All MIBs › SNI-NT-CLUSTER-MIB
Category: Server and Host Management, Siemens Nixdorf Server Management
Description: Manages Siemens Nixdorf Windows NT cluster node status, resource groups, and failover configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SNI-NT-CLUSTER-MIB?
SNI-NT-CLUSTER-MIB is a Siemens Nixdorf (later Fujitsu Siemens) enterprise MIB for monitoring Microsoft Cluster Server (MSCS)-based Windows NT server clusters running on SNI server hardware. It exposes cluster identity and version data along with the operational state of the cluster service itself, plus quorum-resource identification used to determine which node currently owns the cluster. Its monitoring focus is software/service availability of the cluster: sniWpAgentClusterServiceState reveals whether the cluster service on a node is running, stopped, or in an error state, and the quorum-resource fields let an admin confirm which physical resource is acting as the tie-breaker, both critical for diagnosing a failover or split-brain condition. It depends on the underlying Microsoft Cluster Server architecture for the concepts it surfaces, translated into an SNI-proprietary MIB rather than a Microsoft-standard one. It was deployed on Siemens Nixdorf/Fujitsu Siemens Windows NT server clusters in enterprise environments requiring high-availability failover, where SNI-NT-CLUSTER-MIB SNMP monitoring supplemented native Windows cluster administration tools with visibility into cluster health.
IPNetwork Monitor allows you to monitor SNMP objects defined in SNI-NT-CLUSTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Siemens Nixdorf / Fujitsu Siemens Windows NT server cluster node
Monitoring Examples
An admin would poll sniWpAgentClusterServiceState on each node to confirm the cluster service is running before assuming automatic failover will work, and check sniWpClusterQuorumResourceName/sniWpClusterQuorumResourceDevice to verify the quorum disk resource is correctly identified. A node reporting a non-running cluster service state while its peer is healthy would indicate that node has dropped out of the cluster and needs investigation.
What Can Be Monitored
- cluster service operational state
- quorum resource identity
- cluster name/version/build
- agent version
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| mib-2 |
From SNI-TRAP-MIB
| sniServerName | OBJECT-TYPE |
| sniTrapTime | OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sni | 1.3.6.1.4.1.231 | |||
| NTF sniWpChangeUnknown | 1.3.6.1.4.1.231.0.801 | The cluster API has returned a notification type for which no other trap is currently defined. | ||
| NTF sniWpChangeClusterNotFoundActive | 1.3.6.1.4.1.231.0.810 | The SNMP agent started but could not communicate with the cluster service. | ||
| NTF sniWpChangeClusterActiveAgain | 1.3.6.1.4.1.231.0.811 | The SNMP agent has established communication with the cluster service. | ||
| NTF sniWpChangeClusterNoLongerActive | 1.3.6.1.4.1.231.0.812 | The SNMP agent has lost communication with the cluster service. | ||
| NTF sniWpChangeNodeDeleted | 1.3.6.1.4.1.231.0.830 | A node has permanently been removed from the cluster. | ||
| NTF sniWpChangeNodeAdded | 1.3.6.1.4.1.231.0.831 | A new node has been added to the cluster. | ||
| NTF sniWpChangeNodeState | 1.3.6.1.4.1.231.0.832 | A cluster node has changed its state. | ||
| NTF sniWpChangeResourceTypeDeleted | 1.3.6.1.4.1.231.0.840 | A resource type has been deleted. | ||
| NTF sniWpChangeResourceTypeAdded | 1.3.6.1.4.1.231.0.841 | A new resource type has been created. | ||
| NTF sniWpChangeGroupDeleted | 1.3.6.1.4.1.231.0.850 | A resource group has been deleted. | ||
| NTF sniWpChangeGroupAdded | 1.3.6.1.4.1.231.0.851 | A new resource group has been created. | ||
| NTF sniWpChangeGroupState | 1.3.6.1.4.1.231.0.852 | A resource group has changed its state. | ||
| NTF sniWpChangeGroupProperty | 1.3.6.1.4.1.231.0.853 | The properties of a resource group have changed. | ||
| NTF sniWpChangeResourceDeleted | 1.3.6.1.4.1.231.0.860 | A cluster resource has been deleted. | ||
| NTF sniWpChangeResourceAdded | 1.3.6.1.4.1.231.0.861 | A new resource has been created in the cluster. | ||
| NTF sniWpChangeResourceState | 1.3.6.1.4.1.231.0.862 | A cluster resource has changed its state. | ||
| NTF sniWpChangeResourceProperty | 1.3.6.1.4.1.231.0.863 | The properties of a cluster resource have changed. | ||
| NTF sniWpChangeRegistryAttributes | 1.3.6.1.4.1.231.0.895 | The cluster registry key's attributes have been changed. | ||
| NTF sniWpChangeRegistryKey | 1.3.6.1.4.1.231.0.896 | A cluster registry key has been created or deleted. | ||
| NTF sniWpChangeRegistryValue | 1.3.6.1.4.1.231.0.897 | A cluster registry value has been changed or deleted. | ||
| NTF sniWpChangeNetworkDeleted | 1.3.6.1.4.1.231.0.910 | A network has been removed from the cluster. | ||
| NTF sniWpChangeNetworkAdded | 1.3.6.1.4.1.231.0.911 | A network has been added to the cluster. | ||
| NTF sniWpChangeNetworkState | 1.3.6.1.4.1.231.0.912 | A Network has changed its state. | ||
| NTF sniWpChangeNetworkProperty | 1.3.6.1.4.1.231.0.913 | The properties of a network have changed. | ||
| NTF sniWpChangeNetInterfaceDeleted | 1.3.6.1.4.1.231.0.920 | A network interface has been deleted. | ||
| NTF sniWpChangeNetInterfaceAdded | 1.3.6.1.4.1.231.0.921 | A new network interface has been created. | ||
| NTF sniWpChangeNetInterfaceState | 1.3.6.1.4.1.231.0.922 | A network interface has changed its state. | ||
| NTF sniWpChangeNetInterfaceProperty | 1.3.6.1.4.1.231.0.923 | The properties of a network interface have changed. | ||
| NTF sniWpNodeUp | 1.3.6.1.4.1.231.0.924 | A cluster node is online. | ||
| NTF sniWpNodeDown | 1.3.6.1.4.1.231.0.925 | A cluster node is offline. | ||
| NTF sniWpNodePaused | 1.3.6.1.4.1.231.0.926 | A cluster node has been paused. | ||
| NTF sniWpNodeJoining | 1.3.6.1.4.1.231.0.927 | A cluster node is joining. | ||
| NTF sniWpGroupOnline | 1.3.6.1.4.1.231.0.928 | A resource group has changed its state to online. | ||
| NTF sniWpGroupPartialOnline | 1.3.6.1.4.1.231.0.929 | A cluster resource group has changed its state to partially online. | ||
| NTF sniWpGroupPending | 1.3.6.1.4.1.231.0.930 | A cluster resource group has changed its state to pending. | ||
| NTF sniWpGroupOffline | 1.3.6.1.4.1.231.0.931 | A cluster resource group has changed its state to offline. | ||
| NTF sniWpGroupFailed | 1.3.6.1.4.1.231.0.932 | A cluster resource group has failed. | ||
| NTF sniWpResourceOnline | 1.3.6.1.4.1.231.0.933 | A cluster resource has changed its state to online. | ||
| NTF sniWpResourceOffline | 1.3.6.1.4.1.231.0.934 | A cluster resource has changed its state to offline. | ||
| NTF sniWpResourceFailed | 1.3.6.1.4.1.231.0.935 | A cluster resource has failed. | ||
| NTF sniWpNetworkUp | 1.3.6.1.4.1.231.0.936 | A cluster network was reactivated. | ||
| NTF sniWpNetworkDown | 1.3.6.1.4.1.231.0.937 | A cluster network was going down. | ||
| NTF sniWpNetworkUnavailable | 1.3.6.1.4.1.231.0.938 | A cluster network is unavailable. | ||
| NTF sniWpNetInterfaceUp | 1.3.6.1.4.1.231.0.939 | A cluster network interface was reactivated. | ||
| NTF sniWpNetInterfaceFailed | 1.3.6.1.4.1.231.0.940 | A cluster network interface has failed. | ||
| NTF sniWpNetInterfaceUnreachable | 1.3.6.1.4.1.231.0.941 | A cluster network interface is unreachable. | ||
| NTF sniWpNetInterfaceUnavailable | 1.3.6.1.4.1.231.0.942 | A cluster network interface is unavailable. | ||
| sniProductMibs | 1.3.6.1.4.1.231.2 | |||
| sniExtensions | 1.3.6.1.4.1.231.2.10 | |||
| sniServerMgmt | 1.3.6.1.4.1.231.2.10.2 | |||
| sniCluster | 1.3.6.1.4.1.231.2.10.2.9 | |||
| sniNtCluster | 1.3.6.1.4.1.231.2.10.2.9.1 | |||
| sniWpAgent | 1.3.6.1.4.1.231.2.10.2.9.1.1 | |||
| INT sniWpAgentVersionMajor | 1.3.6.1.4.1.231.2.10.2.9.1.1.1 | INTEGER | read-only | Major version number of the MIB |
| INT sniWpAgentVersionMinor | 1.3.6.1.4.1.231.2.10.2.9.1.1.2 | INTEGER | read-only | Minor version number of the MIB |
| STR sniWpAgentVersionString | 1.3.6.1.4.1.231.2.10.2.9.1.1.3 | DisplayString | read-only | MIB's version string . (e.g. 1.23) |
| INT sniWpAgentClusterServiceState | 1.3.6.1.4.1.231.2.10.2.9.1.1.4 | INTEGER | read-only | Status of the communication with the cluster service: 1 - unknown, 2 - normal operation, 3 - not fully operational, data in the other groups of this MIB are unsignificant. |
| sniWpCluster | 1.3.6.1.4.1.231.2.10.2.9.1.2 | |||
| STR sniWpClusterName | 1.3.6.1.4.1.231.2.10.2.9.1.2.1 | DisplayString | read-only | Cluster name. |
| INT sniWpClusterVersionMajor | 1.3.6.1.4.1.231.2.10.2.9.1.2.2 | INTEGER | read-only | Cluster service version (major). |
| INT sniWpClusterVersionMinor | 1.3.6.1.4.1.231.2.10.2.9.1.2.3 | INTEGER | read-only | Cluster service version (minor). |
| INT sniWpClusterBuildNumber | 1.3.6.1.4.1.231.2.10.2.9.1.2.4 | INTEGER | read-only | Cluster service build number. |
| STR sniWpClusterVendorId | 1.3.6.1.4.1.231.2.10.2.9.1.2.5 | DisplayString | read-only | Cluster vendor name. |
| STR sniWpClusterCSDVersion | 1.3.6.1.4.1.231.2.10.2.9.1.2.6 | DisplayString | read-only | Cluster service pack. |
| STR sniWpClusterQuorumResourceName | 1.3.6.1.4.1.231.2.10.2.9.1.2.7 | DisplayString | read-only | Cluster quorum resource name. |
| STR sniWpClusterQuorumResourceDevice | 1.3.6.1.4.1.231.2.10.2.9.1.2.8 | DisplayString | read-only | Cluster quorum resource device. |
| INT sniWpClusterQuorumResourceMaxLog | 1.3.6.1.4.1.231.2.10.2.9.1.2.9 | INTEGER | read-only | Cluster quorum resource maximum log size. |
| STR sniWpClusterIPAddress | 1.3.6.1.4.1.231.2.10.2.9.1.2.10 | DisplayString | read-only | Cluster IP address. |
| sniWpNodes | 1.3.6.1.4.1.231.2.10.2.9.1.3 | |||
| INT sniWpNodeNumber | 1.3.6.1.4.1.231.2.10.2.9.1.3.1 | INTEGER | read-only | Number of nodes in the cluster, and of sniWpNodeTable entries. |
| sniWpNodeTable | 1.3.6.1.4.1.231.2.10.2.9.1.3.2 | not-accessible | Table of cluster nodes. | |
| sniWpNodeEntry | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1 | not-accessible | ||
| INT sniWpNodeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.1 | INTEGER | read-only | Temporary index of the node (1-based sequence). |
| STR sniWpNodeName | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.2 | DisplayString | read-only | Name which identifies the node. |
| INT sniWpNodeState | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.3 | INTEGER | read-only | State of the node: 1 - the state of the node cannot be determined, or is none of the following: 2 - node is up and running, 3 - node is down, 4 - node has suspended cluster activity, 5 - node is resuming cluster activity, but is not yet ready. |
| STR sniWpNodeDescription | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.4 | DisplayString | read-only | Remarks or comments about the node. |
| IP sniWpNodeIpAddress | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.5 | IpAddress | read-only | IP address of cluster node. |
| IP sniWpNodeIpAddress2 | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.6 | IpAddress | read-only | Optional second IP address of the cluster node. |
| IP sniWpNodeIpAddress3 | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.7 | IpAddress | read-only | Optional third IP address of the cluster node. |
| IP sniWpNodeIpAddress4 | 1.3.6.1.4.1.231.2.10.2.9.1.3.2.1.8 | IpAddress | read-only | Optional fourth IP address of the cluster node. |
| sniWpResourceTypes | 1.3.6.1.4.1.231.2.10.2.9.1.4 | |||
| INT sniWpResourceTypeNumber | 1.3.6.1.4.1.231.2.10.2.9.1.4.1 | INTEGER | read-only | Number of resource types. |
| sniWpResourceTypeTable | 1.3.6.1.4.1.231.2.10.2.9.1.4.2 | not-accessible | Table of resource types. | |
| sniWpResourceTypeEntry | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1 | not-accessible | ||
| INT sniWpResourceTypeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.1 | INTEGER | read-only | Temporary index of the resource type (1-based sequence). |
| STR sniWpResourceTypeName | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.2 | DisplayString | read-only | Unique name of the type of resources |
| STR sniWpResourceTypeAdminExtensions | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.3 | DisplayString | read-only | CLSIDs of the Cluster Administrator extension DLLs for this resource type. |
| INT sniWpResourceTypeDebugControlFunctions | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.4 | INTEGER | read-only | Indicates whether or not the Cluster Service should create a separate Resource Monitor to use for debugging the control functions of the resource type: 1 - don't know 2 - yes 3 - no. |
| STR sniWpResourceTypeDebugPrefix | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.5 | DisplayString | read-only | Path to a debugger that will be used to debug all resources of the type that are running in the Resource Monitor for the resource type. |
| STR sniWpResourceTypeDescription | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.6 | DisplayString | read-only | Remarks or comments about the resource type. |
| STR sniWpResourceTypeDllName | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.7 | DisplayString | read-only | Name of the DLL that implements the resource type. |
| INT sniWpResourceTypeIsAlivePollInterval | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.8 | INTEGER | read-only | Recommended interval in milliseconds that the Cluster Service should poll resources of this type to determine if they are operational. |
| INT sniWpResourceTypeLooksAlivePollInterval | 1.3.6.1.4.1.231.2.10.2.9.1.4.2.1.9 | INTEGER | read-only | Recommended interval in milliseconds that the Cluster Service should poll resources of this type to determine if they appear operational. |
| sniWpGroups | 1.3.6.1.4.1.231.2.10.2.9.1.5 | |||
| INT sniWpGroupNumber | 1.3.6.1.4.1.231.2.10.2.9.1.5.1 | INTEGER | read-only | Number of resource groups. |
| sniWpGroupTable | 1.3.6.1.4.1.231.2.10.2.9.1.5.2 | not-accessible | Table of resource groups. | |
| sniWpGroupEntry | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1 | not-accessible | ||
| INT sniWpGroupIndex | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.1 | INTEGER | read-only | Temporary index of the group of resources (1-based sequence). |
| STR sniWpGroupName | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.2 | DisplayString | read-only | Name which identifies the group of resources. |
| INT sniWpGroupState | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.3 | INTEGER | read-only | State of the group of resources: 1 - the state of the group cannot be determined, or is none of the following: 2 - the group is on-line, 3 - the group is off-line, 4 - the group is partially on-line, 5 - the group has failed, 6 - the group is unavailable. |
| INT sniWpGroupNodeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.4 | INTEGER | read-only | Node which currently runs the group of resources (sniWpNodeIndex value). |
| INT sniWpGroupAutoFailbackType | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.5 | INTEGER | read-only | Specifies whether or not the group should automatically be moved to the node identified as its preferred owner when that node comes back online following a failover. 1 - Don't know, 2 - yes, 3 - no. |
| STR sniWpGroupDescription | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.6 | DisplayString | read-only | Remarks or comments about the group of resources. |
| INT sniWpGroupFailbackWindowStart | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.7 | INTEGER | read-only | The earliest time that the group can be moved back to the node identified as its preferred node. -1 : no window 0 to 23 : the hour since midnight. |
| INT sniWpGroupFailbackWindowEnd | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.8 | INTEGER | read-only | The latest time that the group can be moved back to the node identified as its preferred node. -1 : no window 0 to 23 : the hour since midnight. |
| INT sniWpGroupFailoverThreshold | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.9 | INTEGER | read-only | The number of attempts at failover that are made before the Cluster Service concludes that the group cannot be brought online anywhere in the cluster. |
| INT sniWpGroupFailoverPeriod | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.10 | INTEGER | read-only | Number of hours during which the Cluster Service can attempt to failover the group of resources. |
| INT sniWpGroupPersistentState | 1.3.6.1.4.1.231.2.10.2.9.1.5.2.1.11 | INTEGER | read-only | Persistent state of the group of resources: what should be done the next time the Cluster Service is started. 1 - don't know, 2 - the group should be brought online, 3 - the group should be left offline. |
| sniWpResources | 1.3.6.1.4.1.231.2.10.2.9.1.6 | |||
| INT sniWpResourceNumber | 1.3.6.1.4.1.231.2.10.2.9.1.6.1 | INTEGER | read-only | Total number of resources. |
| sniWpResourceTable | 1.3.6.1.4.1.231.2.10.2.9.1.6.2 | not-accessible | Table of cluster resources. | |
| sniWpResourceEntry | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1 | not-accessible | ||
| INT sniWpResourceGroupIndex | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.1 | INTEGER | read-only | Temporary index of the group of the resource (same set of values as that of sniWpGroupIndex). |
| INT sniWpResourceIndex | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.2 | INTEGER | read-only | Temporary index of the resource (1-based sequence, not reset at group boundaries). |
| STR sniWpResourceName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.3 | DisplayString | read-only | Name which identifies the resource. |
| INT sniWpResourceState | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.4 | INTEGER | read-only | The state of the resource: 1 - the state of the resource cannot be determined, or is none of the following: 2 - the resource is on-line, 3 - the resource is off-line, 4 - the resource has failed, 5 - the resource is coming up, 6 - the resource is going down, 7 - the resource is pending, 8 - the resource is not available, 9 - the resource is inherited, 10 - the resource is initialising. |
| STR sniWpResourceNetworkName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.5 | DisplayString | read-only | Network name of the resource. |
| INT sniWpResourceResourceTypeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.6 | INTEGER | read-only | Temporary index of the type of the resource (same set of values as that of sniWpResourceTypeIndex). |
| STR sniWpResourceDebugPrefix | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.7 | DisplayString | read-only | Path to the debugger to be attached to the Resource Monitor for the resource. |
| STR sniWpResourceDescription | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.8 | DisplayString | read-only | Remarks or comments about the resource. |
| INT sniWpResourceIsAlivePollInterval | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.9 | INTEGER | read-only | Recommended interval in milliseconds that the Cluster Service should poll the resource to determine if it is operational. -1 : take the value from its resource type, must otherwise be > 0. |
| INT sniWpResourceLooksAlivePollInterval | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.10 | INTEGER | read-only | Recommended interval in milliseconds that the Cluster Service should poll the resource to determine if it appears operational, or -1 : take the value from its resource type, or 0 : the LooksAlive() function is not used. |
| INT sniWpResourcePendingTimeout | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.11 | INTEGER | read-only | Number of milliseconds that the Resource Monitor waits after the resource returns a status of ERROR_IO_PENDING from its Online or Offline entry point functions. |
| INT sniWpResourcePersistentState | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.12 | INTEGER | read-only | Describes what should happen to the resource the next time the Cluster Service is started: 1 - don't know, 2 - the resource should be brought online, 3 - the resource should be left offline. |
| INT sniWpResourceRestartAction | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.13 | INTEGER | read-only | Action to perform if the resource fails: 1 - don't know 2 - Do not restart the resource after a failure, 3 - If the resource exceeds its restart threshold within its restart period, do not attempt to fail the group over to another node in the cluster, 4 - If the resource exceeds its restart threshold within its restart period, attempt to fail the group over to another node in the cluster. |
| INT sniWpResourceRestartPeriod | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.14 | INTEGER | read-only | Window of time in milliseconds during which a specified number of restart attempts of the resource can occur. This number is defined by sniWpResourceRestartThreshold. |
| INT sniWpResourceRestartThreshold | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.15 | INTEGER | read-only | Limit of local retries for the resource within a window defined by sniWpResourceRestartPeriod before the Cluster Service initiates the action specified by sniWpResourceRestartAction. |
| INT sniWpResourceSeparateMonitor | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.16 | INTEGER | read-only | Indicates whether or not the resource requires its own Resource Monitor: 1 - don't know, 2 - yes, 3 - no. |
| INT sniWpFileShareResourceMaxUsers | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.17 | INTEGER | read-only | Number of simultaneous users that can access the file share. |
| STR sniWpFileShareResourcePath | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.18 | DisplayString | read-only | Path to the directory being shared. |
| STR sniWpFileShareResourceRemark | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.19 | DisplayString | read-only | Comment attached to the File Share. |
| STR sniWpFileShareResourceShareName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.21 | DisplayString | read-only | Name of the file share present on the network. |
| STR sniWpGenericApplicationResourceCommandLine | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.22 | DisplayString | read-only | Command-line used to start the application. |
| STR sniWpGenericApplicationResourceCurrentDirectory | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.23 | DisplayString | read-only | Directory in which the application should be run. |
| INT sniWpGenericApplicationResourceInteractWithDesktop | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.24 | INTEGER | read-only | Specifies whether the application can provide a user interface on the desktop that can be used by any person logged in on the node on which the resource is online: 1 - don't know, 2 - it can, 3 - it cannot. |
| INT sniWpGenericApplicationResourceUseNetworkName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.25 | INTEGER | read-only | Specifies the outcome of a call to the Win32 function GetComputerName(): 1 - don't know, 2 - network name of the Network Name resource on which the application or service is dependent, 3 - name of the node that is currently online and running the application or service. |
| STR sniWpGenericServiceResourceStartupParameters | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.26 | DisplayString | read-only | Command-line to pass to the service when it is started. |
| STR sniWpGenericServiceResourceServiceName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.27 | DisplayString | read-only | Short name of the service to run. |
| INT sniWpIISVirtualRootResourceAccessMaskExecute | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.28 | INTEGER | read-only | Specifies whether execute protection is required for the IIS Virtual Root: 1 - don't know, 2 - yes, 3 - no. |
| INT sniWpIISVirtualRootResourceAccessMaskRead | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.29 | INTEGER | read-only | Specifies whether read protection is required for the IIS Virtual Root: 1 - don't know, 2 - yes, 3 - no. |
| INT sniWpIISVirtualRootResourceAccessMaskWrite | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.30 | INTEGER | read-only | Specifies whether write protection is required for the IIS Virtual Root: 1 - don't know, 2 - yes, 3 - no. |
| STR sniWpIISVirtualRootResourceAlias | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.31 | DisplayString | read-only | Subdirectory name that clients use to access the IIS Virtual Root. |
| STR sniWpIISVirtualRootResourceDirectory | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.32 | DisplayString | read-only | Physical location of the IIS Virtual Root. |
| INT sniWpIISVirtualRootResourceServiceType | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.33 | INTEGER | read-only | Type of Web service with which the IIS Virtual Root will be used: 1 - don't know, 2 - www, 3 - ftp, 4 - gopher. |
| STR sniWpIPAddressResourceAddress | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.34 | DisplayString | read-only | The IP Address. |
| INT sniWpIPAddressResourceNetworkIndex | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.35 | INTEGER | read-only | Temporary index of the network for which the IP address is to be created (same set of values as that of sniWpNetworkIndex). |
| STR sniWpIPAddressResourceSubnetMask | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.36 | DisplayString | read-only | Subnet mask to be applied for routing for the IP address. |
| STR sniWpNetworkNameResourceName | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.37 | DisplayString | read-only | Network name resource. |
| STR sniWpPhysicalDiskResourceDrive | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.38 | DisplayString | read-only | Drive letter for the Physical Disk resource. |
| INT sniWpPhysicalDiskResourceSignature | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.39 | INTEGER | read-only | Signature for the Physical Disk resource. |
| STR sniWpPrintSpoolerResourceDefaultSpoolDirectory | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.40 | DisplayString | read-only | Name of the spooler folder for the Print Spooler resource. |
| INT sniWpPrintSpoolerResourceJobCompletionTimeout | 1.3.6.1.4.1.231.2.10.2.9.1.6.2.1.41 | INTEGER | read-only | Number of milliseconds before a pending job is deleted from the Print Spooler resource's queue. |
| sniWpPreferredNodes | 1.3.6.1.4.1.231.2.10.2.9.1.7 | |||
| INT sniWpPreferredNodeNumber | 1.3.6.1.4.1.231.2.10.2.9.1.7.1 | INTEGER | read-only | Total number of preferred node entries. |
| sniWpPreferredNodeTable | 1.3.6.1.4.1.231.2.10.2.9.1.7.2 | not-accessible | Table of preferred nodes per group of resources. | |
| sniWpPreferredNodeEntry | 1.3.6.1.4.1.231.2.10.2.9.1.7.2.1 | not-accessible | ||
| INT sniWpPreferredNodeGroupIndex | 1.3.6.1.4.1.231.2.10.2.9.1.7.2.1.1 | INTEGER | read-only | Temporary index of the group of the resource (same set of values as that of sniWpGroupIndex). |
| INT sniWpPreferredNodeRank | 1.3.6.1.4.1.231.2.10.2.9.1.7.2.1.2 | INTEGER | read-only | Preferred node has rank 1, higher rank means lesser preference. |
| INT sniWpPreferredNodeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.7.2.1.3 | INTEGER | read-only | Preferred node index (sniWpNodeIndex value). |
| sniWpResourceDependencies | 1.3.6.1.4.1.231.2.10.2.9.1.8 | |||
| INT sniWpResourceDependencyNumber | 1.3.6.1.4.1.231.2.10.2.9.1.8.1 | INTEGER | read-only | Total number of resource dependencies. |
| sniWpResourceDependencyTable | 1.3.6.1.4.1.231.2.10.2.9.1.8.2 | not-accessible | List of resource provider-dependent pairs. | |
| sniWpResourceDependencyEntry | 1.3.6.1.4.1.231.2.10.2.9.1.8.2.1 | not-accessible | One particular dependent resources pair. | |
| INT sniWpDependencyConditionGroupIndex | 1.3.6.1.4.1.231.2.10.2.9.1.8.2.1.1 | INTEGER | read-only | dependent resource group index (same set of values as that of sniWpGroupIndex ). |
| INT sniWpDependencyConditionResourceIndex | 1.3.6.1.4.1.231.2.10.2.9.1.8.2.1.2 | INTEGER | read-only | dependent resource index (same set of values as that of sniWpResourceIndex). |
| INT sniWpDependencyDependentGroupIndex | 1.3.6.1.4.1.231.2.10.2.9.1.8.2.1.3 | INTEGER | read-only | dependent resource group index (some value from the set of sniWpGroupIndex values). |
| INT sniWpDependencyDependentResourceIndex | 1.3.6.1.4.1.231.2.10.2.9.1.8.2.1.4 | INTEGER | read-only | dependent resource index (some value from the set of sniWpResourceIndex values). |
| sniWpNotifications | 1.3.6.1.4.1.231.2.10.2.9.1.10 | |||
| INT sniWpNotificationType | 1.3.6.1.4.1.231.2.10.2.9.1.10.1 | INTEGER | not-accessible | Event type of the notification which caused the current trap. |
| STR sniWpNotificationNodeName | 1.3.6.1.4.1.231.2.10.2.9.1.10.3 | DisplayString | not-accessible | Name of the node which caused the current trap. |
| STR sniWpNotificationResourceTypeName | 1.3.6.1.4.1.231.2.10.2.9.1.10.4 | DisplayString | not-accessible | Name of the resource type which caused the current trap. |
| STR sniWpNotificationGroupName | 1.3.6.1.4.1.231.2.10.2.9.1.10.5 | DisplayString | not-accessible | Name of the group which caused the current trap. |
| STR sniWpNotificationResourceName | 1.3.6.1.4.1.231.2.10.2.9.1.10.6 | DisplayString | not-accessible | Name of the resource which caused the current trap. |
| STR sniWpNotificationClusterKeyName | 1.3.6.1.4.1.231.2.10.2.9.1.10.9 | DisplayString | not-accessible | Relative name of the cluster registry key which caused the current trap. |
| STR sniWpNotificationNetworkName | 1.3.6.1.4.1.231.2.10.2.9.1.10.11 | DisplayString | not-accessible | Name of the network which caused the current trap. |
| STR sniWpNotificationNetInterfaceName | 1.3.6.1.4.1.231.2.10.2.9.1.10.12 | DisplayString | not-accessible | Name of the network interface which caused the current trap. |
| sniWpNetworks | 1.3.6.1.4.1.231.2.10.2.9.1.11 | |||
| INT sniWpNetworkNumber | 1.3.6.1.4.1.231.2.10.2.9.1.11.1 | INTEGER | read-only | Number of Network in the cluster, and of sniWpNetworkTable entries. |
| sniWpNetworkTable | 1.3.6.1.4.1.231.2.10.2.9.1.11.2 | not-accessible | Table of cluster Networks. | |
| sniWpNetworkEntry | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1 | not-accessible | ||
| INT sniWpNetworkIndex | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.1 | INTEGER | read-only | Temporary index of the Network (1-based sequence). |
| STR sniWpNetworkName | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.2 | DisplayString | read-only | Name which identifies the Network. |
| INT sniWpNetworkState | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.3 | INTEGER | read-only | State of the Network: 1 - the state of the Network cannot be determined, or is none of the following: 2 - Network is up and fully operational, 3 - Network is down, 4 - Network is partitioned, 5 - Network is unavailable. |
| STR sniWpNetworkAddress | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.4 | DisplayString | read-only | The address of the network or subnet as a whole. |
| STR sniWpNetworkAddressMask | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.5 | DisplayString | read-only | The mask which distinguishes the network and host portions of an address. |
| STR sniWpNetworkDescription | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.6 | DisplayString | read-only | Remarks or comments about the network. |
| INT sniWpNetworkRole | 1.3.6.1.4.1.231.2.10.2.9.1.11.2.1.7 | INTEGER | read-only | The role of the network in the cluster: 1 - don't know, 2 - the network is not used by the cluster, 3 - the network is used to connect client systems to the cluster, 4 - the network is used to carry internal cluster communication, 5 - the network is used to connect client systems and to carry internal cluster communication. |
| sniWpNetInterfaces | 1.3.6.1.4.1.231.2.10.2.9.1.12 | |||
| INT sniWpNetInterfaceNumber | 1.3.6.1.4.1.231.2.10.2.9.1.12.1 | INTEGER | read-only | Total number of NetworkInterfaces. |
| sniWpNetInterfaceTable | 1.3.6.1.4.1.231.2.10.2.9.1.12.2 | not-accessible | Table of cluster NetworkInterfaces. | |
| sniWpNetInterfaceEntry | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1 | not-accessible | ||
| INT sniWpNetInterfaceNodeIndex | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.1 | INTEGER | read-only | Temporary index of the node of the network interface (same set of values as that of sniWpNodeIndex). |
| INT sniWpNetInterfaceNetworkIndex | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.2 | INTEGER | read-only | Temporary index of the network of the interface (subset of the set of values of sniWpNetworkIndex). |
| STR sniWpNetInterfaceName | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.3 | DisplayString | read-only | Name which identifies the network interface. |
| INT sniWpNetInterfaceState | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.4 | INTEGER | read-only | The state of the network interface: 1 - the state of the network interface cannot be determined, or is none of the following: 2 - the network interface is operational, 3 - the network interface is not operational, 4 - the network interface is not accessible from any node, 5 - the network interface is not available. |
| STR sniWpNetInterfaceAdapter | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.5 | DisplayString | read-only | Name that is used to uniquely identify the network interface. |
| STR sniWpNetInterfaceAddress | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.6 | DisplayString | read-only | Primary network address that the node uses for the network interface. |
| STR sniWpNetInterfaceDescription | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.7 | DisplayString | read-only | Remarks or comments about the network interface. |
| STR sniWpNetInterfaceAdapterId | 1.3.6.1.4.1.231.2.10.2.9.1.12.2.1.8 | DisplayString | read-only | Identification of the network interface adapter. |
RFC description
Provides read-only monitoring of Microsoft Wolfpack cluster API including nodes, groups, resources, and network interfaces.
Start monitoring Siemens Nixdorf / Fujitsu Siemens Windows NT server cluster node (MSCS cluster service/quorum status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.