All MIBs › SHE-BRIDGE-MIB
Organization: Nokia Siemens Networks
Last Updated: 2010-01-18
Description: Nokia Siemens Networks SHE DSLAM bridge port management covering VLAN, MSTP, LAG, IGMP multicast, and QoS queue configuration on hiX-series access nodes
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SHE-BRIDGE-MIB?
SHE-BRIDGE-MIB is a Nokia Siemens Networks vendor MIB for the SHE (Subscriber Home Equipment / DSLAM) hiX-series access node family, covering bridge-port features including VLAN assignment, MSTP spanning tree, link aggregation (LAG), IGMP multicast, and QoS queue configuration at the bridge-port level. It exposes configuration and, where implemented, operational-state data for these Layer 2 bridging features on each access-node bridge port. Its role in monitoring device status is tracking bridge-port operational and spanning-tree/LAG state, which reflects the health of the Layer 2 forwarding plane on the DSLAM -- e.g., a port stuck in an unexpected MSTP blocking state or a LAG member that has dropped out. It depends on the underlying interface/port model of the hiX SHE platform and interacts with standard bridge concepts akin to the IETF BRIDGE-MIB and Q-BRIDGE-MIB. It is deployed on Nokia Siemens Networks (later Nokia) hiX5000-series DSL access multiplexers in telecom broadband access networks. Network engineers evaluating or troubleshooting this functionality can download the SHE-BRIDGE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SHE-BRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia Siemens Networks hiX-series DSLAM access node
Monitoring Examples
No specific object names were provided in the source data for this module, so a concrete OID-level walk cannot be honestly given; based on the module description, a realistic scenario would involve polling per-bridge-port VLAN membership, MSTP port state, and LAG membership to confirm a subscriber-facing or uplink bridge port is forwarding traffic in the expected VLAN and spanning-tree role.
What Can Be Monitored
- bridge port VLAN configuration
- MSTP spanning tree port state
- link aggregation group membership
- IGMP multicast configuration
- QoS queue configuration
This MIB depends on
Related MIBs
Imported Objects
From AN-SHE-MIB
| she | OBJECT-IDENTITY |
From ENTITY-MIB
| PhysicalIndex | |
| entPhysicalIndex | OBJECT-TYPE |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From SHE-ALARMING-MIB
| SheAlarmSevProfileIndex | |
| sheAlarmReportingSource | OBJECT-TYPE |
| sheAlarmReportingSourceType | OBJECT-TYPE |
| sheAlarmSeverity | OBJECT-TYPE |
| sheAlarmTimeAndDate | OBJECT-TYPE |
From SHE-TC-MIB
| SheAdminStateType | |
| SheControlStatusType | |
| SheEnableType | |
| ShePermissionType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sheBridgeMib | 1.3.6.1.4.1.231.7.1.2.2.1.4 | This MIB contains all needed informations about bridgePorts and all supported she bridgeing features. | ||
| sheBridge | 1.3.6.1.4.1.231.7.1.2.2.1.4.1 | |||
| sheBridgeBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1 | |||
| SHE sheBridgeBaseMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.1 | SheBridgeModeType | read-only | The general operating mode of the bridge. |
| SHE sheBridgeBaseTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.2 | SheBridgeTaggingModeType | read-only | The general tagging mode of the bridge. |
| I32 sheBridgeBaseMirrorPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.3 | Integer32 | read-only | The Mirror port of the system. That is a sheBridgePortIndex and it could only be used on ports with bridgePortUsage = uplink. This value should be 0 if no mirror-port is configured in the system |
| I32 sheBridgeBaseOuterPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.4 | Integer32 | read-only | The default PVID of the outer Vlan used by the switch fabric in case of doubleTag-Mode or if a frame with priority tag is received and no other rule to change the vlan tag will match. |
| I32 sheBridgeBaseOuterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.5 | Integer32 | read-only | The default .1p-Priority of the outer vlan in case of doubleTag-Mode. |
| SHE sheBridgeBaseCircuitIdFormat | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.6 | SheBridgeIdType | read-only | The default value should be: '%N %t %S/%P:%p.%c' -> when ATM/DSL is used '%N %t %S/%P:%v' -> when Ethernet/DSL is used It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)! |
| SHE sheBridgeBaseSharedVlanLearning | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.7 | SheBridgeSharedVlanLearningType | read-only | Enable or disable the feature SharedVlanLearning in the NE. |
| SHE sheBridgeBaseRemoteIdFormat | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.8 | SheBridgeIdType | read-only | The default value is: '%M' It is up to the custoumer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)! |
| I32 sheBridgeBaseStagTPID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.9 | Integer32 | read-only | The TPID of the service tag if doubleTag is enabled. |
| SHE sheBridgeBaseMacAntiSpoofing | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.10 | SheBridgeMacAntiSpoofingType | read-only | Enable or disable the feature MacAntiSpoofing in the NE. |
| SHE sheBridgeBaseRoutingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.11 | SheBridgeRoutingModeType | read-only | residential or unrestricted the feature Routing Mode of BridgeBase in the NE. |
| I32 sheBridgeBaseMaxHostName | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.12 | Integer32 | read-only | the maximum length of hostname for circuit-id or remote-id. |
| SHE sheBridgeBaseDlfFilter | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.13 | SheBridgeDlfFilterType | read-only | The policy of DLF (destination lookup failur) unicast packets from uplink. Enable DLF filter -> destination-mac unknown unicast towards subscriber ports blocked Disable DLF filter -> destination-mac unknown unicast towards subscriber ports allowed default:enable |
| SHE sheBridgeBaseUnknownMuticastFilter | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.14 | SheBridgeUnknownMulticastFilterType | read-only | The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction |
| U32 sheBridgeBaseIpoaArpReqInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.15 | Unsigned32 | read-only | The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router. |
| ADR sheBridgeBaseMaxIpUNI | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.16 | SheBridgeMaxIpAddressType | read-only | This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8. |
| sheBridgeBaseControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2 | |||
| SHE sheBridgeBaseControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.1 | SheBridgeControlRequestType | read-write | setBridgeMode: sheBridgeBaseControlMode setBridgeTaggingMode: sheBridgeBaseControlTaggingMode setBridgeMirrorPort: sheBridgeBaseControlMirrorPort setBridgeOuterVlanDefaults: sheBridgeBaseControlOuterPVID sheBridgeBaseControlOuterPriority setBridgeCircuitIdFormat: sheBridgeBaseControlCircuitIdFormat setBridgeSharedVlanLearning: sheBridgeBaseControlSharedVlanLearning setBridgeRemoteIdFormat: sheBridgeBaseControlRemoteIdFormat setBridgeStagTPID: sheBridgeBaseControlStagTPID setBridgeMacAntiSpoofing: sheBridgeBaseControlMacAntiSpoofing setBridgeRoutingMode: sheBridgeBaseControlRoutingMode setBridgeMaxHostName: sheBridgeBaseControlMaxHostName setBridgeDlfFilter: sheBridgeBaseControlDlfFilter setBridgeUnknownMulticastFilter: sheBridgeBaseControlUnknownMulticastFilter setBridgeIpoaArpReqInterval: sheBridgeBaseControlIpoaArpReqInterval |
| SHE sheBridgeBaseControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.2 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgeBaseControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.3 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgeBaseControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgeBaseControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheBridgeBaseControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.6 | SheBridgeModeType | read-write | Set the basic bridge mode. |
| SHE sheBridgeBaseControlTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.7 | SheBridgeTaggingModeType | read-write | Set the basic tagging mode. |
| I32 sheBridgeBaseControlMirrorPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.8 | Integer32 | read-write | Set the mirror port. |
| I32 sheBridgeBaseControlOuterPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.9 | Integer32 | read-write | The PVID of the outer Vlan in case of doubleTag-Mode. |
| I32 sheBridgeBaseControlOuterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.10 | Integer32 | read-write | The default .1p-Priority of the outer vlan in case of doubleTag-Mode. |
| SHE sheBridgeBaseControlCircuitIdFormat | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.11 | SheBridgeIdType | read-write | It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)! |
| SHE sheBridgeBaseControlSharedVlanLearning | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.12 | SheBridgeSharedVlanLearningType | read-write | Enable or disable the feature SharedVlanLearning in the NE. |
| SHE sheBridgeBaseControlRemoteIdFormat | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.13 | SheBridgeIdType | read-write | It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)! |
| I32 sheBridgeBaseControlStagTPID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.14 | Integer32 | read-write | The TPID of the service tag if doubleTag is enabled |
| SHE sheBridgeBaseControlMacAntiSpoofing | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.15 | SheBridgeMacAntiSpoofingType | read-write | Enable or disable the feature MacAntiSpoofing in the NE. |
| SHE sheBridgeBaseControlRoutingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.16 | SheBridgeRoutingModeType | read-write | residential or unrestricted the feature Routing Mode of BridgeBase in the NE. |
| I32 sheBridgeBaseControlMaxHostName | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.17 | Integer32 | read-write | the maximum length of hostname for circuit-id or remote-id. |
| SHE sheBridgeBaseControlDlfFilter | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.18 | SheBridgeDlfFilterType | read-write | The policy of DLF unicast packets from uplink. |
| SHE sheBridgeBaseControlUnknownMulticastFilter | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.19 | SheBridgeUnknownMulticastFilterType | read-write | The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction |
| U32 sheBridgeBaseControlIpoaArpReqInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.20 | Unsigned32 | read-write | The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router. |
| ADR sheBridgeBaseControlMaxIpUNI | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.21 | SheBridgeMaxIpAddressType | read-write | This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8. Not configurable with current release! |
| sheBridgePortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3 | not-accessible | The bridgePort-Table. | |
| sheBridgePortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1 | not-accessible | One entry for every bridgePort of the system. | |
| U32 sheBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.1 | Unsigned32 | read-only | A bridgePort-identifier. |
| NUM sheSubLayerIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.2 | InterfaceIndex | read-only | IfIndex of the underlaying Interface in the interface-table, Also LAG-bridgePorts will be modeled in the interface table. |
| I32 sheSubLayerCircuit | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.3 | Integer32 | read-only | Only used in case the bridgePort represents a PVC, otherwise equal 0. This value represent the the index for sheAdslVccTpTable, sheXdslVccTpTable or sheShdslVccTpTable depending on ifType of underlaying physical interface. This index was build by the following rule: index = (SubLayerIndex << 4) + Vcc-Number Lowest value for she is 0x0651 (ifIndex = 101 and Vcc-Number 1). Highest value for she is 0x6EC8 (ifIndex = 1772 and Vcc-Number 8). |
| I32 sheBridgePortPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.4 | Integer32 | read-only | The PVID of the port. Possible range is 1-4093 for subscriber ports. This value points to the corresponding vlanIndex of the sheVlanTable. The default value for subscriber bridgePorts is the ifIndex of the underlaying physical interface (sublayerindex). Uplink and LAG bridgePorts use PVID 1 as default. |
| I32 sheBridgePortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.5 | Integer32 | read-only | Default Priority of the bridgePort. |
| SHE sheBridgePortUsage | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.6 | SheBridgePortUsageType | read-only | defaults: Dsl PVC : subscriber Adsl special: vccAggregatorNotUsed Uplink : upLink Lag : notUsed If upLink-Port is aggregated, the upLink state moves to aggregated and the Lag moves to uplink. If a physical bonding is used (Shdsl 4wire/6wire/8wire done over shdsl configuration, m-pair bonding), the master bridgeport changes his usage to physbondedSubscriber and all other members to notUsed. If a gbond bonding is used (via she-bonding-mib configuration), the master bridgeport-entry of the new bonding port changes his usage to bondingSubscriber and all other members of bonding port to bondingNotUsed. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes. |
| SHE sheBridgePortHostConfigurationProtocol | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.7 | SheHostConfigurationProtocolType | read-only | Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). useDHCPandPPPoE(3). |
| OCT sheBridgePortCircuitId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.8 | OCTET STRING | read-only | Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseCircuitIdFormat will be used. |
| I32 sheBridgePortMaxLearnPermitCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.9 | Integer32 | read-only | Number of dynamic learned Mac addresses per port. The valid configuration range for dynamic MacAddress learning is 1..2147483647 (0x7fffffff). A value of -1 disable the MacAddress limitation (default for uplink) -> 'No Limit'. A value of 0 disable the dynamic MacAddress learning -> 'Disabled'. Static FdbTable entrys possible. Additional limitations depending on the used CXU or IU type are possible. The default setting for subscriber ports is 16. Note: Syntax modified with R2.8 BFR 2.0. |
| OCT sheBridgePortMcastGroupPackageList | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.10 | OCTET STRING | read-only | That is a list of allowed corresponding indices of the sheIgmpMcastGroupPackageTable for this subscriber. Each index has 16 bit. If no packet is assigned, the string has 0 length. |
| SHE sheBridgePortMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.11 | SheBridgePortModeType | read-only | Mode of this bridgeport useIpoE, useIpoA, usePPPoA or useAuto. useIpoE is the default setting. This mode will also support PPPoE. useIPoA is only possible for IU_ADSL or IU_SHDSL boards. If no MacAddress is configured in the corresponding MacProfileTable-entry, the NE will autogenerate a own value. In case of usePPPoA, the IU will translate the PPPoA protocol to PPPoE. This configuration is only valid for bridgeports with SubLayerIndex placed on IU_ADSL72 with IFX chipset! A SrcMac-address in sheBridgeIUProfileTable has to be configured for the IU where these port is placed on. The configuration useAuto forces the IU to start a autodetection mode for supporting PPPoA or PPPoE. |
| SHE sheBridgePortTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.12 | SheBridgePortTaggingModeType | read-only | Tagging modes for bridgePort's. This modes are only valid for received frames. Tagging of transmitted frames depends on the bridgeBase-tagging mode and on the vlan-membership. off(0) Untagged frames are tagged with PVID and forwarded. Tagged frames are forwarded unchanged. That is the default value for uplink port's and should not be changed. tagged(1) Frames tagged with the configured VIDs are forwarded unchanged. Untagged frames and frames with unknown VIDs are dropped. Check sheBridgePortReplaceTag value if a received tag should be replaced by PVID. untagged(2) Untagged frames are tagged with PVID and forwarded. Tagged frames are dropped. That is the default value for subscriber port's. NOTE: SHE releases older then R2.5 will only support modes (0) and (1). |
| OCT sheBridgePortRemoteId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.13 | OCTET STRING | read-only | Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseRemoteIdFormat will be used. |
| I32 sheBridgePortInnerPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.14 | Integer32 | read-only | The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is 1. |
| I32 sheBridgePortReplaceVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.15 | Integer32 | read-only | If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature. Only valid if the Bridgeport is running tagged(1) mode - otherwise must be zero. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted! |
| I32 sheBridgePortInnerPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.16 | Integer32 | read-only | The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is 0. |
| IP sheBridgePortIpoaProviderRouterIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.17 | IpAddress | read-only | The IPoA provider edge router's ip address for this bridgePort. 0.0.0.0 is also a valid setting and force the NE together with a similar entry in sheArpFixedIpAddressTable to retrieve the needed information automatically. |
| I32 sheBridgePortPppoaSessionId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.18 | Integer32 | read-only | The session id from a PPP server is for the PPPoA session. |
| U32 sheBridgePortMcastMaxJoinedGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.19 | Unsigned32 | read-only | The maximum number of multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. This configuration is only valid for bridgeports with usage 'subscriber'. |
| SHE sheBridgePortMcastLeaveMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.20 | SheMcastLeaveMode | read-only | If normal leave is enabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If fast leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. New with R2.8: If ehtMode ('explicit host tracking') is enabled, the multicaststream will only be deleted from FDB if all members of this stream has send her leave. |
| SHE sheBridgePortMcastEHTMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.21 | SheEnableType | read-only | Enables or disables the 'explicit host tracking' function. If enabled and fastleave-mode is also running, the multicaststream will only be deleted from FDB if all members of this stream has send her leave. Note: Functionality bundled in McastLeaveMode with SHE R2.8. |
| SHE sheBridgePortIgmpSubscriberAccessMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.22 | SheBridgePortIgmpSubscriberAccessModeType | read-only | When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification. |
| SHE sheBridgePortInnerPriorityOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.23 | SheBridgePortPriorityOptionType | read-only | This parameter configures the handling of the inner vlan tag in the doubleTagged scenario. In singleTagged Mode, this parameter definition is not used. If tagged frames are received set the .1p priority bits of this tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortInnerPriority) If a tag is added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortInnerPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortInnerPriority) New parameters with SHE R2.7 Expanded with R2.8. |
| SHE sheBridgePortOuterPriorityOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.24 | SheBridgePortPriorityOptionType | read-only | This parameter configures the handling of the outer vlan tag in the doubleTagged and singleTagged scenario. doubleTagged Scenario: If tagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> copy .1p priority from the assigned inner .1p priority (inner to outer) force(3) -> per port configured .1p (sheBridgePortPriority) If two tag's are added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) singleTagged Scenario: If tagged frames are received set the .1p priority bits of the tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortPriority) If untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) New parameters with SHE R2.7 Expanded with R2.8. |
| U32 sheBridgePortPriorityMapIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.25 | Unsigned32 | read-only | This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the IU specific assignment via sheBridgeIUDscpPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IUs could only support ONE profile for all ports were these mapping should be used!! New parameter with SHE R2.8. |
| ADR sheBridgePortIpAddressPermitCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.26 | SheBridgeMaxIpAddressType | read-only | Maximum number of possible IpAddresses per BridgePort. The assignment could be done via DHCP or fixedIpAddress configuration. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Additional restrictions could be possible in case of using IpAntispoofing feature. New parameter with SHE R2.8. |
| T/F sheBridgePortMatEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.27 | TruthValue | read-only | Enable or disable the MAC address translation feature on bridgePort base. New parameter with SHE R2.8. |
| SHE sheBridgePortIpAsMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.28 | SheBridgePortIpAsModeType | read-only | This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8. |
| U32 sheBridgePortEtypeVlanMapProfilePtr | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.29 | Unsigned32 | read-only | Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. Note: The bridgeport has to be untagged member of the mapped vlan, assigned via these profile. New parameter with SHE R2.8. |
| sheBridgePortControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4 | |||
| SHE sheBridgePortControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.1 | SheBridgeControlRequestType | read-write | setBridgePortVLANDefaults: sheBridgePortControlIndex sheBridgePortControlPVID sheBridgePortControlPriority setBridgePortUsage: sheBridgePortControlIndex sheBridgePortControlUsage setBridgePortHostConfigurationProtocol: sheBridgePortControlIndex sheBridgePortControlHostConfigurationProtocol sheBridgePortControlCircuitId setBridgePortMaxLearnPermitCount: sheBridgePortControlIndex sheBridgePortControlMaxLearnPermitCount setBridgePortMcastGroupPackageList: sheBridgePortControlIndex sheBridgePortControlMcastGroupPackageList setBridgePortFeature: sheBridgePortControlIndex sheBridgePortControlMode sheBridgePortControlTaggingMode sheBridgePortControlReplaceTag setBridgePortCircuitId: sheBridgePortControlIndex sheBridgePortControlCircuitId setBridgePortRemoteId: sheBridgePortControlIndex sheBridgePortControlRemoteId clearBridgePortCircuitId: sheBridgePortControlIndex clearBridgePortRemoteId: sheBridgePortControlIndex setBridgePortInnerPVID: sheBridgePortControlIndex sheBridgePortControlInnerPVID setBridgePortInnerPriority: sheBridgePortControlIndex sheBridgePortControlInnerPriority setBridgePortIpoaProviderRouterIpAddress: sheBridgePortControlIndex sheBridgePortControlIpoaProviderRouterIpAddress setBridgePortMcastParameter: sheBridgePortControlIndex sheBridgePortControlMcastMaxJoinedGroup sheBridgePortControlMcastLeaveMode sheBridgePortControlMcastEHTMode (obsolete with R2.8) setBridgePortIgmpSubscriberAccessMode sheBridgePortControlIndex sheBridgePortControlIgmpSubscriberAccessMode New with R2.7: setBridgePortPriorityOptions sheBridgePortControlIndex sheBridgePortControlInnerPriorityOption sheBridgePortControlOuterPriorityOption sheBridgePortControlPriorityMapIndex (new with R2.8) New with R2.8: setBridgePortMatEnabled sheBridgePortControlIndex sheBridgePortControlMatEnabled setBridgePortIpAddressPermitCount sheBridgePortControlIndex sheBridgePortControlIpAddressPermitCount setBridgePortIpAsMode (165) sheBridgePortControlIndex sheBridgePortControlIpAsMode ->sheBridgePortIpAsModeModified setBridgePortEtypeVlanMapping (166) sheBridgePortControlIndex sheBridgePortControlEtypeVlanMapProfilePtr ->sheBridgePortEtypeVlanMappingModified |
| I32 sheBridgePortControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.2 | Integer32 | read-write | The index of the bridgePort to be configured. |
| SHE sheBridgePortControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgePortControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgePortControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgePortControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheBridgePortControlPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.7 | Integer32 | read-write | The PVID for that port. |
| I32 sheBridgePortControlPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.8 | Integer32 | read-write | Set the default port priority. |
| SHE sheBridgePortControlUsage | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.9 | SheBridgePortUsageType | read-write | Only the values uplink, cascading, and subcascading could be interchanged. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes. All other changes will be done by NE automatically based on other configurations. |
| SHE sheBridgePortControlHostConfigurationProtocol | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.10 | SheHostConfigurationProtocolType | read-write | Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). |
| I32 sheBridgePortControlMaxLearnPermitCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.11 | Integer32 | read-write | look at table. Note: Syntax modified with R2.8 BFR 2.0. |
| OCT sheBridgePortControlMcastGroupPackageList | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.12 | OCTET STRING | read-write | This bridgePort is user of this MCastGroup-Package. |
| OCT sheBridgePortControlCircuitId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.13 | OCTET STRING | read-write | Look at table. |
| SHE sheBridgePortControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.14 | SheBridgePortModeType | read-write | Look at table. |
| SHE sheBridgePortControlTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.15 | SheBridgePortTaggingModeType | read-write | Look at table. |
| OCT sheBridgePortControlRemoteId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.16 | OCTET STRING | read-write | Look at table. |
| I32 sheBridgePortControlInnerPVID | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.17 | Integer32 | read-write | The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is the bridgePortIndex +1. |
| I32 sheBridgePortControlReplaceVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.18 | Integer32 | read-write | Configure a Vlan-Tag which should be replaced by PVID. Check table entry for details. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted! |
| I32 sheBridgePortControlInnerPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.19 | Integer32 | read-write | The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is the '0'. |
| IP sheBridgePortControlIpoaProviderRouterIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.20 | IpAddress | read-write | look at table |
| U32 sheBridgePortControlMcastMaxJoinedGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.21 | Unsigned32 | read-write | The maximum number of multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. |
| SHE sheBridgePortControlMcastLeaveMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.22 | SheMcastLeaveMode | read-write | Modify subscriber leave mode. |
| SHE sheBridgePortControlMcastEHTMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.23 | SheEnableType | read-write | Enables or disables the 'explicit host tracking' function. NOTE: Functionality bundled in McastLeaveMode with SHE R2.8. Will not longer used by R2.8. |
| SHE sheBridgePortControlIgmpSubscriberAccessMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.24 | SheBridgePortIgmpSubscriberAccessModeType | read-write | When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification. |
| SHE sheBridgePortControlInnerPriorityOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.25 | SheBridgePortPriorityOptionType | read-write | look at table. |
| SHE sheBridgePortControlOuterPriorityOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.26 | SheBridgePortPriorityOptionType | read-write | look at table. |
| U32 sheBridgePortControlPriorityMapIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.27 | Unsigned32 | read-write | look at table |
| ADR sheBridgePortControlIpAddressPermitCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.28 | SheBridgeMaxIpAddressType | read-write | look at table description. |
| T/F sheBridgePortControlMatEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.29 | TruthValue | read-write | Enable or disable the MAC address translation feature on bridgePort base. |
| SHE sheBridgePortControlIpAsMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30 | SheBridgePortIpAsModeType | read-write | This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8. |
| U32 sheBridgePortControlEtypeVlanMapProfilePtr | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.31 | Unsigned32 | read-write | Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. New parameter with SHE R2.8. |
| sheBridgePortNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5 | |||
| NTF sheBridgeBaseParamModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.1 | Configuration notification. | ||
| NTF sheBridgePortCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.2 | A new bridgePort was created. | ||
| NTF sheBridgePortDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.3 | A bridgePort was deleted. | ||
| NTF sheBridgePortVlanDefaultsModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.4 | Configuration notification. | ||
| NTF sheBridgePortUsageModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.5 | BridgePort usage modified. | ||
| NTF sheBridgePortHostConfigurationProtocolModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.6 | Configuration notification. | ||
| NTF sheBridgePortMaxLearnPermitCountModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.7 | Configuration notification. | ||
| NTF sheBridgePortMcastGroupPackageListModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.8 | Configuration notification. | ||
| NTF sheBridgePortFeatureModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.9 | Configuration notification. | ||
| NTF sheBridgeMacProfileSrcMacAddressModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.10 | Configuration notification. | ||
| NTF sheBridgePortCircuitIdModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.11 | send trap when bridgeport circuitid is set. | ||
| NTF sheBridgePortRemoteIdModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.12 | send trap when bridgeport remoteid is set. | ||
| NTF sheBridgePortCircuitIdCleared | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.13 | send trap when bridgeport circuitid is cleared. | ||
| NTF sheBridgePortRemoteIdCleared | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.14 | send trap when bridgeport remoteid is cleared. | ||
| NTF sheBridgePortInnerPVIDModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.15 | send trap when bridgeport inner PVID is set. | ||
| NTF sheBridgePortInnerPriorityModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.16 | send trap when bridgeport inner priority is set. | ||
| NTF sheBridgePortIpoaProviderRouterIpAddressModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.17 | send trap when bridgeport IPoA provider edge router's ip address is set. | ||
| NTF sheBridgePortMcastParameterModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.18 | send trap when bridgeport mcast parameter is set. | ||
| NTF sheBridgePortIgmpSubscriberAccessModeModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.19 | send trap when bridgeport igmp subscriber Access mode is set. | ||
| NTF setBridgePortPriorityOptionsModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.20 | send trap when configuration of PriorityOptions parameters was modified | ||
| NTF sheBridgePortMatEnabledModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.21 | send trap when configuration of MatEnabled on BridgePort base was modified | ||
| NTF sheBridgePortIpAddressPermitCountModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.22 | send trap when configuration of permit count for DHCP was modified | ||
| NTF sheBridgePortPrioMapEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.23 | a complete entry (64 dscp entries) with a default mapping is created | ||
| NTF sheBridgePortPrioMapEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.24 | a complete entry (64 dscp entries) is deleted | ||
| NTF sheBridgePortPrioMapEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.25 | a single dscp entry is modified | ||
| NTF sheBridgePortExtMCastParameterModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.28 | send trap when bridgeport R2.8 mcast parameter are set. | ||
| NTF sheEtypeVlanMapProfEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.29 | A new sheBridgePortEtypeVlanMapProfile was created in the NE. New with SHE R2.8. | ||
| NTF sheEtypeVlanMapProfEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.30 | A sheBridgePortEtypeVlanMapProfile was modified in the NE. New with SHE R2.8. | ||
| NTF sheEtypeVlanMapProfEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.31 | A sheBridgePortEtypeVlanMapProfile was deleted in the NE. New with SHE R2.8. | ||
| NTF sheBridgePortIpAsModeModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.32 | The bridgePort specific IpAs mode was modified. | ||
| NTF sheBridgePortEtypeVlanMappingModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.33 | The bridgePort specific EthertypeVlanMapping profile assignment was modified. | ||
| NTF sheBridgeExtResidentialModeModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.40 | The port specific ext-residential mode was modified. | ||
| sheBridgeMacProfileTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6 | not-accessible | Description. | |
| sheBridgeMacProfileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1 | not-accessible | Needed for feature IpoA. Configure the used Mac-Address if this bridgeport is running in IpoA-Mode. | |
| OCT sheBridgeMacProfileSrcMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1.1 | OCTET STRING | read-only | The used Src-MacAddress if this port is running in IpoA - mode. If address 000000 is set, the NE will autogenerate a valid mac-address. |
| sheBridgeMacProfileControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7 | |||
| SHE sheBridgeMacProfileControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.1 | SheBridgeControlRequestType | read-write | setBridgeMacProfileSrcMacAddress: sheBridgeMacProfileControlIndex sheBridgeMacProfileControlSrcMacAddress |
| I32 sheBridgeMacProfileControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.2 | Integer32 | read-write | The index of the bridgePort to be configured. |
| SHE sheBridgeMacProfileControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgeMacProfileControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgeMacProfileControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgeMacProfileControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheBridgeMacProfileControlSrcMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.7 | OCTET STRING | read-write | look at table. |
| sheBridgeIUConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8 | |||
| sheBridgeIUProfileTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1 | not-accessible | Description. | |
| sheBridgeIUProfileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1 | not-accessible | Needed to configure some IU specific settings. Index should be the entPhysicalIndex of the IU. | |
| OCT sheBridgeIUPPPoASrcMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.1 | OCTET STRING | read-only | The used Src-MacAddress for this IU if one of her port's is running in PPPoA - mode. The PPPoA session is translated to PPPoE. This configuration should be made before a port could be switched to PPPoA - mode. |
| SHE sheBridgeIUProfileUsedMATBasis | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.2 | SheBridgeIUProfileUsedMATBasisType | read-only | This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8. |
| I32 sheBridgeIUReplaceVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.3 | Integer32 | read-only | If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport. |
| U32 sheBridgeIUDscpPriorityMapIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.4 | Unsigned32 | read-only | This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the port specific assignment via sheBridgePortPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IUs could only support ONE profile for all ports were these mapping should be used!! New parameter with SHE R2.8. |
| sheBridgeIUProfileControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2 | |||
| SHE sheBridgeIUProfileControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.1 | SheBridgeControlRequestType | read-write | setBridgeIUProfilePPPoASrcMacAddress (131): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlPPPoASrcMacAddress New with R2.8: setBridgeIUProfileUsedMATBasis (132): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlUsedMATBasis setBridgeIUProfileReplaceVlanTag (133): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlReplaceVlanTag setBridgeIUProfileDscpPriorityMapProfileIndex (134): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlDscpPriorityMapIndex |
| PHY sheBridgeIUProfileControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.2 | PhysicalIndex | read-write | The index of the IU to be configured. |
| SHE sheBridgeIUProfileControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgeIUProfileControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgeIUProfileControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgeIUProfileControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheBridgeIUProfileControlPPPoASrcMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.7 | OCTET STRING | read-write | look at table. |
| SHE sheBridgeIUProfileControlUsedMATBasis | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.8 | SheBridgeIUProfileUsedMATBasisType | read-write | This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8. |
| I32 sheBridgeIUProfileControlReplaceVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.9 | Integer32 | read-write | If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport. |
| U32 sheBridgeIUProfileControlDscpPriorityMapIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.10 | Unsigned32 | read-write | look at table |
| sheBridgeIUNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3 | |||
| NTF sheBridgeIUProfilePPPoASrcMacAddressModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.1 | Configuration notification. | ||
| NTF sheBridgeIUProfileUsedMATBasisModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 | Configuration notification. | ||
| NTF sheBridgeIUProfileReplaceVlanTagModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.3 | Configuration notification. | ||
| NTF sheBridgeIUProfileDscpPriorityMapProfileIndexModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.4 | Configuration notification. | ||
| sheBridgePortPriorityMapConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9 | |||
| sheBridgePortPriorityMapTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1 | not-accessible | A mapping profile DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the profile number. The second table index and the mapping key is the DSCP field. One default profile with index 1 always exist and can't be deleted but modified. | |
| sheBridgePortPriorityMapEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1 | not-accessible | A mapping entry DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the entry index. The second table index and the mapping key is the DSCP field. One default mapping entry with index 1 always exist and can't be deleted but modified. | |
| U32 sheBridgePortPriorityMapEntryIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.1 | Unsigned32 | read-only | The number of the mapping profile is the first table index. |
| U32 sheBridgePortPriorityMapDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.2 | Unsigned32 | read-only | Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64). |
| U32 sheBridgePortPriorityMapPrio | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.3 | Unsigned32 | read-only | The .1p priority bits in the VLAN tag is the mapping value. |
| sheBridgePortPriorityMapControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2 | |||
| SHE sheBridgePortPrioMapControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.1 | SheBridgeControlRequestType | read-write | One default mapping entry with index 1 always exist and can't be deleted but modified. createBridgePortPrioMapEntry - a complete profile (64 entries) with a default mapping is created deleteBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex - a complete profile (64 entries) is deleted modifyBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex sheBridgePortPrioMapControlDscp sheBridgePortPrioMapControlPrio - a single entry of a profile is modified |
| U32 sheBridgePortPrioMapControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.2 | Unsigned32 | read-write | The number of the mapping entry is the first table index. |
| SHE sheBridgePortPrioMapControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgePortPrioMapControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgePortPrioMapControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgePortPrioMapControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheBridgePortPrioMapControlDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.7 | Unsigned32 | read-write | Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64). |
| U32 sheBridgePortPrioMapControlPrio | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.8 | Unsigned32 | read-write | The .1p priority bits in the VLAN tag is the mapping value. |
| sheBridgePortMCastConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10 | |||
| sheBridgePortMCastConfigTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1 | not-accessible | This table contain all new defined bridgePort specific multicast configurations. New supported with SHE R2.8! | |
| sheBridgePortMCastConfigEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1 | not-accessible | The MCast configuration settiongs per BridgePort. | |
| U32 sheBridgePortMCastBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.1 | Unsigned32 | read-only | This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 65535 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control - default). New parameter with SHE R2.8. |
| U32 sheBridgePortMCastMinUCBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.2 | Unsigned32 | read-only | This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8. |
| U32 sheBridgePortMCastMaxJoinedNonPremiumGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.3 | Unsigned32 | read-only | The maximum number of non-premium multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8. |
| U32 sheBridgePortMCastRemainBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.4 | Unsigned32 | read-only | It is the remaining multicast bandwidth of a bridge port. New parameter with SHE R2.8. |
| SHE sheBridgePortMCastACStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.5 | SheBridgePortACStatus | read-only | It indicates the AC (admission control) status of a bridgeport, It can be accept or deny. When it is accepted, it indicates the bridgeport still has enough bandwidth for multicast access. When it is denied, it indicates the bridgeport is short of bandwidth for multicast access. 1 means accept, 0 means deny. New parameter with SHE R2.8. |
| sheBridgePortMCastControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2 | |||
| SHE sheBridgePortMCastControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.1 | SheBridgeControlRequestType | read-write | setBridgePortExtMCastParameter(162): sheBridgePortMCastControlIndex sheBridgePortMCastControlBandwithLimit sheBridgePortMCastControlMinUCBandwithLimit sheBridgePortMCastControlMaxJoinedNonPremiumGroup |
| I32 sheBridgePortMCastControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.2 | Integer32 | read-write | The index of the bridgePort to be configured. |
| SHE sheBridgePortMCastControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgePortMCastControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgePortMCastControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgePortMCastControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheBridgePortMCastControlBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.11 | Unsigned32 | read-write | This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 655353 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control). New parameter with SHE R2.8. |
| U32 sheBridgePortMCastControlMinUCBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.12 | Unsigned32 | read-write | This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8. |
| U32 sheBridgePortMCastControlMaxJoinedNonPremiumGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.13 | Unsigned32 | read-write | The maximum number of non-premium multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8. |
| sheBridgePortEtherTypeConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11 | |||
| sheBridgePortEtypeVlanMapTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1 | not-accessible | This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index. | |
| sheBridgePortEtypeVlanMapEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1 | not-accessible | This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index. | |
| U32 sheBridgePortEtypeVlanMapProfIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.1 | Unsigned32 | read-only | The Ethertype-VLAN mapping profile index. |
| OCT sheBridgePortEtypeVlanMapEthertype | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.2 | OCTET STRING | read-only | That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged. |
| U32 sheBridgePortEtypeVlanMapVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.3 | Unsigned32 | read-only | A VLAN identifier mapped to the Ethertype's. |
| U32 sheBridgePortEtypeVlanMapPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.4 | Unsigned32 | read-only | The priority part of the VLAN tag mapped to the Ethertype's. |
| sheBridgePortEtypeVlanMapControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2 | |||
| SHE sheBridgePortEtypeVlanMapControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.1 | SheBridgeControlRequestType | read-write | the command to be executed createEtypeVlanMapProfEntry (171) sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryCreated modifyEtypeVlanMapProfEntry (172) sheBridgePortEtypeVlanMapCtrlProfIndex sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryModified deleteEtypeVlanMapProfEnty (173) sheBridgePortEtypeVlanMapCtrlProfIndex ->sheEtypeVlanMapProfEntryDeleted |
| SHE sheBridgePortEtypeVlanMapControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheBridgePortEtypeVlanMapControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.3 | Unsigned32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgePortEtypeVlanMapControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgePortEtypeVlanMapControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheBridgePortEtypeVlanMapCtrlProfIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.6 | Unsigned32 | read-write | The Ethertype-VLAN mapping profile index (first index). |
| OCT sheBridgePortEtypeVlanMapCtrlEthertype | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.7 | OCTET STRING | read-write | That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value. The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged. |
| U32 sheBridgePortEtypeVlanMapCtrlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.8 | Unsigned32 | read-write | A VLAN identifier mapped to the Ethertype's. |
| U32 sheBridgePortEtypeVlanMapCtrlPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.9 | Unsigned32 | read-write | The priority part of the VLAN tag mapped to the Ethertype's. |
| sheBridgeExtResidentialConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99 | |||
| sheBridgeExtResidentialTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1 | not-accessible | Only supported by SHE hiX5608 !! Table index is the ifIndex of uplink or trunk interfaces. | |
| sheBridgeExtResidentialEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1 | not-accessible | Description. | |
| SHE sheBridgeExtResidentialMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.1 | SheEnableType | read-only | A ext-residential mode: enable/disable |
| SHE sheBridgeExtResidentialState | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.2 | SheBridgePortUsageType | read-only | Operative role of the port. (uplink,cascading,aggregated,notUsed, ...) |
| sheBridgeExtResidentialControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2 | |||
| SHE sheBridgeExtResidentialControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.1 | SheBridgeControlRequestType | read-write | New with R2.8 - Only supported by SHE hiX5608 !!: setExtResidentialMode (990): sheBridgeExtResidentialControlPortIndex sheBridgeExtResidentialControlMode ->sheBridgeExtResidentialModeModified |
| SHE sheBridgeExtResidentialControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.2 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheBridgeExtResidentialControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.3 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheBridgeExtResidentialControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheBridgeExtResidentialControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| NUM sheBridgeExtResidentialControlPortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.6 | InterfaceIndex | read-write | Set the port index. |
| SHE sheBridgeExtResidentialControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.7 | SheEnableType | read-write | Set the ext-residential mode. |
| sheBridgeConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100 | |||
| sheBridgeCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1 | |||
| sheBridgeCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1.1 | Description. | ||
| sheBridgeGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2 | |||
| sheBridgeBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.1 | Description. | ||
| sheBridgeBaseControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.2 | Description. | ||
| sheBridgePortGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.3 | Description. | ||
| sheBridgePortControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.4 | Description. | ||
| sheBridgeNotificationsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.5 | Description. | ||
| sheBridgeMacProfileGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.6 | Description. | ||
| sheBridgeIUProfileGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.7 | Description. | ||
| sheBridgeIUNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.8 | Description. | ||
| sheBridgePortPriorityMapGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.9 | Description. | ||
| sheBridgePortMCastGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.10 | Description. | ||
| sheBridgePortMCastNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.11 | Description. | ||
| sheBridgePortObsoleteGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.12 | Description. | ||
| sheBridgePortEtypeGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.14 | Description. | ||
| sheBridgeObsoleteNotificationsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.15 | Description. | ||
| sheBridgeExtResidentialGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.16 | Description. | ||
| sheVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.2 | |||
| sheVlanTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1 | not-accessible | The vlanTable. | |
| sheVlanEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1 | not-accessible | One entry for every existing vlan in the system. | |
| I32 sheVlanIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.1 | Integer32 | read-only | A vlan-identifier. |
| OCT sheVlanName | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.2 | OCTET STRING | read-only | A descriptional name for that vlan. Spaces and other special characters (: ?) are not allowed!! |
| SHE sheVlanStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.3 | SheVlanStatusType | read-only | static, in future gvrp values: static(1), dynamic(2) |
| OCT sheVlanEgressPorts | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.4 | OCTET STRING | read-only | Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet. |
| OCT sheVlanUnTaggedPorts | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.5 | OCTET STRING | read-only | Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet. |
| U32 sheVlanFdbId | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.6 | Unsigned32 | read-only | First index of the used Filtering Table. The value would be in current implementation identical to the VlanIndex. |
| TIK sheVlanCreationTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.7 | TimeTicks | read-only | Only useful in case of gvrp. |
| SHE sheVlanMulticastPermission | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.8 | ShePermissionType | read-only | Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic. |
| U32 sheVlanDhcpProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.9 | Unsigned32 | read-only | Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a DHCP or PPPoE provider vlan (sheDhcpVlanId). |
| OCT sheVlanDefaultGateway | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.10 | OCTET STRING | read-only | Only needed if this VLAN is used as subscriber Vlan (PVID for a bridgeport) and the corresponding bridgeport use IpoA mode. Otherwise don't care. NOTE: Configuration not longer needed with R2.8. Funcionality replaced by bridgePort configuration of sheBridgePortIpoaProviderRouterIpAddress. |
| U32 sheVlanPPPoEProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.11 | Unsigned32 | read-only | Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a PPPoE or DHCP provider vlan (sheDhcpVlanId). |
| INT sheVlanMgmtVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.12 | INTEGER | read-only | Specify the VLAN that doesnt allows for subscriber ports to be joined. |
| T/F sheVlanServiceTagOnly | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.13 | TruthValue | read-only | A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6. |
| U32 sheVlanAgeingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.14 | Unsigned32 | read-only | MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'. |
| SHE sheVlanRoutingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.15 | SheBridgeRoutingModeType | read-only | Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false). |
| T/F sheVlanTunnelingL2Protocol | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.16 | TruthValue | read-only | If L2VPN is supported, all L2 protocol packets should be set as flood or drop. The value of this attribute is true, all L2 protocol packets is flooded to customers networks. (Default: false). Note: This configuration is not longer supported with SHE R2.8. |
| SHE sheVlanServiceType | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.17 | SheVlanServiceType | read-only | Define a tagging/stripping method in NE DT mode. 1 - It is a DoubleTagging mode for a VLAN. It strips both C-tag and S-tag in DSLAM. 2 - It is a VlanStacking mode for a VLAN. It strips an S-tag in DSLAM. |
| T/F sheVlanDlfFlood | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.18 | TruthValue | read-only | If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false) |
| PHY sheVlanDlfFloodCard | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.19 | PhysicalIndex | read-only | The entPhysicalIndex of the line card where to flood DLF packets from uplink |
| T/F sheVlanCCMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.21 | TruthValue | read-only | This parameter describes the handling of broadcast (bc), unknown multicast (umc) and unknown unicast (uuc) traffic for this vlan. If cross connect mode is True all these packets are flooded in the VLAN otherwise they are droped. Supported by R2.5.1 and higher. |
| SHE sheVlanRouted | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.22 | SheVlanRoutedType | read-only | Configure the handling of ARP request's in the NE for this vlan. Valid values: switching - A ARP request from Network side will be answered with CPE mac address. routing - A ARP request from Network side will be answered with DSLAM mac address. Supported by R2.5.1 and higher. |
| T/F sheVlanMcastFlood | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.23 | TruthValue | read-only | If it is enabled, all mcast packets should be flooded in this vlan. |
| T/F sheVlanMatEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.24 | TruthValue | read-only | Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan. |
| OCT sheVlanSubportServiceName | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.26 | OCTET STRING | read-only | The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID. New parameter with SHE R2.8. |
| I32 sheVlanUplinkTranslationVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.27 | Integer32 | read-only | This parameter enable a bidirectional vlanTranslation on Uplink side. The Vlan, identified by sheVlanIndex of this table-entry (subscriber side) will be translated to the vlan configured with this parameter. 0 - disabled -> is the default value and will disable the vlan translation. 65535 - usedAsTranslationVlan -> this vlan is already in use as an Translation-Vlan and could not be translated This configuration will only be valid for protocolframes, which are routed via hostprocessor. SharedVlanLearning has to be enabled (bridgeBase parameter)! For translation of usertraffic, additional rules has to be configured! |
| sheVlanControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2 | |||
| SHE sheVlanControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.1 | SheBridgeControlRequestType | read-write | createVlan: sheVlanControlIndex sheVlanControlName sheVlanControlEgressPorts sheVlanControlUntaggedPorts sheVlanControlMulticastPermision (obsolete) sheVlanControlDhcpProviderIndex sheVlanControlPPPoEProviderIndex deleteVlan: sheVlanControlIndex setVlanName: sheVlanControlIndex sheVlanControlName setVlanPorts: - change complete Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts setVlanMulticastPermission (will not longer supported with R2.6) sheVlanControlIndex sheVlanControlMulticastPermission setVlanDhcpProviderIndex: sheVlanControlIndex sheVlanControlDhcpProviderIndex setVlanDefaultGateway: sheVlanControlIndex sheVlanControlDefaultGateway setVlanPppoeProviderIndex: sheVlanControlIndex sheVlanControlPPPoEProviderIndex setVlanMgmtVlan: sheVlanControlIndex sheVlanControlMgmtVlan setVlanServiceTagOnly:(not longer supported with R2.6) sheVlanControlIndex sheVlanControlServiceTagOnly setVlanAgeingTime: sheVlanControlIndex sheVlanControlAgeingTime setVlanRoutingMode: sheVlanControlIndex sheVlanControlRoutingMode setVlanTunnelingL2Protocol: sheVlanControlIndex sheVlanControlTunnelingL2Protocol setVlanServiceType: sheVlanControlIndex sheVlanControlServiceType addVlanPorts: - add Ports to Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts deleteVlanPorts: - delete Ports from Portlist sheVlanControlIndex sheVlanControlEgressPorts setVlanDlfFlood: sheVlanControlIndex sheVlanControlDlfFlood sheVlanControlDlfFloodCard setVlanCCMode(230), sheVlanControlIndex sheVlanControlCCMode setVlanRouted(231), sheVlanControlIndex sheVlanControlRouted setVlanMcastFlood(232), sheVlanControlIndex sheVlanControlMcastFlood setVlanMatEnable(233), sheVlanControlIndex sheVlanControlMatEnable setVlanTranslation(235) sheVlanControlIndex sheVlanControlUplinkTranslationVlan modifySubportServiceName (242) sheVlanControlIndex sheVlanControlSubportServiceName |
| I32 sheVlanControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.2 | Integer32 | read-write | Index of the table entry to be configured. |
| SHE sheVlanControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheVlanControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheVlanControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheVlanControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheVlanControlName | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.7 | OCTET STRING | read-write | A descriptional name for that vlan. Spaces and other special characters (: ?) are not allowed!! |
| OCT sheVlanControlEgressPorts | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.8 | OCTET STRING | read-write | Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet. |
| OCT sheVlanControlUnTaggedPorts | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.9 | OCTET STRING | read-write | Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet. |
| SHE sheVlanControlMulticastPermission | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.10 | ShePermissionType | read-write | Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic. |
| U32 sheVlanControlDhcpProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.11 | Unsigned32 | read-write | Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated. |
| OCT sheVlanControlDefaultGateway | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.12 | OCTET STRING | read-write | Look at table. |
| U32 sheVlanControlPPPoEProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.13 | Unsigned32 | read-write | Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated. |
| INT sheVlanControlMgmtVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.14 | INTEGER | read-write | Specify the VLAN that doesn't allow subscribers to join. |
| T/F sheVlanControlServiceTagOnly | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.15 | TruthValue | read-write | A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6. |
| U32 sheVlanControlAgeingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.16 | Unsigned32 | read-write | MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'. |
| SHE sheVlanControlRoutingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.17 | SheBridgeRoutingModeType | read-write | Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false). |
| T/F sheVlanControlTunnelingL2Protocol | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.18 | TruthValue | read-write | look at table. |
| SHE sheVlanControlServiceType | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.19 | SheVlanServiceType | read-write | Set a tagging/stripping method in NE DT mode. |
| T/F sheVlanControlDlfFlood | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.20 | TruthValue | read-write | If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false) |
| PHY sheVlanControlDlfFloodCard | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.21 | PhysicalIndex | read-write | The entPhysicalIndex of the line card where to flood DLF packets from uplink |
| T/F sheVlanControlCCMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.22 | TruthValue | read-write | look at table |
| SHE sheVlanControlRouted | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.23 | SheVlanRoutedType | read-write | look at table |
| T/F sheVlanControlMcastFlood | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.24 | TruthValue | read-write | If it is enabled, all mcast packets should be flooded in this vlan. |
| T/F sheVlanControlMatEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.25 | TruthValue | read-write | Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan. |
| OCT sheVlanControlSubportServiceName | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.27 | OCTET STRING | read-write | The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID. |
| I32 sheVlanControlUplinkTranslationVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.28 | Integer32 | read-write | look at table |
| sheVlanNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3 | |||
| NTF sheVlanCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.1 | A new vlan was created. | ||
| NTF sheVlanModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.2 | A vlan was modified. | ||
| NTF sheVlanDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.3 | A vlan was deleted. | ||
| NTF sheVlanPortsModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.4 | A vlan portlist was modified by command setVlanPorts. | ||
| NTF sheVlanMgmtVlanChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.5 | A vlan is assigned as Mgmt-Vlan. | ||
| NTF sheVlanServiceTagOnlyChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.6 | A customer tagging policy for a VLAN has been changed. | ||
| NTF sheVlanAgeingTimeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.7 | MAC ageing time for a VLAN has been changed. | ||
| NTF sheVlanRoutingModeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.8 | Local switching for a VLAN has been changed. | ||
| NTF sheVlanTunnelingL2ProtocolChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.9 | L2 protocol for a VLAN has been changed. | ||
| NTF sheVlanServiceTypeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.10 | Vlan service type for a VLAN has been changed. | ||
| NTF sheVlanDlfFloodChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.11 | A policy for handling Dlf packets has been changed. | ||
| NTF sheVlanPortslistModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.12 | Configuration trap after changing the current vlan portlist's by using the commands addVlanPorts or deleteVlanPorts. | ||
| NTF sheVlanCCModeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.13 | configuration trap | ||
| NTF sheVlanRoutedChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.14 | configuration trap | ||
| NTF sheVlanMcastFloodChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.15 | configuration trap | ||
| NTF sheVlanMatEnableChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.16 | MAC address translation feature on Vlan base changed. | ||
| NTF sheVlanSubportServiceNameModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.18 | configuration trap | ||
| NTF sheVlanUplinkTranslationChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.19 | Configuration modified. | ||
| sheVlanConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100 | |||
| sheVlanCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.1 | |||
| sheVlanCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.1.1 | Description. | ||
| sheVlanGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2 | |||
| sheVlanGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.1 | Description. | ||
| sheVlanControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.2 | Description. | ||
| sheVlanNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.3 | Description. | ||
| sheRulesAndMetering | 1.3.6.1.4.1.231.7.1.2.2.1.4.3 | |||
| sheRuleTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1 | not-accessible | The she rule table. | |
| sheRuleEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1 | not-accessible | Define pattern, matches and action's for Rule Controls. | |
| U32 sheRuleIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.1 | Unsigned32 | read-only | A userflow-identifier. |
| SHE sheRuleType | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.2 | SheRuleType | read-only | This type defines the set of used pattern and actions for a rule of type. Inside one rule all used match-values have to be exact or exclude. Ignore is don't care. globalSrcMacDeny(1) Type = 1 Name = SourceMacPattern = SourceMacMatch = exact Action = Deny portFlowControl(2) Type = 2 Name = BridgePortPattern = BridgePortMatch = exact SourceMacPattern = SourceMacMatch = exact Action = Allow meteringBridgePort(3) Type = 3 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = Meter ActionParameter01 = Profile qosVlan(4) Type = 4 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosDscp(5) Type = 5 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosBridgePort(6) Type = 6 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority providerDoubleTagVlan01(7) Type = 7 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagPriority01(8) type = 8 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagDscp01(9) type = 9 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId providerDoubleTagVlan02(10) Type = 10 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagPriority02(11) type = 11 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagDscp(12) type = 12 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority mirrorBridgePort(13) Type = 13 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = mirror qosDscp02(14) type = 14 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority portFlowControl02(15) Type = 15 Name = Priority = DscpPattern = DscpMatch = exact BridgePortPattern = BridgePortMatch = exact Action = deny providerSingleTagVlan01(16) sheRuleControlType= 16 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new VlanId providerSingleTagVlan02(17) sheRuleControlType= 17 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlanTag sheRuleControlActionParameter01 = newVlanId sheRuleControlActionParameter02 = new Priority portFlowControl03(18) sheRuleControlType= 18 sheRuleControlName = portEtherTypVlan sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlBridgePortPattern = yy sheRuleControlBridgePortMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new PVID cosTranslation(19) sheRuleControlType= 19 sheRuleControlName = cosTranslation sheRuleControlPriority = sheRuleControlPriorityPattern = xx sheRuleControlPriorityMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty etherTypTranslation(20) sheRuleControlType= 20 sheRuleControlName = etherTypTranslation sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty vlanTranslation(21) sheRuleControlType= 21 sheRuleControlName = vlanTranslation sheRuleControlPriority = sheRuleControlVlanIdPattern = xx sheRuleControlVlanIdMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty dscpTranslation(22) sheRuleControlType= 22 sheRuleControlName = dscpTranslation sheRuleControlPriority = sheRuleControlDscpPattern = xx sheRuleControlDscpMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty New with SHE R2.7: meteringDot1P(25) Type = 25 Name = Priority = BridgePortPattern = BridgePortMatch = exact PriorityPattern = PriorityMatch = exact Action = Meter ActionParameter01 = MeterProfile New with SHE R2.8: meteringVlan(26) (currently support only by WIN/CNX IU) Type = 26 Name = Priority = VlanIdPattern = VlanIdMatch = exact IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnIU(27) (currently support only by WIN/CNX IU's) Type = 27 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnPort(28) (currently support only by CG IU's) Type = 28 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnIU(29) (currently support only by WIN/CNX IU's) Type = 29 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnPort(30) (currently support only by CG IU's) Type = 30 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnIU(31) (currently support only by WIN/CNX IU's) Type = 31 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnPort(32) (currently support only by CG IU's) Type = 32 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDslPort(33) (currently support only by CG IU's) Type = 33 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile ######## genericRule(50) sheRuleControlType= 50 In case of using the genericRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! genericAdminRule(51) sheRuleControlType= 51 In case of using the genericAdminRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! The only difference to rule-type 50, genericRule, is, that the AdminRule will complete handled by CXU-Software, without support of switching fabric!! |
| OCT sheRuleName | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.3 | OCTET STRING | read-only | A descriptional userflow-name. The name should be unique. Spaces and other special characters (: ?) are not allowed!! |
| I32 sheRulePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.4 | Integer32 | read-only | The priority of the rule. Usefull in case of multiple matches. |
| I32 sheRuleBridgePortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.5 | Integer32 | read-only | A sheBridgePortIndex. |
| SHE sheRuleBridgePortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.6 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleSourceMacPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.7 | OCTET STRING | read-only | A single source mac-address. |
| SHE sheRuleSourceMacMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.8 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleSourceMacStartPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.9 | OCTET STRING | read-only | A source mac-address to define the start point of a address range. |
| OCT sheRuleSourceMacStopPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.10 | OCTET STRING | read-only | A source mac-address to define the end point of a address range. |
| SHE sheRuleSourceMacRangeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.11 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleDestinationMacPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.12 | OCTET STRING | read-only | A single destination mac-address. |
| SHE sheRuleDestinationMacMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.13 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleDestinationMacStartPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.14 | OCTET STRING | read-only | A destination mac-address to define the start point of a address range. |
| OCT sheRuleDestinationMacStopPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.15 | OCTET STRING | read-only | A destination mac-address to define the end point of a address range. |
| SHE sheRuleDestinationMacRangeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.16 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleVlanIdPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.17 | Integer32 | read-only | A sheVlanIndex. |
| SHE sheRuleVlanIdMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.18 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| INT sheRulePriorityPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.19 | INTEGER | read-only | A .1p priority value. Range is 0-7. |
| SHE sheRulePriorityMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.20 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| INT sheRuleTosPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.21 | INTEGER | read-only | A tos value. Range is 0..255. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence. |
| SHE sheRuleTosMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.22 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| INT sheRuleDscpPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.23 | INTEGER | read-only | A dscp value. Range is 0-63. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence. |
| SHE sheRuleDscpMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.24 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleEtherTypePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.25 | OCTET STRING | read-only | A ethertype pattern match. |
| SHE sheRuleEtherTypeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.26 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleSourceIpAddressPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.27 | OCTET STRING | read-only | A single source ip-address. |
| SHE sheRuleSourceIpAddressMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.28 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleSourceIpSubnetMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.29 | OCTET STRING | read-only | A source ip-address subnet mask. |
| SHE sheRuleSourceIpSubnetMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.30 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleDestinationIpAddressPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.31 | OCTET STRING | read-only | A single destination ip-address. |
| SHE sheRuleDestinationIpAddressMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.32 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleDestinationIpSubnetMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.33 | OCTET STRING | read-only | A destination ip-address subnet mask. |
| SHE sheRuleDestinationIpSubnetMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.34 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleSourcePortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.35 | Integer32 | read-only | TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given. |
| SHE sheRuleSourcePortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.36 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleDestinationPortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.37 | Integer32 | read-only | TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given. |
| SHE sheRuleDestinationPortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.38 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| SHE sheRuleAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.39 | SheRuleActionType | read-only | Gives the action for the defined userflow. deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12) mirror(13), |
| I32 sheRuleActionParameter01 | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.40 | Integer32 | read-only | Define an additional parameter depence on the used action. deny,allow,mirror: not used changeTos: new Tos value changeDscp: new Dscp value changeInnerVlan: new Vlan Id changeOuterVlan: new Vlan Id meter: meterProfileIndex changeInnerPriority: new Priority (1p) changeOuterPriority: new Priority (1p) assignTC: Traffic class values 0-7 changeInnerVlanTag: new Vlan Id changeOuterVlanTag: new Vlan Id |
| I32 sheRuleActionParameter02 | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.41 | Integer32 | read-only | Define an additional parameter depence on the used action. deny,allow,mirror,changeTos, changeDscp, changeInnerVlan, changeOuterVlan, meter, changeInnerPriority, changeOuterPriority, assignTC, mirror: not used changeInnerVlanTag: new Priority (1p) changeOuterVlanTag: new Priority (1p) |
| SHE sheRuleFlowPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.42 | SheRuleFlowType | read-only | The flow-direction for which this rule should work. 1 - upstream 2 - downstream 3 - bidirectional |
| SHE sheRuleFlowMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.43 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| U32 sheRuleIpProtocolPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.44 | Unsigned32 | read-only | Used L4-ProtocolType. Needed to evaluate the correct Ip-PortPattern (look at RFC791). |
| SHE sheRuleIpProtocolMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.45 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| U32 sheRuleIpPrecedencePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.46 | Unsigned32 | read-only | A Ip precedence value 0-7. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence. |
| SHE sheRuleIpPrecedenceMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.47 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleSourceMacMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.48 | OCTET STRING | read-only | Bit mask for sheRuleSourceMacPattern. Will be evaluated by NE only if sheRuleSourceMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present. |
| SHE sheRuleSourceMacMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.49 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| OCT sheRuleDestinationMacMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.50 | OCTET STRING | read-only | Bit mask for sheRuleDestinationMacPattern. Will be evaluated by NE only if sheRuleDestinationMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present. |
| SHE sheRuleDestinationMacMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.51 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleMessageTypePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.52 | Integer32 | read-only | Message Type. Currently used only if IP Protocol pattern is set to ICMP (RFC950). Otherwise ignored. |
| SHE sheRuleMessageTypeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.53 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleMessageCodePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.54 | Integer32 | read-only | CodeType. Currently used only if IP Protocol pattern is set to ICMP and a MessageType Pattern is given (RFC950). Otherwise ignored. |
| SHE sheRuleMessageCodeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.55 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| SHE sheRuleGenericMatchAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.56 | SheRuleGenericActionType | read-only | Handle packet as follows if rule match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleGenericMatchActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame |
| SHE sheRuleGenericNoMatchAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57 | SheRuleGenericActionType | read-only | Handle packet as follows if rule not match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericNoMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericNoMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericNoMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericNoMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericNoMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericNoMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleGenericNoMatchActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame |
| U32 sheRuleGenericMatchActionParameterMeterIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.58 | Unsigned32 | read-only | Metering Profile Index used by genericrule action: meter(2) |
| U32 sheRuleGenericMatchActionParameterRedirPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.59 | Unsigned32 | read-only | BridgePort Index used by rule action: redirect(3) |
| U32 sheRuleGenericMatchActionParameterDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.60 | Unsigned32 | read-only | DSCP value used by rule action: setDscp(5) |
| U32 sheRuleGenericMatchActionParameterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.61 | Unsigned32 | read-only | Priority value used by rule action: setPriority(6) |
| U32 sheRuleGenericMatchActionParameterTagPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.62 | Unsigned32 | read-only | Priority value used by rule action: changeTagPriority(7) |
| U32 sheRuleGenericMatchActionParameterIpPrecedence | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.63 | Unsigned32 | read-only | IP Precedence value used by rule action: setIpPrecedence(9) |
| U32 sheRuleGenericMatchActionParameterRate | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.64 | Unsigned32 | read-only | Rate limit value (MBit per second) used by rule action: rateLimit(11) |
| U32 sheRuleGenericMatchActionParameterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.65 | Unsigned32 | read-only | Vlan ID used by rule action: changeVlanId(12) |
| U32 sheRuleGenericNoMatchActionParameterMeterIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.66 | Unsigned32 | read-only | Metering Profile Index used by rule action: --- |
| U32 sheRuleGenericNoMatchActionParameterRedirPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.67 | Unsigned32 | read-only | BridgePort Index used by rule action: redirect(3) |
| U32 sheRuleGenericNoMatchActionParameterDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.68 | Unsigned32 | read-only | DSCP value used by rule action: setDscp(5) |
| U32 sheRuleGenericNoMatchActionParameterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.69 | Unsigned32 | read-only | Priority value used by rule action: setPriority(6) |
| U32 sheRuleGenericNoMatchActionParameterTagPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.70 | Unsigned32 | read-only | Priority value used by rule action: changeTagPriority(7) |
| U32 sheRuleGenericNoMatchActionParameterIpPrecedence | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.71 | Unsigned32 | read-only | IP Precedence value used by rule action: setIpPrecedence(9) |
| U32 sheRuleGenericNoMatchActionParameterRate | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.72 | Unsigned32 | read-only | Rate limit value (MBit per second) used by rule action: rateLimit(11) |
| U32 sheRuleGenericNoMatchActionParameterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.73 | Unsigned32 | read-only | Vlan ID used by rule action: changeVlanId(12) |
| I32 sheRuleMatchCounter | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.74 | Integer32 | read-only | Number of matches (how often the rule has been matched). Note: Not all rules types support counters. The NE responds the value -1 if there is no counter available. |
| SHE sheRuleActivationState | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.75 | SheRuleActivationStateType | read-only | Show the activation state of a rule. A change of this value will not be notified by trap. |
| I32 sheRuleInnerVlanIdPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.76 | Integer32 | read-only | Match the inner vlanid under double-tag mode. |
| SHE sheRuleInnerVlanIdMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.77 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| I32 sheRuleInnerPriorityPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.78 | Integer32 | read-only | Match the inner .1p priority under double-tag mode. |
| SHE sheRuleInnerPriorityMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.79 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| PHY sheRuleIUPhysIndexPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.82 | PhysicalIndex | read-only | Match the IU entPhysIndex from entPhysicalTable. |
| SHE sheRuleIUPhysIndexMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.83 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| NUM sheRulePortIfIndexPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.84 | InterfaceIndex | read-only | Match the DSL port ifIndex from ifTable. |
| SHE sheRulePortIfIndexMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.85 | SheRuleMatchType | read-only | Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) |
| sheRuleControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2 | |||
| SHE sheRuleControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.1 | SheBridgeControlRequestType | read-write | createRule: sheRuleControlName ... minimum of one pair of pattern-match-combination with a match-value unequal to ignore ... sheRuleControlAction sheRuleControlActionParameter01 ... deleteRule: sheRuleControlIndex clearRuleMatchCounter: sheRuleControlIndex |
| U32 sheRuleControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.2 | Unsigned32 | read-write | The index of the deleted rule. |
| SHE sheRuleControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheRuleControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheRuleControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheRuleControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheRuleControlType | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.7 | SheRuleType | read-write | This type defines the set of used pattern and actions for this rule: look at rule-table. |
| OCT sheRuleControlName | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.8 | OCTET STRING | read-write | A descriptional userflow-name. The name should be unique, but there is a exception: In case of using a expand-Ruletype, the name of the expanding rule must be equal to the original rule, which should be expanded. Spaces and other special characters (: ?) are not allowed!! |
| I32 sheRuleControlPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.9 | Integer32 | read-write | The priority of the rule. Usefull in case of multiple matches. |
| I32 sheRuleControlBridgePortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.10 | Integer32 | read-write | look at rule table... |
| SHE sheRuleControlBridgePortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.11 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlSourceMacPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.12 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlSourceMacMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.13 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlSourceMacStartPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.14 | OCTET STRING | read-write | look at rule table... |
| OCT sheRuleControlSourceMacStopPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.15 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlSourceMacRangeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.16 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlDestinationMacPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.17 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlDestinationMacMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.18 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlDestinationMacStartPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.19 | OCTET STRING | read-write | look at rule table... |
| OCT sheRuleControlDestinationMacStopPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.20 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlDestinationMacRangeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.21 | SheRuleMatchType | read-write | look at rule table... |
| I32 sheRuleControlVlanIdPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.22 | Integer32 | read-write | look at rule table... |
| SHE sheRuleControlVlanIdMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.23 | SheRuleMatchType | read-write | look at rule table... |
| INT sheRuleControlPriorityPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.24 | INTEGER | read-write | look at rule table... |
| SHE sheRuleControlPriorityMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.25 | SheRuleMatchType | read-write | look at rule table... |
| INT sheRuleControlTosPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.26 | INTEGER | read-write | look at rule table... |
| SHE sheRuleControlTosMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.27 | SheRuleMatchType | read-write | look at rule table... |
| INT sheRuleControlDscpPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.28 | INTEGER | read-write | look at rule table... |
| SHE sheRuleControlDscpMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.29 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlEtherTypePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.30 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlEtherTypeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.31 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlSourceIpAddressPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.32 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlSourceIpAddressMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.33 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlSourceIpSubnetMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.34 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlSourceIpSubnetMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.35 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlDestinationIpAddressPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.36 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlDestinationIpAddressMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.37 | SheRuleMatchType | read-write | look at rule table... |
| OCT sheRuleControlDestinationIpSubnetMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.38 | OCTET STRING | read-write | look at rule table... |
| SHE sheRuleControlDestinationIpSubnetMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.39 | SheRuleMatchType | read-write | look at rule table... |
| I32 sheRuleControlSourcePortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.40 | Integer32 | read-write | look at rule table... |
| SHE sheRuleControlSourcePortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.41 | SheRuleMatchType | read-write | look at rule table... |
| I32 sheRuleControlDestinationPortPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.42 | Integer32 | read-write | look at rule table... |
| SHE sheRuleControlDestinationPortMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.43 | SheRuleMatchType | read-write | look at rule table... |
| SHE sheRuleControlAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.44 | SheRuleActionType | read-write | look at rule table... |
| I32 sheRuleControlActionParameter01 | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.45 | Integer32 | read-write | look at rule table... |
| I32 sheRuleControlActionParameter02 | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.46 | Integer32 | read-write | look at rule table... |
| SHE sheRuleControlFlowPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.47 | SheRuleFlowType | read-write | look at rule table... |
| SHE sheRuleControlFlowMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.48 | SheRuleMatchType | read-write | look at rule table... |
| U32 sheRuleControlIpProtocolPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.49 | Unsigned32 | read-write | look at table |
| SHE sheRuleControlIpProtocolMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.50 | SheRuleMatchType | read-write | look at table |
| U32 sheRuleControlIpPrecedencePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.51 | Unsigned32 | read-write | look at table |
| SHE sheRuleControlIpPrecedenceMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.52 | SheRuleMatchType | read-write | look at table |
| OCT sheRuleControlSourceMacMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.53 | OCTET STRING | read-write | look at table |
| SHE sheRuleControlSourceMacMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.54 | SheRuleMatchType | read-write | look at table |
| OCT sheRuleControlDestinationMacMaskPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.55 | OCTET STRING | read-write | look at table |
| SHE sheRuleControlDestinationMacMaskMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.56 | SheRuleMatchType | read-write | look at table |
| I32 sheRuleControlMessageTypePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.57 | Integer32 | read-write | look at table |
| SHE sheRuleControlMessageTypeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.58 | SheRuleMatchType | read-write | look at table |
| I32 sheRuleControlMessageCodePattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.59 | Integer32 | read-write | look at table |
| SHE sheRuleControlMessageCodeMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.60 | SheRuleMatchType | read-write | look at table |
| SHE sheRuleControlGenericMatchAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.61 | SheRuleGenericActionType | read-write | look at rule table... |
| SHE sheRuleControlGenericNoMatchAction | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.62 | SheRuleGenericActionType | read-write | look at rule table... |
| U32 sheRuleControlGenericMatchActionParameterMeterIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.63 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterRedirPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.64 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.65 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.66 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterTagPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.67 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterIpPrecedence | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.68 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterRate | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.69 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericMatchActionParameterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.70 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterMeterIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.71 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterRedirPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.72 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterDscp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.73 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.74 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterTagPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.75 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterIpPrecedence | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.76 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterRate | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.77 | Unsigned32 | read-write | look at table |
| U32 sheRuleControlGenericNoMatchActionParameterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.78 | Unsigned32 | read-write | look at table |
| I32 sheRuleControlInnerVlanIdPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.79 | Integer32 | read-write | Match the inner vlanid under double-tag mode. |
| SHE sheRuleControlInnerVlanIdMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.80 | SheRuleMatchType | read-write | look at table |
| I32 sheRuleControlInnerPriorityPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.81 | Integer32 | read-write | look at table |
| SHE sheRuleControlInnerPriorityMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.82 | SheRuleMatchType | read-write | look at table |
| PHY sheRuleControlIUPhysIndexPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.85 | PhysicalIndex | read-write | look at rule table... |
| SHE sheRuleControlIUPhysIndexMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.86 | SheRuleMatchType | read-write | look at rule table... |
| NUM sheRuleControlPortIfIndexPattern | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.87 | InterfaceIndex | read-write | look at rule table... |
| SHE sheRuleControlPortIfIndexMatch | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.88 | SheRuleMatchType | read-write | look at rule table... |
| sheRuleNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3 | |||
| NTF sheRuleCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.1 | Configuration notification. | ||
| NTF sheRuleDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.2 | Configuration notification. | ||
| NTF sheRuleModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.3 | Configuration notification. | ||
| sheMeterProfileTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4 | not-accessible | The meter profile table. | |
| sheMeterProfileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1 | not-accessible | One entry for each metering profile. Selection of the used profile will be done via rule-configuration. Note: DS policing will currently not supported by the NE (information stand R2.8)! | |
| U32 sheMeterProfileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.1 | Unsigned32 | read-only | A profile-table index. |
| OCT sheMeterProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.2 | OCTET STRING | read-only | A descriptional name for this metering profile. Spaces and other special characters (: ?) are not allowed!! |
| I32 sheMeterProfileCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.3 | Integer32 | read-only | The Committed Information Rate for upstream policing. ATTENTION: CIR smaller or equal PIR |
| I32 sheMeterProfileCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.4 | Integer32 | read-only | The Committed Burst Size for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS) |
| I32 sheMeterProfilePir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.5 | Integer32 | read-only | The peak information rate for upstream policing. ATTENTION: CIR smaller or equal PIR |
| I32 sheMeterProfilePbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.6 | Integer32 | read-only | The peak burst size (or maximum burst size MBS) for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS) |
| I32 sheMeterProfileDsCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.7 | Integer32 | read-only | The Committed Information Rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR |
| I32 sheMeterProfileDsCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.8 | Integer32 | read-only | The Committed Burst Size for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS) |
| I32 sheMeterProfileDsPir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.9 | Integer32 | read-only | The peak information rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR |
| I32 sheMeterProfileDsPbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.10 | Integer32 | read-only | The peak burst size (or maximum burst size MBS) for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS) |
| SHE sheMeterProfileUseParameters | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.13 | SheMeterProfileUseParametersType | read-only | This defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used. - policingUS(0) - policingDS(1) Note: DS policing will currently not supported by the NE (information stand R2.8)! |
| sheMeterControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5 | |||
| SHE sheMeterControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.1 | SheBridgeControlRequestType | read-write | createMeterProfile: sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters deleteMeterProfile: sheMeterControlIndex modifyMeterProfile: sheMeterControlIndex sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters |
| U32 sheMeterControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.2 | Unsigned32 | read-write | Index of the configured table entry. Needed for modify or delete. |
| SHE sheMeterControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheMeterControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheMeterControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheMeterControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheMeterControlProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.7 | OCTET STRING | read-write | look at meterProfileTable... Spaces and other special characters (: ?) are not allowed!! |
| I32 sheMeterControlProfileCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.8 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfileCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.9 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfilePir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.10 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfilePbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.11 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfileDsCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.12 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfileDsCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.13 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfileDsPir | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.14 | Integer32 | read-write | look at meterProfileTable... |
| I32 sheMeterControlProfileDsPbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.15 | Integer32 | read-write | look at meterProfileTable... |
| SHE sheMeterControlProfileUseParameters | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.18 | SheMeterProfileUseParametersType | read-write | look at table |
| sheMeteringNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6 | |||
| NTF sheMeteringProfileCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.1 | Configuration notification. | ||
| NTF sheMeteringProfileModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.2 | Configuration notification. | ||
| NTF sheMeteringProfileDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.3 | Configuration notification. | ||
| sheRuleAndMeteringConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100 | |||
| sheUserFlowAndMeteringCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.1 | |||
| sheUserFlowAndMeteringCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.1.1 | Description. | ||
| sheUserFlowAndMeteringGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2 | |||
| sheRuleGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.1 | Description. | ||
| sheMeteringGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.2 | Description. | ||
| sheRuleControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.3 | Description. | ||
| sheMeteringControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.4 | Description. | ||
| sheRuleAndMeteringNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.5 | Description. | ||
| sheFdb | 1.3.6.1.4.1.231.7.1.2.2.1.4.4 | |||
| sheFdbBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1 | |||
| U32 sheFdbBaseAgeingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.1 | Unsigned32 | read-only | The general ageing time for learned Mac-addresses. |
| T/F sheFdbBaseLearningUplink | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.2 | TruthValue | read-only | The global value that indicates whether to use a mac learning function for uplink. |
| sheFdbTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2 | not-accessible | The forwarding data base table. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the vlanIndex, which is the first table index here. If a valid vlanIndex value was used, only the tableEntries with this vlanIndex as first key will be refreshed. If the vlanIndex is 0 or unknown the full table will be refreshed. | |
| sheFdbEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1 | not-accessible | One entry per learned mac-address per vlan. First key is the VlanIndex. | |
| U32 sheFdbIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.1 | Unsigned32 | read-only | Second key for fdb-table. Number of valid entrys is equal to number of current learned Mac-Addresses for vlan indeced by key 1. |
| OCT sheFdbMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.2 | OCTET STRING | read-only | The learned mac-address. |
| INT sheFdbPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.3 | INTEGER | read-only | That is the sheBridgePortIndex of the destination port. |
| U32 sheFdbAge | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.4 | Unsigned32 | read-only | Time this mac-address was learned. |
| SHE sheFdbStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.5 | SheFdbStatusType | read-only | The status of this entry. The meanings of the values are: other(1) : none of the following. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value was learned, and is being used. self(4) : the value of the corresponding instance of FdbAclAddress represents one of the bridge's addresses. mgmt(5) : static(6) : the value was not learned but fixed configured by operator |
| SHE sheFdbCpuPermit | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.6 | ShePermissionType | read-only | Frames have the permission to be send to control plane. |
| SHE sheFdbPortPermit | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.7 | ShePermissionType | read-only | Frames have the permission to be send to data plane. |
| sheFdbControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3 | |||
| SHE sheFdbControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.1 | SheBridgeControlRequestType | read-write | setFdbBaseAgeingTime (401): sheFdbControlBaseAgeingTime setFdbBaseLearningUplink (402): sheFdbControlBaseLearningUplink New with R2.8 maintenance: refreshFdbTable (403): sheFdbControlIndex -> define the vlan for which the Fdb should be updated, Only supported by hiX5608 R1.3!! createFdbStaticEntry(404): sheFdbControlIndex -> define the vlan for which the FdbEntry should be created sheFdbControlPort -> define the bridgePort-Index for which the FdbEntry should be created sheFdbControlMacAddress -> define the used MacAddress |
| I32 sheFdbControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.2 | Integer32 | read-write | Value depends on the used ControlRequest. |
| SHE sheFdbControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.3 | SheControlStatusType | read-only | The status of a user command. . |
| G32 sheFdbControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheFdbControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheFdbControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheFdbControlBaseAgeingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.7 | Unsigned32 | read-write | The values to be configured. |
| T/F sheFdbControlBaseLearningUplink | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.8 | TruthValue | read-write | The values to be configured. True : enable mac learning for uplink False : disable mac learning for uplink |
| I32 sheFdbControlPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.9 | Integer32 | read-write | Define the bridgePort-Index for which the FdbEntry should be created/deleted. Value depends on the used ControlRequest. 0 used as wildcard for 'ALL' NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!! |
| OCT sheFdbControlMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.10 | OCTET STRING | read-write | Define the MacAddress for configuration or delete. Value depends on the used ControlRequest. NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!! |
| sheFdbNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4 | |||
| NTF sheFdbBaseAgeingTimeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.1 | Configuration Notification | ||
| NTF sheFdbBaseLearningUplinkChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.2 | Configuration Notification | ||
| NTF sheFdbTableUpdated | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.3 | FDB table update finished. | ||
| NTF sheFdbStaticMacCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.4 | static FDB table entry created | ||
| sheFdbConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100 | |||
| sheFdbCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.1 | |||
| sheFdbCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.1.1 | Description. | ||
| sheFdbGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2 | |||
| sheFdbBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.1 | Description. | ||
| sheFdbGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.2 | Description. | ||
| sheFdbControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.3 | Description. | ||
| sheFdbNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.4 | Description. | ||
| sheLag | 1.3.6.1.4.1.231.7.1.2.2.1.4.5 | |||
| sheLagGroupTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1 | not-accessible | Contain allways two entrys for possible available Lag-Groups. | |
| sheLagGroupEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1 | not-accessible | One entry for each possible lag-group. | |
| OCT sheLagGroupMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.1 | OCTET STRING | read-only | A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator. |
| U32 sheLagGroupActorSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.2 | Unsigned32 | read-only | A 2-octet value indicating the priority value associated with the Actor's System ID. |
| OCT sheLagGroupActorSystemId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.3 | OCTET STRING | read-only | A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. |
| T/F sheLagGroupAggregateOrIndividual | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.4 | TruthValue | read-only | A read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE'). |
| I32 sheLagGroupActorAdminKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.5 | Integer32 | read-only | The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. The meaning of particular Key values is of local significance. |
| I32 sheLagGroupActorOperKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.6 | Integer32 | read-only | The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance. |
| OCT sheLagGroupPartnerSystemId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.7 | OCTET STRING | read-only | A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System. |
| I32 sheLagGroupPartnerSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.8 | Integer32 | read-only | A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System. |
| I32 sheLagGroupPartnerOperKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.9 | Integer32 | read-only | The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit, read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System. |
| I32 sheLagGroupCollectorMaxDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.10 | Integer32 | read-only | The value of this 16-bit attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1). Note: R2.8 will not longer accept any modification of this parameter and use always NE internal value. |
| T/F sheLagGroupLacpActivity | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.11 | TruthValue | read-only | This attribute will enable or disable LACP-Activity for this Lag-Group. |
| SHE sheLagGroupMethod | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.12 | SheLagMethodType | read-only | Possible values: srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6) |
| OCT sheLagGroupPortList | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.13 | OCTET STRING | read-only | Portlist for all member's of this LAG. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet. |
| PHY sheLagGroupEntPhysicalIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.14 | PhysicalIndex | read-only | This attribute describes the entPhysicalIndex of the card, where this LAG group is placed. Only LagPorts with identical entPhysicalIndex for the card could be added to a group. This information is given via: sheLagGroupPortList -> sheLagPortEntry -> sheBridgePortIndex -> sheSublayerIndex -> ifIndex -> shePhysPortEntPhysicalIndex |
| sheLagPortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2 | not-accessible | A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. For she, this table will contain allways 4 entrys. | |
| sheLagPortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1 | not-accessible | A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. | |
| I32 sheLagPortActorSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.1 | Integer32 | read-only | A 2-octet value used to define the priority value associated with the Actor's System ID. |
| OCT sheLagPortActorSystemId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.2 | OCTET STRING | read-only | A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port. |
| I32 sheLagPortActorAdminKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.3 | Integer32 | read-only | The current administrative value of the Key for the Aggregation Port. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance. |
| I32 sheLagPortActorOperKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.4 | Integer32 | read-only | The current operational value of the Key for the Aggregation Port. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance. |
| I32 sheLagPortPartnerAdminSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.5 | Integer32 | read-only | A 2-octet value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemID, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation. |
| I32 sheLagPortPartnerOperSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.6 | Integer32 | read-only | A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemPriority if there is no protocol Partner. |
| OCT sheLagPortPartnerAdminSystemId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.7 | OCTET STRING | read-only | A 6-octet MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation. |
| OCT sheLagPortPartnerOperSystemId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.8 | OCTET STRING | read-only | A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemID if there is no protocol Partner. |
| I32 sheLagPortPartnerAdminKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.9 | Integer32 | read-only | The current administrative value of the Key for the protocol Partner. This is a 16-bit, read-write value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation. |
| I32 sheLagPortPartnerOperKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.10 | Integer32 | read-only | The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminKey if there is no protocol Partner. This is a 16-bit, read-only value. |
| I32 sheLagPortSelectedAggId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.11 | Integer32 | read-only | The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only. |
| I32 sheLagPortAttachedAggId | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.12 | Integer32 | read-only | The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only. |
| I32 sheLagPortActorPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.13 | Integer32 | read-only | The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only. |
| I32 sheLagPortActorPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.14 | Integer32 | read-only | The priority value assigned to this Aggregation Port. This is a 2-octet value. |
| I32 sheLagPortPartnerAdminPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.15 | Integer32 | read-only | The current administrative value of the port number for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority,PortPartnerAdminSystemID, PartnerAdminKey, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation. |
| I32 sheLagPortPartnerOperPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.16 | Integer32 | read-only | The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only. |
| I32 sheLagPortPartnerAdminPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.17 | Integer32 | read-only | The current administrative value of the port priority for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminKey, and PortPartnerAdminPort, in order to achieve manually configured aggregation. |
| I32 sheLagPortPartnerOperPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.18 | Integer32 | read-only | The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminPortPriority if there is no. |
| SHE sheLagPortActorAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19 | SheLagStateType | read-only | A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit of string corresponds to bit 7 (Expired). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is in the EXPIRED state The second of string bit corresponds to bit 6 (Defaulted). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is using Defaulted operational Partner information, administratively configured for the Partner. The third of string bit corresponds to bit 5 (Distributing). FALSE (encoded as a 0) means distribution of outgoing frames on this link is definitely disabled. The fourth of string bit corresponds to bit 4(Collecting). TRUE (encoded as a 1) means collection of incoming frames on this link is definitely enabled. The fifth of string bit corresponds to bit 3 (Synchronization). If FALSE (encoded as a 0), then this link is currently OUT_OF_SYNC, i.e., it is not in the right Aggregation. The sixth of string bit corresponds to bit 2 (Aggregation). If FALSE (encoded as a 0), the link is considered to be Individual, i.e., this link can be operated only as an individual link. The seventh of string bit corresponds to bit 1 (LACP_Timeout). Short Timeout is encoded as a 1; Long Timeout is encoded as a 0. The eighth of string bit corresponds to bit 0 of Actor_State (LACP_Activity). Active LACP is encoded as a 1; Passive LACP is encoded as a 0. The values of LACP_Activity,LACP_Timeout and Aggregation allow administrative control and could be set by controlgroup. |
| SHE sheLagPortActorOperState | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.20 | SheLagStateType | read-only | A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. |
| SHE sheLagPortPartnerAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.21 | SheLagStateType | read-only | A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The assigned value is used in order to achieve manually configured aggregation. |
| SHE sheLagPortPartnerOperState | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.22 | SheLagStateType | read-only | A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. In the absence of an active protocol Partner, this value may reflect the manually configured value PortPartnerAdminState. This attribute value is read-only. |
| T/F sheLagPortAggregateOrIndividual | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.23 | TruthValue | read-only | A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE'). |
| T/F sheLagPortLacpAvailability | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.24 | TruthValue | read-only | This attribute indicates, if this port is available for lacp or not. |
| sheLagControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3 | |||
| SHE sheLagControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.1 | SheBridgeControlRequestType | read-write | modifyLagGroupEntry: sheLagControlIndex sheLagControlGroupActorSystemPriority sheLagControlGroupActorAdminKey sheLagControlGroupCollectorMaxDelay sheLagControlGroupLacpActivity sheLagControlGroupMethod modifyLagPortEntry: sheLagControlIndex sheLagControlPortActorAdminKey sheLagControlPortActorPortPriority sheLagControlPortActorAdminState sheLagControlPortLacpAvailability assignBridgePortToLag: sheLagControlIndex sheLagControlGroupPortList unassignBridgePortFromLag: sheLagControlIndex sheLagControlGroupPortList |
| I32 sheLagControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.2 | Integer32 | read-write | The index of the table entry to be configured. |
| SHE sheLagControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheLagControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheLagControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheLagControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheLagControlGroupActorSystemPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.7 | Integer32 | read-write | Look at group-table description... |
| I32 sheLagControlGroupActorAdminKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.8 | Integer32 | read-write | Look at group-table description... |
| I32 sheLagControlGroupCollectorMaxDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.9 | Integer32 | read-write | Look at group-table description... Note: R2.8 will not longer use any modification of this parameter and use always NE internal value. A modification will be ignored. |
| OCT sheLagControlGroupPortList | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.10 | OCTET STRING | read-write | Look at group-table description... |
| T/F sheLagControlGroupLacpActivity | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.11 | TruthValue | read-write | Look at group-table description... |
| SHE sheLagControlGroupMethod | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.12 | SheLagMethodType | read-write | Look at group-table description... |
| I32 sheLagControlPortActorAdminKey | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.13 | Integer32 | read-write | Look at port-table description... |
| I32 sheLagControlPortActorPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.14 | Integer32 | read-write | Look at port-table description... |
| SHE sheLagControlPortActorAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.15 | SheLagStateType | read-write | Look at port-table description...Only bit 0, 1 and 2 could be configured. |
| T/F sheLagControlPortLacpAvailability | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.16 | TruthValue | read-write | Look at port-table description... |
| sheLagNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4 | |||
| NTF sheLagGroupEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.1 | Configuration notification. | ||
| NTF sheLagPortEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.2 | Configuration notification. | ||
| NTF sheLagBridgePortAssigned | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.3 | LagGroup-Portlist changed notification. | ||
| NTF sheLagBridgePortUnassigned | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.4 | LagGroup-Portlist changed notification. | ||
| sheLagConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100 | |||
| sheLagCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.1 | |||
| sheLagCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.1.1 | Description. | ||
| sheLagGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2 | |||
| sheLagGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.1 | Description. | ||
| sheLagPortGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.2 | Description. | ||
| sheLagControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.3 | Description. | ||
| sheLagNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.4 | Description. | ||
| sheDhcpRelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.6 | |||
| sheDhcpBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1 | |||
| SHE sheDhcpRelayAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1 | SheDhcpRelayAdminStateType | read-only | Globaly enable/disable of Dhcp/PPPoE agent. Telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded (currently NO support) handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop valid values: up(1), -> releases >= R2.5 run now dhcpPppoeRelayRelay mode down(2), -> releases >= R2.5 run now dhcpPppoeSnoopSnoop mode dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), (currently NO support) dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), (currently NO support) dhcpPppoeBridgeRelay(10),(currently NO support) dhcpPppoeBridgeSnoop(11),(currently NO support) dhcpPppoeBridgeBridge(12)(currently NO support) NOTE: Only release R2.5 and higher can accept new value's 4..12 depending on the state of implementation in NE. |
| OCT sheDhcpRelayRemoteId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.2 | OCTET STRING | read-only | Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. Moved to sheBridgePortTable and sheBridgeBase. (obsolete) |
| T/F sheDhcpUseInnerTagForProtocols | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.3 | TruthValue | read-only | This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all DHCP providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8. |
| T/F shePppoeUseInnerTagForProtocols | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.4 | TruthValue | read-only | This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all PPPoE providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8. |
| T/F sheDhcpStationMoveEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.8 | TruthValue | read-only | This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8. |
| sheDhcpProviderTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2 | not-accessible | The dhcp/pppoe provider table. | |
| sheDhcpProviderEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1 | not-accessible | One entry for each known dhcp or pppoe provider (depends on the option settings). | |
| U32 sheDhcpProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.1 | Unsigned32 | read-only | A table index. |
| OCT sheDhcpProviderName | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.2 | OCTET STRING | read-only | Descriptional name. Spaces and other special characters (: ?) are not allowed!! |
| OCT sheDhcpServerIpAddress1 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.3 | OCTET STRING | read-only | There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!! |
| OCT sheDhcpServerIpAddress2 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.4 | OCTET STRING | read-only | There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!! |
| OCT sheDhcpServerIpAddress3 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.5 | OCTET STRING | read-only | There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!! |
| OCT sheDhcpServerGateway | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.6 | OCTET STRING | read-only | The gateway address of this dhcp provider. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable. |
| I32 sheDhcpVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.7 | Integer32 | read-only | That points to the VLAN, where the request should be send. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId. |
| OCT sheDhcpRelayAgentIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.8 | OCTET STRING | read-only | The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. |
| OCT sheDhcpRelayAgentNetmask | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.9 | OCTET STRING | read-only | The RelayAgent Netmask. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable. |
| SHE sheDhcpRelayAgentOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.10 | SheDhcpRelayAgentOptionType | read-only | Option 82, depends on the Dhcp - Server functionality. If PPPoE is configured also special Options could be implemented. With R2.7 additional options for LineProperty are possible (value 12..23). |
| T/F sheDhcpCebsMacTranslation | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.11 | TruthValue | read-only | Configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers. |
| T/F sheDhcpRelayAgentMgmt | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.12 | TruthValue | read-only | Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay. |
| I32 sheDhcpInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.13 | Integer32 | read-only | The index of inner-vlan when to forward Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId. |
| T/F sheDhcpBcastTranslationDs | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.14 | TruthValue | read-only | Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers. |
| OCT sheDhcpLinePropertyNodeIdentifier | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.16 | OCTET STRING | read-only | This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7. |
| OCT sheDhcpServerIpAddress4 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.17 | OCTET STRING | read-only | Now there are four entrys and all of them backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. New with R2.8 maintenance. |
| sheDhcpControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3 | |||
| SHE sheDhcpControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.1 | SheBridgeControlRequestType | read-write | setDhcpAdminState: sheDhcpControlRelayAdminState Depending on the used RelayAgentOption value, not all values are needed. If a PPPoE or simplified option is used, only the values Name and AgentOption are mandatory. createDhcpProviderEntry: sheDhcpControlProfileName sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentOption sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) modifyDhcpProviderEntry: sheDhcpControlIndex sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlRelayAgentOption sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) deleteDhcpProviderEntry: sheDhcpControlIndex New with R2.8: setDhcpTagForProtocol: sheDhcpControlUseInnerTagForProtocols setDhcpStationMove: sheDhcpControlStationMoveEnabled |
| I32 sheDhcpControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.2 | Integer32 | read-write | The table index to be configured. |
| SHE sheDhcpControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheDhcpControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheDhcpControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheDhcpControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheDhcpControlRelayAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.7 | SheDhcpRelayAdminStateType | read-write | Look at base parameter description... |
| OCT sheDhcpControlRelayRemoteId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.8 | OCTET STRING | read-write | Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. (obsoleted in V135) |
| OCT sheDhcpControlProviderName | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.9 | OCTET STRING | read-write | Look at table description... Spaces and other special characters (: ?) are not allowed!! |
| OCT sheDhcpControlServerIpAddress1 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.10 | OCTET STRING | read-write | Look at table description... |
| OCT sheDhcpControlServerIpAddress2 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.11 | OCTET STRING | read-write | Look at table description... |
| OCT sheDhcpControlServerIpAddress3 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.12 | OCTET STRING | read-write | Look at table description... |
| OCT sheDhcpControlServerGateway | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.13 | OCTET STRING | read-write | Look at table description... Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable. |
| I32 sheDhcpControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.14 | Integer32 | read-write | Look at table description... Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId. |
| OCT sheDhcpControlRelayAgentIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.15 | OCTET STRING | read-write | The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. |
| OCT sheDhcpControlRelayAgentNetmask | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.16 | OCTET STRING | read-write | The RelayAgent Netmask. Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable. |
| SHE sheDhcpControlRelayAgentOption | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.17 | SheDhcpRelayAgentOptionType | read-write | Look at table description... With R2.7 additional options for LineProperty are possible (value 12..23). |
| T/F sheDhcpControlCebsMacTranslation | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.18 | TruthValue | read-write | configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers. |
| T/F sheDhcpControlRelayAgentMgmt | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.19 | TruthValue | read-write | Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay. |
| I32 sheDhcpControlInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.20 | Integer32 | read-write | The index of inner-vlan when to forward Dhcp Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. Only valid for simplified DHCP agent configuration. Look at table description. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId. |
| T/F sheDhcpControlBcastTranslationDs | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.21 | TruthValue | read-write | Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers. |
| SHE sheDhcpControlUseInnerTagForProtocols | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.22 | SheDhcpUseTagForProtocolsType | read-write | Used for configuration of global DHCP and PPPoE useTag settings. BITS { dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1) } If bit is set to 1 the corresponding global parameter is set to true. Support with R2.8. |
| OCT sheDhcpControlLinePropertyNodeIdentifier | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.23 | OCTET STRING | read-write | This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7. |
| T/F sheDhcpControlStationMoveEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.25 | TruthValue | read-write | This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8. |
| OCT sheDhcpControlServerIpAddress4 | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.26 | OCTET STRING | read-write | Look at table description... |
| sheDhcpNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5 | |||
| NTF sheDhcpProviderEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.1 | A new dhcp provider table entry was created. | ||
| NTF sheDhcpProviderEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.2 | A dhcp provider table entry was modified. | ||
| NTF sheDhcpProviderEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.3 | A dhcp provider table entry was deleted. | ||
| NTF sheDhcpRelayAdminStateModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.4 | The dhcp relay admin state was modified. | ||
| NTF sheDhcpRelayOptionModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.5 | The dhcp relay option was modified. | ||
| NTF sheDhcpRelayRemoteIdModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.6 | The dhcp relay remote id was modified. | ||
| NTF sheDhcpFloodVlanIdAdded | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.7 | The dhcp flood vlanid was added. It becomes obsolete. | ||
| NTF sheDhcpFloodVlanIdDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.8 | The dhcp flood vlanid was deleted. It becomes obsolete. | ||
| NTF sheDhcpFloodVlanIdModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.9 | The dhcp flood vlanid was modified. | ||
| NTF sheDhcpTagForProtocolsModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.10 | The dhcp and pppoe global useTag options were modified. | ||
| NTF sheDhcpStationMoveEnableModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.11 | The dhcp station move enable switch was modified. | ||
| sheDhcpFloodVlanIdTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7 | not-accessible | The dhcp flood vlanid table. | |
| sheDhcpFloodVlanIdEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1 | not-accessible | One entry for each dhcp flood vlanid. | |
| I32 sheDhcpFloodVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.1 | Integer32 | read-only | Index of that table. Will be identical to the used sheVlanIndex. |
| SHE sheDhcpFloodVlanEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.2 | SheDhcpFloodingType | read-only | Enable or disable a flooding vlan for DHCP packets. The default is false. New with R2.8: Flooding of DHCP or PPPoE packets could now be separatly enabled. The former command switch always both protocol types. |
| sheDhcpFloodVlanIdControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8 | |||
| SHE sheDhcpFloodVlanIdControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.1 | SheBridgeControlRequestType | read-write | setDhcpFloodVlanId: sheDhcpFloodVlanIdControlVlanId sheDhcpFloodVlanIdControlVlanEnabled |
| SHE sheDhcpFloodVlanIdControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.2 | SheControlStatusType | read-only | The status of a control request |
| G32 sheDhcpFloodVlanIdControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.3 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. The manager reads this value from the SHE. |
| SHE sheDhcpFloodVlanIdControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.4 | SheBridgeControlReqResultType | read-only | The result of the last user command |
| U32 sheDhcpFloodVlanIdControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.5 | Unsigned32 | read-only | The time stamp of the last command (end of command) |
| I32 sheDhcpFloodVlanIdControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.6 | Integer32 | read-write | VLAN ID which is controlled for Dhcp flooding |
| SHE sheDhcpFloodVlanIdControlVlanEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.7 | SheDhcpFloodingType | read-write | look at table. Expanded with R2.8 maintenance. |
| sheDhcpConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100 | |||
| sheDhcpCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.1 | |||
| sheDhcpCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.1.1 | Description. | ||
| sheDhcpRelayGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2 | |||
| sheDhcpBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.1 | Description. | ||
| sheDhcpProviderGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.2 | Description. | ||
| sheDhcpControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.3 | Description. | ||
| sheDhcpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.4 | Description. | ||
| sheDhcpFloodVlanIdGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.5 | Description. | ||
| sheDhcpFloodVlanIdControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.6 | Description. | ||
| sheDhcpObsoleteGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.7 | Description. | ||
| sheDhcpObsoleteNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.8 | Description. | ||
| sheIgmp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7 | |||
| sheIgmpBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2 | |||
| SHE sheIgmpMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.2 | SheIgmpModeType | read-only | IGMP operation mode can be off proxy That is the general NE igmp on/off switch. |
| OCT sheIgmpVersion | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.3 | OCTET STRING | read-only | The version of IGMP which is running on this interface (detected by the NE). The NE uses version 2 as default. If version 1 members are detected on the IP subnet attached to this interface, the NE falls back to version 1. Note: This parameter is not longer supported starting with release SHE R2.8 The used version should be configured per IGMP profileVlan entry. |
| U32 sheIgmpMaxJoinedSubscriber | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.4 | Unsigned32 | read-only | The maximum number of subscribers who can join a multicast group in the system. Note: This parameter is not longer supported starting with release SHE R2.6. |
| U32 sheIgmpMaxJoinedGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.5 | Unsigned32 | read-only | The maximum number of multicast groups that could be joined in the system. |
| SHE sheIgmpVlanTranslationMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.6 | SheIgmpVlanMode | read-only | Configure VLAN translation mode for the system. 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. |
| SHE sheIgmpVlanDoubleTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.7 | SheIgmpVlanMode | read-only | Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. |
| sheIgmpDoubleTaggingControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9 | |||
| SHE sheIgmpDoubleTaggingControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.1 | SheBridgeControlRequestType | read-write | New with SHE R.8. setIgmpTagMode: sheIgmpControlVlanTranslationMode sheIgmpControlVlanDoubleTaggingMode |
| SHE sheIgmpDoubleTaggingControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpDoubleTaggingControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpDoubleTaggingControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpDoubleTaggingControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheIgmpControlVlanTranslationMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.6 | SheIgmpVlanMode | read-write | Configure VLAN translation mode for the system, 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. |
| SHE sheIgmpControlVlanDoubleTaggingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.7 | SheIgmpVlanMode | read-write | Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. |
| sheIgmpProfileTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5 | not-accessible | The table has one provider entry. It contains the provider VLAN and the host and querier settings. | |
| sheIgmpProfileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1 | not-accessible | In first release we will only support one table entry. | |
| U32 sheIgmpProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.1 | Unsigned32 | read-only | A table Index. |
| STR sheIgmpProviderProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.2 | DisplayString | read-only | Name for easy profile handling. Spaces and other special characters (: ?) are not allowed!! |
| OCT sheIgmpProviderProxyIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.3 | OCTET STRING | read-only | The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction. |
| U32 sheIgmpProviderRobustness | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.4 | Unsigned32 | read-only | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. |
| U32 sheIgmpProviderQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.5 | Unsigned32 | read-only | The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. |
| U32 sheIgmpProviderQueryResponseInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.6 | Unsigned32 | read-only | The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval. |
| U32 sheIgmpProviderStartupQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.7 | Unsigned32 | read-only | The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. |
| U32 sheIgmpProviderStartupQueryCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.8 | Unsigned32 | read-only | The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. |
| U32 sheIgmpProviderLastMemberQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.9 | Unsigned32 | read-only | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. |
| U32 sheIgmpProviderLastMemberQueryCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.10 | Unsigned32 | read-only | The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. |
| SHE sheIgmpProviderImmediateLeave | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.11 | ShePermissionType | read-only | If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. Note: Not longer configurable with R2.8. |
| U32 sheIgmpProviderUnsolicitedReportInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.12 | Unsigned32 | read-only | The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream). |
| U32 sheIgmpProviderVersion1RouterTimeout | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.13 | Unsigned32 | read-only | The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout. |
| TIK sheIgmpProviderVersion1RouterPresentTimeout | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.14 | TimeTicks | read-only | The time remaining until a host will assume that there are no longer any IGMP version 1 routers on the IP subnet attached to this interface. Upon hearing any Version 1 Query, this value is reset to the group membership timer. While this time remaining is non-zero, it may not send any IGMPv2 messages. The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterPresentTimeout. |
| T/F sheIgmpProviderVlanMulticastLimitation | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.15 | TruthValue | read-only | Configures all possible multicast addresses for IGMP on a per VLAN basis. This parameter indicates whether this IGMP provider have the limitation on the multicast group/packages or not. Value can be true(1) or false(2). False means all subscriber can join all multicast streams through to this whole VLAN if they are member of this vlan (unlimited access). True is the default state and means only configured groups/packages could be joined (limited access). |
| U32 sheIgmpProviderMcastBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.16 | Unsigned32 | read-only | This is the configured multicast bandwith limitation per provider. The value 65535 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control - default). New parameter with SHE R2.8. |
| U32 sheIgmpProviderDefaultChannelBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.17 | Unsigned32 | read-only | This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8 |
| sheIgmpProfileControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6 | |||
| SHE sheIgmpProviderControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.1 | SheBridgeControlRequestType | read-write | setIgmpMode: sheIgmpProviderControlMode setIgmpMaxJoinedSubscribers: (Note: Not longer supported starting with release SHE R2.6.) sheIgmpProviderControlMaxJoinedSubscribers setIgmpMaxJoinedGroup: sheIgmpProviderControlMaxJoinedGroup createIgmpProviderEntry: sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation modifyIgmpProviderEntry: sheIgmpProviderControlIndex sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation deleteIgmpProviderEntry: sheIgmpProviderControlIndex New with SHE R2.8: setIgmpProviderChannelAdmission (743): sheIgmpProviderControlIndex sheIgmpProviderControlMcastBandwithLimit sheIgmpProviderControlDefaultChannelBandwith |
| SHE sheIgmpProviderControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpProviderControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpProviderControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpProviderControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheIgmpProviderControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.6 | Unsigned32 | read-write | index of sheIgmpProviderTable parameter for - modifyIgmpProviderEntry - deleteIgmpProviderEntry - setIgmpProviderEntrySourceList |
| SHE sheIgmpProviderControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.7 | SheIgmpModeType | read-write | IGMP operation mode can be off proxy parameter for - setIgmpMode That is the general NE igmp on/off switch. |
| STR sheIgmpProviderControlProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.8 | DisplayString | read-write | Name for easy profile handling. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| OCT sheIgmpProviderControlProxyIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.9 | OCTET STRING | read-write | The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlRobustness | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.10 | Unsigned32 | read-write | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.11 | Unsigned32 | read-write | The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlQueryResponseInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.12 | Unsigned32 | read-write | The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlStartupQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.13 | Unsigned32 | read-write | The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlStartupQueryCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.14 | Unsigned32 | read-write | The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlLastMemberQueryInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.15 | Unsigned32 | read-write | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlLastMemberQueryCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.16 | Unsigned32 | read-write | The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| SHE sheIgmpProviderControlImmediateLeave | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.17 | ShePermissionType | read-write | If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry Note: Not longer configurable with R2.8. |
| U32 sheIgmpProviderControlUnsolicitedReportInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.18 | Unsigned32 | read-write | The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream). parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry |
| U32 sheIgmpProviderControlVersion1RouterTimeout | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.19 | Unsigned32 | read-write | The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout. |
| U32 sheIgmpProviderControlMaxJoinedSubscriber | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.20 | Unsigned32 | read-write | The maximum number of joined subscribers in the system. Note: This parameter is not longer supported starting with release SHE R2.6. |
| U32 sheIgmpProviderControlMaxJoinedGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.21 | Unsigned32 | read-write | The maximum number of multicast groups that could be joined in the system. |
| T/F sheIgmpProviderControlVlanMulticastLimitation | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.22 | TruthValue | read-write | true(1),false(2) look at table |
| U32 sheIgmpProviderControlMcastBandwithLimit | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.23 | Unsigned32 | read-write | This is the configured multicast bandwith limitation per provider. The value 655353 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control). New parameter with SHE R2.8. |
| U32 sheIgmpProviderControlDefaultChannelBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.24 | Unsigned32 | read-write | This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8 |
| sheIgmpProfileVlanTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7 | not-accessible | The table assigns a VLANs for multicast traffic to multicast provider profiles. Both a Vlan and a profile can be assigned only once. | |
| sheIgmpProfileVlanEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1 | not-accessible | A table entry assigns a VLAN for multicast traffic to a multicast provider profile. Both a Vlan and a profile can be assigned only once. | |
| I32 sheIgmpProfileVlanVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.2 | Integer32 | read-only | The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan. |
| OCT sheIgmpProfileVlanMcastEgressPorts | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.3 | OCTET STRING | read-only | List of all fully configured subscriber ports of this multicast VLAN. The list is updated whenever any part of the chain bridgePort->MCastPackage->IgmpGroup changes. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet. |
| I32 sheIgmpProfileVlanInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.4 | Integer32 | read-only | An inner vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case. |
| U32 sheIgmpProfileVlanDot1pPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.5 | Unsigned32 | read-only | The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers. |
| U32 sheIgmpProfileVlanDot1pReportPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.6 | Unsigned32 | read-only | The priority of an IGMP report that is inserted in vlan tag when a host sends it to router. |
| U32 sheIgmpProfileVlanDot1pInnerPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.7 | Unsigned32 | read-only | The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode. |
| U32 sheIgmpProfileVlanDot1pInnerReportPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.8 | Unsigned32 | read-only | The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode. |
| SHE sheIgmpProfileVlanForkingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.9 | SheIgmpProfileVlanForkingModeType | read-only | IGMP forking function enabled will send the original IGMP messages with actual MAC address of the clients (e.g. STB) and the corresponding/preserved customer VLAN ID towards the BRAS/Edge Router regardless of IGMP proxy configuration/operation. Possible values: noForking(0), ipoeForking(1), pppoeForking(2) |
| I32 sheIgmpProfileVlanOuterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.10 | Integer32 | read-only | An outer vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case. New with R2.8. |
| SHE sheIgmpProfileVlanVersion | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.11 | SheIgmpVersionType | read-only | Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8 |
| SHE sheIgmpProfileVlanASMStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.12 | SheIgmpProviderASM | read-only | Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. New parameter with SHE R2.8 |
| SHE sheIgmpProfileVlanCxUSnoopingState | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.13 | SheIgmpProviderVlanCxuSnoopingState | read-only | It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. Default value is disable. New parameter with SHE R2.8 |
| OCT sheIgmpProfileVlanDefaultSourceIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.14 | OCTET STRING | read-only | This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of related group's points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will be outvoted by a similar configuration for the related IgmpGroup. New parameter with SHE R2.8 maintenance. |
| sheIgmpProfileVlanControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8 | |||
| SHE sheIgmpProfileVlanControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.1 | SheBridgeControlRequestType | read-write | createIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlVlanId - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex modifyIgmpProfileVlanDot1p: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) R2.4 only modifyIgmpProfileVlanForkingMode: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlForkingMode |
| SHE sheIgmpProfileVlanControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpProfileVlanControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpProfileVlanControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpProfileVlanControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheIgmpProfileVlanControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.6 | Unsigned32 | read-write | The index sheIgmpProviderIndex of the provider specific multicast profile. parameter for - createIgmpProfileVlanEntry - deleteIgmpProfileVlanEntry |
| I32 sheIgmpProfileVlanControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.7 | Integer32 | read-write | The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan. parameter for - deleteIgmpProfileVlanEntry |
| I32 sheIgmpProfileVlanControlInnerVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.8 | Integer32 | read-write | An inner vlanid for this igmp provider vlan or 0 if not used. |
| U32 sheIgmpProfileVlanControlDot1pPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.9 | Unsigned32 | read-write | The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers. |
| U32 sheIgmpProfileVlanControlDot1pReportPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.10 | Unsigned32 | read-write | The priority of an IGMP report that is inserted in vlan tag when a host sends it to router. |
| U32 sheIgmpProfileVlanControlDot1pInnerPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.11 | Unsigned32 | read-write | The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode. |
| U32 sheIgmpProfileVlanControlDot1pInnerReportPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.12 | Unsigned32 | read-write | The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode. |
| SHE sheIgmpProfileVlanControlForkingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.13 | SheIgmpProfileVlanForkingModeType | read-write | When it's set to 0, it means no forking, when set to 1 it means forking mode is IPoE forking, when set to 2, PPPoE forking is used for the provider |
| I32 sheIgmpProfileVlanControlOuterVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.14 | Integer32 | read-write | An outer vlanid for this igmp provider vlan or 0 if not used. |
| SHE sheIgmpProviderControlVersion | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.15 | SheIgmpVersionType | read-write | Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8. |
| SHE sheIgmpProviderControlASMStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.16 | SheIgmpProviderASM | read-write | Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8. |
| SHE sheIgmpProfileVlanControlCxUSnoopingState | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.17 | SheIgmpProviderVlanCxuSnoopingState | read-write | It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8. |
| OCT sheIgmpProfileVlanControlDefaultSourceIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.18 | OCTET STRING | read-write | look at table New parameter with SHE R2.8 maintenance. |
| sheIgmpGroupTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9 | not-accessible | The table contains entries for multicast groups. A group has a specific multicast address, belongs to a provider and to a multicast group package. | |
| sheIgmpGroupEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1 | not-accessible | One entry for each Igmp-Group. If IGMPv3 is running, each table entry represent a single channel configuration. | |
| U32 sheIgmpGroupIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.1 | Unsigned32 | read-only | A table Index. |
| OCT sheIgmpGroupIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.2 | OCTET STRING | read-only | The used Multicast IP-Address. If these Address is set to 00000000, it should work as a * wildcard configuration, it means an any group (S,*) channel. |
| OCT sheIgmpGroupName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.3 | OCTET STRING | read-only | A unique name for this multicast group. Spaces and other special characters (: ?) are not allowed!! |
| U32 sheIgmpGroupProviderId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.4 | Unsigned32 | read-only | That is the index of the corresponding sheIgmpProviderTable entry. |
| OCT sheIgmpGroupMcastGroupPackageList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.5 | OCTET STRING | read-only | That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. The least significant byte is the second octet. |
| OCT sheIgmpGroupJoinedPortsList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.6 | OCTET STRING | read-only | List of subscribers currently subscribing this multicast group. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet. A change in this list will not be reported by a trap. |
| TIK sheIgmpGroupLastMembershipReport | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.7 | TimeTicks | read-only | Time since the last membership report has been sent upstream by the proxy for this multicast group. |
| TIK sheIgmpGroupLastLeaveMessage | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.8 | TimeTicks | read-only | Time since the last leave group message has been sent upstream by the proxy for this multicast group. |
| OCT sheIgmpGroupSuppliedCardList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.9 | OCTET STRING | read-only | List of entPhysIndices currently receiving data of this multicast group. The octet string is a list of pairs of octets each identifying an entPhysIndex for that card. The least significant byte is the second octet. A change in this list will not be reported by a trap. |
| T/F sheIgmpGroupIsStatic | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.10 | TruthValue | read-only | Enable or disable static multicast group configuration. |
| U32 sheIgmpMcastChannelSourceId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.11 | Unsigned32 | read-only | This is a index which points to valid entry of the sheIgmpSourceIpAddressTable. If the source IP of the index is 0.0.0.0 (default), it should work as a '*' wildcard configuration and no restriction of possible source ip addresses are made (*,G). In case of IGMP mode iGMPv3 or iGMPv3Compatible ASM will be used. This setting is also valid for mode iGMPv2 usage. The configuration of other source IP's is only valid if iGMPv3 or iGMPv3Compatible mode is running. New parameter with SHE R2.8. |
| U32 sheIgmpMcastChannelBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.12 | Unsigned32 | read-only | The bandwith of this channel, with a range of 0..500 representing the bandwith with a granularity of 100kBits. New parameter with SHE R2.8. |
| OCT sheIgmpMcastChannelDefaultSourceIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.13 | OCTET STRING | read-only | This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of these group points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will outvote a similar configuration for the corresponding IgmpProvider. New parameter with SHE R2.8 maintenance. |
| sheIgmpGroupControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10 | |||
| SHE sheIgmpGroupControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.1 | SheBridgeControlRequestType | read-write | createIgmpGroupEntry: sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlProviderId sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) modifyIgmpGroupEntry: sheIgmpGroupControlIndex sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpGroupEntry: sheIgmpGroupControlIndex New with SHE R2.8: setIgmpMcastChannelParameter: sheIgmpGroupControlIndex sheIgmpMcastChannelControlBandwith |
| SHE sheIgmpGroupControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpGroupControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpGroupControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpGroupControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| I32 sheIgmpGroupControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.6 | Integer32 | read-write | The index of the sheIgmpGroupEntry to be modified. parameter for - modifyIgmpGroupEntry - deleteIgmpGroupEntry |
| OCT sheIgmpGroupControlIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.7 | OCTET STRING | read-write | The used Multicast IP-Address. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry If these Address is set to 00000000, it should work as a * wildcard configuration. |
| OCT sheIgmpGroupControlName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.8 | OCTET STRING | read-write | A unique name for this multicast group. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry |
| I32 sheIgmpGroupControlProviderId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.9 | Integer32 | read-write | That is the index of the corresponding sheIgmpProviderTable entry. parameter for - createIgmpGroupEntry |
| OCT sheIgmpGroupControlMcastGroupPackageList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.10 | OCTET STRING | read-write | That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry |
| T/F sheIgmpGroupControlIsStatic | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.11 | TruthValue | read-write | Enable or disable static multicast group configuration. |
| U32 sheIgmpMcastChannelControlSourceId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.12 | Unsigned32 | read-write | look at table. New parameter with SHE R2.8. |
| U32 sheIgmpMcastChannelControlBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.13 | Unsigned32 | read-write | look at table. parameter for: -setIgmpMcastChannelParameter: New parameter with SHE R2.8. |
| OCT sheIgmpMcastChannelControlDefaultSourceIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.14 | OCTET STRING | read-write | look at table New parameter with SHE R2.8 maintenance. |
| sheIgmpMcastGroupPackageTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11 | not-accessible | The table contains entry's they combines multicast groups to a multicast group package. | |
| sheIgmpMcastGroupPackageEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1 | not-accessible | One entry for each multicast group package. | |
| U32 sheIgmpMcastGroupPackageIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.1 | Unsigned32 | read-only | Index of the package-table. |
| OCT sheIgmpMcastGroupPackageName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.2 | OCTET STRING | read-only | That should be a descriptional name. Spaces and other special characters (: ?) are not allowed!! |
| OCT sheIgmpMcastGroupPackageGroupList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.3 | OCTET STRING | read-only | That is a list of pairs of octets each identifying a corresponding index of the sheIgmpGroupTable. It shows the groups that are members of the package. The list is updated by the NE when the package list of a group is modified. The least significant byte is the second octet. |
| sheIgmpMcastGroupPackageControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12 | |||
| SHE sheIgmpMcastGroupPackageControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.1 | SheBridgeControlRequestType | read-write | createIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlName deleteIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlIndex |
| SHE sheIgmpMcastGroupPackageControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpMcastGroupPackageControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpMcastGroupPackageControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpMcastGroupPackageControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheIgmpMcastGroupPackageControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.6 | Unsigned32 | read-write | A table index. |
| OCT sheIgmpMcastGroupPackageControlName | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.7 | OCTET STRING | read-write | That should be a descriptional name. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpMcastGroupPackage |
| sheIgmpPortGroupsTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13 | not-accessible | For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast groups a port has currently joined. Because IgmpV3 allow the configuration of wildcard's for used multicast and/or source IP address, R2.8 maintenance modify the second table index to a free running index and add parameter to show the used multicast IP address. | |
| sheIgmpPortGroupsEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1 | not-accessible | If IGMPv3 is running, it represent a joined channel! | |
| OCT sheIgmpPortGroupsStpIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.1 | OCTET STRING | read-only | The IP address of the subsribers host (set top box) that has joined the multicast group. Each Ip address is a set of 4 octets. Expanded with R2.8: If Igmpv3 is running up to five boxes could be listed here. |
| TIK sheIgmpPortGroupsTimeFirstMembRep | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.2 | TimeTicks | read-only | The time when the first membership report for the joined multicast group has been received from the subscriber. Note: Set to obsolete with R2.8 - no valid information could be returned! |
| TIK sheIgmpPortGroupsTimeLastMembRep | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.3 | TimeTicks | read-only | The time when the last membership report for the joined multicast group has been received from the subscriber. |
| SHE sheIgmpPortGroupsFiltermode | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.4 | SheIgmpPortGroupsFiltermodeType | read-only | This parameter may be either INCLUDE or EXCLUDE. In INCLUDE mode, reception of packets sent to the specified multicast address is requested *only* from those IP source address listed in the source-id parameter. In EXCLUDE mode, reception of packets sent to the given multicast address is requested from all IP source addresses *except* those listed in the source-id parameter. New parameter with SHE R2.8 and only valid for IGMPv3. |
| OCT sheIgmpPortGroupsSourceId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.5 | OCTET STRING | read-only | This is an IP unicast addresses from which multicast reception is desired or not desired, depending on the filter mode. IP address entry consist of 4 Octets and should be a subset or identical to the corresponding sheIgmpMcastChannelSourceId of the joined group. New parameter with SHE R2.8 and only valid for IGMPv3. |
| OCT sheIgmpPortGroupsIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.6 | OCTET STRING | read-only | The used Multicast IP-Address of the joined group. New parameter with SHE R2.8 maintenance. |
| U32 sheIgmpPortGroupsIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.7 | Unsigned32 | read-only | The new second tableIndex starting with R2.8 maintenance. It is a free running Index which show the amount of actual joined groups by this subscriber. |
| sheIgmpNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14 | |||
| NTF sheIgmpModeModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.1 | The general IGMP operation mode has been modified by the operator. | ||
| NTF sheIgmpProfileEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.2 | A new entry in the sheIgmpProfileTable has been created by the operator. | ||
| NTF sheIgmpProfileEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.3 | An entry in the sheIgmpProfileTable has been modified by the operator. | ||
| NTF sheIgmpProfileEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.4 | An entry in the sheIgmpProfileTable has been deleted by the operator. | ||
| NTF sheIgmpProfileControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.5 | Notification of port command ending and result in case of long running command. | ||
| NTF sheIgmpProfileVlanEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.6 | A new entry in the sheIgmpProfileVlanTable has been created by the operator. | ||
| NTF sheIgmpProfileVlanEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.7 | An entry in the sheIgmpProfileVlanTable has been modified by the NE. The sheIgmpProfileVlanMcastEgressPorts has changed. | ||
| NTF sheIgmpProfileVlanEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.8 | An entry in the sheIgmpProfileVlanTable has been deleted by the operator. | ||
| NTF sheIgmpProfileVlanControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.9 | Notification of port command ending and result in case of long running command. | ||
| NTF sheIgmpGroupEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.10 | A new entry in the sheIgmpGroupTable has been created by the operator. | ||
| NTF sheIgmpGroupEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.11 | An entry in the sheIgmpGroupTable has been modified by the operator. | ||
| NTF sheIgmpGroupEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.12 | An entry in the sheIgmpGroupTable has been deleted by the operator. | ||
| NTF sheIgmpGroupControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.13 | Notification of port command ending and result in case of long running command. | ||
| NTF sheIgmpMcastGroupPackageEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.14 | An entry in the sheIgmpMcastGroupPackageTable has been created by the operator. | ||
| NTF sheIgmpMcastGroupPackageEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.15 | An entry in the sheIgmpMcastGroupPackageTable has been modified by the NE. The sheIgmpMcastGroupPackageGroupList has changed. | ||
| NTF sheIgmpMcastGroupPackageEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.16 | An entry in the sheIgmpMcastGroupPackageTable has been deleted by the operator. | ||
| NTF sheIgmpMcastGroupPackageControlResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.17 | Notification of port command ending and result in case of long running command. | ||
| NTF sheIgmpMaxJoinedSubscriberModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.18 | The general IGMP MaxJoinedSubscriber-Value has been modified by the operator. Note: This parameter is not longer supported starting with release SHE R2.6. | ||
| NTF sheIgmpFloodVlanCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.19 | An entry in the sheIgmpFloodVlanTable was created by the operator. | ||
| NTF sheIgmpFloodVlanDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.20 | An entry in the sheIgmpFloodVlanTable was deleted by the operator. | ||
| NTF sheIgmpProfileVlanDot1pModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.21 | An entry of Dot1p in the sheIgmpProfileVlanTable has been modified by the operator. | ||
| NTF sheIgmpMaxJoinedGroupModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.22 | The maximum number of multicast group that a subscriber can join has been modified by the operator. | ||
| NTF sheIgmpProfileChannelAdmissionModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.24 | IGMP Mcast admission control feature configuration done. New with R2.8. | ||
| NTF sheIgmpChannelParameterModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.25 | IGMPv3 group channel releated parameters modified. | ||
| NTF sheIgmpSourceIpEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.26 | Igmpv3 SourceIpAddress entry created. | ||
| NTF sheIgmpSourceIpEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.27 | Igmpv3 SourceIpAddress entry deleted. | ||
| NTF sheIgmpTagModeModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.34 | The general IGMP Tag parameterS has been modified by the operator. | ||
| sheIgmpPerformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16 | |||
| sheIgmpPerformanceMonitoring | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1 | |||
| sheIgmpPmObjectTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1 | not-accessible | The table holds all IGMP PM objects existing in the NE. | |
| sheIgmpPmObjectEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1 | not-accessible | A table entry shows the multicast group a PM object is related to. | |
| U32 sheIgmpPmObjectIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.1 | Unsigned32 | read-only | Unique index for IGMP PM objects existing in the NE. One multicast group can have one PM object, including both interval types. |
| U32 sheIgmpPmObjectGroupIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.2 | Unsigned32 | read-only | Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is related to. |
| sheIgmpPmCurrentTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2 | not-accessible | This table contains the entries for Performance Monitoring for multicast groups of the current 15 minute interval and the current day. | |
| sheIgmpPmCurrentEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1 | not-accessible | An entry describing the current PM data of a multicast group for a certain interval type. Indices are sheIgmpPmObjectIndex and sheIgmpPmCurrentIntervalType. | |
| NUM sheIgmpPmCurrentIntervalType | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.1 | ShePmIntervalType | read-only | This attribute is used to select between the 15 min or the day accumulation types. |
| SHE sheIgmpPmCurrentAdminState | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.2 | SheAdminStateType | read-write | This read-write attribute is used to activate (up) and deactivate (down) performance monitoring for the multicast group and interval type. |
| SHE sheIgmpPmCurrentSuspectFlag | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.3 | ShePmSuspectFlagType | read-only | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| U32 sheIgmpPmCurrentHistEntrySize | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.4 | Unsigned32 | read-only | The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired. |
| U32 sheIgmpPmCurrentHistEntriesAvailable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.5 | Unsigned32 | read-only | This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and sheIgmpPmCurrentHistEntrySize. Thereby 0 means that this entry is not valid. |
| U32 sheIgmpPmCurrentElapsedTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.6 | Unsigned32 | read-only | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval). |
| U32 sheIgmpPmCurrentMembershipReportsFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.7 | Unsigned32 | read-only | Successful join requests for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmCurrentPeakMembershipReportsFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.8 | Unsigned32 | read-only | Peak of successful join requests per second for the multicast group received from the subscriber ports. |
| TIK sheIgmpPmCurrentTimeOfPeakMembershipReports | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.9 | TimeTicks | read-only | Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmCurrentGroupLeavesFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.10 | Unsigned32 | read-only | IGMP group leave messages for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmCurrentPeakGroupLeavesFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.11 | Unsigned32 | read-only | Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports. |
| TIK sheIgmpPmCurrentTimeOfPeakGroupLeaves | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.12 | TimeTicks | read-only | Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmCurrentMembershipReportsToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.13 | Unsigned32 | read-only | Successful join requests for the multicast group sent to the router. |
| U32 sheIgmpPmCurrentGroupLeavesToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.14 | Unsigned32 | read-only | IGMP group leave messages for the multicast group sent to the router. |
| U32 sheIgmpPmCurrentPeakMulticastLeaves | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.15 | Unsigned32 | read-only | The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports. |
| sheIgmpPmHistoryTableTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3 | not-accessible | A table containing all IGMP PM history data. Indices of the table are the PM object, the interval type and the record number. | |
| sheIgmpPmHistoryTableEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1 | not-accessible | An entry describing the history PM data of a multicast group for a certain interval type and record number. | |
| NUM sheIgmpPmHistoryIntervalType | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.1 | ShePmIntervalType | read-only | This attribute is used to select between the 15 min or the day accumulation types. |
| U32 sheIgmpPmHistoryEntryNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.2 | Unsigned32 | read-only | This attribute is an index used to address the PM history entry. Entry 1 is the most recent. The range of values is between 1 and sheIgmpPmCurrentHistEntrySize. |
| SHE sheIgmpPmHistorySuspectFlag | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.3 | ShePmSuspectFlagType | read-only | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| TIK sheIgmpPmHistoryPeriodEndTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.4 | TimeTicks | read-only | Date/time at the end of the selected interval. |
| U32 sheIgmpPmHistoryMembershipReportsFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.5 | Unsigned32 | read-only | Successful join requests for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmHistoryPeakMembershipReportsFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.6 | Unsigned32 | read-only | Peak of successful join requests per second for the multicast group received from the subscriber ports. |
| TIK sheIgmpPmHistoryTimeOfPeakMembershipReports | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.7 | TimeTicks | read-only | Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmHistoryGroupLeavesFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.8 | Unsigned32 | read-only | IGMP group leave messages for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmHistoryPeakGroupLeavesFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.9 | Unsigned32 | read-only | Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports. |
| TIK sheIgmpPmHistoryTimeOfPeakGroupLeaves | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.10 | TimeTicks | read-only | Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports. |
| U32 sheIgmpPmHistoryMembershipReportsToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.11 | Unsigned32 | read-only | Successful join requests for the multicast group sent to the router. |
| U32 sheIgmpPmHistoryGroupLeavesToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.12 | Unsigned32 | read-only | IGMP group leave messages for the multicast group sent to the router. |
| U32 sheIgmpPmHistoryPeakMulticastLeaves | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.13 | Unsigned32 | read-only | The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports. |
| sheIgmpPerformanceControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2 | |||
| SHE sheIgmpPmControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.1 | SheBridgeControlRequestType | read-write | createPmObject sheIgmpPmControlGroupIndex sheIgmpPmControlHistEntrySize modifyPmObject sheIgmpPmControlObjectIndex sheIgmpPmControlIntervalType sheIgmpPmControlHistEntrySize deletePmObject sheIgmpPmControlObjectIndex |
| SHE sheIgmpPmControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpPmControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpPmControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpPmControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheIgmpPmControlObjectIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.6 | Unsigned32 | read-write | Index sheIgmpPmObjectIndex of the PM object in the sheIgmpPmObjectTable to be modified or deleted. parameter for modifyPmObject deletePmObject |
| U32 sheIgmpPmControlObjectGroupIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.7 | Unsigned32 | read-write | Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is created for. parameter for createPmObject |
| NUM sheIgmpPmControlIntervalType | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.8 | ShePmIntervalType | read-write | This attribute is used to select between the 15 min or the day accumulation types. parameter for modifyPmObject |
| U32 sheIgmpPmControlHistEntrySize | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.9 | Unsigned32 | read-write | The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired. In case of PM object creation the number of 15 min entries is set and the number of 24 h entries is always 1. parameter for createPmObject modifyPmObject |
| U32 sheIgmpPmControlRemainingHistoryEntries | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.10 | Unsigned32 | read-only | The number of history entries which are still available for the PM data collection within the NE. The memory for PM data is limited. The manager can read this attribute before/after the execution of PM object commands to inform himself about the remaining history size. |
| sheIgmpPerformanceNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3 | |||
| NTF sheIgmpPmObjectCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.1 | IGMP PM object has been created. | ||
| NTF sheIgmpPmObjectModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.2 | IGMP PM object has been modified. | ||
| NTF sheIgmpPmObjectDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.3 | IGMP PM object has been deleted. | ||
| sheIgmpPerformanceConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4 | |||
| sheIgmpPerformanceCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1 | |||
| sheIgmpPerformanceCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1.1 | Description. | ||
| sheIgmpPerformanceGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2 | |||
| sheIgmpPmObjectGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.1 | Description. | ||
| sheIgmpPmCurrentGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.2 | Description. | ||
| sheIgmpPmHistoryGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.3 | Description. | ||
| sheIgmpPmControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.4 | Description. | ||
| sheIgmpPmNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.5 | Description. | ||
| sheIgmpStatistics | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17 | |||
| sheIgmpStatsGroupTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1 | not-accessible | The table holds IGMP statistics group table in the NE. | |
| sheIgmpStatsGroupEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1 | not-accessible | The table entry shows the IGMP group statistics. | |
| U32 sheIgmpStatsGroupIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.1 | Unsigned32 | read-only | Identifier of sheIgmpGroupTable |
| TIK sheIgmpStatsGroupTimeSinceLastMembershipReport | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.2 | TimeTicks | read-only | Time since last Membership Report was received for acticve dynamic multicast cross-connection. |
| sheIgmpStatsBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2 | |||
| C32 sheIgmpStatsNumberOfGroupsToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.1 | Counter32 | read-only | The Number of active multicast connections cross-connected by the DSLAM |
| C32 sheIgmpStatsNumberOfGroupsToHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.2 | Counter32 | read-only | The Number of different ip multicast groups currently connected to end users |
| C32 sheIgmpStatsNumberOfQueryReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.3 | Counter32 | read-only | The Number of Igmp query message received by DSLAM |
| C32 sheIgmpStatsNumberOfReportReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.4 | Counter32 | read-only | The Number of Igmp report message received by DSLAM |
| C32 sheIgmpStatsNumberOfLeaveReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.5 | Counter32 | read-only | The Number of Igmp leave message received by DSLAM |
| C32 sheIgmpStatsNumberOfInvalidReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.6 | Counter32 | read-only | The Number of invalid message received by DSLAM |
| C32 sheIgmpStatsPeakNumberOfActiveGroupToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.7 | Counter32 | read-only | The number of active multicast connections cross-connected by the DSLAM per second when the peak |
| TIK sheIgmpStatsTimeOfPeakNumberOfActiveGroupToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.8 | TimeTicks | read-only | Time and date of the peak of active multicast connections cross-connected by the DSLAM |
| C32 sheIgmpStatsPeakNumberOfActiveGroupFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.9 | Counter32 | read-only | The number of different ip multicast groups currently connected to end users per second when the peak |
| TIK sheIgmpStatsTimeOfPeakNumberOfActiveGroupFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.10 | TimeTicks | read-only | Time and date of the peak of different ip multicast groups currently connected to end users |
| G32 sheIgmpStatsNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.11 | Gauge32 | read-only | IGMP-messages-rate. The number of IGMP messages received by the DSLAM in one second. |
| G32 sheIgmpStatsPeakNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.12 | Gauge32 | read-only | Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate. |
| TIK sheIgmpStatsTimeOfPeakNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.13 | TimeTicks | read-only | Time and date of the peak of IGMP-messages-rate. |
| sheIgmpStatsBaseControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3 | |||
| SHE sheIgmpStatsBaseControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.1 | SheIgmpStatsBaseControlRequestType | read-write | Controlrequest for configuration. 741 - clearIgmpStatsBase |
| SHE sheIgmpStatsBaseControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.2 | SheIgmpStatsBaseControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command |
| U32 sheIgmpStatsBaseControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.3 | Unsigned32 | read-only | The time stamp of the last command (end of command) |
| SHE sheIgmpStatsBaseControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.4 | SheIgmpStatsBaseControlReqResultType | read-only | Result of the last command |
| sheIgmpStatsPortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4 | not-accessible | The table holds IGMP statistics port table in the NE. | |
| sheIgmpStatsPortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1 | not-accessible | The table entry shows the IGMP port statistics. | |
| C32 sheIgmpStatsPortNumberOfGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.1 | Counter32 | read-only | The Number of different ip multicast groups currently connected to end user |
| C32 sheIgmpStatsPortNumberOfQueryReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.2 | Counter32 | read-only | The Number of Igmp query message received from a subscriber port |
| C32 sheIgmpStatsPortNumberOfReportReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.3 | Counter32 | read-only | The Number of Igmp report message received from a subscriber port |
| C32 sheIgmpStatsPortNumberOfLeaveReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.4 | Counter32 | read-only | The Number of Igmp leave message received from a subscriber port |
| C32 sheIgmpStatsPortNumberOfInvalidReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.5 | Counter32 | read-only | The Number of invalid message received from a subscriber port |
| G32 sheIgmpStatsPortPeakNumberOfActiveGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.6 | Gauge32 | read-only | Number of active multicast group when the peak |
| TIK sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.7 | TimeTicks | read-only | Time and date of the peak of active multicast group |
| G32 sheIgmpStatsPortNumberOfDroppedByCA | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.8 | Gauge32 | read-only | Number of IGMP msg dropped by conditional access (if CPV failed or if max number of active m/c channels is exceeded). New parameter with SHE R2.8. |
| G32 sheIgmpStatsPortNumberOfDroppedByAC | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.9 | Gauge32 | read-only | Number of IGMP msg dropped by admission control (if max m/c bandwidth on a bport is exceeded or if max number of non-premium channels is exceeded). New parameter with SHE R2.8. |
| sheIgmpStatsPortControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5 | |||
| SHE sheIgmpStatsPortControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.1 | SheIgmpStatsPortControlRequestType | read-write | Controlrequest for configuration. 742 - clearIgmpStatsPort |
| SHE sheIgmpStatsPortControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.2 | SheIgmpStatsPortControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command |
| U32 sheIgmpStatsPortControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.3 | Unsigned32 | read-only | The time stamp of the last command (end of command) |
| SHE sheIgmpStatsPortControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.4 | SheIgmpStatsPortControlReqResultType | read-only | Result of the last command |
| U32 sheIgmpStatsPortControlBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.5 | Unsigned32 | read-write | Table index (A bridgePort-identifier) |
| sheIgmpStatsProviderTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6 | not-accessible | The table contains entries for statistics of igmp providers of DSLAM | |
| sheIgmpStatsProviderEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1 | not-accessible | The table entry shows the IGMP provider statistics. | |
| C32 sheIgmpStatsProviderNumberOfChannelsToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.1 | Counter32 | read-only | The Number of active multicast channels connections cross-connected by a provider |
| C32 sheIgmpStatsProviderNumberOfChannelsToHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.2 | Counter32 | read-only | The Number of different ip multicast channels currently connected to end users |
| C32 sheIgmpStatsProviderNumberOfQueryReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.3 | Counter32 | read-only | The Number of Igmp query message received by provider. |
| C32 sheIgmpStatsProviderNumberOfReportReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.4 | Counter32 | read-only | The Number of Igmp report message received by provider. |
| C32 sheIgmpStatsProviderNumberOfLeaveReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.5 | Counter32 | read-only | The Number of Igmp leave message received by provider. |
| C32 sheIgmpStatsProviderNumberOfInvalidReceived | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.6 | Counter32 | read-only | The Number of invalid message received by provider. |
| C32 sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.7 | Counter32 | read-only | The number of active multicast connections cross-connected by the provider per second when the peak. |
| TIK sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.8 | TimeTicks | read-only | Time and date of the peak of active multicast connections cross-connected by the provider. |
| C32 sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.9 | Counter32 | read-only | The number of different ip multicast channels currently connected to end users per second when the peak |
| TIK sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.10 | TimeTicks | read-only | Time and date of the peak of different ip multicast channels currently connected to end users |
| G32 sheIgmpStatsProviderNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.11 | Gauge32 | read-only | IGMP-messages-rate. The number of IGMP messages received by the provider in one second. |
| G32 sheIgmpStatsProviderPeakNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.12 | Gauge32 | read-only | Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate. |
| TIK sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.13 | TimeTicks | read-only | Time and date of the peak of IGMP-messages-rate. |
| sheIgmpStatsProviderControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7 | |||
| SHE sheIgmpStatsProviderControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.1 | SheIgmpStatsProviderControlRequestType | read-write | Controlrequest for configuration. 743 - clearIgmpStatsProvider: sheIgmpStatsProviderIndex |
| SHE sheIgmpStatsProviderControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.2 | SheIgmpStatsBaseControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command |
| U32 sheIgmpStatsProviderControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.3 | Unsigned32 | read-only | The time stamp of the last command (end of command) |
| SHE sheIgmpStatsProviderControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.4 | SheIgmpStatsBaseControlReqResultType | read-only | Result of the last command |
| U32 sheIgmpStatsProviderControlProviderIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.5 | Unsigned32 | read-write | A provider index. |
| sheIgmpFloodVlanTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18 | not-accessible | The table has one provider entry. It contains the provider VLAN and the host and querier settings. | |
| sheIgmpFloodVlanEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1 | not-accessible | In first release we will only support one table entry. | |
| INT sheIgmpFloodVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1.1 | INTEGER | read-only | A vlanid of which a packet has a destination address as reserved multicast should be flooded without processing. It is for igmp under L2VPN. |
| sheIgmpFloodVlanControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19 | |||
| SHE sheIgmpFloodVlanControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.1 | SheIgmpFloodVlanControlRequestType | read-write | createIgmpFloodVlan(743) sheIgmpFloodVlanControlVlanId deleteIgmpFloodVlan(744) sheIgmpFloodVlanControlVlanId |
| SHE sheIgmpFloodVlanControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpFloodVlanControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| G32 sheIgmpFloodVlanControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.4 | Gauge32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| SHE sheIgmpFloodVlanControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| INT sheIgmpFloodVlanControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.6 | INTEGER | read-write | Table index |
| sheIgmpSourceIpAddressTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.20 | not-accessible | New IGMPv3 configuration with SHE R2.8. | |
| sheIgmpSourceIpAddressEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1 | not-accessible | This is an unordered list of zero or more IP unicast addresses from which multicast reception is possible. An implementation MAY impose a limit on the size of source lists, but that limit MUST NOT be less than 64 addresses per list. When an operation causes the source list size limit to be exceeded, the service interface MUST return an error. | |
| U32 sheIgmpSourceIpIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1.1 | Unsigned32 | read-only | Table Index. A maximum number of 100 different addresses could be configured inside the NE. These index will be configured in sheIgmpGroupSourceList to select the valid source ip address per group (channel). A default configuration with IP 0.0.0.0 is always available and could not be changed or removed. Only valid for IGMPv3 configuration. New parameter with SHE R2.8. |
| OCT sheIgmpSourceIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1.2 | OCTET STRING | read-only | This is IP unicast addresses from which multicast reception is possible. If the source IP is 0.0.0.0, it should work as a '*' wildcard configuration (per default available). The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8. |
| sheIgmpSourceIpAddressControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21 | |||
| SHE sheIgmpSourceIpControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.1 | SheBridgeControlRequestType | read-write | createIgmpSourceIpAddressEntry: sheIgmpSourceIpControlAddress deleteIgmpSourceIpAddressEntry: sheIgmpSourceIpControlIndex |
| SHE sheIgmpSourceIpControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheIgmpSourceIpControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheIgmpSourceIpControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| G32 sheIgmpSourceIpControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.5 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| U32 sheIgmpSourceIpControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.6 | Unsigned32 | read-write | A table index used for delete an entry. |
| OCT sheIgmpSourceIpControlAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.7 | OCTET STRING | read-write | This is IP unicast addresses from which multicast reception is possible. The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8. |
| sheIgmpBridgePortConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22 | |||
| sheIgmpBridgePortProviderConfigTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1 | not-accessible | For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast provider Vlan a port has currently joined (second table index is sheIgmpProfileVlanVlanId). New supported with SHE R2.8! | |
| sheIgmpBridgePortProviderConfigEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1 | not-accessible | The MCast configuration settiongs per BridgePort. | |
| I32 sheIgmpBridgePortProviderVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.1 | Integer32 | read-only | MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8. |
| I32 sheIgmpBridgePortProviderTranslationVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.2 | Integer32 | read-only | Translation VLAN id for the bridge port. New parameter with SHE R2.8. |
| OCT sheIgmpBridgePortProviderAllowedVlanIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.3 | OCTET STRING | read-only | The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8. |
| U32 sheIgmpBridgePortProviderMcastRemainBandwith | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.4 | Unsigned32 | read-only | It is the bridge port remaining multicast bandwidth per provider. New parameter with SHE R2.8. |
| SHE sheIgmpBridgePortProviderMcastACStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.5 | SheIgmpProviderACStatus | read-only | It indicate the bridge port AC (admission control )status per provider. It can be accept or deny. When it is accepted, it indicates the provider still has enough bandwidth for multicast access. When it is denied, it indicates the provider is short of bandwidth for multicast access. 1 means accept, 0 means deny New parameter with SHE R2.8. |
| sheIgmpBridgePortProviderControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2 | |||
| SHE sheIgmpBridgePortProviderControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.1 | SheBridgeControlRequestType | read-write | createIgmpBridgePortProviderEntry(763): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList modifyIgmpBridgePortProviderEntry(764): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList deleteIgmpBridgePortProviderEntry(765): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId |
| I32 sheIgmpBridgePortProviderControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.2 | Integer32 | read-write | The index of the bridgePort to be configured. |
| SHE sheIgmpBridgePortProviderControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheIgmpBridgePortProviderControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheIgmpBridgePortProviderControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheIgmpBridgePortProviderControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheIgmpBridgePortProviderControlProviderVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.7 | Integer32 | read-write | MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8. |
| I32 sheIgmpBridgePortProviderControlTranslationVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.8 | Integer32 | read-write | Translation VLAN id for the bridge port. New parameter with SHE R2.8. |
| OCT sheIgmpBridgePortProviderControlAllowedVlanIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.9 | OCTET STRING | read-write | The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8. |
| sheIgmpBridgePortNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5 | |||
| NTF sheIgmpBridgePortProviderParameterCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.1 | send trap when bridgeport R2.8 igmp provider parameter was created. | ||
| NTF sheIgmpBridgePortProviderParameterModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.2 | send trap when bridgeport R2.8 igmp provider parameter was modified. | ||
| NTF sheIgmpBridgePortProviderParameterDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.3 | send trap when bridgeport R2.8 igmp provider parameter was deleted. | ||
| sheIgmpConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100 | |||
| sheIgmpCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.1 | |||
| sheIgmpCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.1.1 | Description. | ||
| sheIgmpGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2 | |||
| sheIgmpBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.1 | Description. | ||
| sheIgmpProfileGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.2 | Description. | ||
| sheIgmpProfileControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.3 | Description. | ||
| sheIgmpProfileVlanGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.4 | Description. | ||
| sheIgmpProfileVlanControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.5 | Description. | ||
| sheIgmpGroupGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.6 | Description. | ||
| sheIgmpGroupControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.7 | Description. | ||
| sheIgmpMcastGroupPackageGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.8 | Description. | ||
| sheIgmpMcastGroupPackageControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.9 | Description. | ||
| sheIgmpPortGroupsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.10 | Description. | ||
| sheIgmpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.11 | Description. | ||
| sheIgmpStatisticsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.12 | Description. | ||
| sheIgmpFloodVlanTableGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.13 | Description. | ||
| sheIgmpFloodVlanControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.14 | Description. | ||
| sheIgmpObsoleteGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.15 | Description. | ||
| sheIgmpObsoleteNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.16 | Description. | ||
| sheIgmpBridgePortGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.17 | Description. | ||
| sheIgmpBridgePortControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.18 | Description. | ||
| sheIgmpBridgePortNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.19 | Description. | ||
| sheQueueConfiguration | 1.3.6.1.4.1.231.7.1.2.2.1.4.8 | |||
| sheQueuePriorityTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1 | not-accessible | Configure the .1p prioritys of each queue for upstream and downstream direction. | |
| sheQueuePriorityEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1 | not-accessible | One entry for each priority. | |
| I32 sheQueuePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.1 | Integer32 | read-only | The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1. |
| I32 sheQueueNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.2 | Integer32 | read-only | That represents the Queue-Number. Only applicable for ingress queues on iu, because cxu_b will always use only one queue for traffic. |
| sheReducedQueuePriorityTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2 | not-accessible | There could a shrinking of queues on the iu in downstream direction (depending on the used IU type). So the available .1p-prioritys has to be mapped on a set of only four available queue-numbers. | |
| sheReducedQueuePriorityEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1 | not-accessible | One entry for each priority. | |
| I32 sheReducedQueuePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.1 | Integer32 | read-only | The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1. |
| I32 sheReducedQueueNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.2 | Integer32 | read-only | Number of the outgoing queue, where this priority is mapped on. |
| sheQueueControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3 | |||
| SHE sheQueueControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.1 | SheBridgeControlRequestType | read-write | modifyQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber modifyReducedQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber |
| I32 sheQueueControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.2 | Integer32 | read-write | The table-index to be modified. |
| SHE sheQueueControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheQueueControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheQueueControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheQueueControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheQueueControlQueueNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.7 | Integer32 | read-write | The range for this value depends on the used ControlRequest. In case of the Controlrequest is modifyReducedQueuePriorityMapping, the range is only 1..4! |
| sheQueueModeTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4 | not-accessible | Configure queue mode depending on the interfacetype. | |
| sheQueueModeEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1 | not-accessible | One entry for each interface type. | |
| NUM sheQueueModeInterfaceTypeIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.1 | SheBridgeInterfaceType | read-only | Describes the interface type, were this queue configuration should be used. uplink downlink cascading subcascading |
| SHE sheQueueConfigurationMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.2 | SheQueueModeType | read-only | Describes the queue mode, for this interface type. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's. |
| sheQueueModeControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5 | |||
| SHE sheQueueModeControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.1 | SheBridgeControlRequestType | read-write | modifyQueueModeEntry: sheQueueModeControlIndex sheQueueModeControlMode |
| I32 sheQueueModeControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.2 | Integer32 | read-write | The table index to be modified. |
| SHE sheQueueModeControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheQueueModeControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheQueueModeControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheQueueModeControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| SHE sheQueueModeControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.7 | SheQueueModeType | read-write | Set the queue mode. |
| sheQueueWeightTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6 | not-accessible | Configure weight's of queues for upstream direction. | |
| sheQueueWeightEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1 | not-accessible | One entry for each queue. | |
| U32 sheQueueIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.1 | Unsigned32 | read-only | A table index. This index represents the Queue-Number. |
| U32 sheQueueWeight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.2 | Unsigned32 | read-only | A weight value for queue if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| I32 sheQueueWeightWatermarkLow | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.3 | Integer32 | read-only | A low watermark value for a NE internal color aware queue handling. This value represents a % - Value of usage of the total Queue-Size. Default values: ------------------- Queue | Low | ------------------- 1 | 20 % | 2 | 20 % | 3 | 20 % | 4 | 20 % | 5 | 30 % | 6 | 30 % | 7 | 15 % | 8 | 15 % | |
| I32 sheQueueWeightWatermarkHigh | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.4 | Integer32 | read-only | A high watermark value for a NE internal color aware queue handling. High watermark defines additional the total used queue size as %-value of the theoretical possible queue size. Default Values: ------------ Queue | High ------------ 1 | 30 % 2 | 30 % 3 | 30 % 4 | 30 % 5 | 40 % 6 | 40 % 7 | 20 % 8 | 20 % |
| sheQueueWeightControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7 | |||
| SHE sheQueueWeightControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.1 | SheBridgeControlRequestType | read-write | modifyQueueWeightEntry: sheQueueWeightControlIndex sheQueueWeightControlWeight sheQueueWeightControlWatermarkLow sheQueueWeightControlWatermarkHigh |
| I32 sheQueueWeightControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.2 | Integer32 | read-write | The table-entry to be modified. |
| SHE sheQueueWeightControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheQueueWeightControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheQueueWeightControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheQueueWeightControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheQueueWeightControlWeight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.7 | Unsigned32 | read-write | Look at weight-table description. |
| U32 sheQueueWeightControlWatermarkLow | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.8 | Unsigned32 | read-write | Not needed for configuration in current scenario. This value represents a % - Value of usage of the total Queue-Size. |
| U32 sheQueueWeightControlWatermarkHigh | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.9 | Unsigned32 | read-write | Not needed for configuration in current scenario.This value represents a % - Value of usage of the total Queue-Size. |
| sheQueueNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9 | |||
| NTF sheQueuePriorityMappingModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.1 | Configuration notification for priority mapping table. | ||
| NTF sheReducedQueuePriorityMappingModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.2 | Configuration notification for shrink mapping table. | ||
| NTF sheQueueModeEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.3 | Configuration notification for queue mode table. | ||
| NTF sheQueueWeightEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.4 | Configuration notification for queue weight table. | ||
| NTF sheCardQueueEntryConfigured | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.5 | Configure the queue handling for a card. | ||
| NTF sheCardQueueEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.6 | Delete the queue handling for a card. | ||
| NTF sheCardQueueEntryConfigResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.7 | Result trap for long running command to configure the queue handling for a card. | ||
| sheCardQueueConfigurationTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10 | not-accessible | Configure the queue handling individuell per configured card. This will replace the general queue configuration settings. Per default, no indivudell settings are made and this table is empty (could be change during development). NEW supported with R2.8! | |
| sheCardQueueConfigurationEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1 | not-accessible | One entry for each card, if these card should not use the global NE queue configuration parameters. If a card type will never uses the global NE parameters, a entry for this card will be automatically created during card creation process. This table uses two indices: First index is the entPhysicalIndex from entPhysicalTable for the card. Second index is sheCardQueueInterfaceTypeIndex from this table. | |
| NUM sheCardQueueInterfaceTypeIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.1 | SheBridgeInterfaceType | read-only | Describes the interface type, were this queue configuration should be used. Valid values for this configuration's are: uplink(1) -> for central board means uplink, for IU means interlink to cxu downlink(2) -> for central board means interlink to IU's, for IU means subcriber |
| SHE sheCardQueueSchedulingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.10 | SheQueueModeType | read-only | Describes the queue scheduling mode. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's. |
| U32 sheCardQueue1Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.11 | Unsigned32 | read-only | A weight value for queue 1 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue1Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.12 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 1. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue2Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.13 | Unsigned32 | read-only | A weight value for queue 2 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue2Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.14 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 2. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue3Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.15 | Unsigned32 | read-only | A weight value for queue 3 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue3Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.16 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 3. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue4Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.17 | Unsigned32 | read-only | A weight value for queue 4 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue4Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.18 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 4. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue5Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.19 | Unsigned32 | read-only | A weight value for queue 5 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue5Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.20 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 5. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue6Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.21 | Unsigned32 | read-only | A weight value for queue 6 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue6Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.22 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 6. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue7Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.23 | Unsigned32 | read-only | A weight value for queue 7 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue7Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.24 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 7. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| U32 sheCardQueue8Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.25 | Unsigned32 | read-only | A weight value for queue 8 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again. |
| U32 sheCardQueue8Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.26 | Unsigned32 | read-only | A watermark configuration for a NE internal colour aware queue handling for queue number 8. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. |
| SHE sheCardQueueColourAwareTCSource | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.27 | SheQueueColourAwareType | read-only | Configure, how the current traffic class of a frame should detected. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for R3.5! |
| SHE sheCardQueueColourMarking | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.28 | SheQueueColourAwareType | read-only | Configure, if and how the current colour should be marked. Colour marking will only work in upstream direction. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for 3.5! |
| SHE sheCardQueueDiscardPolicy | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.29 | SheQueueDiscardPolicyType | read-only | Describes the policy in case of frame discards. Possible values: tailDrop(1), wRed(2) Configuration will be currently ignored! Starting support planed for R3.5! |
| SHE sheCardQueueMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.30 | SheCardQueueModeType | read-only | This parameter describe the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8. |
| U32 sheCardQueueHqsSecondStageInputQueue | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.31 | Unsigned32 | read-only | This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 5-8) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8. |
| U32 sheCardQueueHqsFirstStagePir | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.32 | Unsigned32 | read-only | This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8. |
| U32 sheCardQueueHqsFirstStagePbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.33 | Unsigned32 | read-only | This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8. |
| sheCardQueueConfigurationControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11 | |||
| SHE sheCardQueueControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.1 | SheBridgeControlRequestType | read-write | configureCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex ... deleteCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex |
| PHY sheCardQueueControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2 | PhysicalIndex | read-write | The first index (entPhysicalIndex of card) to identify the table-entry to be configured. |
| SHE sheCardQueueControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheCardQueueControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheCardQueueControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheCardQueueControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| NUM sheCardQueueControlInterfaceTypeIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.7 | SheBridgeInterfaceType | read-write | The second index to identify the table-entry to be configured. |
| SHE sheCardQueueControlSchedulingMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.16 | SheQueueModeType | read-write | Set the queue scheduling mode. |
| U32 sheCardQueueControlQueue1Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.17 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue1Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.18 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue2Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.19 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue2Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.20 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue3Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.21 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue3Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.22 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue4Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.23 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue4Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.24 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue5Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.25 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue5Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.26 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue6Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.27 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue6Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.28 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue7Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.29 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue7Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.30 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue8Weight | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.31 | Unsigned32 | read-write | Look at table description. |
| U32 sheCardQueueControlQueue8Watermarks | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.32 | Unsigned32 | read-write | Look at table description. |
| SHE sheCardQueueControlColourAwareTCSource | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.33 | SheQueueColourAwareType | read-write | Look at table description. |
| SHE sheCardQueueControlColourMarking | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.34 | SheQueueColourAwareType | read-write | Look at table description. |
| SHE sheCardQueueControlDiscardPolicy | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.35 | SheQueueDiscardPolicyType | read-write | Look at table description. |
| SHE sheCardQueueControlMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.36 | SheCardQueueModeType | read-write | This parameter set the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8. |
| U32 sheCardQueueControlHqsSecondStageInputQueue | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.37 | Unsigned32 | read-write | This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 1-4) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8. |
| U32 sheCardQueueControlHqsFirstStagePir | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.38 | Unsigned32 | read-write | This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8. |
| U32 sheCardQueueControlHqsFirstStagePbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.39 | Unsigned32 | read-write | This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8. |
| sheShapingProfileTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12 | not-accessible | The shaping profile table. | |
| sheShapingProfileEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1 | not-accessible | One entry for each shaping profile. Selection of the used profile will be done via ShapingProfileAssignmentTable. | |
| U32 sheShapingProfileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.1 | Unsigned32 | read-only | A profile-table index. |
| OCT sheShapingProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.2 | OCTET STRING | read-only | A descriptional name for this Shaping profile. Spaces and other special characters (: ?) are not allowed!! |
| I32 sheShapingProfileCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.3 | Integer32 | read-only | The Committed Information Rate for downstream shaping. |
| I32 sheShapingProfileCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.4 | Integer32 | read-only | The Committed Burst Size for downstream shaping. |
| sheShapingProfileControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13 | |||
| SHE sheShapingProfileControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.1 | SheBridgeControlRequestType | read-write | createShapingProfile: sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs deleteShapingProfile: sheShapingProfileControlIndex modifyShapingProfile: sheShapingProfileControlIndex sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs |
| U32 sheShapingProfileControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.2 | Unsigned32 | read-write | Index of the configured table entry. Needed for modify or delete. |
| SHE sheShapingProfileControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheShapingProfileControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheShapingProfileControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheShapingProfileControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| OCT sheShapingProfileControlProfileName | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.7 | OCTET STRING | read-write | look at ShapingProfileTable... Spaces and other special characters (: ?) are not allowed!! |
| I32 sheShapingProfileControlProfileCir | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.8 | Integer32 | read-write | look at ShapingProfileTable... |
| I32 sheShapingProfileControlProfileCbs | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.9 | Integer32 | read-write | look at ShapingProfileTable... |
| sheShapingProfileAssignmentTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14 | not-accessible | The shaping profile assignment table. | |
| sheShapingProfileAssignmentEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1 | not-accessible | One entry for each assigned shaping profile. The assignment will use two indeces. First index is the ifIndex of the used subscriber port. Second index is the queue number. New with R2.8: There are two special values for queuenumber are supported, which allow to assign such a shaping profile to the lower (1..4) or upper (5..8) queue-group. If mode4QueueFlat is running, only the lower group is available. One shaping profile for all queues in queuemode mode8QueueFlat or modeHqs is not supported. | |
| U32 sheShapingProfileAssignmentQueueNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.1 | Unsigned32 | read-only | The second index of this table. That represents the used Queue-Number for this ShapingProfile assignment. Note: Depending on the used card type, the number of available queues could be restricted to 4. An assignment to 8 queues will always be possible and the IU will then ignore the upper 4 queue configurations. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'. |
| U32 sheShapingProfileAssignmentProfileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.2 | Unsigned32 | read-only | This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number. |
| sheShapingProfileAssignmentControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15 | |||
| SHE sheShapingProfileAssignmentControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.1 | SheBridgeControlRequestType | read-write | assignShapingProfile: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber sheShapingProfileAssignmentControlProfileIndex deleteShapingProfileAssignment: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber |
| NUM sheShapingProfileAssignmentControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.2 | InterfaceIndex | read-write | ifIndex of the DSL-Interface where a shaping profile should be assigned. First index value for assignment. |
| SHE sheShapingProfileAssignmentControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.3 | SheControlStatusType | read-only | The status of a user command. |
| G32 sheShapingProfileAssignmentControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheShapingProfileAssignmentControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheShapingProfileAssignmentControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| U32 sheShapingProfileAssignmentControlQueueNumber | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.7 | Unsigned32 | read-write | QueueNumber of the DSL-Interface where a shaping profile should be assigned. Second index value for assignment. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'. |
| U32 sheShapingProfileAssignmentControlProfileIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.8 | Unsigned32 | read-write | This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number. |
| sheShapingNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16 | |||
| NTF sheShapingProfileCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.2 | Configuration notification. A new shaping profile was created in sheShapingProfileTable. | ||
| NTF sheShapingProfileModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.3 | Configuration notification. A shaping profile was modified in sheShapingProfileTable. | ||
| NTF sheShapingProfileDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.4 | Configuration notification. A shaping profile was deleted from sheShapingProfileTable. | ||
| NTF sheShapingProfileAssigned | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.5 | Configuration notification. A shaping profile from sheShapingProfileTable was assigned to port.queuenumber. | ||
| NTF sheShapingProfileAssignmentDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.6 | Configuration notification. An existing shaping profile assignment was deleted from sheShapingProfileAssignmentTable. | ||
| sheQueueConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100 | |||
| sheQueueCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.1 | |||
| sheQueueCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.1.1 | Description. | ||
| sheQueueGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2 | |||
| sheQueuePriorityGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.1 | Description. | ||
| sheQueuePriorityControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.3 | Description. | ||
| sheQueueModeGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.4 | Description. | ||
| sheQueueModeControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.5 | Description. | ||
| sheQueueWeightGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.6 | Description. | ||
| sheQueueWeightControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.7 | Description. | ||
| sheQueueCardGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.8 | Description. | ||
| sheQueueCardControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.9 | Description. | ||
| sheQueueNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.10 | Description. | ||
| sheShapingGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.11 | Description. | ||
| sheShapingControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.12 | Description. | ||
| sheShapingNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.13 | Description. | ||
| sheErp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9 | |||
| sheErpBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1 | |||
| sheErpBaseParam | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1 | |||
| OCT sheErpDomainTrafficVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1.1 | OCTET STRING | read-only | This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN. |
| sheErpBaseControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2 | |||
| SHE sheErpBaseControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. - modifyErpDomainTrafficVlan parameters: sheErpBaseControlDomainTrafficVlan |
| SHE sheErpBaseControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheErpBaseControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheErpBaseControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheErpBaseControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| OCT sheErpBaseControlDomainTrafficVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.6 | OCTET STRING | read-write | This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN. parameter for - modifyErpDomainTrafficVlan |
| sheErpDomain | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2 | |||
| sheErpDomainTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1 | not-accessible | ERP domains configuration table with static entries. | |
| sheErpDomainEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1 | not-accessible | ERP Domain entry. | |
| U32 sheErpDomainIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.1 | Unsigned32 | read-only | An index value that uniquely identifies an ERP domain. |
| STR sheErpDomainName | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.2 | DisplayString | read-only | The associated name of the ERP Domain. Spaces and other special characters (: ?) are not allowed!! |
| SHE sheErpDomainPrimaryPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.3 | SheBridgePortIndexOrInvalid | read-only | The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). |
| SHE sheErpDomainSecondaryPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.4 | SheBridgePortIndexOrInvalid | read-only | The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). |
| U32 sheErpDomainWaitToRestoreTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.5 | Unsigned32 | read-only | Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. Range 2..720. |
| U32 sheErpDomainTestPacketInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.6 | Unsigned32 | read-only | Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps. |
| U32 sheErpDomainLearningDisabledTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.7 | Unsigned32 | read-only | Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms. |
| SHE sheErpDomainProtectionActivation | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.8 | ShePermissionType | read-only | Represents if ERP Protection activation is activated or deactivated (admin state). When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active |
| SHE sheErpDomainOperatorRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.9 | SheErpDomainOperatorRequestType | read-only | Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port. |
| SHE sheErpDomainNodeMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.10 | SheErpNodeType | read-only | An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2) |
| SHE sheErpDomainControlVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.11 | SheVlanIdOrInvalid | read-only | Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile. |
| SHE sheErpDomainNodeStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.12 | SheErpDomainNodeStatusType | read-only | Reflects the domain node status. rmIdle(1) primaryProtecting(2) protecting(3) idle(4) failed-S(5) failed-P(6) preForward(7) isolated(8) deactivated(9) backoff(10) |
| SHE sheErpDomainRingStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.13 | SheErpDomainRingStatusType | read-only | Actual protection state of the ERP domain on the ring. The following three states are defined: Normal - All ring nodes are available and used. Protecting - At least one Link on the ring is failed. Unknown - This state is used when the ERP protection is not activated, or when the Multiple Failures are detected in a Normal Node. |
| T/F sheErpDomainLotp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.14 | TruthValue | read-only | Erp domain Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive |
| T/F sheErpDomainUlotp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.15 | TruthValue | read-only | Erp domain Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive |
| T/F sheErpDomainMultipleRm | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.16 | TruthValue | read-only | Erp domain Multiple Redundancy Manager alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive |
| T/F sheErpDomainRmReach | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.17 | TruthValue | read-only | RM Node reacheability alarm status. Erp domain detection of mutiple failures in the ring cause the RM Node to become unreacheable to this normal node (only meaningful for normal nodes). true(1) - RM Node is unreacheable, alarm active false(2) - RM Node is reacheable, alarm inactive |
| SHE sheErpDomainLotpTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.18 | ShePermissionType | read-only | Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1) |
| SHE sheErpDomainUlotpTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.19 | ShePermissionType | read-only | Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1) |
| SHE sheErpDomainMultipleRmTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.20 | ShePermissionType | read-only | Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1) |
| SHE sheErpDomainRmReachTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.21 | ShePermissionType | read-only | Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) |
| SHE sheErpDomainAlarmSeverityIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.22 | SheAlarmSevProfileIndex | read-only | Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain. |
| sheErpDomainControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2 | |||
| SHE sheErpDomainControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainEntry(826) parameters: - sheErpDomainControlDomainIndex - sheErpDomainControlDomainName - sheErpDomainControlDomainPrimaryPort - sheErpDomainControlDomainSecondaryPort - sheErpDomainControlWaitToRestoreTime - sheErpDomainControlTestPacketInterval - sheErpDomainControlLearningDisabledTime - sheErpDomainControlDomainNodeMode - sheErpDomainControlDomainControlVlan - sheErpDomainControlLotpTrapEnable - sheErpDomainControlUlotpTrapEnable - sheErpDomainControlMultipleRmTrapEnable - sheErpDomainControlRmReachTrapEnable - sheErpDomainControlAlarmSeverityIndex activateErpDomain(827) - sheErpDomainControlDomainIndex - sheErpDomainControlProtectionActivation operatorRequestErpDomain(828) - sheErpDomainControlDomainIndex - sheErpDomainControlOperatorRequest |
| SHE sheErpDomainControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheErpDomainControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheErpDomainControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheErpDomainControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| U32 sheErpDomainControlDomainIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.6 | Unsigned32 | read-write | An index value that uniquely identifies an ERP domain. parameter for - modifyErpDomainEntry - modifyErpDomainTraps - activateErpDomain - operatorRequestErpDomain |
| STR sheErpDomainControlDomainName | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.7 | DisplayString | read-write | The associated name of the ERP Domain. Spaces and other special characters (: ?) are not allowed!! parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlDomainPrimaryPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.8 | SheBridgePortIndexOrInvalid | read-write | The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlDomainSecondaryPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.9 | SheBridgePortIndexOrInvalid | read-write | The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry |
| U32 sheErpDomainControlWaitToRestoreTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.10 | Unsigned32 | read-write | Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. parameter for - modifyErpDomainEntry |
| U32 sheErpDomainControlTestPacketInterval | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.11 | Unsigned32 | read-write | Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps. parameter for - modifyErpDomainEntry |
| U32 sheErpDomainControlLearningDisabledTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.12 | Unsigned32 | read-write | Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms. parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlProtectionActivation | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.13 | ShePermissionType | read-write | Represents if ERP Protection activation is activated or deactivated. When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active parameter for - activateErpDomain |
| SHE sheErpDomainControlOperatorRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.14 | SheErpDomainOperatorRequestType | read-write | Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port. parameter for - operatorRequestErpDomain |
| SHE sheErpDomainControlDomainNodeMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.15 | SheErpNodeType | read-write | An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2) parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlDomainControlVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.16 | SheVlanIdOrInvalid | read-write | Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile. parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlLotpTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.17 | ShePermissionType | read-write | Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlUlotpTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.18 | ShePermissionType | read-write | Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlMultipleRmTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.19 | ShePermissionType | read-write | Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlRmReachTrapEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.20 | ShePermissionType | read-write | Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) parameter for - modifyErpDomainEntry |
| SHE sheErpDomainControlAlarmSeverityIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.21 | SheAlarmSevProfileIndex | read-write | Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain. parameter for - modifyErpDomainEntry |
| sheErpDomainGlobalGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3 | |||
| SHE sheErpDomainGlobalMacLearningDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3.1 | SheEnableType | read-only | Enable / disable the MAC learning delay globaly. Default: disable When this parameter is set to enable, ERP enhancement solution will be actived. ERP module will apply hardware MAC learning after FDB flush. if this parameter is set to disable, ERP module will work the same as before. |
| U32 sheErpDomainGlobalMacLearningDelayTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3.2 | Unsigned32 | read-only | Configure the MAC learning delay time. Value range: 10~to be defined, the increasement granularity is 10 ms default: to be defined. This parameter specify how long the hardware MAC learning will last in condition that sheErpDomainMacLearningDelay is enabled. |
| sheErpDomainGlobalControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4 | |||
| SHE sheErpDomainGlobalControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainGlobalGroup(829) parameters: sheErpDomainGlobalMacLearningDelay sheErpDomainGolobalMacLearningDelayTimer |
| SHE sheErpDomainGlobalControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheErpDomainGlobalControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheErpDomainGlobalControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheErpDomainGlobalControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| SHE sheErpDomainGlobalControlMacLearningDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.6 | SheEnableType | read-write | Enable / disable the MAC learning delay globaly. |
| U32 sheErpDomainGlobalControlMacLearningDelayTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.7 | Unsigned32 | read-write | Configure the MAC learning delay time. |
| sheErpNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3 | |||
| sheErpEvents | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1 | |||
| NTF sheErpDomainRingStatusChange | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.1 | This trap is set whenever there is a change in the erpDomainRingStatus. | ||
| NTF sheErpDomainNodeStatusChange | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.2 | This trap is set whenever there is a change in the erpDomainNodeStatus. | ||
| NTF sheErpDomainTrafficVlanModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.3 | Mapping of ERP domains to traffic VLANs modified. | ||
| NTF sheErpDomainEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.4 | ERP domain entry modified. | ||
| NTF sheErpDomainProtectionModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.5 | The ERP domain activation has been modified by the operator. | ||
| NTF sheErpDomainManualSwitch | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.6 | The ERP domain RM node port swap has been modified by the operator. | ||
| NTF sheErpDomainGlobalGroupModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.7 | Modify global parameters of ERP domain. | ||
| sheErpAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2 | |||
| NTF sheErpDomainLotpAlmTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.1 | Loss of TestPackets state change trap. | ||
| NTF sheErpDomainUlotpAlmTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.2 | Unidirectional Loss of TestPackets state change trap. | ||
| NTF sheErpDomainMultipleRmAlmTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.3 | Multiple RM state change trap. | ||
| NTF sheErpDomainRmReachAlmTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.4 | Rm Node Unreacheable state change trap. | ||
| sheErpConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100 | |||
| sheErpCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.1 | |||
| sheErpCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.1.1 | Description. | ||
| sheErpGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2 | |||
| sheErpBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.1 | Description. | ||
| sheErpBaseControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.2 | Description. | ||
| sheErpDomainGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.3 | Description. | ||
| sheErpDomainControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.4 | Description. | ||
| sheErpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.5 | Description. | ||
| sheBcsc | 1.3.6.1.4.1.231.7.1.2.2.1.4.10 | |||
| sheBcscTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1 | not-accessible | This table has one entry for each combination of port or vlan and traffic type where broadcast storm control has to be performed. | |
| sheBcscEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1 | not-accessible | Specifies per port or vlan and per traffic type the broadcast storm control parameters, i.e. how many packets/bits per second can be received. | |
| U32 sheBcscIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.1 | Unsigned32 | read-only | Primary key for the table. |
| SHE sheBcscType | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.2 | SheBcscTrafficType | read-only | Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast) |
| SHE sheBcscConfigScope | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.3 | SheBcscScopeType | read-only | Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan |
| U32 sheBcscConfigIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.4 | Unsigned32 | read-only | Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093. |
| SHE sheBcscThresholdType | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.5 | SheBcscThresholdType | read-only | Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second |
| U32 sheBcscThresholdValue | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.6 | Unsigned32 | read-only | Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period. |
| OCT sheBcscVendorSpecific | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.7 | OCTET STRING | read-only | For some vendors, multicast address can be specified. |
| U32 sheBcscAlarmDebounceTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.8 | Unsigned32 | read-only | The minimum time between two alarm traps sent by the BSCS instance. |
| SHE sheBcscAlarmSeverityIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.9 | SheAlarmSevProfileIndex | read-only | Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance. |
| sheBcscControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2 | |||
| SHE sheBcscControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. 501 - createBcscEntry parameters: sheBcscControlType sheBcscControlConfigScope sheBcscControlConfigIndex sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 502 - modifyBcscEntry parameters: sheBcscControlIndex sheBcscControlType sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 503 - deleteBcscEntry parameters: sheBcscControlIndex |
| SHE sheBcscControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheBcscControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheBcscControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheBcscControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| U32 sheBcscControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.6 | Unsigned32 | read-write | Primary key for the table, created by the NE. Parameter for 502 - modifyBcscEntry 503 - deleteBcscEntry |
| SHE sheBcscControlType | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.7 | SheBcscTrafficType | read-write | Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast) Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| SHE sheBcscControlConfigScope | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.8 | SheBcscScopeType | read-write | Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan Parameter for 501 - createBcscEntry |
| U32 sheBcscControlConfigIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.9 | Unsigned32 | read-write | Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093. Parameter for 501 - createBcscEntry |
| SHE sheBcscControlThresholdType | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.10 | SheBcscThresholdType | read-write | Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| U32 sheBcscControlThresholdValue | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.11 | Unsigned32 | read-write | Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| OCT sheBcscControlVendorSpecific | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.12 | OCTET STRING | read-write | For some vendors, multicast address can be specified. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| I32 sheBcscControlAlarmDebounceTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.13 | Integer32 | read-write | The minimum time between two alarm traps sent by the BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| I32 sheBcscControlAlarmSeverityIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.14 | Integer32 | read-write | Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry |
| sheBcscNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3 | |||
| sheBcscEvents | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1 | |||
| NTF sheBcscEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.1 | New entry in the sheBcscTable has been created. | ||
| NTF sheBcscEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.2 | Existing entry in the sheBcscTable has been modified. | ||
| NTF sheBcscEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.3 | Entry in the sheBcscTable has been deleted. | ||
| sheBcscAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2 | |||
| NTF sheBcscThresholdExceeded | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2.1 | Maximum traffic amount has reached threshold within the 1 second measuring interval, further traffic of that type is dropped during the next time period. | ||
| sheBcscConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100 | |||
| sheBcscCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.1 | |||
| sheBcscCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.1.1 | Description. | ||
| sheBcscGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2 | |||
| sheBcscGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.1 | Description. | ||
| sheBcscControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.2 | Description. | ||
| sheBcscNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.3 | Description. | ||
| sheMstpConfig | 1.3.6.1.4.1.231.7.1.2.2.1.4.11 | |||
| sheMstpBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1 | |||
| sheMstpBaseParam | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1 | |||
| T/F sheMstpBaseStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.1 | TruthValue | read-only | Enable or disable spanning tree. |
| OCT sheMstpBaseConfName | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.2 | OCTET STRING | read-only | The MST configuration determines to which MST region Spaces and other special characters (: ?) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. |
| U32 sheMstpBaseRevisionLevel | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.3 | Unsigned32 | read-only | The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535. |
| OCT sheMstpBaseConfIdVlanIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.4 | OCTET STRING | read-only | The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. |
| sheMstpBaseControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2 | |||
| SHE sheMstpBaseControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. - modifyMstpBaseStatus parameters: sheMstpBaseControlBaseStatus - modifyMstpBaseConfig parameters: sheMstpBaseControlConfName sheMstpBaseControlRevisionLevel - modifyMstpBaseConfIdVlanIdList parameters: sheMstpBaseControlConfIdVlanIdList |
| SHE sheMstpBaseControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheMstpBaseControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheMstpBaseControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheMstpBaseControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| T/F sheMstpBaseControlBaseStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.6 | TruthValue | read-write | Enable or disable spanning tree. parameter of - modifyMstpBaseStatus |
| OCT sheMstpBaseControlConfName | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.7 | OCTET STRING | read-write | The MST configuration determines to which MST region Spaces and other special characters (: ?) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. parameter of - modifyMstpBaseConfig |
| U32 sheMstpBaseControlRevisionLevel | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.8 | Unsigned32 | read-write | The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535. parameter of - modifyMstpBaseConfig |
| OCT sheMstpBaseControlConfIdVlanIdList | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.9 | OCTET STRING | read-write | The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. parameter of - modifyMstpBaseConfIdVlanIdList |
| sheMstp | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2 | |||
| sheMstpBridgeProtoParamTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1 | not-accessible | One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. | |
| sheMstpBridgeProtoParamEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1 | not-accessible | One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. Note that each MST region can only support up to 16 spanning-tree instances. | |
| U32 sheMstpBridgeProtoParamIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.1 | Unsigned32 | read-only | The primary key for the table. One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. |
| OCT sheMstpBridgeProtoParamBridgeId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.2 | OCTET STRING | read-only | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. |
| U32 sheMstpBridgeProtoParamBridgePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.3 | Unsigned32 | read-only | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. The configured value for the MstpBridgeProtoParamPriority should be completed by a fixed offsett, depending on the Mstp-Instance ID. That means, a configured priority-value of 4097 is valid for Mstp instance 1. Instance 2 will use 4098 in that case and instance 32 will have a MstpBridgeProtoParamPriority of 4128. Default value should be 32769 for MSTP-Instance 1 and 32800 for instance 32. |
| TIK sheMstpBridgeProtoParamTcTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.4 | TimeTicks | read-only | The time since the last topology change. |
| C32 sheMstpBridgeProtoParamTcCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.5 | Counter32 | read-only | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| T/F sheMstpBridgeProtoParamTc | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.6 | TruthValue | read-only | A topology change has been detected. |
| OCT sheMstpBridgeProtoParamDesignatedRoot | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.7 | OCTET STRING | read-only | One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| U32 sheMstpBridgeProtoParamRootPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.8 | Unsigned32 | read-only | A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex. |
| U32 sheMstpBridgeProtoParamRootPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.9 | Unsigned32 | read-only | The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch. |
| sheMstpPortParamTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2 | not-accessible | The table holds the MSTP parameters on a per-port basis. The first key is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). The second key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. | |
| sheMstpPortParamEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1 | not-accessible | The table holds the MSTP parameters on a per-port basis. A free running index is used as key. There is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). There is a seconde pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. | |
| U32 sheMstpPortParamTableIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.1 | Unsigned32 | read-only | A free running simple table index. |
| U32 sheMstpPortParamProtoIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.2 | Unsigned32 | read-only | The MSTP profile, the table entry is related to, is the first key of the table. This object points to the sheMstpBridgeProtoParamTable (same as sheMstpBridgeProtoParamIndex). |
| U32 sheMstpPortParamPortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.3 | Unsigned32 | read-only | The port, the table entry is related to, is the second key of the table. This object points to the sheBridgePortTable (same as sheBridgePortIndex). |
| TIK sheMstpPortParamUpTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.4 | TimeTicks | read-only | The total time the port was in the forwarding state since the management entity was last reset or initialized. |
| SHE sheMstpPortParamState | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.5 | SheMstpPortParamStateType | read-only | Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port. |
| OCT sheMstpPortParamPortId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.6 | OCTET STRING | read-only | The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management. |
| U32 sheMstpPortParamPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.7 | Unsigned32 | read-only | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. |
| U32 sheMstpPortParamAdminPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.8 | Unsigned32 | read-only | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. |
| OCT sheMstpPortParamDesignatedRoot | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.9 | OCTET STRING | read-only | One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| OCT sheMstpPortParamDesignatedBridge | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.10 | OCTET STRING | read-only | A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. |
| OCT sheMstpPortParamDesignatedPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.11 | OCTET STRING | read-only | The port identifier of the port that transmitted a BPDU to me. |
| U32 sheMstpPortParamDesignatedCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.12 | Unsigned32 | read-only | A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch. |
| SHE sheMstpPortParamPortRole | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.13 | SheMstpPortParamPortRoleType | read-only | The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology. |
| U32 sheMstpPortParamCurrentPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.14 | Unsigned32 | read-only | These value represent the current pathcost value for this port. |
| sheMstpControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3 | |||
| SHE sheMstpControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. sheMstpBridgeProtoParamTable - resetMstpTc parameters: sheMstpControlBridgeProtoParamIndex - modifyMstpBridgeParamEntry parameters: sheMstpControlBridgeProtoParamIndex sheMstpControlBridgeProtoParamBridgePriority sheMstpPortParamTable - modifyMstpPortParamEntry parameters: sheMstpControlPortParamTableIndex sheMstpControlPortParamPortPriority sheMstpControlPortParamAdminPathCost |
| SHE sheMstpControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheMstpControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheMstpControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheMstpControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| U32 sheMstpControlBridgeProtoParamIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.6 | Unsigned32 | read-write | Selects a table entry that holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. Parameter for - resetMstpTc - modifyMstpBridgeParamEntry |
| U32 sheMstpControlBridgeProtoParamBridgePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.7 | Unsigned32 | read-write | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. Parameter for - modifyMstpBridgeParamEntry |
| U32 sheMstpControlPortParamTableIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.8 | Unsigned32 | read-write | A free running simple table index. |
| U32 sheMstpControlPortParamPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.9 | Unsigned32 | read-write | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyMstpPortParamEntry |
| U32 sheMstpControlPortParamAdminPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.10 | Unsigned32 | read-write | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyMstpPortParamEntry |
| sheCist | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3 | |||
| sheCistBridgeProtoParam | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1 | |||
| OCT sheCistBridgeProtoParamBridgeId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.1 | OCTET STRING | read-only | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. |
| U32 sheCistBridgeProtoParamBridgePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.2 | Unsigned32 | read-only | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. |
| TIK sheCistBridgeProtoParamTcTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.3 | TimeTicks | read-only | The time since the last topology change. |
| C32 sheCistBridgeProtoParamTcCount | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.4 | Counter32 | read-only | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| T/F sheCistBridgeProtoParamTc | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.5 | TruthValue | read-only | A topology change has been detected. |
| OCT sheCistBridgeProtoParamDesignatedRoot | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.6 | OCTET STRING | read-only | One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| U32 sheCistBridgeProtoParamRootPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.7 | Unsigned32 | read-only | A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex. |
| U32 sheCistBridgeProtoParamRootPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.8 | Unsigned32 | read-only | The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch. |
| U32 sheCistBridgeProtoParamMaxAge | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.9 | Unsigned32 | read-only | The maximum age of spanning tree protocol information learned from the network on any port before it is discarded (time a bridge port saves its configuration BPDU information), in units of hundredths of a second. This is the actual value that this bridge is currently using. This is 20 seconds by default and can be tuned to be between six and 40 seconds. |
| U32 sheCistBridgeProtoParamHoldTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.10 | Unsigned32 | read-only | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
| U32 sheCistBridgeProtoParamForwardDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.11 | Unsigned32 | read-only | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds. |
| U32 sheCistBridgeProtoParamBridgeMaxAge | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.12 | Unsigned32 | read-only | The value that all bridges use for MaxAge when this bridge is acting as the root in units of hundredths of a second. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
| U32 sheCistBridgeProtoParamBridgeHelloTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.13 | Unsigned32 | read-only | The value that all bridges use for HelloTime when this bridge is acting as the root in units of hundredths of a second. The hello time is the time between each Bridge Protocol Data Unit (BPDU) that is sent on a port. This is equal to two seconds by default, but can be tuned to be between one and ten seconds. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
| U32 sheCistBridgeProtoParamBridgeForwardDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.14 | Unsigned32 | read-only | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of BridgeMaxAge. This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds. |
| SHE sheCistBridgeProtoParamForceVer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.15 | SheCistBridgeProtoParamForceVerType | read-only | When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation) or 3 (MSTP Compatibility). |
| OCT sheCistBridgeProtoParamRegionalRootId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.16 | OCTET STRING | read-only | One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| U32 sheCistBridgeProtoParamRegionalRootPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.17 | Unsigned32 | read-only | The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch. |
| I32 sheCistBridgeProtoParamMaxHops | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.18 | Integer32 | read-only | Number of possible hops in the region. Only used if forcedVersion = mstp(3). |
| T/F sheCistBridgeProtoParamSelfLoopDetect | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.19 | TruthValue | read-only | Enable/Disable the stp self loop detection. |
| sheCistPortParamTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3 | not-accessible | The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. | |
| sheCistPortParamEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1 | not-accessible | The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. | |
| U32 sheCistPortParamIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.1 | Unsigned32 | read-only | That is the sheBridgePortIndex of the corresponding BridgePort. |
| TIK sheCistPortParamUpTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.2 | TimeTicks | read-only | The total time the port was in the forwarding state since the management entity was last reset or initialized. |
| SHE sheCistPortParamState | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.3 | SheMstpPortParamStateType | read-only | Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port. |
| OCT sheCistPortParamPortId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.4 | OCTET STRING | read-only | The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management. |
| U32 sheCistPortParamPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.5 | Unsigned32 | read-only | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. |
| U32 sheCistPortParamAdminPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.6 | Unsigned32 | read-only | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. |
| OCT sheCistPortParamDesignatedRoot | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.7 | OCTET STRING | read-only | One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| U32 sheCistPortParamDesignatedCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.8 | Unsigned32 | read-only | A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch. |
| OCT sheCistPortParamDesignatedBridge | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.9 | OCTET STRING | read-only | A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. |
| OCT sheCistPortParamDesignatedPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.10 | OCTET STRING | read-only | The port identifier of the port that transmitted a BPDU to me. |
| T/F sheCistPortParamTcAck | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.11 | TruthValue | read-only | A boolean. Set if a Configuration Message with a topology change acknowledge flag set is to be transmitted. |
| T/F sheCistPortParamAdminEdgePort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.12 | TruthValue | read-only | Port can be configured to be an edge port. |
| T/F sheCistPortParamOperEdgePort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.13 | TruthValue | read-only | If port is configured to be an edge port, in the absence of a received BPDU, this port is identified as an operEdgePort. |
| T/F sheCistPortParamMacEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.14 | TruthValue | read-only | The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE. |
| T/F sheCistPortParamMacOperational | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.15 | TruthValue | read-only | The value of this parameter is TRUE if the MAC entity is in a functioning state; i.e., the MAC entity can be used to transmit and/or receive frames, and its use is permitted by management. Its value is otherwise FALSE. |
| SHE sheCistPortParamAdminPointToPointMac | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.16 | SheCistAdminPTPMacType | read-only | This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures. |
| T/F sheCistPortParamOperPointToPointMac | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.17 | TruthValue | read-only | TRUE, if the MAC is connected to a point-to-point LAN, otherwise FALSE. |
| OCT sheCistPortParamRegionalRootId | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.18 | OCTET STRING | read-only | The CIST Regional Root is the bridge of this region that has the lowest External Root Path Cost through a Boundary Port. |
| U32 sheCistPortParamRegionalRootPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.19 | Unsigned32 | read-only | Path cost to the CIST Regional Root, the bridge of this region that has the lowest External Root Path Cost through a Boundary Port. |
| U32 sheCistPortParamPortHelloTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.20 | Unsigned32 | read-only | The hello time actual used by that port. |
| U32 sheCistPortParamHelloTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.21 | Unsigned32 | read-only | The time interval between the generation of Configuration BPDUs by the Root. |
| SHE sheCistPortParamPortRole | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.22 | SheMstpPortParamPortRoleType | read-only | The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology. |
| U32 sheCistPortParamCurrentPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.23 | Unsigned32 | read-only | The current path cost |
| T/F sheCistPortParamLoopDetect | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.24 | TruthValue | read-only | The current loop detect state. Note: Only supported by hix5608 R1.3!! |
| sheCistControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4 | |||
| SHE sheCistControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. sheCistBridgeProtoParam - resetCistTc parameters: 'no' - modifyCistBridgeParameters parameters: sheCistControlBridgeProtoParamBridgePriority sheCistControlBridgeProtoParamBridgeMaxAge sheCistControlBridgeProtoParamBridgeHelloTime sheCistControlBridgeProtoParamBridgeForwardDelay sheCistControlBridgeProtoParamForceVer sheCistControlBridgeProtoParamMaxHops sheCistControlBridgeProtoParamSelfLoopDetect sheCistPortParamTable - modifyCistPortParamEntry parameters: sheCistControlPortParamIndex sheCistControlPortParamPortPriority sheCistControlPortParamAdminPathCost sheCistControlPortParamAdminEdgePort sheCistControlPortParamMacEnabled sheCistControlPortParamAdminPointToPointMac |
| SHE sheCistControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheCistControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheCistControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheCistControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| U32 sheCistControlBridgeProtoParamBridgePriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.6 | Unsigned32 | read-write | Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. parameter for - modifyCistBridgeParameters |
| U32 sheCistControlBridgeProtoParamBridgeMaxAge | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.7 | Unsigned32 | read-write | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters |
| U32 sheCistControlBridgeProtoParamBridgeHelloTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.8 | Unsigned32 | read-write | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters |
| U32 sheCistControlBridgeProtoParamBridgeForwardDelay | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.9 | Unsigned32 | read-write | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters |
| SHE sheCistControlBridgeProtoParamForceVer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.10 | SheCistBridgeProtoParamForceVerType | read-write | When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation). Third version is Mstp compatibility. |
| I32 sheCistControlBridgeProtoParamMaxHops | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.11 | Integer32 | read-write | Number of possible hops in the region. Only used if forcedVersion = mstp(3). |
| T/F sheCistControlBridgeProtoParamSelfLoopDetect | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.12 | TruthValue | read-write | Enable/Disable the stp self loop detection. |
| U32 sheCistControlPortParamIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.13 | Unsigned32 | read-write | Index of the sheCistPortParamTable entry to be modified. parameter for - modifyCistPortParamEntry |
| U32 sheCistControlPortParamPortPriority | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.14 | Unsigned32 | read-write | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyCistPortParamEntry |
| U32 sheCistControlPortParamAdminPathCost | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.15 | Unsigned32 | read-write | When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyCistPortParamEntry |
| T/F sheCistControlPortParamAdminEdgePort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.16 | TruthValue | read-write | Port can be configured to be an edge port. parameter for - modifyCistPortParamEntry |
| T/F sheCistControlPortParamMacEnabled | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.17 | TruthValue | read-write | The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE. parameter for - modifyCistPortParamEntry |
| SHE sheCistControlPortParamAdminPointToPointMac | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.18 | SheCistAdminPTPMacType | read-write | This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures. parameter for - modifyCistPortParamEntry |
| sheMstpNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4 | |||
| NTF sheMstpBaseConfigModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.1 | MSTP base parameters has been modified. | ||
| NTF sheMstpBaseConfIdVlanIdListModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.2 | MSTP instance to VLAN ID mapping has been modified. | ||
| NTF sheMstpBridgeTcReset | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.3 | Mstp topology change detection flag has been reset. | ||
| NTF sheMstpBridgeParamEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.4 | Mstp bridge parameter entry has been modified. | ||
| NTF sheMstpPortParamEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.5 | Mstp port parameter entry has been modified. | ||
| NTF sheCistBridgeTcReset | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.6 | Cist topology change detection flag has been reset. | ||
| NTF sheCistBridgeParamModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.7 | Cist bridge parameters have been modified. | ||
| NTF sheCistPortParamEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.8 | Cist port parameter entry has been modified. | ||
| NTF sheMstpPortBridgeGroupAddressChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.9 | MSTP's bridge group address has been changed. | ||
| NTF sheMstpBaseConfigReqResultTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.10 | Configuration end trap for long running commands. | ||
| NTF sheMstpControlReqResultTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.11 | Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care. | ||
| NTF sheCistControlReqResultTrap | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.12 | Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care. | ||
| sheMstpPort | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6 | |||
| sheMstpPortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1 | not-accessible | The sheMstpPortTable holds a parameter related to overall MSTP protocol such as Bridge Group Address per port. The key is a pointer to the port equal to sheBridgePortIndex. | |
| sheMstpPortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1 | not-accessible | Entry of the sheMstpPortTable. | |
| ADR sheMstpPortBridgeGroupAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1.1 | SheMstpPortControlBridgeGroupAddress | read-only | MSTP bridge group Address to be used for the port. |
| sheMstpPortControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2 | |||
| SHE sheMstpPortControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.1 | SheBridgeControlRequestType | read-write | setMstpPortBridgeGroupAddress : sheMstpPortControlPortIndex sheMstpPortControlBridgeGroupAddress |
| SHE sheMstpPortControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.2 | SheControlStatusType | read-only | The status of a control request |
| U32 sheMstpPortControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| SHE sheMstpPortControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.4 | SheBridgeControlRequestType | read-only | The result of the last user command. |
| U32 sheMstpPortControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| I32 sheMstpPortControlPortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.6 | Integer32 | read-write | This object points to the sheBridgePortTable (same as sheBridgePortIndex). |
| ADR sheMstpPortControlBridgeGroupAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.7 | SheMstpPortControlBridgeGroupAddress | read-write | MSTP bridge group address to be used for the port. |
| sheMstpConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100 | |||
| sheMstpCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.1 | |||
| sheMstpCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.1.1 | Description. | ||
| sheMstpGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2 | |||
| sheMstpBaseParamGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.1 | Description. | ||
| sheMstpBaseControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.2 | Description. | ||
| sheMstpBridgeParamGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.3 | Description. | ||
| sheMstpPortParamGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.4 | Description. | ||
| sheMstpControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.5 | Description. | ||
| sheCistBridgeParamGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.6 | Description. | ||
| sheCistPortParamGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.7 | Description. | ||
| sheCistControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.8 | Description. | ||
| sheMstpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.9 | Description. | ||
| sheArp | 1.3.6.1.4.1.231.7.1.2.2.1.4.12 | |||
| sheArpBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.1 | |||
| SHE sheArpBroadcastFloodPermission | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.1.1 | ShePermissionType | read-only | That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) |
| sheArpControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2 | |||
| SHE sheArpControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. 801 - changeArpHandling parameters: sheArpControlBroadcastFloodPermission |
| SHE sheArpControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheArpControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheArpControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.4 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheArpControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| SHE sheArpControlBroadcastFloodPermission | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.6 | ShePermissionType | read-write | That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) Parameter for 801 - changeArpHandling |
| sheArpNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3 | |||
| NTF sheArpBroadcastFloodPermissionModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.2 | sheArpControlFloodPermission has been modified. | ||
| NTF sheArpFixedIpAddressTableEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.3 | sheArpFixedIpAddressTableEntry created. | ||
| NTF sheArpFixedIpAddressTableEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.4 | sheArpFixedIpAddressTableEntry modified. | ||
| NTF sheArpFixedIpAddressTableEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.5 | sheArpFixedIpAddressTableEntry deleted. | ||
| sheArpFixedIpAddressTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5 | not-accessible | A set of fixed IP-Addresses for the ARP-Replay-Agent. There are two restrictions for the amount of possible IpAddresses on subscriber ports. One per bridgePort via sheBridgePortIpAddressPermitCount and one per UNI port via sheBridgeBaseMaxIpUNI parameter (global for NE), which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Note: Currently, the SHE system support only 1 fixed IP address configuration per Bridgeport. For that reason, the NE will always use the configured Bridgeport index also as selected value for the tableindex sheArpFixedIpAddressIndex. The number of fixed addresses could be expanded in future releases, but such changes maybe force an index change for this table. | |
| sheArpFixedIpAddressEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1 | not-accessible | On entry consist of an Index ,one configured IP-Address, the bridgePortIndex of the configured port and the assoiated learned mac-address. Index for the Entry are the sheArpFixedIpAddressIndex. | |
| I32 sheArpFixedIpAddressIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.1 | Integer32 | read-only | A free running index for this table. |
| I32 sheArpFixedIpAddressBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.2 | Integer32 | read-only | The index of the bridgePort were this Ip-Address is configured for. |
| OCT sheArpFixedIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.3 | OCTET STRING | read-only | A configured fixed ip-address. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. |
| OCT sheArpFixedIpAddressLearnedMac | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.4 | OCTET STRING | read-only | The learned mac-address for this ipAddress-entry. |
| SHE sheArpFixedIpAntiSpoofingStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.5 | SheArpFixedIpAntiSpoofingStatusType | read-only | 0-inactive: IP Anti-spoofing Disabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful. |
| I32 sheArpFixedIpAddressInnerVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.6 | Integer32 | read-only | The inner vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8. |
| I32 sheArpFixedIpAddressOuterVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.7 | Integer32 | read-only | The outer vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8. |
| sheArpFixedIpAddressControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6 | |||
| SHE sheArpFixedIpAddressControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.1 | SheBridgeControlRequestType | read-write | A SetRequest on this attribute starts a command execution process in the NetElement. 802 - createArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 803 - modifyArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 804 - deleteArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex |
| I32 sheArpFixedIpAddressControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.2 | Integer32 | read-write | The index of the table-entry to be configured. |
| SHE sheArpFixedIpAddressControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.3 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command |
| U32 sheArpFixedIpAddressControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.4 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheArpFixedIpAddressControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.5 | SheBridgeControlReqResultType | read-only | Command result (error code) attribute. |
| U32 sheArpFixedIpAddressControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.6 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| I32 sheArpFixedIpAddressControlBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.7 | Integer32 | read-write | Look at table. |
| OCT sheArpFixedIpAddressControlAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.8 | OCTET STRING | read-write | look at table. |
| I32 sheArpFixedIpAddressControlInnerVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.9 | Integer32 | read-write | look at table. New parameter with R2.8. |
| I32 sheArpFixedIpAddressControlOuterVlanTag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.10 | Integer32 | read-write | look at table. New parameter with R2.8. |
| sheDhcpSnoop | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7 | |||
| sheDhcpSnoopingTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1 | not-accessible | look at table. | |
| sheDhcpSnoopingEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1 | not-accessible | One entry for every existing client for a bridgePort. | |
| I32 sheDhcpSnoopingBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.1 | Integer32 | read-only | BridgePortIndex from bridgePortTable. |
| IP sheDhcpSnoopingIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.2 | IpAddress | read-only | A client-assigned IP address from Dhcp server |
| OCT sheDhcpSnoopingMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.3 | OCTET STRING | read-only | A client's Mac address |
| I32 sheDhcpSnoopingRemainingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.4 | Integer32 | read-only | Remaining time until the lease time to the IP address is over |
| SHE sheIpAntiSpoofingStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.5 | SheIpAntiSpoofingStatusType | read-only | 0-inactive: IP Anti-spoofing Diabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful. |
| U32 sheDhcpSnoopingVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.6 | Unsigned32 | read-only | VlanIndex from VlanTable. This show which VLAN the client uses. |
| sheDhcpSnoopControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2 | |||
| SHE sheDhcpSnoopControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.1 | SheBridgeControlRequestType | read-write | deleteSnoopEntry(706), - it deletes a DHCP Snoop Entry as an ADMIN account. parameters: sheDhcpSnoopControlRequest sheDhcpSnoopControlBridgePortIndex sheDhcpSnoopControlIpAddress sheDhcpSnoopControlVlanId ipAntiSpoofingSet(707), - it enables or diables an IP Anti-spoofing at NE. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlEnable ipAntiSpoofingGracePeriodSet(708) - it sets a grace period when enabling an IP Anti-Spoofing. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlGracePeriod |
| SHE sheDhcpSnoopControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.2 | SheControlStatusType | read-only | |
| G32 sheDhcpSnoopControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.3 | Gauge32 | read-only | Wait time for the manager on long lasting commands |
| U32 sheDhcpSnoopControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.4 | Unsigned32 | read-only | Time stamp attribute set at the end of a command |
| SHE sheDhcpSnoopControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.5 | SheBridgeControlReqResultType | read-only | Result of the last command |
| I32 sheDhcpSnoopControlBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.6 | Integer32 | read-write | A BridgePort Index to delete from table. |
| IP sheDhcpSnoopControlIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.7 | IpAddress | read-write | The IP address of the snoop entry to delete |
| T/F sheIpAntiSpoofingControlEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.8 | TruthValue | read-write | True : Enable False : Disable Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. |
| I32 sheIpAntiSpoofingControlGracePeriod | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.9 | Integer32 | read-write | It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable. |
| U32 sheDhcpSnoopControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.10 | Unsigned32 | read-write | VlanIndex from VlanTable. This show which VLAN the client uses. |
| sheIpAntiSpoofingInfo | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3 | |||
| T/F sheIpAntiSpoofingEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.1 | TruthValue | read-only | This configuration enable/disable the IpAs feature for all subscriber ports of the NE. True : Enable False : Disable Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies. If this switch was enabled, only cards with convergate chipset will made check for the triple Ip-innerTag-OuterTag. Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. |
| I32 sheIpAntiSpoofingGracePeriod | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.2 | Integer32 | read-only | It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable. |
| I32 sheIpAntiSpoofingRemainingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.3 | Integer32 | read-only | After user sets up an IP Anti-Spoofing, there is some interval until this function is actually adjusted to a LineCard. It is called GracePeriod. This attruibute indicates the remaining time of real adjustment. |
| sheIpAntiSpoofingNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4 | |||
| sheIpAntiSpoofingEvents | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1 | |||
| NTF sheIpAntiSpoofingChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.1 | It notifies that the Ip Anti-Spoofing setting is changed. If sheIpAntiSpoofingEnableis True, it indicates IP Anti-Spoofing Enable. If sheIpAntiSpoofingEnable is False, it means IP Anti-Spoofing Disable. | ||
| NTF sheIpAntiSpoofingGracePeriodChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.2 | It notifies that GracePeriod of IpAnti-Spoofing is modified. | ||
| NTF sheDhcpSnoopingEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.3 | It notifies that the requested DhcpSnooping Entry was deleted. | ||
| sheArpVlanTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8 | not-accessible | Each entry in this table describe an arp flood policy based on vlan. | |
| sheArpVlanEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1 | not-accessible | entry of the table | |
| SHE sheArpVlanFloodFlag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1.1 | SheArpVlanFloodType | read-only | arp forward policy flag. |
| sheArpVlanControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9 | |||
| SHE sheArpVlanControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.1 | SheBridgeControlRequestType | read-write | command to control the sheArpVlanTable. the valid command should be: modifyArpVlanFlood(901): sheArpVlanControlVlanId sheArpVlanControlFloodFlag |
| SHE sheArpVlanControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.2 | SheControlStatusType | read-only | The status of a control request. |
| U32 sheArpVlanControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.3 | Unsigned32 | read-only | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE. |
| SHE sheArpVlanControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.4 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheArpVlanControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.5 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| INT sheArpVlanControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.6 | INTEGER | read-write | VLAN ID which is controlled for ARP flooding. |
| SHE sheArpVlanControlFloodFlag | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.7 | SheArpVlanFloodType | read-write | Arp foward policy. enable: flood ARP packets, disable: do not flood ARP packets |
| sheArpVlanNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.10 | |||
| NTF sheArpVlanFloodModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.10.1 | ARP flooding policy for a VLAN has been modified. | ||
| sheArpConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100 | |||
| sheArpCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.1 | |||
| sheArpCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.1.1 | The compliance statement for the ARP MIB. | ||
| sheArpGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2 | |||
| sheArpBaseGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.1 | Description. | ||
| sheArpControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.2 | Description. | ||
| sheArpNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.3 | Description. | ||
| sheArpFixedIpAddressGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.4 | Description. | ||
| sheArpFixedIpAddressControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.5 | Description. | ||
| sheDhcpSnoopingGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.6 | Description. | ||
| sheDhcpSnoopingControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.7 | Description. | ||
| sheDhcpSnoopingNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.8 | Description. | ||
| sheQoSPm | 1.3.6.1.4.1.231.7.1.2.2.1.4.13 | |||
| sheQoSPmCounterTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1 | not-accessible | The QoS Performance counter table. | |
| sheQoSPmCounterEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1 | not-accessible | The table provides set of hw-packet counters for egrees direction. The given values represent the current queue fill levels. These table will be indeced by the ifIndex of the GE uplink. To get usefull results, the NE should support a reasonable priority to queue mapping. | |
| C64 sheQoSPacketCounterQueue1 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.1 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue2 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.2 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue3 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.3 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue4 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.4 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue5 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.5 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue6 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.6 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue7 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.7 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSPacketCounterQueue8 | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.8 | Counter64 | read-only | Current number of packets in the Queue. |
| C64 sheQoSDroppedPacketCounter | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.9 | Counter64 | read-only | Dropped packets per Interface. |
| sheQoSPmControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2 | |||
| SHE sheQoSPmControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.1 | SheBridgeControlRequestType | read-write | clearQosPmCounters: sheQoSPmControlIndex |
| I32 sheQoSPmControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.2 | Integer32 | read-write | Value depends on the used ControlRequest. |
| SHE sheQoSPmControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.3 | SheControlStatusType | read-only | The status of a user command. . |
| G32 sheQoSPmControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheQoSPmControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.5 | SheBridgeControlReqResultType | read-only | The result of the last user command. |
| U32 sheQoSPmControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.6 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| sheQoSPmNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.3 | |||
| NTF sheQoSPmCountersCleared | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.3.1 | Counters cleared. | ||
| sheQoSPmConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100 | |||
| sheQoSPmCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.1 | |||
| sheQoSPmCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.1.1 | Description. | ||
| sheQoSPmGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2 | |||
| sheQoSPmGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.1 | Description. | ||
| sheQoSPmControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.2 | Description. | ||
| sheQoSPmNotificationsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.3 | Description. | ||
| sheUmas | 1.3.6.1.4.1.231.7.1.2.2.1.4.14 | |||
| sheUmasBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1 | |||
| T/F sheUmasUseDhcpNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.1 | TruthValue | read-only | Using the nexthop address of DHCP packet as a protected MAC address. |
| T/F sheUmasBaseUsePppoeNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.2 | TruthValue | read-only | Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request). |
| U32 sheUmasBasePppoeAgingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.3 | Unsigned32 | read-only | Indicates time until the next-hop address of pppoe is deleted from umas table. |
| sheUmasTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2 | not-accessible | The Uplink MAC antispoofing table. | |
| sheUmasEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1 | not-accessible | Umas is an abbreviation for Uplink mac anti spoofing. This table contains a few entries for Uplink (Gateway, DHCP server, etc) Mac anti-spoofing function. 2 ways for that: specifying a static Mac address and automatically collecting Mac addresses to be protected. | |
| I32 sheUmasIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.1 | Integer32 | read-only | The index of Umas table. |
| OCT sheUmasAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.2 | OCTET STRING | read-only | The mac address which is proctected. |
| T/F sheUmasIsStatic | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.3 | TruthValue | read-only | Indicates if this entry is static or not. |
| T/F sheUmasIsDhcpNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.4 | TruthValue | read-only | Indicates if this address is the next hop address of DHCP packet. |
| T/F sheUmasIsPppoeNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.5 | TruthValue | read-only | Indicates if this address is the next hop address of PPPoE packet. |
| sheUmasControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3 | |||
| SHE sheUmasControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.1 | SheUmasControlRequestType | read-write | setUmasUseDhcpNextHop: sheUmasControlUseDhcpNextHop addUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr delUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr setUmasUsePppoeNextHop: sheUmasControlUsePppoeNextHop setUmasPppoeAgingTime: sheUmasControlPppoeAgingTime |
| SHE sheUmasControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.2 | SheControlStatusType | read-only | Status of command. If requestBusy a command is still ongoing and another command will be rejected. |
| U32 sheUmasControlTimeStamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| G32 sheUmasControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.4 | Gauge32 | read-only | The maximum wait time for the manager for a long running user command. |
| SHE sheUmasControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.5 | SheUmasControlReqResultType | read-only | The result of the last user command. |
| OCT sheUmasControlStaticAddr | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.6 | OCTET STRING | read-write | The static MAC address which should be protected. |
| T/F sheUmasControlUseDhcpNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.7 | TruthValue | read-write | Using the nexthop address of DHCP packet as a protected MAC address. |
| I32 sheUmasControlIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.8 | Integer32 | read-write | Index for controlrequest to identify the table entry. |
| T/F sheUmasControlUsePppoeNextHop | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.9 | TruthValue | read-write | Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request). |
| U32 sheUmasControlPppoeAgingTime | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.10 | Unsigned32 | read-write | Indicates time until the next-hop address of pppoe is deleted from umas table. |
| sheUmasNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4 | |||
| NTF sheUmasStaticAddrChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.1 | Called after addUmasStaticAddr(102), delUmasStaticAddr(103) is requested for notification. | ||
| NTF sheUmasUseDhcpNextHopChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.2 | Called after setUmasUseDhcpNextHop (101) is requested for notification. | ||
| NTF sheUmasUsePppoeNextHopChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.3 | Called after setUmasUsePppoeNextHop (104) is requested for notification. | ||
| NTF sheUmasPppoeAgingTimeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.4 | Called after setUmasPppoeAgingTime (105) is requested for notification. | ||
| NTF sheUmasVlanEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.5 | Configuration notification. | ||
| NTF sheUmasVlanEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.6 | Configuration notification. | ||
| sheUmasAlarms | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.10 | |||
| NTF sheUmasIUBlacklistOverflow | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.10.1 | UMAS blacklist overflow per card alarm. AlarmReportingSource -> entPhysicalIndex of card AlarmReportingSourceType -> physicalEntity New with R2.8 maintenance. | ||
| sheUmasVlanTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.5 | not-accessible | CR#003659 - UMAS extension with R2.8 New with R2.8 maintenance. | |
| sheUmasVlanEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.5.1 | not-accessible | The table contain all VLAN's for which dynamic UMAS should be supported. | |
| INT sheUmasVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.5.1.1 | INTEGER | read-only | A vlanid of which dynamic UMAS should be supported. |
| sheUmasVlanControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6 | |||
| SHE sheUmasVlanControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.1 | SheUmasControlRequestType | read-write | createUmasVlanEntry (110): sheUmasVlanControlVlanId deleteUmasVlanEntry (111): sheUmasVlanControlVlanId |
| SHE sheUmasVlanControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.2 | SheControlStatusType | read-only | The status of a user command. |
| U32 sheUmasVlanControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.3 | Unsigned32 | read-only | The time stamp of the last command (end of command). |
| G32 sheUmasVlanControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.4 | Gauge32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command. |
| SHE sheUmasVlanControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.5 | SheUmasControlReqResultType | read-only | The result of the last user command. |
| INT sheUmasVlanControlVlanId | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.6 | INTEGER | read-write | Table index to create or delete. |
| sheUmasConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100 | |||
| sheUmasCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.1 | |||
| sheUmasCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.1.1 | Description. | ||
| sheUmasGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2 | |||
| sheUmasGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.1 | Description. | ||
| sheUmasControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.2 | Description. | ||
| sheUmasNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.3 | Description. | ||
| sheCebs | 1.3.6.1.4.1.231.7.1.2.2.1.4.15 | |||
| sheCebsPortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1 | not-accessible | The CEBS port table | |
| sheCebsPortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1 | not-accessible | table entry | |
| I32 sheCebsPortBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1.1 | Integer32 | read-only | Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for. If created, the CEBS state of this Bridgeport is enabled. |
| sheCebsPortControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2 | |||
| SHE sheCebsPortControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.1 | SheBridgeControlRequestType | read-write | 950 - createCebsPortTableEntry Parameters : sheCebsControlBridgePortIndex 951 - deleteCebsPotyTableEntry Parameters : sheCebsControlBridgePortIndex |
| SHE sheCebsPortControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.2 | SheControlStatusType | read-only | configuration control status |
| U32 sheCebsPortControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheCebsPortControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.4 | SheBridgeControlReqResultType | read-only | Result of the last command |
| G32 sheCebsPortControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.5 | Gauge32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command |
| I32 sheCebsPortControlBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.6 | Integer32 | read-write | Index to the sheBridgePortTable. Points to the Bridgeport were this configuration is made for. If configured, the cebs state of this Bridgeport is enabled. |
| sheCebsSubscriberTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3 | not-accessible | The CEBS subscriber table | |
| sheCebsSubscriberEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1 | not-accessible | table entry | |
| IP sheCebsSubscriberIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.1 | IpAddress | read-only | The subscriber IP address configured by DHCP or operator. |
| I32 sheCebsSubscriberBridePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.2 | Integer32 | read-only | Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for. |
| I32 sheCebsSubscriberVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.3 | Integer32 | read-only | The vlan that subscriber uses. |
| T/F sheCebsSubscriberIsStatic | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.4 | TruthValue | read-only | Indicates if this subscriber is created by operator command, sheArpFixedIpAddressControlRequest. |
| T/F sheCebsSubscriberIsDynamic | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.5 | TruthValue | read-only | Indicates if this subscriber is created by DHCP. |
| I32 sheCebsSubscriberOperState | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.6 | Integer32 | read-only | The operating state specifying whether the subscriber is able to get CEBS service. 1 : Down 2 : Up |
| sheCebsDhcpGatewayTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4 | not-accessible | The CEBS Dhcp gateway table. | |
| sheCebsDhcpGatewayEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1 | not-accessible | table entry | |
| I32 sheCebsDhcpGatewayUserVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.1 | Integer32 | read-only | Subscriver vlan |
| IP sheCebsDhcpGatewayIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.2 | IpAddress | read-only | The dymamic IP address that a DHCP automatically sets as a gateway. |
| sheCebsStaticGatewayTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5 | not-accessible | The CEBS static gateway table | |
| sheCebsStaticGatewayEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1 | not-accessible | table entry | |
| I32 sheCebsStaticGatewayUserVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.1 | Integer32 | read-only | Subscriver vlan |
| IP sheCebsStaticGatewayIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.2 | IpAddress | read-only | The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically. |
| sheCebsStaticGatewayControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6 | |||
| SHE sheCebsStaticGatewayControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.1 | SheBridgeControlRequestType | read-write | 952 - createCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 953 - modifyCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 954 - deleteCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan |
| SHE sheCebsStaticGatewayControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.2 | SheControlStatusType | read-only | configuration control status |
| U32 sheCebsStaticGatewayControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command |
| SHE sheCebsStaticGatewayControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.4 | SheBridgeControlReqResultType | read-only | Result of the last command |
| G32 sheCebsStaticGatewayControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.5 | Gauge32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command |
| I32 sheCebsStaticGatewayControlUserVlan | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.6 | Integer32 | read-write | Subscriver vlan |
| IP sheCebsStaticGatewayControlIpAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.7 | IpAddress | read-write | The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically. |
| sheCebsVirtualMacTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7 | not-accessible | cebs virtual mac table | |
| sheCebsVirtualMacEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1 | not-accessible | table entry | |
| OCT sheCebsVirtualMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.1 | OCTET STRING | read-only | Mac address |
| I32 sheCebsVirtualMacType | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.2 | Integer32 | read-only | The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is a global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index. 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot. |
| PHY sheCebsVirtualMacEntPhysicalIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.3 | PhysicalIndex | read-only | The entPhysical index of the card/rack that this virtual mac will be used. This is table index also!! |
| sheCebsVirtualMacControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8 | |||
| SHE sheCebsVirtualMacControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.1 | SheBridgeControlRequestType | read-write | 955 - createCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress sheCebsVirtualMacControlType SheCebsVirtualMacControlEntPhysicalIndex 956 - deleteCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress |
| SHE sheCebsVirtualMacControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.2 | SheControlStatusType | read-only | configuration control status |
| U32 sheCebsVirtualMacControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheCebsVirtualMacControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.4 | SheBridgeControlReqResultType | read-only | Result of the last command |
| G32 sheCebsVirtualMacControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.5 | Gauge32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command |
| OCT sheCebsVirtualMacControlAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.6 | OCTET STRING | read-write | Virtual mac address used during CEBS service |
| I32 sheCebsVirtualMacControlType | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.7 | Integer32 | read-write | The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot. |
| PHY sheCebsVirtualMacControlEntPhysicalIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.8 | PhysicalIndex | read-write | The entPhysical index of the card/rack that this virtual mac will be used. Index of the table entry which should be modified. |
| sheCebsNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9 | |||
| NTF sheCebsPortTableEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.1 | sheCebsPortTableEntry has been created. | ||
| NTF sheCebsPortTableEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.2 | sheCebsPortTableEntry has been deleted. | ||
| NTF sheCebsStaticGatewayTableEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.3 | sheCebsStaticGatewayTableEntry has been created. | ||
| NTF sheCebsStaticGatewayTableEntryModified | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.4 | sheCebsStaticGatewayTableEntry has been modified. | ||
| NTF sheCebsStaticGatewayTableEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.5 | sheCebsStaticGatewayTableEntry has been deleted. | ||
| NTF sheCebsVirtualMacTableEntryCreated | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.6 | sheCebsPortTableEntry has been created. | ||
| NTF sheCebsVirtualMacTableEntryDeleted | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.7 | sheCebsVirtualMacTableEntry has been deleted. | ||
| sheCebsConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100 | |||
| sheCebsCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.1 | |||
| sheCebsCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.1.1 | Description. | ||
| sheCebsGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2 | |||
| sheCebsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.1 | Description. | ||
| sheCebsControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.2 | Description. | ||
| sheCebsNotificationsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.3 | Description. | ||
| sheMat | 1.3.6.1.4.1.231.7.1.2.2.1.4.16 | |||
| sheMatBase | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.1 | |||
| I32 sheMatDslamId | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.1.1 | Integer32 | read-only | A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned. NOTE: A modified DSLAM ID need an IU reset for activation! |
| SHE sheMatTranslationMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.1.2 | SheMatTranslationModeType | read-only | The attribute describes, which format for MAC address translation will be used. general structure: byte5-byte4-byte3-byte2-byte1-byte0 bit47 .........................bit0 world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. |
| sheMatPortTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2 | not-accessible | The MAT port table for enable/disable this feature on bridgePort base. NOTE: This table will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable. | |
| sheMatPortEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1 | not-accessible | table entry | |
| T/F sheMatPortEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1.1 | TruthValue | read-only | Enable or disable the MAC address translation feature on bridgePort base. NOTE: This parameter will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable. |
| sheMatTable | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3 | not-accessible | The MAT table contain the translated MAT addresses and her original laerned value. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the BridgePortIndex, which is the first table index here. If a valid BridgePortIndex value was used, only the tableEntries with this BridgePortIndex as first key will be refreshed. If the BridgePortIndex is 0 or unknown the full table will be refreshed. | |
| sheMatEntry | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1 | not-accessible | table entry | |
| OCT sheMatTranslatedMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.1 | OCTET STRING | read-only | Translated MAC address |
| OCT sheMatOriginalMacAddress | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.2 | OCTET STRING | read-only | Original MAC address |
| U32 sheMatIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.3 | Unsigned32 | read-only | This index is the new third index value for this table. |
| sheMatControl | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4 | |||
| SHE sheMatControlRequest | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.1 | SheMatControlRequestType | read-write | setDslamId(100): sheMatControlDslamId setPortEnable(101): sheMatControlBridgePortIndex sheMatControlPortEnable setMatTranslationMode(102): sheMatControlTranslationMode NOTE: SheMatPortTable will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! Usecase setPortEnable(101) is not longer supported!! Release R2.8 will support a new port specific enable command via sheBridgePortTable! New with R2.8 maintenance: refreshMatTable (105): sheMatControlBridgePortIndex |
| SHE sheMatControlStatus | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.2 | SheControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution is in process. - Values : idle, busy, passed, failed - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at the end of a command |
| U32 sheMatControlTimestamp | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.3 | Unsigned32 | read-only | Time stamp attribute set at the end of a command. |
| SHE sheMatControlReqResult | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.4 | SheBridgeControlReqResultType | read-only | Result of the last command |
| U32 sheMatControlTimer | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.5 | Unsigned32 | read-only | Maximum command execution time (timeout) in seconds in case of a long running command |
| I32 sheMatControlDslamId | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.6 | Integer32 | read-write | A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned. |
| U32 sheMatControlBridgePortIndex | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.7 | Unsigned32 | read-write | A bridge port index identifier |
| T/F sheMatControlPortEnable | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.8 | TruthValue | read-write | Sets MAC address translation enable/disable. NOTE: This value will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! |
| SHE sheMatControlTranslationMode | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.9 | SheMatTranslationModeType | read-write | The attribute descripes, which format for MAC address translation will be used. world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. |
| sheMatNotifications | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5 | |||
| NTF sheMatDslamIdChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.1 | sheMatDslamId has been changed. | ||
| NTF sheMatPortEnableChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.2 | sheMatPortEnable has been changed. | ||
| NTF sheMatTranslationModeChanged | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.3 | sheMatTranslationMode has been changed. | ||
| NTF sheMatTableUpdated | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.4 | MAT table update finished. | ||
| sheMatConformance | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100 | |||
| sheMatCompliances | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.1 | |||
| sheMatCompliance | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.1.1 | Description. | ||
| sheMatGroups | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2 | |||
| sheMatGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.1 | Description. | ||
| sheMatControlGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.2 | Description. | ||
| sheMatNotificationsGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.3 | Description. | ||
| sheMatObsoleteGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.4 | Description. | ||
| sheMatObsoleteNotificationGroup | 1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.5 | Description. |
RFC description
Manages bridging features, VLAN configuration, and port settings for Nokia Siemens Networks DSLAM equipment.
Start monitoring Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.