SNI-MYLEX-MIB

All MIBs › SNI-MYLEX-MIB

Category: Disk and Storage Health Monitoring, Server and Host Management, Siemens Nixdorf Server Management

Description: Manages Siemens Nixdorf server Mylex RAID controller configuration, array status, and rebuild progress.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SNI-MYLEX-MIB?

This is a vendor-specific MIB, originally from Mylex and rebranded under Siemens Nixdorf (SNI), for managing Mylex RAID controllers installed in SNI servers. It exposes RAID agent identity/version information, API error status, and a table of host adapters attached to the RAID subsystem, along with trap definitions for controller events. Its central monitoring purpose is hardware/software status of the storage subsystem: administrators track mylexAgentVersion/mylexAgentBuild to confirm the management agent's software revision, watch mylexApiLastErrorMsg for API-level failures, and enumerate mylexAdapterHostTable entries to verify each RAID host adapter is recognized and healthy, which together surface degraded arrays, failed controllers, or communication problems with the RAID hardware before data loss occurs. It has an implicit but undocumented dependency on the underlying Mylex RAID controller firmware and its proprietary management API. It is deployed in Siemens Nixdorf servers using Mylex RAID controllers for disk array protection in enterprise data centers, where SNI-MYLEX-MIB SNMP monitoring helps catch a degraded array before data loss occurs.

IPNetwork Monitor allows you to monitor SNMP objects defined in SNI-MYLEX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens Nixdorf server with Mylex RAID controller

Monitoring Examples

An operator checks mylexAgentVersion, mylexAgentVersionMajor, and mylexAgentVersionMinor to confirm the RAID management agent's software build, and polls mylexApiLastErrorMsg to detect the controller's API reporting an error such as a failed drive access. The mylexAdapterHostTable (mylexAdapterHost entries) lists each host adapter connected to the RAID subsystem, letting an admin verify all expected adapters are present after a hardware change. mylexTrapInfo carries event notifications, such as an array degradation or rebuild event, that the SNMP manager can correlate with the last API error.

What Can Be Monitored

RAID agent software version/build
RAID API last error message
host adapter inventory
RAID controller trap/event notifications

Imported Objects

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

From RFC1212-MIB

OBJECT-TYPE

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF mylexAdapterDied	1.3.6.1.4.1.231.2.10.2.0.221			Adapter died
INT mylexAdapterGeneralStatus	1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.2	INTEGER	read-only	General adapter status
INT mylexAdapterGeneralStatusAdapterId	1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.1	INTEGER	read-only	Adapter number (index)
mylexAdapterGeneralStatusEntry	1.3.6.1.4.1.231.2.10.2.6.2.1.7.1		not-accessible	Table entry of general adapter status
mylexAdapterGeneralStatusTable	1.3.6.1.4.1.231.2.10.2.6.2.1.7		not-accessible	Table of general adapter status
mylexAdapterHost	1.3.6.1.4.1.231.2.10.2.6.2.1.2.1		not-accessible
INT mylexAdapterHostChannelNumber	1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.3	INTEGER	read-only	SCSI host channel number the Mylex SCSI-to-SCSI Adapter is connected to; will be 0 for local adapters.
INT mylexAdapterHostControllerNumber	1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.4	INTEGER	read-only	SCSI host controller number the Mylex SCSI-to-SCSI Adapter is connected to; will be 0 for local adapters.
mylexAdapterHostTable	1.3.6.1.4.1.231.2.10.2.6.2.1.2		not-accessible	Mylex adapter host information table. Only for SCSI-to-SCSI adapters (DAC960SX). Defines for each Mylex adapter to which host controller, bus and target the adapter is connected to.
INT mylexAdapterHostTargetId	1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.2	INTEGER	read-only	Target ID of the Mylex SCSI-to-SCSI Adapter. Will be 0xFFFF for local adapters.
mylexAdapterInfoEntry	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1		not-accessible	Mylex Adapter Info table entry
INT mylexAdapterInfoId	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.1	INTEGER	read-only	Adapter number (index)
mylexAdapterInfoTable	1.3.6.1.4.1.231.2.10.2.6.2.1.3		not-accessible	Mylex Adapter Info table
INT mylexAdapterNum	1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.1	INTEGER	read-only	Adapter number (index)
STR mylexAgentBuild	1.3.6.1.4.1.231.2.10.2.6.2.1.1.4	DisplayString	read-only	Mylex SNMP agent build date and time string
STR mylexAgentCompany	1.3.6.1.4.1.231.2.10.2.6.2.1.1.2	DisplayString	read-only	Mylex SNMP agent company string
STR mylexAgentId	1.3.6.1.4.1.231.2.10.2.6.2.1.1.1	DisplayString	read-only	Mylex SNMP agent ID string
STR mylexAgentVersion	1.3.6.1.4.1.231.2.10.2.6.2.1.1.3	DisplayString	read-only	Mylex SNMP agent version string
INT mylexAgentVersionMajor	1.3.6.1.4.1.231.2.10.2.6.2.1.1.5	INTEGER	read-only	Mylex SNMP agent major version number
INT mylexAgentVersionMinor	1.3.6.1.4.1.231.2.10.2.6.2.1.1.6	INTEGER	read-only	Mylex SNMP agent minor version number (to be displayed with 2 digits)
STR mylexApiLastErrorMsg	1.3.6.1.4.1.231.2.10.2.6.2.1.1.7	DisplayString	read-only	Message string of last error occurred with Mylex API
INT mylexApiRelease	1.3.6.1.4.1.231.2.10.2.6.2.1.1.8	INTEGER	read-only	Mylex API library release number
INT mylexApiRevision	1.3.6.1.4.1.231.2.10.2.6.2.1.1.9	INTEGER	read-only	Mylex API library revision number
NTF mylexAutoRebuildStarted	1.3.6.1.4.1.231.2.10.2.0.200			Automatic rebuild was started
NTF mylexAutoRebuildStarted2	1.3.6.1.4.1.231.2.10.2.0.222			Automatic rebuild was started
INT mylexBadBlocks	1.3.6.1.4.1.231.2.10.2.6.2.1.8.9	INTEGER	not-accessible	Number of bad blocks after rebuild/check error
INT mylexBaseAddress	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.4	INTEGER	read-only	I/O base address (-1 if unknown)
NTF mylexBBUFound	1.3.6.1.4.1.231.2.10.2.0.275			Battery Backup Unit found
NTF mylexBBUPowerLow	1.3.6.1.4.1.231.2.10.2.0.276			Battery Backup Unit power is low
NTF mylexBBUPowerOK	1.3.6.1.4.1.231.2.10.2.0.277			Battery Backup Unit power is OK
STR mylexBIOSVersion	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.12	DisplayString	read-only	BIOS version
INT mylexBusType	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.9	INTEGER	read-only	Bus type (EISA/MCAS/PCI ...)
INT mylexCacheSize	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.3	INTEGER	read-only	Size of cache RAM module (kBytes); -1 if unknown
INT mylexDefaultRebuildRate	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.13	INTEGER	read-only	Default rebuild/check rate (%)
STR mylexFirmwareVersion	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.11	DisplayString	read-only	Firmware version
INT mylexFlashEEpromSize	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.21	INTEGER	read-only	Size of flash EEPROM (kBytes)
NTF mylexGamDriverIncorrectVersion	1.3.6.1.4.1.231.2.10.2.0.262			Mylex GAM driver does not have the correct version
NTF mylexGamDriverMissing	1.3.6.1.4.1.231.2.10.2.0.261			Mylex GAM driver missing or failed to start
NTF mylexInitializationCanceled	1.3.6.1.4.1.231.2.10.2.0.231			System drive initialization canceled
NTF mylexInitializationDone	1.3.6.1.4.1.231.2.10.2.0.230			System drive initialization done
NTF mylexInitializationFailed	1.3.6.1.4.1.231.2.10.2.0.232			System drive initialization failed
NTF mylexInitializationStarted	1.3.6.1.4.1.231.2.10.2.0.229			System drive initialization started
INT mylexInterruptIRQ	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.10	INTEGER	read-only	Interrupt request line (IRQ); -1 if unknown
INT mylexLogicalDrive	1.3.6.1.4.1.231.2.10.2.6.2.1.8.10	INTEGER	not-accessible	Logical drive number (in a logical drive trap)
INT mylexLogicalDriveContentsAdapterId	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.1	INTEGER	read-only	Adapter number (index)
INT mylexLogicalDriveContentsChannelNr	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.4	INTEGER	read-only	Channel number of the physical device
mylexLogicalDriveContentsEntry	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1		not-accessible	Table entry of physical devices that belong to a logical drive
INT mylexLogicalDriveContentsLogDrvNum	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.2	INTEGER	read-only	Logical drive number (index)
INT mylexLogicalDriveContentsPhysDevNr	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.5	INTEGER	read-only	SCSI Id of the physical device
INT mylexLogicalDriveContentsPhysIndex	1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.3	INTEGER	read-only	Physical device number belonging to this logical drive (index)
mylexLogicalDriveContentsTable	1.3.6.1.4.1.231.2.10.2.6.2.1.6		not-accessible	Table of physical devices that belong to a logical drive
NTF mylexLogicalDriveCritical	1.3.6.1.4.1.231.2.10.2.0.215			Logical drive went critical
NTF mylexLogicalDriveOffline	1.3.6.1.4.1.231.2.10.2.0.214			Logical drive went offline
NTF mylexLogicalDriveOnline	1.3.6.1.4.1.231.2.10.2.0.216			Logical drive went online
INT mylexLogicalInfoAdapterId	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.1	INTEGER	read-only	Adapter number (index)
mylexLogicalInfoEntry	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1		not-accessible	Logical drive info table entry
INT mylexLogicalInfoLogDrvNum	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.2	INTEGER	read-only	Logical drive number (index)
INT mylexLogicalInfoRaidLevel	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.6	INTEGER	read-only	Drive RAID level
INT mylexLogicalInfoSize	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.4	INTEGER	read-only	Actual size of drive at RAID level (MBytes)
INT mylexLogicalInfoStatus	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.3	INTEGER	read-only	Logical drive status
mylexLogicalInfoTable	1.3.6.1.4.1.231.2.10.2.6.2.1.5		not-accessible	Logical drive info table
INT mylexLogicalInfoTotalSize	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.5	INTEGER	read-only	Total physical size (MBytes)
INT mylexLogicalInfoWriteBack	1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.7	INTEGER	read-only	Cache write back / write through
INT mylexLogicalSectorSize	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.23	INTEGER	read-only	Size of logical sector (Bytes)
NTF mylexManualRebuildStarted	1.3.6.1.4.1.231.2.10.2.0.201			Manual rebuild was started
NTF mylexManualRebuildStarted2	1.3.6.1.4.1.231.2.10.2.0.223			Manual rebuild was started
INT mylexMaxChannels	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.15	INTEGER	read-only	Maximum number of channels
INT mylexMaxLogicalDrives	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.17	INTEGER	read-only	Maximum logical drives
INT mylexMaxPhysicalDevices	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.19	INTEGER	read-only	Maximum physical devices
STR mylexModel	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.2	DisplayString	read-only	Adapter model/submodel
GAU mylexNumChannels	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.14	Gauge	read-only	Current number of channels
GAU mylexNumLogicalDrives	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.16	Gauge	read-only	Current number of logical drives
GAU mylexNumPhysicalDevices	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.18	Gauge	read-only	Current number of physical devices
NTF mylexParityCheckCanceled	1.3.6.1.4.1.231.2.10.2.0.210			Parity check cancelled
NTF mylexParityCheckDone	1.3.6.1.4.1.231.2.10.2.0.209			Parity check successfully completed
NTF mylexParityCheckError	1.3.6.1.4.1.231.2.10.2.0.212			Parity check error, bad blocks detected
NTF mylexParityCheckLogicalDriveFailed	1.3.6.1.4.1.231.2.10.2.0.213			Parity check finished, logical drive failed
NTF mylexParityCheckStarted	1.3.6.1.4.1.231.2.10.2.0.208			Parity check was started
NTF mylexParityCheckStatus	1.3.6.1.4.1.231.2.10.2.0.211			Parity check status
INT mylexPhysChannel	1.3.6.1.4.1.231.2.10.2.6.2.1.8.12	INTEGER	not-accessible	Physical channel number (in a physical device trap)
INT mylexPhysDevice	1.3.6.1.4.1.231.2.10.2.6.2.1.8.11	INTEGER	not-accessible	Physical device number (in a physical device trap)
INT mylexPhysicalDeviceAdapterId	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.1	INTEGER	read-only	Adapter number (index)
NTF mylexPhysicalDeviceAdded	1.3.6.1.4.1.231.2.10.2.0.257			Physical device added
NTF mylexPhysicalDeviceAlive	1.3.6.1.4.1.231.2.10.2.0.218			Physical device online
INT mylexPhysicalDeviceCapacity	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.6	INTEGER	read-only	Disk capacity (MBytes; only for configured DAC disks)
INT mylexPhysicalDeviceChannelNr	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.2	INTEGER	read-only	Channel number (index)
INT mylexPhysicalDeviceDevNr	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.3	INTEGER	read-only	Physical device number (index)
NTF mylexPhysicalDeviceDied	1.3.6.1.4.1.231.2.10.2.0.217			Physical device died
INT mylexPhysicalDeviceDiskConfigured	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.13	INTEGER	read-only	Device is a configured DAC disk
NTF mylexPhysicalDeviceHardError	1.3.6.1.4.1.231.2.10.2.0.251			Physical device hard error
CTR mylexPhysicalDeviceHardErrors	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.11	Counter	read-only	Hardware error count (only for configured DAC disks)
NTF mylexPhysicalDeviceHotspare	1.3.6.1.4.1.231.2.10.2.0.250			Physical device now hotspare (standby)
mylexPhysicalDeviceInfoEntry	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1		not-accessible	Physical device info table entry
mylexPhysicalDeviceInfoTable	1.3.6.1.4.1.231.2.10.2.6.2.1.4		not-accessible	Physical device info table
NTF mylexPhysicalDeviceMiscError	1.3.6.1.4.1.231.2.10.2.0.254			Physical device miscellaneous error
CTR mylexPhysicalDeviceMiscErrors	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.12	Counter	read-only	Miscellaneous error count (only for configured DAC disks)
STR mylexPhysicalDeviceModel	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.5	DisplayString	read-only	Physical device model name
INT mylexPhysicalDeviceParamFastScsi	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.15	INTEGER	read-only	SCSI device parameter: Fast SCSI
INT mylexPhysicalDeviceParamTaggedQueueing	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.17	INTEGER	read-only	SCSI device parameter: Tagged queueing
INT mylexPhysicalDeviceParamWideScsi	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.16	INTEGER	read-only	SCSI device parameter: Wide SCSI
NTF mylexPhysicalDeviceParityError	1.3.6.1.4.1.231.2.10.2.0.253			Physical device parity error
CTR mylexPhysicalDeviceParityErrors	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.9	Counter	read-only	Parity error count (only for configured DAC disks)
NTF mylexPhysicalDevicePrefailure	1.3.6.1.4.1.231.2.10.2.0.255			Physical device prefailure
INT mylexPhysicalDeviceRebuildRate	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.8	INTEGER	read-only	Rebuild rate (only for configured DAC disks)
NTF mylexPhysicalDeviceRemoved	1.3.6.1.4.1.231.2.10.2.0.258			Physical device removed
INT mylexPhysicalDeviceScsiDeviceType	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.14	INTEGER	read-only	SCSI device type
INT mylexPhysicalDeviceSmartCompliant	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.18	INTEGER	read-only	Is this device SMART (Self Monitoring Analysis and Reporting Technology) compliant? If SMART information cannot be obtained, false(2) must be reported.
INT mylexPhysicalDeviceSmartMonitoring	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.19	INTEGER	read-write	In write mode, only enable and disable are allowed. An error will be reported if you try to enable a non Smart compliant device. In read mode, not-available(3) is returned if the device is not Smart compliant. Disable will be reported, if one option or more has changed after the initial configuration of the agent.
INT mylexPhysicalDeviceSmartStatus	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.20	INTEGER	read-only	If not SmartCompliant or SmartMonitoring disabled, not-available(3) must be reported.
NTF mylexPhysicalDeviceSoftError	1.3.6.1.4.1.231.2.10.2.0.252			Physical device soft error
CTR mylexPhysicalDeviceSoftErrors	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.10	Counter	read-only	Soft error count (only for configured DAC disks)
INT mylexPhysicalDeviceStatus	1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.7	INTEGER	read-only	Disk status (only for configured DAC disks)
NTF mylexPhysicalDeviceUnconfigured	1.3.6.1.4.1.231.2.10.2.0.256			Physical device unconfigured
INT mylexPhysicalSectorSize	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.22	INTEGER	read-only	Size of a physical sector (Bytes)
NTF mylexRaidExpansionDone	1.3.6.1.4.1.231.2.10.2.0.236			RAID capacity expansion successfully finished
NTF mylexRaidExpansionFailed	1.3.6.1.4.1.231.2.10.2.0.237			RAID capacity expansion failed
NTF mylexRaidExpansionStarted	1.3.6.1.4.1.231.2.10.2.0.235			RAID capacity expansion started
NTF mylexRaidTypeChanged	1.3.6.1.4.1.231.2.10.2.0.240			System drive RAID type was changed
NTF mylexRebuildCanceled	1.3.6.1.4.1.231.2.10.2.0.203			Rebuild cancelled
NTF mylexRebuildCanceled2	1.3.6.1.4.1.231.2.10.2.0.225			Rebuild cancelled
NTF mylexRebuildDone	1.3.6.1.4.1.231.2.10.2.0.202			Rebuild successfully completed
NTF mylexRebuildDone2	1.3.6.1.4.1.231.2.10.2.0.224			Rebuild successfully completed
NTF mylexRebuildError	1.3.6.1.4.1.231.2.10.2.0.205			Rebuild error, bad blocks detected
NTF mylexRebuildError2	1.3.6.1.4.1.231.2.10.2.0.226			Rebuild error, bad blocks detected
NTF mylexRebuildLogicalDriveFailed	1.3.6.1.4.1.231.2.10.2.0.207			Rebuild finished, logical drive failed
NTF mylexRebuildLogicalDriveFailed2	1.3.6.1.4.1.231.2.10.2.0.228			Rebuild finished, logical drive failed
INT mylexRebuildNewChannel	1.3.6.1.4.1.231.2.10.2.6.2.1.8.5	INTEGER	not-accessible	Channel number of the new physical disk while Rebuild
INT mylexRebuildNewDevice	1.3.6.1.4.1.231.2.10.2.6.2.1.8.4	INTEGER	not-accessible	Device number of the new physical disk while rebuild
NTF mylexRebuildNewDeviceFailed	1.3.6.1.4.1.231.2.10.2.0.206			Rebuild finished, new device failed
NTF mylexRebuildNewDeviceFailed2	1.3.6.1.4.1.231.2.10.2.0.227			Rebuild finished, new device failed
INT mylexRebuildOldChannel	1.3.6.1.4.1.231.2.10.2.6.2.1.8.3	INTEGER	not-accessible	Channel number of the failed physical disk that enforced a rebuild
INT mylexRebuildOldDevice	1.3.6.1.4.1.231.2.10.2.6.2.1.8.2	INTEGER	not-accessible	Device number of the failed physical disk that enforced a rebuild
NTF mylexRebuildStatus	1.3.6.1.4.1.231.2.10.2.0.204			Rebuild status
INT mylexSlotNumber	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.24	INTEGER	read-only	Slot number the adapter is in
NTF mylexSMARTConfigurationChanged	1.3.6.1.4.1.231.2.10.2.0.271			S.M.A.R.T configuration has been changed.
NTF mylexSMARTFailurePredicted	1.3.6.1.4.1.231.2.10.2.0.270			Sent if a failure (S.M.A.R.T) has been predicted on a physical disk.
NTF mylexStateChangeTableFull	1.3.6.1.4.1.231.2.10.2.0.220			State-change table threshold reached
INT mylexStatusBlocksRemaining	1.3.6.1.4.1.231.2.10.2.6.2.1.8.8	INTEGER	not-accessible	Blocks remaining while rebuild/check (MBytes)
INT mylexStatusCurrentDrive	1.3.6.1.4.1.231.2.10.2.6.2.1.8.6	INTEGER	not-accessible	Number of the current logical drive being rebuilt/checked
INT mylexStatusCurrentDriveSize	1.3.6.1.4.1.231.2.10.2.6.2.1.8.7	INTEGER	not-accessible	Size of current logical drive being rebuilt/checked (MBytes)
INT mylexStripeSize	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.20	INTEGER	read-only	Stripe Size (8K chunks)
NTF mylexSystemDriveBadBlock	1.3.6.1.4.1.231.2.10.2.0.238			Bad block(s) detected on system drive
NTF mylexSystemDriveCreated	1.3.6.1.4.1.231.2.10.2.0.233			New system drive created
NTF mylexSystemDriveDeleted	1.3.6.1.4.1.231.2.10.2.0.234			System drive deleted
NTF mylexSystemDriveSizeChanged	1.3.6.1.4.1.231.2.10.2.0.239			System drive size was changed
mylexTrapInfo	1.3.6.1.4.1.231.2.10.2.6.2.1.8
STR mylexTrapServerName	1.3.6.1.4.1.231.2.10.2.6.2.1.8.13	DisplayString	not-accessible	Server name this trap comes from
INT mylexTrapSlotNumber	1.3.6.1.4.1.231.2.10.2.6.2.1.8.14	INTEGER	not-accessible	Slot number of the adapter generating this trap
STR mylexTrapString1	1.3.6.1.4.1.231.2.10.2.6.2.1.8.15	DisplayString	not-accessible	General purpose string 1 for trap parameters
STR mylexTrapString2	1.3.6.1.4.1.231.2.10.2.6.2.1.8.16	DisplayString	not-accessible	General purpose string 2 for trap parameters
INT mylexTrapTime	1.3.6.1.4.1.231.2.10.2.6.2.1.8.1	INTEGER	not-accessible	Trap time (in seconds since 1/1/1970)
STR mylexVendorName	1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.25	DisplayString	read-only	Name of the adapter vendor
NTF mylexWriteBackError	1.3.6.1.4.1.231.2.10.2.0.219			Write back error
NTF mylexWriteBackError2	1.3.6.1.4.1.231.2.10.2.0.260			Write back error
sni	1.3.6.1.4.1.231
sniBios	1.3.6.1.4.1.231.2.10.2.2.1
sniBus	1.3.6.1.4.1.231.2.10.2.2.4
sniCommon	1.3.6.1.4.1.231.2.10.2.2
sniEisa	1.3.6.1.4.1.231.2.10.2.2.2
sniExtensions	1.3.6.1.4.1.231.2.10
sniHd	1.3.6.1.4.1.231.2.10.2.2.3
sniInventory	1.3.6.1.4.1.231.2.10.2.1
sniMlxDiskArray	1.3.6.1.4.1.231.2.10.2.6.2.1
sniMylexAgentInfo	1.3.6.1.4.1.231.2.10.2.6.2.1.1
sniNetware	1.3.6.1.4.1.231.2.10.2.5.1
sniOemComponents	1.3.6.1.4.1.231.2.10.2.6
sniOemDpt	1.3.6.1.4.1.231.2.10.2.6.1
sniOemMylex	1.3.6.1.4.1.231.2.10.2.6.2
sniOs2	1.3.6.1.4.1.231.2.10.2.5.3
sniOsSpecific	1.3.6.1.4.1.231.2.10.2.5
sniPcSpecific	1.3.6.1.4.1.231.2.10.2.3
sniProductMibs	1.3.6.1.4.1.231.2
sniScb	1.3.6.1.4.1.231.2.10.2.4
sniSecurity	1.3.6.1.4.1.231.2.10.2.7
sniServerControl	1.3.6.1.4.1.231.2.10.2.2.5
sniServerMgmt	1.3.6.1.4.1.231.2.10.2
sniServerView	1.3.6.1.4.1.231.2.10.2.8
sniSmSecurity	1.3.6.1.4.1.231.2.10.2.7.1
sniTrapMib	1.3.6.1.4.1.231.2.10.5
sniUnix	1.3.6.1.4.1.231.2.10.2.5.4
sniWinNt	1.3.6.1.4.1.231.2.10.2.5.2

RFC description

Siemens Nixdorf Information (SNI) Mylex RAID array management MIB; monitors RAID controller, disk drive health, and array rebuild status.

Start monitoring Siemens Nixdorf server with Mylex RAID controller (RAID agent/adapter health status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SNI-MYLEX-MIB

What Is SNI-MYLEX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description