SONUS-CAS-MIB

All MIBs › SONUS-CAS-MIB

Organization: Sonus Networks, Inc.

Last Updated: 2001-02-03

Category: Sonus Networks VoIP Softswitch, VoIP and Telephony

Description: Manages Sonus Networks channel-associated signaling configuration for TDM trunk interfaces and signaling variants.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONUS-CAS-MIB?

SONUS-CAS-MIB is a vendor MIB from Sonus Networks (a softswitch/media gateway vendor, later part of Ribbon Communications) for managing Channel-Associated Signaling (CAS) service groups used in TDM trunk signaling. It exposes configuration for CAS service groups, including signal type, hunt algorithm, trunk group association, cost, and ingress/egress signaling system point (SSP) settings, managed through an administrative table. Its monitoring value is primarily configuration/service-status oriented: administrators verify a CAS service group's signal type and hunt algorithm are correctly provisioned, and track service group state to confirm trunk signaling is active and correctly routing calls, which is critical to call completion success in a TDM-to-IP softswitch deployment. It works alongside Sonus's DS1/DS3 TDM interface MIBs (such as SONUS-DS1-MIB), since CAS signaling is configured on top of those physical TDM trunk interfaces. Typical deployment is in carrier or enterprise voice networks where a Sonus softswitch/gateway interconnects legacy TDM trunks using CAS signaling with an IP-based voice network. Engineers can download the SONUS-CAS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONUS-CAS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks softswitch/media gateway

Monitoring Examples

A telecom operator would poll sonusCasServiceGroupAdmnTable (via sonusCassgServiceGroupIndex) to confirm each configured CAS service group's sonusCassgServiceGroupSignalType and sonusCassgServiceGroupHuntAlgorithm match the expected trunk group provisioning. Checking sonusCassgServiceGroupTG and sonusCassgServiceGroupCost helps verify correct trunk group association and routing preference. A misconfigured sonusCassgServiceGroupIngressSSP or egress SSP setting would explain call routing failures on that particular CAS-signaled trunk group.

What Can Be Monitored

CAS service group configuration
signal type per service group
hunt algorithm/trunk group association
ingress/egress SSP settings

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From SONUS-COMMON-MIB

sonusEventClass	OBJECT-TYPE
sonusEventDescription	OBJECT-TYPE
sonusEventLevel	OBJECT-TYPE

From SONUS-SMI

sonusSignallingMIBs

OBJECT-IDENTITY

From SONUS-TC

SonusAdminAction
SonusAdminState
SonusName
SonusNameReference
SonusServiceState

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonusCasMIB	1.3.6.1.4.1.2879.2.6.5			The MIB Module for CAS Service Group Management.
sonusCasMIBObjects	1.3.6.1.4.1.2879.2.6.5.1
sonusCasServiceGroup	1.3.6.1.4.1.2879.2.6.5.1.1
I32 sonusCasServiceGroupNextIndex	1.3.6.1.4.1.2879.2.6.5.1.1.1	Integer32	read-only	The next valid index to use when creating a new sonusCasServiceGroupAdmnEntry
sonusCasServiceGroupAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.1.2		not-accessible
sonusCasServiceGroupAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.1.2.1		not-accessible
I32 sonusCassgServiceGroupIndex	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.1	Integer32	read-only	The index for the CAS Service Group
SON sonusCassgServiceGroupName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.2	SonusName	read-write	The name of this CAS Service Group.
SON sonusCassgServiceGroupProfileName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.3	SonusNameReference	read-write	The last CAS Service Group profile applied
SON sonusCassgServiceGroupTG	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.4	SonusNameReference	read-write	The trunk group that the CAS Service Group in contained
INT sonusCassgServiceGroupHuntAlgorithm	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.5	INTEGER	read-write	The method in which channels are hunted for outgoing calls
I32 sonusCassgServiceGroupCost	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.6	Integer32	read-write	Relative cost parameter used to augment the hunt algorithm
INT sonusCassgServiceGroupSignalType	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.7	INTEGER	read-write	The channel associated signaling type
SON sonusCassgServiceGroupIngressSSP	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.8	SonusNameReference	read-write	The SSP which defines the protocol for ingress calls
SON sonusCassgServiceGroupEgressSSP	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.9	SonusNameReference	read-write	The SSP which defines the protocol for egress calls
SON sonusCassgServiceGroupHookflashSSP	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.10	SonusNameReference	read-write	The SSP which defines the protocol when a hookflash is received on an egress call
SON sonusCassgServiceGroupPscSSP	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.11	SonusNameReference	read-write	The SSP which defines Permenant Signal Condition actions to perform to force a call onhook
SON sonusCassgServiceGroupMaintBusy	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.12	SonusAdminState	read-write	Determines if a channel is taken offhook when it is removed from service
I32 sonusCassgServiceGroupAutoBusyThreshold	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.13	Integer32	read-write	Determines the number of signaling errors which can occur before the channel is removed from service
SON sonusCassgServiceGroupRequiresCPTone	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.14	SonusAdminState	read-write	Determines if ingress calls require call progress tones
SON sonusCassgServiceGroupProvidesCPTone	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.15	SonusAdminState	read-write	Determines if the far end switch will provide call progress tones
SON sonusCassgServiceGroupDTMFProfileName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.16	SonusNameReference	read-write	Name reference to DTMF collection/generation profile
SON sonusCassgServiceGroupMFProfileName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.17	SonusNameReference	read-write	Name reference to MF collection/generation profile
SON sonusCassgServiceGroupCPTonePkgName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.18	SonusNameReference	read-write	Name reference to Call Progress tone package
I32 sonusCassgServiceGroupMinRxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.19	Integer32	read-write	Minimum duration for a receive wink event
I32 sonusCassgServiceGroupMaxRxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.20	Integer32	read-write	Maximum duration for a receive wink event
I32 sonusCassgServiceGroupMinRxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.21	Integer32	read-write	Minimum duration for a receive flash event
I32 sonusCassgServiceGroupMaxRxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.22	Integer32	read-write	Maximum duration for a receive flash event
I32 sonusCassgServiceGroupTxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.23	Integer32	read-write	Duration for a transmit wink
I32 sonusCassgServiceGroupTxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.24	Integer32	read-write	Duration for a transmit flash
I32 sonusCassgServiceGroupGuardTime	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.25	Integer32	read-write	Duration for the line to clear after disconnect
INT sonusCassgServiceGroupOperation	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.26	INTEGER	read-write	This objects always reads as noAction(1). Setting this object to resetStats(2) causes the statistics for the channels in the Service Group to be reset.
SON sonusCassgServiceGroupAdminState	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.27	SonusAdminState	read-write	The admin state of the CAS Service Group
SON sonusCassgServiceGroupMode	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.28	SonusServiceState	read-write	The mode of operation of channels in the CAS Service Group
SON sonusCassgServiceGroupAction	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.29	SonusAdminAction	read-write	The action taken on the channels in the CAS Service Group
I32 sonusCassgServiceGroupTimeout	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.30	Integer32	read-write	The timeout value in minutes for dryup action on the CAS Service Group
SON sonusCassgServiceGroupAlertToneName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.31	SonusNameReference	read-write	Specifies a named reference to a tone to play for ring back.
ROW sonusCassgServiceGroupRowStatus	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.32	RowStatus	read-write
SON sonusCassgServiceGroupDTProfileName	1.3.6.1.4.1.2879.2.6.5.1.1.2.1.33	SonusNameReference	read-write	Name reference to Disconnect Treatment profile
sonusCasSvcGrpProfileAdmn	1.3.6.1.4.1.2879.2.6.5.1.2
I32 sonusCasSvcGrpProfileNextIndex	1.3.6.1.4.1.2879.2.6.5.1.2.1	Integer32	read-only	The next valid index to use when creating a new sonusCasSvcGrpProfileAdmnEntry
sonusCasSvcGrpProfileAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.2.2		not-accessible
sonusCasSvcGrpProfileAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.2.2.1		not-accessible
I32 sonusCassgSvcGrpProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.1	Integer32	read-only	The index for the CAS Service Group Profile
SON sonusCassgSvcGrpProfileName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.2	SonusName	read-write	The name of this CAS Service Group profile.
SON sonusCassgSvcGrpProfileTG	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.3	SonusNameReference	read-write	The trunk group that the CAS Service Group in contained
INT sonusCassgSvcGrpProfileHuntAlgorithm	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.4	INTEGER	read-write	The method in which channels are hunted for outgoing calls
I32 sonusCassgSvcGrpProfileCost	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.5	Integer32	read-write	Relative cost parameter used to augment the hunt algorithm
INT sonusCassgSvcGrpProfileSignalType	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.6	INTEGER	read-write	The channel associated signaling type
SON sonusCassgSvcGrpProfileIngressSSP	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.7	SonusNameReference	read-write	The SSP which defines the protocol for ingress calls
SON sonusCassgSvcGrpProfileEgressSSP	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.8	SonusNameReference	read-write	The SSP which defines the protocol for egress calls
SON sonusCassgSvcGrpProfileHookflashSSP	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.9	SonusNameReference	read-write	The SSP which defines the protocol when a hookflash is received on an egress call
SON sonusCassgSvcGrpProfilePscSSP	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.10	SonusNameReference	read-write	The SSP which defines Permenant Signal Condition actions to perform to force a call onhook
SON sonusCassgSvcGrpProfileMaintBusy	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.11	SonusAdminState	read-write	Determines if a channel is taken offhook when it is removed from service
I32 sonusCassgSvcGrpProfileAutoBusyThreshold	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.12	Integer32	read-write	Determines the number of signaling errors which can occur before the channel is removed from service
SON sonusCassgSvcGrpProfileRequiresCPTone	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.13	SonusAdminState	read-write	Determines if ingress calls require call progress tones
SON sonusCassgSvcGrpProfileProvidesCPTone	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.14	SonusAdminState	read-write	Determines if the far end switch will provide call progress tones
SON sonusCassgSvcGrpProfileDTMFProfileName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.15	SonusNameReference	read-write	Name reference to DTMF collection/generation profile
SON sonusCassgSvcGrpProfileMFProfileName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.16	SonusNameReference	read-write	Name reference to MF collection/generation profile
SON sonusCassgSvcGrpProfileCPTonePkgName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.17	SonusNameReference	read-write	Name reference to Call Progress tone package
I32 sonusCassgSvcGrpProfileMinRxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.18	Integer32	read-write	Minimum duration for a receive wink event
I32 sonusCassgSvcGrpProfileMaxRxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.19	Integer32	read-write	Maximum duration for a receive wink event
I32 sonusCassgSvcGrpProfileMinRxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.20	Integer32	read-write	Minimum duration for a receive flash event
I32 sonusCassgSvcGrpProfileMaxRxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.21	Integer32	read-write	Maximum duration for a receive flash event
I32 sonusCassgSvcGrpProfileTxWinkTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.22	Integer32	read-write	Duration for a transmit wink
I32 sonusCassgSvcGrpProfileTxFlashTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.23	Integer32	read-write	Duration for a transmit flash
I32 sonusCassgSvcGrpProfileGuardTime	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.24	Integer32	read-write	Duration for the line to clear after disconnect
SON sonusCassgSvcGrpProfileAdminState	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.25	SonusAdminState	read-write	The admin state of the CAS Service Group
SON sonusCassgSvcGrpProfileAlertToneName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.26	SonusNameReference	read-write	Specifies a named reference to a tone to play for ring back
ROW sonusCassgSvcGrpProfileRowStatus	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.27	RowStatus	read-write
SON sonusCassgSvcGrpProfileDTProfileName	1.3.6.1.4.1.2879.2.6.5.1.2.2.1.28	SonusNameReference	read-write	Name reference to Disconnect Treatment profile
sonusCasChannelAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.3		not-accessible
sonusCasChannelAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.3.1		not-accessible
I32 sonusCassgChannelServiceIndex	1.3.6.1.4.1.2879.2.6.5.1.3.1.1	Integer32	read-only	The index of the CAS Service Group in which the channel is contained
I32 sonusCassgChannelShelfIndex	1.3.6.1.4.1.2879.2.6.5.1.3.1.2	Integer32	read-only	The shelf in which the channel is contained
I32 sonusCassgChannelSlotIndex	1.3.6.1.4.1.2879.2.6.5.1.3.1.3	Integer32	read-only	The slot in which the channel is contained
I32 sonusCassgChannelPortIndex	1.3.6.1.4.1.2879.2.6.5.1.3.1.4	Integer32	read-only	The port in which the channel is contained
I32 sonusCassgChannelDs3Index	1.3.6.1.4.1.2879.2.6.5.1.3.1.5	Integer32	read-only	The DS3 in which the channel is contained
I32 sonusCassgChannelDs1Index	1.3.6.1.4.1.2879.2.6.5.1.3.1.6	Integer32	read-only	The DS1 in which the channel is contained
I32 sonusCassgChannelIndex	1.3.6.1.4.1.2879.2.6.5.1.3.1.7	Integer32	read-only	The relative channel number within the port
SON sonusCassgChannelCircuitProfileName	1.3.6.1.4.1.2879.2.6.5.1.3.1.8	SonusNameReference	read-write	Name reference to the circuit profile
INT sonusCassgChannelDirection	1.3.6.1.4.1.2879.2.6.5.1.3.1.9	INTEGER	read-write	Direction of call traffic allowed on the channel
SON sonusCassgChannelMode	1.3.6.1.4.1.2879.2.6.5.1.3.1.10	SonusServiceState	read-write	The mode of operation of the channel
SON sonusCassgChannelAction	1.3.6.1.4.1.2879.2.6.5.1.3.1.11	SonusAdminAction	read-write	The action taken on the channel
I32 sonusCassgChannelTimeout	1.3.6.1.4.1.2879.2.6.5.1.3.1.12	Integer32	read-write	The timeout in minutes for dryup action on the channel
SON sonusCassgChannelAdminState	1.3.6.1.4.1.2879.2.6.5.1.3.1.13	SonusAdminState	read-write	The administrative state of the object. The object must be disabled in order to modify other objects in this row.
ROW sonusCassgChannelRowStatus	1.3.6.1.4.1.2879.2.6.5.1.3.1.14	RowStatus	read-write
sonusCasChannelStatTable	1.3.6.1.4.1.2879.2.6.5.1.4		not-accessible
sonusCasChannelStatEntry	1.3.6.1.4.1.2879.2.6.5.1.4.1		not-accessible
I32 sonusCassgChannelStatServiceIndex	1.3.6.1.4.1.2879.2.6.5.1.4.1.1	Integer32	read-only	The index of the CAS Service Group in which the channel is contained
I32 sonusCassgChannelStatShelfIndex	1.3.6.1.4.1.2879.2.6.5.1.4.1.2	Integer32	read-only	The shelf in which the channel is contained
I32 sonusCassgChannelStatSlotIndex	1.3.6.1.4.1.2879.2.6.5.1.4.1.3	Integer32	read-only	The slot in which the channel is contained
I32 sonusCassgChannelStatPortIndex	1.3.6.1.4.1.2879.2.6.5.1.4.1.4	Integer32	read-only	The port in which the channel is contained
I32 sonusCassgChannelStatIndex	1.3.6.1.4.1.2879.2.6.5.1.4.1.5	Integer32	read-only	The relative channel number within the por
INT sonusCassgChannelStatUsage	1.3.6.1.4.1.2879.2.6.5.1.4.1.6	INTEGER	read-only	The usage state of the channel
INT sonusCassgChannelStatLocalMaint	1.3.6.1.4.1.2879.2.6.5.1.4.1.7	INTEGER	read-only	The local maintenance state of the channel
INT sonusCassgChannelStatLocalHw	1.3.6.1.4.1.2879.2.6.5.1.4.1.8	INTEGER	read-only	The local hardware state of the channel
INT sonusCassgChannelStatRemoteMaint	1.3.6.1.4.1.2879.2.6.5.1.4.1.9	INTEGER	read-only	The remote status of the channel
I32 sonusCassgChannelStatIngressAttempts	1.3.6.1.4.1.2879.2.6.5.1.4.1.10	Integer32	read-only	The number of incoming call attempts
I32 sonusCassgChannelStatIngressFailures	1.3.6.1.4.1.2879.2.6.5.1.4.1.11	Integer32	read-only	The number of incoming call failures
I32 sonusCassgChannelStatEgressAttempts	1.3.6.1.4.1.2879.2.6.5.1.4.1.12	Integer32	read-only	The number of outgoing call attempts
I32 sonusCassgChannelStatEgressFailures	1.3.6.1.4.1.2879.2.6.5.1.4.1.13	Integer32	read-only	The number of outgoing call failures
I32 sonusCassgChannelStatMakeBusyFailures	1.3.6.1.4.1.2879.2.6.5.1.4.1.14	Integer32	read-only	The number of failures which are considered in the auto busy threshold processing
I32 sonusCassgChannelStatIngressCompletions	1.3.6.1.4.1.2879.2.6.5.1.4.1.15	Integer32	read-only	The number of incoming calls which have completed the Ingress SSP
I32 sonusCassgChannelStatEgressCompletions	1.3.6.1.4.1.2879.2.6.5.1.4.1.16	Integer32	read-only	The number of outgoing calls which have completed the Egress SSP
sonusCasCollectionProfileAdmn	1.3.6.1.4.1.2879.2.6.5.1.5
I32 sonusCasCollectionProfileNextIndex	1.3.6.1.4.1.2879.2.6.5.1.5.1	Integer32	read-only	The next valid index to use when creating a new sonusCasCollectionProfileAdmnEntry
sonusCasCollectionProfileAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.5.2		not-accessible
sonusCasCollectionProfileAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.5.2.1		not-accessible
I32 sonusCassgCollectProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.1	Integer32	read-only	The index of the collection profile
SON sonusCassgCollectProfileName	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.2	SonusName	read-write	The name of the collection profile
INT sonusCassgCollectProfileCollectId	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.3	INTEGER	read-write	Identifies the collection and where to store digits
INT sonusCassgCollectProfileCollectType	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.4	INTEGER	read-write	Type of digits to be collected
I32 sonusCassgCollectProfileMinDigits	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.5	Integer32	read-write	Minimum number of digits to collect
I32 sonusCassgCollectProfileMaxDigits	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.6	Integer32	read-write	Maximum number of digits to collect
I32 sonusCassgCollectProfileFirstDigitTime	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.7	Integer32	read-write	Duration in milliseconds to allow for the first digit
I32 sonusCassgCollectProfileInterDigitTime	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.8	Integer32	read-write	Duration in milliseconds allowed between digits
I32 sonusCassgCollectProfileFieldTime	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.9	Integer32	read-write	The duration in milliseconds allowed for the complete collection
INT sonusCassgCollectProfileTermDigit	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.10	INTEGER	read-write	Specifies a digit to terminate a DTMF collection
STR sonusCassgCollectProfileRestartDigit	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.11	DisplayString	read-write	Specifies a digit sequence which will restart the collection and announcement prompt
STR sonusCassgCollectProfileReinputDigit	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.12	DisplayString	read-write	Specifies a digit sequence which will restart the collection but not the announcement
I32 sonusCassgCollectProfileReportDigits	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.13	Integer32	read-write
SON sonusCassgCollectProfileFirstDigitQuiet	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.14	SonusAdminState	read-write	Determines if announcement should be terminated when the first digit is entered
I32 sonusCassgCollectProfileAnnouncementPrompt	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.15	Integer32	read-write	Numeric identifier for the announcement
STR sonusCassgCollectProfileTonePrompt	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.16	DisplayString	read-write	Named reference to the tone prompt
ROW sonusCassgCollectProfileRowStatus	1.3.6.1.4.1.2879.2.6.5.1.5.2.1.17	RowStatus	read-write
sonusCasSspGroupAdmn	1.3.6.1.4.1.2879.2.6.5.1.6
I32 sonusCasSspNextIndex	1.3.6.1.4.1.2879.2.6.5.1.6.1	Integer32	read-only	The next valid index to use when creating a new sonusCasSspGroupAdmnEntry
sonusCasSspAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.6.2		not-accessible
sonusCasSspAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.6.2.1		not-accessible
I32 sonusCassgSigSeqProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.6.2.1.1	Integer32	read-only	The index of the SSP
SON sonusCassgSigSeqProfileName	1.3.6.1.4.1.2879.2.6.5.1.6.2.1.2	SonusName	read-write	Name of the SSP
ROW sonusCassgSigSeqProfileRowStatus	1.3.6.1.4.1.2879.2.6.5.1.6.2.1.3	RowStatus	read-write
sonusCasSignalSeqAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.7		not-accessible
sonusCasSignalSeqAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.7.1		not-accessible
I32 sonusCassgSigSequenceProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.7.1.1	Integer32	read-only	Index of SSP in which the Signal Sequence is contained
I32 sonusCassgSigSequenceIndex	1.3.6.1.4.1.2879.2.6.5.1.7.1.2	Integer32	read-only	Index of the Signal Sequence
I32 sonusCassgSigSequencePosition	1.3.6.1.4.1.2879.2.6.5.1.7.1.3	Integer32	read-write	Relative position of the Signal Sequence
INT sonusCassgSigSequenceToken	1.3.6.1.4.1.2879.2.6.5.1.7.1.4	INTEGER	read-write	Signaling action to perform
STR sonusCassgSigSequenceParam1	1.3.6.1.4.1.2879.2.6.5.1.7.1.5	DisplayString	read-write	First general parameter field specific to the signaling token
STR sonusCassgSigSequenceParam2	1.3.6.1.4.1.2879.2.6.5.1.7.1.6	DisplayString	read-write	Second general parameter field specific to the signaling token
SON sonusCassgSigSequenceSigCondProfileName	1.3.6.1.4.1.2879.2.6.5.1.7.1.7	SonusNameReference	read-write	Name reference to SCP to execute when an error occurs
SON sonusCassgSigSequenceAdminState	1.3.6.1.4.1.2879.2.6.5.1.7.1.8	SonusAdminState	read-write	Admin state of the Signal Sequence
ROW sonusCassgSigSequenceRowStatus	1.3.6.1.4.1.2879.2.6.5.1.7.1.9	RowStatus	read-write
sonusCasScpAdmn	1.3.6.1.4.1.2879.2.6.5.1.8
I32 sonusCasScpNextIndex	1.3.6.1.4.1.2879.2.6.5.1.8.1	Integer32	read-only	The next valid index to use when creating a new sonusCasScpAdmnEntry
sonusCasScpAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.8.2		not-accessible
sonusCasScpAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.8.2.1		not-accessible
I32 sonusCassgSigCondProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.8.2.1.1	Integer32	read-only	The index of the SCP
SON sonusCassgSigCondProfileName	1.3.6.1.4.1.2879.2.6.5.1.8.2.1.2	SonusName	read-write	Name of the SCP
ROW sonusCassgSigCondProfileRowStatus	1.3.6.1.4.1.2879.2.6.5.1.8.2.1.3	RowStatus	read-write
sonusCasSignalCondAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.8.3		not-accessible
sonusCasSignalCondAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.8.3.1		not-accessible
I32 sonusCassgSigConditionProfileIndex	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.1	Integer32	read-only	Index of the SCP in which the Signal Condition is contained
I32 sonusCassgSigConditionIndex	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.2	Integer32	read-only	Index of the Signal Condition
INT sonusCassgSigConditionToken	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.3	INTEGER	read-write	Token which defines error condition which occurred
INT sonusCassgSigConditionControl	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.4	INTEGER	read-write	Defines how processing of the SSP should continue
STR sonusCassgSigConditionParam	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.5	DisplayString	read-write	General parameter for Signal Condition specific to token and control
SON sonusCassgSigConditionAdminState	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.6	SonusAdminState	read-write	The admin state of the Signal Condition
ROW sonusCassgSigConditionRowStatus	1.3.6.1.4.1.2879.2.6.5.1.8.3.1.7	RowStatus	read-write
sonusCasDisconnectTreatAdmnTable	1.3.6.1.4.1.2879.2.6.5.1.9		not-accessible
sonusCasDisconnectTreatAdmnEntry	1.3.6.1.4.1.2879.2.6.5.1.9.1		not-accessible
I32 sonusCassgDiscTreatmentIndex	1.3.6.1.4.1.2879.2.6.5.1.9.1.1	Integer32	read-only
I32 sonusCassgDiscTreatmentReason	1.3.6.1.4.1.2879.2.6.5.1.9.1.2	Integer32	read-only
SON sonusCassgDiscTreatmentSigSeqProfileName	1.3.6.1.4.1.2879.2.6.5.1.9.1.3	SonusNameReference	read-write
ROW sonusCassgDiscTreatmentRowStatus	1.3.6.1.4.1.2879.2.6.5.1.9.1.4	RowStatus	read-write
sonusCasServiceGroupMIBNotifications	1.3.6.1.4.1.2879.2.6.5.1.10
sonusCasServiceGroupMIBNotificationsPrefix	1.3.6.1.4.1.2879.2.6.5.1.10.0
NTF sonusCasSvcGrpInServiceNotification	1.3.6.1.4.1.2879.2.6.5.1.10.0.1			This trap indicates that the CAS Service Group was put in service by maintenance staff.
NTF sonusCasSvcGrpOutOfServiceNotification	1.3.6.1.4.1.2879.2.6.5.1.10.0.2			This trap indicates that the CAS Service Group was taken out of service by maintenance staff.
NTF sonusCasChannelInServiceNotification	1.3.6.1.4.1.2879.2.6.5.1.10.0.3			This trap indicates that a CAS channel was put in service by CAS.
NTF sonusCasChannelOutOfServiceNotification	1.3.6.1.4.1.2879.2.6.5.1.10.0.4			This trap indicates that a channel was taken out of service by the CAS SG due to signaling errors exceeding a configured threshold.
sonusCasServiceGroupMIBNotificationsObjects	1.3.6.1.4.1.2879.2.6.5.1.10.1
STR sonusCasSvcGrpName	1.3.6.1.4.1.2879.2.6.5.1.10.1.1	DisplayString	read-only	Name of the CAS service group.

RFC description

CAS (Channel Associated Signaling) service group management for Sonus Networks signaling platforms. Manages service groups, trunks, and hunt algorithms.

Start monitoring Sonus Networks softswitch/media gateway (CAS trunk signaling configuration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONUS-CAS-MIB

What Is SONUS-CAS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description