SHE-BRIDGE-MIB :: sheLagPortActorAdminState

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › SHE-BRIDGE-MIB › sheLagPortActorAdminState

sheLagPortActorAdminState

Module: SHE-BRIDGE-MIB

OID (symbolic): SHE-BRIDGE-MIB::sheLagPortActorAdminState

OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19

Node type: OBJECT-TYPE

Type: SheLagStateType

Access: read-only

Description: A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs.

The first bit of string corresponds to bit 7 (Expired). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is in the EXPIRED state

The second of string bit corresponds to bit 6 (Defaulted). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is using Defaulted operational Partner information, administratively configured for the Partner.

The third of string bit corresponds to bit 5 (Distributing). FALSE (encoded as a 0) means distribution of outgoing frames on this link is definitely disabled.

The fourth of string bit corresponds to bit 4(Collecting). TRUE (encoded as a 1) means collection of incoming frames on this link is definitely enabled.

The fifth of string bit corresponds to bit 3 (Synchronization). If FALSE (encoded as a 0), then this link is currently OUT_OF_SYNC, i.e., it is not in the right Aggregation.

The sixth of string bit corresponds to bit 2 (Aggregation). If FALSE (encoded as a 0), the link is considered to be Individual, i.e., this link can be operated only as an individual link.

The seventh of string bit corresponds to bit 1 (LACP_Timeout). Short Timeout is encoded as a 1; Long Timeout is encoded as a 0.

The eighth of string bit corresponds to bit 0 of Actor_State (LACP_Activity). Active LACP is encoded as a 1; Passive LACP is encoded as a 0.

The values of LACP_Activity,LACP_Timeout and Aggregation allow administrative control and could be set by controlgroup.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19
snmpwalk -v2c -c public <target> SHE-BRIDGE-MIB::sheLagPortActorAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19.1
snmpget -v2c -c public <target> SHE-BRIDGE-MIB::sheLagPortActorAdminState.1

Start monitoring Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-BRIDGE-MIB::sheLagPortActorAdminState OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.7siemensUnitsAN-MIB
1.3.6.1.4.1.231.7.1oenProductMibsAN-MIB
1.3.6.1.4.1.231.7.1.2anAN-MIB
1.3.6.1.4.1.231.7.1.2.2ppeAN-SHE-MIB
1.3.6.1.4.1.231.7.1.2.2.1sheAN-SHE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.7.1.2.2.1.4sheBridgeMibSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.5sheLagSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.5.2sheLagPortTableSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1sheLagPortEntrySHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19sheLagPortActorAdminStateSHE-BRIDGE-MIB