SONUS-NODE-RESOURCES-MIB :: sonusCktServProfileCttTestType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SONUS-NODE-RESOURCES-MIB › sonusCktServProfileCttTestType

sonusCktServProfileCttTestType

Module: SONUS-NODE-RESOURCES-MIB

OID (symbolic): SONUS-NODE-RESOURCES-MIB::sonusCktServProfileCttTestType

OID (numeric): 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.

What is sonusCktServProfileCttTestType?

Selects the ISUP continuity test mode for this circuit service profile - remoteLoopback (default, the remote switch loops the tested channel back), remote2Wire, or remote4Wire - matching whatever continuity-test procedure the far-end switch or trunk supports.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7
snmpwalk -v2c -c public <target> SONUS-NODE-RESOURCES-MIB::sonusCktServProfileCttTestType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7.1
snmpget -v2c -c public <target> SONUS-NODE-RESOURCES-MIB::sonusCktServProfileCttTestType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7.1 i <value>

Start monitoring Sonus Networks (Ribbon Communications) softswitches/media gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONUS-NODE-RESOURCES-MIB::sonusCktServProfileCttTestType OID value, configure state conditions and alerts, and monitor any Sonus Networks (Ribbon Communications) softswitches/media gateways from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2879sonusSONUS-SMI
1.3.6.1.4.1.2879.2sonusMgmtSONUS-SMI
1.3.6.1.4.1.2879.2.2sonusResourcesMIBsSONUS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2879.2.2.2sonusNodeResourcesMIBSONUS-NODE-RESOURCES-MIB
1.3.6.1.4.1.2879.2.2.2.1sonusNodeResourcesMIBObjectsSONUS-NODE-RESOURCES-MIB
1.3.6.1.4.1.2879.2.2.2.1.12sonusCktServProfileSONUS-NODE-RESOURCES-MIB
1.3.6.1.4.1.2879.2.2.2.1.12.2sonusCktServProfileTableSONUS-NODE-RESOURCES-MIB
1.3.6.1.4.1.2879.2.2.2.1.12.2.1sonusCktServProfileEntrySONUS-NODE-RESOURCES-MIB
1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7sonusCktServProfileCttTestTypeSONUS-NODE-RESOURCES-MIB