All MIBs › SHE-BRIDGE-MIB › sheBridgePortControlIpAsMode
sheBridgePortControlIpAsMode
Module: SHE-BRIDGE-MIB
OID (symbolic): SHE-BRIDGE-MIB::sheBridgePortControlIpAsMode
OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30
Node type: OBJECT-TYPE
Type: SheBridgePortIpAsModeType
Access: read-write
Description: This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks:
offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded.
All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'.
The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration.
New parameter with SHE R2.8.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30 snmpwalk -v2c -c public <target> SHE-BRIDGE-MIB::sheBridgePortControlIpAsMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30.1 snmpget -v2c -c public <target> SHE-BRIDGE-MIB::sheBridgePortControlIpAsMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30.1 s <value>
Start monitoring Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-BRIDGE-MIB::sheBridgePortControlIpAsMode OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.7 | siemensUnits | AN-MIB |
| 1.3.6.1.4.1.231.7.1 | oenProductMibs | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2 | an | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2.2 | ppe | AN-SHE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1 | she | AN-SHE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.2.1.4 | sheBridgeMib | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.1 | sheBridge | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4 | sheBridgePortControl | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30 | sheBridgePortControlIpAsMode | SHE-BRIDGE-MIB |