SONUS-ISUP-SERVICE-GROUP-MIB

All MIBs › SONUS-ISUP-SERVICE-GROUP-MIB

Organization: Sonus Networks, Inc.

Last Updated: 2001-07-31

Category: Sonus Networks VoIP Softswitch, VoIP and Telephony

Description: Manages Sonus Networks softswitch ISUP SS7 service group configuration and signaling point parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONUS-ISUP-SERVICE-GROUP-MIB?

SONUS-ISUP-SERVICE-GROUP-MIB is a proprietary Sonus Networks MIB for configuring ISUP (SS7) service groups on the vendor's softswitch, covering signaling point addressing and call-routing behavior toward PSTN interconnects. It exposes configuration data such as remote point codes, associated trunk groups, switch type, hunt algorithm, circuit cost, and CIC (circuit identification code) control settings. Its monitoring emphasis is on signaling and routing software health: confirming a service group's remote point code is correctly configured and reachable, and that hunt algorithm/cost settings are producing the expected call routing behavior, since a misconfigured entry directly causes failed ISUP call setups. It relates to the ITU-T/ANSI ISUP signaling standards used to address SS7 point codes. Typical deployment is on PSTN interconnect gateways/softswitches using SS7 signaling. Engineers can download the SONUS-ISUP-SERVICE-GROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-ISUP-SERVICE-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks softswitch
SS7 signaling gateway

Monitoring Examples

sonusIsupsgServiceGroupTable/Entry exposes each service group's name, remote point code (sonusIsupsgServiceGroupRemotePointCode), associated trunk group (sonusIsupsgServiceGroupTG), and switch type. Monitoring sonusIsupsgServiceGroupHuntAlgorithm and sonusIsupsgServiceGroupCicControl helps confirm call routing/circuit selection behavior is configured as expected; a service group unexpectedly showing an unreachable remote point code would explain failed ISUP call setups on that trunk.

What Can Be Monitored

service group remote point code
trunk group association
hunt algorithm
circuit cost
CIC control settings
switch type/revision

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus

From SONUS-COMMON-MIB

sonusEventClass	OBJECT-TYPE
sonusEventDescription	OBJECT-TYPE
sonusEventLevel	OBJECT-TYPE

From SONUS-SMI

sonusSignallingMIBs

OBJECT-IDENTITY

From SONUS-TC

PointCode
SonusAdminState
SonusName
SonusNameReference
SonusPointCode
SonusSupportFlag

How to Use in IPNetwork Monitor

Example using sonusIsupMaintReason OID:

Select a Sonus Networks softswitch, SS7 signaling gateway (ISUP point-code/routing configuration) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sonusIsupMaintReason into the Find box to locate it in the OID tree, then select it and click OK. It reports the maintenance reason for blocking/unblocking of the circuit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value changes between polls, since this object only carries a meaningful reason code while the circuit is in a blocked state. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonusIsupServiceGroupMIB	1.3.6.1.4.1.2879.2.6.1			The MIB Module for ISUP Service Group Management.
sonusIsupServiceGroupMIBObjects	1.3.6.1.4.1.2879.2.6.1.1
sonusIsupsgServiceGroup	1.3.6.1.4.1.2879.2.6.1.1.1
I32 sonusIsupsgServiceGroupNextIndex	1.3.6.1.4.1.2879.2.6.1.1.1.1	Integer32	read-only	The next valid index to use when creating a new sonusIsupsgServiceGroupEntry
sonusIsupsgServiceGroupTable	1.3.6.1.4.1.2879.2.6.1.1.1.2		not-accessible	This table contains information about each ISUP Service Group configured to be a member of the node. A management entity may create rows for Service Group that are anticipated to be supported in the future.
sonusIsupsgServiceGroupEntry	1.3.6.1.4.1.2879.2.6.1.1.1.2.1		not-accessible	This table describes the ISUP Service Groups that are configured as members of the GSX9000 ISUP Service Group.
I32 sonusIsupsgServiceGroupListIndex	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.1	Integer32	read-only	The index of the ISUP Service Group entry.
SON sonusIsupsgServiceGroupName	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.2	SonusName	read-write	The name of the ISUP Service Group.
NUM sonusIsupsgServiceGroupRemotePointCode	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.3	PointCode	read-write	Identifies the SS7 Point Code of the ISUP Service Group in decimal format, the least significant three bytes representing Network-Cluster-Member values.
SON sonusIsupsgServiceGroupTG	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.4	SonusNameReference	read-write	The Trunk Group, which the ISUP Service Group belongs to.
INT sonusIsupsgServiceGroupSwitchType	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.5	INTEGER	read-write	The network switch type where the ISUP Service Group resides.
INT sonusIsupsgServiceGroupRevision	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.6	INTEGER	read-write	The revision of the ISUP protocol supported on this Service Group.
INT sonusIsupsgServiceGroupHuntAlgorithm	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.7	INTEGER	read-write	The hunting method used to select circuits for calls destined to the Service Group destination.
I32 sonusIsupsgServiceGroupCost	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.8	Integer32	read-write	The routing cost to the ISUP Service Group.
INT sonusIsupsgServiceGroupCicControl	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.9	INTEGER	read-write	The CICs being controlled to resolve dual seizure.
I32 sonusIsupsgServiceGroupContTestFreq	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.10	Integer32	read-write	Identifies the frequency of continuity test to be performed on each circuit.
INT sonusIsupsgServiceGroupOperation	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.11	INTEGER	read-write	The operation to be applied to the circuits in the ISUP Service Group.
INT sonusIsupsgServiceGroupMode	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.12	INTEGER	read-write	The mode of operation of circuits in the ISUP Service Group.
INT sonusIsupsgServiceGroupAction	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.13	INTEGER	read-write	The action taken on the circuits in the ISUP Service Group.
I32 sonusIsupsgServiceGroupTimeout	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.14	Integer32	read-write	The timeout value in minutes for dryup action on the ISUP Service Group.
SON sonusIsupsgServiceGroupAdminState	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.15	SonusAdminState	read-write	The admin state of the ISUP Service Group.
STR sonusIsupsgServiceGroupProfileName	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.16	DisplayString	read-write	The ISUP Service Group profile name.
ROW sonusIsupsgServiceGroupRowStatus	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.17	RowStatus	read-write
SON sonusIsupsgServiceGroupHopCounterState	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.18	SonusAdminState	read-write	The Hop Counter state for the ISUP Service Group.
I32 sonusIsupsgServiceGroupHopCounterValue	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.19	Integer32	read-write	Specifies the value of the Hop Counter if initiated by the switch.
SON sonusIsupsgServiceGroupDiscTreatmentProfileName	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.20	SonusNameReference	read-write	The disconnect treatment profile to be used for this service.
SON sonusIsupsgServiceGroupTonePackageName	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.21	SonusNameReference	read-write	The tone package to be used for this service.
INT sonusIsupsgServiceGroupGrsStartup	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.22	INTEGER	read-write	Specifies whether support is enabled or disabled for GRS/GRA at Startup for the ISUP Service Group.
INT sonusIsupsgServiceGroupOlipCheck	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.23	INTEGER	read-write	Specifies whether or not to check for the presence of an OLIP when determing that a call is invalid.
NUM sonusIsupsgServiceGroupRemPc	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.24	SonusPointCode	read-write	The Remote point code is not maintained as an OCTET STRING
INT sonusIsupsgServiceGroupExchangeType	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.25	INTEGER	read-write	The exchange type for the ISUP Service Group.
DAT sonusIsupsgServiceGroupInspectionTime	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.26	DateAndTime	read-write	Octet string that identifies the GMT time and date to start Periodic Circuit Inspection. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 * Notes: - the value of year is in network-byte order
INT sonusIsupsgServiceGroupInspectionFreq	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.27	INTEGER	read-write
SON sonusIsupsgServiceGroupInspectionState	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.28	SonusAdminState	read-write
SON sonusIsupsgServiceGroupSignalingProfileName	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.29	SonusNameReference	read-write	The ISUP Signaling Profile to be used for this service.
INT sonusIsupsgServiceGroupAccRespProcess	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.30	INTEGER	read-write	The ACC Processing state for the ISUP Service Group.
I32 sonusIsupsgServiceGroupAccL1ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.31	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 1.
I32 sonusIsupsgServiceGroupAccL1DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.32	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 1.
I32 sonusIsupsgServiceGroupAccL2ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.33	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 2.
I32 sonusIsupsgServiceGroupAccL2DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.34	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 2.
I32 sonusIsupsgServiceGroupAccL3ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.35	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 3.
I32 sonusIsupsgServiceGroupAccL3DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.36	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 3.
I32 sonusIsupsgServiceGroupAccSendACL	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.37	Integer32	read-write	specifies the Max ACL value send to remote node for the ISUP Service Group. 0 means disabled
INT sonusIsupsgServiceGroupGatewayOutage	1.3.6.1.4.1.2879.2.6.1.1.1.2.1.38	INTEGER	read-write	specifies if the service group should try to keep active calls when the ss7 gateway disconnects.
sonusIsupsgServiceGroupStatTable	1.3.6.1.4.1.2879.2.6.1.1.2		not-accessible	This table contains status information about each ISUP access point in the GSX9000 Switch node. ISUP Service Groups within the node can can be configured before SS7 connections is physically attached to the node. The remote ISUP user part may be unavailable or the SS7 links to the destination may not be connected or correctly configured. Therefore, it is possible that an access point can be unavailable, and is absent.
sonusIsupsgServiceGroupStatEntry	1.3.6.1.4.1.2879.2.6.1.1.2.1		not-accessible	This table describes the status of the Service Groups that are configured as destinations ISUP nodes for the GSX9000 Switch node.
I32 sonusIsupsgServiceGroupStatListIndex	1.3.6.1.4.1.2879.2.6.1.1.2.1.1	Integer32	read-only	The index of the ISUP Service Group.
SON sonusIsupsgServiceGroupStatName	1.3.6.1.4.1.2879.2.6.1.1.2.1.2	SonusNameReference	read-only	The name of the ISUP Service Group.
INT sonusIsupsgServiceGroupStatStatus	1.3.6.1.4.1.2879.2.6.1.1.2.1.3	INTEGER	read-only	The state of the ISUP Service Group.
DAT sonusIsupsgServiceGroupStatLastInspectionTime	1.3.6.1.4.1.2879.2.6.1.1.2.1.4	DateAndTime	read-write	Octet string that identifies the GMT time and date of the last Periodic Circuit Inspection. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 * Notes: - the value of year is in network-byte order
DAT sonusIsupsgServiceGroupStatNextInspectionTime	1.3.6.1.4.1.2879.2.6.1.1.2.1.5	DateAndTime	read-write	Octet string that identifies the GMT time and date of the next Periodic Circuit Inspection. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 * Notes: - the value of year is in network-byte order
sonusIsupsgSvcGrpProfile	1.3.6.1.4.1.2879.2.6.1.1.3
I32 sonusIsupsgSvcGrpProfileNextIndex	1.3.6.1.4.1.2879.2.6.1.1.3.1	Integer32	read-only	The next valid index to use when creating a new sonusIsupsgSvcGrpProfileEntry
sonusIsupsgSvcGrpProfileTable	1.3.6.1.4.1.2879.2.6.1.1.3.2		not-accessible	This table contains ISUP Service Group profiles.
sonusIsupsgSvcGrpProfileEntry	1.3.6.1.4.1.2879.2.6.1.1.3.2.1		not-accessible	This table describes the Service Group profile.
I32 sonusIsupsgSvcGrpProfileListIndex	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.1	Integer32	read-only	The index of the ISUP Service Group Profile.
SON sonusIsupsgSvcGrpProfileName	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.2	SonusName	read-write	The name of the ISUP Service Group Profile.
SON sonusIsupsgSvcGrpProfileTG	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.3	SonusNameReference	read-write	The Trunk Group, which the ISUP Service Group belongs to.
INT sonusIsupsgSvcGrpProfileSwitchType	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.4	INTEGER	read-write	The network switch type where the ISUP Service Group resides.
INT sonusIsupsgSvcGrpProfileRevision	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.5	INTEGER	read-write	The revision of the ISUP protocol supported on this Service Group.
INT sonusIsupsgSvcGrpProfileHuntAlgorithm	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.6	INTEGER	read-write	The hunting method used to select circuits for calls destined to the Service Group destination.
I32 sonusIsupsgSvcGrpProfileCost	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.7	Integer32	read-write	The routing cost to the ISUP Service Group.
INT sonusIsupsgSvcGrpProfileCicControl	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.8	INTEGER	read-write	The CICs being controlled to resolve dual seizure.
I32 sonusIsupsgSvcGrpProfileContTestFreq	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.9	Integer32	read-write	Identifies the frequency of continuity test to be performed on each circuit.
SON sonusIsupsgSvcGrpProfileAdminState	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.10	SonusAdminState	read-write	The admin state of the ISUP Service Group Profile.
ROW sonusIsupsgSvcGrpProfileRowStatus	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.11	RowStatus	read-write
SON sonusIsupsgSvcGrpProfileHopCounterState	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.12	SonusAdminState	read-write	The Hop Counter state of the ISUP Service Group Profile.
I32 sonusIsupsgSvcGrpProfileHopCounterValue	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.13	Integer32	read-write	Specifies the value of the Hop Counter if initiated by the switch.
SON sonusIsupsgSvcGrpProfileDiscTreatmentProfileName	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.14	SonusNameReference	read-write	The disconnect treatment profile to be used for this service.
SON sonusIsupsgSvcGrpProfileTonePackageName	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.15	SonusNameReference	read-write	The tone package to be used for this service.
INT sonusIsupsgSvcGrpProfileGrsStartup	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.16	INTEGER	read-write	Specifies whether support is enabled or disabled for GRS/GRA at Startup for the ISUP Service Group.
INT sonusIsupsgSvcGrpProfileOlipCheck	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.17	INTEGER	read-write	Specifies the value of the Hop Counter if initiated by the switch.
INT sonusIsupsgSvcGrpProfileExchangeType	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.18	INTEGER	read-write	The exchange type for the ISUP Service Group.
DAT sonusIsupsgSvcGrpProfileInspectionTime	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.19	DateAndTime	read-write	Octet string that identifies the GMT time and date to start Periodic Circuit Inspection. field octects contents range ----- ------- -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 * Notes: - the value of year is in network-byte order
INT sonusIsupsgSvcGrpProfileInspectionFreq	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.20	INTEGER	read-write
SON sonusIsupsgSvcGrpProfileInspectionState	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.21	SonusAdminState	read-write
SON sonusIsupsgSvcGrpProfileSignalingProfileName	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.22	SonusNameReference	read-write	The ISUP Signaling Profile to be used for this service.
INT sonusIsupsgSvcGrpProfileAccRespProcess	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.23	INTEGER	read-write	The ACC Processing state for the ISUP Service Group Profile.
I32 sonusIsupsgSvcGrpProfileAccL1ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.24	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 1.
I32 sonusIsupsgSvcGrpProfileAccL1DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.25	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 1.
I32 sonusIsupsgSvcGrpProfileAccL2ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.26	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 2.
I32 sonusIsupsgSvcGrpProfileAccL2DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.27	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 2.
I32 sonusIsupsgSvcGrpProfileAccL3ARCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.28	Integer32	read-write	Specifies the percentage of Alternate Routed call to be cancel at Congestion Level 3.
I32 sonusIsupsgSvcGrpProfileAccL3DRCancelpercentage	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.29	Integer32	read-write	Specifies the percentage of Direct Routed call to be cancel at Congestion Level 3.
I32 sonusIsupsgSvcGrpProfileAccSendACL	1.3.6.1.4.1.2879.2.6.1.1.3.2.1.30	Integer32	read-write	specifies the Max ACL value send to remote node for the ISUP Service Group. 0 means disabled
sonusIsupsgCircuitTable	1.3.6.1.4.1.2879.2.6.1.1.4		not-accessible	The Isupsg Circuit table describes the circuits in the indexed Access Point. This table is unavailable if the sonusisupsgServiceGroupStatStatus object indicates that this access point is unavailable. If the sonusNodeServerType object returns either 'absent' or 'unknown' the value of all other objects within this table are indeterministic.
sonusIsupsgCircuitEntry	1.3.6.1.4.1.2879.2.6.1.1.4.1		not-accessible
I32 sonusIsupsgCircuitServiceListIndex	1.3.6.1.4.1.2879.2.6.1.1.4.1.1	Integer32	read-only	The index of the ISUP Service Group circuit is defined for..
I32 sonusIsupsgCircuitIdentityCode	1.3.6.1.4.1.2879.2.6.1.1.4.1.2	Integer32	read-only	Identifies the circuit identity code (CIC) for the circuit.
SON sonusIsupsgCircuitServiceName	1.3.6.1.4.1.2879.2.6.1.1.4.1.3	SonusNameReference	read-write	The name of the ISUP Service Group circuit is under.
SON sonusIsupsgCircuitPortName	1.3.6.1.4.1.2879.2.6.1.1.4.1.4	SonusNameReference	read-write	The name of the port circuit is on.
I32 sonusIsupsgCircuitChannel	1.3.6.1.4.1.2879.2.6.1.1.4.1.5	Integer32	read-write	Identifies the channel the circuit represents.
INT sonusIsupsgCircuitDirection	1.3.6.1.4.1.2879.2.6.1.1.4.1.6	INTEGER	read-write	Identifies the direction of traffic to be allowed on the circuit.
INT sonusIsupsgCircuitMode	1.3.6.1.4.1.2879.2.6.1.1.4.1.7	INTEGER	read-write	The mode of operation of the ISUP Circuit.
INT sonusIsupsgCircuitAction	1.3.6.1.4.1.2879.2.6.1.1.4.1.8	INTEGER	read-write	The action taken on the ISUP Circuit.
I32 sonusIsupsgCircuitTimeout	1.3.6.1.4.1.2879.2.6.1.1.4.1.9	Integer32	read-write	The timeout value in minutes for dryup action on the ISUP Circuit.
SON sonusIsupsgCircuitAdminState	1.3.6.1.4.1.2879.2.6.1.1.4.1.10	SonusAdminState	read-write	The admin state of the ISUP Circuit.
SON sonusIsupsgCircuitProfileName	1.3.6.1.4.1.2879.2.6.1.1.4.1.11	SonusNameReference	read-write	The circuit profile name assigned to the ISUP circuit.
ROW sonusIsupsgCircuitRowStatus	1.3.6.1.4.1.2879.2.6.1.1.4.1.12	RowStatus	read-write
sonusIsupsgCircuitStatTable	1.3.6.1.4.1.2879.2.6.1.1.5		not-accessible	This table contains status information about each ISUP circuit in the GSX9000 Switch node. ISUP circuits within the node can can be configured before SS7 connections is physically attached to the node. The remote ISUP circuit may not be equipped or configured. Therefore, it is possible that an ISUP circuit can be unavailable, and is absent.
sonusIsupsgCircuitStatEntry	1.3.6.1.4.1.2879.2.6.1.1.5.1		not-accessible	This table describes the status of the configured ISUP circuits.
I32 sonusIsupsgCircuitStatServiceListIndex	1.3.6.1.4.1.2879.2.6.1.1.5.1.1	Integer32	read-only	The index of the ISUP Service Group circuit is defined for..
I32 sonusIsupsgCircuitStatIdentityCode	1.3.6.1.4.1.2879.2.6.1.1.5.1.2	Integer32	read-only	Identifies the circuit identity code (CIC) for the circuit.
INT sonusIsupsgCircuitStatUsage	1.3.6.1.4.1.2879.2.6.1.1.5.1.3	INTEGER	read-only	The usage state of the ISUP circuit.
INT sonusIsupsgCircuitStatLocalMaint	1.3.6.1.4.1.2879.2.6.1.1.5.1.4	INTEGER	read-only	The local maintenance state of the ISUP circuit.
INT sonusIsupsgCircuitStatLocalHw	1.3.6.1.4.1.2879.2.6.1.1.5.1.5	INTEGER	read-only	The local hardware state of the ISUP circuit.
INT sonusIsupsgCircuitStatRemoteMaint	1.3.6.1.4.1.2879.2.6.1.1.5.1.6	INTEGER	read-only	The remote maintenance state of the ISUP circuit.
INT sonusIsupsgCircuitStatRemoteHw	1.3.6.1.4.1.2879.2.6.1.1.5.1.7	INTEGER	read-only	The remote hardware state of the ISUP circuit.
INT sonusIsupsgCircuitStatManualCot	1.3.6.1.4.1.2879.2.6.1.1.5.1.8	INTEGER	read-only	The manual continuity test state of the ISUP circuit.
sonusIsupsgFarEndCircuitAdminTable	1.3.6.1.4.1.2879.2.6.1.1.6		not-accessible	This table contains administrative information of ISUP circuits on the far end switch GSX is connected to. ISUP circuits should be configured on the GSX node to get the corresponding far end circuit admin info. The far end ISUP circuit may be not equipped or not configured. Therefore, it is possible that the far end info of an ISUP circuit would be unavailable.
sonusIsupsgFarEndCircuitAdminEntry	1.3.6.1.4.1.2879.2.6.1.1.6.1		not-accessible	This table describes the far end status of the ISUP circuits.
I32 sonusIsupsgFarEndCircuitServiceListIndex	1.3.6.1.4.1.2879.2.6.1.1.6.1.1	Integer32	read-only	The index of the ISUP Service Group far end circuit is defined for.
I32 sonusIsupsgFarEndCircuitIdentityCode	1.3.6.1.4.1.2879.2.6.1.1.6.1.2	Integer32	read-only	Identifies the circuit identity code (CIC) for the circuit.
INT sonusIsupsgFarEndCircuitValidationTestResult	1.3.6.1.4.1.2879.2.6.1.1.6.1.3	INTEGER	read-only	Result of the far end validation test on the circuit.
INT sonusIsupsgFarEndCircuitGroupCarrier	1.3.6.1.4.1.2879.2.6.1.1.6.1.4	INTEGER	read-only	Circuit group carrier indicator of the far end circuit.
INT sonusIsupsgFarEndCircuitCicControl	1.3.6.1.4.1.2879.2.6.1.1.6.1.5	INTEGER	read-only	Double seizing control indicator of the far end circuit group.
INT sonusIsupsgFarEndCircuitAlarmCarrier	1.3.6.1.4.1.2879.2.6.1.1.6.1.6	INTEGER	read-only	Alarm carrier indicator of the far end circuit group.
INT sonusIsupsgFarEndCircuitContinuityRequirement	1.3.6.1.4.1.2879.2.6.1.1.6.1.7	INTEGER	read-only	Continuity check requirements of the far end circuit group.
SON sonusIsupsgFarEndCircuitIdentificationTrunkNumber	1.3.6.1.4.1.2879.2.6.1.1.6.1.8	SonusNameReference	read-only	Trunk number of the far end circuit identification.
SON sonusIsupsgFarEndCircuitIdentificationOfficeA	1.3.6.1.4.1.2879.2.6.1.1.6.1.9	SonusNameReference	read-only	Office identification for the far end circuit. [ Ref: ANSI T1.113/3.11A ] With respect to offices A and Z the following conventions are used: (a) For one-way trunk groups, the originating switch that offers traffic to the trunk group is office A. (b) For two-way trunk groups, the switch with the lower alphanumeric CLLI code is designated office A. (c) For one-way subgroups of a divided trunk group, the originating switch is designated office A. (d) For two-way subgroups of a divided trunk group, the switch with the lower alphanumeric CLLI code is designated office A.
SON sonusIsupsgFarEndCircuitIdentificationOfficeZ	1.3.6.1.4.1.2879.2.6.1.1.6.1.10	SonusNameReference	read-only	Office identification for the far end circuit. [ Ref: ANSI T1.113/3.11A ] With respect to offices A and Z the following conventions are used: (a) For one-way trunk groups, the originating switch that offers traffic to the trunk group is office A. (b) For two-way trunk groups, the switch with the lower alphanumeric CLLI code is designated office A. (c) For one-way subgroups of a divided trunk group, the originating switch is designated office A. (d) For two-way subgroups of a divided trunk group, the switch with the lower alphanumeric CLLI code is designated office A.
SON sonusIsupsgFarEndCircuitLocationIdentification	1.3.6.1.4.1.2879.2.6.1.1.6.1.11	SonusNameReference	read-only	Location identification of the far end circuit in CLLI( town/state/building/subdivision ) format.
INT sonusIsupsgFarEndCircuitCicControlConflict	1.3.6.1.4.1.2879.2.6.1.1.6.1.12	INTEGER	read-only	Double seizing control for farend and nearend conflict indicator of the circuit group.
sonusIsupsgFarEndCircuitStatTable	1.3.6.1.4.1.2879.2.6.1.1.7		not-accessible	This table contains status information of ISUP circuits on the far end switch GSX is connected to. ISUP circuits should be configured on the GSX node to get the corresponding far end circuit status. The far end ISUP circuit may be not equipped or not configured. Therefore, it is possible that the far end status of an ISUP circuit would be unavailable.
sonusIsupsgFarEndCircuitStatEntry	1.3.6.1.4.1.2879.2.6.1.1.7.1		not-accessible	This table describes the far end status of the ISUP circuits.
I32 sonusIsupsgFarEndCircuitStatServiceListIndex	1.3.6.1.4.1.2879.2.6.1.1.7.1.1	Integer32	read-only	The index of the ISUP Service Group far end circuit is defined for.
I32 sonusIsupsgFarEndCircuitStatIdentityCode	1.3.6.1.4.1.2879.2.6.1.1.7.1.2	Integer32	read-only	Identifies the circuit identity code (CIC) for the circuit.
INT sonusIsupsgFarEndCircuitStatStatus	1.3.6.1.4.1.2879.2.6.1.1.7.1.3	INTEGER	read-only	The far end status of the ISUP circuit.
INT sonusIsupsgFarEndCircuitStatLocalMaint	1.3.6.1.4.1.2879.2.6.1.1.7.1.4	INTEGER	read-only	The local maintenance state of the ISUP circuit.
sonusIsupsgSignalingProfile	1.3.6.1.4.1.2879.2.6.1.1.8
I32 sonusIsupsgSignalingProfileNextIndex	1.3.6.1.4.1.2879.2.6.1.1.8.1	Integer32	read-only	The next valid index to use when creating a new sonusIsupsgSignalingProfileEntry
sonusIsupsgSignalingProfileTable	1.3.6.1.4.1.2879.2.6.1.1.8.2		not-accessible	This table contains information about each ISUP Signaling Profile configured to be a member of the node. A management entity may create rows for Signaling Profile that are anticipated to be supported in the future.
sonusIsupsgSignalingProfileEntry	1.3.6.1.4.1.2879.2.6.1.1.8.2.1		not-accessible	This table describes the ISUP Signaling Profile that are configured.
I32 sonusIsupsgSignalingProfileListIndex	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.1	Integer32	read-only	The index of the ISUP Signaling Profile entry.
SON sonusIsupsgSignalingProfileName	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.2	SonusName	read-write	The name of the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCompat	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.3	SonusSupportFlag	read-write	Is compatibility supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAccessDel	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.4	SonusSupportFlag	read-write	Is Access Delivery Information supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.5	SonusSupportFlag	read-write	Is the generic number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenNotif	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.6	SonusSupportFlag	read-write	Is the generic notification parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenDigs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.7	SonusSupportFlag	read-write	Is the generic digits parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileLocNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.8	SonusSupportFlag	read-write	Is the location number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileOrigIscPC	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.9	SonusSupportFlag	read-write	Is the originating ISC point code parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUserTeleService	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.10	SonusSupportFlag	read-write	Is the user teleservice parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSegmentation	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.11	SonusSupportFlag	read-write	Is segmentation supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileFallback	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.12	SonusSupportFlag	read-write	Is fallback supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfilePropDelay	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.13	SonusSupportFlag	read-write	Is propagation delay supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileEMcid	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.14	SonusSupportFlag	read-write	Is MCID supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileHopCounter	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.15	SonusSupportFlag	read-write	Is the hop counter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSubPriorityCls	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.16	SonusSupportFlag	read-write	Is the subscriber priority class parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAPM	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.17	SonusSupportFlag	read-write	Is APM supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConNumInAcm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.18	SonusSupportFlag	read-write	Is the connected number parameter supported in the ACM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCauseInCpg	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.19	SonusSupportFlag	read-write	Is the cause parameter supported in the CPG for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileMultiCarrierEnv	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.20	SonusSupportFlag	read-write	Is the multi carrier environment parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCarrierSelection	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.21	SonusSupportFlag	read-write	Is carrier selection supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileInrInf	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.22	SonusSupportFlag	read-write	Is INR/INF supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCqmCqr	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.23	SonusSupportFlag	read-write	Is CQM/CQR supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallRef	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.24	SonusSupportFlag	read-write	Is the call reference parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCfn	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.25	SonusSupportFlag	read-write	Is CFN supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileFacility	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.26	SonusSupportFlag	read-write	Are FAA, FAR and FRJ supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfilePam	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.27	SonusSupportFlag	read-write	Is PAM supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileObciAnm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.28	SonusSupportFlag	read-write	Is the OBCI parameter supported in the ANM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileDrs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.29	SonusSupportFlag	read-write	Is DRS supported the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.30	SonusSupportFlag	read-write	Is the redirection number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileLpa	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.31	SonusSupportFlag	read-write	Is LPA supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUcic	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.32	SonusSupportFlag	read-write	Is UCIC supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileOlm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.33	SonusSupportFlag	read-write	Is OLM supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileBBRel	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.34	SonusSupportFlag	read-write	Are Blue Book parameters supported in REL for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUsr	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.35	SonusSupportFlag	read-write	Is USR supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileBBIam	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.36	SonusSupportFlag	read-write	Are the Blue Book parameters supported in IAM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallModMsgs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.37	SonusSupportFlag	read-write	Are CMR, CMA and CMRJ supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallDiv	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.38	SonusSupportFlag	read-write	Is call diversion supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallHist	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.39	SonusSupportFlag	read-write	Is the call history parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenRef	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.40	SonusSupportFlag	read-write	Is the generic reference parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileMLPP	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.41	SonusSupportFlag	read-write	Is the MLPP parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileNSF	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.42	SonusSupportFlag	read-write	Is the NSF parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedNumRist	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.43	SonusSupportFlag	read-write	Is the redirection number restriction parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRemoteOp	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.44	SonusSupportFlag	read-write	Is the remote operations parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileServActv	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.45	SonusSupportFlag	read-write	Is the service activation parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSigPointCode	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.46	SonusSupportFlag	read-write	Is the signaling point code parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileTmrPrime	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.47	SonusSupportFlag	read-write	Is the TMR prime parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileTransMedUsed	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.48	SonusSupportFlag	read-write	Is the transimission medium used parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUsiPrime	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.49	SonusSupportFlag	read-write	Is the USI prime parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedNumInAcm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.50	SonusSupportFlag	read-write	Is the rediction number supported in the ACM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedNumInAnm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.51	SonusSupportFlag	read-write	Is the rediretion number supported in the ANM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUuiInRel	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.52	SonusSupportFlag	read-write	Is the UUI parameter supported in the REL for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConReqInFaa	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.53	SonusSupportFlag	read-write	Is the connection request parameter supported in the FAA for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConReqInFar	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.54	SonusSupportFlag	read-write	Is the connection request parameter supported in the FAR for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileFac	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.55	SonusSupportFlag	read-write	Is the FAC supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileEchoControl	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.56	SonusSupportFlag	read-write	Is the echo control parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileBackwardGVNS	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.57	SonusSupportFlag	read-write	Is the backward GVNS parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCircAssMap	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.58	SonusSupportFlag	read-write	Is the circuit assignment map parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCCSS	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.59	SonusSupportFlag	read-write	Is the CCSS parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallDivTreat	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.60	SonusSupportFlag	read-write	Is the call diversion treatment parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCalledInNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.61	SonusSupportFlag	read-write	Is the called IN number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCollectCallReq	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.62	SonusSupportFlag	read-write	Is the collect call request parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConfTreat	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.63	SonusSupportFlag	read-write	Is the conference treatment parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCorrelationId	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.64	SonusSupportFlag	read-write	Is the correlation ID parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallOfrTreat	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.65	SonusSupportFlag	read-write	Is the call offering treatment parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallTransNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.66	SonusSupportFlag	read-write	Is the call transfer number paramaeter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCallTransRef	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.67	SonusSupportFlag	read-write	Is the call transfer reference parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileDispInfo	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.68	SonusSupportFlag	read-write	Is the display information parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileForwardGVNS	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.69	SonusSupportFlag	read-write	Is the forward GVNS parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileLoopPrevention	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.70	SonusSupportFlag	read-write	Is the loop prevention indicators parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileNetworkMgmt	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.71	SonusSupportFlag	read-write	Is network management controls parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSCFId	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.72	SonusSupportFlag	read-write	Is the SCF ID parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUIDActionInd	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.73	SonusSupportFlag	read-write	Is the UID action indicators parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUIDCapInd	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.74	SonusSupportFlag	read-write	Is the UID capabilities parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConNumInCpg	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.75	SonusSupportFlag	read-write	Is the connected number parameter supported in the CPG for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenNumInCpg	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.76	SonusSupportFlag	read-write	Is the generic number parameter supported in the CPG for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileEchoCntrlInIam	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.77	SonusSupportFlag	read-write	Is the echo control parameter supported in the IAM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRemoteOpInRel	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.78	SonusSupportFlag	read-write	Is the remote operations parameter supported in the REL for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAccessTransInFac	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.79	SonusSupportFlag	read-write	Is the access transport parameter supported in the FAC for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenNotifInFac	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.80	SonusSupportFlag	read-write	Is the generic notification parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUuindAnm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.81	SonusSupportFlag	read-write	Is the UUI parameter supported in the ANM for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUuindCpg	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.82	SonusSupportFlag	read-write	Is the UUI parameter supported in the CPG for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileNrmSupport	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.83	SonusSupportFlag	read-write	Is the NRM supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCseInRlc	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.84	SonusSupportFlag	read-write	Is the cause parameter supported in the RLC for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUpaUpt	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.85	SonusSupportFlag	read-write	Are UPA/UPT supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRecInCai	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.86	SonusSupportFlag	read-write	Is the recommnedation field supported in the cause parameter for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileTransitUnrec	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.87	SonusSupportFlag	read-write	Is the transiting of unrecognised parameters supported for the ISUP service Group.
SON sonusIsupsgSignalingProfileCcRaw	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.88	SonusSupportFlag	read-write	Should raw ISUP messages be sent to CC for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCctGrpBlockFlag	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.89	SonusSupportFlag	read-write	The flag to be set to allow CGB and CGU messages in the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCctGrpResetFlag	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.90	SonusSupportFlag	read-write	The flag to be set to allow GRS messages in the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileBaseProfileName	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.91	SonusNameReference	read-write	The ISUP Signaling Profile used as a base for the settings of this Signaling Profile.
SON sonusIsupsgSignalingProfileAdminState	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.92	SonusAdminState	read-write	The admin state of the ISUP Signaling Profile.
ROW sonusIsupsgSignalingProfileRowStatus	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.93	RowStatus	read-write
I32 sonusIsupsgSignalingProfilePropDelayValue	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.94	Integer32	read-write	The propagation delay value in milliseconds for this ISUP signaling profile.
INT sonusIsupsgSignalingProfileU2USrvcLevel	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.95	INTEGER	read-write	The level of user to user services supported in the the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSAM	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.96	SonusSupportFlag	read-write	Is the Subsequent Address Message supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileFOT	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.97	SonusSupportFlag	read-write	Is the Forward Transfer Message supported for the ISUP Signaling Profile.
BIT sonusIsupsgSignalingProfileSpecialDigits	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.98	Bits	read-write	Indicates the special digits which can appear in dialed digit strings BIT 0 - Is digit A allowed in the digit string BIT 1 - Is digit B allowed in the digit string BIT 2 - Is digit C allowed in the digit string BIT 3 - Is digit D allowed in the digit string BIT 4 - Is digit E allowed in the digit string BIT 5 - Is digit F allowed in the digit string BIT 6 - No special digits in the digit string
SON sonusIsupsgSignalingProfileTNS	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.99	SonusSupportFlag	read-write	Is the Transit Network Selection Parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAwaitDigits	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.100	SonusSupportFlag	read-write	Is Await Digits supported for this ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAccessTrans	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.101	SonusSupportFlag	read-write	Is the Access Transport parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileJurisdiction	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.102	SonusSupportFlag	read-write	Is the Jurisdiction parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileOCN	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.103	SonusSupportFlag	read-write	Is the Original Called Number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileBusinessGrp	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.104	SonusSupportFlag	read-write	Is the Business Group parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileConReq	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.105	SonusSupportFlag	read-write	Is the Conection Request parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileInfoInd	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.106	SonusSupportFlag	read-write	Is the Information Indicator parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileNtp	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.107	SonusSupportFlag	read-write	Is the Network Transport supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileNotifInd	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.108	SonusSupportFlag	read-write	Is the Notification Indicator parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedInfoAcm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.109	SonusSupportFlag	read-write	Is the Redirection Information parameter supported in the ACM message for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileEgressService	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.110	SonusSupportFlag	read-write	Is the Egress Service parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileServCodeInd	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.111	SonusSupportFlag	read-write	Is the Service Code Indicator parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSpecProcReq	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.112	SonusSupportFlag	read-write	Is the Special Processing Request parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileTransReq	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.113	SonusSupportFlag	read-write	Is the Transaction Request parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileChgNum	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.114	SonusSupportFlag	read-write	Is the Charge Number parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenAddressREL	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.115	SonusSupportFlag	read-write	Is the Generic Address parameter supported in the REL message for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUUIndAcm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.116	SonusSupportFlag	read-write	Is the User to User Indicators parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileUUInfo	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.117	SonusSupportFlag	read-write	Is the User to User Information parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileOperatorServInfo	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.118	SonusSupportFlag	read-write	Is the Operator Service Information parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCvtCvr	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.119	SonusSupportFlag	read-write	Are the Circuit Validation Test/Response procedures supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileGenName	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.120	SonusSupportFlag	read-write	Is the Generic Name parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedCap	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.121	SonusSupportFlag	read-write	Is the Redirection Capability parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileRedCount	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.122	SonusSupportFlag	read-write	Is the Group Redirection Count parameter supported for the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileSendTwoGrpMsgs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.123	SonusSupportFlag	read-write	Set the Flag to Send Two Group Messages in the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAwaitTwoGrpMsgs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.124	SonusSupportFlag	read-write	Set the Flag to Await Two Group Messages in the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileCqmOnCardSwap	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.125	SonusSupportFlag	read-write	Set the Flag to perform CQM on Card Swap in the ISUP Signaling Profile.
SON sonusIsupsgSignalingProfileAnsi95Grs	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.126	SonusSupportFlag	read-write	Should the ANSI-95 format for Group Reset Circuit (GRS), which includes optional parameters, be used.
SON sonusIsupsgSignalingProfileCpgBeforeAcm	1.3.6.1.4.1.2879.2.6.1.1.8.2.1.127	SonusSupportFlag	read-write	Should a CPG arriving before an ACM be transited.
sonusIsupServiceGroupMIBNotifications	1.3.6.1.4.1.2879.2.6.1.2
sonusIsupServiceGroupMIBNotificationsPrefix	1.3.6.1.4.1.2879.2.6.1.2.0
NTF sonusIsupSvcGrpInServiceNotification	1.3.6.1.4.1.2879.2.6.1.2.0.1			This trap indicates that the ISUP Service Group was put in service by maintenance staff.
NTF sonusIsupSvcGrpOutOfServiceNotification	1.3.6.1.4.1.2879.2.6.1.2.0.2			This trap indicates that the ISUP Service Group was taken out of service by maintenance staff.
NTF sonusIsupCircuitBlockedNotification	1.3.6.1.4.1.2879.2.6.1.2.0.3			This trap indicates that the ISUP Circuit(s) were blocked.
NTF sonusIsupCircuitUnblockedNotification	1.3.6.1.4.1.2879.2.6.1.2.0.4			This trap indicates that the ISUP Circuit(s) were unblocked.
NTF sonusIsupCircuitResetNotification	1.3.6.1.4.1.2879.2.6.1.2.0.5			This trap indicates that the ISUP Circuit(s) were reset.
NTF sonusIsupContinuityRecheckFailureNotification	1.3.6.1.4.1.2879.2.6.1.2.0.6			This trap indicates that the Continuity Recheck on the ISUP circuit failed.
NTF sonusIsupCicRegistrationFailedNotification	1.3.6.1.4.1.2879.2.6.1.2.0.7			This trap indicates that the CIC Registration failed after multiple retries.
NTF sonusIsupHopCounterExhaustedNotification	1.3.6.1.4.1.2879.2.6.1.2.0.8			This trap indicates that the Hop Counter value received in IAM is zero.
NTF sonusIsupRelWithExchangeRoutingErrorNotification	1.3.6.1.4.1.2879.2.6.1.2.0.9			This trap indicates that a REL message is received with Exchange Routing Error cause value.
NTF sonusIsupCqmTimeoutNotification	1.3.6.1.4.1.2879.2.6.1.2.0.10			This trap indicates that the timed out has occured waiting for CQM response
NTF sonusIsupCvtTimeoutNotification	1.3.6.1.4.1.2879.2.6.1.2.0.11			This trap indicates that the timed out has occured waiting for CVT response
NTF sonusIsupFarendCircuitStateMismatchedNotification	1.3.6.1.4.1.2879.2.6.1.2.0.12			This trap indicates that the circuit/block state is mismatched as report by CQR
NTF sonusIsupCircuitTimerExpired	1.3.6.1.4.1.2879.2.6.1.2.0.13			This trap indicates that the ISUP Circuit had a timer expire.
sonusIsupServiceGroupMIBNotificationsObjects	1.3.6.1.4.1.2879.2.6.1.2.1
STR sonusIsupSvcGrpName	1.3.6.1.4.1.2879.2.6.1.2.1.1	DisplayString	read-only	Name of the ISUP service group.
INT sonusIsupMaintReasonEx	1.3.6.1.4.1.2879.2.6.1.2.1.2	INTEGER	read-only	Maintenance reason for blocking/unblocking of the circuit.
STR sonusIsupTrunkGrpName	1.3.6.1.4.1.2879.2.6.1.2.1.3	DisplayString	read-only	Name of the trunk group.
I32 sonusIsupCircuit	1.3.6.1.4.1.2879.2.6.1.2.1.4	Integer32	read-only	Base circuit identity code (CIC) for the circuit.
BIT sonusIsupCircuitOffsets	1.3.6.1.4.1.2879.2.6.1.2.1.5	Bits	read-only	Circuit maintenance status bitmap for CIC range starting with base CIC.
STR sonusIsupCalledPartyNumber	1.3.6.1.4.1.2879.2.6.1.2.1.6	DisplayString	read-only	Called Party Number.
STR sonusIsupCallingPartyNumber	1.3.6.1.4.1.2879.2.6.1.2.1.7	DisplayString	read-only	Calling Party Number.
STR sonusIsupMaintCode	1.3.6.1.4.1.2879.2.6.1.2.1.8	DisplayString	read-only	Maintainence code.

RFC description

Manages ISUP service group configurations for telephony signaling on Sonus network elements.

Start monitoring Sonus Networks softswitch, SS7 signaling gateway (ISUP point-code/routing configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONUS-ISUP-SERVICE-GROUP-MIB