All MIBs › SLE-RMON-MIB › sleEtherStatsOctets
sleEtherStatsOctets
Module: SLE-RMON-MIB
OID (symbolic): SLE-RMON-MIB::sleEtherStatsOctets
OID (numeric): 1.3.6.1.4.1.6296.101.9.4.1.1.1.4
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
This object can be used as a reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows:
Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000
The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
What is sleEtherStatsOctets?
Total octets of Ethernet traffic received on this segment, including bad packets but excluding framing bits. Sampled before and after an interval alongside sleEtherStatsPkts, it's what the standard RMON utilization formula (Pkts*16 + Octets*0.8, divided by interval*10000) is built from to estimate segment utilization.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.9.4.1.1.1.4 snmpwalk -v2c -c public <target> SLE-RMON-MIB::sleEtherStatsOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.9.4.1.1.1.4.1 snmpget -v2c -c public <target> SLE-RMON-MIB::sleEtherStatsOctets.1
Start monitoring DASAN SLE platform equipment, RMON (history/alarm collection configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-RMON-MIB::sleEtherStatsOctets OID value, configure state conditions and alerts, and monitor any DASAN SLE platform equipment, RMON (history/alarm collection configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6296 | dasan | DASAN-DHCP-MIB |
| 1.3.6.1.4.1.6296.101 | sleMgmt | DASAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6296.101.9 | sleRmon | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4 | sleStatistics | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1 | sleEtherStats | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1 | sleEtherStatsTable | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1 | sleEtherStatsEntry | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.4 | sleEtherStatsOctets | SLE-RMON-MIB |