SLA-MONITOR-MIB

All MIBs › SLA-MONITOR-MIB

Organization: Avaya Networks, Inc.

Last Updated: 2015-05-29

Category: Network Performance Monitoring

Description: Monitors Avaya SLA Monitor network performance measurements including latency, jitter, and packet loss.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLA-MONITOR-MIB?

SLA-MONITOR-MIB is an Avaya enterprise MIB for the SLA Monitor Agent, a software component that measures network performance metrics such as latency, jitter, and packet loss to verify service-level agreement compliance on Avaya voice/data infrastructure. It exposes the agent's own operational status and its registration relationship with a central SLA Monitor server, including registration state, server address, and registration timestamp, alongside CLI access settings for the agent. Its role in monitoring is primarily software/service status: slaMonitorAgentStatus and slaMonitorAgentRegisteredWithServer indicate whether the measurement agent itself is running and successfully reporting to its controller, which is a prerequisite for any SLA measurement data to be trustworthy. It is an Avaya-specific module with its own notification and conformance branches and no evident dependency on external IETF MIBs. It is typically deployed on Avaya IP telephony endpoints, gateways, or servers used to continuously measure voice/data network quality for SLA verification. Engineers can download the SLA-MONITOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLA-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avaya IP telephony endpoint or gateway
Avaya SLA Monitor agent host

Monitoring Examples

An operator would poll slaMonitorAgentStatus to confirm the agent process is running, and slaMonitorAgentRegisteredWithServer combined with slaMonitorAgentRegisteredServerAddr/slaMonitorAgentRegisteredServerPort to verify the agent is correctly checked in with its designated SLA Monitor server. slaMonitorAgentRegistrationTime would be checked to see how recently the agent re-registered, which could indicate a network interruption if it changes unexpectedly. slaMonitorAgentCliAvailable and slaMonitorAgentCliTimeout/slaMonitorAgentCliTimeoutMode reveal whether remote CLI diagnostic access to the agent is currently permitted and under what timeout policy.

What Can Be Monitored

agent running status
server registration state
registered server address/port
last registration time
CLI access availability and timeout

Imported Objects

From DIFFSERV-DSCP-TC

Dscp

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From RFC1213-MIB

DisplayString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
StorageType

From SYNOPTICS-ROOT-MIB

policy

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
slaMonitorMib	1.3.6.1.4.1.45.4.8			An Avaya management module containing data definitions related to the SLA Monitor Agent.
slaMonitorMibNotifications	1.3.6.1.4.1.45.4.8.0
NTF slaMonitorAgentExceptionDetected	1.3.6.1.4.1.45.4.8.0.1			Indicates that an exception event that impacts the local SLA Monitor agent has been detected.
slaMonitorMibClasses	1.3.6.1.4.1.45.4.8.1
slaMonitorAgtClasses	1.3.6.1.4.1.45.4.8.1.1
INT slaMonitorAgentStatus	1.3.6.1.4.1.45.4.8.1.1.1	INTEGER	read-write	The value of this attribute indicates whether the SLA Monitor agent is enabled or not. An agent that is enabled will respond to SLA Monitor server discovery packets. A disabled agent will remain dormant until manually enabled.
IPt slaMonitorAgentAddressType	1.3.6.1.4.1.45.4.8.1.1.2	InetAddressType	read-only	The type of IP address used by the agent. This object is limited to IPv4 and IPv6 addresses.
IP slaMonitorAgentAddress	1.3.6.1.4.1.45.4.8.1.1.3	InetAddress	read-only	The IP address currently used by the SLA Monitor agent.
INE slaMonitorAgentPort	1.3.6.1.4.1.45.4.8.1.1.4	InetPortNumber	read-only	The UDP port currently used by the SLA Monitor agent for agent-server communication.
INT slaMonitorAgentRegisteredWithServer	1.3.6.1.4.1.45.4.8.1.1.5	INTEGER	read-only	The value of this attribute indicates whether the SLA Monitor agent is registered with an SLA Monitor server or not.
IPt slaMonitorAgentRegisteredServerAddrType	1.3.6.1.4.1.45.4.8.1.1.6	InetAddressType	read-only	The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses.
IP slaMonitorAgentRegisteredServerAddr	1.3.6.1.4.1.45.4.8.1.1.7	InetAddress	read-only	The IP address of the SLA Monitor server with which the agent is currently registered.
INE slaMonitorAgentRegisteredServerPort	1.3.6.1.4.1.45.4.8.1.1.8	InetPortNumber	read-only	The TCP port utilized by the SLA Monitor server with which the agent is currently registered.
U32 slaMonitorAgentRegistrationTime	1.3.6.1.4.1.45.4.8.1.1.9	Unsigned32	read-only	Specifies the maximum amount of time, in seconds, until the current registration period expires.
INT slaMonitorAgentCliAvailable	1.3.6.1.4.1.45.4.8.1.1.10	INTEGER	read-write	The value of this attribute indicates whether the SLA Monitor agent CLI is available or not.
U32 slaMonitorAgentCliTimeout	1.3.6.1.4.1.45.4.8.1.1.11	Unsigned32	read-write	Specifies the maximum amount of time, in seconds, until the CLI session is automatically terminated. The value of this attribute is pertinent only if CLI timeouts are enabled (slaMonitorAgentCliTimeoutMode equals 'enable(1)').
INT slaMonitorAgentCliTimeoutMode	1.3.6.1.4.1.45.4.8.1.1.12	INTEGER	read-write	The value of this attribute indicates whether the SLA Monitor agent automatic CLI session timeout is enabled or not. When this attribute is set to 'enable(1)', a CLI session will automatically timeout after slaMonitorAgentCliTimeout seconds.
BIT slaMonitorAgentSupportedApps	1.3.6.1.4.1.45.4.8.1.1.13	Bits	read-only	An enumeration of the SLA Monitor agent capabilities.
IPt slaMonitorAgentConfiguredAgentAddrType	1.3.6.1.4.1.45.4.8.1.1.14	InetAddressType	read-write	The type of IP address used by the agent. This object is limited to IPv4 and IPv6 addresses.
IP slaMonitorAgentConfiguredAgentAddr	1.3.6.1.4.1.45.4.8.1.1.15	InetAddress	read-write	The IP address of the SLA Monitor agent. If the value of this attribute is 0.0.0.0, the SLA Monitor agent will utilize an active device IP address by default.
INE slaMonitorAgentConfiguredAgentPort	1.3.6.1.4.1.45.4.8.1.1.16	InetPortNumber	read-write	The UDP port utilized by the SLA Monitor agent for agent-server communication. If the value of this attribute is zero, the SLA Monitor agent will utilize a default port value for communication purposes.
IPt slaMonitorAgentConfiguredServerAddrType	1.3.6.1.4.1.45.4.8.1.1.17	InetAddressType	read-write	The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses.
IP slaMonitorAgentConfiguredServerAddr	1.3.6.1.4.1.45.4.8.1.1.18	InetAddress	read-write	The IP address of the SLA Monitor server with which the agent is allowed to register. If the value of this attribute is not 0.0.0.0, the SLA Monitor agent may only respond to server requests originating at the specified IP address (or the IP address specified by the slaMonitorAgentConfiguredAltServerAddr object if it is non-zero).
INE slaMonitorAgentConfiguredServerPort	1.3.6.1.4.1.45.4.8.1.1.19	InetPortNumber	read-write	The TCP port utilized by the SLA Monitor server with which the agent is allowed to register. If the value of this attribute is non-zero, the SLA Monitor agent may only respond to server requests originating from the specified port (or from the port specified by the slaMonitorAgentConfiguredAltServerPort object if it is non-zero).
IPt slaMonitorAgentConfiguredAltServerAddrType	1.3.6.1.4.1.45.4.8.1.1.20	InetAddressType	read-write	The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses.
IP slaMonitorAgentConfiguredAltServerAddr	1.3.6.1.4.1.45.4.8.1.1.21	InetAddress	read-write	The IP address of the alternate SLA Monitor server with which the agent is allowed to register. If the value of this attribute is not 0.0.0.0, the SLA Monitor agent may only respond to server requests originating at the specified IP address (or the IP address specified by the slaMonitorAgentConfiguredServerAddr object if it is non-zero).
INE slaMonitorAgentConfiguredAltServerPort	1.3.6.1.4.1.45.4.8.1.1.22	InetPortNumber	read-write	The TCP port utilized by the alternate SLA Monitor server with which the agent is allowed to register. If the value of this attribute is non-zero, the SLA Monitor agent may only respond to server requests originating from the specified port (or from the port specified by the slaMonitorAgentConfiguredServerPort object if it is non-zero).
INE slaMonitorAgentToAgentPort	1.3.6.1.4.1.45.4.8.1.1.23	InetPortNumber	read-only	The base UDP port currently used by the SLA Monitor agent for agent-agent communication. The base UDP port is used to derive multiple agent communication ports. An even base port values causes slaMonitorAgentToAgentPort and slaMonitorAgentToAgentPort+1 ports to be used. An odd base port values causes slaMonitorAgentToAgentPort and slaMonitorAgentToAgentPort-1 ports to be used.
INE slaMonitorAgentConfiguredAgentToAgentPort	1.3.6.1.4.1.45.4.8.1.1.24	InetPortNumber	read-write	The UDP port utilized by the SLA Monitor agent for agent-agent communication. If the value of this attribute is zero, the SLA Monitor agent will utilize a default port value for the base agent-agent UDP communication port.
INT slaMonitorAgentEncryptionSupport	1.3.6.1.4.1.45.4.8.1.1.25	INTEGER	read-only	Specifies if encrypted agent-server communication is supported by the agent.
STR slaMonitorAgentConfiguredAgentVrfName	1.3.6.1.4.1.45.4.8.1.1.26	DisplayString	read-write	The name of the virtual Router which SLA Monitor Agent IP address (slaMonitorAgentConfiguredAgentAddr) is associated with. This is only supported on VSP9K for now
STR slaMonitorAgentSlaParameter	1.3.6.1.4.1.45.4.8.1.1.27	DisplayString	read-write	String directly passed to the SLA Agent as parameter
INT slaMonitorAgentCertFileInstallAction	1.3.6.1.4.1.45.4.8.1.1.28	INTEGER	read-write	Operation object to install and deinstall the certificate file to a platform specific location. 'noactio' -is default setting and always is returned when this object is queried. 'install', object slaMonitorAgentCertFile will be used as source certificate file to install . 'deinstall', will ignore object slaMonitorAgentCertFile and just deinstall or remove the certificate file from the installed location
STR slaMonitorAgentCertFile	1.3.6.1.4.1.45.4.8.1.1.29	DisplayString	read-write	the certification file name for installation. It is only valid or used when object slaMonitorAgentCertFileInstallAction is set to install. Otherwise, it will be ignored
INT slaMonitorAgentServerBypass	1.3.6.1.4.1.45.4.8.1.1.30	INTEGER	read-write	The value of this attribute determines whether the SLA Monitor agent can perform certain operations without being registered with a server. When this attribute is set to 'enable(1)', an agent will respond to agent-to-agent test requests regardless of the server registration status. A 'disable(2)' setting will restrict agent responses when the agent is not registered with an SLA Monitor server.
INT slaMonitorAgentRefuseServerTests	1.3.6.1.4.1.45.4.8.1.1.31	INTEGER	read-write	The value of this attribute determines whether the SLA Monitor agent will refuse test requests from the server. When this attribute is set to 'allow(1)', an agent will accept test requests from the server. A 'refuse(2)' setting will cause the agent to reject test requests from the server. From a usage perspective, it may be necessary to temporarily refuse server test requests if the agent is being actively managed by a server but the administrator wishes to use the CLI or SNMP interfaces to initiate tests manually.
slaMonitorAgtTestClasses	1.3.6.1.4.1.45.4.8.1.2
slaMonitorNtrCtrlTable	1.3.6.1.4.1.45.4.8.1.2.1		not-accessible	Defines the SLAMon agent NTR test control table supporting the ability to initiate NTR tests remotely. The results of NTR test operations are stored in the slaMonitorNtrResultsTable and the slaMonitorNtrHopsTable.
slaMonitorNtrCtrlEntry	1.3.6.1.4.1.45.4.8.1.2.1.1		not-accessible	Defines an entry in the slaMonitorNtrCtrlTable. The first index element, slaMonitorNtrCtrlOwnerId, is of type SnmpAdminString, allowing for a management application to identify its entries. The second index, slaMonitorNtrCtrlTestName (also an SnmpAdminString), enables the same management application to have multiple requests configured.
STR slaMonitorNtrCtrlOwnerId	1.3.6.1.4.1.45.4.8.1.2.1.1.1	SnmpAdminString	not-accessible	The owner of an NTR test.
STR slaMonitorNtrCtrlTestName	1.3.6.1.4.1.45.4.8.1.2.1.1.2	SnmpAdminString	not-accessible	The name of an NTR test. This value is locally unique, within the scope of an slaMonitorNtrCtrlOwnerId.
IPt slaMonitorNtrCtrlTargetAddressType	1.3.6.1.4.1.45.4.8.1.2.1.1.3	InetAddressType	read-create	Specifies the target address type.
IP slaMonitorNtrCtrlTargetAddress	1.3.6.1.4.1.45.4.8.1.2.1.1.4	InetAddress	read-create	Specifies the target address used for the NTR test. The address type can be determined by examining the value of the corresponding slaMonitorNtrCtrlTargetAddressType. A value for this object MUST be provided during entry creation.
DSC slaMonitorNtrCtrlDscp	1.3.6.1.4.1.45.4.8.1.2.1.1.5	Dscp	read-create	Specifies the DSCP value for use in packets that are generated by the NTR test.
I32 slaMonitorNtrCtrlAttempts	1.3.6.1.4.1.45.4.8.1.2.1.1.6	Integer32	read-create	Specifies the number of attempts are generated by the NTR test.
I32 slaMonitorNtrCtrlPeriod	1.3.6.1.4.1.45.4.8.1.2.1.1.7	Integer32	read-create	Specifies the interval between packets, in microseconds, generated by the NTR test.
INT slaMonitorNtrCtrlAdminStatus	1.3.6.1.4.1.45.4.8.1.2.1.1.8	INTEGER	read-create	Used to initiate an NTR test: enabled(1) - initiate the test as defined by this slaMonitorNtrCtrlEntry. disabled(2) - deactivate the test defined by this slaMonitorNtrCtrlEntry, if possible. Refer to the corresponding slaMonitorNtrResultsOperStatus to determine the operational state of the test defined by this entry. When queried, 'disabled(2)' is always returned for this attribute.
STR slaMonitorNtrCtrlLabel	1.3.6.1.4.1.45.4.8.1.2.1.1.9	SnmpAdminString	read-create	A label used to reference the NTR control entry in a textual manner.
STO slaMonitorNtrCtrlStorageType	1.3.6.1.4.1.45.4.8.1.2.1.1.10	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
ROW slaMonitorNtrCtrlRowStatus	1.3.6.1.4.1.45.4.8.1.2.1.1.11	RowStatus	read-create	This object allows entries to be created and deleted in the slaMonitorNtrCtrlTable. Deletion of an entry in this table results in the deletion of all corresponding (i.e., entries with the same slaMonitorNtrCtrlOwnerId and slaMonitorNtrCtrlTestName index values) entries in the slaMonitorNtrResultsTable and the slaMonitorNtrHopsTable. Initiation of an NTR test corresponding to this entry is controlled via slaMonitorNtrCtrlAdminStatus and not by entry creation. The operational state of an NTR test can be determined by examining the corresponding slaMonitorNtrResultsOperStatus object.
slaMonitorNtrResultsTable	1.3.6.1.4.1.45.4.8.1.2.2		not-accessible	Defines the SLAMon agent NTR results table that is used to track the status of NTR tests initiated through the the slaMonitorNtrCtrlTable. An entry is added to the slaMonitorNtrResultsTable when an NTR test defined by an slaMonitorNtrCtrlEntry is started by transition of its slaMonitorNtrCtrlAdminStatus object to 'enabled(1)'. If the object slaMonitorNtrCtrlAdminStatus has the value 'disabled(2)', then successfully writing 'enabled(1)' to the object slaMonitorNtrCtrlAdminStatus re-initializes an already existing entry in the slaMonitorNtrResultsTable. The values of objects in the re-initialized entry are the same as the values of objects in a new entry would be. An entry is removed from the slaMonitorNtrResultsTable when its corresponding slaMonitorNtrCtrlEntry is deleted.
slaMonitorNtrResultsEntry	1.3.6.1.4.1.45.4.8.1.2.2.1		not-accessible	Defines an entry in the slaMonitorNtrResultsTable. The slaMonitorNtrResultsTable has the same indexing as the slaMonitorNtrCtrlTable so that a slaMonitorNtrResultsEntry corresponds to the slaMonitorNtrCtrlEntry that caused it to be created.
INT slaMonitorNtrResultsOperStatus	1.3.6.1.4.1.45.4.8.1.2.2.1.1	INTEGER	read-only	Reflects the operational state of an slaMonitorNtrCtrlEntry: inProgress(1) - test is active. aborted(2) - test has been stopped. Refer to object slaMonitorNtrResultsAbortData for details. completed(3) - test is completed. Refer to objects slaMonitorNtrResultsCompletionData and slaMonitorNtrResultsCompletionSummary for details.
IPt slaMonitorNtrResultsSrcAddressType	1.3.6.1.4.1.45.4.8.1.2.2.1.2	InetAddressType	read-only	Specifies the address type of the source IP address used for this test.
IP slaMonitorNtrResultsSrcAddress	1.3.6.1.4.1.45.4.8.1.2.2.1.3	InetAddress	read-only	Specifies the source IP address used for this test.
IPt slaMonitorNtrResultsDstAddressType	1.3.6.1.4.1.45.4.8.1.2.2.1.4	InetAddressType	read-only	Specifies the address type of the destination IP address used for this test.
IP slaMonitorNtrResultsDstAddress	1.3.6.1.4.1.45.4.8.1.2.2.1.5	InetAddress	read-only	Specifies the destination IP address used for this test.
INE slaMonitorNtrResultsSrcPort	1.3.6.1.4.1.45.4.8.1.2.2.1.6	InetPortNumber	read-only	Specifies the Layer 4 source port used for this test.
INE slaMonitorNtrResultsDstPort	1.3.6.1.4.1.45.4.8.1.2.2.1.7	InetPortNumber	read-only	Specifies the Layer 4 destination port used for this test.
DSC slaMonitorNtrResultsDscp	1.3.6.1.4.1.45.4.8.1.2.2.1.8	Dscp	read-only	Specifies the DSCP value contained in NTR test packets generated by the agent for this test.
U32 slaMonitorNtrResultsTTL	1.3.6.1.4.1.45.4.8.1.2.2.1.9	Unsigned32	read-only	The maximum time-to-live (TTL) value used during the execution of this test.
BIT slaMonitorNtrResultsCompletionData	1.3.6.1.4.1.45.4.8.1.2.2.1.10	Bits	read-only	Provides details related to test completion. Multiple bits may be set to convey test status.
STR slaMonitorNtrResultsCompletionSummary	1.3.6.1.4.1.45.4.8.1.2.2.1.11	SnmpAdminString	read-only	A user-readable string that is used to convey test results for completed tests in an easy-to-understand format.
BIT slaMonitorNtrResultsAbortData	1.3.6.1.4.1.45.4.8.1.2.2.1.12	Bits	read-only	Provides details for tests that were aborted. Multiple bits may be set to convey test status.
U32 slaMonitorNtrResultsHopCount	1.3.6.1.4.1.45.4.8.1.2.2.1.13	Unsigned32	read-only	The total number of hops for which information has been acquired during the execution of this test.
slaMonitorNtrHopsTable	1.3.6.1.4.1.45.4.8.1.2.3		not-accessible	Defines the SLAMon agent NTR test hop table for keeping track of the results of NTR tests on a per-hop basis.
slaMonitorNtrHopsEntry	1.3.6.1.4.1.45.4.8.1.2.3.1		not-accessible	Defines an entry in the slaMonitorNtrHopsTable. The first two index elements identify the slaMonitorNtrCtrlEntry with which this slaMonitorNtrHopsEntry is associated. The third index element, slaMonitorNtrHopsHopIndex, selects a hop in an NTR test path.
U32 slaMonitorNtrHopsHopIndex	1.3.6.1.4.1.45.4.8.1.2.3.1.1	Unsigned32	not-accessible	Specifies the hop index for an NTR test hop. Values for this object with respect to the same slaMonitorNtrCtrlOwnerId and slaMonitorNtrCtrlTestName MUST start at 1 and be given increasing values for subsequent hops. The value of slaMonitorNtrHopsHopIndex does not necessarily represent the number of the hop on the traced path, though this is normally the case.
IPt slaMonitorNtrHopsTgtAddressType	1.3.6.1.4.1.45.4.8.1.2.3.1.2	InetAddressType	read-only	This object indicates the type of address stored in the corresponding slaMonitorNtrHopsTgtAddress object.
IP slaMonitorNtrHopsTgtAddress	1.3.6.1.4.1.45.4.8.1.2.3.1.3	InetAddress	read-only	This object reports the IP address associated with the NTR test hop.
U32 slaMonitorNtrHopsRtt	1.3.6.1.4.1.45.4.8.1.2.3.1.4	Unsigned32	read-only	The NTR test round-trip-time (RTT), in microseconds, computed for this hop.
DSC slaMonitorNtrHopsIngressDscp	1.3.6.1.4.1.45.4.8.1.2.3.1.5	Dscp	read-only	The DSCP value in the NTR test packet received by the target host (slaMonitorNtrHopsTgtAddress) for this hop.
DSC slaMonitorNtrHopsEgressDscp	1.3.6.1.4.1.45.4.8.1.2.3.1.6	Dscp	read-only	The DSCP value in the NTR test response packet received by the SLAMon agent for this hop.
slaMonitorRtpCtrlTable	1.3.6.1.4.1.45.4.8.1.2.4		not-accessible	Defines the SLAMon agent RTP test control table supporting the ability to initiate RTP tests remotely. The results of RTP test operations are stored in the slaMonitorRtpResultsTable.
slaMonitorRtpCtrlEntry	1.3.6.1.4.1.45.4.8.1.2.4.1		not-accessible	Defines an entry in the slaMonitorRtpCtrlTable. The first index element, slaMonitorRtpCtrlOwnerId, is of type SnmpAdminString, allowing for a management application to identify its entries. The second index, slaMonitorRtpCtrlTestName (also an SnmpAdminString), enables the same management application to have multiple requests configured.
STR slaMonitorRtpCtrlOwnerId	1.3.6.1.4.1.45.4.8.1.2.4.1.1	SnmpAdminString	not-accessible	The owner of an RTP test.
STR slaMonitorRtpCtrlTestName	1.3.6.1.4.1.45.4.8.1.2.4.1.2	SnmpAdminString	not-accessible	The name of an RTP test. This is locally unique, within the scope of an slaMonitorRtpCtrlOwnerId.
IPt slaMonitorRtpCtrlTargetAddressType	1.3.6.1.4.1.45.4.8.1.2.4.1.3	InetAddressType	read-create	Specifies the target address type.
IP slaMonitorRtpCtrlTargetAddress	1.3.6.1.4.1.45.4.8.1.2.4.1.4	InetAddress	read-create	Specifies the target address used for the RTP test. The address type can be determined by examining the value of the corresponding slaMonitorRtpCtrlTargetAddressType. A value for this object MUST be provided during entry creation.
DSC slaMonitorRtpCtrlDscp	1.3.6.1.4.1.45.4.8.1.2.4.1.5	Dscp	read-create	Specifies the DSCP value for use in packets that are generated by the RTP test.
I32 slaMonitorRtpCtrlTestPackets	1.3.6.1.4.1.45.4.8.1.2.4.1.6	Integer32	read-create	Specifies the number of test packets that are generated by the RTP test. Test packets are used for jitter determination.
I32 slaMonitorRtpCtrlSyncPackets	1.3.6.1.4.1.45.4.8.1.2.4.1.7	Integer32	read-create	Specifies the number of synchronization packets that are generated by the RTP test. Sync packets are used for network delay determination.
I32 slaMonitorRtpCtrlPeriod	1.3.6.1.4.1.45.4.8.1.2.4.1.8	Integer32	read-create	Specifies the interval between packets (in microseconds) generated by the RTP test.
INT slaMonitorRtpCtrlAdminStatus	1.3.6.1.4.1.45.4.8.1.2.4.1.9	INTEGER	read-create	Used to initiate an RTP test: enabled(1) - initiate the test as defined by this slaMonitorRtpCtrlEntry. disabled(2) - deactivate the test defined by this slaMonitorRtpCtrlEntry, if possible. Refer to the corresponding slaMonitorRtpResultsOperStatus to determine the operational state of the test defined by this entry. When queried, 'disabled(2)' is always returned for this attribute.
STR slaMonitorRtpCtrlLabel	1.3.6.1.4.1.45.4.8.1.2.4.1.10	SnmpAdminString	read-create	A label used to reference the RTP control entry in a textual manner.
STO slaMonitorRtpCtrlStorageType	1.3.6.1.4.1.45.4.8.1.2.4.1.11	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
ROW slaMonitorRtpCtrlRowStatus	1.3.6.1.4.1.45.4.8.1.2.4.1.12	RowStatus	read-create	This object allows entries to be created and deleted in the slaMonitorRtpCtrlTable. Deletion of an entry in this table results in the deletion of all corresponding (i.e., entries with the same slaMonitorRtpCtrlOwnerId and slaMonitorRtpCtrlTestName index values) entries in the slaMonitorRtpResultsTable. Initiation of an RTP test corresponding to this entry is controlled via slaMonitorRtpCtrlAdminStatus and not by entry creation. The operational state of an RTP test can be determined by examining the corresponding slaMonitorRtpResultsOperStatus object.
slaMonitorRtpResultsTable	1.3.6.1.4.1.45.4.8.1.2.5		not-accessible	Defines the SLAMon agent RTP results table that is used to track the status of RTP tests initiated through the the slaMonitorRtpCtrlTable. An entry is added to the slaMonitorRtpResultsTable when an RTP test defined by an slaMonitorRtpCtrlEntry is started by transition of its slaMonitorRtpCtrlAdminStatus object to 'enabled(1)'. If the object slaMonitorRtpCtrlAdminStatus has the value 'disabled(2)', then successfully writing 'enabled(1)' to the object slaMonitorRtpCtrlAdminStatus re-initializes an already existing entry in the slaMonitorRtpResultsTable. The values of objects in the re-initialized entry are the same as the values of objects in a new entry would be. An entry is removed from the slaMonitorRtpResultsTable when its corresponding slaMonitorRtpCtrlEntry is deleted.
slaMonitorRtpResultsEntry	1.3.6.1.4.1.45.4.8.1.2.5.1		not-accessible	Defines an entry in the slaMonitorRtpResultsTable. The slaMonitorRtpResultsTable has the same indexing as the slaMonitorRtpCtrlTable so that a slaMonitorRtpResultsEntry corresponds to the slaMonitorRtpCtrlEntry that caused it to be created.
INT slaMonitorRtpResultsOperStatus	1.3.6.1.4.1.45.4.8.1.2.5.1.1	INTEGER	read-only	Reflects the operational state of an slaMonitorRtpCtrlEntry: inProgress(1) - test is active. aborted(2) - test has been stopped. Refer to object slaMonitorRtpResultsAbortData for details. completed(3) - test is completed. Refer to objects that contain completed test results (all attributes except slaMonitorRtpResultsAbortData) for details.
IPt slaMonitorRtpResultsSrcAddressType	1.3.6.1.4.1.45.4.8.1.2.5.1.2	InetAddressType	read-only	Specifies the address type of the source IP address used for this test.
IP slaMonitorRtpResultsSrcAddress	1.3.6.1.4.1.45.4.8.1.2.5.1.3	InetAddress	read-only	Specifies the source IP address used for this test.
IPt slaMonitorRtpResultsDstAddressType	1.3.6.1.4.1.45.4.8.1.2.5.1.4	InetAddressType	read-only	Specifies the address type of the destination IP address used for this test.
IP slaMonitorRtpResultsDstAddress	1.3.6.1.4.1.45.4.8.1.2.5.1.5	InetAddress	read-only	Specifies the destination IP address used for this test.
INE slaMonitorRtpResultsSrcPort	1.3.6.1.4.1.45.4.8.1.2.5.1.6	InetPortNumber	read-only	Specifies the Layer 4 source port used for this test.
INE slaMonitorRtpResultsDstPort	1.3.6.1.4.1.45.4.8.1.2.5.1.7	InetPortNumber	read-only	Specifies the Layer 4 destination port used for this test.
DSC slaMonitorRtpResultsDscp	1.3.6.1.4.1.45.4.8.1.2.5.1.8	Dscp	read-only	Specifies the DSCP value contained in RTP test packets generated by the agent for this test.
U32 slaMonitorRtpResultsAverageDelay	1.3.6.1.4.1.45.4.8.1.2.5.1.9	Unsigned32	read-only	The average network delay (RTT) experienced during this test sequence, in microseconds.
U32 slaMonitorRtpResultsMedianDelay	1.3.6.1.4.1.45.4.8.1.2.5.1.10	Unsigned32	read-only	The median network delay (RTT) experienced during this test sequence, in microseconds.
U32 slaMonitorRtpResultsPacketLoss	1.3.6.1.4.1.45.4.8.1.2.5.1.11	Unsigned32	read-only	A count of packets lost during this test sequence.
U32 slaMonitorRtpResultsOutOfOrderArrivals	1.3.6.1.4.1.45.4.8.1.2.5.1.12	Unsigned32	read-only	The number of out-of-order arrivals detected during this test sequence.
U32 slaMonitorRtpResultsJitterQuartile0	1.3.6.1.4.1.45.4.8.1.2.5.1.13	Unsigned32	read-only	The quartile 0 network jitter value, in microseconds, experienced during this test sequence.
U32 slaMonitorRtpResultsJitterQuartile1	1.3.6.1.4.1.45.4.8.1.2.5.1.14	Unsigned32	read-only	The quartile 1 network jitter value, in microseconds, experienced during this test sequence.
U32 slaMonitorRtpResultsJitterQuartile2	1.3.6.1.4.1.45.4.8.1.2.5.1.15	Unsigned32	read-only	The quartile 2 network jitter value, in microseconds, experienced during this test sequence.
U32 slaMonitorRtpResultsJitterQuartile3	1.3.6.1.4.1.45.4.8.1.2.5.1.16	Unsigned32	read-only	The quartile 3 network jitter value, in microseconds, experienced during this test sequence.
U32 slaMonitorRtpResultsJitterQuartile4	1.3.6.1.4.1.45.4.8.1.2.5.1.17	Unsigned32	read-only	The quartile 4 network jitter value, in microseconds, experienced during this test sequence.
BIT slaMonitorRtpResultsAbortData	1.3.6.1.4.1.45.4.8.1.2.5.1.18	Bits	read-only	Provides details for tests that were aborted. Multiple bits may be set to convey test status.
slaMonitorMibConformance	1.3.6.1.4.1.45.4.8.2
slaMonitorMibCompliances	1.3.6.1.4.1.45.4.8.2.1
slaMonitorMibCompliance	1.3.6.1.4.1.45.4.8.2.1.1			Describes the requirements for conformance to the Avaya Networks SLA Monitor Agent MIB.
slaMonitorMibGroups	1.3.6.1.4.1.45.4.8.2.2
slaMonitorAgentConfigGroup	1.3.6.1.4.1.45.4.8.2.2.1			Objects used for SLA Monitor Agent configuration and monitoring.
slaMonitorAgentNtrTestGroup	1.3.6.1.4.1.45.4.8.2.2.2			Objects used for SLA Monitor Agent NTR test execution and results reporting.
slaMonitorAgentRtpTestGroup	1.3.6.1.4.1.45.4.8.2.2.3			Objects used for SLA Monitor Agent RTP test execution and results reporting.

RFC description

Service Level Agreement monitoring agent for network performance testing and measurement reporting.

Start monitoring Avaya IP telephony endpoint or gateway, Avaya SLA Monitor agent host (agent registration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLA-MONITOR-MIB

What Is SLA-MONITOR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description