SLE-RMON-MIB

All MIBs › SLE-RMON-MIB

Organization: ORGANIZATION

Last Updated: 2004-12-08

Category: DASAN Networks SLE OLT Management

Description: Provides DASAN Networks SLE OLT RMON statistics groups for historical traffic and event monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-RMON-MIB?

SLE-RMON-MIB is a DASAN SLE platform proprietary MIB (built on AN-MIB/DASAN-SMI) implementing standard RMON history/alarm functionality. Its history table, keyed by index, records data source, requested/granted bucket count, interval, owner, and status, with a companion control table (request, status, timer, timestamp, request result, index, data source, buckets requested, interval, owner, status) and created/destroyed/profile-changed counters, alongside an alarm table. As a performance/configuration MIB it lets an administrator confirm which interfaces have RMON history collection configured and review alarm thresholds on a DASAN SLE platform. It is deployed on DASAN SLE platform equipment (RMON). Engineers can download the SLE-RMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-RMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN SLE platform equipment (RMON)

Monitoring Examples

An administrator checks sleHistoryControlBucketsRequested and sleAlarmTable to confirm RMON history collection and alarm configuration on a DASAN SLE platform.

What Can Be Monitored

RMON history collection and alarm-threshold configuration

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleRmon	1.3.6.1.4.1.6296.101.9			This MIB contains all needed informations about rmon and all supported sle rmon features.
sleHistory	1.3.6.1.4.1.6296.101.9.1
sleHistoryTable	1.3.6.1.4.1.6296.101.9.1.1		not-accessible	A list of history control entries.
sleHistoryEntry	1.3.6.1.4.1.6296.101.9.1.1.1		not-accessible	A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the sleHistoryControlInterval object might be named sleHistoryControlInterval.2
INT sleHistoryIndex	1.3.6.1.4.1.6296.101.9.1.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
OID sleHistoryDataSource	1.3.6.1.4.1.6296.101.9.1.1.1.2	OBJECT IDENTIFIER	read-only	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573 [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
INT sleHistoryBucketsRequested	1.3.6.1.4.1.6296.101.9.1.1.1.3	INTEGER	read-only	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT sleHistoryBucketsGranted	1.3.6.1.4.1.6296.101.9.1.1.1.4	INTEGER	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
INT sleHistoryInterval	1.3.6.1.4.1.6296.101.9.1.1.1.5	INTEGER	read-only	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
STR sleHistoryOwner	1.3.6.1.4.1.6296.101.9.1.1.1.6	OwnerString	read-only	The entity that configured this entry and is therefore using the resources assigned to it.
SLE sleHistoryStatus	1.3.6.1.4.1.6296.101.9.1.1.1.7	SleEntryStatus	read-only	The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
sleHistoryControl	1.3.6.1.4.1.6296.101.9.1.2
INT sleHistoryControlRequest	1.3.6.1.4.1.6296.101.9.1.2.1	INTEGER	read-write	createHistory: sleHistoryControlIndex sleHistoryControlDataSource sleHistoryControlBucketsRequested sleHistoryControlInterval sleHistoryControlOwner sleHistoryControlSts destroyHistory: sleHistoryControlIndex setHistoryProfile: sleHistoryControlIndex sleHistoryControlDataSource sleHistoryControlBucketsRequested sleHistoryControlInterval sleHistoryControlOwner sleHistoryControlSts
SLE sleHistoryControlStatus	1.3.6.1.4.1.6296.101.9.1.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleHistoryControlTimer	1.3.6.1.4.1.6296.101.9.1.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleHistoryControlTimeStamp	1.3.6.1.4.1.6296.101.9.1.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleHistoryControlReqResult	1.3.6.1.4.1.6296.101.9.1.2.5	SleControlRequestResultType	read-only	The result of the last user command.
INT sleHistoryControlIndex	1.3.6.1.4.1.6296.101.9.1.2.6	INTEGER	read-write	Description.
OID sleHistoryControlDataSource	1.3.6.1.4.1.6296.101.9.1.2.7	OBJECT IDENTIFIER	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573 [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
INT sleHistoryControlBucketsRequested	1.3.6.1.4.1.6296.101.9.1.2.8	INTEGER	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
INT sleHistoryControlInterval	1.3.6.1.4.1.6296.101.9.1.2.9	INTEGER	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
STR sleHistoryControlOwner	1.3.6.1.4.1.6296.101.9.1.2.10	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
SLE sleHistoryControlSts	1.3.6.1.4.1.6296.101.9.1.2.11	SleEntryStatus	read-write	The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
sleHistoryNotification	1.3.6.1.4.1.6296.101.9.1.3
NTF sleHistoryCreated	1.3.6.1.4.1.6296.101.9.1.3.1			Description.
NTF sleHistoryDestroyed	1.3.6.1.4.1.6296.101.9.1.3.2			Description.
NTF sleHistoryProfileChanged	1.3.6.1.4.1.6296.101.9.1.3.3			Description.
sleAlarm	1.3.6.1.4.1.6296.101.9.2
sleAlarmTable	1.3.6.1.4.1.6296.101.9.2.1		not-accessible	A list of alarm entries.
sleAlarmEntry	1.3.6.1.4.1.6296.101.9.2.1.1		not-accessible	A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the sleAlarmValue object might be named sleAlarmValue.8
INT sleAlarmIndex	1.3.6.1.4.1.6296.101.9.2.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
I32 sleAlarmInterval	1.3.6.1.4.1.6296.101.9.2.1.1.2	Integer32	read-only	The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
OID sleAlarmVariable	1.3.6.1.4.1.6296.101.9.2.1.1.3	OBJECT IDENTIFIER	read-only	The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an establisled alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT sleAlarmSampleType	1.3.6.1.4.1.6296.101.9.2.1.1.4	INTEGER	read-only	The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
I32 sleAlarmValue	1.3.6.1.4.1.6296.101.9.2.1.1.5	Integer32	read-only	The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
INT sleAlarmStartupAlarm	1.3.6.1.4.1.6296.101.9.2.1.1.6	INTEGER	read-only	The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
I32 sleAlarmRisingThreshold	1.3.6.1.4.1.6296.101.9.2.1.1.7	Integer32	read-only	A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
I32 sleAlarmFallingThreshold	1.3.6.1.4.1.6296.101.9.2.1.1.8	Integer32	read-only	A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
INT sleAlarmRisingEventIndex	1.3.6.1.4.1.6296.101.9.2.1.1.9	INTEGER	read-only	The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
INT sleAlarmFallingEventIndex	1.3.6.1.4.1.6296.101.9.2.1.1.10	INTEGER	read-only	The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
STR sleAlarmOwner	1.3.6.1.4.1.6296.101.9.2.1.1.11	OwnerString	read-only	The entity that configured this entry and is therefore using the resources assigned to it.
SLE sleAlarmStatus	1.3.6.1.4.1.6296.101.9.2.1.1.12	SleEntryStatus	read-only	The status of this alarm entry.
sleAlarmControl	1.3.6.1.4.1.6296.101.9.2.2
INT sleAlarmControlRequest	1.3.6.1.4.1.6296.101.9.2.2.1	INTEGER	read-write	createAlarm: (sleAlarmControlIndex) sleAlarmInterval sleAlarmControlVariable sleAlarmControlSampleType sleAlarmControlStartupAlarm sleAlarmControlRisingThreshold sleAlarmControlFallingThreshold sleAlarmControlRisingEventIndex sleAlarmControlFallingEventIndex sleAlarmControlOwner sleAlarmControlSts destroyAlarm: sleAlarmControlIndex setAlarmProfile: sleAlarmControlIndex sleAlarmControlInterval sleAlarmControlVariable sleAlarmControlSampleType sleAlarmControlStartupAlarm sleAlarmControlRisingThreshold sleAlarmControlFallingThreshold sleAlarmControlRisingEventIndex sleAlarmControlFallingEventIndex sleAlarmControlOwner sleAlarmControlSts
SLE sleAlarmControlStatus	1.3.6.1.4.1.6296.101.9.2.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleAlarmControlTimer	1.3.6.1.4.1.6296.101.9.2.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleAlarmControlTimeStamp	1.3.6.1.4.1.6296.101.9.2.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleAlarmControlReqResult	1.3.6.1.4.1.6296.101.9.2.2.5	SleControlRequestResultType	read-only	The result of the last user command.
INT sleAlarmControlIndex	1.3.6.1.4.1.6296.101.9.2.2.6	INTEGER	read-write	Description.
I32 sleAlarmControlInterval	1.3.6.1.4.1.6296.101.9.2.2.7	Integer32	read-write	The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
OID sleAlarmControlVariable	1.3.6.1.4.1.6296.101.9.2.2.8	OBJECT IDENTIFIER	read-write	The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an establisled alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT sleAlarmControlSampleType	1.3.6.1.4.1.6296.101.9.2.2.9	INTEGER	read-write	The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT sleAlarmControlStartupAlarm	1.3.6.1.4.1.6296.101.9.2.2.10	INTEGER	read-write	The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
I32 sleAlarmControlRisingThreshold	1.3.6.1.4.1.6296.101.9.2.2.11	Integer32	read-write	A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
I32 sleAlarmControlFallingThreshold	1.3.6.1.4.1.6296.101.9.2.2.12	Integer32	read-write	A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
INT sleAlarmControlRisingEventIndex	1.3.6.1.4.1.6296.101.9.2.2.13	INTEGER	read-write	The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
INT sleAlarmControlFallingEventIndex	1.3.6.1.4.1.6296.101.9.2.2.14	INTEGER	read-write	The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated sleAlarmStatus object is equal to valid(1).
STR sleAlarmControlOwner	1.3.6.1.4.1.6296.101.9.2.2.15	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
SLE sleAlarmControlSts	1.3.6.1.4.1.6296.101.9.2.2.16	SleEntryStatus	read-write	The status of this alarm entry.
sleAlarmNotification	1.3.6.1.4.1.6296.101.9.2.3
NTF sleAlarmCreated	1.3.6.1.4.1.6296.101.9.2.3.1			Description.
NTF sleAlarmDestroyed	1.3.6.1.4.1.6296.101.9.2.3.2			Description.
NTF sleAlarmProfileChanged	1.3.6.1.4.1.6296.101.9.2.3.3			Description.
sleEvent	1.3.6.1.4.1.6296.101.9.3
sleEventTable	1.3.6.1.4.1.6296.101.9.3.1		not-accessible	A list of events to be generated.
sleEventEntry	1.3.6.1.4.1.6296.101.9.3.1.1		not-accessible	A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the sleEventLastTimeSent object might be named sleEventLastTimeSent.6
INT sleEventIndex	1.3.6.1.4.1.6296.101.9.3.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
STR sleEventDescription	1.3.6.1.4.1.6296.101.9.3.1.1.2	DisplayString	read-only	A comment describing this event entry.
INT sleEventType	1.3.6.1.4.1.6296.101.9.3.1.1.3	INTEGER	read-only	The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
OCT sleEventCommunity	1.3.6.1.4.1.6296.101.9.3.1.1.4	OCTET STRING	read-only	If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended that that mechanism be used to specify the destination of the trap.
TIK sleEventLastTimeSent	1.3.6.1.4.1.6296.101.9.3.1.1.5	TimeTicks	read-only	The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
STR sleEventOwner	1.3.6.1.4.1.6296.101.9.3.1.1.6	OwnerString	read-only	The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
SLE sleEventStatus	1.3.6.1.4.1.6296.101.9.3.1.1.7	SleEntryStatus	read-only	The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
sleEventControl	1.3.6.1.4.1.6296.101.9.3.2
INT sleEventControlRequest	1.3.6.1.4.1.6296.101.9.3.2.1	INTEGER	read-write	createEvent: (sleEventControlIndex) sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts destroyEvent: sleEventControlIndex setEventProfile: sleEventControlIndex sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts
SLE sleEventControlStatus	1.3.6.1.4.1.6296.101.9.3.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleEventControlTimer	1.3.6.1.4.1.6296.101.9.3.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleEventControlTimeStamp	1.3.6.1.4.1.6296.101.9.3.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleEventControlReqResult	1.3.6.1.4.1.6296.101.9.3.2.5	SleControlRequestResultType	read-only	The result of the last user command.
I32 sleEventControlIndex	1.3.6.1.4.1.6296.101.9.3.2.6	Integer32	read-write	Description.
STR sleEventControlDescription	1.3.6.1.4.1.6296.101.9.3.2.7	DisplayString	read-write	A comment describing this event entry.
INT sleEventControlType	1.3.6.1.4.1.6296.101.9.3.2.8	INTEGER	read-write	The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
OCT sleEventControlCommunity	1.3.6.1.4.1.6296.101.9.3.2.9	OCTET STRING	read-write	If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended that that mechanism be used to specify the destination of the trap.
STR sleEventControlOwner	1.3.6.1.4.1.6296.101.9.3.2.10	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
SLE sleEventControlSts	1.3.6.1.4.1.6296.101.9.3.2.11	SleEntryStatus	read-write	The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
sleEventNotification	1.3.6.1.4.1.6296.101.9.3.3
NTF sleEventCreated	1.3.6.1.4.1.6296.101.9.3.3.1			Description.
NTF sleEventDestroyed	1.3.6.1.4.1.6296.101.9.3.3.2			Description.
NTF sleEventProfileChanged	1.3.6.1.4.1.6296.101.9.3.3.3			Description.
sleStatistics	1.3.6.1.4.1.6296.101.9.4
sleEtherStats	1.3.6.1.4.1.6296.101.9.4.1
sleEtherStatsTable	1.3.6.1.4.1.6296.101.9.4.1.1		not-accessible	Description.
sleEtherStatsEntry	1.3.6.1.4.1.6296.101.9.4.1.1.1		not-accessible	Description.
INT sleEtherStatsIndex	1.3.6.1.4.1.6296.101.9.4.1.1.1.1	INTEGER	read-only	The value of this object uniquely identifies this sleEtherStats entry
OID sleEtherStatsDataSource	1.3.6.1.4.1.6296.101.9.4.1.1.1.2	OBJECT IDENTIFIER	read-only	This object identifies the source of the data that this sleEtherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573 [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated sleEtherStatsStatus object is equal to valid(1).
C32 sleEtherStatsDropEvents	1.3.6.1.4.1.6296.101.9.4.1.1.1.3	Counter32	read-only	The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
C32 sleEtherStatsOctets	1.3.6.1.4.1.6296.101.9.4.1.1.1.4	Counter32	read-only	The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
C32 sleEtherStatsPkts	1.3.6.1.4.1.6296.101.9.4.1.1.1.5	Counter32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
C32 sleEtherStatsBroadcastPkts	1.3.6.1.4.1.6296.101.9.4.1.1.1.6	Counter32	read-only	The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
C32 sleEtherStatsMulticastPkts	1.3.6.1.4.1.6296.101.9.4.1.1.1.7	Counter32	read-only	The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
C32 sleEtherStatsCRCAlignErrors	1.3.6.1.4.1.6296.101.9.4.1.1.1.8	Counter32	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
C32 sleEtherStatsUndersizePkts	1.3.6.1.4.1.6296.101.9.4.1.1.1.9	Counter32	read-only	The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
C32 sleEtherStatsOversizePkts	1.3.6.1.4.1.6296.101.9.4.1.1.1.10	Counter32	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
C32 sleEtherStatsFragments	1.3.6.1.4.1.6296.101.9.4.1.1.1.11	Counter32	read-only	The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
C32 sleEtherStatsJabbers	1.3.6.1.4.1.6296.101.9.4.1.1.1.12	Counter32	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
C32 sleEtherStatsCollisions	1.3.6.1.4.1.6296.101.9.4.1.1.1.13	Counter32	read-only	The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
C32 sleEtherStatsPkts64Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.14	Counter32	read-only	The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
C32 sleEtherStatsPkts65to127Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.15	Counter32	read-only	The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
C32 sleEtherStatsPkts128to255Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.16	Counter32	read-only	The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
C32 sleEtherStatsPkts256to511Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.17	Counter32	read-only	The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
C32 sleEtherStatsPkts512to1023Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.18	Counter32	read-only	The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
C32 sleEtherStatsPkts1024to1518Octets	1.3.6.1.4.1.6296.101.9.4.1.1.1.19	Counter32	read-only	The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
OCT sleEtherStatsOwner	1.3.6.1.4.1.6296.101.9.4.1.1.1.20	OCTET STRING	read-only	The entity that configured this entry and is therefore using the resources assigned to it.
SLE sleEtherStatsStatus	1.3.6.1.4.1.6296.101.9.4.1.1.1.21	SleEntryStatus	read-only	The status of this etherStats entry.
TIK sleEtherStatsClearedTime	1.3.6.1.4.1.6296.101.9.4.1.1.1.22	TimeTicks	read-only	Description.
sleEtherStatsControl	1.3.6.1.4.1.6296.101.9.4.1.2
INT sleEtherStatsControlRequest	1.3.6.1.4.1.6296.101.9.4.1.2.1	INTEGER	read-write	createEvent: (sleEventControlIndex) sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts destroyEvent: sleEventControlIndex setEventProfile: sleEventControlIndex sleEventControlDescription sleEventControlType sleEventControlCommunity sleEventControlOwner sleEventControlSts
SLE sleEtherStatsControlStatus	1.3.6.1.4.1.6296.101.9.4.1.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleEtherStatsControlTimer	1.3.6.1.4.1.6296.101.9.4.1.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleEtherStatsControlTimeStamp	1.3.6.1.4.1.6296.101.9.4.1.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleEtherStatsControlReqResult	1.3.6.1.4.1.6296.101.9.4.1.2.5	SleControlRequestResultType	read-only	The result of the last user command.
I32 sleEtherStatsControlIfIndex	1.3.6.1.4.1.6296.101.9.4.1.2.6	Integer32	read-write	Description.
sleRmonSimple	1.3.6.1.4.1.6296.101.9.5
sleRmonSimpleTable	1.3.6.1.4.1.6296.101.9.5.1		not-accessible	Description.
sleRmonSimpleEntry	1.3.6.1.4.1.6296.101.9.5.1.1		not-accessible	Description.
I32 sleRmonSimplePortIndex	1.3.6.1.4.1.6296.101.9.5.1.1.1	Integer32	read-only	The port index.
INT sleRmonSimpleSampleVariable	1.3.6.1.4.1.6296.101.9.5.1.1.2	INTEGER	read-only	The sample variable type.
I32 sleRmonSimpleSampleInterval	1.3.6.1.4.1.6296.101.9.5.1.1.3	Integer32	read-only	The sample interval. (10: minimum)
I32 sleRmonSimpleRisingThreshold	1.3.6.1.4.1.6296.101.9.5.1.1.4	Integer32	read-only	The rising threshold.
I32 sleRmonSimpleFallingThreshold	1.3.6.1.4.1.6296.101.9.5.1.1.5	Integer32	read-only	The falling threshold.
sleRmonSimpleControl	1.3.6.1.4.1.6296.101.9.5.2
INT sleRmonSimpleControlRequest	1.3.6.1.4.1.6296.101.9.5.2.1	INTEGER	read-write	Description
SLE sleRmonSimpleControlStatus	1.3.6.1.4.1.6296.101.9.5.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleRmonSimpleControlTimer	1.3.6.1.4.1.6296.101.9.5.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleRmonSimpleControlTimeStamp	1.3.6.1.4.1.6296.101.9.5.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleRmonSimpleControlReqResult	1.3.6.1.4.1.6296.101.9.5.2.5	SleControlRequestResultType	read-only	The result of the last user command.
I32 sleRmonSimpleControlPortIndex	1.3.6.1.4.1.6296.101.9.5.2.6	Integer32	read-write	The port index.
INT sleRmonSimpleControlSampleVariable	1.3.6.1.4.1.6296.101.9.5.2.7	INTEGER	read-write	The sample variable type. (255: set all sample variable types)
I32 sleRmonSimpleControlSampleInterval	1.3.6.1.4.1.6296.101.9.5.2.8	Integer32	read-write	The sample interval.(10: minimum)
I32 sleRmonSimpleControlRisingThreshold	1.3.6.1.4.1.6296.101.9.5.2.9	Integer32	read-write	The rising threshold.
I32 sleRmonSimpleControlFallingThreshold	1.3.6.1.4.1.6296.101.9.5.2.10	Integer32	read-write	The falling threshold.
sleRmonSimpleNotification	1.3.6.1.4.1.6296.101.9.5.3
NTF sleRmonSimpleCreated	1.3.6.1.4.1.6296.101.9.5.3.1			createRmonSimple
NTF sleRmonSimpleDeleted	1.3.6.1.4.1.6296.101.9.5.3.2			delRmonSimple
sleRmonSimpleQueue	1.3.6.1.4.1.6296.101.9.6
sleRmonSimpleQueueTable	1.3.6.1.4.1.6296.101.9.6.1		not-accessible	Description.
sleRmonSimpleQueueEntry	1.3.6.1.4.1.6296.101.9.6.1.1		not-accessible	Description.
I32 sleRmonSimpleQueuePortIndex	1.3.6.1.4.1.6296.101.9.6.1.1.1	Integer32	read-only	The port index.
INT sleRmonSimpleQueueSampleVariable	1.3.6.1.4.1.6296.101.9.6.1.1.2	INTEGER	read-only	The sample variable type.
I32 sleRmonSimpleQueueQueueNumber	1.3.6.1.4.1.6296.101.9.6.1.1.3	Integer32	read-only	The queue number 0~7
I32 sleRmonSimpleQueueSampleInterval	1.3.6.1.4.1.6296.101.9.6.1.1.4	Integer32	read-only	The sample interval. (10: minimum)
I32 sleRmonSimpleQueueRisingThreshold	1.3.6.1.4.1.6296.101.9.6.1.1.5	Integer32	read-only	The rising threshold.
I32 sleRmonSimpleQueueFallingThreshold	1.3.6.1.4.1.6296.101.9.6.1.1.6	Integer32	read-only	The falling threshold.
sleRmonSimpleQueueControl	1.3.6.1.4.1.6296.101.9.6.2
INT sleRmonSimpleQueueControlRequest	1.3.6.1.4.1.6296.101.9.6.2.1	INTEGER	read-write	Description
SLE sleRmonSimpleQueueControlStatus	1.3.6.1.4.1.6296.101.9.6.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleRmonSimpleQueueControlTimer	1.3.6.1.4.1.6296.101.9.6.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleRmonSimpleQueueControlTimeStamp	1.3.6.1.4.1.6296.101.9.6.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleRmonSimpleQueueControlReqResult	1.3.6.1.4.1.6296.101.9.6.2.5	SleControlRequestResultType	read-only	The result of the last user command.
I32 sleRmonSimpleQueueControlPortIndex	1.3.6.1.4.1.6296.101.9.6.2.6	Integer32	read-write	The port index.
INT sleRmonSimpleQueueControlSampleVariable	1.3.6.1.4.1.6296.101.9.6.2.7	INTEGER	read-write	The sample variable type.
I32 sleRmonSimpleQueueControlQueueNumber	1.3.6.1.4.1.6296.101.9.6.2.8	Integer32	read-write	The queue number 0~7
I32 sleRmonSimpleQueueControlSampleInterval	1.3.6.1.4.1.6296.101.9.6.2.9	Integer32	read-write	The sample interval. (10: minimum)
I32 sleRmonSimpleQueueControlRisingThreshold	1.3.6.1.4.1.6296.101.9.6.2.10	Integer32	read-write	The rising threshold.
I32 sleRmonSimpleQueueControlFallingThreshold	1.3.6.1.4.1.6296.101.9.6.2.11	Integer32	read-write	The falling threshold.
sleRmonSimpleQueueNotification	1.3.6.1.4.1.6296.101.9.6.3
NTF sleRmonSimpleQueueCreated	1.3.6.1.4.1.6296.101.9.6.3.1			createRmonSimpleQueue
NTF sleRmonSimpleQueueDeleted	1.3.6.1.4.1.6296.101.9.6.3.2			createRmonSimpleQueue
sleRmonGroup	1.3.6.1.4.1.6296.101.9.7			Description.
sleRmonNotificationGroup	1.3.6.1.4.1.6296.101.9.8			Description.

RFC description

SLE RMON (Remote Monitoring) MIB containing RMON features and monitoring information.

Start monitoring DASAN SLE platform equipment, RMON (history/alarm collection configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-RMON-MIB

What Is SLE-RMON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description