SLE-OSPFv3-MIB

All MIBs › SLE-OSPFv3-MIB

Organization: Organization.

Last Updated: 2014-11-18

Category: DASAN Networks SLE OLT Management, IP Routing Protocols

Description: Manages DASAN Networks SLE OLT OSPFv3 IPv6 routing protocol configuration, areas, and neighbor adjacencies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-OSPFv3-MIB?

SLE-OSPFv3-MIB is a vendor MIB from DASAN Networks for managing the OSPFv3 IPv6 routing protocol on its SLE-series OLT/aggregation platform, covering routing areas, interfaces, and neighbor adjacencies. It is expected to expose OSPFv3 configuration alongside neighbor and area operational state. No sample objects were supplied for grounding, so specific object names cannot be listed, but by its stated purpose it supports monitoring of routing protocol health such as neighbor adjacency state, which is a key software-status indicator for a routing device. It builds directly on the OSPFv3 protocol and likely mirrors or extends the standard IETF OSPFv3 MIB conventions. It is deployed on DASAN SLE OLT/aggregation nodes participating in an IPv6 OSPFv3 routed network. Network engineers evaluating or troubleshooting this functionality can download the SLE-OSPFv3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-OSPFv3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Networks SLE-series OLT/aggregation node

Monitoring Examples

This MIB's sample objects were not provided, so a concrete polling scenario using real object names cannot be responsibly constructed. In general, an operator would monitor OSPFv3 neighbor adjacency state and area configuration to detect a routing adjacency that has dropped, which would indicate a link or protocol-configuration problem affecting IPv6 routing convergence.

What Can Be Monitored

OSPFv3 neighbor adjacency state
routing area configuration

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddressIPv4
InetAddressIPv6

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleOSPFv3	1.3.6.1.4.1.6296.101.52			Description.
sleOspfv3Base	1.3.6.1.4.1.6296.101.52.1
sleOspfv3BaseInfo	1.3.6.1.4.1.6296.101.52.1.1
INT sleOspfv3RouteDisplayMode	1.3.6.1.4.1.6296.101.52.1.1.1	INTEGER	read-only	Description.
I32 sleOspfv3RestartPeriod	1.3.6.1.4.1.6296.101.52.1.1.2	Integer32	read-only	OSPF Graceful-restart period
INT sleOspfv3RestartHelperPolicy	1.3.6.1.4.1.6296.101.52.1.1.3	INTEGER	read-only	OSPF Graceful-restart local policy by helper mode
I32 sleOspfv3RestartHelperPeriod	1.3.6.1.4.1.6296.101.52.1.1.4	Integer32	read-only	OSPF Graceful-restart local policy period by helper mode
INT sleOspfv3SnmpNotification	1.3.6.1.4.1.6296.101.52.1.1.5	INTEGER	read-only	Snmp notification status of OSPF.
sleOspfv3BaseControl	1.3.6.1.4.1.6296.101.52.1.2
INT sleOspfv3ControlRequest	1.3.6.1.4.1.6296.101.52.1.2.1	INTEGER	read-write	The request of a user command
SLE sleOspfv3ControlStatus	1.3.6.1.4.1.6296.101.52.1.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ControlTimer	1.3.6.1.4.1.6296.101.52.1.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ControlTimeStamp	1.3.6.1.4.1.6296.101.52.1.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ControlReqResult	1.3.6.1.4.1.6296.101.52.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ControlRouteDisplayMode	1.3.6.1.4.1.6296.101.52.1.2.6	INTEGER	read-write	Display Mode of OSPFv3 Route.
I32 sleOspfv3ControlRestartPeriod	1.3.6.1.4.1.6296.101.52.1.2.7	Integer32	read-write	OSPFv3 Graceful-restart period.
INT sleOspfv3ControlRestartHelperPolicy	1.3.6.1.4.1.6296.101.52.1.2.8	INTEGER	read-write	Tag of OSPFv3 Process.
I32 sleOspfv3ControlRestartHelperPeriod	1.3.6.1.4.1.6296.101.52.1.2.9	Integer32	read-write	OSPF Graceful-restart local policy period by helper mode
INT sleOspfv3ControlSnmpNotification	1.3.6.1.4.1.6296.101.52.1.2.10	INTEGER	read-write	Snmp notification status of OSPF.
sleOspfv3BaseNotification	1.3.6.1.4.1.6296.101.52.1.3
NTF sleOspfv3RouteDisplayModeChanged	1.3.6.1.4.1.6296.101.52.1.3.1			Description.
NTF sleOspfv3RestartPeriodChanged	1.3.6.1.4.1.6296.101.52.1.3.2			setOspfv3RestartPeriod
NTF sleOspfv3RestartHelperProfileChanged	1.3.6.1.4.1.6296.101.52.1.3.3			setOspfv3RestartHelperProfile
NTF sleOspfv3GracefulRestarted	1.3.6.1.4.1.6296.101.52.1.3.4			restartOspfv3Graceful
NTF sleOspfv3SnmpNotificationiChanged	1.3.6.1.4.1.6296.101.52.1.3.5			setSnmpNotification
sleOspfv3Proc	1.3.6.1.4.1.6296.101.52.2
sleOspfv3ProcInfo	1.3.6.1.4.1.6296.101.52.2.1
sleOspfv3ProcInfoTable	1.3.6.1.4.1.6296.101.52.2.1.1		not-accessible	Description.
sleOspfv3ProcInfoEntry	1.3.6.1.4.1.6296.101.52.2.1.1.1		not-accessible	Description.
INT sleOspfv3ProcIndex	1.3.6.1.4.1.6296.101.52.2.1.1.1.1	INTEGER	read-only	Index of OSPFv3 Process.
OCT sleOspfv3ProcTag	1.3.6.1.4.1.6296.101.52.2.1.1.1.2	OCTET STRING	read-only	Tag name of OSPFv3 Process.
ADR sleOspfv3ProcRouterId	1.3.6.1.4.1.6296.101.52.2.1.1.1.3	InetAddressIPv4	read-only	Router-Id in IPv4 Address format of this OSPFv3 Process. The size of 0 means that this process has not router-id.
INT sleOspfv3ProcSpfDelayTime	1.3.6.1.4.1.6296.101.52.2.1.1.1.4	INTEGER	read-only	SPF Delay-Time of this OSPFv3 Process. The value of -1 means default delay-time.
INT sleOspfv3ProcSpfHoldTime	1.3.6.1.4.1.6296.101.52.2.1.1.1.5	INTEGER	read-only	SPF Hold-Time of this OSPFv3 Process. The value of -1 means default hold-time.
INT sleOspfv3ProcAutoCost	1.3.6.1.4.1.6296.101.52.2.1.1.1.6	INTEGER	read-only	OSPFv3 Interface cost calculated according to bandwidth. The value of 0 means default auto-cost.
INT sleOspfv3ProcAbrType	1.3.6.1.4.1.6296.101.52.2.1.1.1.7	INTEGER	read-only	ABR type of this OSPFv3 Process. Default value is 'cisco'.
INT sleOspfv3ProcDefaultMetric	1.3.6.1.4.1.6296.101.52.2.1.1.1.8	INTEGER	read-only	Description.
INT sleOspfv3ProcMaxConcurrentDD	1.3.6.1.4.1.6296.101.52.2.1.1.1.9	INTEGER	read-only	Maximum number allowed to process DD concurrently in this OSPFv3 Process.
INT sleOspfv3ProcDefaultOriginType	1.3.6.1.4.1.6296.101.52.2.1.1.1.10	INTEGER	read-only	If or not Always advertise default route.
INT sleOspfv3ProcDefaultOriginMetricType	1.3.6.1.4.1.6296.101.52.2.1.1.1.11	INTEGER	read-only	Metric type for default route in this OSPFv3 Process.
INT sleOspfv3ProcDefaultOriginMetric	1.3.6.1.4.1.6296.101.52.2.1.1.1.12	INTEGER	read-only	Metric value for default route in this OSPFv3 Process.
OCT sleOspfv3ProcDefaultOriginRouteMap	1.3.6.1.4.1.6296.101.52.2.1.1.1.13	OCTET STRING	read-only	Route-Map referenced by default route in this OSPFv3 Process. The size of 0 means that any route-map is not referenced.
INT sleOspfv3ProcLogNeighborChange	1.3.6.1.4.1.6296.101.52.2.1.1.1.14	INTEGER	read-only	Description.
INT sleOspfv3ProcBfdAllIf	1.3.6.1.4.1.6296.101.52.2.1.1.1.15	INTEGER	read-only	If or not use bfd in all the interface refered by this process.
INT sleOspfv3ProcEfmAllIf	1.3.6.1.4.1.6296.101.52.2.1.1.1.16	INTEGER	read-only	If or not use efm-oam in all the interface refered by this process.
INT sleOspfv3ProcVRIndex	1.3.6.1.4.1.6296.101.52.2.1.1.1.17	INTEGER	read-only	VR Index of OSPFv3 Process.
OCT sleOspfv3ProcVRFName	1.3.6.1.4.1.6296.101.52.2.1.1.1.18	OCTET STRING	read-only	VRF Name of OSPFv3 Process.
INT sleOspfv3ProcSPFStartDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.19	INTEGER	read-only
INT sleOspfv3ProcSPFMinDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.20	INTEGER	read-only	SPF Throttle Min Delay of OSPFv3 Timer
INT sleOspfv3ProcSPFMaxDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.21	INTEGER	read-only	SPF Throttle Max Delay of OSPFv3 Timer
INT sleOspfv3ProcLSAStartDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.22	INTEGER	read-only	LSA Throttle Start Delay of OSPFv3 Timer
INT sleOspfv3ProcLSAMinDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.23	INTEGER	read-only	LSA Throttle Min Delay of OSPFv3 Timer
INT sleOspfv3ProcLSAMaxDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.24	INTEGER	read-only	LSA Throttle Max Delay of OSPFv3 Timer
INT sleOspfv3ProcLSAArrivalDelay	1.3.6.1.4.1.6296.101.52.2.1.1.1.25	INTEGER	read-only	LSA Arrival Delay of OSPFv3 Timer
sleOspfv3ProcInfoControl	1.3.6.1.4.1.6296.101.52.2.1.2
INT sleOspfv3ProcControlRequest	1.3.6.1.4.1.6296.101.52.2.1.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcControlStatus	1.3.6.1.4.1.6296.101.52.2.1.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcControlTimer	1.3.6.1.4.1.6296.101.52.2.1.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.1.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcControlReqResult	1.3.6.1.4.1.6296.101.52.2.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ProcControlIndex	1.3.6.1.4.1.6296.101.52.2.1.2.6	INTEGER	read-write	Index of OSPFv3 Process.
OCT sleOspfv3ProcControlTag	1.3.6.1.4.1.6296.101.52.2.1.2.7	OCTET STRING	read-write	Tag name of OSPFv3 Process.
ADR sleOspfv3ProcControlRouterId	1.3.6.1.4.1.6296.101.52.2.1.2.8	InetAddressIPv4	read-write	Router-Id in IPv4 Address format of this OSPFv3 Process. The size of 0 means that this process has not router-id.
INT sleOspfv3ProcControlSpfDelayTime	1.3.6.1.4.1.6296.101.52.2.1.2.9	INTEGER	read-write	SPF Delay-Time of this OSPFv3 Process. The value of -1 means default delay-time.
INT sleOspfv3ProcControlSpfHoldTime	1.3.6.1.4.1.6296.101.52.2.1.2.10	INTEGER	read-write	SPF Hold-Time of this OSPFv3 Process. The value of -1 means default hold-time.
INT sleOspfv3ProcControlAutoCost	1.3.6.1.4.1.6296.101.52.2.1.2.11	INTEGER	read-write	OSPFv3 Interface cost calculated according to bandwidth. The value of 0 means default auto-cost.
INT sleOspfv3ProcControlAbrType	1.3.6.1.4.1.6296.101.52.2.1.2.12	INTEGER	read-write	ABR type of this OSPFv3 Process. Default value is 'cisco'.
INT sleOspfv3ProcControlDefaultMetric	1.3.6.1.4.1.6296.101.52.2.1.2.13	INTEGER	read-write	Default Metric value of this OSPFv3 Process. The value of -1 means default metric value.
INT sleOspfv3ProcControlMaxConcurrentDD	1.3.6.1.4.1.6296.101.52.2.1.2.14	INTEGER	read-write	Maximum number allowed to process DD concurrently in this OSPFv3 Process.
INT sleOspfv3ProcControlDefaultOriginType	1.3.6.1.4.1.6296.101.52.2.1.2.15	INTEGER	read-write	If or not Always advertise default route.
INT sleOspfv3ProcControlDefaultOriginMetricType	1.3.6.1.4.1.6296.101.52.2.1.2.16	INTEGER	read-write	Metric type for default route in this OSPFv3 Process.
INT sleOspfv3ProcControlDefaultOriginMetric	1.3.6.1.4.1.6296.101.52.2.1.2.17	INTEGER	read-write	Metric value for default route in this OSPFv3 Process.
OCT sleOspfv3ProcControlDefaultOriginRouteMap	1.3.6.1.4.1.6296.101.52.2.1.2.18	OCTET STRING	read-write	Route-Map referenced by default route in this OSPFv3 Process. The size of 0 means that any route-map is not referenced.
INT sleOspfv3ProcControlLogNeighborChange	1.3.6.1.4.1.6296.101.52.2.1.2.19	INTEGER	read-write	If or not logging neigbour-state change and reset reason.
INT sleOspfv3ProcControlBfdAllIf	1.3.6.1.4.1.6296.101.52.2.1.2.20	INTEGER	read-write	If or not use bfd in all the interface refered by this process.
INT sleOspfv3ProcControlEfmAllIf	1.3.6.1.4.1.6296.101.52.2.1.2.21	INTEGER	read-write	If or not use efm-oam in all the interface refered by this process.
INT sleOspfv3ProcControlVRIndex	1.3.6.1.4.1.6296.101.52.2.1.2.22	INTEGER	read-write	VR Index of OSPFv3 Process.
OCT sleOspfv3ProcControlVRFName	1.3.6.1.4.1.6296.101.52.2.1.2.23	OCTET STRING	read-write	VRF Name of OSPFv3 Process.
INT sleOspfv3ProcControlSPFStartDelay	1.3.6.1.4.1.6296.101.52.2.1.2.24	INTEGER	read-write	SPF Throttle Start Delay of OSPFv3 Timer
INT sleOspfv3ProcControlSPFMinDelay	1.3.6.1.4.1.6296.101.52.2.1.2.25	INTEGER	read-write	SPF Throttle Min Delay of OSPFv3 Timer
INT sleOspfv3ProcControlSPFMaxDelay	1.3.6.1.4.1.6296.101.52.2.1.2.26	INTEGER	read-write	SPF Throttle Max Delay of OSPFv3 Timer
INT sleOspfv3ProcControlLSAStartDelay	1.3.6.1.4.1.6296.101.52.2.1.2.27	INTEGER	read-write	LSA Throttle Start Delay of OSPFv3 Timer
INT sleOspfv3ProcControlLSAMinDelay	1.3.6.1.4.1.6296.101.52.2.1.2.28	INTEGER	read-write	LSA Throttle Min Delay of OSPFv3 Timer
INT sleOspfv3ProcControlLSAMaxDelay	1.3.6.1.4.1.6296.101.52.2.1.2.29	INTEGER	read-write	LSA Throttle Max Delay of OSPFv3 Timer
INT sleOspfv3ProcControlLSAArrivalDelay	1.3.6.1.4.1.6296.101.52.2.1.2.30	INTEGER	read-write	LSA Arrival Delay of OSPFv3 Timer
sleOspfv3ProcInfoNotification	1.3.6.1.4.1.6296.101.52.2.1.3
NTF sleOspfv3ProcCreated	1.3.6.1.4.1.6296.101.52.2.1.3.1			Description.
NTF sleOspfv3ProcProfileChanged	1.3.6.1.4.1.6296.101.52.2.1.3.2			Description.
NTF sleOspfv3ProcDestroyed	1.3.6.1.4.1.6296.101.52.2.1.3.3			Description.
NTF sleOspfv3ProcCleared	1.3.6.1.4.1.6296.101.52.2.1.3.4			Description.
sleOspfv3ProcSummary	1.3.6.1.4.1.6296.101.52.2.2
sleOspfv3ProcSummaryTable	1.3.6.1.4.1.6296.101.52.2.2.1		not-accessible	Description.
sleOspfv3ProcSummaryEntry	1.3.6.1.4.1.6296.101.52.2.2.1.1		not-accessible	Description.
ADR sleOspfv3ProcSummaryAddress	1.3.6.1.4.1.6296.101.52.2.2.1.1.1	InetAddressIPv6	read-only	IPv6 Address summaries.
INT sleOspfv3ProcSummaryMask	1.3.6.1.4.1.6296.101.52.2.2.1.1.2	INTEGER	read-only	IPv6 Address summaries'mask length.
G32 sleOspfv3ProcSummaryTag	1.3.6.1.4.1.6296.101.52.2.2.1.1.3	Gauge32	read-only	IPv6 Address summaries'tag value.
INT sleOspfv3ProcSummaryAdvertiseFlag	1.3.6.1.4.1.6296.101.52.2.2.1.1.4	INTEGER	read-only	Use suppress routes or tag.
sleOspfv3rocSummaryControl	1.3.6.1.4.1.6296.101.52.2.2.2
INT sleOspfv3ProcSummaryControlRequest	1.3.6.1.4.1.6296.101.52.2.2.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcSummaryControlStatus	1.3.6.1.4.1.6296.101.52.2.2.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcSummaryControlTimer	1.3.6.1.4.1.6296.101.52.2.2.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcSummaryControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.2.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcSummaryControlReqResult	1.3.6.1.4.1.6296.101.52.2.2.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ProcSummaryControlIndex	1.3.6.1.4.1.6296.101.52.2.2.2.6	INTEGER	read-write	Index of OSPFv3 Process.
ADR sleOspfv3ProcSummaryControlAddress	1.3.6.1.4.1.6296.101.52.2.2.2.7	InetAddressIPv6	read-write	IPv6 Address summaries.
INT sleOspfv3ProcSummaryControlMask	1.3.6.1.4.1.6296.101.52.2.2.2.8	INTEGER	read-write	IPv6 Address summaries'mask length.
G32 sleOspfv3ProcSummaryControlTag	1.3.6.1.4.1.6296.101.52.2.2.2.9	Gauge32	read-write	IPv6 Address summaries'tag value.
INT sleOspfv3ProcSummaryControlAdvertiseFlag	1.3.6.1.4.1.6296.101.52.2.2.2.10	INTEGER	read-write	Use suppress routes or tag.
sleOspfv3ProcSummaryNotification	1.3.6.1.4.1.6296.101.52.2.2.3
NTF sleOspfv3ProcSummaryCreated	1.3.6.1.4.1.6296.101.52.2.2.3.1			Description.
NTF sleOspfv3ProcSummaryChanged	1.3.6.1.4.1.6296.101.52.2.2.3.2			Description.
NTF sleOspfv3ProcSummaryDestroyed	1.3.6.1.4.1.6296.101.52.2.2.3.3			Description.
sleOspfv3ProcPassiveIf	1.3.6.1.4.1.6296.101.52.2.3
sleOspfv3ProcPassiveIfTable	1.3.6.1.4.1.6296.101.52.2.3.1		not-accessible	Description.
sleOspfv3ProcPassiveIfEntry	1.3.6.1.4.1.6296.101.52.2.3.1.1		not-accessible	Description.
INT sleOspfv3ProcPassiveIfIndex	1.3.6.1.4.1.6296.101.52.2.3.1.1.1	INTEGER	read-only	Index of Passive Interface in this OSPFv3 Process.
sleOspfv3ProcPassIfControl	1.3.6.1.4.1.6296.101.52.2.3.2
INT sleOspfv3ProcPassiveIfControlRequest	1.3.6.1.4.1.6296.101.52.2.3.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcPassiveIfControlStatus	1.3.6.1.4.1.6296.101.52.2.3.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcPassiveIfControlTimer	1.3.6.1.4.1.6296.101.52.2.3.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcPassiveIfControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.3.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcPassiveIfControlReqResult	1.3.6.1.4.1.6296.101.52.2.3.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ProcPassiveIfControlIndex	1.3.6.1.4.1.6296.101.52.2.3.2.6	INTEGER	read-write	Index of OSPFv3 Process.
INT sleOspfv3ProcPassiveIfControlIfIndex	1.3.6.1.4.1.6296.101.52.2.3.2.7	INTEGER	read-write	Index of Passive Interface in this OSPFv3 Process.
sleOspfv3ProcPassIfNotification	1.3.6.1.4.1.6296.101.52.2.3.3
NTF sleOspfv3ProcPassiveIfAdded	1.3.6.1.4.1.6296.101.52.2.3.3.1			Description.
NTF sleOspfv3ProcPassiveIfDeleted	1.3.6.1.4.1.6296.101.52.2.3.3.2			Description.
sleOspfv3ProcRedist	1.3.6.1.4.1.6296.101.52.2.4
sleOspfv3ProcRedistTable	1.3.6.1.4.1.6296.101.52.2.4.1		not-accessible	Description.
sleOspfv3ProcRedistEntry	1.3.6.1.4.1.6296.101.52.2.4.1.1		not-accessible	Description.
INT sleOspfv3ProcRedistType	1.3.6.1.4.1.6296.101.52.2.4.1.1.1	INTEGER	read-only	Metric type for redistributed routes.
INT sleOspfv3ProcRedistMetricType	1.3.6.1.4.1.6296.101.52.2.4.1.1.2	INTEGER	read-only	Metric type for redistributed routes.
INT sleOspfv3ProcRedistMetric	1.3.6.1.4.1.6296.101.52.2.4.1.1.3	INTEGER	read-only	Default Metric value of redistributed routes.
OCT sleOSpfv3ProcRedistRouteMapName	1.3.6.1.4.1.6296.101.52.2.4.1.1.4	OCTET STRING	read-only	Route-map name refered by this. The size of 0 means that it has not refered rout-map.
sleOspfv3ProcRedistControl	1.3.6.1.4.1.6296.101.52.2.4.2
INT sleOspfv3ProcRedistControlRequest	1.3.6.1.4.1.6296.101.52.2.4.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcRedistControlStatus	1.3.6.1.4.1.6296.101.52.2.4.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcRedistControlTimer	1.3.6.1.4.1.6296.101.52.2.4.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcRedistControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.4.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcRedistControlReqResult	1.3.6.1.4.1.6296.101.52.2.4.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ProcRedistControlIndex	1.3.6.1.4.1.6296.101.52.2.4.2.6	INTEGER	read-write	Index of OSPFv3 Process.
INT sleOspfv3ProcRedistControlType	1.3.6.1.4.1.6296.101.52.2.4.2.7	INTEGER	read-write	Metric type for redistributed routes.
INT sleOspfv3ProcRedistControlMetricType	1.3.6.1.4.1.6296.101.52.2.4.2.8	INTEGER	read-write	Metric type for redistributed routes.
INT sleOspfv3ProcRedistControlMetric	1.3.6.1.4.1.6296.101.52.2.4.2.9	INTEGER	read-write	Default Metric value of redistributed routes.
OCT sleOSpfv3ProcRedistControlRouteMapName	1.3.6.1.4.1.6296.101.52.2.4.2.10	OCTET STRING	read-write	Route-map name refered by this. The size of 0 means that it has not refered rout-map.
sleOspfv3ProcRedistNotification	1.3.6.1.4.1.6296.101.52.2.4.3
NTF sleOspfv3ProcRedistCreated	1.3.6.1.4.1.6296.101.52.2.4.3.1			Description.
NTF sleOspfv3ProcRedistChanged	1.3.6.1.4.1.6296.101.52.2.4.3.2			Description.
NTF sleOspfv3ProcRedistDestroyed	1.3.6.1.4.1.6296.101.52.2.4.3.3			Description.
sleOspfv3ProcArea	1.3.6.1.4.1.6296.101.52.2.5
sleOspfv3ProcAreaInfo	1.3.6.1.4.1.6296.101.52.2.5.1
sleOspfv3ProcAreaInfoTable	1.3.6.1.4.1.6296.101.52.2.5.1.1		not-accessible	Description.
sleOspfv3ProcAreaInfoEntry	1.3.6.1.4.1.6296.101.52.2.5.1.1.1		not-accessible	Description.
IP sleOspfv3ProcAreaInfoIndex	1.3.6.1.4.1.6296.101.52.2.5.1.1.1.1	IpAddress	read-only	Area ID in decimal.
INT sleOspfv3ProcAreaInfoType	1.3.6.1.4.1.6296.101.52.2.5.1.1.1.2	INTEGER	read-only	Area Type.
INT sleOspfv3ProcAreaInfoDefaultCost	1.3.6.1.4.1.6296.101.52.2.5.1.1.1.3	INTEGER	read-only	Default cost of area. It is meaning only if area is a NSSA or stub. The value of -1 that this area has not significant default cost.
INT sleOspfv3ProcAreaInfoSummary	1.3.6.1.4.1.6296.101.52.2.5.1.1.1.4	INTEGER	read-only	The controls the import of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
sleOspfv3ProcAreaInfoControl	1.3.6.1.4.1.6296.101.52.2.5.1.2
INT sleOspfv3ProcAreaInfoControlRequest	1.3.6.1.4.1.6296.101.52.2.5.1.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcAreaInfoControlStatus	1.3.6.1.4.1.6296.101.52.2.5.1.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcAreaInfoControlTimer	1.3.6.1.4.1.6296.101.52.2.5.1.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcAreaInfoControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.5.1.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcAreaInfoControlReqResult	1.3.6.1.4.1.6296.101.52.2.5.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleOspfv3ProcAreaInfoControlIndex	1.3.6.1.4.1.6296.101.52.2.5.1.2.6	INTEGER	read-write	Index of OSPFv3 Process.
IP sleOspfv3ProcAreaInfoControlAreaIndex	1.3.6.1.4.1.6296.101.52.2.5.1.2.7	IpAddress	read-write	Area ID in decimal.
INT sleOspfv3ProcAreaInfoControlType	1.3.6.1.4.1.6296.101.52.2.5.1.2.8	INTEGER	read-write	Area Type.
INT sleOspfv3ProcAreaInfoControlDefaultCost	1.3.6.1.4.1.6296.101.52.2.5.1.2.9	INTEGER	read-write	Area Type.
INT sleOspfv3ProcAreaInfoControlSummary	1.3.6.1.4.1.6296.101.52.2.5.1.2.10	INTEGER	read-write	The controls the import of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
sleOspfv3ProcAreaInfoNotification	1.3.6.1.4.1.6296.101.52.2.5.1.3
NTF sleOspfv3ProcAreaInfoCreated	1.3.6.1.4.1.6296.101.52.2.5.1.3.1			Description.
NTF sleOspfv3ProcAreaInfoChanged	1.3.6.1.4.1.6296.101.52.2.5.1.3.2			Description.
NTF sleOspfv3ProcAreaInfoDestroyed	1.3.6.1.4.1.6296.101.52.2.5.1.3.3			Description.
sleOspfv3ProcAreaRange	1.3.6.1.4.1.6296.101.52.2.5.2
sleOspfv3ProcAreaRangeTable	1.3.6.1.4.1.6296.101.52.2.5.2.1		not-accessible	Description.
sleOspfv3ProcAreaRangeEntry	1.3.6.1.4.1.6296.101.52.2.5.2.1.1		not-accessible	Description.
ADR sleOspfv3ProcAreaRangeAddress	1.3.6.1.4.1.6296.101.52.2.5.2.1.1.1	InetAddressIPv6	read-only	IPv6 Address of range.
INT sleOspfv3ProcAreaRangeMask	1.3.6.1.4.1.6296.101.52.2.5.2.1.1.2	INTEGER	read-only	IPv6 Address of range.
INT sleOspfv3ProcAreaRangeAdvertiseFlag	1.3.6.1.4.1.6296.101.52.2.5.2.1.1.3	INTEGER	read-only	Advertise or not this range of area.
sleOspfv3ProcAreaRangeControl	1.3.6.1.4.1.6296.101.52.2.5.2.2
INT sleOspfv3ProcAreaRangeControlRequest	1.3.6.1.4.1.6296.101.52.2.5.2.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcAreaRangeControlStatus	1.3.6.1.4.1.6296.101.52.2.5.2.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcAreaRangeControlTimer	1.3.6.1.4.1.6296.101.52.2.5.2.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcAreaRangeControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.5.2.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcAreaRangeControlReqResult	1.3.6.1.4.1.6296.101.52.2.5.2.2.5	SleControlRequestResultType	read-only	Index of OSPFv3 Process.
INT sleOspfv3ProcAreaRangeControlIndex	1.3.6.1.4.1.6296.101.52.2.5.2.2.6	INTEGER	read-write	Description.
IP sleOspfv3ProcAreaRangeControlAreaIndex	1.3.6.1.4.1.6296.101.52.2.5.2.2.7	IpAddress	read-write	Area ID in decimal.
ADR sleOspfv3ProcAreaRangeControlAddr	1.3.6.1.4.1.6296.101.52.2.5.2.2.8	InetAddressIPv6	read-write	IPv6 Address of range
INT sleOspfv3ProcAreaRangeControlMask	1.3.6.1.4.1.6296.101.52.2.5.2.2.9	INTEGER	read-write	Description.
INT sleOspfv3ProcAreaRangeControlAdvertiseFlag	1.3.6.1.4.1.6296.101.52.2.5.2.2.10	INTEGER	read-write	Description.
sleOspfv3ProcAreaRangeNotification	1.3.6.1.4.1.6296.101.52.2.5.2.3
NTF sleOspfv3ProcAreaRangeCreated	1.3.6.1.4.1.6296.101.52.2.5.2.3.1			Description.
NTF sleOspfv3ProcAreaRangeChanged	1.3.6.1.4.1.6296.101.52.2.5.2.3.2			Description.
NTF sleOspfv3ProcAreaRangeDestroyed	1.3.6.1.4.1.6296.101.52.2.5.2.3.3			Description.
sleOspfv3ProcAreaVlink	1.3.6.1.4.1.6296.101.52.2.5.3
sleOspfv3ProcAreaVlinkTable	1.3.6.1.4.1.6296.101.52.2.5.3.1		not-accessible	Description.
sleOspfv3ProcAreaVlinkEntry	1.3.6.1.4.1.6296.101.52.2.5.3.1.1		not-accessible	Description.
ADR sleOspfv3ProcAreaVlinkRouterId	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.1	InetAddressIPv4	read-only	Router ID associated with this virtual-link neighbor.
INT sleOspfv3ProcAreaVlinkDeadInterval	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.2	INTEGER	read-only	Dead router detection time in unit of second. The value of 0 means that this virtual-link has not specific dead-interval.
INT sleOspfv3ProcAreaVlinkHelloInterval	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.3	INTEGER	read-only	Interval between hello packet in unit of second. The value of 0 means that this virtual-link has not specific hello-interval.
INT sleOspfv3ProcAreaVlinkInstanceId	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.4	INTEGER	read-only	OSPFv3 instance ID of this virtual-link. The value of 0 means unspecific setting.
INT sleOspfv3ProcAreaVlinkRetransInterval	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.5	INTEGER	read-only	LSA retransmit interval in unit of second.
INT sleOspfv3ProcAreaVlinkTransDelay	1.3.6.1.4.1.6296.101.52.2.5.3.1.1.6	INTEGER	read-only	LSA transmission delay in unit of second. The value of 0 means that this virtual-link has not specific transmission-delay.
sleOspfv3ProcAreaVlinkControl	1.3.6.1.4.1.6296.101.52.2.5.3.2
INT sleOspfv3ProcAreaVlinkControlRequest	1.3.6.1.4.1.6296.101.52.2.5.3.2.1	INTEGER	read-write	Description.
SLE sleOspfv3ProcAreaVlinkControlStatus	1.3.6.1.4.1.6296.101.52.2.5.3.2.2	SleControlStatusType	read-only	Description.
G32 sleOspfv3ProcAreaVlinkControlTimer	1.3.6.1.4.1.6296.101.52.2.5.3.2.3	Gauge32	read-write	Description.
TIK sleOspfv3ProcAreaVlinkControlTimeStamp	1.3.6.1.4.1.6296.101.52.2.5.3.2.4	TimeTicks	read-only	Description.
SLE sleOspfv3ProcAreaVlinkControlReqResult	1.3.6.1.4.1.6296.101.52.2.5.3.2.5	SleControlRequestResultType	read-only	Index of OSPFv3 Process.
INT sleOspfv3ProcAreaVlinkControlIndex	1.3.6.1.4.1.6296.101.52.2.5.3.2.6	INTEGER	read-write	Description.
IP sleOspfv3ProcAreaVlinkControlAreaIndex	1.3.6.1.4.1.6296.101.52.2.5.3.2.7	IpAddress	read-write	Area ID in decimal.
ADR sleOspfv3ProcAreaVlinkControlRouterId	1.3.6.1.4.1.6296.101.52.2.5.3.2.8	InetAddressIPv4	read-write	Router ID associated with this virtual-link neighbor.
INT sleOspfv3ProcAreaVlinkControlDeadInterval	1.3.6.1.4.1.6296.101.52.2.5.3.2.9	INTEGER	read-write	Dead router detection time in unit of second. The value of 0 means that this virtual-link has not specific dead-interval.
INT sleOspfv3ProcAreaVlinkControlHelloInterval	1.3.6.1.4.1.6296.101.52.2.5.3.2.10	INTEGER	read-write	Interval between hello packet in unit of second. The value of 0 means that this virtual-link has not specific hello-interval.
INT sleOspfv3ProcAreaVlinkControlInstanceId	1.3.6.1.4.1.6296.101.52.2.5.3.2.11	INTEGER	read-write	OSPFv3 instance ID of this virtual-link. The value of 0 means unspecific setting.
INT sleOspfv3ProcAreaVlinkControlRetransInterval	1.3.6.1.4.1.6296.101.52.2.5.3.2.12	INTEGER	read-write	LSA retransmit interval in unit of second. The value of 0 means that this virtual-link has not specific retransmit-interval.
INT sleOspfv3ProcAreaVlinkControlTransDelay	1.3.6.1.4.1.6296.101.52.2.5.3.2.13	INTEGER	read-write	LSA transmission delay in unit of second. The value of 0 means that this virtual-link has not specific transmission-delay.
sleOspfv3ProcAreaVlinkNotification	1.3.6.1.4.1.6296.101.52.2.5.3.3
NTF sleOspfv3ProcAreaVlinkCreated	1.3.6.1.4.1.6296.101.52.2.5.3.3.1			Description.
NTF sleOspfv3ProcAreaVlinkChanged	1.3.6.1.4.1.6296.101.52.2.5.3.3.2			Description.
NTF sleOspfv3ProcAreaVlinkDestroyed	1.3.6.1.4.1.6296.101.52.2.5.3.3.3			Description.
sleOspfv3Interface	1.3.6.1.4.1.6296.101.52.3
sleOspfv3IfInstance	1.3.6.1.4.1.6296.101.52.3.1
sleOspfv3IfInstanceTable	1.3.6.1.4.1.6296.101.52.3.1.1		not-accessible	Description.
sleOspfv3IfInstanceEntry	1.3.6.1.4.1.6296.101.52.3.1.1.1		not-accessible	Description.
I32 sleOspfv3IfInstanceIfIndex	1.3.6.1.4.1.6296.101.52.3.1.1.1.1	Integer32	read-only	Description.
I32 sleOspfv3IfInstanceInstanceId	1.3.6.1.4.1.6296.101.52.3.1.1.1.2	Integer32	read-only	Description.
OCT sleOspfv3IfInstanceProcTag	1.3.6.1.4.1.6296.101.52.3.1.1.1.3	OCTET STRING	read-only	Description.
INT sleOspfv3IfInstanceAreaFlag	1.3.6.1.4.1.6296.101.52.3.1.1.1.4	INTEGER	read-only	Description.
IP sleOspfv3IfInstanceAreaIndex	1.3.6.1.4.1.6296.101.52.3.1.1.1.5	IpAddress	read-only	Description.
I32 sleOspfv3IfInstanceDeadInterval	1.3.6.1.4.1.6296.101.52.3.1.1.1.6	Integer32	read-only	Description.
I32 sleOspfv3IfInstanceHelloInterval	1.3.6.1.4.1.6296.101.52.3.1.1.1.7	Integer32	read-only	Description.
INT sleOspfv3IfInstanceNetworkType	1.3.6.1.4.1.6296.101.52.3.1.1.1.8	INTEGER	read-only	Description.
I32 sleOspfv3IfInstanceCost	1.3.6.1.4.1.6296.101.52.3.1.1.1.9	Integer32	read-only	Description.
I32 sleOspfv3IfInstanceTransDelay	1.3.6.1.4.1.6296.101.52.3.1.1.1.10	Integer32	read-only	Description.
I32 sleOspfv3IfInstanceRetransInterval	1.3.6.1.4.1.6296.101.52.3.1.1.1.11	Integer32	read-only	Description.
I32 sleOspfv3IfInstancePriority	1.3.6.1.4.1.6296.101.52.3.1.1.1.12	Integer32	read-only	Description.
INT sleOspfv3IfInstanceBfd	1.3.6.1.4.1.6296.101.52.3.1.1.1.13	INTEGER	read-only	Description.
INT sleOspfv3IfInstanceEfm	1.3.6.1.4.1.6296.101.52.3.1.1.1.14	INTEGER	read-only	Description.
sleOspfv3ProcIfInstanceControl	1.3.6.1.4.1.6296.101.52.3.1.2
INT sleOspfv3IfInstanceControlRequest	1.3.6.1.4.1.6296.101.52.3.1.2.1	INTEGER	read-write	Description.
SLE sleOspfv3IfInstanceControlStatus	1.3.6.1.4.1.6296.101.52.3.1.2.2	SleControlStatusType	read-write	Description.
G32 sleOspfv3IfInstanceControlTimer	1.3.6.1.4.1.6296.101.52.3.1.2.3	Gauge32	read-write	Description.
TIK sleOspfv3IfInstanceControlTimeStamp	1.3.6.1.4.1.6296.101.52.3.1.2.4	TimeTicks	read-write	Description.
SLE sleOspfv3IfInstanceControlReqResult	1.3.6.1.4.1.6296.101.52.3.1.2.5	SleControlRequestResultType	read-write	Description.
I32 sleOspfv3IfInstanceControlIfIndex	1.3.6.1.4.1.6296.101.52.3.1.2.6	Integer32	read-write	Description.
I32 sleOspfv3IfInstanceControlIfInstanceId	1.3.6.1.4.1.6296.101.52.3.1.2.7	Integer32	read-write	Description.
OCT sleOspfv3IfInstanceControlProcTag	1.3.6.1.4.1.6296.101.52.3.1.2.8	OCTET STRING	read-write	Description.
INT sleOspfv3IfInstanceControlAreaFlag	1.3.6.1.4.1.6296.101.52.3.1.2.9	INTEGER	read-write	Description.
IP sleOspfv3IfInstanceControlAreaIndex	1.3.6.1.4.1.6296.101.52.3.1.2.10	IpAddress	read-write	Description.
I32 sleOspfv3IfInstanceControlDeadInterval	1.3.6.1.4.1.6296.101.52.3.1.2.11	Integer32	read-write	Description.
I32 sleOspfv3IfInstanceControlHelloInterval	1.3.6.1.4.1.6296.101.52.3.1.2.12	Integer32	read-write	Description.
INT sleOspfv3IfInstanceControlNetworkType	1.3.6.1.4.1.6296.101.52.3.1.2.13	INTEGER	read-write	Description.
I32 sleOspfv3IfInstanceControlCost	1.3.6.1.4.1.6296.101.52.3.1.2.14	Integer32	read-write	Description.
I32 sleOspfv3IfInstanceControlTransDelay	1.3.6.1.4.1.6296.101.52.3.1.2.15	Integer32	read-write	Description.
I32 sleOspfv3IfInstanceControlRetransInterval	1.3.6.1.4.1.6296.101.52.3.1.2.16	Integer32	read-write	Description.
I32 sleOspfv3IfInstanceControlPriority	1.3.6.1.4.1.6296.101.52.3.1.2.17	Integer32	read-write	Description.
INT sleOspfv3IfInstanceControlBfd	1.3.6.1.4.1.6296.101.52.3.1.2.18	INTEGER	read-write	Description.
INT sleOspfv3IfInstanceControlEfm	1.3.6.1.4.1.6296.101.52.3.1.2.19	INTEGER	read-write	Description.
sleOspfv3IfInstanceNotifications	1.3.6.1.4.1.6296.101.52.3.1.3
NTF sleOspfv3IfInstanceChanged	1.3.6.1.4.1.6296.101.52.3.1.3.1			Description.
sleOspfv3IfNeighbor	1.3.6.1.4.1.6296.101.52.3.2
sleOspfv3IfNeighborTable	1.3.6.1.4.1.6296.101.52.3.2.1		not-accessible	Description.
sleOspfv3IfNeighborEntry	1.3.6.1.4.1.6296.101.52.3.2.1.1		not-accessible	Description.
ADR sleOspfv3IfNeighborAddress	1.3.6.1.4.1.6296.101.52.3.2.1.1.1	InetAddressIPv6	read-only	Description.
I32 sleOspfv3IfNeighborCost	1.3.6.1.4.1.6296.101.52.3.2.1.1.2	Integer32	read-only	Description.
INT sleOspfv3IfNeighborPollIntervalFlag	1.3.6.1.4.1.6296.101.52.3.2.1.1.3	INTEGER	read-write	Description.
U32 sleOspfv3IfNeighborPollIntervalValue	1.3.6.1.4.1.6296.101.52.3.2.1.1.4	Unsigned32	read-only	Description.
I32 sleOspfv3IfNeighborPriority	1.3.6.1.4.1.6296.101.52.3.2.1.1.5	Integer32	read-only	Description.
sleOspfv3ProcIfNeighborControl	1.3.6.1.4.1.6296.101.52.3.2.2
INT sleOspfv3IfNeighborControlRequest	1.3.6.1.4.1.6296.101.52.3.2.2.1	INTEGER	read-write	Description.
SLE sleOspfv3IfNeighborControlStatus	1.3.6.1.4.1.6296.101.52.3.2.2.2	SleControlStatusType	read-write	Description.
G32 sleOspfv3IfNeighborControlTimer	1.3.6.1.4.1.6296.101.52.3.2.2.3	Gauge32	read-write	Description.
TIK sleOspfv3IfNeighborControlTimeStamp	1.3.6.1.4.1.6296.101.52.3.2.2.4	TimeTicks	read-write	Description.
SLE sleOspfv3IfNeighborControlReqResult	1.3.6.1.4.1.6296.101.52.3.2.2.5	SleControlRequestResultType	read-write	Description.
I32 sleOspfv3IfNeighborControlIndex	1.3.6.1.4.1.6296.101.52.3.2.2.6	Integer32	read-write	Description.
I32 sleOspfv3IfNeighborControlInstanceIndex	1.3.6.1.4.1.6296.101.52.3.2.2.7	Integer32	read-write	Description.
ADR sleOspfv3IfNeighborControlAddress	1.3.6.1.4.1.6296.101.52.3.2.2.8	InetAddressIPv6	read-write	Description.
I32 sleOspfv3IfNeighborControlCost	1.3.6.1.4.1.6296.101.52.3.2.2.9	Integer32	read-write	Description.
INT sleOspfv3IfNeighborControlPollIntervalFlag	1.3.6.1.4.1.6296.101.52.3.2.2.10	INTEGER	read-write	Description.
U32 sleOspfv3IfNeighborControlPollInterval	1.3.6.1.4.1.6296.101.52.3.2.2.11	Unsigned32	read-write	Description.
I32 sleOspfv3IfNeighborControlPriority	1.3.6.1.4.1.6296.101.52.3.2.2.12	Integer32	read-write	Description.
sleOspfv3IfNeighborNotifications	1.3.6.1.4.1.6296.101.52.3.2.3
NTF sleOspfv3IfNeighborCreated	1.3.6.1.4.1.6296.101.52.3.2.3.1			Description.
NTF sleOspfv3IfNeighborModified	1.3.6.1.4.1.6296.101.52.3.2.3.2			Description.
NTF sleOspfv3IfNeighborDestroyed	1.3.6.1.4.1.6296.101.52.3.2.3.3			Description.
sleOspfv3IfStatus	1.3.6.1.4.1.6296.101.52.3.3
sleOspfv3IfStatusTable	1.3.6.1.4.1.6296.101.52.3.3.1		not-accessible	Description.
sleOspfv3IfStatusEntry	1.3.6.1.4.1.6296.101.52.3.3.1.1		not-accessible	Description.
OCT sleOspfv3IfStatusProcTag	1.3.6.1.4.1.6296.101.52.3.3.1.1.1	OCTET STRING	read-only	Description.
ADR sleOspfv3IfStatusAreaId	1.3.6.1.4.1.6296.101.52.3.3.1.1.2	InetAddressIPv4	read-only	Description.
INT sleOspfv3IfStatusNetworkType	1.3.6.1.4.1.6296.101.52.3.3.1.1.3	INTEGER	read-only	Description.
INT sleOspfv3IfStatusCost	1.3.6.1.4.1.6296.101.52.3.3.1.1.4	INTEGER	read-only	Description.
INT sleOspfv3IfStatusTransDelay	1.3.6.1.4.1.6296.101.52.3.3.1.1.5	INTEGER	read-only	Description.
INT sleOspfv3IfStatusState	1.3.6.1.4.1.6296.101.52.3.3.1.1.6	INTEGER	read-only	Description.
INT sleOspfv3IfStatusPriority	1.3.6.1.4.1.6296.101.52.3.3.1.1.7	INTEGER	read-write	Description.
ADR sleOspfv3IfStatusDRRouterId	1.3.6.1.4.1.6296.101.52.3.3.1.1.8	InetAddressIPv4	read-write	Description.
ADR sleOspfv3IfStatusDRAddress	1.3.6.1.4.1.6296.101.52.3.3.1.1.9	InetAddressIPv6	read-write	Description.
ADR sleOspfv3IfStatusBackupRouterId	1.3.6.1.4.1.6296.101.52.3.3.1.1.10	InetAddressIPv4	read-write	Description.
ADR sleOspfv3IfStatusBackupAddress	1.3.6.1.4.1.6296.101.52.3.3.1.1.11	InetAddressIPv6	read-write	Description.
INT sleOspfv3IfStatusHelloInterval	1.3.6.1.4.1.6296.101.52.3.3.1.1.12	INTEGER	read-only	Description.
INT sleOspfv3IfStatusDeadInterval	1.3.6.1.4.1.6296.101.52.3.3.1.1.13	INTEGER	read-only	Description.
INT sleOspfv3IfStatusWaitInterval	1.3.6.1.4.1.6296.101.52.3.3.1.1.14	INTEGER	read-only	Description.
INT sleOspfv3IfStatusRetransInterval	1.3.6.1.4.1.6296.101.52.3.3.1.1.15	INTEGER	read-only	Description.
INT sleOspfv3IfNeighborCount	1.3.6.1.4.1.6296.101.52.3.3.1.1.16	INTEGER	read-only	Description.
INT sleOspfv3IfAdjNeighborCount	1.3.6.1.4.1.6296.101.52.3.3.1.1.17	INTEGER	read-only	Description.
sleOspfv3Lsdb	1.3.6.1.4.1.6296.101.52.4
sleOspfv3LsdbTable	1.3.6.1.4.1.6296.101.52.4.1		not-accessible	Description.
sleOspfv3LsdbEntry	1.3.6.1.4.1.6296.101.52.4.1.1		not-accessible	Description.
INT sleOspfv3LsdbType	1.3.6.1.4.1.6296.101.52.4.1.1.1	INTEGER	read-only	Description.
ADR sleOspfv3LsdbLinkStateId	1.3.6.1.4.1.6296.101.52.4.1.1.2	InetAddressIPv4	read-only	Description.
ADR sleOspfv3LsdbAdvRouterId	1.3.6.1.4.1.6296.101.52.4.1.1.3	InetAddressIPv4	read-only	Description.
I32 sleOspfv3LsdbAge	1.3.6.1.4.1.6296.101.52.4.1.1.4	Integer32	read-only	Description.
U32 sleOspfv3LsdbSeqnum	1.3.6.1.4.1.6296.101.52.4.1.1.5	Unsigned32	read-only	Description.
I32 sleOspfv3LsdbLength	1.3.6.1.4.1.6296.101.52.4.1.1.6	Integer32	read-only	Description.
sleOspfv3Neighbor	1.3.6.1.4.1.6296.101.52.5
sleOspfv3NeigborTable	1.3.6.1.4.1.6296.101.52.5.1		not-accessible	Description.
sleOspfv3NeigborEntry	1.3.6.1.4.1.6296.101.52.5.1.1		not-accessible	Description.
INT sleOspfv3NeighborIfType	1.3.6.1.4.1.6296.101.52.5.1.1.1	INTEGER	read-only	Description.
U32 sleOspfv3NeighborIfIndex	1.3.6.1.4.1.6296.101.52.5.1.1.2	Unsigned32	read-only	Description.
ADR sleOspfv3NeighborRouterId	1.3.6.1.4.1.6296.101.52.5.1.1.3	InetAddressIPv4	read-only	Description.
ADR sleOspfv3NeighborAddress	1.3.6.1.4.1.6296.101.52.5.1.1.4	InetAddressIPv6	read-only	Description.
ADR sleOspfv3NeighborAreaId	1.3.6.1.4.1.6296.101.52.5.1.1.5	InetAddressIPv4	read-write	Description.
OCT sleOspfv3NeighborIfName	1.3.6.1.4.1.6296.101.52.5.1.1.6	OCTET STRING	read-only	Description.
INT sleOspfv3NeighborPriority	1.3.6.1.4.1.6296.101.52.5.1.1.7	INTEGER	read-only	Description.
INT sleOspfv3NeighborState	1.3.6.1.4.1.6296.101.52.5.1.1.8	INTEGER	read-only	Description.
I32 sleOspfv3NeighborInstanceId	1.3.6.1.4.1.6296.101.52.5.1.1.9	Integer32	read-only	Description.
ADR sleOspfv3NeighborDRRouterId	1.3.6.1.4.1.6296.101.52.5.1.1.10	InetAddressIPv4	read-only	Description.
ADR sleOspfv3NeighborBDRRouterId	1.3.6.1.4.1.6296.101.52.5.1.1.11	InetAddressIPv4	read-only	Description.
BIT sleOspfv3NeighborOption	1.3.6.1.4.1.6296.101.52.5.1.1.12	Bits	read-only	Description.
TIK sleOspfv3NeighborDeadTime	1.3.6.1.4.1.6296.101.52.5.1.1.13	TimeTicks	read-only	Description.
U32 sleOspfv3NeighborLsdbCount	1.3.6.1.4.1.6296.101.52.5.1.1.14	Unsigned32	read-only	Description.
U32 sleOspfv3NeighborLsreqCount	1.3.6.1.4.1.6296.101.52.5.1.1.15	Unsigned32	read-only	Description.
U32 sleOspfv3NeighborLsrxmitCount	1.3.6.1.4.1.6296.101.52.5.1.1.16	Unsigned32	read-only	Description.
sleOspfv3Route	1.3.6.1.4.1.6296.101.52.6
sleOspfv3RouteTable	1.3.6.1.4.1.6296.101.52.6.1		not-accessible	Description.
sleOspfv3RouteEntry	1.3.6.1.4.1.6296.101.52.6.1.1		not-accessible	Description.
ADR sleOspfv3RouteNetAddr	1.3.6.1.4.1.6296.101.52.6.1.1.1	InetAddressIPv6	read-only	Description.
INT sleOspfv3RouteNetMask	1.3.6.1.4.1.6296.101.52.6.1.1.2	INTEGER	read-only	Description.
ADR sleOspfv3RouteNexthop	1.3.6.1.4.1.6296.101.52.6.1.1.3	InetAddressIPv6	read-only	Description.
INT sleOspfv3RouteType	1.3.6.1.4.1.6296.101.52.6.1.1.4	INTEGER	read-only	Description.
INT sleOspfv3RouteMetric	1.3.6.1.4.1.6296.101.52.6.1.1.5	INTEGER	read-write	Description.
OCT sleOspfv3RouteIfName	1.3.6.1.4.1.6296.101.52.6.1.1.6	OCTET STRING	read-write	Description.
INT sleOspfv3RouteAreaFlag	1.3.6.1.4.1.6296.101.52.6.1.1.7	INTEGER	read-write	Description.
ADR sleOspfv3RouteAreaId	1.3.6.1.4.1.6296.101.52.6.1.1.8	InetAddressIPv4	read-write	Description.
sleOspfv3Group	1.3.6.1.4.1.6296.101.52.7			Description.
sleOspfv3NotificationGroup	1.3.6.1.4.1.6296.101.52.8			Description.

RFC description

Manages OSPFv3 routing protocol configuration and operations on DASAN devices.

Start monitoring DASAN Networks SLE-series OLT/aggregation node (OSPFv3 neighbor/area status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-OSPFv3-MIB

What Is SLE-OSPFv3-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description