.2.4.3.1.3.1.1		not-accessible	An entry in the Sonus SONET Line Threshold table.
I32 sonusSonetLineThresholdIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetLineThreshold15mCVs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.2	Integer32	read-write	Threshold for 15 minute interval Line layer Coding Violations.
I32 sonusSonetLineThreshold15mESs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.3	Integer32	read-write	Threshold for 15 minute interval Line layer Errored Seconds.
I32 sonusSonetLineThreshold15mSESs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.4	Integer32	read-write	Threshold for 15 minute interval Line layer Severely Errored Seconds.
I32 sonusSonetLineThreshold15mUASs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.5	Integer32	read-write	Threshold for 15 minute interval Line layer Unavailable Seconds.
I32 sonusSonetLineThreshold24hCVs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.6	Integer32	read-write	Threshold for 24 hour interval Line layer Coding Violations.
I32 sonusSonetLineThreshold24hESs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.7	Integer32	read-write	Threshold for 24 hour interval Line layer Errored Seconds.
I32 sonusSonetLineThreshold24hSESs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.8	Integer32	read-write	Threshold for 24 hour interval Line layer Severely Errored Seconds.
I32 sonusSonetLineThreshold24hUASs	1.3.6.1.4.1.2879.2.4.3.1.3.1.1.9	Integer32	read-write	Threshold for 24 hour interval Line layer Unavailable Seconds.
sonusSonetLineCurrentTable	1.3.6.1.4.1.2879.2.4.3.1.3.2		not-accessible	The Sonus SONET Line Current table.
sonusSonetLineCurrentEntry	1.3.6.1.4.1.2879.2.4.3.1.3.2.1		not-accessible	An entry in the Sonus SONET Line Current table.
I32 sonusSonetLineCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetLineCurrentStatus	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.2	Integer32	read-only	This variable indicates the status of the interface. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetSectionNoDefect 2 sonetLineAIS 4 sonetLineRDI
PER sonusSonetLineCurrentESs	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.3	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetLineCurrentSESs	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.4	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetLineCurrentUASs	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.5	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetLineCurrentCVs	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.6	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetLineCurrentFCs	1.3.6.1.4.1.2879.2.4.3.1.3.2.1.7	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the current 24 hour interval.
sonusSonetLineIntervalTable	1.3.6.1.4.1.2879.2.4.3.1.3.3		not-accessible	The Sonus SONET Line Interval table.
sonusSonetLineIntervalEntry	1.3.6.1.4.1.2879.2.4.3.1.3.3.1		not-accessible	An entry in the Sonus SONET Line Interval table.
I32 sonusSonetLineIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetLineIntervalNumber	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.2	Integer32	not-accessible	The number 1 identifies the most recently completed 24 hour interval. In the future if more 24 hour intervals are supported, the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM sonusSonetLineIntervalESs	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.3	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the previous 24 hour interval.
NUM sonusSonetLineIntervalSESs	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.4	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the previous 24 hour interval.
NUM sonusSonetLineIntervalUASs	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.5	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the previous 24 hour interval.
NUM sonusSonetLineIntervalCVs	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.6	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the previous 24 hour interval.
NUM sonusSonetLineIntervalFCs	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.7	PerfIntervalCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the previous 24 hour interval.
T/F sonusSonetLineIntervalValidData	1.3.6.1.4.1.2879.2.4.3.1.3.3.1.8	TruthValue	read-only	This variable indicates if the data for this interval is valid.
sonusSonetFarEndLineCurrentTable	1.3.6.1.4.1.2879.2.4.3.1.3.4		not-accessible	The Sonus SONET Far End Line Current table.
sonusSonetFarEndLineCurrentEntry	1.3.6.1.4.1.2879.2.4.3.1.3.4.1		not-accessible	An entry in the Sonus SONET Far End Line Current table.
I32 sonusSonetFarEndLineCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
PER sonusSonetFarEndLineCurrentESs	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.2	PerfCurrentCount	read-only	The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetFarEndLineCurrentSESs	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetFarEndLineCurrentUASs	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetFarEndLineCurrentCVs	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.5	PerfCurrentCount	read-only	The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Line in the current 24 hour interval.
PER sonusSonetFarEndLineCurrentFCs	1.3.6.1.4.1.2879.2.4.3.1.3.4.1.6	PerfCurrentCount	read-only	The counter associated with the number of Far End Failures encountered by a SONET/SDH Line in the current 24 hour interval.
sonusSonetFarEndLineIntervalTable	1.3.6.1.4.1.2879.2.4.3.1.3.5		not-accessible	The Sonus SONET Far End Line Interval table.
sonusSonetFarEndLineIntervalEntry	1.3.6.1.4.1.2879.2.4.3.1.3.5.1		not-accessible	An entry in the Sonus SONET Far End Line Interval table.
I32 sonusSonetFarEndLineIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetFarEndLineIntervalNumber	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.2	Integer32	not-accessible	The number 1 identifies the most recently completed 24 hour interval. In the future if more 24 hour intervals are supported, the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM sonusSonetFarEndLineIntervalESs	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.3	PerfIntervalCount	read-only	The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
NUM sonusSonetFarEndLineIntervalSESs	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.4	PerfIntervalCount	read-only	The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
NUM sonusSonetFarEndLineIntervalUASs	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.5	PerfIntervalCount	read-only	The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Line in the current 24 hour interval.
NUM sonusSonetFarEndLineIntervalCVs	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.6	PerfIntervalCount	read-only	The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Line in the current 24 hour interval.
NUM sonusSonetFarEndLineIntervalFCs	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.7	PerfIntervalCount	read-only	The counter associated with the number of Far End Failures encountered by a SONET/SDH Line in the current 24 hour interval.
T/F sonusSonetFarEndLineIntervalValidData	1.3.6.1.4.1.2879.2.4.3.1.3.5.1.8	TruthValue	read-only	This variable indicates if the data for this interval is valid.
sonusSonetLineFailureCurrentTable	1.3.6.1.4.1.2879.2.4.3.1.3.6		not-accessible	The Sonus SONET Line Failure Current table.
sonusSonetLineFailureCurrentEntry	1.3.6.1.4.1.2879.2.4.3.1.3.6.1		not-accessible	An entry in the Sonus SONET Line Failure Current table.
I32 sonusSonetLineFailureCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.6.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
PER sonusSonetLineFailureCurrentFCs	1.3.6.1.4.1.2879.2.4.3.1.3.6.1.2	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the current 15 minute interval.
sonusSonetLineFailureIntervalTable	1.3.6.1.4.1.2879.2.4.3.1.3.7		not-accessible	The Sonus SONET Line Failure Interval table.
sonusSonetLineFailureIntervalEntry	1.3.6.1.4.1.2879.2.4.3.1.3.7.1		not-accessible	An entry in the Sonus SONET Line Failure Interval table.
I32 sonusSonetLineFailureIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.7.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetLineFailureIntervalNumber	1.3.6.1.4.1.2879.2.4.3.1.3.7.1.2	Integer32	not-accessible	A number between 1 and 32, which identifies the interval for which the set of statistics is available. The number 1 identifies the most recently completed interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
PER sonusSonetLineFailureIntervalFCs	1.3.6.1.4.1.2879.2.4.3.1.3.7.1.3	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the current 15 minute interval.
sonusSonetFarEndLineFailureCurrentTable	1.3.6.1.4.1.2879.2.4.3.1.3.8		not-accessible	The Sonus SONET Far End Line Failure Current table.
sonusSonetFarEndLineFailureCurrentEntry	1.3.6.1.4.1.2879.2.4.3.1.3.8.1		not-accessible	An entry in the Sonus SONET Far End Line Failure Current table.
I32 sonusSonetFarEndLineFailureCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.8.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
PER sonusSonetFarEndLineFailureCurrentFCs	1.3.6.1.4.1.2879.2.4.3.1.3.8.1.2	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the current 15 minute interval.
sonusSonetFarEndLineFailureIntervalTable	1.3.6.1.4.1.2879.2.4.3.1.3.9		not-accessible	The Sonus SONET Far End Line Failure Interval table.
sonusSonetFarEndLineFailureIntervalEntry	1.3.6.1.4.1.2879.2.4.3.1.3.9.1		not-accessible	An entry in the Sonus SONET Far End Line Failure Interval table.
I32 sonusSonetFarEndLineFailureIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.1.3.9.1.1	Integer32	not-accessible	The ifIndex assigned to this port when it was created. This will not change until the port is deleted.
I32 sonusSonetFarEndLineFailureIntervalNumber	1.3.6.1.4.1.2879.2.4.3.1.3.9.1.2	Integer32	not-accessible	A number between 1 and 32, which identifies the interval for which the set of statistics is available. The number 1 identifies the most recently completed interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
PER sonusSonetFarEndLineFailureIntervalFCs	1.3.6.1.4.1.2879.2.4.3.1.3.9.1.3	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Line in the current 15 minute interval.
sonusSonetLayer	1.3.6.1.4.1.2879.2.4.3.1.4
sonusSonetLayerTable	1.3.6.1.4.1.2879.2.4.3.1.4.1		not-accessible	The SONET layer table. This table maps SONET Interface ifIndex to a shelf, slot, and port.
sonusSonetLayerEntry	1.3.6.1.4.1.2879.2.4.3.1.4.1.1		not-accessible	An entry in the SONET layer table. This entry maps the ifIndex of the SONET Interface to a shelf, slot and port. A row is added to this table when a SONET port is created.
SON sonusSonetLayerShelfIndex	1.3.6.1.4.1.2879.2.4.3.1.4.1.1.1	SonusShelfIndex	not-accessible	Shelf index for this table.
SON sonusSonetLayerSlotIndex	1.3.6.1.4.1.2879.2.4.3.1.4.1.1.2	SonusSlotIndex	not-accessible	Slot index for this table.
I32 sonusSonetLayerPortIndex	1.3.6.1.4.1.2879.2.4.3.1.4.1.1.3	Integer32	not-accessible	Port index for this table.
I32 sonusSonetLayerIfIndex	1.3.6.1.4.1.2879.2.4.3.1.4.1.1.4	Integer32	read-only	The ifIndex assigned to this shelf, slot, and port when the SONET Interface was created.
ROW sonusSonetLayerRowStatus	1.3.6.1.4.1.2879.2.4.3.1.4.1.1.5	RowStatus	read-create	This object is used to create, delete, or modify a row in this table.
sonusSonetObjectsPath	1.3.6.1.4.1.2879.2.4.3.2
sonusSonetPathAdmn	1.3.6.1.4.1.2879.2.4.3.2.1
sonusSonetPathAdmnTable	1.3.6.1.4.1.2879.2.4.3.2.1.1		not-accessible	The Sonus SONET Path Admn Table.
sonusSonetPathAdmnEntry	1.3.6.1.4.1.2879.2.4.3.2.1.1.1		not-accessible	An entry in the Sonus SONET Path Admn table.
I32 sonusSonetPathAdmnIfIndex	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
SON sonusSonetPathAdmnShelfIndex	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.2	SonusShelfIndex	read-write	Shelf index for this table.
SON sonusSonetPathAdmnSlotIndex	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.3	SonusSlotIndex	read-write	Slot index for this table.
I32 sonusSonetPathAdmnPortIndex	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.4	Integer32	read-write	OC3 port index for this table.
I32 sonusSonetPathAdmnPathIndex	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.5	Integer32	read-only	STS1 path index for this table.
ROW sonusSonetPathAdmnRowStatus	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.6	RowStatus	read-write	This object is used to create, delete, or modify a row in this table.
SON sonusSonetPathAdmnState	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.7	SonusAdminState	read-write	State of STS1, Enabled/Disabled
SON sonusSonetPathAdmnMode	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.8	SonusServiceState	read-write	STS1 in-service/out-of-service.
SON sonusSonetPathAdmnAction	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.9	SonusAdminAction	read-write	The type of action to perform when a SONET path is taken out of service. The SONET path can be dried up, or it can be forced out of service.
I32 sonusSonetPathAdmnTimeout	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.10	Integer32	read-write	The Dryup Timeout specifies the maximum amount of time to wait for all active calls to terminate on a SONET path before the path should be taken out-of-service.
INT sonusSonetPathAdmnStatAction	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.11	INTEGER	read-write	Initialize Performance Monitoring Statistics. A PM initialization action initiates one request for the action. Requests to initialize more than one group of statistics can be accomplished by OR-ing the appropriate bits (e.g., to initialize all 15 minute PM statistics, set bits 1 and 2). Reading this variable always returns zero.
INT sonusSonetPathAdmnRDIMode	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.12	INTEGER	read-write	The desired type of SONET port Path Remote Defect Indication to use. (1) normal - Use one-bit RDI-P signalling using bit 5 of G1. (2) enhanced - Use three-bit RDI-P (ERDI-P) using bits 5-7 of G1.
SON sonusSonetPathAdmnTraceState	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.13	SonusAdminState	read-write	The desired state of SONET Path Trace. (1) enabled - Enables the generation of SONET Path Trace Messages in the J1 bytes of the STS Path overhead, and enables the reception and checking of received Path Trace Messages with the Expected Path Trace Message. (2) disabled - Transmits all zero's in the J1 bytes of the STS Path overhead, and disables the reception and checking of received Path Trace Messages with the Expected Path Trace Message.
STR sonusSonetPathAdmnTraceExpMsg	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.14	DisplayString	read-write	The expected path trace string to be received on the SONET port in the J1 bytes of the STS Path overhead.
STR sonusSonetPathAdmnTraceXmtMsg	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.15	DisplayString	read-write	The path trace string to be transmitted on the SONET port in the J1 bytes of the STS Path overhead.
STR sonusSonetPathAdmnTraceRcvMsg	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.16	DisplayString	read-only	The path trace string received on the SONET port in the J1 bytes of the STS Path overhead.
INT sonusSonetPathAdmnOperStatus	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.17	INTEGER	read-only	The actual status of the Sonet path. Path is Up if it is administratively in service and there are no line failures or hardware failures. Path is Down if it is administratively in service and there are line failures or hardware failures, or if it is administratively out of service. Path is DryingUp if it is administratively out of service and is drying up (no new calls, still carrying in-progress calls) THE OTHER VALUES ARE NO LONGER SUPPORTED.
SON sonusSonetPathAdmnDs3ModeOverride	1.3.6.1.4.1.2879.2.4.3.2.1.1.1.18	SonusAdminState	read-write	This flag controls whether the mode and state of the DS3 carried in the Path are modified when the mode and state of the Path is modified. If this flag is set to Enabled, the DS3 state and mode are not changed when the Path mode and state are changed.
sonusSonetPath	1.3.6.1.4.1.2879.2.4.3.2.2
sonusSonetPathThresholdTable	1.3.6.1.4.1.2879.2.4.3.2.2.1		not-accessible	The Sonus SONET Path Threshold Table. This table adds objects to set the Performance Monitoring thresholds for generating a Threshold Crossing Alert.
sonusSonetPathThresholdEntry	1.3.6.1.4.1.2879.2.4.3.2.2.1.1		not-accessible	An entry in the Sonus SONET Path Threshold table.
I32 sonusSonetPathThresholdIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetPathThresholdPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.2	Integer32	read-only	STS1 path index for this table.
I32 sonusSonetPathThreshold15mCVs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.3	Integer32	read-write	Threshold for 15 minute interval Path layer Coding Violations.
I32 sonusSonetPathThreshold15mESs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.4	Integer32	read-write	Threshold for 15 minute interval Path layer Errored Seconds.
I32 sonusSonetPathThreshold15mSESs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.5	Integer32	read-write	Threshold for 15 minute interval Path layer Severely Errored Seconds.
I32 sonusSonetPathThreshold15mUASs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.6	Integer32	read-write	Threshold for 15 minute interval Path layer Unavailable Seconds.
I32 sonusSonetPathThreshold24hCVs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.7	Integer32	read-write	Threshold for 24 hour interval Path layer Coding Violations.
I32 sonusSonetPathThreshold24hESs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.8	Integer32	read-write	Threshold for 24 hour interval Path layer Errored Seconds.
I32 sonusSonetPathThreshold24hSESs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.9	Integer32	read-write	Threshold for 24 hour interval Path layer Severely Errored Seconds.
I32 sonusSonetPathThreshold24hUASs	1.3.6.1.4.1.2879.2.4.3.2.2.1.1.10	Integer32	read-write	Threshold for 24 hour interval Path layer Unavailable Seconds.
sonusSonetPathCurrentTable	1.3.6.1.4.1.2879.2.4.3.2.2.2		not-accessible	The Sonus SONET Path Current table.
sonusSonetPathCurrentEntry	1.3.6.1.4.1.2879.2.4.3.2.2.2.1		not-accessible	An entry in the Sonus SONET Path Current table.
I32 sonusSonetPathCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetPathCurrentPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.2	Integer32	read-only	STS1 path index for this table.
INT sonusSonetPathCurrentWidth	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.3	INTEGER	read-only	A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, and 16.
I32 sonusSonetPathCurrentStatus	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.4	Integer32	read-only	This variable indicates the status of the interface. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequiped 32 sonetPathSignalLabelMismatch
PER sonusSonetPathCurrentESs	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.5	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetPathCurrentSESs	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.6	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetPathCurrentUASs	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.7	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetPathCurrentCVs	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.8	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetPathCurrentFCs	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.9	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the current 24 hour interval.
INT sonusSonetPathCurrentTraceStatus	1.3.6.1.4.1.2879.2.4.3.2.2.2.1.10	INTEGER	read-only	The status of the Trace Mismatch Failure.
sonusSonetPathIntervalTable	1.3.6.1.4.1.2879.2.4.3.2.2.3		not-accessible	The Sonus SONET Path Interval table.
sonusSonetPathIntervalEntry	1.3.6.1.4.1.2879.2.4.3.2.2.3.1		not-accessible	An entry in the Sonus SONET Path Interval table.
I32 sonusSonetPathIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetPathIntervalPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.2	Integer32	read-only	STS1 path index for this table.
I32 sonusSonetPathIntervalNumber	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.3	Integer32	not-accessible	The number 1 identifies the most recently completed 24 hour interval. In the future if more 24 hour intervals are supported, the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM sonusSonetPathIntervalESs	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.4	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the previous 24 hour interval.
NUM sonusSonetPathIntervalSESs	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.5	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the previous 24 hour interval.
NUM sonusSonetPathIntervalUASs	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.6	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in the previous 24 hour interval.
NUM sonusSonetPathIntervalCVs	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.7	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the previous 24 hour interval.
NUM sonusSonetPathIntervalFCs	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.8	PerfIntervalCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the previous 24 hour interval.
T/F sonusSonetPathIntervalValidData	1.3.6.1.4.1.2879.2.4.3.2.2.3.1.9	TruthValue	read-only	This variable indicates if the data for this interval is valid.
sonusSonetFarEndPathCurrentTable	1.3.6.1.4.1.2879.2.4.3.2.2.4		not-accessible	The Sonus SONET Far End Path Current table.
sonusSonetFarEndPathCurrentEntry	1.3.6.1.4.1.2879.2.4.3.2.2.4.1		not-accessible	An entry in the Sonus SONET Far End Path Current table.
I32 sonusSonetFarEndPathCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetFarEndPathCurrentPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.2	Integer32	read-only	STS1 path index for this table.
PER sonusSonetFarEndPathCurrentESs	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetFarEndPathCurrentSESs	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetFarEndPathCurrentUASs	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.5	PerfCurrentCount	read-only	The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetFarEndPathCurrentCVs	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.6	PerfCurrentCount	read-only	The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in the current 24 hour interval.
PER sonusSonetFarEndPathCurrentFCs	1.3.6.1.4.1.2879.2.4.3.2.2.4.1.7	PerfCurrentCount	read-only	The counter associated with the number of Far End Failures encountered by a SONET/SDH Path in the current 24 hour interval.
sonusSonetFarEndPathIntervalTable	1.3.6.1.4.1.2879.2.4.3.2.2.5		not-accessible	The Sonus SONET Far End Path Interval table.
sonusSonetFarEndPathIntervalEntry	1.3.6.1.4.1.2879.2.4.3.2.2.5.1		not-accessible	An entry in the Sonus SONET Far End Path Interval table.
I32 sonusSonetFarEndPathIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetFarEndPathIntervalPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.2	Integer32	read-only	STS1 path index for this table.
I32 sonusSonetFarEndPathIntervalNumber	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.3	Integer32	not-accessible	The number 1 identifies the most recently completed 24 hour interval. In the future if more 24 hour intervals are supported, the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM sonusSonetFarEndPathIntervalESs	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.4	PerfIntervalCount	read-only	The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
NUM sonusSonetFarEndPathIntervalSESs	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.5	PerfIntervalCount	read-only	The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
NUM sonusSonetFarEndPathIntervalUASs	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.6	PerfIntervalCount	read-only	The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in the current 24 hour interval.
NUM sonusSonetFarEndPathIntervalCVs	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.7	PerfIntervalCount	read-only	The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in the current 24 hour interval.
NUM sonusSonetFarEndPathIntervalFCs	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.8	PerfIntervalCount	read-only	The counter associated with the number of Far End Failures encountered by a SONET/SDH Path in the current 24 hour interval.
T/F sonusSonetFarEndPathIntervalValidData	1.3.6.1.4.1.2879.2.4.3.2.2.5.1.9	TruthValue	read-only	This variable indicates if the data for this interval is valid.
sonusSonetPathFailureCurrentTable	1.3.6.1.4.1.2879.2.4.3.2.2.6		not-accessible	The Sonus SONET Path Failure Current table.
sonusSonetPathFailureCurrentEntry	1.3.6.1.4.1.2879.2.4.3.2.2.6.1		not-accessible	An entry in the Sonus SONET Path Failure Current table.
I32 sonusSonetPathFailureCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.6.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetPathFailureCurrentPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.6.1.2	Integer32	read-only	STS1 path index for this table.
PER sonusSonetPathFailureCurrentFCs	1.3.6.1.4.1.2879.2.4.3.2.2.6.1.3	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the current 15 minute interval.
INT sonusSonetPathFailureCurrentTraceStatus	1.3.6.1.4.1.2879.2.4.3.2.2.6.1.4	INTEGER	read-only	The status of the Trace Mismatch Failure.
sonusSonetPathFailureIntervalTable	1.3.6.1.4.1.2879.2.4.3.2.2.7		not-accessible	The Sonus SONET Path Failure Interval table.
sonusSonetPathFailureIntervalEntry	1.3.6.1.4.1.2879.2.4.3.2.2.7.1		not-accessible	An entry in the Sonus SONET Path Failure Interval table.
I32 sonusSonetPathFailureIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.7.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetPathFailureIntervalPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.7.1.2	Integer32	read-only	STS1 path index for this table.
I32 sonusSonetPathFailureIntervalNumber	1.3.6.1.4.1.2879.2.4.3.2.2.7.1.3	Integer32	not-accessible	A number between 1 and 32, which identifies the interval for which the set of statistics is available. The number 1 identifies the most recently completed interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
PER sonusSonetPathFailureIntervalFCs	1.3.6.1.4.1.2879.2.4.3.2.2.7.1.4	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the current 15 minute interval.
sonusSonetFarEndPathFailureCurrentTable	1.3.6.1.4.1.2879.2.4.3.2.2.8		not-accessible	The Sonus SONET Far End Path Failure Current table.
sonusSonetFarEndPathFailureCurrentEntry	1.3.6.1.4.1.2879.2.4.3.2.2.8.1		not-accessible	An entry in the Sonus SONET Far End Path Failure Current table.
I32 sonusSonetFarEndPathFailureCurrentIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.8.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetFarEndPathFailureCurrentPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.8.1.2	Integer32	read-only	STS1 path index for this table.
PER sonusSonetFarEndPathFailureCurrentFCs	1.3.6.1.4.1.2879.2.4.3.2.2.8.1.3	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the current 15 minute interval.
sonusSonetFarEndPathFailureIntervalTable	1.3.6.1.4.1.2879.2.4.3.2.2.9		not-accessible	The Sonus SONET Far End Path Failure Interval table.
sonusSonetFarEndPathFailureIntervalEntry	1.3.6.1.4.1.2879.2.4.3.2.2.9.1		not-accessible	An entry in the Sonus SONET Far End Path Failure Interval table.
I32 sonusSonetFarEndPathFailureIntervalIfIndex	1.3.6.1.4.1.2879.2.4.3.2.2.9.1.1	Integer32	not-accessible	The ifIndex assigned to this path when it was created. This will not change until the path is deleted.
I32 sonusSonetFarEndPathFailureIntervalPathIndex	1.3.6.1.4.1.2879.2.4.3.2.2.9.1.2	Integer32	read-only	STS1 path index for this table.
I32 sonusSonetFarEndPathFailureIntervalNumber	1.3.6.1.4.1.2879.2.4.3.2.2.9.1.3	Integer32	not-accessible	A number between 1 and 32, which identifies the interval for which the set of statistics is available. The number 1 identifies the most recently completed interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
PER sonusSonetFarEndPathFailureIntervalFCs	1.3.6.1.4.1.2879.2.4.3.2.2.9.1.4	PerfCurrentCount	read-only	The counter associated with the number of Failures encountered by a SONET/SDH Path in the current 15 minute interval.
I32 sonusSonetNextIndex	1.3.6.1.4.1.2879.2.4.3.3	Integer32	read-only	The next valid index to use when creating an entry in the sonusSonetTable.
sonusSonetMIBNotifications	1.3.6.1.4.1.2879.2.4.3.4
sonusSonetMIBNotificationsPrefix	1.3.6.1.4.1.2879.2.4.3.4.0
NTF sonusSonetPortAdminStatusNotification	1.3.6.1.4.1.2879.2.4.3.4.0.1			This trap indicates the Sonet port's administrative status has changed due to an operator-initiated command. Possible admin status is EnabledInService, EnabledOutOfService, Disabled, and DryingUp.
NTF sonusSonetPortOperStatusNotification	1.3.6.1.4.1.2879.2.4.3.4.0.2			NO LONGER SUPPORTED. This trap indicates the Sonet port's operational status has changed.
NTF sonusSonetLineAlarmNotification	1.3.6.1.4.1.2879.2.4.3.4.0.3			This trap indicates the line Section/Line-layer alarm state of the Sonet port has changed.
NTF sonusSonetLineThresholdCrossNotification	1.3.6.1.4.1.2879.2.4.3.4.0.4			This trap indicates that a Section/Line-layer performance monitoring threshold has been crossed.
NTF sonusSonetPathAdminStatusNotification	1.3.6.1.4.1.2879.2.4.3.4.0.5			This trap indicates the Sonet path's administrative status has changed due to an operator-initiated command. Possible admin status is EnabledInService, EnabledOutOfService, Disabled, and DryingUp.
NTF sonusSonetPathOperStatusNotification	1.3.6.1.4.1.2879.2.4.3.4.0.6			NO LONGER SUPPORTED. This trap indicates the Sonet path's operational status has changed.
NTF sonusSonetPathAlarmNotification	1.3.6.1.4.1.2879.2.4.3.4.0.7			This trap indicates the line Path-layer alarm state of the Sonet path has changed.
NTF sonusSonetPathThresholdCrossNotification	1.3.6.1.4.1.2879.2.4.3.4.0.8			This trap indicates that a Path-layer performance monitoring threshold has been crossed.
NTF sonusSonetPortOutOfServiceNotification	1.3.6.1.4.1.2879.2.4.3.4.0.9			This trap indicates the Sonet port went out of service. Reason indicates why the port went out of service. Possible reasons include admin or hardware failure.
NTF sonusSonetPathOutOfServiceNotification	1.3.6.1.4.1.2879.2.4.3.4.0.10			This trap indicates the Sonet path went out of service. Reason indicates why the port went out of service. Possible reasons include admin or hardware failure.
sonusSonetMIBNotificationsObjects	1.3.6.1.4.1.2879.2.4.3.4.1
INT sonusSonetAdminStatus	1.3.6.1.4.1.2879.2.4.3.4.1.1	INTEGER	read-only	The administrative status of a Sonet port. EnabledInService means the port configuration is applied and the port is available to carry calls. EnabledOutOfService means the port configuration is applied and the port is not available to carry calls. Disabled means the port configuration is not applied and the port is not available to carry calls. DryingUp means the port is still carrying in-progress calls but is not available for new calls. Value deleted is NO LONGER SUPPORTED.
INT sonusSonetOperStatus	1.3.6.1.4.1.2879.2.4.3.4.1.2	INTEGER	read-only	Operational status of the Sonet port. Port is inService if the admin state is enabled and the admin mode is in service. Port is outOfService if admin state is enabled, admin mode is out of service, and port is no longer carrying calls (dried up). Port is dryingUp if admin state is enabled, admin mode is out of service, and port is drying up (no new calls, still carrying in-progress calls). Port is inServiceDown if admin state is enabled, admin mode is in service, but physical link is not available due to alarm condition. Port is outOfServiceDown if admin state is enabled, admin mode is out of service, but physical link is not available due to alarm condition. Port is disabled if admin state is disabled, admin mode is out of service, and port is no longer carrying calls (dried up).
INT sonusSonetAlarmStatus	1.3.6.1.4.1.2879.2.4.3.4.1.3	INTEGER	read-only	Alarm conditions.
INT sonusSonetThresholdType	1.3.6.1.4.1.2879.2.4.3.4.1.4	INTEGER	read-only	Threshold crossing types.
I32 sonusPathIndex	1.3.6.1.4.1.2879.2.4.3.4.1.5	Integer32	read-only	STS1 path index.
INT sonusSonetOutOfServiceReason	1.3.6.1.4.1.2879.2.4.3.4.1.6	INTEGER	read-only	Reason the Sonet port/path went out of service.

RFC description

Sonus Networks proprietary MIB for managing SONET (Synchronous Optical Network) interfaces and performance metrics. Used for monitoring SONET-related statistics on Sonus network equipment including multiplexers and switches.

Start monitoring Sonus Networks softswitch platform with SONET/SDH transport (per-port SONET alarm/admin status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONUS-SONET-MIB

What Is SONUS-SONET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description