All MIBs › SLE-RMON-MIB › sleEtherStatsDataSource
sleEtherStatsDataSource
Module: SLE-RMON-MIB
OID (symbolic): SLE-RMON-MIB::sleEtherStatsDataSource
OID (numeric): 1.3.6.1.4.1.6296.101.9.4.1.1.1.2
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-only
Description: This object identifies the source of the data that this sleEtherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573 [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets on the local network segment attached to the identified interface.
An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry.
This object may not be modified if the associated sleEtherStatsStatus object is equal to valid(1).
What is sleEtherStatsDataSource?
The OBJECT IDENTIFIER of the ifIndex instance this Ethernet statistics entry is collecting from, e.g. ifIndex.1 for interface 1; the counters reflect all traffic on that interface's local segment and this field can't be changed while the entry is valid(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.9.4.1.1.1.2 snmpwalk -v2c -c public <target> SLE-RMON-MIB::sleEtherStatsDataSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.9.4.1.1.1.2.1 snmpget -v2c -c public <target> SLE-RMON-MIB::sleEtherStatsDataSource.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sleEtherStatsDataSource.1
Start monitoring DASAN SLE platform equipment, RMON (history/alarm collection configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-RMON-MIB::sleEtherStatsDataSource OID value, configure state conditions and alerts, and monitor any DASAN SLE platform equipment, RMON (history/alarm collection configuration) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6296 | dasan | DASAN-DHCP-MIB |
| 1.3.6.1.4.1.6296.101 | sleMgmt | DASAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6296.101.9 | sleRmon | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4 | sleStatistics | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1 | sleEtherStats | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1 | sleEtherStatsTable | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1 | sleEtherStatsEntry | SLE-RMON-MIB |
| 1.3.6.1.4.1.6296.101.9.4.1.1.1.2 | sleEtherStatsDataSource | SLE-RMON-MIB |