All MIBs › SONUS-NODE-RESOURCES-MIB › sonusDigitProfileDetFreqAcceptRange
sonusDigitProfileDetFreqAcceptRange
Module: SONUS-NODE-RESOURCES-MIB
OID (symbolic): SONUS-NODE-RESOURCES-MIB::sonusDigitProfileDetFreqAcceptRange
OID (numeric): 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digits the value represents only the accept range. Frequencies detected within the accept range will result in digit detection. Frequencies detected outside the reject range will not result in digit detection. . DTMF DTMF MFR1 VALUE ENUMERATION ACCEPT REJECT ACCEPT ----- ----------- ---------------- ------------------ 1 narrow +/-2.0% +/-3.0% +/-(1.5% + 5Hz) 2 medium +/-2.5% +/-3.5% +/-(1.5% + 10Hz) 3 wide +/-3.0% +/-4.0% +/-(1.5% + 15Hz) 4 wider +/-3.5% +/-4.5% N/A
What is sonusDigitProfileDetFreqAcceptRange?
Sets how tightly this profile's digit detector must match the expected tone frequencies - narrow(1) through wider(4), default medium(2) - trading off false-rejection of slightly off-frequency legitimate digits against false-acceptance of noise; the object's DESCRIPTION gives the precise accept/reject percentage tolerances for DTMF and the accept tolerance for MFR1 at each setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10 snmpwalk -v2c -c public <target> SONUS-NODE-RESOURCES-MIB::sonusDigitProfileDetFreqAcceptRange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10.1 snmpget -v2c -c public <target> SONUS-NODE-RESOURCES-MIB::sonusDigitProfileDetFreqAcceptRange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10.1 i <value>
Start monitoring Sonus Networks (Ribbon Communications) softswitches/media gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONUS-NODE-RESOURCES-MIB::sonusDigitProfileDetFreqAcceptRange OID value, configure state conditions and alerts, and monitor any Sonus Networks (Ribbon Communications) softswitches/media gateways from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2879 | sonus | SONUS-SMI |
| 1.3.6.1.4.1.2879.2 | sonusMgmt | SONUS-SMI |
| 1.3.6.1.4.1.2879.2.2 | sonusResourcesMIBs | SONUS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2879.2.2.2 | sonusNodeResourcesMIB | SONUS-NODE-RESOURCES-MIB |
| 1.3.6.1.4.1.2879.2.2.2.1 | sonusNodeResourcesMIBObjects | SONUS-NODE-RESOURCES-MIB |
| 1.3.6.1.4.1.2879.2.2.2.1.7 | sonusDigitProfile | SONUS-NODE-RESOURCES-MIB |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2 | sonusDigitProfileTable | SONUS-NODE-RESOURCES-MIB |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1 | sonusDigitProfileEntry | SONUS-NODE-RESOURCES-MIB |
| 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10 | sonusDigitProfileDetFreqAcceptRange | SONUS-NODE-RESOURCES-MIB |