SLE-QOS-MIB

All MIBs › SLE-QOS-MIB

Organization: Hanasoft.

Last Updated: 2004-12-09

Category: DASAN Networks SLE OLT Management, Quality of Service

Description: Manages Hanasoft SLE OLT QoS policy configuration including traffic classification, marking, and scheduling.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-QOS-MIB?

SLE-QOS-MIB is a vendor MIB from Hanasoft for Quality of Service policy management on the SLE-series OLT platform, covering traffic classification, marking, and scheduling used to prioritize subscriber or service traffic in a fiber access network. It is expected to expose QoS policy configuration objects controlling how traffic is classified and queued. No sample objects were supplied for grounding, so specific object names cannot be listed, but its purpose implies monitoring of configured QoS policy state as an aspect of software/configuration status on the device. It depends conceptually on standard QoS/DiffServ concepts (classification, marking, scheduling) common across networking MIBs. It is deployed on SLE OLTs in fiber access networks needing differentiated traffic handling for services like voice, video, and data. Engineers can download the SLE-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Zhone / DZS SLE-series GPON/EPON OLT platforms

Monitoring Examples

This MIB's sample objects were not provided, so a concrete polling scenario using real object names cannot be responsibly constructed. In general, an operator would review configured QoS classification and scheduling policies to confirm traffic is being marked and prioritized as intended, and would investigate mismatched configuration if certain services experience unexpected congestion.

What Can Be Monitored

QoS classification policy
traffic marking configuration
scheduling/queue configuration

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleQoS	1.3.6.1.4.1.6296.101.10			Description.
sleQoSBase	1.3.6.1.4.1.6296.101.10.1
sleQoSBaseInfo	1.3.6.1.4.1.6296.101.10.1.1
U32 sleQosUserFlowNum	1.3.6.1.4.1.6296.101.10.1.1.1	Unsigned32	read-only	Description.
U32 sleQosTrafficProfileNum	1.3.6.1.4.1.6296.101.10.1.1.2	Unsigned32	read-only	Description.
U32 sleQosCounterNum	1.3.6.1.4.1.6296.101.10.1.1.3	Unsigned32	read-only	Description.
U32 sleQosQueueNum	1.3.6.1.4.1.6296.101.10.1.1.4	Unsigned32	read-only	Description.
I32 sleQosColorMarkingProfileNum	1.3.6.1.4.1.6296.101.10.1.1.5	Integer32	read-only	Description.
INT sleQosRuleMode	1.3.6.1.4.1.6296.101.10.1.1.6	INTEGER	read-only	Description.
sleQoSBaseControl	1.3.6.1.4.1.6296.101.10.1.2
INT sleQoSBaseControlRequest	1.3.6.1.4.1.6296.101.10.1.2.1	INTEGER	read-write	Description.
SLE sleQoSBaseControlStatus	1.3.6.1.4.1.6296.101.10.1.2.2	SleControlStatusType	read-only	Description.
G32 sleQoSBaseControlTimer	1.3.6.1.4.1.6296.101.10.1.2.3	Gauge32	read-write	Description.
TIK sleQoSBaseControlTimeStamp	1.3.6.1.4.1.6296.101.10.1.2.4	TimeTicks	read-only	Description.
SLE sleQoSBaseControlReqResult	1.3.6.1.4.1.6296.101.10.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleQoSBaseControlRuleMode	1.3.6.1.4.1.6296.101.10.1.2.6	INTEGER	read-write	Description.
sleQoSBaseNotification	1.3.6.1.4.1.6296.101.10.1.3
NTF sleQoSBaseRuleModeChanged	1.3.6.1.4.1.6296.101.10.1.3.1			Description.
sleTrafficProfile	1.3.6.1.4.1.6296.101.10.2
sleTrafficProfileTable	1.3.6.1.4.1.6296.101.10.2.1		not-accessible	Description.
sleTrafficProfileEntry	1.3.6.1.4.1.6296.101.10.2.1.1		not-accessible	Description.
U32 sleTrafficProfileIndex	1.3.6.1.4.1.6296.101.10.2.1.1.1	Unsigned32	read-only	meter Index
I32 sleTrafficProfileMinBandwidth	1.3.6.1.4.1.6296.101.10.2.1.1.2	Integer32	read-only	The value is in unit for 64 kbps
I32 sleTrafficProfileMaxBandwidth	1.3.6.1.4.1.6296.101.10.2.1.1.3	Integer32	read-only	The value is in unit for 64 kbps
I32 sleTrafficProfileMaxBurstSize	1.3.6.1.4.1.6296.101.10.2.1.1.4	Integer32	read-only	The size of the bucket used for metering
I32 sleTrafficProfileUseCount	1.3.6.1.4.1.6296.101.10.2.1.1.5	Integer32	read-only	Description.
sleTrafficProfileControl	1.3.6.1.4.1.6296.101.10.2.2
SLE sleTrafficProfileControlRequest	1.3.6.1.4.1.6296.101.10.2.2.1	SleTrafficProfileControlRequestType	read-write	Description.
SLE sleTrafficProfileControlStatus	1.3.6.1.4.1.6296.101.10.2.2.2	SleControlStatusType	read-only	Description.
G32 sleTrafficProfileControlTimer	1.3.6.1.4.1.6296.101.10.2.2.3	Gauge32	read-write	Description.
TIK sleTrafficProfileControlTimeStamp	1.3.6.1.4.1.6296.101.10.2.2.4	TimeTicks	read-only	Description.
SLE sleTrafficProfileControlReqResult	1.3.6.1.4.1.6296.101.10.2.2.5	SleControlRequestResultType	read-only	Result of last command
I32 sleTrafficProfileControlIndex	1.3.6.1.4.1.6296.101.10.2.2.6	Integer32	read-write	meter Index
I32 sleTrafficProfileControlMinBandwidth	1.3.6.1.4.1.6296.101.10.2.2.7	Integer32	read-write	The value is in unit for 64 kbps
I32 sleTrafficProfileControlMaxBandwidth	1.3.6.1.4.1.6296.101.10.2.2.8	Integer32	read-write	The value is in unit for 64 kbps
I32 sleTrafficProfileControlMaxBurstSize	1.3.6.1.4.1.6296.101.10.2.2.9	Integer32	read-write	The size of the bucket used for metering
sleTrafficProfileNotification	1.3.6.1.4.1.6296.101.10.2.3
NTF sleTrafficProfileChanged	1.3.6.1.4.1.6296.101.10.2.3.1			Description.
sleUserFlow	1.3.6.1.4.1.6296.101.10.3
sleUserFlowTable	1.3.6.1.4.1.6296.101.10.3.1		not-accessible	Description.
sleUserFlowEntry	1.3.6.1.4.1.6296.101.10.3.1.1		not-accessible	Description.
OCT sleUserFlowName	1.3.6.1.4.1.6296.101.10.3.1.1.1	OCTET STRING	read-only	The name of this user flow.
OCT sleUserFlowIngressPorts	1.3.6.1.4.1.6296.101.10.3.1.1.2	OCTET STRING	read-only	Ingress port number
OCT sleUserFlowEgressPorts	1.3.6.1.4.1.6296.101.10.3.1.1.3	OCTET STRING	read-only	Egress Port Number
I32 sleUserFlowEthernetType	1.3.6.1.4.1.6296.101.10.3.1.1.4	Integer32	read-only	The ethernet type value in incoming frames
OCT sleUserFlowSrcMacAddr	1.3.6.1.4.1.6296.101.10.3.1.1.5	OCTET STRING	read-only	Source MAC address
OCT sleUserFlowDstMacAddr	1.3.6.1.4.1.6296.101.10.3.1.1.6	OCTET STRING	read-only	Destination MAC address
I32 sleUserFlowVlan	1.3.6.1.4.1.6296.101.10.3.1.1.7	Integer32	read-only	VLAN ID
I32 sleUserFlow8021p	1.3.6.1.4.1.6296.101.10.3.1.1.8	Integer32	read-only	The value of the IEEE802.1p priority in the packet
IP sleUserFlowSrcIpAddr	1.3.6.1.4.1.6296.101.10.3.1.1.9	IpAddress	read-only	The IP address to match against the packet's source IP address.
I32 sleUserFlowSrcPrefixLength	1.3.6.1.4.1.6296.101.10.3.1.1.10	Integer32	read-only	Subnet mask. The length of 0 indicates a match of any address
IP sleUserFlowDstIpAddr	1.3.6.1.4.1.6296.101.10.3.1.1.11	IpAddress	read-only	The IP address to match against the packet's destination IP address.
I32 sleUserFlowDstPrefixLength	1.3.6.1.4.1.6296.101.10.3.1.1.12	Integer32	read-only	Subnet mask. The length of 0 indicates a match of any address
INT sleUserFlowIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.1.1.13	INTEGER	read-only	Description.
I32 sleUserFlowIpPktPriority	1.3.6.1.4.1.6296.101.10.3.1.1.14	Integer32	read-only	The Priority value in incoming IP packet. If sleUserFlowIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowIpPktPriorityType is 3, this value's range is 0-255.
I32 sleUserFlowProtocolType	1.3.6.1.4.1.6296.101.10.3.1.1.15	Integer32	read-only	The IP protocol type value
BIT sleUserFlowTcpFlag	1.3.6.1.4.1.6296.101.10.3.1.1.16	Bits	read-only	TCP Flags
I32 sleUserFlowSrcL4Port	1.3.6.1.4.1.6296.101.10.3.1.1.17	Integer32	read-only	The source L4 port number, only valid for TCP or UDP packets.
I32 sleUserFlowDstL4Port	1.3.6.1.4.1.6296.101.10.3.1.1.18	Integer32	read-only	The destination L4 port number, only valid for TCP or UDP packets.
I32 sleUserFlowPktLen	1.3.6.1.4.1.6296.101.10.3.1.1.19	Integer32	read-only	The packet length of the incoming packet
BIT sleUserFlowValidFlags	1.3.6.1.4.1.6296.101.10.3.1.1.20	Bits	read-only	User Flow Valid Flags
BIT sleUserFlowMatchFlags	1.3.6.1.4.1.6296.101.10.3.1.1.21	Bits	read-only	User Flow Matching Flags
INT sleUserFlowPriority	1.3.6.1.4.1.6296.101.10.3.1.1.22	INTEGER	read-only	The priority of this user flow
I32 sleUserFlowMatchCounterId	1.3.6.1.4.1.6296.101.10.3.1.1.23	Integer32	read-only	The counter index to be apply for the matched packets.
I32 sleUserFlowMatchTrafficProfileId	1.3.6.1.4.1.6296.101.10.3.1.1.24	Integer32	read-only	The traffic profile index to be apply for the matched packets.
I32 sleUserFlowMatchQueue	1.3.6.1.4.1.6296.101.10.3.1.1.25	Integer32	read-only	TThe CoS value to be assign for the nomatched packets
INT sleUserFlowMatchIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.1.1.26	INTEGER	read-only	The Priority type to be applied to incoming IP packet.
I32 sleUserFlowMatchIpPktPriority	1.3.6.1.4.1.6296.101.10.3.1.1.27	Integer32	read-only	The Priority value in incoming IP packet. If sleUserFlowMatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowMatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowMatchIpPktPriorityType is 3, then this value's range is 0-255.
I32 sleUserFlowMatchRedirPort	1.3.6.1.4.1.6296.101.10.3.1.1.28	Integer32	read-only	The port to redirect to a matched packet.
I32 sleUserFlowMatchVid	1.3.6.1.4.1.6296.101.10.3.1.1.29	Integer32	read-only	The vlan id to be assigned for the matched packets
OCT sleUserFlowMatchDstMac	1.3.6.1.4.1.6296.101.10.3.1.1.30	OCTET STRING	read-only	Description.
OCT sleUserFlowMatchPortMap	1.3.6.1.4.1.6296.101.10.3.1.1.31	OCTET STRING	read-only	Description.
INT sleUserFlowMatchEgressType	1.3.6.1.4.1.6296.101.10.3.1.1.32	INTEGER	read-only	Description.
BIT sleUserFlowMatchAction	1.3.6.1.4.1.6296.101.10.3.1.1.33	Bits	read-only	The action to be apply for matched packets.
I32 sleUserFlowNomatchCounterId	1.3.6.1.4.1.6296.101.10.3.1.1.34	Integer32	read-only	The counter index to be apply for the nomatched packets.
I32 sleUserFlowNomatchTrafficProfileId	1.3.6.1.4.1.6296.101.10.3.1.1.35	Integer32	read-only	The traffic profile index to be apply for the nomatched packets.
I32 sleUserFlowNomatchQueue	1.3.6.1.4.1.6296.101.10.3.1.1.36	Integer32	read-only	The CoS value to be assign for the nomatched packets
INT sleUserFlowNomatchIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.1.1.37	INTEGER	read-only	The Priority type to be applied to incoming IP packet, in case nomatched.
I32 sleUserFlowNomatchIpPktPriority	1.3.6.1.4.1.6296.101.10.3.1.1.38	Integer32	read-only	The Priority value in incoming IP packet. If sleUserFlowNomatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowNomatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowNomatchIpPktPriorityType is 3, then this value's range is 0-255.
I32 sleUserFlowNomatchRedirPort	1.3.6.1.4.1.6296.101.10.3.1.1.39	Integer32	read-only	The port to redirect to nomatched packet.
I32 sleUserFlowNomatchVid	1.3.6.1.4.1.6296.101.10.3.1.1.40	Integer32	read-only	The vlan id to be assigned for the nomatched packets
BIT sleUserFlowNomatchAction	1.3.6.1.4.1.6296.101.10.3.1.1.41	Bits	read-only	The action to be apply for nomatched packets.
I32 sleUserFlowMatchColorMarkingId	1.3.6.1.4.1.6296.101.10.3.1.1.42	Integer32	read-only	The colormarking profile index to be apply for the matched packet.
I32 sleUserFlowNomatchColorMarkingId	1.3.6.1.4.1.6296.101.10.3.1.1.43	Integer32	read-only	The colormarking profile index to be apply for the unmatched packet. (not supported)
I32 sleUserFlowInnerVlan	1.3.6.1.4.1.6296.101.10.3.1.1.44	Integer32	read-only	Inner VLAN ID in QinQ
I32 sleUserFlowInner8021p	1.3.6.1.4.1.6296.101.10.3.1.1.45	Integer32	read-only	The value of the inner IEEE802.1p priority in the packet
IP sleUserFlowMatchRoutePrimary	1.3.6.1.4.1.6296.101.10.3.1.1.46	IpAddress	read-only	The policy-based-routing primary route
IP sleUserFlowMatchRouteSecondary	1.3.6.1.4.1.6296.101.10.3.1.1.47	IpAddress	read-only	The policy-based-routing secondary route
sleUserFlowControl	1.3.6.1.4.1.6296.101.10.3.2
SLE sleUserFlowControlReqest	1.3.6.1.4.1.6296.101.10.3.2.1	SleUserFlowControlRequestType	read-write	Description.
SLE sleUserFlowControlStatus	1.3.6.1.4.1.6296.101.10.3.2.2	SleControlStatusType	read-only	Description.
G32 sleUserFlowControlTimer	1.3.6.1.4.1.6296.101.10.3.2.3	Gauge32	read-write	Description.
TIK sleUserFlowControlTimeStamp	1.3.6.1.4.1.6296.101.10.3.2.4	TimeTicks	read-only	Description.
SLE sleUserFlowControlReqResult	1.3.6.1.4.1.6296.101.10.3.2.5	SleControlRequestResultType	read-only	Description.
OCT sleUserFlowControlName	1.3.6.1.4.1.6296.101.10.3.2.6	OCTET STRING	read-write	Description.
OCT sleUserFlowControlIngressPorts	1.3.6.1.4.1.6296.101.10.3.2.7	OCTET STRING	read-write	Ingress port
OCT sleUserFlowControlEgressPorts	1.3.6.1.4.1.6296.101.10.3.2.8	OCTET STRING	read-write	Egress port
I32 sleUserFlowControlEthernetType	1.3.6.1.4.1.6296.101.10.3.2.9	Integer32	read-write	Description.
OCT sleUserFlowControlSrcMacAddr	1.3.6.1.4.1.6296.101.10.3.2.10	OCTET STRING	read-write	Source MAC address
OCT sleUserFlowControlDstMacAddr	1.3.6.1.4.1.6296.101.10.3.2.11	OCTET STRING	read-write	Destination MAC address
I32 sleUserFlowControlVlan	1.3.6.1.4.1.6296.101.10.3.2.12	Integer32	read-write	Vlan ID
I32 sleUserFlowControl8021p	1.3.6.1.4.1.6296.101.10.3.2.13	Integer32	read-write	The value of the IEEE802.1p priority in the packet
IP sleUserFlowControlSrcIpAddr	1.3.6.1.4.1.6296.101.10.3.2.14	IpAddress	read-write	The IP address to match against the packet's source IP address.
I32 sleUserFlowControlSrcPrefixLength	1.3.6.1.4.1.6296.101.10.3.2.15	Integer32	read-write	Subnet mask. The length of 0 indicates a match of any address
IP sleUserFlowControlDstIpAddr	1.3.6.1.4.1.6296.101.10.3.2.16	IpAddress	read-write	The IP address to match against the packet's destination IP address.
I32 sleUserFlowControlDstPrefixLength	1.3.6.1.4.1.6296.101.10.3.2.17	Integer32	read-write	Subnet mask. The length of 0 indicates a match of any address
INT sleUserFlowControlIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.2.18	INTEGER	read-write	Description.
I32 sleUserFlowControlIpPktPriority	1.3.6.1.4.1.6296.101.10.3.2.19	Integer32	read-write	The Priority value in incoming IP packet. If sleUserFlowControlIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowControlIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowControlIpPktPriorityType is 3, this value's range is 0-255.
I32 sleUserFlowControlProtocolType	1.3.6.1.4.1.6296.101.10.3.2.20	Integer32	read-write	The IP protocol type value
BIT sleUserFlowControlTcpFlag	1.3.6.1.4.1.6296.101.10.3.2.21	Bits	read-write	Description.
I32 sleUserFlowControlSrcL4Port	1.3.6.1.4.1.6296.101.10.3.2.22	Integer32	read-write	The source L4 port number, only valid for TCP or UDP packets.
I32 sleUserFlowControlDstL4Port	1.3.6.1.4.1.6296.101.10.3.2.23	Integer32	read-write	The destination L4 port number, only valid for TCP or UDP packets.
I32 sleUserFlowControlPktLen	1.3.6.1.4.1.6296.101.10.3.2.24	Integer32	read-write	The packet length of the incoming packet
BIT sleUserFlowControlValidFlag	1.3.6.1.4.1.6296.101.10.3.2.25	Bits	read-write	The ICMP type, only valid for ICMP packets.
BIT sleUserFlowControlMatchFlag	1.3.6.1.4.1.6296.101.10.3.2.26	Bits	read-write	The ICMP code, only valid for ICMP packets.
INT sleUserFlowControlPriority	1.3.6.1.4.1.6296.101.10.3.2.27	INTEGER	read-write	The priority of this user flow
I32 sleUserFlowControlMatchCounterId	1.3.6.1.4.1.6296.101.10.3.2.28	Integer32	read-write	The counter index to be apply for the matched packets.
I32 sleUserFlowControlMatchTrafficProfileId	1.3.6.1.4.1.6296.101.10.3.2.29	Integer32	read-write	The traffic profile index to be apply for the matched packets.
I32 sleUserFlowControlMatchQueue	1.3.6.1.4.1.6296.101.10.3.2.30	Integer32	read-write	The CoS value to be assign for the matched packets
INT sleUserFlowControlMatchIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.2.31	INTEGER	read-write	Description.
I32 sleUserFlowControlMatchIpPktPriority	1.3.6.1.4.1.6296.101.10.3.2.32	Integer32	read-write	The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
I32 sleUserFlowControlMatchRedirPort	1.3.6.1.4.1.6296.101.10.3.2.33	Integer32	read-write	The port to redirect to a matched packet.
I32 sleUserFlowControlMatchVid	1.3.6.1.4.1.6296.101.10.3.2.34	Integer32	read-write	The vlan id to be assigned for the matched packets
OCT sleUserFlowControlMatchDstMac	1.3.6.1.4.1.6296.101.10.3.2.35	OCTET STRING	read-write	Description.
OCT sleUserFlowControlMatchPortMap	1.3.6.1.4.1.6296.101.10.3.2.36	OCTET STRING	read-write	Description.
INT sleUserFlowControlMatchEgressType	1.3.6.1.4.1.6296.101.10.3.2.37	INTEGER	read-write	Description.
BIT sleUserFlowControlMatchAction	1.3.6.1.4.1.6296.101.10.3.2.38	Bits	read-write	The action to be apply for matched packets.
I32 sleUserFlowControlNomatchCounterId	1.3.6.1.4.1.6296.101.10.3.2.39	Integer32	read-write	The counter index to be apply for the unmatched packets.
I32 sleUserFlowControlNomatchTrafficProfileId	1.3.6.1.4.1.6296.101.10.3.2.40	Integer32	read-write	The traffic profile index to be apply for the unmatched packets.
I32 sleUserFlowControlNomatchQueue	1.3.6.1.4.1.6296.101.10.3.2.41	Integer32	read-write	The CoS value to be assign for the unmatched packets
INT sleUserFlowControlNomatchIpPktPriorityType	1.3.6.1.4.1.6296.101.10.3.2.42	INTEGER	read-write	Description.
I32 sleUserFlowControlNomatchIpPktPriority	1.3.6.1.4.1.6296.101.10.3.2.43	Integer32	read-write	The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
I32 sleUserFlowControlNomatchRedirPort	1.3.6.1.4.1.6296.101.10.3.2.44	Integer32	read-write	The port to redirect a unmatched packet.
I32 sleUserFlowControlNomatchVid	1.3.6.1.4.1.6296.101.10.3.2.45	Integer32	read-write	The vlan id to be assigned for the unmatched packets
BIT sleUserFlowControlNomatchAction	1.3.6.1.4.1.6296.101.10.3.2.46	Bits	read-write	The action to be apply for unmatched packets.
I32 sleUserFlowControlMatchColorMarkingId	1.3.6.1.4.1.6296.101.10.3.2.47	Integer32	read-write	The color marking profile index to be apply for the matched packet.
I32 sleUserFlowControlNomatchColorMarkingId	1.3.6.1.4.1.6296.101.10.3.2.48	Integer32	read-write	The color marking profile index to be apply for the nomatched packet.
I32 sleUserFlowControlInnerVlan	1.3.6.1.4.1.6296.101.10.3.2.49	Integer32	read-write	Inner VLAN ID
I32 sleUserFlowControlInner8021p	1.3.6.1.4.1.6296.101.10.3.2.50	Integer32	read-write	The value of the Inner IEEE802.1p priority in the packet
IP sleUserFlowControlMatchRoutePrimary	1.3.6.1.4.1.6296.101.10.3.2.51	IpAddress	read-write	Description.
IP sleUserFlowControlMatchRouteSecondary	1.3.6.1.4.1.6296.101.10.3.2.52	IpAddress	read-write	Description.
sleUserFlowNotification	1.3.6.1.4.1.6296.101.10.3.3
NTF sleUserFlowCreated	1.3.6.1.4.1.6296.101.10.3.3.1			Description.
NTF sleUserFlowDestroyed	1.3.6.1.4.1.6296.101.10.3.3.2			Description.
NTF sleUserFlowClassifierProfileChanged	1.3.6.1.4.1.6296.101.10.3.3.3			Description.
NTF sleUserFlowMatchActionProfileChanged	1.3.6.1.4.1.6296.101.10.3.3.4			Description.
NTF sleUserFlowNomatchActionProfileChanged	1.3.6.1.4.1.6296.101.10.3.3.5			Description.
slePortSchedule	1.3.6.1.4.1.6296.101.10.4
slePortSchedultTable	1.3.6.1.4.1.6296.101.10.4.1		not-accessible	Description.
slePortSchedultEntry	1.3.6.1.4.1.6296.101.10.4.1.1		not-accessible	Description.
I32 slePortSchedulInterfaceIndex	1.3.6.1.4.1.6296.101.10.4.1.1.1	Integer32	read-only	Interface Index
INT slePortScheduleMode	1.3.6.1.4.1.6296.101.10.4.1.1.2	INTEGER	read-only	The scheduling mode of port
slePortScheduleControl	1.3.6.1.4.1.6296.101.10.4.2
SLE slePortScheduleControlRequest	1.3.6.1.4.1.6296.101.10.4.2.1	SlePortScheduleControlRequestType	read-write	Description.
SLE sleScheduleControlStatus	1.3.6.1.4.1.6296.101.10.4.2.2	SleControlStatusType	read-only	Description.
G32 slePortScheduleControlTimer	1.3.6.1.4.1.6296.101.10.4.2.3	Gauge32	read-write	Description.
TIK slePortScheduleControlTimeStamp	1.3.6.1.4.1.6296.101.10.4.2.4	TimeTicks	read-only	Description.
SLE slePortScheduleControlReqResult	1.3.6.1.4.1.6296.101.10.4.2.5	SleControlRequestResultType	read-only	Description.
I32 slePortScheduleControlInterfaceIndex	1.3.6.1.4.1.6296.101.10.4.2.6	Integer32	read-write	Interface Index
INT slePortScheduleControlMode	1.3.6.1.4.1.6296.101.10.4.2.7	INTEGER	read-write	The scheduling mode of port
slePortScheduleNotification	1.3.6.1.4.1.6296.101.10.4.3
NTF slePortScheduleModeChanged	1.3.6.1.4.1.6296.101.10.4.3.1			Description.
sleQueue	1.3.6.1.4.1.6296.101.10.5
sleQueueTable	1.3.6.1.4.1.6296.101.10.5.1		not-accessible	Description.
sleQueueEntry	1.3.6.1.4.1.6296.101.10.5.1.1		not-accessible	Description.
I32 sleQueueId	1.3.6.1.4.1.6296.101.10.5.1.1.1	Integer32	read-only	queue index
INT sleQueueREDEnable	1.3.6.1.4.1.6296.101.10.5.1.1.2	INTEGER	read-only	Description.
BIT sleQueueMappedCoS	1.3.6.1.4.1.6296.101.10.5.1.1.3	Bits	read-only	Description.
I32 sleQueueWREDMinThreshold	1.3.6.1.4.1.6296.101.10.5.1.1.4	Integer32	read-only	The total number of packets where WRED can start
I32 sleQueueWREDMaxThreshold	1.3.6.1.4.1.6296.101.10.5.1.1.5	Integer32	read-only	Above max threshold, queue drops all ingress
I32 sleQueueWREDProbMax	1.3.6.1.4.1.6296.101.10.5.1.1.6	Integer32	read-only	The worst case random drop probability
I32 sleQueueMinBandwidth	1.3.6.1.4.1.6296.101.10.5.1.1.7	Integer32	read-only	The value is unit of 64kbps
I32 sleQueueMaxBandwidth	1.3.6.1.4.1.6296.101.10.5.1.1.8	Integer32	read-only	The value is unit of 64 kbps.
I32 sleQueueWeight	1.3.6.1.4.1.6296.101.10.5.1.1.9	Integer32	read-only	The weight of this queue. The value of -1 is unlimited
I32 sleQueueMaxLatency	1.3.6.1.4.1.6296.101.10.5.1.1.10	Integer32	read-only	Description.
I32 sleQueueMaxPackets	1.3.6.1.4.1.6296.101.10.5.1.1.11	Integer32	read-only	Description.
INT sleQueueQuantum	1.3.6.1.4.1.6296.101.10.5.1.1.12	INTEGER	read-only	The DRR quantum value.
C32 sleQueueUsedPkts	1.3.6.1.4.1.6296.101.10.5.1.1.13	Counter32	read-only	The used packets of port/queue.
C32 sleQueueUsedBytes	1.3.6.1.4.1.6296.101.10.5.1.1.14	Counter32	read-only	The used bytes of port/queue.
sleQueueControl	1.3.6.1.4.1.6296.101.10.5.2
INT sleQueueControlRequest	1.3.6.1.4.1.6296.101.10.5.2.1	INTEGER	read-write	Description.
I32 sleQueueControlStatus	1.3.6.1.4.1.6296.101.10.5.2.2	Integer32	read-only	Description.
G32 sleQueueControlTimer	1.3.6.1.4.1.6296.101.10.5.2.3	Gauge32	read-write	Description.
I32 sleQueueControlTimeStamp	1.3.6.1.4.1.6296.101.10.5.2.4	Integer32	read-only	Description.
SLE sleQueueControlReqResult	1.3.6.1.4.1.6296.101.10.5.2.5	SleControlRequestResultType	read-only	Description.
I32 sleQueueControlInterfaceIndex	1.3.6.1.4.1.6296.101.10.5.2.6	Integer32	read-write	Interface Index
I32 sleQueueControlId	1.3.6.1.4.1.6296.101.10.5.2.7	Integer32	read-write	Queue index
INT sleQueueControlREDEnable	1.3.6.1.4.1.6296.101.10.5.2.8	INTEGER	read-write	Description.
BIT sleQueueControlMappedCoS	1.3.6.1.4.1.6296.101.10.5.2.9	Bits	read-write	Description.
I32 sleQueueControlWREDMinThreshold	1.3.6.1.4.1.6296.101.10.5.2.10	Integer32	read-write	The total number of packets where WRED can start
I32 sleQueueControlWREDMaxThreshold	1.3.6.1.4.1.6296.101.10.5.2.11	Integer32	read-write	Above max threshold, queue drops all ingress
I32 sleQueueControlWREDProbMax	1.3.6.1.4.1.6296.101.10.5.2.12	Integer32	read-write	The worst case random drop probability
I32 sleQueueControlMinBandwidth	1.3.6.1.4.1.6296.101.10.5.2.13	Integer32	read-write	The value is unit of 64kbps
I32 sleQueueControlMaxBandwidth	1.3.6.1.4.1.6296.101.10.5.2.14	Integer32	read-write	The value is unit of 64kbps
I32 sleQueueControlWeight	1.3.6.1.4.1.6296.101.10.5.2.15	Integer32	read-write	The weight of this queue. The value of -1 is unlimited
I32 sleQueueControlMaxLatency	1.3.6.1.4.1.6296.101.10.5.2.16	Integer32	read-write	Description.
I32 sleQueueControlMaxPackets	1.3.6.1.4.1.6296.101.10.5.2.17	Integer32	read-write	Description.
INT sleQueueControlQuantum	1.3.6.1.4.1.6296.101.10.5.2.18	INTEGER	read-write	The DRR quantum value.
sleQueueNotification	1.3.6.1.4.1.6296.101.10.5.3
NTF sleQueueProfileChanged	1.3.6.1.4.1.6296.101.10.5.3.1			Description.
NTF sleQueueQuantumChanged	1.3.6.1.4.1.6296.101.10.5.3.2			Description.
sleCounter	1.3.6.1.4.1.6296.101.10.6
sleCounterTable	1.3.6.1.4.1.6296.101.10.6.1		not-accessible	Description.
sleCounterEntry	1.3.6.1.4.1.6296.101.10.6.1.1		not-accessible	Description.
INT sleCounterIndex	1.3.6.1.4.1.6296.101.10.6.1.1.1	INTEGER	read-only	The Counter Index
U32 sleCounterPackets	1.3.6.1.4.1.6296.101.10.6.1.1.2	Unsigned32	read-only	Number of packets
sleCounterControl	1.3.6.1.4.1.6296.101.10.6.2
INT sleCounterControlRequest	1.3.6.1.4.1.6296.101.10.6.2.1	INTEGER	read-write	Description.
SLE sleCounterControlStatus	1.3.6.1.4.1.6296.101.10.6.2.2	SleControlStatusType	read-only	Description.
G32 sleCounterControlTimer	1.3.6.1.4.1.6296.101.10.6.2.3	Gauge32	read-write	Description.
TIK sleCounterControlTimeStamp	1.3.6.1.4.1.6296.101.10.6.2.4	TimeTicks	read-only	Description.
SLE sleCounterControlReqResult	1.3.6.1.4.1.6296.101.10.6.2.5	SleControlRequestResultType	read-only	Description.
U32 sleCounterControlIndex	1.3.6.1.4.1.6296.101.10.6.2.6	Unsigned32	read-write	Description.
sleCounterNotification	1.3.6.1.4.1.6296.101.10.6.3
NTF sleCounterCleared	1.3.6.1.4.1.6296.101.10.6.3.1			Description.
sleColorMarking	1.3.6.1.4.1.6296.101.10.7
sleColorMarkingTable	1.3.6.1.4.1.6296.101.10.7.1		not-accessible	Description.
sleColorMarkingEntry	1.3.6.1.4.1.6296.101.10.7.1.1		not-accessible	Description.
INT sleColorMarkingIndex	1.3.6.1.4.1.6296.101.10.7.1.1.1	INTEGER	read-only	Color marking table index.
INT sleColorMarkingType	1.3.6.1.4.1.6296.101.10.7.1.1.2	INTEGER	read-only	Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
INT sleColorMarkingMode	1.3.6.1.4.1.6296.101.10.7.1.1.3	INTEGER	read-only	Color marking mode.
INT sleColorMarkingAwareMode	1.3.6.1.4.1.6296.101.10.7.1.1.4	INTEGER	read-only	Color marking aware mode. Used only when sleColorMarkingMode is aware.
I32 sleColorMarkingCIR	1.3.6.1.4.1.6296.101.10.7.1.1.5	Integer32	read-only	Committed Information Rate. The value is in unit for 64 kbps.
I32 sleColorMarkingCBS	1.3.6.1.4.1.6296.101.10.7.1.1.6	Integer32	read-only	Committed Burst Size. The value is in unit for square of 2 bits.
I32 sleColorMarkingPIR	1.3.6.1.4.1.6296.101.10.7.1.1.7	Integer32	read-only	Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. .
I32 sleColorMarkingPBS	1.3.6.1.4.1.6296.101.10.7.1.1.8	Integer32	read-only	Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
I32 sleColorMarkingEBS	1.3.6.1.4.1.6296.101.10.7.1.1.9	Integer32	read-only	Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
BIT sleColorMarkingRedAction	1.3.6.1.4.1.6296.101.10.7.1.1.10	Bits	read-only	The action to be apply when incoming packet is colored in red.
BIT sleColorMarkingYellowAction	1.3.6.1.4.1.6296.101.10.7.1.1.11	Bits	read-only	The action to be apply when incoming packet is colored in yellow.
BIT sleColorMarkingGreenAction	1.3.6.1.4.1.6296.101.10.7.1.1.12	Bits	read-only	The action to be apply when incoming packet is colored in green. (not supported)
I32 sleColorMarkingRedDscp	1.3.6.1.4.1.6296.101.10.7.1.1.13	Integer32	read-only	The dscp value to be apply when incoming packet is colored in red.
I32 sleColorMarkingYellowDscp	1.3.6.1.4.1.6296.101.10.7.1.1.14	Integer32	read-only	The dscp value to be apply when incoming packet is colored in yellow.
I32 sleColorMarkingGreenDscp	1.3.6.1.4.1.6296.101.10.7.1.1.15	Integer32	read-only	The dscp value to be apply when incoming packet is colored in green. (not supported)
I32 sleColorMarkingUseCount	1.3.6.1.4.1.6296.101.10.7.1.1.16	Integer32	read-only	The number of rules used this color marking profile.
sleColorMarkingControl	1.3.6.1.4.1.6296.101.10.7.2
INT sleColorMarkingControlReqest	1.3.6.1.4.1.6296.101.10.7.2.1	INTEGER	read-write	Description.
SLE sleColorMarkingControlStatus	1.3.6.1.4.1.6296.101.10.7.2.2	SleControlStatusType	read-write	Description.
G32 sleColorMarkingControlTimer	1.3.6.1.4.1.6296.101.10.7.2.3	Gauge32	read-write	Description.
TIK sleColorMarkingControlTimeStamp	1.3.6.1.4.1.6296.101.10.7.2.4	TimeTicks	read-only	Description.
SLE sleColorMarkingControlReqResult	1.3.6.1.4.1.6296.101.10.7.2.5	SleControlRequestResultType	read-write	Description.
I32 sleColorMarkingControlIndex	1.3.6.1.4.1.6296.101.10.7.2.6	Integer32	read-write	Color marking table index
INT sleColorMarkingControlType	1.3.6.1.4.1.6296.101.10.7.2.7	INTEGER	read-write	Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
INT sleColorMarkingControlMode	1.3.6.1.4.1.6296.101.10.7.2.8	INTEGER	read-write	Color marking mode
INT sleColorMarkingControlAwareMode	1.3.6.1.4.1.6296.101.10.7.2.9	INTEGER	read-write	Color marking aware mode. Used only when sleColorMarkingControlMode is aware.
I32 sleColorMarkingControlCIR	1.3.6.1.4.1.6296.101.10.7.2.10	Integer32	read-write	Committed Information Rate. The value is in unit for 64 kbps
I32 sleColorMarkingControlCBS	1.3.6.1.4.1.6296.101.10.7.2.11	Integer32	read-write	Committed Burst Size. The value is in unit for square of 2 bits.
I32 sleColorMarkingControlPIR	1.3.6.1.4.1.6296.101.10.7.2.12	Integer32	read-write	Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps.
I32 sleColorMarkingControlPBS	1.3.6.1.4.1.6296.101.10.7.2.13	Integer32	read-write	Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
I32 sleColorMarkingControlEBS	1.3.6.1.4.1.6296.101.10.7.2.14	Integer32	read-write	Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
BIT sleColorMarkingControlRedAction	1.3.6.1.4.1.6296.101.10.7.2.15	Bits	read-write	The action to be apply when incoming packet is colored in red.
BIT sleColorMarkingControlYellowAction	1.3.6.1.4.1.6296.101.10.7.2.16	Bits	read-write	The action to be apply when incoming packet is colored in yellow.
BIT sleColorMarkingControlGreenAction	1.3.6.1.4.1.6296.101.10.7.2.17	Bits	read-write	The action to be apply when incoming packet is colored in green. (not supported)
I32 sleColorMarkingControlRedDscp	1.3.6.1.4.1.6296.101.10.7.2.18	Integer32	read-write	The dscp value to be apply when incoming packet is colored in red.
I32 sleColorMarkingControlYellowDscp	1.3.6.1.4.1.6296.101.10.7.2.19	Integer32	read-write	The dscp value to be apply when incoming packet is colored in yellow.
I32 sleColorMarkingControlGreenDscp	1.3.6.1.4.1.6296.101.10.7.2.20	Integer32	read-write	The dscp value to be apply when incoming packet is colored in green. (not supported)
sleColorMarkingNotification	1.3.6.1.4.1.6296.101.10.7.3
NTF sleColorMarkingProfileChanged	1.3.6.1.4.1.6296.101.10.7.3.1			Description.
sleQoSGroup	1.3.6.1.4.1.6296.101.10.8			Description.
sleQoSControlGroup	1.3.6.1.4.1.6296.101.10.9			Description.
sleQoSNotificationGroup	1.3.6.1.4.1.6296.101.10.11			Description.

RFC description

QoS management for SLE devices, supporting traffic profiles and flow-based actions.

Start monitoring DASAN Zhone (DZS) SLE OLT platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-QOS-MIB

What Is SLE-QOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description