SONUS-NODE-RESOURCES-MIB

All MIBs › SONUS-NODE-RESOURCES-MIB

Organization: Sonus Networks, Inc.

Last Updated: 2001-07-31

Category: Sonus Networks VoIP Softswitch

Description: Monitors Sonus Networks softswitch node hardware resources including CPU, memory, and module inventory.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONUS-NODE-RESOURCES-MIB?

SONUS-NODE-RESOURCES-MIB is a vendor MIB from Sonus Networks covering hardware and service-profile resource management on their softswitch/media gateway node platforms. It exposes service profile configuration objects defining voice circuit/packet encoding parameters (bandwidth, network echo cancellation enable, frame size) as well as tone-related resource objects and broader node resource inventory under sonusNodeResourcesMIBObjects. This MIB supports monitoring of software/service-level status such as service profile state and configuration, which indirectly reflects the health of underlying hardware voice/media processing resources (e.g., DSP-based codec and echo-cancellation resources) on the node. It works in conjunction with other Sonus platform MIBs such as SONUS-ALARM-CONTACT-MIB and SONUS-EVENT-LOG-MIB to give a fuller picture of node hardware and fault status, and depends on the common SONUS-SMI enterprise root. Typical deployment context is carrier VoIP/TDM softswitch and gateway nodes where service profiles govern how voice circuits are encoded and how DSP resources are allocated. Engineers can download the SONUS-NODE-RESOURCES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-NODE-RESOURCES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks (Ribbon Communications) softswitch/media gateway node

Monitoring Examples

An admin would poll sonusServProfileTable/sonusServProfileEntry to check sonusServProfileState for each configured profile, confirming it is active, and inspect sonusServProfileVCktEncoding/sonusServProfileVPktEncoding to verify the correct codec is applied to circuit- and packet-side legs. Monitoring sonusServProfileVCktBandwidth and sonusServProfileVCktNecEnable would reveal whether echo cancellation and bandwidth allocation match the expected call quality configuration. An unexpected sonusServProfileState transition to a disabled or fault state would indicate a resource allocation problem affecting call processing on that node.

What Can Be Monitored

service profile operational state
voice circuit/packet codec encoding
echo cancellation settings
circuit bandwidth allocation
node resource inventory

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From SONUS-COMMON-MIB

sonusEventClass	OBJECT-TYPE
sonusEventDescription	OBJECT-TYPE
sonusEventLevel	OBJECT-TYPE

From SONUS-SMI

sonusResourcesMIBs

OBJECT-IDENTITY

From SONUS-TC

SonusAdminState
SonusName
SonusNameReference

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonusNodeResourcesMIB	1.3.6.1.4.1.2879.2.2.2			The MIB Module for Node Resources Management.
sonusNodeResourcesMIBObjects	1.3.6.1.4.1.2879.2.2.2.1
sonusServProfile	1.3.6.1.4.1.2879.2.2.2.1.1
I32 sonusServProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.1.1	Integer32	read-only	This field is deprecated. The next valid index to use when creating an entry in the sonusServProfileTable.
sonusServProfileTable	1.3.6.1.4.1.2879.2.2.2.1.1.2		not-accessible	This field is deprecated. This table specifies the service profile list for the node.
sonusServProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.1.2.1		not-accessible	This field is deprecated.
I32 sonusServProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.1	Integer32	read-only	This field is deprecated. Identifies the target service profile entry.
INT sonusServProfileState	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.2	INTEGER	read-write	This field is deprecated. The administrative state of this service profile entry.
SON sonusServProfileName	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.3	SonusName	read-write	This field is deprecated. The user name of this service profile.
INT sonusServProfileType	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.4	INTEGER	read-write	This field is deprecated. The type of endpoint (circuit or packet) supported by this service profile. Circuit endpoints support all the VCkt and VPkt profile parameters for echo cancellation and packetization. Packet endpoints support only the VPkt parameters for packetization.
INT sonusServProfileVCktEncoding	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.5	INTEGER	read-write	This field is deprecated. The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.
I32 sonusServProfileVCktBandwidth	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.6	Integer32	read-write	This field is deprecated. The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
INT sonusServProfileVCktNecEnable	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.7	INTEGER	read-write	This field is deprecated. Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the Voice Packet Assembler/Disassember (VPAD) operates in a circuit emulation mode.
INT sonusServProfileVPktEncoding	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.8	INTEGER	read-write	This field is deprecated. The audio encoding method to be performed on the packet data received from, and destined to the IP network. The default encoding method is G.711 Ulaw.
I32 sonusServProfileVPktFrameSize	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.9	Integer32	read-write	This field is deprecated. Specifies the number of samples per frame. For G.711 encoding mode, value must be a multiple of 8 samples. For G.723 encoding mode, value must be a multiple of 240 samples. For G.729A, value must be a multiple of 80 samples. Note that 8 samples represent one millisecond of voice data. A value of 0 specifies a frame size equal to the minimum for the encoding method (e.g 8 samples for G.711)
I32 sonusServProfileVPktFramesPerPacket	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.10	Integer32	read-write	This field is deprecated. Specifies the number of frames to transmit per packet. For G.711 encoding mode, valid values range from 5 to 40 frames, in increments of 5 frames. The default value for G.711 is 10 frames per packet. For G.723 encoding mode, valid values are 1 or 2, with a default value of 1 frame per packet. A value of 0 specifies the number of frames per packet equal to the default value for the encoding mode (e.g. 10 frames per packet for G.711).
I32 sonusServProfileVPktMaxNetworkJitter	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.11	Integer32	read-write	This field is deprecated. Specifies the maximum expected network jitter across the IP network in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 80 (10msec).
I32 sonusServProfileVPktTosValue	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.12	Integer32	read-write	This field is deprecated. Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
INT sonusServProfileCttTestType	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.13	INTEGER	read-write	This field is deprecated. For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.
I32 sonusServProfileCttTimeout	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.14	Integer32	read-write	This field is deprecated. For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
I32 sonusServProfileCttMinDetectTime	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.15	Integer32	read-write	This field is deprecated. For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
I32 sonusServProfileCttMinReleaseTime	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.16	Integer32	read-write	This field is deprecated. For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
INT sonusServProfileCapability	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.17	INTEGER	read-write	This field is deprecated. Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.
INT sonusServProfileDPktRestrictedCfg	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.18	INTEGER	read-write	This field is deprecated. Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.
I32 sonusServProfileDPktRtpPayloadType	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.19	Integer32	read-write	This field is deprecated. Specifies the RTP payload type to be included in the RTP header of the voice data packet
I32 sonusServProfileDPktMaxNetworkJitter	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.20	Integer32	read-write	This field is deprecated. Specifies the maximum expected network jitter across the network for data calls in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. A separate value for data calls is provided to allow a single service profile to specify the jitter buffer size for both voice calls and data calls. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 400 (50msec).
ROW sonusServProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.1.2.1.21	RowStatus	read-write	This field is deprecated.
sonusSonicBusStatTable	1.3.6.1.4.1.2879.2.2.2.1.2		not-accessible	This table presents Sonic Bus statistics for the node.
sonusSonicBusStatEntry	1.3.6.1.4.1.2879.2.2.2.1.2.1		not-accessible
I32 sonusSonicBusStatShelfIndex	1.3.6.1.4.1.2879.2.2.2.1.2.1.1	Integer32	read-only	Identifies the target shelf.
I32 sonusSonicBusStatNumCalls	1.3.6.1.4.1.2879.2.2.2.1.2.1.2	Integer32	read-only	Indicates the number of active calls on the shelf.
I32 sonusSonicBusStatBwAllocated	1.3.6.1.4.1.2879.2.2.2.1.2.1.3	Integer32	read-only	Indicates the percentage of Sonic Bus bandwidth allocated to the active calls on the shelf.
I32 sonusSonicBusStatSduCount	1.3.6.1.4.1.2879.2.2.2.1.2.1.4	Integer32	read-only	Indicates the number of Sonic Bus data units allocated to the active calls on the shelf.
sonusActiveCallTable	1.3.6.1.4.1.2879.2.2.2.1.3		not-accessible	This table presents the active call data for the node.
sonusActiveCallEntry	1.3.6.1.4.1.2879.2.2.2.1.3.1		not-accessible
I32 sonusActiveCallShelfIndex	1.3.6.1.4.1.2879.2.2.2.1.3.1.1	Integer32	read-only	Identifies the target shelf.
I32 sonusActiveCallSlotIndex	1.3.6.1.4.1.2879.2.2.2.1.3.1.2	Integer32	read-only	Identifies the target slot.
I32 sonusActiveCallIndex	1.3.6.1.4.1.2879.2.2.2.1.3.1.3	Integer32	read-only	Identifies the target call index.
I32 sonusActiveCallId	1.3.6.1.4.1.2879.2.2.2.1.3.1.4	Integer32	read-only	Represents the global call identifier (GCID) for the call. GCID is unique across the entire node.
I32 sonusActiveCallSonicBusUnitsAllocated	1.3.6.1.4.1.2879.2.2.2.1.3.1.5	Integer32	read-only	Represents the SonicBus bandwidth allocated for the call expressed as SonicData Units per second.
I32 sonusActiveCallNumResources	1.3.6.1.4.1.2879.2.2.2.1.3.1.6	Integer32	read-only	Represents the number of resources currently allocated to the call.
STR sonusActiveCallState	1.3.6.1.4.1.2879.2.2.2.1.3.1.7	DisplayString	read-only	Represents the current call state.
STR sonusActiveCallIngressServProfile	1.3.6.1.4.1.2879.2.2.2.1.3.1.8	DisplayString	read-only	The name of the ingress service profile associated with this call.
STR sonusActiveCallEgressServProfile	1.3.6.1.4.1.2879.2.2.2.1.3.1.9	DisplayString	read-only	The name of the egress service profile associated with this call.
STR sonusActiveCallCallingNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.10	DisplayString	read-only	The E.164 number representing the Calling Party's telephone number.
STR sonusActiveCallCalledNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.11	DisplayString	read-only	The E.164 number representing the Called Party's telephone number.
INT sonusActiveCallAddressTransPerformed	1.3.6.1.4.1.2879.2.2.2.1.3.1.12	INTEGER	read-only	Indicates whether any address translation has been performed on the called party number. Valid translations are Local Number Portability (LPN), and 800 number translation (Tollfree).
STR sonusActiveCallOrigCalledNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.13	DisplayString	read-only	If an address translation has been performed on the called party number, this entry contains the original, untranslated number.
STR sonusActiveCallScenarioType	1.3.6.1.4.1.2879.2.2.2.1.3.1.14	DisplayString	read-only	Specifies the call scenario type for this call.
I32 sonusActiveCallIngressPstnSlotNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.15	Integer32	read-only	For calls originating from the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
I32 sonusActiveCallIngressPstnPortNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.16	Integer32	read-only	For calls originating from the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
I32 sonusActiveCallIngressPstnChannelNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.17	Integer32	read-only	For calls originating from the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
I32 sonusActiveCallIngressPstnChannelCount	1.3.6.1.4.1.2879.2.2.2.1.3.1.18	Integer32	read-only	For calls originating from the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
I32 sonusActiveCallIngressPstnChannelBitMap	1.3.6.1.4.1.2879.2.2.2.1.3.1.19	Integer32	read-only	For calls originating from the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
I32 sonusActiveCallEgressPstnSlotNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.20	Integer32	read-only	For calls delivered to the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
I32 sonusActiveCallEgressPstnPortNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.21	Integer32	read-only	For calls delivered to the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
I32 sonusActiveCallEgressPstnChannelNum	1.3.6.1.4.1.2879.2.2.2.1.3.1.22	Integer32	read-only	For calls delivered to the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
I32 sonusActiveCallEgressPstnChannelCount	1.3.6.1.4.1.2879.2.2.2.1.3.1.23	Integer32	read-only	For calls delivered to the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
I32 sonusActiveCallEgressPstnChannelBitMap	1.3.6.1.4.1.2879.2.2.2.1.3.1.24	Integer32	read-only	For calls delivered to the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
IP sonusActiveCallIngressLocalIpSockAddr	1.3.6.1.4.1.2879.2.2.2.1.3.1.25	IpAddress	read-only	For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) local socket connection.
IP sonusActiveCallIngressRemoteIpSockAddr	1.3.6.1.4.1.2879.2.2.2.1.3.1.26	IpAddress	read-only	For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) remote socket connection.
IP sonusActiveCallEgressLocalIpSockAddr	1.3.6.1.4.1.2879.2.2.2.1.3.1.27	IpAddress	read-only	For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) local socket connection.
IP sonusActiveCallEgressRemoteIpSockAddr	1.3.6.1.4.1.2879.2.2.2.1.3.1.28	IpAddress	read-only	For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) remote socket connection.
STR sonusActiveCallIngressPstnTrunk	1.3.6.1.4.1.2879.2.2.2.1.3.1.29	DisplayString	read-only	For calls originating from the PSTN (circuit) side, specifies the trunk group name to which the Ingress Pstn Channel belongs.
STR sonusActiveCallEgressPstnTrunk	1.3.6.1.4.1.2879.2.2.2.1.3.1.30	DisplayString	read-only	For calls delivered to the PSTN (circuit) side, specifies the trunk group name to which the Egress Pstn Channel belongs.
STR sonusActiveCallIngressIpDestGwName	1.3.6.1.4.1.2879.2.2.2.1.3.1.31	DisplayString	read-only	For calls originating from the IP (packet) side, specifies the name of the remote gateway on which the call originated.
STR sonusActiveCallEgressIpDestGwName	1.3.6.1.4.1.2879.2.2.2.1.3.1.32	DisplayString	read-only	For calls delivered to the IP (packet) side, specifies the name of the remote gateway to which the call was delivered.
I32 sonusActiveCallDuration	1.3.6.1.4.1.2879.2.2.2.1.3.1.33	Integer32	read-only	Indicates the duration in seconds for this call following answer.
INT sonusActiveCallIngressEpType	1.3.6.1.4.1.2879.2.2.2.1.3.1.34	INTEGER	read-only	Indicates the end point type for the ingress end point.
INT sonusActiveCallEgressEpType	1.3.6.1.4.1.2879.2.2.2.1.3.1.35	INTEGER	read-only	Indicates the end point type for the egress end point.
INT sonusActiveCallIngressSgType	1.3.6.1.4.1.2879.2.2.2.1.3.1.36	INTEGER	read-only	Indicates the signaling type for the ingress end point.
INT sonusActiveCallEgressSgType	1.3.6.1.4.1.2879.2.2.2.1.3.1.37	INTEGER	read-only	Indicates the signaling type for the egress end point.
I32 sonusActiveCallPacketsSent	1.3.6.1.4.1.2879.2.2.2.1.3.1.38	Integer32	read-only	Indicates the number of RTP packets sent on this call.
I32 sonusActiveCallPacketsReceived	1.3.6.1.4.1.2879.2.2.2.1.3.1.39	Integer32	read-only	Indicates the number of RTP packets received on this call.
I32 sonusActiveCallOctetsSent	1.3.6.1.4.1.2879.2.2.2.1.3.1.40	Integer32	read-only	Indicates the number of RTP octets sent on this call.
I32 sonusActiveCallOctetsReceived	1.3.6.1.4.1.2879.2.2.2.1.3.1.41	Integer32	read-only	Indicates the number of RTP octets received on this call.
I32 sonusActiveCallPacketsLost	1.3.6.1.4.1.2879.2.2.2.1.3.1.42	Integer32	read-only	Indicates the number of RTP packets lost on this call.
I32 sonusActiveCallPacketsDiscarded	1.3.6.1.4.1.2879.2.2.2.1.3.1.43	Integer32	read-only	Indicates the number of RTP packets discarded by the jitter buffer.
I32 sonusActiveCallInterarrivalJitter	1.3.6.1.4.1.2879.2.2.2.1.3.1.44	Integer32	read-only	Indicates the interarrival packet jitter on this call.
I32 sonusActiveCallPacketLatency	1.3.6.1.4.1.2879.2.2.2.1.3.1.45	Integer32	read-only	Indicates the latency experienced on this call.
sonusCallResTable	1.3.6.1.4.1.2879.2.2.2.1.4		not-accessible	This table presents the call resource data for the node. Each active call contains a set of allocated resources. This table provides a brief description and the information required to access detailed information about each allocated resource.
sonusCallResEntry	1.3.6.1.4.1.2879.2.2.2.1.4.1		not-accessible
I32 sonusCallResShelfIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.1	Integer32	read-only	Identifies the target shelf containing the call to be accessed.
I32 sonusCallResSlotIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.2	Integer32	read-only	Identifies the target slot containing the call to be accessed.
I32 sonusCallResCallIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.3	Integer32	read-only	Identifies the target call to be accessed.
I32 sonusCallResIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.4	Integer32	read-only	Identifies the target resource index to access within the call.
I32 sonusCallResId	1.3.6.1.4.1.2879.2.2.2.1.4.1.5	Integer32	read-only	Represents the internal resource identifier that uniquely represents the resource to the resource manager entity responsible for the resource.
I32 sonusCallResCallId	1.3.6.1.4.1.2879.2.2.2.1.4.1.6	Integer32	read-only	Represents the global call identifier (GCID) for the call to which this resource is allocated. This information is provided to ensure that the resource is truly allocated to the call.
INT sonusCallResType	1.3.6.1.4.1.2879.2.2.2.1.4.1.7	INTEGER	read-only	Specifies the resource type for this resource.
I32 sonusCallResMgrHandle	1.3.6.1.4.1.2879.2.2.2.1.4.1.8	Integer32	read-only	Specifies the internal handle for the resource manager entity responsible for this resource. This element is provided for information only.
I32 sonusCallResMgrShelfIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.9	Integer32	read-only	Specifies the shelf on which this resource resides.
I32 sonusCallResMgrSlotIndex	1.3.6.1.4.1.2879.2.2.2.1.4.1.10	Integer32	read-only	Specifies the card slot on which this resource resides.
sonusCallPegCountsTable	1.3.6.1.4.1.2879.2.2.2.1.5		not-accessible	This table presents call peg count statistics for the node.
sonusCallPegCountsEntry	1.3.6.1.4.1.2879.2.2.2.1.5.1		not-accessible
I32 sonusCallPegCountsShelfIndex	1.3.6.1.4.1.2879.2.2.2.1.5.1.1	Integer32	read-only	Identifies the target shelf to obtain the call counters.
I32 sonusCallPegCountsSlotIndex	1.3.6.1.4.1.2879.2.2.2.1.5.1.2	Integer32	read-only	Identifies the target slot.
INT sonusCallPegCountsReset	1.3.6.1.4.1.2879.2.2.2.1.5.1.3	INTEGER	read-create	Provides a means to reset the active call attempt and completion counters. Any set operation on this object will result in the attempt and completion counters being cleared.
I32 sonusCallPegCountsAttempts	1.3.6.1.4.1.2879.2.2.2.1.5.1.4	Integer32	read-only	Indicates the number of call attempts on this shelf.
I32 sonusCallPegCountsCompletions	1.3.6.1.4.1.2879.2.2.2.1.5.1.5	Integer32	read-only	Indicates the total number of completed call attempts on this shelf.
I32 sonusCallPegCountsActiveCalls	1.3.6.1.4.1.2879.2.2.2.1.5.1.6	Integer32	read-only	Indicates the current number of active calls in the shelf.
I32 sonusCallPegCountsStableCalls	1.3.6.1.4.1.2879.2.2.2.1.5.1.7	Integer32	read-only	Indicates the current number of stable calls in the shelf.
I32 sonusCallPegCountsUpdates	1.3.6.1.4.1.2879.2.2.2.1.5.1.8	Integer32	read-only	Indicates the number of call updates (modifications) on this shelf.
I32 sonusCallPegCountsActiveCallsNonUser	1.3.6.1.4.1.2879.2.2.2.1.5.1.9	Integer32	read-only	Indicates the current number of active non-call associated signalling channels in the shelf. (ie ISDN D channel)
I32 sonusCallPegCountsStableCallsNonUser	1.3.6.1.4.1.2879.2.2.2.1.5.1.10	Integer32	read-only	Indicates the current number of stable non-call associated signalling channels in the shelf. (ie ISDN D channel)
sonusToneObjects	1.3.6.1.4.1.2879.2.2.2.1.6
sonusToneProfile	1.3.6.1.4.1.2879.2.2.2.1.6.1
I32 sonusToneProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.6.1.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusToneProfileTable.
sonusToneProfileTable	1.3.6.1.4.1.2879.2.2.2.1.6.1.2		not-accessible	This table contains tone profiles for the node.
sonusToneProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1		not-accessible
I32 sonusToneProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.1	Integer32	read-only	Identifies the tone profile entry.
SON sonusToneProfileName	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.2	SonusName	read-write	The user name of this tone profile.
INT sonusToneProfileGenerationMethod	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.3	INTEGER	read-write	Determines the generation method for the tone. This value is specified at object creation time and cannot be modified.
I32 sonusToneProfileTone1Freq	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.4	Integer32	read-write	Specifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone or dualTone.
I32 sonusToneProfileTone1Power	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.5	Integer32	read-write	Specifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone or dualTone.
I32 sonusToneProfileTone2Freq	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.6	Integer32	read-write	Specifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone.
I32 sonusToneProfileTone2Power	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.7	Integer32	read-write	Specifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone.
I32 sonusToneProfileCarrierFreq	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.8	Integer32	read-write	Specifies the frequency in Hertz of the carrier for the modulated signal. Value must be less than 4000. If set to 0, then silence is generated. Only valid if generation method is modulatedTone.
I32 sonusToneProfileSignalFreq	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.9	Integer32	read-write	Specifies the frequency in Hertz of the sinusoid modulating the carrier sinusoid. Value must be less than 4000. Only valid if generation method is modulatedTone.
I32 sonusToneProfileModPower	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.10	Integer32	read-write	Specifies Carrier Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is modulatedTone.
I32 sonusToneProfileModIndex	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.11	Integer32	read-write	Specifies the modulation index of the signal. Value must be in the range of 0 to 300 in 1% units. Only valid if generation method is modulatedTone.
I32 sonusToneProfileMake1	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.12	Integer32	read-write	Duration of the first on cadence in milliseconds. If 0, then the duration of the first on cadence is 0 msec. If -1, then the tone is played continuously.
I32 sonusToneProfileBreak1	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.13	Integer32	read-write	Duration of the first off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
I32 sonusToneProfileMake2	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.14	Integer32	read-write	Duration of the second on cadence in milliseconds. If 0, then the duration of the second on cadence is 0 msec. If -1, then the tone is played continuously.
I32 sonusToneProfileBreak2	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.15	Integer32	read-write	Duration of the second off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
I32 sonusToneProfileMake3	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.16	Integer32	read-write	Duration of the thrid on cadence in milliseconds. If 0, then the duration of the third on cadence is 0 msec. If -1, then the tone is played continuously.
I32 sonusToneProfileBreak3	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.17	Integer32	read-write	Duration of the third off cadence in milliseconds. If 0, then silence is not generated after the third on cadence. If -1, then silence is generated continuously.
I32 sonusToneProfileRepeat	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.18	Integer32	read-write	Number of cadence cycles to generate. If 0, then the tone pattern is repeated indefinitely.
ROW sonusToneProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.19	RowStatus	read-write
sonusToneType	1.3.6.1.4.1.2879.2.2.2.1.6.2
I32 sonusToneTypeNextIndex	1.3.6.1.4.1.2879.2.2.2.1.6.2.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusToneTypeTable.
sonusToneTypeTable	1.3.6.1.4.1.2879.2.2.2.1.6.2.2		not-accessible	This table contains tone types for the node.
sonusToneTypeEntry	1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1		not-accessible
I32 sonusToneTypeIndex	1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.1	Integer32	read-only	Identifies the tone type entry.
SON sonusToneTypeName	1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.2	SonusName	read-write	The user name of this tone type. Possible types include 'dial', 'busy', 'reorder', etc.
ROW sonusToneTypeRowStatus	1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.3	RowStatus	read-write
sonusTonePackage	1.3.6.1.4.1.2879.2.2.2.1.6.3
I32 sonusTonePackageNextIndex	1.3.6.1.4.1.2879.2.2.2.1.6.3.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusTonePackageTable.
sonusTonePackageTable	1.3.6.1.4.1.2879.2.2.2.1.6.3.2		not-accessible	This table contains tone packages for the node.
sonusTonePackageEntry	1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1		not-accessible
I32 sonusTonePackageIndex	1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.1	Integer32	read-only	Identifies the tone package.
SON sonusTonePackageName	1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.2	SonusName	read-write	The name of this tone package. This name should reflect the country or carrier which will be using this package.
ROW sonusTonePackageRowStatus	1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.3	RowStatus	read-write
sonusTonePkgElem	1.3.6.1.4.1.2879.2.2.2.1.6.4
sonusTonePkgElemTable	1.3.6.1.4.1.2879.2.2.2.1.6.4.1		not-accessible	This table contains elements which bind tone types to tone profiles for a given tone package.
sonusTonePkgElemEntry	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1		not-accessible
I32 sonusTonePkgElemIndex	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.1	Integer32	read-only	Identifies the target tone package element.
SON sonusTonePkgElemTonePackageRef	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.2	SonusNameReference	read-write	Identifies the tone packge for this element.
SON sonusTonePkgElemToneTypeRef	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.3	SonusNameReference	read-write	Identifies the tone type for this element.
SON sonusTonePkgElemToneProfileRef	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.4	SonusNameReference	read-write	The name of the tone profile that this tone type maps to for this tone package.
ROW sonusTonePkgElemRowStatus	1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.5	RowStatus	read-write
sonusDigitProfile	1.3.6.1.4.1.2879.2.2.2.1.7
I32 sonusDigitProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.7.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusDigitProfileTable.
sonusDigitProfileTable	1.3.6.1.4.1.2879.2.2.2.1.7.2		not-accessible	This table contains digit profiles for the node. Digit Profiles contain both digit generation (sonusDigitProfileGen...) and digit detection (sonusDigitProfileDet...) parameters.
sonusDigitProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.7.2.1		not-accessible
I32 sonusDigitProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.1	Integer32	read-only	Identifies the digit profile entry.
SON sonusDigitProfileName	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.2	SonusName	read-write	The user name of this digit profile.
INT sonusDigitProfileType	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.3	INTEGER	read-write	Specifies the digit's format. This value is set at object creation time and cannot be modified.
I32 sonusDigitProfileGenPower	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.4	Integer32	read-write	Specifies digit generation power level in dBm. Power level ranges from -50 dBm (minimum power) to +3 dBm (maximum power).
I32 sonusDigitProfileGenMake	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.5	Integer32	read-write	Specifies duration of generated digits in milliseconds.
I32 sonusDigitProfileGenBreak	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.6	Integer32	read-write	Specifies silence between generated digits in milliseconds.
I32 sonusDigitProfileDetMinPower	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.7	Integer32	read-write	Specifies minimum power level in dBm required for digit detection. Valid levels range from -45dBm to -25dBm.
I32 sonusDigitProfileDetMinOnDuration	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.8	Integer32	read-write	Specifies minimum tone duration in milliseconds required for digit detection. The value must in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 25ms and 100ms.
I32 sonusDigitProfileDetMinOffDuration	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.9	Integer32	read-write	Specifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms.
INT sonusDigitProfileDetFreqAcceptRange	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10	INTEGER	read-write	Specifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digits the value represents only the accept range. Frequencies detected within the accept range will result in digit detection. Frequencies detected outside the reject range will not result in digit detection. . DTMF DTMF MFR1 VALUE ENUMERATION ACCEPT REJECT ACCEPT ----- ----------- ---------------- ------------------ 1 narrow +/-2.0% +/-3.0% +/-(1.5% + 5Hz) 2 medium +/-2.5% +/-3.5% +/-(1.5% + 10Hz) 3 wide +/-3.0% +/-4.0% +/-(1.5% + 15Hz) 4 wider +/-3.5% +/-4.5% N/A
I32 sonusDigitProfileDtmfDetTwistCutoff	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.11	Integer32	read-write	For DTMF digit detection only. Twist is the ratio of high group power to low. Twist ratios below the twist cutoff will result in digit detection. Twist ratios above the twist cutoff will result in digit rejection. Value must be between 4dB and 12dB in increments of 2dB.
I32 sonusDigitProfileMfr1GenMakeKp	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.12	Integer32	read-write	Specifies duration of generated KP digit in milliseconds. Only applicable if digit type is MFR1.
ROW sonusDigitProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.7.2.1.13	RowStatus	read-write
sonusStaticCall	1.3.6.1.4.1.2879.2.2.2.1.8
I32 sonusStaticCallNextIndex	1.3.6.1.4.1.2879.2.2.2.1.8.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusStaticCallAdmnTable
sonusStaticCallAdmnTable	1.3.6.1.4.1.2879.2.2.2.1.8.2		not-accessible	This table specifies the static call list for the node.
sonusStaticCallAdmnEntry	1.3.6.1.4.1.2879.2.2.2.1.8.2.1		not-accessible
I32 sonusStaticCallAdmnIndex	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.1	Integer32	read-only	Identifies the target static call entry.
INT sonusStaticCallAdmnState	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.2	INTEGER	read-write	The administrative state of this static call entry.
SON sonusStaticCallAdmnName	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.3	SonusName	read-write	The user name of this static call.
I32 sonusStaticCallAdmnEndPointAShelf	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.4	Integer32	read-write	A 32-bit integer identifying the shelf of the end point A
I32 sonusStaticCallAdmnEndPointASlot	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.5	Integer32	read-write	A 32-bit integer identifying the slot of the end point A
I32 sonusStaticCallAdmnEndPointAPort	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.6	Integer32	read-write	Port index of end point A.
I32 sonusStaticCallAdmnEndPointAChannel	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.7	Integer32	read-write	Indicates the DS0 channel of the end point A
SON sonusStaticCallAdmnEndPointAServProfile	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.8	SonusName	read-write	The service profile used for end point A
INT sonusStaticCallAdmnEndPointBType	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.9	INTEGER	read-write	The type of end point B (circuit or packet).
I32 sonusStaticCallAdmnEndPointBShelf	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.10	Integer32	read-write	A 32-bit integer identifying the shelf of the end point B
I32 sonusStaticCallAdmnEndPointBSlot	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.11	Integer32	read-write	A 32-bit integer identifying the slot of the end point B
I32 sonusStaticCallAdmnEndPointBPort	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.12	Integer32	read-write	Port index of end point B.
I32 sonusStaticCallAdmnEndPointBChannel	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.13	Integer32	read-write	Indicates the DS0 channel of the end point B
I32 sonusStaticCallAdmnEndPointBLocalRTPPort	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.14	Integer32	read-write	Indicates the local RTP port.
IP sonusStaticCallAdmnEndPointBLocalIpAddress	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.15	IpAddress	read-write	The IP Address of the end point B if it is packet
I32 sonusStaticCallAdmnEndPointBRemoteRTPPort	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.16	Integer32	read-write	Indicates the remote RTP port.
IP sonusStaticCallAdmnEndPointBRemoteIpAddress	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.17	IpAddress	read-write	The IP Address of the end point B if it is packet
SON sonusStaticCallAdmnEndPointBServProfile	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.18	SonusName	read-write	The service profile used for end point B
INT sonusStaticCallAdmnCircuitMode	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.19	INTEGER	read-write	The circuit mode for this static call
ROW sonusStaticCallAdmnRowStatus	1.3.6.1.4.1.2879.2.2.2.1.8.2.1.20	RowStatus	read-write
sonusStaticCallStatTable	1.3.6.1.4.1.2879.2.2.2.1.9		not-accessible	The Manual Call Stat Table
sonusStaticCallStatEntry	1.3.6.1.4.1.2879.2.2.2.1.9.1		not-accessible	An entry in the Manual Call Stat Table
I32 sonusStaticCallStatIndex	1.3.6.1.4.1.2879.2.2.2.1.9.1.1	Integer32	read-only	The index for target static call.
I32 sonusStaticCallStatCallId	1.3.6.1.4.1.2879.2.2.2.1.9.1.2	Integer32	read-only	The call identifier(GCID) assigned to this static call
STR sonusStaticCallStatState	1.3.6.1.4.1.2879.2.2.2.1.9.1.3	DisplayString	read-only	The status of the static call
STR sonusStaticCallStatTime	1.3.6.1.4.1.2879.2.2.2.1.9.1.4	DisplayString	read-only	Displays the Date/time the connection was created
sonusStaticCallActionObjects	1.3.6.1.4.1.2879.2.2.2.1.10
I32 sonusStaticCallGcid	1.3.6.1.4.1.2879.2.2.2.1.10.1	Integer32	read-write	The call identifier for a call to be deleted
INT sonusStaticCallAction	1.3.6.1.4.1.2879.2.2.2.1.10.2	INTEGER	read-write	The action that should be taken on the call
sonusCallTrace	1.3.6.1.4.1.2879.2.2.2.1.11
I32 sonusCallTraceNextIndex	1.3.6.1.4.1.2879.2.2.2.1.11.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusCallTraceTable.
sonusCallTraceTable	1.3.6.1.4.1.2879.2.2.2.1.11.2		not-accessible	This table specifies the Call Trace Table
sonusCallTraceEntry	1.3.6.1.4.1.2879.2.2.2.1.11.2.1		not-accessible
I32 sonusCallTraceIndex	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.1	Integer32	read-only	The index of this Call Trace entry.
INT sonusCallTraceState	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.2	INTEGER	read-write	The administrative state of this Call Trace entry.
SON sonusCallTraceName	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.3	SonusName	read-write	The name of this Call Trace entry.
INT sonusCallTraceType	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.4	INTEGER	read-write	The trace type of this Call Trace entry.
STR sonusCallTraceCalledNumber	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.5	DisplayString	read-write	The called number being traced.
STR sonusCallTraceCallingNumber	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.6	DisplayString	read-write	The calling number being traced.
INT sonusCallTraceLevel	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.7	INTEGER	read-write	The trace level of this call trace entry, currently only one level is supported.
ROW sonusCallTraceRowStatus	1.3.6.1.4.1.2879.2.2.2.1.11.2.1.8	RowStatus	read-write
sonusCktServProfile	1.3.6.1.4.1.2879.2.2.2.1.12
I32 sonusCktServProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.12.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusCktServProfileTable.
sonusCktServProfileTable	1.3.6.1.4.1.2879.2.2.2.1.12.2		not-accessible	This table specifies the Circuit service profile list for the node.
sonusCktServProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.12.2.1		not-accessible
I32 sonusCktServProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.1	Integer32	read-only	Identifies the target circuit service profile entry.
INT sonusCktServProfileState	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.2	INTEGER	read-write	The administrative state of this circuit service profile entry.
SON sonusCktServProfileName	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.3	SonusName	read-write	The name of this circuit service profile.
INT sonusCktServProfileAudioEncoding	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.4	INTEGER	read-write	The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.
I32 sonusCktServProfileBandwidth	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.5	Integer32	read-write	The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
INT sonusCktServProfileNecEnable	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.6	INTEGER	read-write	Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the echo chaceller is bypassed.
INT sonusCktServProfileCttTestType	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7	INTEGER	read-write	For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.
I32 sonusCktServProfileCttTimeout	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.8	Integer32	read-write	For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
I32 sonusCktServProfileCttMinDetectTime	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.9	Integer32	read-write	For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
I32 sonusCktServProfileCttMinReleaseTime	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.10	Integer32	read-write	For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
INT sonusCktServProfileCapability	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.11	INTEGER	read-write	Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.
INT sonusCktServProfileDataRestrictedCfg	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.12	INTEGER	read-write	Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.
SON sonusCktServProfileDtmfProfileName	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.13	SonusNameReference	read-write	The name of DTMF profile associated with this circuit service profile.
ROW sonusCktServProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.14	RowStatus	read-write
INT sonusCktServProfileInterworkingXfrCap	1.3.6.1.4.1.2879.2.2.2.1.12.2.1.15	INTEGER	read-write	The transfer capability for audio calls when interworking with CAS. The default transfer capability is speech.
sonusPktServProfile	1.3.6.1.4.1.2879.2.2.2.1.13
I32 sonusPktServProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.13.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusPktServProfileTable.
sonusPktServProfileTable	1.3.6.1.4.1.2879.2.2.2.1.13.2		not-accessible	This table specifies the packet service profile list for the node.
sonusPktServProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.13.2.1		not-accessible
I32 sonusPktServProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.1	Integer32	read-only	Identifies the target packet service profile entry.
INT sonusPktServProfileState	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.2	INTEGER	read-write	The administrative state of this packet service profile entry.
SON sonusPktServProfileName	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.3	SonusName	read-write	The user name of this packet service profile.
INT sonusPktServProfileDestProtocol	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.4	INTEGER	read-write	Specifies the Packet Destination Protocal used. GSX - uses Sonus GSX-GSX MCS protocol. h323 - uses H.323 protocol.
INT sonusPktServProfilePrfdAudioEncoding	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.5	INTEGER	read-write	The preferred audio encoding method to be performed on the packet data received from, and destined to the IP network. The possible options are: G.711, G.711 with Silence Suppression, G.729A and G.729A+B. The default encoding method is G.711. For G.711, the law is determined by Circuit Service Profile.
I32 sonusPktServProfilePrfdFramesPerPacket	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.6	Integer32	read-write	Specifies the Preferred Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
I32 sonusPktServProfileDefFramesPerPacket	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.7	Integer32	read-write	Specifies the default Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
INT sonusPktServProfileDefAudioEnable	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.8	INTEGER	read-write	Specifies whether or not to allow default Audio (G.711). If enabled, allow use of G.711 if preferred audio resource is not available. If disabled, Do not use of G.711 if preferred audio resource is not available and the call is disconnected.
I32 sonusPktServProfileSilenceFactor	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.9	Integer32	read-write	Specifies percentage of call time that silence is expected.
I32 sonusPktServProfileVInitPlayoutBufDelay	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.10	Integer32	read-write	This value defines the size of the initial playout bufferrequired to absorb the maximum expected voice packet delay across the network. Range from 1 ms to 50 ms, in increments of 1 ms.
INT sonusPktServProfileFaxRelay	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.11	INTEGER	read-write	If never is specified, Fax Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, Fax Relay is used if the compressed resource is available. If always is specified, Fax Relay is used regardless of the audio encoding method.
INT sonusPktServProfileDtmfRelay	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.12	INTEGER	read-write	If never is specified, DTMF Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, DTMF Relay is used if the compressed resource is available. If always is specified, DTMF Relay is used regardless of the audio encoding method.
INT sonusPktServProfileFallbackHandling	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.13	INTEGER	read-write	This specifies the behavior when a compressed codec call needs to revert to G.711 (e.g., to pass modem data) and there is no bandwidth available.
I32 sonusPktServProfileTosValue	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.14	Integer32	read-write	Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
I32 sonusPktServProfileDInitPlayoutBufDelay	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.15	Integer32	read-write	This value defines the size of the initial playout buffer required to absorb the maximum expected data packet delay across the network. Range from 5 ms to 50 ms, in increments of 1 ms. The default value is 50 ms.
I32 sonusPktServProfileDataRtpPayloadType	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.16	Integer32	read-write	Specifies the RTP payload type to be included in the RTP header of the data packet
ROW sonusPktServProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.17	RowStatus	read-write
INT sonusPktServProfileG711SendSidPackets	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.18	INTEGER	read-write	Specifies whether sending SID packets is enabled. This applies only if preferred audio encoding is G.711 with silence suppression.
I32 sonusPktServProfileG711SidRtpPayloadType	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.19	Integer32	read-write	Specifies G.711 SID RTP payload type. This applies only if preferred audio encoding is G.711 with silence suppression. Range 0 to 127.
INT sonusPktServProfileSidHeartbeat	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.20	INTEGER	read-write	Specifies whether sending SID heartbeat packets is enabled. This applies if preferred audio encoding is either G.711 with silence suppression or G.729A+B.
INT sonusPktServProfileRtcp	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.21	INTEGER	read-write	Specifies whether RTCP is enabled for the call.
I32 sonusPktServProfilePacketLossThreshold	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.22	Integer32	read-write	Specifies the RTCP packet loss threshold in packets/100,000. 0 means no detection. Requires RTCP to be enabled.
INT sonusPktServProfilePacketLossAction	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.23	INTEGER	read-write	Specifies the action taken when the packet loss threshold is exceeded. Requires RTCP to be enabled.
INT sonusPktServProfileRtpPeerAbsenceAction	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.24	INTEGER	read-write	Specifies the action taken when the RTP peer is detected to be absent (due to lack of RTP and RTCP packets). Requires RTCP to be enabled.
INT sonusPktServProfileDtmfRelayOutOfBand	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.25	INTEGER	read-write	Specifies whether out of band DTMF relay is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .
INT sonusPktServProfileDtmfRelayRemoveDigits	1.3.6.1.4.1.2879.2.2.2.1.13.2.1.26	INTEGER	read-write	Specifies whether removing DTMF digits from the media stream is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .
sonusDisconnectTreatmentObjects	1.3.6.1.4.1.2879.2.2.2.1.14
sonusDiscTreatProfile	1.3.6.1.4.1.2879.2.2.2.1.14.1
I32 sonusDiscTreatProfileNextIndex	1.3.6.1.4.1.2879.2.2.2.1.14.1.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusDiscTreatProfileTable.
sonusDiscTreatProfileTable	1.3.6.1.4.1.2879.2.2.2.1.14.1.2		not-accessible	This table contains Disconnect Treatment Profiles for the node.
sonusDiscTreatProfileEntry	1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1		not-accessible
I32 sonusDiscTreatProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.1	Integer32	not-accessible	Identifies the Disconnect Treatment Profile.
SON sonusDiscTreatProfileName	1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.2	SonusName	read-write	The user name of this Disconnect Treatment Profile.
ROW sonusDiscTreatProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.3	RowStatus	read-write
sonusDiscTreatmentAdmnTable	1.3.6.1.4.1.2879.2.2.2.1.14.2		not-accessible
sonusDiscTreatmentAdmnEntry	1.3.6.1.4.1.2879.2.2.2.1.14.2.1		not-accessible
I32 sonusDiscTreatmentProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.14.2.1.1	Integer32	not-accessible	Identifies the Disconnect Treatment Profile to which this entry belongs.
I32 sonusDiscTreatmentIndex	1.3.6.1.4.1.2879.2.2.2.1.14.2.1.2	Integer32	not-accessible	Identifies the target Disconnect Treatment entry.
I32 sonusDiscTreatmentReason	1.3.6.1.4.1.2879.2.2.2.1.14.2.1.3	Integer32	read-only	Disconnect Reason Code.
SON sonusDiscTreatmentSigSeqProfileName	1.3.6.1.4.1.2879.2.2.2.1.14.2.1.4	SonusNameReference	read-write	For given Disconnect Treatment Profile and Disconnect Reason Code, execute this Disconnect SSP.
ROW sonusDiscTreatmentRowStatus	1.3.6.1.4.1.2879.2.2.2.1.14.2.1.5	RowStatus	read-write
sonusDiscSspGroupAdmn	1.3.6.1.4.1.2879.2.2.2.1.14.3
I32 sonusDiscSspNextIndex	1.3.6.1.4.1.2879.2.2.2.1.14.3.1	Integer32	read-only	The next valid index to use when creating a new sonusDiscSspGroupAdmnEntry
sonusDiscSspAdmnTable	1.3.6.1.4.1.2879.2.2.2.1.14.3.2		not-accessible
sonusDiscSspAdmnEntry	1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1		not-accessible
I32 sonusDiscSigSeqProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.1	Integer32	not-accessible	Identifies the target Disconnect Signal Sequence Profile.
SON sonusDiscSigSeqProfileName	1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.2	SonusName	read-write	The user name of this Disconnect Signal Sequence Profile.
ROW sonusDiscSigSeqProfileRowStatus	1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.3	RowStatus	read-write
sonusDiscSigSeqAdmnTable	1.3.6.1.4.1.2879.2.2.2.1.14.4		not-accessible
sonusDiscSigSeqAdmnEntry	1.3.6.1.4.1.2879.2.2.2.1.14.4.1		not-accessible
I32 sonusDiscSigSequenceProfileIndex	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.1	Integer32	not-accessible
I32 sonusDiscSigSequenceIndex	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.2	Integer32	not-accessible
I32 sonusDiscSigSequencePosition	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.3	Integer32	read-write
INT sonusDiscSigSequenceToken	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.4	INTEGER	read-write
STR sonusDiscSigSequenceParam1	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.5	DisplayString	read-write
STR sonusDiscSigSequenceParam2	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.6	DisplayString	read-write
SON sonusDiscSigSequenceAdminState	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.7	SonusAdminState	read-write
ROW sonusDiscSigSequenceRowStatus	1.3.6.1.4.1.2879.2.2.2.1.14.4.1.8	RowStatus	read-write
sonusTestCall	1.3.6.1.4.1.2879.2.2.2.1.15
I32 sonusTestCallNextIndex	1.3.6.1.4.1.2879.2.2.2.1.15.1	Integer32	read-only	The next valid index to use when creating an entry in the sonusTestCallAdmnTable
sonusTestCallAdmnTable	1.3.6.1.4.1.2879.2.2.2.1.15.2		not-accessible	This table specifies the test call list for the node.
sonusTestCallAdmnEntry	1.3.6.1.4.1.2879.2.2.2.1.15.2.1		not-accessible
I32 sonusTestCallAdmnIndex	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.1	Integer32	read-only	Identifies the target test call entry.
INT sonusTestCallAdmnState	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.2	INTEGER	read-write	The administrative state of this test call entry.
SON sonusTestCallAdmnName	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.3	SonusName	read-write	The user name of this test call.
I32 sonusTestCallAdmnEndPointShelf	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.4	Integer32	read-write	A 32-bit integer identifying the shelf of the end point
I32 sonusTestCallAdmnEndPointSlot	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.5	Integer32	read-write	A 32-bit integer identifying the slot of the end point
I32 sonusTestCallAdmnEndPointPort	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.6	Integer32	read-write	Port index of end point.
I32 sonusTestCallAdmnEndPointChannel	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.7	Integer32	read-write	Indicates the DS0 channel of the end point.
ROW sonusTestCallAdmnRowStatus	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.8	RowStatus	read-write
INT sonusTestCallAdmnType	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.9	INTEGER	read-write	The circuit type for this test call.
I32 sonusTestCallAdmnPower	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.10	Integer32	read-write	The power in dBm of the tone to play.
I32 sonusTestCallAdmnFrequency	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.11	Integer32	read-write	The frequency in Hz of the tone to play or listen for.
I32 sonusTestCallAdmnStatPower	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.12	Integer32	read-write	The dBm of the tone received in LISTEN mode.
I32 sonusTestCallAdmnStatPowerTenths	1.3.6.1.4.1.2879.2.2.2.1.15.2.1.13	Integer32	read-write	The tenths of dBm of the tone received in LISTEN mode.
sonusTestCallStatTable	1.3.6.1.4.1.2879.2.2.2.1.16		not-accessible	The Manual Call Stat Table
sonusTestCallStatEntry	1.3.6.1.4.1.2879.2.2.2.1.16.1		not-accessible	An entry in the Manual Call Stat Table
I32 sonusTestCallStatIndex	1.3.6.1.4.1.2879.2.2.2.1.16.1.1	Integer32	read-only	The index for target test call.
I32 sonusTestCallStatCallId	1.3.6.1.4.1.2879.2.2.2.1.16.1.2	Integer32	read-only	The call identifier(GCID) assigned to this test call
STR sonusTestCallStatState	1.3.6.1.4.1.2879.2.2.2.1.16.1.3	DisplayString	read-only	The status of the test call
STR sonusTestCallStatTime	1.3.6.1.4.1.2879.2.2.2.1.16.1.4	DisplayString	read-only	Displays the Date/time the connection was created
sonusTestCallActionObjects	1.3.6.1.4.1.2879.2.2.2.1.17
I32 sonusTestCallGcid	1.3.6.1.4.1.2879.2.2.2.1.17.1	Integer32	read-write	The call identifier for a call to be deleted
INT sonusTestCallAction	1.3.6.1.4.1.2879.2.2.2.1.17.2	INTEGER	read-write	The action that should be taken on the call
sonusNodeResourcesMIBNotifications	1.3.6.1.4.1.2879.2.2.2.2
sonusNodeResourcesMIBNotificationsPrefix	1.3.6.1.4.1.2879.2.2.2.2.0
NTF sonusNodeResourcesCallAdmissionSuspendedNotification	1.3.6.1.4.1.2879.2.2.2.2.0.1			This trap indicates that call admission into the GSX has been suspended. Information provided by this trap includes the reason why call admission has been suspended.
NTF sonusNodeResourcesCallAdmissionEnabledNotification	1.3.6.1.4.1.2879.2.2.2.2.0.2			This trap indicates that call admission into the GSX has been enabled. Information provided by this trap includes the reason why call admission has been enabled.
NTF sonusNodeResourcesCallTraceHitNotification	1.3.6.1.4.1.2879.2.2.2.2.0.3			This trap indicates that call trace filter had a hit. Information provided by this trap includes the called number and the calling number.
sonusNodeResourcesMIBNotificationsObjects	1.3.6.1.4.1.2879.2.2.2.2.1
STR sonusCallAdmissionChangeReason	1.3.6.1.4.1.2879.2.2.2.2.1.1	DisplayString	read-only	The reason why the call admission control state has changes.

RFC description

Monitors node resources and service profiles for Sonus Networks communication servers and media gateways.

Start monitoring Sonus Networks (Ribbon Communications) softswitches/media gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONUS-NODE-RESOURCES-MIB

What Is SONUS-NODE-RESOURCES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description