-- -- she-bridge-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Monday, January 18, 2010 at 11:44:00 -- -- Start of ClearCase branch-information of current release: -- she-bridge-mib.mib /main/she_main_grf/she_r2.8_grf/20 -- End of ClearCase branch-information. SHE-BRIDGE-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB entPhysicalIndex, PhysicalIndex FROM ENTITY-MIB ifIndex, InterfaceIndex FROM IF-MIB sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity, SheAlarmSevProfileIndex FROM SHE-ALARMING-MIB SheControlStatusType, SheEnableType, ShePermissionType, SheAdminStateType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC; sheBridgeMib MODULE-IDENTITY LAST-UPDATED "201001181600Z" -- January 18, 2010 at 16:00 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BCS BBA RD SDE gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION "This MIB contains all needed informations about bridgePorts and all supported she bridgeing features." REVISION "200506010951Z" -- June 01, 2005 at 09:51 GMT DESCRIPTION "Change contens of mstp-notifications. Change limit for sheQueueWeight - 0 is not valid. Change sequence of bits for sheLagPortPartnerAdminState and sheLagPortPartnerOperState. Define size for sheIgmpProviderControlProxyIpAddress." REVISION "200506081002Z" -- June 08, 2005 at 10:02 GMT DESCRIPTION "Change syntax for sheBridgePortMcastGroupPackageList. Change definition for SheLagStateType. Add new entrys in sheBridgePort-table to configure special features. Add new values for BridgePortUsage-Type. Add new table and controlgroup for sheBridgeMacProfile for feature IpoA. Add new entry sheVlanDefaultGateway in sheVlanTable to support IpoA mode. New Rule portFlowControl03(18) to set PVID on the basis of Ethertyp and portindex. New genericRule type defined. Add value ranges to meteringprofile-table." REVISION "200506241031Z" -- June 24, 2005 at 10:31 GMT DESCRIPTION "Add new values in SheDhcpRelayAgentOptionType to support simplified Dhcp Relay Agent. Change SheHostConfigurationProtocolType to support DHCP and PPPoE on the same port. Add entry in sheVlanTable for additional PPPoE-Provider-Index. New control request to configure this entry. Modify description for sheBridgeBaseOuterPVID. Add new rules and new Attributes to sheRuleAndMetering-table. New entry sheIgmpMaxJoinedSubscriber in sheIgmpBase. Add also new controlrequest to modify this entry." REVISION "200507081402Z" -- July 08, 2005 at 14:02 GMT DESCRIPTION "Define a value range for sheIgmpMaxJoinedSubscriber. Add comment for activation of IPoA-mode (BridgePortTable)." REVISION "200507230959Z" -- July 23, 2005 at 09:59 GMT DESCRIPTION "Change sheRuletable. Add some entrys and change descriptions. All new values only used for generic rule types (expert mode)! New value in sheIgmpGroupTable for information about currently supplied card's." REVISION "200508121001Z" -- August 12, 2005 at 10:01 GMT DESCRIPTION "Add new values in sheBridgeBase-Group. Add values to sheBridgePortCreated-notification. Delete value CpuPermit from sheFdb-Table. Change range and default for sheErpDomainWaitToRestoreTime. Change range for sheDhcpRelayRemoteId to 6..64." REVISION "200508241052Z" -- August 24, 2005 at 10:52 GMT DESCRIPTION "Change description for BridgePortMode." REVISION "200509061026Z" -- September 06, 2005 at 10:26 GMT DESCRIPTION "Add comment for autogenerate of valid macaddress for IPoA mode. Add sheVlanPPPoEProviderIndex to VlanCreated-Trap. Add controlrequest-type modifyRule and corresponding notification. Change name and description for sheIgmpPortGroupsTimeSinceLastMembRep to sheIgmpPortGroupsTimeFirstMembRep." REVISION "200603161554Z" -- March 16, 2006 at 15:54 GMT DESCRIPTION "sheArpVlanTable and sheArpVlanControl node were added in to support the vlan arp flooding control." REVISION "200608161314Z" -- August 16, 2006 at 13:14 GMT DESCRIPTION "Take over by Gerd Barchmann for R2.5." REVISION "200609141534Z" -- September 14, 2006 at 15:34 GMT DESCRIPTION "Use sheVlanIndex as index for sheDhcpFloodVlanIdTable and sheIgmpFloodVlanTable. Add new features from SHE R2.3 MIB version 152 (BridgeBase, Vlan, Fdb)." REVISION "200610171149Z" -- October 17, 2006 at 11:49 GMT DESCRIPTION "Merge update for new SHE R2.3 MIB-Version 153. Merge update for new SHE R2.3 MIB-Version 154." REVISION "200611221256Z" -- November 22, 2006 at 12:56 GMT DESCRIPTION "Minor changes for backward compatibility. Add bridgePort-mode PPPoA. Add index parameter to sheUmasControl-Group. Merge new data for IGMP from SHE MIB release 155 for R2.3." REVISION "200612131022Z" -- December 13, 2006 at 10:22 GMT DESCRIPTION "Change parameter sequence for some bridgePort-Trap's. Modify comment for sheReducedQueuePriorityTable. Add new values to sheVLanTable for protocol handling configuration of DHCP, PPPoE ,ARP and IGMP on vlan base." REVISION "200701221430Z" -- January 22, 2007 at 14:30 GMT DESCRIPTION "Correct range for sheIgmpProviderQueryInterval, IgmpProviderQueryResponseInterval, sheIgmpProviderStartupQueryInterval and IgmpProviderLastMemberQueryInterval. Some of the new values in sheVlanTable for protocol handling on vlan base removed again. The other ons will be supported with release R2.5.1. Remove not usable BridgePort-Tagging modes! Add an VlanServiceType value. Add vlan identifier to the list of available values for sheBridgeBaseCircuitIdFormat and sheBridgeBaseRemoteIdFormat. Correct Description for QueuePerformanceCounters. Introduce new sheBridgeIUProfileTable for IU specific Bridge-Configurations. Merge with SHE2.3 MIB release 156." REVISION "200703051024Z" -- March 05, 2007 at 10:24 GMT DESCRIPTION "Modify Range and description for sheBridgePortMaxLearnPermitCount." REVISION "200703211453Z" -- March 21, 2007 at 14:53 GMT DESCRIPTION "Modify index value for sheCebsVirtualMacAddressTable." REVISION "200703281019Z" -- March 28, 2007 at 10:19 GMT DESCRIPTION "New Release R2.5.2: Modify maximum range for sheBridgePortMaxLearnPermitCount. Expand MAT for TCom requirement. Expand QueueConfiguration per card. Modify MeterProfileConfiguration for more flexible configuration of policing/shaping for DS/US. " REVISION "200704121021Z" -- April 12, 2007 at 10:21 GMT DESCRIPTION "Modifications after review of AFI MIB release SHE R2.5.2. New attribute in sheLagGroupTable." REVISION "200704271558Z" -- April 27, 2007 at 15:58 GMT DESCRIPTION "Add attribute to sheVlan-table to support McastFlood configuration. Modify description for support of sheVlanMulticastPermission attribute in R2.5.2. Modify descriptions for support of some sheDhcpProviderTable attributes in R2.5.2. Merge MIB 159 for late feature of R2.3 for common MIB version (BridgePortTable, UMAS)." REVISION "200705090838Z" -- May 09, 2007 at 08:38 GMT DESCRIPTION "Modify configuration for DsShaping per Port/Queue. Add parameters to sheBridgePortTable for individual multicast configuration. Modify descriptions for support of some sheDhcpProviderTable attributes in R2.5.2." REVISION "200705101053Z" -- May 10, 2007 at 10:53 GMT DESCRIPTION "Remove not longer needed shaping parameter from sheMeterProfileTable." REVISION "200705231107Z" -- May 23, 2007 at 11:07 GMT DESCRIPTION "Add new detailed ReqResult-Values. Remove support for sheIgmpMaxJoinedSubscribers. Add new value sheDhcpBcastTranslationDs to dhcp provider table. Change default value for sheVlanServiceType. Enable/disable MAT per Vlan. Mat per BridgePort is not longer supported." REVISION "200706060901Z" -- June 06, 2007 at 09:01 GMT DESCRIPTION "Correct only descriptions regarding SHE version change R2.5.2->R2.6." REVISION "200707091618Z" -- July 09, 2007 at 16:18 GMT DESCRIPTION "Correct description for textual convention SheDhcpRelayAdminStateType. Correct syntax for sheIgmpProfileVlanInnerVlanId. Correct range for sheMatBaseDslamId." REVISION "200707190901Z" -- July 19, 2007 at 09:01 GMT DESCRIPTION "Correct ranges for shapingprofile parameters. Merge MIB release for SHE R2.4 -> -sheBridgePortIgmpSubscriberAccessMode added into sheBridgePortTable. -sheIgmpProviderVlanMulticastLimitation added into sheIgmpProfileTable. -sheIgmpProfileVlanForkingMode added into sheIgmpProfileVlanTable, controlgroup and trap. -sheErpDomainGlobalGroup and sheErpDomainGlobalControl added." REVISION "200708101348Z" -- August 10, 2007 at 13:48 GMT DESCRIPTION "Correct objectlist for sheIgmpProfileVlanEntryCreated-trap." REVISION "200709131029Z" -- September 13, 2007 at 10:29 GMT DESCRIPTION "Modify description for sheVlanServiceTagOnly. Merge modification from new R2.4 MIB proposal (not supported by R2.6). " REVISION "200710241000Z" -- October 24, 2007 at 10:00 GMT DESCRIPTION "R2.7. Minor descriptional changes. Expand index of sheMatTable." REVISION "200710241117Z" -- October 24, 2007 at 11:17 GMT DESCRIPTION "New release SHE R2.8 supported. Add functions in sheBridgePortTable and BridgeBase. Add option to sheDhcpRelayAgentOptionType. Add functions in sheDhcpProviderTable. Add functions in sheIgmpProfileTable. Add support for IGMPv3." REVISION "200711141137Z" -- November 14, 2007 at 11:37 GMT DESCRIPTION "Correct syntax for sheMatControlReqResult. Modify index value for sheMatTable again. Update parameter for IGMPv3 support. Modify parameter description for sheDhcpBcastTranslationDs and sheDhcpCebsMacTranslation. Modify parameter names for sheBridgePortPriorityMap usage. Correct syntax and description for sheIgmpMaxJoinedGroup." REVISION "200711221024Z" -- November 22, 2007 at 10:24 GMT DESCRIPTION "Restore Vlan-Configuration for DHCP again. Rename IgmpSourceIpTable." REVISION "200712051018Z" -- December 05, 2007 at 10:18 GMT DESCRIPTION "Add parameter for NodeIdentifier to DHCP provider configuration. Add vlan-id for DHCP snooping table (CO hiX13600). Modify parameter list for Bridge CircuitId and RemoteId configuration." REVISION "200712181515Z" -- December 18, 2007 at 15:15 GMT DESCRIPTION "Made config for DhcpUseInnerTag global and separate config for PPPoE providers. Made config for IgmpUseInnerTag global. Expand BridgePortPriorityOptions configuration. Expand sheMatTranslationMode with mode thsNoIndexOffset." REVISION "200801071435Z" -- January 07, 2008 at 14:35 GMT DESCRIPTION "Modify PortPriorityOptions parameter. Modify RuleGenericMatchAction parameter." REVISION "200801150957Z" -- January 15, 2008 at 09:57 GMT DESCRIPTION "Expand BridgePort multicast configuration. Modify RuleGenericMatchAction parameter and add new RuleTablePattern. Modify ShapingProfileAssignment. " REVISION "200801281415Z" -- January 28, 2008 at 14:15 GMT DESCRIPTION "Correct sheIgmpModeModified trap. Remove last modifications for RuleGenericMatchAction parameter. Define new fixedRuleTypes for feature Policing per COS, Protokoll or Vlan." REVISION "200802251429Z" -- February 25, 2008 at 14:29 GMT DESCRIPTION "Modify AC feature for MC traffic on bridgeport and igmp provider side. Expand IGMP port statistic's for CA and AC counter. CEBS support by SHE system only if CXU types CXU_B, CXU_B1 or CXU_C are used (like R2.7)!" REVISION "200803200948Z" -- March 20, 2008 at 09:48 GMT DESCRIPTION "Add parameter to BridgeIUProfile for used MAT type selection. Add new BridgePortMCastTable + controlgroup to support new R2.8 Mcast parameters. Add/Modify parameters to IgmpBase, IgmpProvider and IgmpGroup to support IGMPv3 in R2.8. Add detailed failure returncode definitions to ReqResult enum. The scheduled support release is not defined yet." REVISION "200804181308Z" -- April 18, 2008 at 13:08 GMT DESCRIPTION "Correct description for sheIgmpDoubleTaggingControlRequest and sheIgmpGroupControlRequest. Modify description for BridgeBase CircuitId and RemoteId. Add parameter to vlan table for configuration of servicename. Modify description for sheBridgePortPriorityMapTable: default profile with index 1 can't be deleted. Add new parameter sheBridgePortMCastMinUCBandwithLimit to bridgePort MCast configuration table. Merge vlan parameter for uplink vlan translation from R2.6 RP2. " REVISION "200805281145Z" -- May 28, 2008 at 11:45 GMT DESCRIPTION "New parameters for CardQueueConfigurationTable to support HQS mode. New EthertypMapping configuration to support EthertypVlan mapping per bridgeport. New IpAntispoofing configuration to support IPAS per bridgeport. Expand parameter list for StaticIp configuration. Define new fixedRuleTypes for feature RateLimiting IGMP. New dhcp base parameter for StationMove feature enable/disable. Move ReplaceVlanTag parameter to IUPofileTable." REVISION "200806301119Z" -- June 30, 2008 at 11:19 GMT DESCRIPTION "Correct stationMoveModified trap. Correct syntax and description for sheBridgePortMCastAllowedVlanIdList. Assign DscpPriorityMapProfile via IUProfile configuration (add on). Correct CardQueueConfiguration table parameter list. Modify ShapingProfile assignment for 'perDslPort' usage." REVISION "200807141254Z" -- July 14, 2008 at 12:54 GMT DESCRIPTION "Move some R2.8 Mcast releated bridgeport parameter from sheBridgePortMCastConfigTable to new sheIgmpBridgePortProviderTable under the sheIgmp subtree -> new group sheIgmpBridgePortConfig. Move some new R2.8 parameters from sheIgmpProvileTable to sheIgmpProfileVlanTable." REVISION "200807251139Z" -- July 25, 2008 at 11:39 GMT DESCRIPTION "Modify syntax of sheIgmpPortGroupsStpIpAddress. The sheBridgePortReplaceVlanTag is used again for enable/disable the feature." REVISION "200808281034Z" -- August 28, 2008 at 10:34 GMT DESCRIPTION "Correct possible number accesible premium and non-premium Igmp groups per bridgePort. Correct the default mc bandwith limit per bridgePort to 'unlimited' - switch off ac feature. Correct description of sheBridgePortControlReplaceVlanTag." REVISION "200810071427Z" -- October 07, 2008 at 14:27 GMT DESCRIPTION "Correct IGMP trap parameter list: - sheIgmpProfileVlanEntryCreated - sheIgmpProfileVlanEntryModified. Correct syntax for parameters from sheCardQueueConfigurationTable." REVISION "200811061009Z" -- November 06, 2008 at 10:09 GMT DESCRIPTION "Modify remarks from ACI. Add new parameter to dhcp provider table. Modify comment for DhcpAdminState settings." REVISION "200811271540Z" -- November 27, 2008 at 15:40 GMT DESCRIPTION "Correct description of bridgePort inner and outer priorityOption setting. Correct description of queue weight and watermark settings. Correct description of igmp stats controlRequest commands. Remove 0 as possible value for sourceIp setting during igmpGroup configuration. Correct description of sheLagGroupCollectorMaxDelay - any modification will be ignored. Add new group sheBridgeExtResidentialConfig only supported by hiX5608!" REVISION "200901221445Z" -- January 22, 2009 at 14:45 GMT DESCRIPTION "Modify syntax for sheDhcpFloodVlanEnabled to enable the flooding for DHCP and PPPoE separatly. Expand IgmpProvider and IgmpGroup table with new parameter DefaultSourceIpList. New command for FdbTable refresh. New command for MatTable refresh. Add new value for circuitId/RemoteId definition. Expand length of circuitId and remoteId bridgeBase parameter." REVISION "200903021000Z" -- March 02, 2009 at 10:00 GMT DESCRIPTION "Correct description and default for sheIgmpProviderVlanMulticastLimitation. Move sheIgmpProviderDefaultSourceIdList to corresponding sheIgmpProfileVlanTable. Modify second index for sheIgmpPortGroupTable and add parameters. Expand range for sheBridgeBaseControlMaxHostName to 64. Correct default value sheBridgePortLeaveMode." REVISION "200904220823Z" -- April 22, 2009 at 08:23 GMT DESCRIPTION "R2.8 BFR2.0 MIB-Update. Correct wrong syntaxtype of sheErpDomainGlobalControlMacLearningDelay. Modify syntax for sheBridgePortMaxLearnPermitCount. Add missed parameter in sheFdbTable. DHCP provider config does still not need VlanId config (like R2.6). Add new cistPort parameter for support only by 5608 R1.3. Add new FdbControl parameter for support only by 5608 R1.3." REVISION "200906031640Z" -- June 03, 2009 at 16:40 GMT DESCRIPTION "Correct BridgeBaseModified trap parameter list. No change inside NE. Define default values for queue watermark settings. " REVISION "200908121445Z" -- August 12, 2009 at 14:45 GMT DESCRIPTION "Remove not supported R2.8 parameter for BaseMaxIpUni command and trap." REVISION "200909221622Z" -- September 22, 2009 at 16:22 GMT DESCRIPTION "Correct description for sheBridgePortMode. Correct description for sheVlanTunnelingL2Protocol and sheVlanDefaultGateway. Expand valid range for sheBridgePortIpAddressPermitCount to 64." REVISION "200911171626Z" -- November 17, 2009 at 16:26 GMT DESCRIPTION "Correct CircuitId and RemoteId format according TR101. Modify syntax for sheBcscVendorSpecific. Correct usable range for sheRuleControlTosPattern." REVISION "201001181125Z" -- January 18, 2010 at 11:25 GMT DESCRIPTION "Add new table for dynamic UMAS configuration per VLAN (CR#003659). Remove wildcard option from fdbTable refresh commands." ::= { she 4 } -- -- Type definitions -- SheBridgeModeType ::= INTEGER { basicMode(1), diffServMode(2), enhancedMode(3) } SheBridgeTaggingModeType ::= INTEGER { singleTag(1), doubleTag(2) } SheBridgeSharedVlanLearningType ::= INTEGER { disabled(0), enabled(1) } SheBridgeMacAntiSpoofingType ::= INTEGER { disabled(0), enabled(1) } SheBridgeRoutingModeType ::= INTEGER { residential(0), unrestricted(1), default(2) } SheBridgeDlfFilterType ::= INTEGER { disable(0), enable(1) } SheBridgeUnknownMulticastFilterType ::= INTEGER { disable(0), enable(1), enableDs(2), enableUs(3) } SheBridgeControlRequestType ::= INTEGER { none(0), noRequest(1), setBridgeMode(101), setBridgeTaggingMode(102), setBridgeMirrorPort(103), setBridgeOuterVlanDefaults(104), setBridgeCircuitIdFormat(105), setBridgeSharedVlanLearning(106), setBridgeRemoteIdFormat(107), setBridgeStagTPID(108), setBridgeMacAntiSpoofing(109), setBridgePortVLANDefaults(110), setBridgePortUsage(111), setBridgePortHostConfigurationProtocol(112), setBridgePortMaxLearnPermitCount(113), setBridgePortMcastGroupPackageList(114), setBridgePortFeature(115), setBridgePortCircuitId(116), setBridgePortRemoteId(117), clearBridgePortCircuitId(118), clearBridgePortRemoteId(119), setBridgeMacProfileSrcMacAddress(120), setBridgePortInnerPVID(121), setBridgeRoutingMode(122), setBridgeMaxHostName(123), setBridgeDlfFilter(124), setBridgeUnknownMulticastFilter(125), setBridgePortInnerPriority(126), setBridgePortIpoaProviderRouterIpAddress(127), setBridgeIpoaArpReqInterval(128), setBridgeIUProfilePPPoASrcMacAddress(131), setBridgeIUProfileUsedMATBasis(132), setBridgeIUProfileReplaceVlanTag(133), setBridgeIUProfileDscpPriorityMapProfileIndex(134), setBridgePortMcastParameter(135), setBridgePortIgmpSubscriberAccessMode(136), setBridgePortPriorityOptions(141), setBridgePortMatEnabled(142), setBridgePortIpAddressPermitCount(143), createBridgePortPrioMapEntry(151), deleteBridgePortPrioMapEntry(152), modifyBridgePortPrioMapEntry(153), setBridgePortExtMCastParameter(162), setBridgePortIpAsMode(165), setBridgePortEtypeVlanMapping(166), createEtypeVlanMapProfEntry(171), modifyEtypeVlanMapProfEntry(172), deleteEtypeVlanMapProfEntry(173), createVlan(201), deleteVlan(202), setVlanName(203), setVlanPorts(204), setVlanMulticastPermission(206), setVlanDhcpProviderIndex(207), setVlanDefaultGateway(208), setVlanPPPoEProviderIndex(209), setVlanMgmtVlan(210), setVlanServiceTagOnly(211), setVlanAgeingTime(212), setVlanRoutingMode(213), setVlanTunnelingL2Protocol(214), setVlanServiceType(215), setVlanDlfFlood(216), addVlanPorts(222), deleteVlanPorts(223), setVlanCCMode(230), setVlanRouted(231), setVlanMcastFlood(232), setVlanMatEnable(233), setVlanTranslation(235), modifySubportServiceName(242), clearRuleMatchCounter(299), modifyRule(300), createRule(301), deleteRule(302), createMeterProfile(303), deleteMeterProfile(304), modifyMeterProfile(305), setFdbBaseAgeingTime(401), setFdbBaseLearningUplink(402), refreshFdbTable(403), createFdbStaticEntry(404), createBcscEntry(501), modifyBcscEntry(502), deleteBcscEntry(503), modifyLagGroupEntry(601), modifyLagPortEntry(602), assignBridgePortToLag(603), unassignBridgePortFromLag(604), setDhcpAdminState(701), createDhcpProviderEntry(702), modifyDhcpProviderEntry(703), deleteDhcpProviderEntry(704), setDhcpRemoteId(705), deleteSnoopEntry(706), ipAntiSpoofingSet(707), ipAntiSpoofingGracePeriodSet(708), setDhcpFloodVlanId(709), setDhcpTagForProtocol(715), setDhcpStationMove(716), setIgmpMode(725), createIgmpProviderEntry(726), modifyIgmpProviderEntry(727), deleteIgmpProviderEntry(728), createIgmpProfileVlanEntry(729), deleteIgmpProfileVlanEntry(730), modifyIgmpProfileVlanDot1p(731), createIgmpGroupEntry(732), modifyIgmpGroupEntry(733), deleteIgmpGroupEntry(734), createIgmpMcastGroupPackageEntry(735), deleteIgmpMcastGroupPackageEntry(736), createPmObject(737), modifyPmObject(738), deletePmObject(739), setIgmpMaxJoinedSubscribers(740), clearIgmpStats(742), setIgmpProviderChannelAdmission(743), setIgmpMcastChannelParameter(744), setIgmpMaxJoinedGroup(745), modifyIgmpProfileVlanForkingMode(746), createIgmpSourceIpAddressEntry(747), deleteIgmpSourceIpAddressEntry(748), setIgmpTagMode(749), modifyMstpBaseStatus(750), modifyMstpBaseConfig(751), modifyMstpBaseConfIdVlanIdList(752), resetMstpTc(753), modifyMstpBridgeParamEntry(754), modifyMstpPortParamEntry(755), resetCistTc(756), modifyCistBridgeParameters(757), modifyCistPortParamEntry(758), setMstpPortBridgeGroupAddress(759), createIgmpBridgePortProviderEntry(763), modifyIgmpBridgePortProviderEntry(764), deleteIgmpBridgePortProviderEntry(765), modifyQueuePriorityMapping(775), modifyReducedQueuePriorityMapping(776), modifyQueueModeEntry(780), modifyQueueWeightEntry(781), configureCardQueueConfigurationEntry(790), deleteCardQueueConfigurationEntry(791), createShapingProfile(795), modifyShapingProfile(796), deleteShapingProfile(797), assignShapingProfile(798), deleteShapingProfileAssignment(799), modifyArpHandling(801), createArpFixedIpAddressEntry(802), modifyArpFixedIpAddressEntry(803), deleteArpFixedIpAddressEntry(804), modifyErpDomainTrafficVlan(825), modifyErpDomainEntry(826), activateErpDomain(827), operatorRequestErpDomain(828), modifyErpDomainGlobalGroup(829), clearQoSPmCounters(850), modifyArpVlanFlood(901), createCebsPortTableEntry(950), deleteCebsPotyTableEntry(951), createCebsStaticGatewayTableEntry(952), modifyCebsStaticGatewayTableEntry(953), deleteCebsStaticGatewayTableEntry(954), createCebsVirtualMacTableEntry(955), deleteCebsVirtualMacTableEntry(956), setExtResidentialMode(990) } SheBridgeControlReqResultType ::= INTEGER { none(0), noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38), noMoreResources(40), parameterConflict(41), vlanServiceTypeConflict(42), featureNotSupportedYet(50), vlanInternalGeneralFailure(2101), vlanCreateFailOnInvalidVlanID(2102), vlanDeleteFailOnInvalidVlanID(2103), vlanModifyFailOnInvalidVlanID(2104), vlanModifyFailOnInvalidParameterRange(2105), vlanModifyFailOnInvalidParameter(2106), vlanInternalFailureOnIuCommunication(2107), vlanInternalFailureOnRestrictedVlanAccess(2108), vlanPortListModifyFailOnInvalidPortId(2109), vlanPortListModifyFail(2110), vlanPortListModifyFailOnOnlyUplinksForMgmtVlan(2111), vlanPortListModifyFailOnRestrictedPortListForCCMode(2112), vlanModifyFailOnWrongServiceTypeSelected(2113), vlanModifyFailOnRestrictedPortListForCCMode(2114), vlanModifyFailOnMaxNumberOfVlanRelationsReachedForPort(2115), vlanMatModifyFailOnDslamIdNotSet(2116), vlanVrBindingModifyFailOnRouterIdNotSet(2117) } SheBridgePortUsageType ::= INTEGER { notUsed(1), upLink(2), cascading(3), subscriber(4), aggregated(5), subcascading(6), bondingNotUsed(10), bondingSubscriber(11), bondedSubscriber(12), physbondedSubscriber(13), vccAggregatorNotUsed(20), vccAggregatorUsed(21), vccAggregated(22) } SheHostConfigurationProtocolType ::= INTEGER { none(0), useDHCP(1), usePPPoE(2), useDHCPandPPPoE(3) } SheBridgePortModeType ::= INTEGER { useIpoE(0), useIpoA(1), usePPPoA(2), useAuto(3) } SheBridgePortTaggingModeType ::= INTEGER { off(0), tagged(1), untagged(2) } SheBridgePortIgmpSubscriberAccessModeType ::= INTEGER { ipoe(0), pppoe(1) } -- If a tag is added to an upstream user frame -- set the .1p priority bits -- dscp(1) -- - according DSCP of IP header (use sheBridgePortPriorityMapProfile) -- userTag(2) -- - according user tag .1p -- force(3) -- - per port configured .1p (use sheBridgePortPriority) SheBridgePortPriorityOptionType ::= INTEGER { dscp(1), userTag(2), force(3) } SheVlanStatusType ::= INTEGER { static(1), dynamic(2) } SheVlanServiceType ::= INTEGER { doubleTagging(1), vlanStacking(2) } SheRuleType ::= INTEGER { globalSrcMacDeny(1), portFlowControl(2), meteringBridgePort(3), qosVlan(4), qosDscp(5), qosBridgePort(6), providerDoubleTagVlan01(7), qosDoubleTagPrio01(8), qosDoubleTagDscp01(9), providerDoubleTagVlan02(10), qosDoubleTagPrio02(11), qosDoubleTagDscp02(12), mirrorBridgePort(13), qosDscp02(14), portFlowControl02(15), providerSingleTagVlan01(16), providerSingleTagVlan02(17), portFlowControl03(18), cosTranslation(19), etherTypTranslation(20), vlanTranslation(21), dscpTranslation(22), meteringDot1P(25), meteringVlan(26), meteringDhcpOnIU(27), meteringDhcpOnPort(28), meteringArpOnIU(29), meteringArpOnPort(30), meteringIgmpOnIU(31), meteringIgmpOnPort(32), meteringDslPort(33), genericRule(50), genericAdminRule(51) } -- -- SheRuleMatchType ::= INTEGER { ignore(1), exact(2), exclude(3) } SheRuleActionType ::= INTEGER { deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12), mirror(13) } SheRuleFlowType ::= INTEGER { upstream(1), downstream(2), bidirectional(3) } SheRuleGenericActionType ::= BITS { deny(0), allow(1), meter(2), redirect(3), mirror(4), setDscp(5), setPriority(6), changeTagPriority(7), changeTagPriorityWithTos(8), setIpPrecedence(9), changeTosWithTagPriority(10), rateLimit(11), changeVlanId(12), copyToCpu(13), count(14), untag(15) } SheRuleActivationStateType ::= INTEGER { notActive(0), active(1) } SheFdbStatusType ::= INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5), static(6) } SheLagMethodType ::= INTEGER { srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6) } SheLagStateType ::= BITS { lacpActivity(0), lacpTimeout(1), lacpAggregation(2), lacpSynchronization(3), lacpCollecting(4), lacpDistribution(5), lacpDefaulted(6), lacpExpired(7) } SheDhcpRelayAgentOptionType ::= INTEGER { dhcpNone(0), dhcpOption82CircuitId(1), dhcpOption82RemoteId(2), dhcpOption82Both(3), pppoeNone(4), pppoeOptionCircuitId(5), pppoeOptionRemoteId(6), pppoeOptionBoth(7), simpDhcpNone(8), simpDhcpOption82CircuitId(9), simpDhcpOption82RemoteId(10), simpDhcpOption82Both(11), dhcpOption82LineProperty(12), dhcpOption82CircuitIdLineProperty(13), dhcpOption82RemoteIdLineProperty(14), dhcpOption82BothIdLineProperty(15), pppoeOptionLineProperty(16), pppoeOptionCircuitIdLineProperty(17), pppoeOptionRemoteIdLineProperty(18), pppoeOptionBothIdLineProperty(19), simpDhcpOption82LineProperty(20), simpDhcpOption82CircuitIdLineProperty(21), simpDhcpOption82RemoteIdLineProperty(22), simpDhcpOption82BothIdLineProperty(23) } SheIgmpModeType ::= INTEGER { noIgmp(1), snoopOnly(3), proxy(4) } SheIgmpProfileVlanForkingModeType ::= INTEGER { noForking(0), ipoeForking(1), pppoeForking(2) } -- An Interval type identifier to select between the 15 minute -- counters and the day counter. ShePmIntervalType ::= INTEGER { min15(1), day(2) } -- A type identifier to estimate the validity of a PM event -- counter. ShePmSuspectFlagType ::= INTEGER { undefined(0), reliable(1), suspect(2) } SheIgmpStatsBaseControlRequestType ::= INTEGER { clearIgmpStatsBase(741) } SheIgmpStatsBaseControlStatusType ::= INTEGER { requestIdle(1), requestBusy(2), requestPassed(3), requestFailed(4) } SheIgmpStatsBaseControlReqResultType ::= INTEGER { noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38) } SheIgmpStatsPortControlRequestType ::= INTEGER { clearIgmpStatsPort(742) } SheIgmpStatsPortControlStatusType ::= INTEGER { requestIdle(1), requestBusy(2), requestPassed(3), requestFailed(4) } SheIgmpStatsPortControlReqResultType ::= INTEGER { noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongPortVlanIndex(38) } SheIgmpStatsProviderControlRequestType ::= INTEGER { clearIgmpStatsProvider(743) } SheIgmpFloodVlanControlRequestType ::= INTEGER { createIgmpFloodVlan(743), deleteIgmpFloodVlan(744) } SheBridgeInterfaceType ::= INTEGER { uplink(1), downlink(2), cascading(3), subcascading(4) } SheQueueModeType ::= INTEGER { strict(0), weighted(1) } -- The sheBridgePortIndex that is used to -- differentiate between logical ports. The value -1 is -- used to indicate that it is unassigned (Invalid). SheBridgePortIndexOrInvalid ::= INTEGER (-1 | 1..65535) SheErpDomainOperatorRequestType ::= INTEGER { manualToSecondary(1), clear(2) } SheErpNodeType ::= INTEGER { normalNode(1), rmNode(2) } -- The virtual LAN identifier (VLAN ID) that may be used to -- differentiate among traffic streams. The value -1 is -- used to indicate that it is unassigned (Invalid). SheVlanIdOrInvalid ::= Integer32 (-1 | 1..4094) SheErpDomainNodeStatusType ::= INTEGER { rmIdle(1), primaryProtecting(2), protecting(3), idle(4), failedSecondary(5), failedPrimary(6), preForward(7), isolated(8), deactivated(9), backoff(10) } SheErpDomainRingStatusType ::= INTEGER { normal(1), protecting(2), unknown(3) } SheBcscTrafficType ::= INTEGER { broadcast(1), multicast(2), dlf(3) } SheBcscScopeType ::= INTEGER { port(1), vlan(2) } SheBcscThresholdType ::= INTEGER { packetPerSecond(1), bytesPerSecond(2) } SheMstpPortParamStateType ::= INTEGER { blocking(1), listening(2), learning(3), forwarding(4), disabled(5), discarding(6) } SheMstpPortParamPortRoleType ::= INTEGER { rootPort(1), designatedPort(2), alternatePort(3), backupPort(4), disabledPort(5), masterPort(6) } SheCistBridgeProtoParamForceVerType ::= INTEGER { stpCompatibility(0), normalOperation(2), mstpCompatibility(3) } -- ForceTrue. The administrator requires the MAC to be -- treated as if it is connected to a point-to-point LAN. -- ForceFalse. The administrator requires the MAC to be -- treated as connected to a non-point-to-point LAN. -- Auto. The administrator requires the point-to-point -- status of the MAC to be determined by specific MAC -- procedures. SheCistAdminPTPMacType ::= INTEGER { forceTrue(1), forceFalse(2), auto(3) } SheMstpPortControlBridgeGroupAddress ::= INTEGER { bridgeGroupAddress(1), providerBridgeGroupAddress(2) } SheArpFixedIpAntiSpoofingStatusType ::= INTEGER { inactive(0), active(1) } SheIpAntiSpoofingStatusType ::= INTEGER { inactive(0), active(1) } SheArpVlanFloodType ::= INTEGER { enable(1), disable(2), default(3) } -- UMAS(Uplink MAC AntiSpoofing) -- SheUmasControlRequestType ::= INTEGER { setUmasUseDhcpNextHop(101), addUmasStaticAddr(102), delUmasStaticAddr(103), setUmasUsePppoeNextHop(104), setUmasPppoeAgingTime(105), createUmasVlanEntry(110), deleteUmasVlanEntry(111) } SheUmasControlReqResultType ::= INTEGER { noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37) } -- MAT(MAC Address Translation) -- SheMatControlRequestType ::= INTEGER { setDslamId(100), setPortEnable(101), setMatTranslationMode(102), refreshMatTable(105) } SheBridgePortEtypeActionType ::= INTEGER { noAction(0), addTag(1), replaceOuterTag(2) } -- -- Textual conventions -- SheMcastLeaveMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The leave mode of a bridgeport for mcast traffic." SYNTAX INTEGER { normal(0), fast(1), ehtMode(2) } SheBridgePortIpAsModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The possible settings for bridgeport based IpAntispoofing." SYNTAX INTEGER { offIpAs(0), onIpAsNoVlanCheck(1), onIpAsInnerVlanCheck(2), onIpAsOuterVlanCheck(3), onIpAsBothVlanCheck(4) } SheBridgeIUProfileUsedMATBasisType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used type for selection of MAT basis per IU." SYNTAX INTEGER { useMATperVlan(1), useMATperBridgeport(2) } SheBridgePortACStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { deny(0), accept(1) } SheVlanRoutedType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ARP handling per vlan." SYNTAX INTEGER { switching(0), routing(1) } SheMeterProfileUseParametersType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This type definition defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used. " SYNTAX BITS { policingUS(0), policingDS(1) } SheDhcpRelayAdminStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop Attention: The value up(1) and down(2) are only valid for she R1.5, R2.0 and R2.3. Release R2.5 and later will only accept value's 4..12" SYNTAX INTEGER { up(1), down(2), testing(3), dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), dhcpPppoeBridgeRelay(10), dhcpPppoeBridgeSnoop(11), dhcpPppoeBridgeBridge(12) } SheDhcpUseTagForProtocolsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used for configuration of global DHCP and PPPoE useTag settings." SYNTAX BITS { dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1) } SheIgmpVlanMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Configure VLAN mode for the system. This configuration is only functions when system is configured in double tagging mode." SYNTAX INTEGER { inner(1), outer(2) } SheIgmpVersionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To configure the supported Igmp version on provider vlan base." SYNTAX INTEGER { iGMPv2(1), iGMPv3(2), iGMPv3Compatible(3) } SheIgmpProviderASM ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { enable(1), disable(2) } SheIgmpProviderVlanCxuSnoopingState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { disable(0), enable(1) } SheIgmpPortGroupsFiltermodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "filter-mode may be either INCLUDE or EXCLUDE." SYNTAX INTEGER { include(1), exclude(2) } SheIgmpProviderACStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { deny(0), accept(1) } SheQueueColourAwareType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { none(0), dscp(2), providerBridge(4) } SheQueueDiscardPolicyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { tailDrop(1), wRed(2) } SheCardQueueModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The possible queue modes a DSL IU can use." SYNTAX INTEGER { mode4QueueFlat(1), mode8QueueFlat(2), modeHQS(3) } SheMatTranslationModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The attribute descripes, which format for MAC address translation will be used." SYNTAX INTEGER { world(1), ths(2), thsNoIndexOffset(3) } SheVlanProtocolHandlingType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Protocol handling per Vlan. " SYNTAX INTEGER { off(0), deny(1), proxy(2) } SheBridgePortMCastAllowedVlanIdListType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX BITS { wildCard(0), vlan1(1), vlan2(2), vlan3(3), vlan4(4), vlan5(5), vlan6(6), vlan7(7), vlan8(8), vlan9(9), vlan10(10), vlan11(11), vlan12(12), vlan13(13), vlan14(14), vlan15(15), vlan16(16), vlan17(17), vlan18(18), vlan19(19), vlan20(20), vlan21(21), vlan22(22), vlan23(23), vlan24(24), vlan25(25) } SheDhcpFloodingType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To configure the flooding of DHCP and/or PPPoE packets per vlan." SYNTAX INTEGER { enableFloodingDhcpAndPppoE(1), disableFloodingDhcpAndPppoE(2), enableFloodingDhcpOnly(3), enableFloodingPppoEOnly(4) } SheBridgeMaxIpAddressType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used inside bridge configuration for maxIp support." SYNTAX Unsigned32 (1..64) SheBridgeIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used as type defintion for BridgeBase and BridgePort CircuitId and RemoteId configuration. The following predefined types are available: %B -> portstring (like 'iuslot'/'iuport') %M -> mac address %N -> NodeId or Hostname (only if individuell NodeIdentifier not available) %T -> (dsl) line type (adsl, vdsl, shdsl) %S -> slot %P -> port %R -> subport/servicename or Vlan ID (only if subport/servicename not available) %V -> unique vcc id %b -> unique bridgeport id %p -> vpi number %c -> vci number %E -> ethernet priority %v -> vlan ID %s -> slot number as printed on shelf %t -> tc-layer type (atm, eth) Useful separation characters: space . , ; / - : * It is also allowed to place free text. Predefined types will be replaced by NE with the requested information. The maximum total length of a resulting Id string is still 63 byte (overlaps will be cut off)!" SYNTAX OCTET STRING (SIZE (0..63)) -- -- Node definitions -- sheBridge OBJECT IDENTIFIER ::= { sheBridgeMib 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1 sheBridgeBase OBJECT IDENTIFIER ::= { sheBridge 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.1 sheBridgeBaseMode OBJECT-TYPE SYNTAX SheBridgeModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The general operating mode of the bridge." ::= { sheBridgeBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.2 sheBridgeBaseTaggingMode OBJECT-TYPE SYNTAX SheBridgeTaggingModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The general tagging mode of the bridge." ::= { sheBridgeBase 2 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.3 sheBridgeBaseMirrorPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Mirror port of the system. That is a sheBridgePortIndex and it could only be used on ports with bridgePortUsage = uplink. This value should be 0 if no mirror-port is configured in the system" DEFVAL { 0 } ::= { sheBridgeBase 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.4 sheBridgeBaseOuterPVID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The default PVID of the outer Vlan used by the switch fabric in case of doubleTag-Mode or if a frame with priority tag is received and no other rule to change the vlan tag will match." ::= { sheBridgeBase 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.5 sheBridgeBaseOuterPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The default .1p-Priority of the outer vlan in case of doubleTag-Mode. " ::= { sheBridgeBase 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.6 sheBridgeBaseCircuitIdFormat OBJECT-TYPE SYNTAX SheBridgeIdType MAX-ACCESS read-only STATUS current DESCRIPTION "The default value should be: '%N %t %S/%P:%p.%c' -> when ATM/DSL is used '%N %t %S/%P:%v' -> when Ethernet/DSL is used It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!" ::= { sheBridgeBase 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.7 sheBridgeBaseSharedVlanLearning OBJECT-TYPE SYNTAX SheBridgeSharedVlanLearningType MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the feature SharedVlanLearning in the NE." DEFVAL { 0 } ::= { sheBridgeBase 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.8 sheBridgeBaseRemoteIdFormat OBJECT-TYPE SYNTAX SheBridgeIdType MAX-ACCESS read-only STATUS current DESCRIPTION "The default value is: '%M' It is up to the custoumer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!" ::= { sheBridgeBase 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.9 sheBridgeBaseStagTPID OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TPID of the service tag if doubleTag is enabled." ::= { sheBridgeBase 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.10 sheBridgeBaseMacAntiSpoofing OBJECT-TYPE SYNTAX SheBridgeMacAntiSpoofingType MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the feature MacAntiSpoofing in the NE." ::= { sheBridgeBase 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.11 sheBridgeBaseRoutingMode OBJECT-TYPE SYNTAX SheBridgeRoutingModeType MAX-ACCESS read-only STATUS current DESCRIPTION "residential or unrestricted the feature Routing Mode of BridgeBase in the NE." ::= { sheBridgeBase 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.12 sheBridgeBaseMaxHostName OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "the maximum length of hostname for circuit-id or remote-id." ::= { sheBridgeBase 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.13 sheBridgeBaseDlfFilter OBJECT-TYPE SYNTAX SheBridgeDlfFilterType MAX-ACCESS read-only STATUS current DESCRIPTION "The policy of DLF (destination lookup failur) unicast packets from uplink. Enable DLF filter -> destination-mac unknown unicast towards subscriber ports blocked Disable DLF filter -> destination-mac unknown unicast towards subscriber ports allowed default:enable " ::= { sheBridgeBase 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.14 sheBridgeBaseUnknownMuticastFilter OBJECT-TYPE SYNTAX SheBridgeUnknownMulticastFilterType MAX-ACCESS read-only STATUS current DESCRIPTION "The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction " ::= { sheBridgeBase 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.15 sheBridgeBaseIpoaArpReqInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router. " ::= { sheBridgeBase 15 } sheBridgeBaseMaxIpUNI OBJECT-TYPE SYNTAX SheBridgeMaxIpAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8." DEFVAL { 64 } ::= { sheBridgeBase 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2 sheBridgeBaseControl OBJECT IDENTIFIER ::= { sheBridge 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.1 sheBridgeBaseControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setBridgeMode: sheBridgeBaseControlMode setBridgeTaggingMode: sheBridgeBaseControlTaggingMode setBridgeMirrorPort: sheBridgeBaseControlMirrorPort setBridgeOuterVlanDefaults: sheBridgeBaseControlOuterPVID sheBridgeBaseControlOuterPriority setBridgeCircuitIdFormat: sheBridgeBaseControlCircuitIdFormat setBridgeSharedVlanLearning: sheBridgeBaseControlSharedVlanLearning setBridgeRemoteIdFormat: sheBridgeBaseControlRemoteIdFormat setBridgeStagTPID: sheBridgeBaseControlStagTPID setBridgeMacAntiSpoofing: sheBridgeBaseControlMacAntiSpoofing setBridgeRoutingMode: sheBridgeBaseControlRoutingMode setBridgeMaxHostName: sheBridgeBaseControlMaxHostName setBridgeDlfFilter: sheBridgeBaseControlDlfFilter setBridgeUnknownMulticastFilter: sheBridgeBaseControlUnknownMulticastFilter setBridgeIpoaArpReqInterval: sheBridgeBaseControlIpoaArpReqInterval" ::= { sheBridgeBaseControl 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.2 sheBridgeBaseControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgeBaseControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.3 sheBridgeBaseControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheBridgeBaseControl 3 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.4 sheBridgeBaseControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgeBaseControl 4 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.5 sheBridgeBaseControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgeBaseControl 5 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.6 sheBridgeBaseControlMode OBJECT-TYPE SYNTAX SheBridgeModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Set the basic bridge mode." ::= { sheBridgeBaseControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.7 sheBridgeBaseControlTaggingMode OBJECT-TYPE SYNTAX SheBridgeTaggingModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Set the basic tagging mode." ::= { sheBridgeBaseControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.8 sheBridgeBaseControlMirrorPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the mirror port." ::= { sheBridgeBaseControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.9 sheBridgeBaseControlOuterPVID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The PVID of the outer Vlan in case of doubleTag-Mode." ::= { sheBridgeBaseControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.10 sheBridgeBaseControlOuterPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The default .1p-Priority of the outer vlan in case of doubleTag-Mode. " ::= { sheBridgeBaseControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.11 sheBridgeBaseControlCircuitIdFormat OBJECT-TYPE SYNTAX SheBridgeIdType MAX-ACCESS read-write STATUS current DESCRIPTION "It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!" ::= { sheBridgeBaseControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.12 sheBridgeBaseControlSharedVlanLearning OBJECT-TYPE SYNTAX SheBridgeSharedVlanLearningType MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the feature SharedVlanLearning in the NE." ::= { sheBridgeBaseControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.13 sheBridgeBaseControlRemoteIdFormat OBJECT-TYPE SYNTAX SheBridgeIdType MAX-ACCESS read-write STATUS current DESCRIPTION "It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!" ::= { sheBridgeBaseControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.14 sheBridgeBaseControlStagTPID OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TPID of the service tag if doubleTag is enabled" ::= { sheBridgeBaseControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.15 sheBridgeBaseControlMacAntiSpoofing OBJECT-TYPE SYNTAX SheBridgeMacAntiSpoofingType MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the feature MacAntiSpoofing in the NE." ::= { sheBridgeBaseControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.16 sheBridgeBaseControlRoutingMode OBJECT-TYPE SYNTAX SheBridgeRoutingModeType MAX-ACCESS read-write STATUS current DESCRIPTION "residential or unrestricted the feature Routing Mode of BridgeBase in the NE." ::= { sheBridgeBaseControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.17 sheBridgeBaseControlMaxHostName OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "the maximum length of hostname for circuit-id or remote-id." ::= { sheBridgeBaseControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.18 sheBridgeBaseControlDlfFilter OBJECT-TYPE SYNTAX SheBridgeDlfFilterType MAX-ACCESS read-write STATUS current DESCRIPTION "The policy of DLF unicast packets from uplink." ::= { sheBridgeBaseControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.19 sheBridgeBaseControlUnknownMulticastFilter OBJECT-TYPE SYNTAX SheBridgeUnknownMulticastFilterType MAX-ACCESS read-write STATUS current DESCRIPTION "The policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream direction " ::= { sheBridgeBaseControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.20 sheBridgeBaseControlIpoaArpReqInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router. " ::= { sheBridgeBaseControl 20 } sheBridgeBaseControlMaxIpUNI OBJECT-TYPE SYNTAX SheBridgeMaxIpAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8. Not configurable with current release!" ::= { sheBridgeBaseControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3 sheBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridgePort-Table." ::= { sheBridge 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1 sheBridgePortEntry OBJECT-TYPE SYNTAX SheBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for every bridgePort of the system." INDEX { sheBridgePortIndex } ::= { sheBridgePortTable 1 } SheBridgePortEntry ::= SEQUENCE { sheBridgePortIndex Unsigned32, sheSubLayerIndex InterfaceIndex, sheSubLayerCircuit Integer32, sheBridgePortPVID Integer32, sheBridgePortPriority Integer32, sheBridgePortUsage SheBridgePortUsageType, sheBridgePortHostConfigurationProtocol SheHostConfigurationProtocolType, sheBridgePortCircuitId OCTET STRING, sheBridgePortMaxLearnPermitCount Integer32, sheBridgePortMcastGroupPackageList OCTET STRING, sheBridgePortMode SheBridgePortModeType, sheBridgePortTaggingMode SheBridgePortTaggingModeType, sheBridgePortRemoteId OCTET STRING, sheBridgePortInnerPVID Integer32, sheBridgePortReplaceVlanTag Integer32, sheBridgePortInnerPriority Integer32, sheBridgePortIpoaProviderRouterIpAddress IpAddress, sheBridgePortPppoaSessionId Integer32, sheBridgePortMcastMaxJoinedGroup Unsigned32, sheBridgePortMcastLeaveMode SheMcastLeaveMode, sheBridgePortMcastEHTMode SheEnableType, sheBridgePortIgmpSubscriberAccessMode SheBridgePortIgmpSubscriberAccessModeType, sheBridgePortInnerPriorityOption SheBridgePortPriorityOptionType, sheBridgePortOuterPriorityOption SheBridgePortPriorityOptionType, sheBridgePortPriorityMapIndex Unsigned32, sheBridgePortIpAddressPermitCount SheBridgeMaxIpAddressType, sheBridgePortMatEnabled TruthValue, sheBridgePortIpAsMode SheBridgePortIpAsModeType, sheBridgePortEtypeVlanMapProfilePtr Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.1 sheBridgePortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A bridgePort-identifier." ::= { sheBridgePortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.2 sheSubLayerIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "IfIndex of the underlaying Interface in the interface-table, Also LAG-bridgePorts will be modeled in the interface table. " ::= { sheBridgePortEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.3 sheSubLayerCircuit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Only used in case the bridgePort represents a PVC, otherwise equal 0. This value represent the the index for sheAdslVccTpTable, sheXdslVccTpTable or sheShdslVccTpTable depending on ifType of underlaying physical interface. This index was build by the following rule: index = (SubLayerIndex << 4) + Vcc-Number Lowest value for she is 0x0651 (ifIndex = 101 and Vcc-Number 1). Highest value for she is 0x6EC8 (ifIndex = 1772 and Vcc-Number 8). " ::= { sheBridgePortEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.4 sheBridgePortPVID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The PVID of the port. Possible range is 1-4093 for subscriber ports. This value points to the corresponding vlanIndex of the sheVlanTable. The default value for subscriber bridgePorts is the ifIndex of the underlaying physical interface (sublayerindex). Uplink and LAG bridgePorts use PVID 1 as default." ::= { sheBridgePortEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.5 sheBridgePortPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Default Priority of the bridgePort." DEFVAL { 0 } ::= { sheBridgePortEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.6 sheBridgePortUsage OBJECT-TYPE SYNTAX SheBridgePortUsageType MAX-ACCESS read-only STATUS current DESCRIPTION "defaults: Dsl PVC : subscriber Adsl special: vccAggregatorNotUsed Uplink : upLink Lag : notUsed If upLink-Port is aggregated, the upLink state moves to aggregated and the Lag moves to uplink. If a physical bonding is used (Shdsl 4wire/6wire/8wire done over shdsl configuration, m-pair bonding), the master bridgeport changes his usage to physbondedSubscriber and all other members to notUsed. If a gbond bonding is used (via she-bonding-mib configuration), the master bridgeport-entry of the new bonding port changes his usage to bondingSubscriber and all other members of bonding port to bondingNotUsed. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes." ::= { sheBridgePortEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.7 sheBridgePortHostConfigurationProtocol OBJECT-TYPE SYNTAX SheHostConfigurationProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). useDHCPandPPPoE(3)." ::= { sheBridgePortEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.8 sheBridgePortCircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseCircuitIdFormat will be used." ::= { sheBridgePortEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.9 sheBridgePortMaxLearnPermitCount OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dynamic learned Mac addresses per port. The valid configuration range for dynamic MacAddress learning is 1..2147483647 (0x7fffffff). A value of -1 disable the MacAddress limitation (default for uplink) -> 'No Limit'. A value of 0 disable the dynamic MacAddress learning -> 'Disabled'. Static FdbTable entrys possible. Additional limitations depending on the used CXU or IU type are possible. The default setting for subscriber ports is 16. Note: Syntax modified with R2.8 BFR 2.0. " ::= { sheBridgePortEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.10 sheBridgePortMcastGroupPackageList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "That is a list of allowed corresponding indices of the sheIgmpMcastGroupPackageTable for this subscriber. Each index has 16 bit. If no packet is assigned, the string has 0 length. " ::= { sheBridgePortEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.11 sheBridgePortMode OBJECT-TYPE SYNTAX SheBridgePortModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Mode of this bridgeport useIpoE, useIpoA, usePPPoA or useAuto. useIpoE is the default setting. This mode will also support PPPoE. useIPoA is only possible for IU_ADSL or IU_SHDSL boards. If no MacAddress is configured in the corresponding MacProfileTable-entry, the NE will autogenerate a own value. In case of usePPPoA, the IU will translate the PPPoA protocol to PPPoE. This configuration is only valid for bridgeports with SubLayerIndex placed on IU_ADSL72 with IFX chipset! A SrcMac-address in sheBridgeIUProfileTable has to be configured for the IU where these port is placed on. The configuration useAuto forces the IU to start a autodetection mode for supporting PPPoA or PPPoE. " DEFVAL { 0 } ::= { sheBridgePortEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.12 sheBridgePortTaggingMode OBJECT-TYPE SYNTAX SheBridgePortTaggingModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Tagging modes for bridgePort's. This modes are only valid for received frames. Tagging of transmitted frames depends on the bridgeBase-tagging mode and on the vlan-membership. off(0) Untagged frames are tagged with PVID and forwarded. Tagged frames are forwarded unchanged. That is the default value for uplink port's and should not be changed. tagged(1) Frames tagged with the configured VIDs are forwarded unchanged. Untagged frames and frames with unknown VIDs are dropped. Check sheBridgePortReplaceTag value if a received tag should be replaced by PVID. untagged(2) Untagged frames are tagged with PVID and forwarded. Tagged frames are dropped. That is the default value for subscriber port's. NOTE: SHE releases older then R2.5 will only support modes (0) and (1). " ::= { sheBridgePortEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.13 sheBridgePortRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Needed for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseRemoteIdFormat will be used." ::= { sheBridgePortEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.14 sheBridgePortInnerPVID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is 1." ::= { sheBridgePortEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.15 sheBridgePortReplaceVlanTag OBJECT-TYPE SYNTAX Integer32 (0..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature. Only valid if the Bridgeport is running tagged(1) mode - otherwise must be zero. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted! " DEFVAL { 0 } ::= { sheBridgePortEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.16 sheBridgePortInnerPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is 0." DEFVAL { 0 } ::= { sheBridgePortEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.17 sheBridgePortIpoaProviderRouterIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPoA provider edge router's ip address for this bridgePort. 0.0.0.0 is also a valid setting and force the NE together with a similar entry in sheArpFixedIpAddressTable to retrieve the needed information automatically." ::= { sheBridgePortEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.18 sheBridgePortPppoaSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The session id from a PPP server is for the PPPoA session." ::= { sheBridgePortEntry 18 } sheBridgePortMcastMaxJoinedGroup OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..32 | 255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. This configuration is only valid for bridgeports with usage 'subscriber'." DEFVAL { 10 } ::= { sheBridgePortEntry 19 } sheBridgePortMcastLeaveMode OBJECT-TYPE SYNTAX SheMcastLeaveMode MAX-ACCESS read-only STATUS current DESCRIPTION "If normal leave is enabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If fast leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. New with R2.8: If ehtMode ('explicit host tracking') is enabled, the multicaststream will only be deleted from FDB if all members of this stream has send her leave." DEFVAL { ethMode } ::= { sheBridgePortEntry 20 } sheBridgePortMcastEHTMode OBJECT-TYPE SYNTAX SheEnableType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Enables or disables the 'explicit host tracking' function. If enabled and fastleave-mode is also running, the multicaststream will only be deleted from FDB if all members of this stream has send her leave. Note: Functionality bundled in McastLeaveMode with SHE R2.8." DEFVAL { enable } ::= { sheBridgePortEntry 21 } sheBridgePortIgmpSubscriberAccessMode OBJECT-TYPE SYNTAX SheBridgePortIgmpSubscriberAccessModeType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification." ::= { sheBridgePortEntry 22 } sheBridgePortInnerPriorityOption OBJECT-TYPE SYNTAX SheBridgePortPriorityOptionType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter configures the handling of the inner vlan tag in the doubleTagged scenario. In singleTagged Mode, this parameter definition is not used. If tagged frames are received set the .1p priority bits of this tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortInnerPriority) If a tag is added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortInnerPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortInnerPriority) New parameters with SHE R2.7 Expanded with R2.8." DEFVAL { userTag } ::= { sheBridgePortEntry 23 } sheBridgePortOuterPriorityOption OBJECT-TYPE SYNTAX SheBridgePortPriorityOptionType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter configures the handling of the outer vlan tag in the doubleTagged and singleTagged scenario. doubleTagged Scenario: If tagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> copy .1p priority from the assigned inner .1p priority (inner to outer) force(3) -> per port configured .1p (sheBridgePortPriority) If two tag's are added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) singleTagged Scenario: If tagged frames are received set the .1p priority bits of the tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortPriority) If untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) New parameters with SHE R2.7 Expanded with R2.8. " DEFVAL { force } ::= { sheBridgePortEntry 24 } sheBridgePortPriorityMapIndex OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the IU specific assignment via sheBridgeIUDscpPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IUs could only support ONE profile for all ports were these mapping should be used!! New parameter with SHE R2.8." DEFVAL { 0 } ::= { sheBridgePortEntry 25 } sheBridgePortIpAddressPermitCount OBJECT-TYPE SYNTAX SheBridgeMaxIpAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of possible IpAddresses per BridgePort. The assignment could be done via DHCP or fixedIpAddress configuration. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Additional restrictions could be possible in case of using IpAntispoofing feature. New parameter with SHE R2.8." DEFVAL { 8 } ::= { sheBridgePortEntry 26 } sheBridgePortMatEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the MAC address translation feature on bridgePort base. New parameter with SHE R2.8." DEFVAL { false } ::= { sheBridgePortEntry 27 } sheBridgePortIpAsMode OBJECT-TYPE SYNTAX SheBridgePortIpAsModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8. " DEFVAL { offIpAs } ::= { sheBridgePortEntry 28 } sheBridgePortEtypeVlanMapProfilePtr OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. Note: The bridgeport has to be untagged member of the mapped vlan, assigned via these profile. New parameter with SHE R2.8." DEFVAL { 0 } ::= { sheBridgePortEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4 sheBridgePortControl OBJECT IDENTIFIER ::= { sheBridge 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.1 sheBridgePortControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setBridgePortVLANDefaults: sheBridgePortControlIndex sheBridgePortControlPVID sheBridgePortControlPriority setBridgePortUsage: sheBridgePortControlIndex sheBridgePortControlUsage setBridgePortHostConfigurationProtocol: sheBridgePortControlIndex sheBridgePortControlHostConfigurationProtocol sheBridgePortControlCircuitId setBridgePortMaxLearnPermitCount: sheBridgePortControlIndex sheBridgePortControlMaxLearnPermitCount setBridgePortMcastGroupPackageList: sheBridgePortControlIndex sheBridgePortControlMcastGroupPackageList setBridgePortFeature: sheBridgePortControlIndex sheBridgePortControlMode sheBridgePortControlTaggingMode sheBridgePortControlReplaceTag setBridgePortCircuitId: sheBridgePortControlIndex sheBridgePortControlCircuitId setBridgePortRemoteId: sheBridgePortControlIndex sheBridgePortControlRemoteId clearBridgePortCircuitId: sheBridgePortControlIndex clearBridgePortRemoteId: sheBridgePortControlIndex setBridgePortInnerPVID: sheBridgePortControlIndex sheBridgePortControlInnerPVID setBridgePortInnerPriority: sheBridgePortControlIndex sheBridgePortControlInnerPriority setBridgePortIpoaProviderRouterIpAddress: sheBridgePortControlIndex sheBridgePortControlIpoaProviderRouterIpAddress setBridgePortMcastParameter: sheBridgePortControlIndex sheBridgePortControlMcastMaxJoinedGroup sheBridgePortControlMcastLeaveMode sheBridgePortControlMcastEHTMode (obsolete with R2.8) setBridgePortIgmpSubscriberAccessMode sheBridgePortControlIndex sheBridgePortControlIgmpSubscriberAccessMode New with R2.7: setBridgePortPriorityOptions sheBridgePortControlIndex sheBridgePortControlInnerPriorityOption sheBridgePortControlOuterPriorityOption sheBridgePortControlPriorityMapIndex (new with R2.8) New with R2.8: setBridgePortMatEnabled sheBridgePortControlIndex sheBridgePortControlMatEnabled setBridgePortIpAddressPermitCount sheBridgePortControlIndex sheBridgePortControlIpAddressPermitCount setBridgePortIpAsMode (165) sheBridgePortControlIndex sheBridgePortControlIpAsMode ->sheBridgePortIpAsModeModified setBridgePortEtypeVlanMapping (166) sheBridgePortControlIndex sheBridgePortControlEtypeVlanMapProfilePtr ->sheBridgePortEtypeVlanMappingModified" ::= { sheBridgePortControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.2 sheBridgePortControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the bridgePort to be configured." ::= { sheBridgePortControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.3 sheBridgePortControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgePortControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.4 sheBridgePortControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheBridgePortControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.5 sheBridgePortControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgePortControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.6 sheBridgePortControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgePortControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.7 sheBridgePortControlPVID OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The PVID for that port." ::= { sheBridgePortControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.8 sheBridgePortControlPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default port priority." ::= { sheBridgePortControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.9 sheBridgePortControlUsage OBJECT-TYPE SYNTAX SheBridgePortUsageType MAX-ACCESS read-write STATUS current DESCRIPTION "Only the values uplink, cascading, and subcascading could be interchanged. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes. All other changes will be done by NE automatically based on other configurations." ::= { sheBridgePortControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.10 sheBridgePortControlHostConfigurationProtocol OBJECT-TYPE SYNTAX SheHostConfigurationProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "Used host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). " ::= { sheBridgePortControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.11 sheBridgePortControlMaxLearnPermitCount OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. Note: Syntax modified with R2.8 BFR 2.0. " ::= { sheBridgePortControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.12 sheBridgePortControlMcastGroupPackageList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "This bridgePort is user of this MCastGroup-Package. " ::= { sheBridgePortControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.13 sheBridgePortControlCircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheBridgePortControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.14 sheBridgePortControlMode OBJECT-TYPE SYNTAX SheBridgePortModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheBridgePortControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.15 sheBridgePortControlTaggingMode OBJECT-TYPE SYNTAX SheBridgePortTaggingModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheBridgePortControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.16 sheBridgePortControlRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheBridgePortControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.17 sheBridgePortControlInnerPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is the bridgePortIndex +1." ::= { sheBridgePortControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.18 sheBridgePortControlReplaceVlanTag OBJECT-TYPE SYNTAX Integer32 (0..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a Vlan-Tag which should be replaced by PVID. Check table entry for details. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted!" ::= { sheBridgePortControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.19 sheBridgePortControlInnerPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is the '0'." ::= { sheBridgePortControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.20 sheBridgePortControlIpoaProviderRouterIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheBridgePortControl 20 } sheBridgePortControlMcastMaxJoinedGroup OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..32 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. " ::= { sheBridgePortControl 21 } sheBridgePortControlMcastLeaveMode OBJECT-TYPE SYNTAX SheMcastLeaveMode MAX-ACCESS read-write STATUS current DESCRIPTION "Modify subscriber leave mode." ::= { sheBridgePortControl 22 } sheBridgePortControlMcastEHTMode OBJECT-TYPE SYNTAX SheEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables the 'explicit host tracking' function. NOTE: Functionality bundled in McastLeaveMode with SHE R2.8. Will not longer used by R2.8." ::= { sheBridgePortControl 23 } sheBridgePortControlIgmpSubscriberAccessMode OBJECT-TYPE SYNTAX SheBridgePortIgmpSubscriberAccessModeType MAX-ACCESS read-write STATUS obsolete DESCRIPTION "When sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification." ::= { sheBridgePortControl 24 } sheBridgePortControlInnerPriorityOption OBJECT-TYPE SYNTAX SheBridgePortPriorityOptionType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheBridgePortControl 25 } sheBridgePortControlOuterPriorityOption OBJECT-TYPE SYNTAX SheBridgePortPriorityOptionType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheBridgePortControl 26 } sheBridgePortControlPriorityMapIndex OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheBridgePortControl 27 } sheBridgePortControlIpAddressPermitCount OBJECT-TYPE SYNTAX SheBridgeMaxIpAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table description." ::= { sheBridgePortControl 28 } sheBridgePortControlMatEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the MAC address translation feature on bridgePort base." ::= { sheBridgePortControl 29 } sheBridgePortControlIpAsMode OBJECT-TYPE SYNTAX SheBridgePortIpAsModeType MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8." ::= { sheBridgePortControl 30 } sheBridgePortControlEtypeVlanMapProfilePtr OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. New parameter with SHE R2.8." ::= { sheBridgePortControl 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5 sheBridgePortNotifications OBJECT IDENTIFIER ::= { sheBridge 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.1 sheBridgeBaseParamModified NOTIFICATION-TYPE OBJECTS { sheBridgeBaseCircuitIdFormat, sheBridgeBaseControlTimeStamp, sheBridgeBaseMode, sheBridgeBaseTaggingMode, sheBridgeBaseMirrorPort, sheBridgeBaseOuterPVID, sheBridgeBaseOuterPriority, sheBridgeBaseSharedVlanLearning, sheBridgeBaseRemoteIdFormat, sheBridgeBaseStagTPID, sheBridgeBaseRoutingMode, sheBridgeBaseMacAntiSpoofing, sheBridgeBaseMaxHostName, sheBridgeBaseDlfFilter, sheBridgeBaseUnknownMuticastFilter, sheBridgeBaseIpoaArpReqInterval } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.2 sheBridgePortCreated NOTIFICATION-TYPE OBJECTS { sheBridgePortControlTimeStamp, sheSubLayerIndex, sheSubLayerCircuit, sheBridgePortPVID, sheBridgePortPriority, sheBridgePortUsage, sheBridgePortHostConfigurationProtocol, sheBridgePortCircuitId, sheBridgePortMaxLearnPermitCount, sheBridgePortMode, sheBridgePortTaggingMode } STATUS current DESCRIPTION "A new bridgePort was created." ::= { sheBridgePortNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.3 sheBridgePortDeleted NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp } STATUS current DESCRIPTION "A bridgePort was deleted." ::= { sheBridgePortNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.4 sheBridgePortVlanDefaultsModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlPVID, sheBridgePortControlPriority } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.5 sheBridgePortUsageModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlUsage } STATUS current DESCRIPTION "BridgePort usage modified." ::= { sheBridgePortNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.6 sheBridgePortHostConfigurationProtocolModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlHostConfigurationProtocol, sheBridgePortControlCircuitId } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.7 sheBridgePortMaxLearnPermitCountModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlMaxLearnPermitCount } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.8 sheBridgePortMcastGroupPackageListModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlMcastGroupPackageList } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.9 sheBridgePortFeatureModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlMode, sheBridgePortControlTaggingMode, sheBridgePortControlReplaceVlanTag } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.10 sheBridgeMacProfileSrcMacAddressModified NOTIFICATION-TYPE OBJECTS { sheBridgeMacProfileControlIndex, sheBridgeMacProfileControlTimeStamp, sheBridgeMacProfileControlSrcMacAddress } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgePortNotifications 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.11 sheBridgePortCircuitIdModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlCircuitId } STATUS current DESCRIPTION "send trap when bridgeport circuitid is set." ::= { sheBridgePortNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.12 sheBridgePortRemoteIdModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlRemoteId } STATUS current DESCRIPTION "send trap when bridgeport remoteid is set." ::= { sheBridgePortNotifications 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.13 sheBridgePortCircuitIdCleared NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex } STATUS current DESCRIPTION "send trap when bridgeport circuitid is cleared." ::= { sheBridgePortNotifications 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.14 sheBridgePortRemoteIdCleared NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex } STATUS current DESCRIPTION "send trap when bridgeport remoteid is cleared." ::= { sheBridgePortNotifications 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.15 sheBridgePortInnerPVIDModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlInnerPVID } STATUS current DESCRIPTION "send trap when bridgeport inner PVID is set." ::= { sheBridgePortNotifications 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.16 sheBridgePortInnerPriorityModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlInnerPriority } STATUS current DESCRIPTION "send trap when bridgeport inner priority is set." ::= { sheBridgePortNotifications 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.17 sheBridgePortIpoaProviderRouterIpAddressModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlIpoaProviderRouterIpAddress } STATUS current DESCRIPTION "send trap when bridgeport IPoA provider edge router's ip address is set." ::= { sheBridgePortNotifications 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.18 sheBridgePortMcastParameterModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlMcastMaxJoinedGroup, sheBridgePortControlMcastLeaveMode, sheBridgePortControlMcastEHTMode } STATUS current DESCRIPTION "send trap when bridgeport mcast parameter is set." ::= { sheBridgePortNotifications 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.19 sheBridgePortIgmpSubscriberAccessModeModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlIgmpSubscriberAccessMode } STATUS obsolete DESCRIPTION "send trap when bridgeport igmp subscriber Access mode is set." ::= { sheBridgePortNotifications 19 } setBridgePortPriorityOptionsModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlPriorityMapIndex, sheBridgePortControlInnerPriorityOption, sheBridgePortControlOuterPriorityOption } STATUS current DESCRIPTION "send trap when configuration of PriorityOptions parameters was modified" ::= { sheBridgePortNotifications 20 } sheBridgePortMatEnabledModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlMatEnabled } STATUS current DESCRIPTION "send trap when configuration of MatEnabled on BridgePort base was modified" ::= { sheBridgePortNotifications 21 } sheBridgePortIpAddressPermitCountModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlIpAddressPermitCount } STATUS current DESCRIPTION "send trap when configuration of permit count for DHCP was modified" ::= { sheBridgePortNotifications 22 } sheBridgePortPrioMapEntryCreated NOTIFICATION-TYPE OBJECTS { sheBridgePortPrioMapControlIndex, sheBridgePortPrioMapControlTimeStamp } STATUS current DESCRIPTION "a complete entry (64 dscp entries) with a default mapping is created" ::= { sheBridgePortNotifications 23 } sheBridgePortPrioMapEntryDeleted NOTIFICATION-TYPE OBJECTS { sheBridgePortPrioMapControlIndex, sheBridgePortPrioMapControlTimeStamp } STATUS current DESCRIPTION "a complete entry (64 dscp entries) is deleted" ::= { sheBridgePortNotifications 24 } sheBridgePortPrioMapEntryModified NOTIFICATION-TYPE OBJECTS { sheBridgePortPrioMapControlIndex, sheBridgePortPrioMapControlTimeStamp, sheBridgePortPrioMapControlDscp, sheBridgePortPrioMapControlPrio } STATUS current DESCRIPTION "a single dscp entry is modified" ::= { sheBridgePortNotifications 25 } sheBridgePortExtMCastParameterModified NOTIFICATION-TYPE OBJECTS { sheBridgePortMCastControlIndex, sheBridgePortMCastControlTimeStamp, sheBridgePortMCastControlBandwithLimit, sheBridgePortMCastControlMinUCBandwithLimit, sheBridgePortMCastControlMaxJoinedNonPremiumGroup } STATUS current DESCRIPTION "send trap when bridgeport R2.8 mcast parameter are set." ::= { sheBridgePortNotifications 28 } sheEtypeVlanMapProfEntryCreated NOTIFICATION-TYPE OBJECTS { sheBridgePortEtypeVlanMapControlTimeStamp, sheBridgePortEtypeVlanMapCtrlProfIndex, sheBridgePortEtypeVlanMapCtrlEthertype, sheBridgePortEtypeVlanMapCtrlVlanId, sheBridgePortEtypeVlanMapCtrlPriority } STATUS current DESCRIPTION "A new sheBridgePortEtypeVlanMapProfile was created in the NE. New with SHE R2.8." ::= { sheBridgePortNotifications 29 } sheEtypeVlanMapProfEntryModified NOTIFICATION-TYPE OBJECTS { sheBridgePortEtypeVlanMapControlTimeStamp, sheBridgePortEtypeVlanMapCtrlProfIndex, sheBridgePortEtypeVlanMapCtrlEthertype, sheBridgePortEtypeVlanMapCtrlVlanId, sheBridgePortEtypeVlanMapCtrlPriority } STATUS current DESCRIPTION "A sheBridgePortEtypeVlanMapProfile was modified in the NE. New with SHE R2.8." ::= { sheBridgePortNotifications 30 } sheEtypeVlanMapProfEntryDeleted NOTIFICATION-TYPE OBJECTS { sheBridgePortEtypeVlanMapControlTimeStamp, sheBridgePortEtypeVlanMapCtrlProfIndex } STATUS current DESCRIPTION "A sheBridgePortEtypeVlanMapProfile was deleted in the NE. New with SHE R2.8." ::= { sheBridgePortNotifications 31 } sheBridgePortIpAsModeModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlIpAsMode } STATUS current DESCRIPTION "The bridgePort specific IpAs mode was modified." ::= { sheBridgePortNotifications 32 } sheBridgePortEtypeVlanMappingModified NOTIFICATION-TYPE OBJECTS { sheBridgePortControlIndex, sheBridgePortControlTimeStamp, sheBridgePortControlEtypeVlanMapProfilePtr } STATUS current DESCRIPTION "The bridgePort specific EthertypeVlanMapping profile assignment was modified." ::= { sheBridgePortNotifications 33 } sheBridgeExtResidentialModeModified NOTIFICATION-TYPE OBJECTS { sheBridgeExtResidentialControlPortIndex, sheBridgeExtResidentialControlTimeStamp, sheBridgeExtResidentialControlMode } STATUS current DESCRIPTION "The port specific ext-residential mode was modified." ::= { sheBridgePortNotifications 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6 sheBridgeMacProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgeMacProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sheBridge 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1 sheBridgeMacProfileEntry OBJECT-TYPE SYNTAX SheBridgeMacProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Needed for feature IpoA. Configure the used Mac-Address if this bridgeport is running in IpoA-Mode." INDEX { sheBridgePortIndex } ::= { sheBridgeMacProfileTable 1 } SheBridgeMacProfileEntry ::= SEQUENCE { sheBridgeMacProfileSrcMacAddress OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1.1 sheBridgeMacProfileSrcMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The used Src-MacAddress if this port is running in IpoA - mode. If address 000000 is set, the NE will autogenerate a valid mac-address." ::= { sheBridgeMacProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7 sheBridgeMacProfileControl OBJECT IDENTIFIER ::= { sheBridge 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.1 sheBridgeMacProfileControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setBridgeMacProfileSrcMacAddress: sheBridgeMacProfileControlIndex sheBridgeMacProfileControlSrcMacAddress" ::= { sheBridgeMacProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.2 sheBridgeMacProfileControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the bridgePort to be configured." ::= { sheBridgeMacProfileControl 2 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.3 sheBridgeMacProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgeMacProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.4 sheBridgeMacProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheBridgeMacProfileControl 4 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.5 sheBridgeMacProfileControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgeMacProfileControl 5 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.6 sheBridgeMacProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgeMacProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.7 sheBridgeMacProfileControlSrcMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheBridgeMacProfileControl 7 } -- Contain needed bridge specific IU configurations. sheBridgeIUConfig OBJECT IDENTIFIER ::= { sheBridge 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6 sheBridgeIUProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgeIUProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { sheBridgeIUConfig 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1 sheBridgeIUProfileEntry OBJECT-TYPE SYNTAX SheBridgeIUProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Needed to configure some IU specific settings. Index should be the entPhysicalIndex of the IU." INDEX { entPhysicalIndex } ::= { sheBridgeIUProfileTable 1 } SheBridgeIUProfileEntry ::= SEQUENCE { sheBridgeIUPPPoASrcMacAddress OCTET STRING, sheBridgeIUProfileUsedMATBasis SheBridgeIUProfileUsedMATBasisType, sheBridgeIUReplaceVlanTag Integer32, sheBridgeIUDscpPriorityMapIndex Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.1 sheBridgeIUPPPoASrcMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The used Src-MacAddress for this IU if one of her port's is running in PPPoA - mode. The PPPoA session is translated to PPPoE. This configuration should be made before a port could be switched to PPPoA - mode." ::= { sheBridgeIUProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.2 sheBridgeIUProfileUsedMATBasis OBJECT-TYPE SYNTAX SheBridgeIUProfileUsedMATBasisType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8." DEFVAL { useMATperVlan } ::= { sheBridgeIUProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.15 sheBridgeIUReplaceVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport." DEFVAL { 0 } ::= { sheBridgeIUProfileEntry 3 } sheBridgeIUDscpPriorityMapIndex OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the port specific assignment via sheBridgePortPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IUs could only support ONE profile for all ports were these mapping should be used!! New parameter with SHE R2.8." DEFVAL { 0 } ::= { sheBridgeIUProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.7 sheBridgeIUProfileControl OBJECT IDENTIFIER ::= { sheBridgeIUConfig 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.1 sheBridgeIUProfileControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setBridgeIUProfilePPPoASrcMacAddress (131): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlPPPoASrcMacAddress New with R2.8: setBridgeIUProfileUsedMATBasis (132): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlUsedMATBasis setBridgeIUProfileReplaceVlanTag (133): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlReplaceVlanTag setBridgeIUProfileDscpPriorityMapProfileIndex (134): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlDscpPriorityMapIndex" ::= { sheBridgeIUProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.2 sheBridgeIUProfileControlIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the IU to be configured." ::= { sheBridgeIUProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.3 sheBridgeIUProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgeIUProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.4 sheBridgeIUProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheBridgeIUProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.5 sheBridgeIUProfileControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgeIUProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.6 sheBridgeIUProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgeIUProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.7 sheBridgeIUProfileControlPPPoASrcMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheBridgeIUProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.8 sheBridgeIUProfileControlUsedMATBasis OBJECT-TYPE SYNTAX SheBridgeIUProfileUsedMATBasisType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8." ::= { sheBridgeIUProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.18 sheBridgeIUProfileControlReplaceVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "If configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport." ::= { sheBridgeIUProfileControl 9 } sheBridgeIUProfileControlDscpPriorityMapIndex OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheBridgeIUProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.10 sheBridgeIUNotifications OBJECT IDENTIFIER ::= { sheBridgeIUConfig 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 sheBridgeIUProfilePPPoASrcMacAddressModified NOTIFICATION-TYPE OBJECTS { sheBridgeIUProfileControlIndex, sheBridgeIUProfileControlTimeStamp, sheBridgeIUProfileControlPPPoASrcMacAddress } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgeIUNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 sheBridgeIUProfileUsedMATBasisModified NOTIFICATION-TYPE OBJECTS { sheBridgeIUProfileControlIndex, sheBridgeIUProfileControlTimeStamp, sheBridgeIUProfileControlUsedMATBasis } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgeIUNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 sheBridgeIUProfileReplaceVlanTagModified NOTIFICATION-TYPE OBJECTS { sheBridgeIUProfileControlIndex, sheBridgeIUProfileControlTimeStamp, sheBridgeIUProfileControlReplaceVlanTag } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgeIUNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 sheBridgeIUProfileDscpPriorityMapProfileIndexModified NOTIFICATION-TYPE OBJECTS { sheBridgeIUProfileControlIndex, sheBridgeIUProfileControlTimeStamp, sheBridgeIUProfileControlDscpPriorityMapIndex } STATUS current DESCRIPTION "Configuration notification." ::= { sheBridgeIUNotifications 4 } -- New with SHE R2.8. sheBridgePortPriorityMapConfig OBJECT IDENTIFIER ::= { sheBridge 9 } sheBridgePortPriorityMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgePortPriorityMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping profile DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the profile number. The second table index and the mapping key is the DSCP field. One default profile with index 1 always exist and can't be deleted but modified. " ::= { sheBridgePortPriorityMapConfig 1 } sheBridgePortPriorityMapEntry OBJECT-TYPE SYNTAX SheBridgePortPriorityMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping entry DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the entry index. The second table index and the mapping key is the DSCP field. One default mapping entry with index 1 always exist and can't be deleted but modified." INDEX { sheBridgePortPriorityMapEntryIndex, sheBridgePortPriorityMapDscp } ::= { sheBridgePortPriorityMapTable 1 } SheBridgePortPriorityMapEntry ::= SEQUENCE { sheBridgePortPriorityMapEntryIndex Unsigned32, sheBridgePortPriorityMapDscp Unsigned32, sheBridgePortPriorityMapPrio Unsigned32 } sheBridgePortPriorityMapEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the mapping profile is the first table index." ::= { sheBridgePortPriorityMapEntry 1 } sheBridgePortPriorityMapDscp OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64)." ::= { sheBridgePortPriorityMapEntry 2 } sheBridgePortPriorityMapPrio OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The .1p priority bits in the VLAN tag is the mapping value." ::= { sheBridgePortPriorityMapEntry 3 } sheBridgePortPriorityMapControl OBJECT IDENTIFIER ::= { sheBridgePortPriorityMapConfig 2 } sheBridgePortPrioMapControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "One default mapping entry with index 1 always exist and can't be deleted but modified. createBridgePortPrioMapEntry - a complete profile (64 entries) with a default mapping is created deleteBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex - a complete profile (64 entries) is deleted modifyBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex sheBridgePortPrioMapControlDscp sheBridgePortPrioMapControlPrio - a single entry of a profile is modified" ::= { sheBridgePortPriorityMapControl 1 } sheBridgePortPrioMapControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of the mapping entry is the first table index." ::= { sheBridgePortPriorityMapControl 2 } sheBridgePortPrioMapControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgePortPriorityMapControl 3 } sheBridgePortPrioMapControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheBridgePortPriorityMapControl 4 } sheBridgePortPrioMapControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgePortPriorityMapControl 5 } sheBridgePortPrioMapControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgePortPriorityMapControl 6 } sheBridgePortPrioMapControlDscp OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Bits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64)." ::= { sheBridgePortPriorityMapControl 7 } sheBridgePortPrioMapControlPrio OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The .1p priority bits in the VLAN tag is the mapping value." ::= { sheBridgePortPriorityMapControl 8 } sheBridgePortMCastConfig OBJECT IDENTIFIER ::= { sheBridge 10 } sheBridgePortMCastConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgePortMCastConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain all new defined bridgePort specific multicast configurations. New supported with SHE R2.8!" ::= { sheBridgePortMCastConfig 1 } sheBridgePortMCastConfigEntry OBJECT-TYPE SYNTAX SheBridgePortMCastConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MCast configuration settiongs per BridgePort." INDEX { sheBridgePortIndex } ::= { sheBridgePortMCastConfigTable 1 } SheBridgePortMCastConfigEntry ::= SEQUENCE { sheBridgePortMCastBandwithLimit Unsigned32, sheBridgePortMCastMinUCBandwithLimit Unsigned32, sheBridgePortMCastMaxJoinedNonPremiumGroup Unsigned32, sheBridgePortMCastRemainBandwith Unsigned32, sheBridgePortMCastACStatus SheBridgePortACStatus } sheBridgePortMCastBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..500 | 65535) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 65535 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control - default). New parameter with SHE R2.8." DEFVAL { 65535 } ::= { sheBridgePortMCastConfigEntry 1 } sheBridgePortMCastMinUCBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8." DEFVAL { 0 } ::= { sheBridgePortMCastConfigEntry 2 } sheBridgePortMCastMaxJoinedNonPremiumGroup OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..32 | 255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of non-premium multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8." DEFVAL { 10 } ::= { sheBridgePortMCastConfigEntry 3 } sheBridgePortMCastRemainBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "It is the remaining multicast bandwidth of a bridge port. New parameter with SHE R2.8." ::= { sheBridgePortMCastConfigEntry 4 } sheBridgePortMCastACStatus OBJECT-TYPE SYNTAX SheBridgePortACStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the AC (admission control) status of a bridgeport, It can be accept or deny. When it is accepted, it indicates the bridgeport still has enough bandwidth for multicast access. When it is denied, it indicates the bridgeport is short of bandwidth for multicast access. 1 means accept, 0 means deny. New parameter with SHE R2.8." ::= { sheBridgePortMCastConfigEntry 5 } sheBridgePortMCastControl OBJECT IDENTIFIER ::= { sheBridgePortMCastConfig 2 } sheBridgePortMCastControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setBridgePortExtMCastParameter(162): sheBridgePortMCastControlIndex sheBridgePortMCastControlBandwithLimit sheBridgePortMCastControlMinUCBandwithLimit sheBridgePortMCastControlMaxJoinedNonPremiumGroup " ::= { sheBridgePortMCastControl 1 } sheBridgePortMCastControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the bridgePort to be configured." ::= { sheBridgePortMCastControl 2 } sheBridgePortMCastControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgePortMCastControl 3 } sheBridgePortMCastControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheBridgePortMCastControl 4 } sheBridgePortMCastControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgePortMCastControl 5 } sheBridgePortMCastControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgePortMCastControl 6 } sheBridgePortMCastControlBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..500 | 65535) UNITS "100 kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 655353 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control). New parameter with SHE R2.8. " ::= { sheBridgePortMCastControl 11 } sheBridgePortMCastControlMinUCBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8. " ::= { sheBridgePortMCastControl 12 } sheBridgePortMCastControlMaxJoinedNonPremiumGroup OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..32 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of non-premium multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8." ::= { sheBridgePortMCastControl 13 } -- New with SHR R2.8. sheBridgePortEtherTypeConfig OBJECT IDENTIFIER ::= { sheBridge 11 } sheBridgePortEtypeVlanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgePortEtypeVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index." ::= { sheBridgePortEtherTypeConfig 1 } sheBridgePortEtypeVlanMapEntry OBJECT-TYPE SYNTAX SheBridgePortEtypeVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index." INDEX { sheBridgePortEtypeVlanMapProfIndex } ::= { sheBridgePortEtypeVlanMapTable 1 } SheBridgePortEtypeVlanMapEntry ::= SEQUENCE { sheBridgePortEtypeVlanMapProfIndex Unsigned32, sheBridgePortEtypeVlanMapEthertype OCTET STRING, sheBridgePortEtypeVlanMapVlanId Unsigned32, sheBridgePortEtypeVlanMapPriority Unsigned32 } sheBridgePortEtypeVlanMapProfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The Ethertype-VLAN mapping profile index." ::= { sheBridgePortEtypeVlanMapEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.2.4.1.20.1.2 sheBridgePortEtypeVlanMapEthertype OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged." ::= { sheBridgePortEtypeVlanMapEntry 2 } sheBridgePortEtypeVlanMapVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "A VLAN identifier mapped to the Ethertype's." ::= { sheBridgePortEtypeVlanMapEntry 3 } sheBridgePortEtypeVlanMapPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority part of the VLAN tag mapped to the Ethertype's." ::= { sheBridgePortEtypeVlanMapEntry 4 } -- New supported with SHE R2.8. sheBridgePortEtypeVlanMapControl OBJECT IDENTIFIER ::= { sheBridgePortEtherTypeConfig 2 } sheBridgePortEtypeVlanMapControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "the command to be executed createEtypeVlanMapProfEntry (171) sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryCreated modifyEtypeVlanMapProfEntry (172) sheBridgePortEtypeVlanMapCtrlProfIndex sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryModified deleteEtypeVlanMapProfEnty (173) sheBridgePortEtypeVlanMapCtrlProfIndex ->sheEtypeVlanMapProfEntryDeleted" ::= { sheBridgePortEtypeVlanMapControl 1 } sheBridgePortEtypeVlanMapControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheBridgePortEtypeVlanMapControl 2 } sheBridgePortEtypeVlanMapControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheBridgePortEtypeVlanMapControl 3 } sheBridgePortEtypeVlanMapControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgePortEtypeVlanMapControl 4 } sheBridgePortEtypeVlanMapControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command). " ::= { sheBridgePortEtypeVlanMapControl 5 } sheBridgePortEtypeVlanMapCtrlProfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The Ethertype-VLAN mapping profile index (first index)." ::= { sheBridgePortEtypeVlanMapControl 6 } sheBridgePortEtypeVlanMapCtrlEthertype OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "That is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value. The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged." ::= { sheBridgePortEtypeVlanMapControl 7 } sheBridgePortEtypeVlanMapCtrlVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "A VLAN identifier mapped to the Ethertype's." ::= { sheBridgePortEtypeVlanMapControl 8 } sheBridgePortEtypeVlanMapCtrlPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority part of the VLAN tag mapped to the Ethertype's." ::= { sheBridgePortEtypeVlanMapControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99 -- Only supported by SHE hiX5608 !! sheBridgeExtResidentialConfig OBJECT IDENTIFIER ::= { sheBridge 99 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1 sheBridgeExtResidentialTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBridgeExtResidentialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Only supported by SHE hiX5608 !! Table index is the ifIndex of uplink or trunk interfaces." ::= { sheBridgeExtResidentialConfig 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1 sheBridgeExtResidentialEntry OBJECT-TYPE SYNTAX SheBridgeExtResidentialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { ifIndex } ::= { sheBridgeExtResidentialTable 1 } SheBridgeExtResidentialEntry ::= SEQUENCE { sheBridgeExtResidentialMode SheEnableType, sheBridgeExtResidentialState SheBridgePortUsageType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.2 sheBridgeExtResidentialMode OBJECT-TYPE SYNTAX SheEnableType (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "A ext-residential mode: enable/disable" DEFVAL { disable } ::= { sheBridgeExtResidentialEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.3 sheBridgeExtResidentialState OBJECT-TYPE SYNTAX SheBridgePortUsageType MAX-ACCESS read-only STATUS current DESCRIPTION "Operative role of the port. (uplink,cascading,aggregated,notUsed, ...)" ::= { sheBridgeExtResidentialEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2 sheBridgeExtResidentialControl OBJECT IDENTIFIER ::= { sheBridgeExtResidentialConfig 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.1 sheBridgeExtResidentialControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "New with R2.8 - Only supported by SHE hiX5608 !!: setExtResidentialMode (990): sheBridgeExtResidentialControlPortIndex sheBridgeExtResidentialControlMode ->sheBridgeExtResidentialModeModified " ::= { sheBridgeExtResidentialControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.2 sheBridgeExtResidentialControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheBridgeExtResidentialControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.3 sheBridgeExtResidentialControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheBridgeExtResidentialControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.4 sheBridgeExtResidentialControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheBridgeExtResidentialControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.5 sheBridgeExtResidentialControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheBridgeExtResidentialControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.6 sheBridgeExtResidentialControlPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Set the port index." ::= { sheBridgeExtResidentialControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.7 sheBridgeExtResidentialControlMode OBJECT-TYPE SYNTAX SheEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "Set the ext-residential mode." ::= { sheBridgeExtResidentialControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100 sheBridgeConformance OBJECT IDENTIFIER ::= { sheBridge 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1 sheBridgeCompliances OBJECT IDENTIFIER ::= { sheBridgeConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1.1 -- this module -- this module sheBridgeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheBridgeBaseGroup, sheBridgeBaseControlGroup, sheBridgePortGroup, sheBridgePortControlGroup, sheBridgeNotificationsGroup, sheBridgeMacProfileGroup, sheBridgeIUProfileGroup, sheBridgeIUNotificationGroup, sheBridgePortPriorityMapGroup, sheBridgePortObsoleteGroup, sheBridgePortEtypeGroup } ::= { sheBridgeCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2 sheBridgeGroups OBJECT IDENTIFIER ::= { sheBridgeConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.1 sheBridgeBaseGroup OBJECT-GROUP OBJECTS { sheBridgeBaseMode, sheBridgeBaseOuterPVID, sheBridgeBaseSharedVlanLearning, sheBridgeBaseRemoteIdFormat, sheBridgeBaseStagTPID, sheBridgeBaseMacAntiSpoofing, sheBridgeBaseRoutingMode, sheBridgeBaseMaxHostName, sheBridgeBaseDlfFilter, sheBridgeBaseUnknownMuticastFilter, sheBridgeBaseIpoaArpReqInterval, sheBridgeBaseMaxIpUNI, sheBridgeBaseMirrorPort, sheBridgeBaseTaggingMode, sheBridgeBaseOuterPriority, sheBridgeBaseCircuitIdFormat } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.2 sheBridgeBaseControlGroup OBJECT-GROUP OBJECTS { sheBridgeBaseControlRequest, sheBridgeBaseControlStatus, sheBridgeBaseControlMode, sheBridgeBaseControlTaggingMode, sheBridgeBaseControlTimeStamp, sheBridgeBaseControlOuterPVID, sheBridgeBaseControlSharedVlanLearning, sheBridgeBaseControlStagTPID, sheBridgeBaseControlMacAntiSpoofing, sheBridgeBaseControlRoutingMode, sheBridgeBaseControlMaxHostName, sheBridgeBaseControlDlfFilter, sheBridgeBaseControlUnknownMulticastFilter, sheBridgeBaseControlIpoaArpReqInterval, sheBridgeBaseControlMirrorPort, sheBridgeBaseControlTimer, sheBridgeBaseControlReqResult, sheBridgeBaseControlOuterPriority, sheBridgeBaseControlCircuitIdFormat, sheBridgeBaseControlRemoteIdFormat, sheBridgeBaseControlMaxIpUNI } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.3 sheBridgePortGroup OBJECT-GROUP OBJECTS { sheSubLayerIndex, sheSubLayerCircuit, sheBridgePortPVID, sheBridgePortPriority, sheBridgePortUsage, sheBridgePortMaxLearnPermitCount, sheBridgePortIndex, sheBridgePortMode, sheBridgePortTaggingMode, sheBridgePortReplaceVlanTag, sheBridgePortRemoteId, sheBridgePortInnerPVID, sheBridgePortInnerPriority, sheBridgePortIpoaProviderRouterIpAddress, sheBridgePortPppoaSessionId, sheBridgePortMatEnabled, sheBridgePortHostConfigurationProtocol, sheBridgePortCircuitId, sheBridgePortIpAddressPermitCount, sheBridgePortPriorityMapIndex, sheBridgePortMcastGroupPackageList, sheBridgePortMcastMaxJoinedGroup, sheBridgePortMcastLeaveMode, sheBridgePortOuterPriorityOption, sheBridgePortInnerPriorityOption, sheBridgePortIpAsMode, sheBridgePortEtypeVlanMapProfilePtr } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.4 sheBridgePortControlGroup OBJECT-GROUP OBJECTS { sheBridgePortControlRequest, sheBridgePortControlIndex, sheBridgePortControlStatus, sheBridgePortControlPVID, sheBridgePortControlPriority, sheBridgePortControlUsage, sheBridgePortControlTimeStamp, sheBridgePortControlMaxLearnPermitCount, sheBridgePortControlTimer, sheBridgePortControlReqResult, sheBridgePortControlCircuitId, sheBridgePortControlMode, sheBridgePortControlTaggingMode, sheBridgePortControlReplaceVlanTag, sheBridgePortControlRemoteId, sheBridgePortControlInnerPVID, sheBridgePortControlInnerPriority, sheBridgePortControlIpoaProviderRouterIpAddress, sheBridgePortControlMatEnabled, sheBridgePortControlHostConfigurationProtocol, sheBridgePortControlIpAddressPermitCount, sheBridgePortControlPriorityMapIndex, sheBridgePortControlMcastGroupPackageList, sheBridgePortControlMcastMaxJoinedGroup, sheBridgePortControlMcastLeaveMode, sheBridgePortControlOuterPriorityOption, sheBridgePortControlInnerPriorityOption, sheBridgePortControlIpAsMode, sheBridgePortControlEtypeVlanMapProfilePtr } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.5 sheBridgeNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheBridgeBaseParamModified, sheBridgePortCreated, sheBridgePortDeleted, sheBridgePortVlanDefaultsModified, sheBridgePortUsageModified, sheBridgePortMaxLearnPermitCountModified, sheBridgePortFeatureModified, sheBridgeMacProfileSrcMacAddressModified, sheBridgePortCircuitIdModified, sheBridgePortRemoteIdModified, sheBridgePortCircuitIdCleared, sheBridgePortRemoteIdCleared, sheBridgePortInnerPVIDModified, sheBridgePortInnerPriorityModified, sheBridgePortIpoaProviderRouterIpAddressModified, sheBridgeIUProfilePPPoASrcMacAddressModified, setBridgePortPriorityOptionsModified, sheBridgePortMatEnabledModified, sheBridgePortPrioMapEntryModified, sheBridgePortMcastGroupPackageListModified, sheBridgePortMcastParameterModified, sheEtypeVlanMapProfEntryCreated, sheEtypeVlanMapProfEntryDeleted, sheBridgePortHostConfigurationProtocolModified, sheBridgePortIpAddressPermitCountModified, sheBridgePortPrioMapEntryCreated, sheEtypeVlanMapProfEntryModified, sheBridgePortPrioMapEntryDeleted, sheBridgePortIpAsModeModified, sheBridgeExtResidentialModeModified, sheBridgePortEtypeVlanMappingModified, sheBridgePortExtMCastParameterModified } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.6 sheBridgeMacProfileGroup OBJECT-GROUP OBJECTS { sheBridgeMacProfileSrcMacAddress, sheBridgeMacProfileControlRequest, sheBridgeMacProfileControlIndex, sheBridgeMacProfileControlStatus, sheBridgeMacProfileControlTimer, sheBridgeMacProfileControlReqResult, sheBridgeMacProfileControlTimeStamp, sheBridgeMacProfileControlSrcMacAddress } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.7 sheBridgeIUProfileGroup OBJECT-GROUP OBJECTS { sheBridgeIUPPPoASrcMacAddress, sheBridgeIUProfileControlRequest, sheBridgeIUProfileControlIndex, sheBridgeIUProfileControlStatus, sheBridgeIUProfileControlTimer, sheBridgeIUProfileControlReqResult, sheBridgeIUProfileControlTimeStamp, sheBridgeIUProfileControlPPPoASrcMacAddress, sheBridgeIUProfileUsedMATBasis, sheBridgeIUProfileControlUsedMATBasis, sheBridgeIUReplaceVlanTag, sheBridgeIUProfileControlReplaceVlanTag, sheBridgeIUDscpPriorityMapIndex, sheBridgeIUProfileControlDscpPriorityMapIndex } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.8 sheBridgeIUNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheBridgeIUProfilePPPoASrcMacAddressModified, sheBridgeIUProfileUsedMATBasisModified, sheBridgeIUProfileReplaceVlanTagModified, sheBridgeIUProfileDscpPriorityMapProfileIndexModified } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 8 } sheBridgePortPriorityMapGroup OBJECT-GROUP OBJECTS { sheBridgePortPriorityMapDscp, sheBridgePortPriorityMapPrio, sheBridgePortPrioMapControlRequest, sheBridgePortPrioMapControlIndex, sheBridgePortPrioMapControlStatus, sheBridgePortPrioMapControlTimer, sheBridgePortPrioMapControlReqResult, sheBridgePortPrioMapControlTimeStamp, sheBridgePortPrioMapControlDscp, sheBridgePortPrioMapControlPrio, sheBridgePortPriorityMapEntryIndex } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 9 } sheBridgePortMCastGroup OBJECT-GROUP OBJECTS { sheBridgePortMCastBandwithLimit, sheBridgePortMCastMaxJoinedNonPremiumGroup, sheBridgePortMCastRemainBandwith, sheBridgePortMCastMinUCBandwithLimit, sheBridgePortMCastACStatus, sheBridgePortMCastControlRequest, sheBridgePortMCastControlIndex, sheBridgePortMCastControlStatus, sheBridgePortMCastControlTimer, sheBridgePortMCastControlReqResult, sheBridgePortMCastControlTimeStamp, sheBridgePortMCastControlBandwithLimit, sheBridgePortMCastControlMaxJoinedNonPremiumGroup, sheBridgePortMCastControlMinUCBandwithLimit } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 10 } sheBridgePortMCastNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheBridgePortExtMCastParameterModified } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 11 } sheBridgePortObsoleteGroup OBJECT-GROUP OBJECTS { sheBridgePortMcastEHTMode, sheBridgePortControlMcastEHTMode, sheBridgePortIgmpSubscriberAccessMode, sheBridgePortControlIgmpSubscriberAccessMode } STATUS obsolete DESCRIPTION "Description." ::= { sheBridgeGroups 12 } sheBridgePortEtypeGroup OBJECT-GROUP OBJECTS { sheBridgePortEtypeVlanMapProfIndex, sheBridgePortEtypeVlanMapEthertype, sheBridgePortEtypeVlanMapVlanId, sheBridgePortEtypeVlanMapPriority, sheBridgePortEtypeVlanMapControlRequest, sheBridgePortEtypeVlanMapControlStatus, sheBridgePortEtypeVlanMapControlTimer, sheBridgePortEtypeVlanMapControlReqResult, sheBridgePortEtypeVlanMapControlTimeStamp, sheBridgePortEtypeVlanMapCtrlProfIndex, sheBridgePortEtypeVlanMapCtrlEthertype, sheBridgePortEtypeVlanMapCtrlVlanId, sheBridgePortEtypeVlanMapCtrlPriority } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 14 } sheBridgeObsoleteNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheBridgePortIgmpSubscriberAccessModeModified } STATUS obsolete DESCRIPTION "Description." ::= { sheBridgeGroups 15 } sheBridgeExtResidentialGroup OBJECT-GROUP OBJECTS { sheBridgeExtResidentialMode, sheBridgeExtResidentialState, sheBridgeExtResidentialControlRequest, sheBridgeExtResidentialControlStatus, sheBridgeExtResidentialControlTimer, sheBridgeExtResidentialControlReqResult, sheBridgeExtResidentialControlTimeStamp, sheBridgeExtResidentialControlPortIndex, sheBridgeExtResidentialControlMode } STATUS current DESCRIPTION "Description." ::= { sheBridgeGroups 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2 sheVlan OBJECT IDENTIFIER ::= { sheBridgeMib 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1 sheVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlanTable." ::= { sheVlan 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1 sheVlanEntry OBJECT-TYPE SYNTAX SheVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for every existing vlan in the system." INDEX { sheVlanIndex } ::= { sheVlanTable 1 } SheVlanEntry ::= SEQUENCE { sheVlanIndex Integer32, sheVlanName OCTET STRING, sheVlanStatus SheVlanStatusType, sheVlanEgressPorts OCTET STRING, sheVlanUnTaggedPorts OCTET STRING, sheVlanFdbId Unsigned32, sheVlanCreationTime TimeTicks, sheVlanMulticastPermission ShePermissionType, sheVlanDhcpProviderIndex Unsigned32, sheVlanDefaultGateway OCTET STRING, sheVlanPPPoEProviderIndex Unsigned32, sheVlanMgmtVlan INTEGER, sheVlanServiceTagOnly TruthValue, sheVlanAgeingTime Unsigned32, sheVlanRoutingMode SheBridgeRoutingModeType, sheVlanTunnelingL2Protocol TruthValue, sheVlanServiceType SheVlanServiceType, sheVlanDlfFlood TruthValue, sheVlanDlfFloodCard PhysicalIndex, sheVlanCCMode TruthValue, sheVlanRouted SheVlanRoutedType, sheVlanMcastFlood TruthValue, sheVlanMatEnable TruthValue, sheVlanSubportServiceName OCTET STRING, sheVlanUplinkTranslationVlan Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.1 sheVlanIndex OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "A vlan-identifier." ::= { sheVlanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.2 sheVlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name for that vlan. Spaces and other special characters (: ?) are not allowed!! " ::= { sheVlanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.3 sheVlanStatus OBJECT-TYPE SYNTAX SheVlanStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "static, in future gvrp values: static(1), dynamic(2) " ::= { sheVlanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.4 sheVlanEgressPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet." ::= { sheVlanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.5 sheVlanUnTaggedPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet." ::= { sheVlanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.6 sheVlanFdbId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "First index of the used Filtering Table. The value would be in current implementation identical to the VlanIndex." ::= { sheVlanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.7 sheVlanCreationTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Only useful in case of gvrp." ::= { sheVlanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.8 sheVlanMulticastPermission OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic. " DEFVAL { permit } ::= { sheVlanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.9 sheVlanDhcpProviderIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a DHCP or PPPoE provider vlan (sheDhcpVlanId)." DEFVAL { 0 } ::= { sheVlanEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.10 sheVlanDefaultGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Only needed if this VLAN is used as subscriber Vlan (PVID for a bridgeport) and the corresponding bridgeport use IpoA mode. Otherwise don't care. NOTE: Configuration not longer needed with R2.8. Funcionality replaced by bridgePort configuration of sheBridgePortIpoaProviderRouterIpAddress." ::= { sheVlanEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.11 sheVlanPPPoEProviderIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a PPPoE or DHCP provider vlan (sheDhcpVlanId)." DEFVAL { 0 } ::= { sheVlanEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.12 sheVlanMgmtVlan OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the VLAN that doesnt allows for subscriber ports to be joined." DEFVAL { 0 } ::= { sheVlanEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.13 sheVlanServiceTagOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6." ::= { sheVlanEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.14 sheVlanAgeingTime OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'." DEFVAL { 0 } ::= { sheVlanEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.15 sheVlanRoutingMode OBJECT-TYPE SYNTAX SheBridgeRoutingModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false)." ::= { sheVlanEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.16 sheVlanTunnelingL2Protocol OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If L2VPN is supported, all L2 protocol packets should be set as flood or drop. The value of this attribute is true, all L2 protocol packets is flooded to customers networks. (Default: false). Note: This configuration is not longer supported with SHE R2.8." ::= { sheVlanEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.17 sheVlanServiceType OBJECT-TYPE SYNTAX SheVlanServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "Define a tagging/stripping method in NE DT mode. 1 - It is a DoubleTagging mode for a VLAN. It strips both C-tag and S-tag in DSLAM. 2 - It is a VlanStacking mode for a VLAN. It strips an S-tag in DSLAM. " DEFVAL { 2 } ::= { sheVlanEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.18 sheVlanDlfFlood OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)" DEFVAL { false } ::= { sheVlanEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.19 sheVlanDlfFloodCard OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex of the line card where to flood DLF packets from uplink" ::= { sheVlanEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.21 sheVlanCCMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter describes the handling of broadcast (bc), unknown multicast (umc) and unknown unicast (uuc) traffic for this vlan. If cross connect mode is True all these packets are flooded in the VLAN otherwise they are droped. Supported by R2.5.1 and higher. " DEFVAL { false } ::= { sheVlanEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.22 sheVlanRouted OBJECT-TYPE SYNTAX SheVlanRoutedType MAX-ACCESS read-only STATUS current DESCRIPTION "Configure the handling of ARP request's in the NE for this vlan. Valid values: switching - A ARP request from Network side will be answered with CPE mac address. routing - A ARP request from Network side will be answered with DSLAM mac address. Supported by R2.5.1 and higher. " ::= { sheVlanEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.23 sheVlanMcastFlood OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If it is enabled, all mcast packets should be flooded in this vlan." DEFVAL { false } ::= { sheVlanEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.24 sheVlanMatEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan. " DEFVAL { false } ::= { sheVlanEntry 24 } sheVlanSubportServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID. New parameter with SHE R2.8." DEFVAL { "" } ::= { sheVlanEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.27 sheVlanUplinkTranslationVlan OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter enable a bidirectional vlanTranslation on Uplink side. The Vlan, identified by sheVlanIndex of this table-entry (subscriber side) will be translated to the vlan configured with this parameter. 0 - disabled -> is the default value and will disable the vlan translation. 65535 - usedAsTranslationVlan -> this vlan is already in use as an Translation-Vlan and could not be translated This configuration will only be valid for protocolframes, which are routed via hostprocessor. SharedVlanLearning has to be enabled (bridgeBase parameter)! For translation of usertraffic, additional rules has to be configured! " ::= { sheVlanEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2 sheVlanControl OBJECT IDENTIFIER ::= { sheVlan 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.1 sheVlanControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createVlan: sheVlanControlIndex sheVlanControlName sheVlanControlEgressPorts sheVlanControlUntaggedPorts sheVlanControlMulticastPermision (obsolete) sheVlanControlDhcpProviderIndex sheVlanControlPPPoEProviderIndex deleteVlan: sheVlanControlIndex setVlanName: sheVlanControlIndex sheVlanControlName setVlanPorts: - change complete Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts setVlanMulticastPermission (will not longer supported with R2.6) sheVlanControlIndex sheVlanControlMulticastPermission setVlanDhcpProviderIndex: sheVlanControlIndex sheVlanControlDhcpProviderIndex setVlanDefaultGateway: sheVlanControlIndex sheVlanControlDefaultGateway setVlanPppoeProviderIndex: sheVlanControlIndex sheVlanControlPPPoEProviderIndex setVlanMgmtVlan: sheVlanControlIndex sheVlanControlMgmtVlan setVlanServiceTagOnly:(not longer supported with R2.6) sheVlanControlIndex sheVlanControlServiceTagOnly setVlanAgeingTime: sheVlanControlIndex sheVlanControlAgeingTime setVlanRoutingMode: sheVlanControlIndex sheVlanControlRoutingMode setVlanTunnelingL2Protocol: sheVlanControlIndex sheVlanControlTunnelingL2Protocol setVlanServiceType: sheVlanControlIndex sheVlanControlServiceType addVlanPorts: - add Ports to Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts deleteVlanPorts: - delete Ports from Portlist sheVlanControlIndex sheVlanControlEgressPorts setVlanDlfFlood: sheVlanControlIndex sheVlanControlDlfFlood sheVlanControlDlfFloodCard setVlanCCMode(230), sheVlanControlIndex sheVlanControlCCMode setVlanRouted(231), sheVlanControlIndex sheVlanControlRouted setVlanMcastFlood(232), sheVlanControlIndex sheVlanControlMcastFlood setVlanMatEnable(233), sheVlanControlIndex sheVlanControlMatEnable setVlanTranslation(235) sheVlanControlIndex sheVlanControlUplinkTranslationVlan modifySubportServiceName (242) sheVlanControlIndex sheVlanControlSubportServiceName" ::= { sheVlanControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.2 sheVlanControlIndex OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the table entry to be configured." ::= { sheVlanControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.3 sheVlanControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheVlanControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.4 sheVlanControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheVlanControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.5 sheVlanControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheVlanControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.6 sheVlanControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheVlanControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.7 sheVlanControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptional name for that vlan. Spaces and other special characters (: ?) are not allowed!! " ::= { sheVlanControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.8 sheVlanControlEgressPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-write STATUS current DESCRIPTION "Portlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet." ::= { sheVlanControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.9 sheVlanControlUnTaggedPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-write STATUS current DESCRIPTION "Portlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet." ::= { sheVlanControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.10 sheVlanControlMulticastPermission OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Permission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic." ::= { sheVlanControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.11 sheVlanControlDhcpProviderIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Points to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated." ::= { sheVlanControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.12 sheVlanControlDefaultGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheVlanControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.13 sheVlanControlPPPoEProviderIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Points to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated." ::= { sheVlanControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.14 sheVlanControlMgmtVlan OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the VLAN that doesn't allow subscribers to join." ::= { sheVlanControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.15 sheVlanControlServiceTagOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6." ::= { sheVlanControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.16 sheVlanControlAgeingTime OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-write STATUS current DESCRIPTION "MAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'." ::= { sheVlanControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.17 sheVlanControlRoutingMode OBJECT-TYPE SYNTAX SheBridgeRoutingModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Generally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false)." ::= { sheVlanControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.18 sheVlanControlTunnelingL2Protocol OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheVlanControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.19 sheVlanControlServiceType OBJECT-TYPE SYNTAX SheVlanServiceType MAX-ACCESS read-write STATUS current DESCRIPTION "Set a tagging/stripping method in NE DT mode." ::= { sheVlanControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.20 sheVlanControlDlfFlood OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)" ::= { sheVlanControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.21 sheVlanControlDlfFloodCard OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The entPhysicalIndex of the line card where to flood DLF packets from uplink" ::= { sheVlanControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.22 sheVlanControlCCMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheVlanControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.23 sheVlanControlRouted OBJECT-TYPE SYNTAX SheVlanRoutedType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheVlanControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.24 sheVlanControlMcastFlood OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If it is enabled, all mcast packets should be flooded in this vlan." ::= { sheVlanControl 24 } sheVlanControlMatEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan." ::= { sheVlanControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.27 sheVlanControlSubportServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID." ::= { sheVlanControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.28 sheVlanControlUplinkTranslationVlan OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheVlanControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3 sheVlanNotifications OBJECT IDENTIFIER ::= { sheVlan 3 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.1 sheVlanCreated NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlName, sheVlanControlEgressPorts, sheVlanControlUnTaggedPorts, sheVlanControlMulticastPermission, sheVlanControlDhcpProviderIndex, sheVlanControlPPPoEProviderIndex } STATUS current DESCRIPTION "A new vlan was created." ::= { sheVlanNotifications 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.2 sheVlanModified NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanName, sheVlanEgressPorts, sheVlanUnTaggedPorts, sheVlanMulticastPermission, sheVlanDhcpProviderIndex, sheVlanDefaultGateway, sheVlanPPPoEProviderIndex } STATUS current DESCRIPTION "A vlan was modified." ::= { sheVlanNotifications 2 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.3 sheVlanDeleted NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp } STATUS current DESCRIPTION "A vlan was deleted." ::= { sheVlanNotifications 3 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.4 sheVlanPortsModified NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlEgressPorts, sheVlanControlUnTaggedPorts, sheVlanControlName } STATUS current DESCRIPTION "A vlan portlist was modified by command setVlanPorts." ::= { sheVlanNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.5 sheVlanMgmtVlanChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlName, sheVlanControlMgmtVlan } STATUS current DESCRIPTION "A vlan is assigned as Mgmt-Vlan." ::= { sheVlanNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.6 sheVlanServiceTagOnlyChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlServiceTagOnly } STATUS current DESCRIPTION "A customer tagging policy for a VLAN has been changed." ::= { sheVlanNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.7 sheVlanAgeingTimeChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlAgeingTime } STATUS current DESCRIPTION "MAC ageing time for a VLAN has been changed." ::= { sheVlanNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.8 sheVlanRoutingModeChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlRoutingMode } STATUS current DESCRIPTION "Local switching for a VLAN has been changed." ::= { sheVlanNotifications 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.9 sheVlanTunnelingL2ProtocolChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlTunnelingL2Protocol } STATUS current DESCRIPTION "L2 protocol for a VLAN has been changed." ::= { sheVlanNotifications 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.10 sheVlanServiceTypeChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlServiceType } STATUS current DESCRIPTION "Vlan service type for a VLAN has been changed." ::= { sheVlanNotifications 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.11 sheVlanDlfFloodChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlDlfFlood, sheVlanControlDlfFloodCard } STATUS current DESCRIPTION "A policy for handling Dlf packets has been changed." ::= { sheVlanNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.11 sheVlanPortslistModified NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlStatus, sheVlanControlReqResult, sheVlanControlTimeStamp, sheVlanEgressPorts, sheVlanUnTaggedPorts } STATUS current DESCRIPTION "Configuration trap after changing the current vlan portlist's by using the commands addVlanPorts or deleteVlanPorts. " ::= { sheVlanNotifications 12 } sheVlanCCModeChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlCCMode } STATUS current DESCRIPTION "configuration trap" ::= { sheVlanNotifications 13 } sheVlanRoutedChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlRouted } STATUS current DESCRIPTION "configuration trap" ::= { sheVlanNotifications 14 } sheVlanMcastFloodChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlMcastFlood } STATUS current DESCRIPTION "configuration trap" ::= { sheVlanNotifications 15 } sheVlanMatEnableChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlMatEnable } STATUS current DESCRIPTION "MAC address translation feature on Vlan base changed." ::= { sheVlanNotifications 16 } sheVlanSubportServiceNameModified NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlSubportServiceName } STATUS current DESCRIPTION "configuration trap" ::= { sheVlanNotifications 18 } sheVlanUplinkTranslationChanged NOTIFICATION-TYPE OBJECTS { sheVlanControlIndex, sheVlanControlTimeStamp, sheVlanControlUplinkTranslationVlan } STATUS current DESCRIPTION "Configuration modified." ::= { sheVlanNotifications 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4 sheVlanConformance OBJECT IDENTIFIER ::= { sheVlan 100 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.1 sheVlanCompliances OBJECT IDENTIFIER ::= { sheVlanConformance 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.1.1 -- this module -- this module sheVlanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheVlanGroup, sheVlanControlGroup, sheVlanNotificationGroup } ::= { sheVlanCompliances 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.2 sheVlanGroups OBJECT IDENTIFIER ::= { sheVlanConformance 2 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.2.1 sheVlanGroup OBJECT-GROUP OBJECTS { sheVlanName, sheVlanStatus, sheVlanEgressPorts, sheVlanUnTaggedPorts, sheVlanFdbId, sheVlanCreationTime, sheVlanDlfFlood, sheVlanDlfFloodCard, sheVlanCCMode, sheVlanRouted, sheVlanMatEnable, sheVlanMulticastPermission, sheVlanUplinkTranslationVlan, sheVlanMcastFlood, sheVlanIndex, sheVlanDhcpProviderIndex, sheVlanDefaultGateway, sheVlanPPPoEProviderIndex, sheVlanMgmtVlan, sheVlanServiceTagOnly, sheVlanAgeingTime, sheVlanRoutingMode, sheVlanTunnelingL2Protocol, sheVlanServiceType, sheVlanSubportServiceName } STATUS current DESCRIPTION "Description." ::= { sheVlanGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.2.2 sheVlanControlGroup OBJECT-GROUP OBJECTS { sheVlanControlRequest, sheVlanControlIndex, sheVlanControlStatus, sheVlanControlName, sheVlanControlEgressPorts, sheVlanControlUnTaggedPorts, sheVlanControlMulticastPermission, sheVlanControlDlfFlood, sheVlanControlDlfFloodCard, sheVlanControlCCMode, sheVlanControlRouted, sheVlanControlMcastFlood, sheVlanControlMatEnable, sheVlanControlUplinkTranslationVlan, sheVlanControlTimeStamp, sheVlanControlTimer, sheVlanControlReqResult, sheVlanControlDhcpProviderIndex, sheVlanControlDefaultGateway, sheVlanControlPPPoEProviderIndex, sheVlanControlMgmtVlan, sheVlanControlServiceTagOnly, sheVlanControlAgeingTime, sheVlanControlRoutingMode, sheVlanControlTunnelingL2Protocol, sheVlanControlServiceType, sheVlanControlSubportServiceName } STATUS current DESCRIPTION "Description." ::= { sheVlanGroups 2 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.4.2.3 sheVlanNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheVlanCreated, sheVlanModified, sheVlanDeleted, sheVlanPortsModified, sheVlanMgmtVlanChanged, sheVlanServiceTagOnlyChanged, sheVlanAgeingTimeChanged, sheVlanRoutingModeChanged, sheVlanTunnelingL2ProtocolChanged, sheVlanServiceTypeChanged, sheVlanCCModeChanged, sheVlanRoutedChanged, sheVlanMcastFloodChanged, sheVlanMatEnableChanged, sheVlanUplinkTranslationChanged, sheVlanPortslistModified, sheVlanDlfFloodChanged, sheVlanSubportServiceNameModified } STATUS current DESCRIPTION "Description." ::= { sheVlanGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3 sheRulesAndMetering OBJECT IDENTIFIER ::= { sheBridgeMib 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1 sheRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SheRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The she rule table." ::= { sheRulesAndMetering 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1 sheRuleEntry OBJECT-TYPE SYNTAX SheRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define pattern, matches and action's for Rule Controls." INDEX { sheRuleIndex } ::= { sheRuleTable 1 } SheRuleEntry ::= SEQUENCE { sheRuleIndex Unsigned32, sheRuleType SheRuleType, sheRuleName OCTET STRING, sheRulePriority Integer32, sheRuleBridgePortPattern Integer32, sheRuleBridgePortMatch SheRuleMatchType, sheRuleSourceMacPattern OCTET STRING, sheRuleSourceMacMatch SheRuleMatchType, sheRuleSourceMacStartPattern OCTET STRING, sheRuleSourceMacStopPattern OCTET STRING, sheRuleSourceMacRangeMatch SheRuleMatchType, sheRuleDestinationMacPattern OCTET STRING, sheRuleDestinationMacMatch SheRuleMatchType, sheRuleDestinationMacStartPattern OCTET STRING, sheRuleDestinationMacStopPattern OCTET STRING, sheRuleDestinationMacRangeMatch SheRuleMatchType, sheRuleVlanIdPattern Integer32, sheRuleVlanIdMatch SheRuleMatchType, sheRulePriorityPattern INTEGER, sheRulePriorityMatch SheRuleMatchType, sheRuleTosPattern INTEGER, sheRuleTosMatch SheRuleMatchType, sheRuleDscpPattern INTEGER, sheRuleDscpMatch SheRuleMatchType, sheRuleEtherTypePattern OCTET STRING, sheRuleEtherTypeMatch SheRuleMatchType, sheRuleSourceIpAddressPattern OCTET STRING, sheRuleSourceIpAddressMatch SheRuleMatchType, sheRuleSourceIpSubnetMaskPattern OCTET STRING, sheRuleSourceIpSubnetMaskMatch SheRuleMatchType, sheRuleDestinationIpAddressPattern OCTET STRING, sheRuleDestinationIpAddressMatch SheRuleMatchType, sheRuleDestinationIpSubnetMaskPattern OCTET STRING, sheRuleDestinationIpSubnetMaskMatch SheRuleMatchType, sheRuleSourcePortPattern Integer32, sheRuleSourcePortMatch SheRuleMatchType, sheRuleDestinationPortPattern Integer32, sheRuleDestinationPortMatch SheRuleMatchType, sheRuleAction SheRuleActionType, sheRuleActionParameter01 Integer32, sheRuleActionParameter02 Integer32, sheRuleFlowPattern SheRuleFlowType, sheRuleFlowMatch SheRuleMatchType, sheRuleIpProtocolPattern Unsigned32, sheRuleIpProtocolMatch SheRuleMatchType, sheRuleIpPrecedencePattern Unsigned32, sheRuleIpPrecedenceMatch SheRuleMatchType, sheRuleSourceMacMaskPattern OCTET STRING, sheRuleSourceMacMaskMatch SheRuleMatchType, sheRuleDestinationMacMaskPattern OCTET STRING, sheRuleDestinationMacMaskMatch SheRuleMatchType, sheRuleMessageTypePattern Integer32, sheRuleMessageTypeMatch SheRuleMatchType, sheRuleMessageCodePattern Integer32, sheRuleMessageCodeMatch SheRuleMatchType, sheRuleGenericMatchAction SheRuleGenericActionType, sheRuleGenericNoMatchAction SheRuleGenericActionType, sheRuleGenericMatchActionParameterMeterIndex Unsigned32, sheRuleGenericMatchActionParameterRedirPort Unsigned32, sheRuleGenericMatchActionParameterDscp Unsigned32, sheRuleGenericMatchActionParameterPriority Unsigned32, sheRuleGenericMatchActionParameterTagPriority Unsigned32, sheRuleGenericMatchActionParameterIpPrecedence Unsigned32, sheRuleGenericMatchActionParameterRate Unsigned32, sheRuleGenericMatchActionParameterVlanId Unsigned32, sheRuleGenericNoMatchActionParameterMeterIndex Unsigned32, sheRuleGenericNoMatchActionParameterRedirPort Unsigned32, sheRuleGenericNoMatchActionParameterDscp Unsigned32, sheRuleGenericNoMatchActionParameterPriority Unsigned32, sheRuleGenericNoMatchActionParameterTagPriority Unsigned32, sheRuleGenericNoMatchActionParameterIpPrecedence Unsigned32, sheRuleGenericNoMatchActionParameterRate Unsigned32, sheRuleGenericNoMatchActionParameterVlanId Unsigned32, sheRuleMatchCounter Integer32, sheRuleActivationState SheRuleActivationStateType, sheRuleInnerVlanIdPattern Integer32, sheRuleInnerVlanIdMatch SheRuleMatchType, sheRuleInnerPriorityPattern Integer32, sheRuleInnerPriorityMatch SheRuleMatchType, sheRuleIUPhysIndexPattern PhysicalIndex, sheRuleIUPhysIndexMatch SheRuleMatchType, sheRulePortIfIndexPattern InterfaceIndex, sheRulePortIfIndexMatch SheRuleMatchType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.1 sheRuleIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A userflow-identifier." ::= { sheRuleEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.2 sheRuleType OBJECT-TYPE SYNTAX SheRuleType MAX-ACCESS read-only STATUS current DESCRIPTION "This type defines the set of used pattern and actions for a rule of type. Inside one rule all used match-values have to be exact or exclude. Ignore is don't care. globalSrcMacDeny(1) Type = 1 Name = SourceMacPattern = SourceMacMatch = exact Action = Deny portFlowControl(2) Type = 2 Name = BridgePortPattern = BridgePortMatch = exact SourceMacPattern = SourceMacMatch = exact Action = Allow meteringBridgePort(3) Type = 3 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = Meter ActionParameter01 = Profile qosVlan(4) Type = 4 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosDscp(5) Type = 5 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosBridgePort(6) Type = 6 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority providerDoubleTagVlan01(7) Type = 7 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagPriority01(8) type = 8 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagDscp01(9) type = 9 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId providerDoubleTagVlan02(10) Type = 10 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagPriority02(11) type = 11 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagDscp(12) type = 12 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority mirrorBridgePort(13) Type = 13 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = mirror qosDscp02(14) type = 14 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority portFlowControl02(15) Type = 15 Name = Priority = DscpPattern = DscpMatch = exact BridgePortPattern = BridgePortMatch = exact Action = deny providerSingleTagVlan01(16) sheRuleControlType= 16 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new VlanId providerSingleTagVlan02(17) sheRuleControlType= 17 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlanTag sheRuleControlActionParameter01 = newVlanId sheRuleControlActionParameter02 = new Priority portFlowControl03(18) sheRuleControlType= 18 sheRuleControlName = portEtherTypVlan sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlBridgePortPattern = yy sheRuleControlBridgePortMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new PVID cosTranslation(19) sheRuleControlType= 19 sheRuleControlName = cosTranslation sheRuleControlPriority = sheRuleControlPriorityPattern = xx sheRuleControlPriorityMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty etherTypTranslation(20) sheRuleControlType= 20 sheRuleControlName = etherTypTranslation sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty vlanTranslation(21) sheRuleControlType= 21 sheRuleControlName = vlanTranslation sheRuleControlPriority = sheRuleControlVlanIdPattern = xx sheRuleControlVlanIdMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty dscpTranslation(22) sheRuleControlType= 22 sheRuleControlName = dscpTranslation sheRuleControlPriority = sheRuleControlDscpPattern = xx sheRuleControlDscpMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty New with SHE R2.7: meteringDot1P(25) Type = 25 Name = Priority = BridgePortPattern = BridgePortMatch = exact PriorityPattern = PriorityMatch = exact Action = Meter ActionParameter01 = MeterProfile New with SHE R2.8: meteringVlan(26) (currently support only by WIN/CNX IU) Type = 26 Name = Priority = VlanIdPattern = VlanIdMatch = exact IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnIU(27) (currently support only by WIN/CNX IU's) Type = 27 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnPort(28) (currently support only by CG IU's) Type = 28 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnIU(29) (currently support only by WIN/CNX IU's) Type = 29 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnPort(30) (currently support only by CG IU's) Type = 30 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnIU(31) (currently support only by WIN/CNX IU's) Type = 31 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnPort(32) (currently support only by CG IU's) Type = 32 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDslPort(33) (currently support only by CG IU's) Type = 33 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile ######## genericRule(50) sheRuleControlType= 50 In case of using the genericRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! genericAdminRule(51) sheRuleControlType= 51 In case of using the genericAdminRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! The only difference to rule-type 50, genericRule, is, that the AdminRule will complete handled by CXU-Software, without support of switching fabric!! " ::= { sheRuleEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.3 sheRuleName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional userflow-name. The name should be unique. Spaces and other special characters (: ?) are not allowed!! " ::= { sheRuleEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.4 sheRulePriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the rule. Usefull in case of multiple matches." ::= { sheRuleEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.5 sheRuleBridgePortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A sheBridgePortIndex." ::= { sheRuleEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.6 sheRuleBridgePortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.7 sheRuleSourceMacPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A single source mac-address." ::= { sheRuleEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.8 sheRuleSourceMacMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 8 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.9 sheRuleSourceMacStartPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A source mac-address to define the start point of a address range." ::= { sheRuleEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.10 sheRuleSourceMacStopPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A source mac-address to define the end point of a address range." ::= { sheRuleEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.11 sheRuleSourceMacRangeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 11 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.12 sheRuleDestinationMacPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A single destination mac-address." ::= { sheRuleEntry 12 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.13 sheRuleDestinationMacMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.14 sheRuleDestinationMacStartPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A destination mac-address to define the start point of a address range." ::= { sheRuleEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.15 sheRuleDestinationMacStopPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A destination mac-address to define the end point of a address range." ::= { sheRuleEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.16 sheRuleDestinationMacRangeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " ::= { sheRuleEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.17 sheRuleVlanIdPattern OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "A sheVlanIndex." ::= { sheRuleEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.18 sheRuleVlanIdMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.19 sheRulePriorityPattern OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "A .1p priority value. Range is 0-7." ::= { sheRuleEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.20 sheRulePriorityMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.21 sheRuleTosPattern OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A tos value. Range is 0..255. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence." ::= { sheRuleEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.22 sheRuleTosMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.23 sheRuleDscpPattern OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "A dscp value. Range is 0-63. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence." ::= { sheRuleEntry 23 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.24 sheRuleDscpMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.25 sheRuleEtherTypePattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "A ethertype pattern match." ::= { sheRuleEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.26 sheRuleEtherTypeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.27 sheRuleSourceIpAddressPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A single source ip-address." ::= { sheRuleEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.28 sheRuleSourceIpAddressMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.29 sheRuleSourceIpSubnetMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A source ip-address subnet mask." ::= { sheRuleEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.30 sheRuleSourceIpSubnetMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.31 sheRuleDestinationIpAddressPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A single destination ip-address." ::= { sheRuleEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.32 sheRuleDestinationIpAddressMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.33 sheRuleDestinationIpSubnetMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A destination ip-address subnet mask." ::= { sheRuleEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.34 sheRuleDestinationIpSubnetMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.35 sheRuleSourcePortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given." ::= { sheRuleEntry 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.36 sheRuleSourcePortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.37 sheRuleDestinationPortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given." ::= { sheRuleEntry 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.38 sheRuleDestinationPortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.39 sheRuleAction OBJECT-TYPE SYNTAX SheRuleActionType MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the action for the defined userflow. deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12) mirror(13)," DEFVAL { deny } ::= { sheRuleEntry 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.40 sheRuleActionParameter01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Define an additional parameter depence on the used action. deny,allow,mirror: not used changeTos: new Tos value changeDscp: new Dscp value changeInnerVlan: new Vlan Id changeOuterVlan: new Vlan Id meter: meterProfileIndex changeInnerPriority: new Priority (1p) changeOuterPriority: new Priority (1p) assignTC: Traffic class values 0-7 changeInnerVlanTag: new Vlan Id changeOuterVlanTag: new Vlan Id " ::= { sheRuleEntry 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.41 sheRuleActionParameter02 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Define an additional parameter depence on the used action. deny,allow,mirror,changeTos, changeDscp, changeInnerVlan, changeOuterVlan, meter, changeInnerPriority, changeOuterPriority, assignTC, mirror: not used changeInnerVlanTag: new Priority (1p) changeOuterVlanTag: new Priority (1p)" ::= { sheRuleEntry 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.42 sheRuleFlowPattern OBJECT-TYPE SYNTAX SheRuleFlowType MAX-ACCESS read-only STATUS current DESCRIPTION "The flow-direction for which this rule should work. 1 - upstream 2 - downstream 3 - bidirectional" ::= { sheRuleEntry 42 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.43 sheRuleFlowMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 43 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.44 sheRuleIpProtocolPattern OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Used L4-ProtocolType. Needed to evaluate the correct Ip-PortPattern (look at RFC791)." ::= { sheRuleEntry 44 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.45 sheRuleIpProtocolMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 45 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.46 sheRuleIpPrecedencePattern OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "A Ip precedence value 0-7. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence." ::= { sheRuleEntry 46 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.47 sheRuleIpPrecedenceMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 47 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.48 sheRuleSourceMacMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask for sheRuleSourceMacPattern. Will be evaluated by NE only if sheRuleSourceMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present. " ::= { sheRuleEntry 48 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.49 sheRuleSourceMacMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 49 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.50 sheRuleDestinationMacMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask for sheRuleDestinationMacPattern. Will be evaluated by NE only if sheRuleDestinationMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present. " ::= { sheRuleEntry 50 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.51 sheRuleDestinationMacMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 51 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.52 sheRuleMessageTypePattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Message Type. Currently used only if IP Protocol pattern is set to ICMP (RFC950). Otherwise ignored. " ::= { sheRuleEntry 52 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.53 sheRuleMessageTypeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 53 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.54 sheRuleMessageCodePattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "CodeType. Currently used only if IP Protocol pattern is set to ICMP and a MessageType Pattern is given (RFC950). Otherwise ignored. " ::= { sheRuleEntry 54 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.55 sheRuleMessageCodeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " DEFVAL { ignore } ::= { sheRuleEntry 55 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.56 sheRuleGenericMatchAction OBJECT-TYPE SYNTAX SheRuleGenericActionType MAX-ACCESS read-only STATUS current DESCRIPTION "Handle packet as follows if rule match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleGenericMatchActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame " ::= { sheRuleEntry 56 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57 sheRuleGenericNoMatchAction OBJECT-TYPE SYNTAX SheRuleGenericActionType MAX-ACCESS read-only STATUS current DESCRIPTION "Handle packet as follows if rule not match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericNoMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericNoMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericNoMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericNoMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericNoMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericNoMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleGenericNoMatchActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the frame " ::= { sheRuleEntry 57 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.58 sheRuleGenericMatchActionParameterMeterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Metering Profile Index used by genericrule action: meter(2)" ::= { sheRuleEntry 58 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.59 sheRuleGenericMatchActionParameterRedirPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "BridgePort Index used by rule action: redirect(3) " ::= { sheRuleEntry 59 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.60 sheRuleGenericMatchActionParameterDscp OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP value used by rule action: setDscp(5) " ::= { sheRuleEntry 60 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.61 sheRuleGenericMatchActionParameterPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority value used by rule action: setPriority(6) " ::= { sheRuleEntry 61 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.62 sheRuleGenericMatchActionParameterTagPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority value used by rule action: changeTagPriority(7) " ::= { sheRuleEntry 62 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.63 sheRuleGenericMatchActionParameterIpPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP Precedence value used by rule action: setIpPrecedence(9) " ::= { sheRuleEntry 63 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.64 sheRuleGenericMatchActionParameterRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "MBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate limit value (MBit per second) used by rule action: rateLimit(11) " ::= { sheRuleEntry 64 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.65 sheRuleGenericMatchActionParameterVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan ID used by rule action: changeVlanId(12) " ::= { sheRuleEntry 65 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.66 sheRuleGenericNoMatchActionParameterMeterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Metering Profile Index used by rule action: ---" ::= { sheRuleEntry 66 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.67 sheRuleGenericNoMatchActionParameterRedirPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "BridgePort Index used by rule action: redirect(3) " ::= { sheRuleEntry 67 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.68 sheRuleGenericNoMatchActionParameterDscp OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP value used by rule action: setDscp(5) " ::= { sheRuleEntry 68 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.69 sheRuleGenericNoMatchActionParameterPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority value used by rule action: setPriority(6) " ::= { sheRuleEntry 69 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.70 sheRuleGenericNoMatchActionParameterTagPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Priority value used by rule action: changeTagPriority(7) " ::= { sheRuleEntry 70 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.71 sheRuleGenericNoMatchActionParameterIpPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP Precedence value used by rule action: setIpPrecedence(9) " ::= { sheRuleEntry 71 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.72 sheRuleGenericNoMatchActionParameterRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "MBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Rate limit value (MBit per second) used by rule action: rateLimit(11) " ::= { sheRuleEntry 72 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.73 sheRuleGenericNoMatchActionParameterVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan ID used by rule action: changeVlanId(12) " ::= { sheRuleEntry 73 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.74 sheRuleMatchCounter OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of matches (how often the rule has been matched). Note: Not all rules types support counters. The NE responds the value -1 if there is no counter available. " DEFVAL { -1 } ::= { sheRuleEntry 74 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.75 sheRuleActivationState OBJECT-TYPE SYNTAX SheRuleActivationStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Show the activation state of a rule. A change of this value will not be notified by trap. " DEFVAL { 0 } ::= { sheRuleEntry 75 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.76 sheRuleInnerVlanIdPattern OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Match the inner vlanid under double-tag mode." ::= { sheRuleEntry 76 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.77 sheRuleInnerVlanIdMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " ::= { sheRuleEntry 77 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.78 sheRuleInnerPriorityPattern OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Match the inner .1p priority under double-tag mode." ::= { sheRuleEntry 78 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.79 sheRuleInnerPriorityMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " ::= { sheRuleEntry 79 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.82 sheRuleIUPhysIndexPattern OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Match the IU entPhysIndex from entPhysicalTable." ::= { sheRuleEntry 82 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.83 sheRuleIUPhysIndexMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " ::= { sheRuleEntry 83 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.84 sheRulePortIfIndexPattern OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Match the DSL port ifIndex from ifTable." ::= { sheRuleEntry 84 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.85 sheRulePortIfIndexMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3) " ::= { sheRuleEntry 85 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2 sheRuleControl OBJECT IDENTIFIER ::= { sheRulesAndMetering 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.1 sheRuleControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createRule: sheRuleControlName ... minimum of one pair of pattern-match-combination with a match-value unequal to ignore ... sheRuleControlAction sheRuleControlActionParameter01 ... deleteRule: sheRuleControlIndex clearRuleMatchCounter: sheRuleControlIndex " ::= { sheRuleControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.2 sheRuleControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the deleted rule." ::= { sheRuleControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.3 sheRuleControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheRuleControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.4 sheRuleControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheRuleControl 4 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.5 sheRuleControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheRuleControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.6 sheRuleControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheRuleControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.7 sheRuleControlType OBJECT-TYPE SYNTAX SheRuleType MAX-ACCESS read-write STATUS current DESCRIPTION "This type defines the set of used pattern and actions for this rule: look at rule-table." ::= { sheRuleControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.8 sheRuleControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptional userflow-name. The name should be unique, but there is a exception: In case of using a expand-Ruletype, the name of the expanding rule must be equal to the original rule, which should be expanded. Spaces and other special characters (: ?) are not allowed!! " ::= { sheRuleControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.9 sheRuleControlPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the rule. Usefull in case of multiple matches." ::= { sheRuleControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.10 sheRuleControlBridgePortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.11 sheRuleControlBridgePortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.12 sheRuleControlSourceMacPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.13 sheRuleControlSourceMacMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.14 sheRuleControlSourceMacStartPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.15 sheRuleControlSourceMacStopPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.16 sheRuleControlSourceMacRangeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 16 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.17 sheRuleControlDestinationMacPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.18 sheRuleControlDestinationMacMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.19 sheRuleControlDestinationMacStartPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.20 sheRuleControlDestinationMacStopPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.21 sheRuleControlDestinationMacRangeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.22 sheRuleControlVlanIdPattern OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.23 sheRuleControlVlanIdMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.24 sheRuleControlPriorityPattern OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.25 sheRuleControlPriorityMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.26 sheRuleControlTosPattern OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.27 sheRuleControlTosMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.28 sheRuleControlDscpPattern OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.29 sheRuleControlDscpMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.30 sheRuleControlEtherTypePattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.31 sheRuleControlEtherTypeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.32 sheRuleControlSourceIpAddressPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.33 sheRuleControlSourceIpAddressMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.34 sheRuleControlSourceIpSubnetMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.35 sheRuleControlSourceIpSubnetMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.36 sheRuleControlDestinationIpAddressPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.37 sheRuleControlDestinationIpAddressMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.38 sheRuleControlDestinationIpSubnetMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.39 sheRuleControlDestinationIpSubnetMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.40 sheRuleControlSourcePortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.41 sheRuleControlSourcePortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.42 sheRuleControlDestinationPortPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 42 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.43 sheRuleControlDestinationPortMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 43 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.44 sheRuleControlAction OBJECT-TYPE SYNTAX SheRuleActionType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 44 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.45 sheRuleControlActionParameter01 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 45 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.46 sheRuleControlActionParameter02 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 46 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.47 sheRuleControlFlowPattern OBJECT-TYPE SYNTAX SheRuleFlowType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 47 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.48 sheRuleControlFlowMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 48 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.49 sheRuleControlIpProtocolPattern OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 49 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.50 sheRuleControlIpProtocolMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 50 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.51 sheRuleControlIpPrecedencePattern OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 51 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.52 sheRuleControlIpPrecedenceMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 52 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.53 sheRuleControlSourceMacMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 53 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.54 sheRuleControlSourceMacMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 54 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.55 sheRuleControlDestinationMacMaskPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 55 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.56 sheRuleControlDestinationMacMaskMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 56 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.57 sheRuleControlMessageTypePattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 57 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.58 sheRuleControlMessageTypeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 58 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.59 sheRuleControlMessageCodePattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 59 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.60 sheRuleControlMessageCodeMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 60 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.61 sheRuleControlGenericMatchAction OBJECT-TYPE SYNTAX SheRuleGenericActionType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 61 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.62 sheRuleControlGenericNoMatchAction OBJECT-TYPE SYNTAX SheRuleGenericActionType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 62 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.63 sheRuleControlGenericMatchActionParameterMeterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 63 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.64 sheRuleControlGenericMatchActionParameterRedirPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 64 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.65 sheRuleControlGenericMatchActionParameterDscp OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 65 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.66 sheRuleControlGenericMatchActionParameterPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 66 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.67 sheRuleControlGenericMatchActionParameterTagPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 67 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.68 sheRuleControlGenericMatchActionParameterIpPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 68 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.69 sheRuleControlGenericMatchActionParameterRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "MBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 69 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.70 sheRuleControlGenericMatchActionParameterVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 70 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.71 sheRuleControlGenericNoMatchActionParameterMeterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 71 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.72 sheRuleControlGenericNoMatchActionParameterRedirPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 72 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.73 sheRuleControlGenericNoMatchActionParameterDscp OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 73 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.74 sheRuleControlGenericNoMatchActionParameterPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 74 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.75 sheRuleControlGenericNoMatchActionParameterTagPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 75 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.76 sheRuleControlGenericNoMatchActionParameterIpPrecedence OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 76 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.77 sheRuleControlGenericNoMatchActionParameterRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "MBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 77 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.78 sheRuleControlGenericNoMatchActionParameterVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 78 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.79 sheRuleControlInnerVlanIdPattern OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Match the inner vlanid under double-tag mode." ::= { sheRuleControl 79 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.80 sheRuleControlInnerVlanIdMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 80 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.81 sheRuleControlInnerPriorityPattern OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 81 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.82 sheRuleControlInnerPriorityMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheRuleControl 82 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.85 sheRuleControlIUPhysIndexPattern OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 85 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.86 sheRuleControlIUPhysIndexMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 86 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.87 sheRuleControlPortIfIndexPattern OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 87 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.88 sheRuleControlPortIfIndexMatch OBJECT-TYPE SYNTAX SheRuleMatchType MAX-ACCESS read-write STATUS current DESCRIPTION "look at rule table..." ::= { sheRuleControl 88 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3 sheRuleNotifications OBJECT IDENTIFIER ::= { sheRulesAndMetering 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.1 sheRuleCreated NOTIFICATION-TYPE OBJECTS { sheRuleControlIndex, sheRuleControlTimeStamp, sheRuleControlName, sheRuleControlType } STATUS current DESCRIPTION "Configuration notification." ::= { sheRuleNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.2 sheRuleDeleted NOTIFICATION-TYPE OBJECTS { sheRuleControlIndex, sheRuleControlTimeStamp, sheRuleControlName } STATUS current DESCRIPTION "Configuration notification." ::= { sheRuleNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.3 sheRuleModified NOTIFICATION-TYPE OBJECTS { sheRuleControlIndex, sheRuleControlTimeStamp, sheRuleControlType, sheRuleControlName } STATUS current DESCRIPTION "Configuration notification." ::= { sheRuleNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4 sheMeterProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMeterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The meter profile table." ::= { sheRulesAndMetering 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1 sheMeterProfileEntry OBJECT-TYPE SYNTAX SheMeterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each metering profile. Selection of the used profile will be done via rule-configuration. Note: DS policing will currently not supported by the NE (information stand R2.8)!" INDEX { sheMeterProfileIndex } ::= { sheMeterProfileTable 1 } SheMeterProfileEntry ::= SEQUENCE { sheMeterProfileIndex Unsigned32, sheMeterProfileName OCTET STRING, sheMeterProfileCir Integer32, sheMeterProfileCbs Integer32, sheMeterProfilePir Integer32, sheMeterProfilePbs Integer32, sheMeterProfileDsCir Integer32, sheMeterProfileDsCbs Integer32, sheMeterProfileDsPir Integer32, sheMeterProfileDsPbs Integer32, sheMeterProfileUseParameters SheMeterProfileUseParametersType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.1 sheMeterProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A profile-table index." ::= { sheMeterProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.2 sheMeterProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name for this metering profile. Spaces and other special characters (: ?) are not allowed!! " ::= { sheMeterProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.3 sheMeterProfileCir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Information Rate for upstream policing. ATTENTION: CIR smaller or equal PIR" ::= { sheMeterProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.4 sheMeterProfileCbs OBJECT-TYPE SYNTAX Integer32 (96..10000) UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Burst Size for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)" ::= { sheMeterProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.5 sheMeterProfilePir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The peak information rate for upstream policing. ATTENTION: CIR smaller or equal PIR" ::= { sheMeterProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.6 sheMeterProfilePbs OBJECT-TYPE SYNTAX Integer32 (96..15000) UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The peak burst size (or maximum burst size MBS) for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)" ::= { sheMeterProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.7 sheMeterProfileDsCir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Information Rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR" ::= { sheMeterProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.8 sheMeterProfileDsCbs OBJECT-TYPE SYNTAX Integer32 (96..10000) UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Burst Size for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)" ::= { sheMeterProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.9 sheMeterProfileDsPir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The peak information rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIR" ::= { sheMeterProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.10 sheMeterProfileDsPbs OBJECT-TYPE SYNTAX Integer32 (96..15000) UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The peak burst size (or maximum burst size MBS) for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)" ::= { sheMeterProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.13 sheMeterProfileUseParameters OBJECT-TYPE SYNTAX SheMeterProfileUseParametersType MAX-ACCESS read-only STATUS current DESCRIPTION "This defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used. - policingUS(0) - policingDS(1) Note: DS policing will currently not supported by the NE (information stand R2.8)!" ::= { sheMeterProfileEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5 sheMeterControl OBJECT IDENTIFIER ::= { sheRulesAndMetering 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.1 sheMeterControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createMeterProfile: sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters deleteMeterProfile: sheMeterControlIndex modifyMeterProfile: sheMeterControlIndex sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters " ::= { sheMeterControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.2 sheMeterControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the configured table entry. Needed for modify or delete." ::= { sheMeterControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.3 sheMeterControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheMeterControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.4 sheMeterControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheMeterControl 4 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.5 sheMeterControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheMeterControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.6 sheMeterControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheMeterControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.7 sheMeterControlProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable... Spaces and other special characters (: ?) are not allowed!! " ::= { sheMeterControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.8 sheMeterControlProfileCir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.9 sheMeterControlProfileCbs OBJECT-TYPE SYNTAX Integer32 (96..10000) UNITS "Bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.10 sheMeterControlProfilePir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.11 sheMeterControlProfilePbs OBJECT-TYPE SYNTAX Integer32 (96..15000) UNITS "Bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.12 sheMeterControlProfileDsCir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.13 sheMeterControlProfileDsCbs OBJECT-TYPE SYNTAX Integer32 (96..10000) UNITS "Bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.14 sheMeterControlProfileDsPir OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.15 sheMeterControlProfileDsPbs OBJECT-TYPE SYNTAX Integer32 (96..15000) UNITS "Bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "look at meterProfileTable..." ::= { sheMeterControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.18 sheMeterControlProfileUseParameters OBJECT-TYPE SYNTAX SheMeterProfileUseParametersType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheMeterControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6 sheMeteringNotifications OBJECT IDENTIFIER ::= { sheRulesAndMetering 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.1 sheMeteringProfileCreated NOTIFICATION-TYPE OBJECTS { sheMeterControlIndex, sheMeterControlTimeStamp, sheMeterControlProfileName, sheMeterControlProfileCir, sheMeterControlProfileCbs, sheMeterControlProfilePir, sheMeterControlProfilePbs, sheMeterControlProfileDsCir, sheMeterControlProfileDsCbs, sheMeterControlProfileDsPir, sheMeterControlProfileDsPbs, sheMeterControlProfileUseParameters } STATUS current DESCRIPTION "Configuration notification." ::= { sheMeteringNotifications 1 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.2 sheMeteringProfileModified NOTIFICATION-TYPE OBJECTS { sheMeterControlIndex, sheMeterControlTimeStamp, sheMeterControlProfileName, sheMeterControlProfileCir, sheMeterControlProfileCbs, sheMeterControlProfilePir, sheMeterControlProfilePbs, sheMeterControlProfileDsCir, sheMeterControlProfileDsCbs, sheMeterControlProfileDsPir, sheMeterControlProfileDsPbs, sheMeterControlProfileUseParameters } STATUS current DESCRIPTION "Configuration notification." ::= { sheMeteringNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.3 sheMeteringProfileDeleted NOTIFICATION-TYPE OBJECTS { sheMeterControlIndex, sheMeterControlTimeStamp, sheMeterControlProfileName } STATUS current DESCRIPTION "Configuration notification." ::= { sheMeteringNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7 sheRuleAndMeteringConformance OBJECT IDENTIFIER ::= { sheRulesAndMetering 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.1 sheUserFlowAndMeteringCompliances OBJECT IDENTIFIER ::= { sheRuleAndMeteringConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.1.1 -- this module -- this module sheUserFlowAndMeteringCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheRuleGroup, sheMeteringGroup, sheRuleControlGroup, sheMeteringControlGroup, sheRuleAndMeteringNotificationGroup } ::= { sheUserFlowAndMeteringCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2 sheUserFlowAndMeteringGroups OBJECT IDENTIFIER ::= { sheRuleAndMeteringConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2.1 sheRuleGroup OBJECT-GROUP OBJECTS { sheRuleIndex, sheRuleName, sheRulePriority, sheRuleBridgePortPattern, sheRuleBridgePortMatch, sheRuleSourceMacPattern, sheRuleSourceMacMatch, sheRuleSourceMacStartPattern, sheRuleSourceMacStopPattern, sheRuleSourceMacRangeMatch, sheRuleDestinationMacPattern, sheRuleDestinationMacMatch, sheRuleDestinationMacStartPattern, sheRuleDestinationMacStopPattern, sheRuleDestinationMacRangeMatch, sheRuleVlanIdPattern, sheRuleVlanIdMatch, sheRulePriorityPattern, sheRulePriorityMatch, sheRuleTosPattern, sheRuleTosMatch, sheRuleDscpPattern, sheRuleDscpMatch, sheRuleEtherTypePattern, sheRuleEtherTypeMatch, sheRuleSourceIpAddressPattern, sheRuleSourceIpAddressMatch, sheRuleSourceIpSubnetMaskPattern, sheRuleSourceIpSubnetMaskMatch, sheRuleDestinationIpAddressPattern, sheRuleDestinationIpAddressMatch, sheRuleDestinationIpSubnetMaskPattern, sheRuleDestinationIpSubnetMaskMatch, sheRuleSourcePortPattern, sheRuleSourcePortMatch, sheRuleDestinationPortPattern, sheRuleDestinationPortMatch, sheRuleFlowPattern, sheRuleFlowMatch, sheRuleIpProtocolPattern, sheRuleIpPrecedencePattern, sheRuleIpPrecedenceMatch, sheRuleActivationState, sheRuleSourceMacMaskPattern, sheRuleSourceMacMaskMatch, sheRuleDestinationMacMaskPattern, sheRuleDestinationMacMaskMatch, sheRuleMessageTypePattern, sheRuleMessageTypeMatch, sheRuleMessageCodePattern, sheRuleMessageCodeMatch, sheRuleGenericMatchAction, sheRuleGenericNoMatchAction, sheRuleGenericMatchActionParameterMeterIndex, sheRuleGenericMatchActionParameterRedirPort, sheRuleGenericMatchActionParameterDscp, sheRuleGenericMatchActionParameterPriority, sheRuleGenericMatchActionParameterTagPriority, sheRuleGenericMatchActionParameterIpPrecedence, sheRuleGenericMatchActionParameterRate, sheRuleGenericMatchActionParameterVlanId, sheRuleGenericNoMatchActionParameterMeterIndex, sheRuleGenericNoMatchActionParameterRedirPort, sheRuleGenericNoMatchActionParameterDscp, sheRuleGenericNoMatchActionParameterPriority, sheRuleGenericNoMatchActionParameterTagPriority, sheRuleGenericNoMatchActionParameterIpPrecedence, sheRuleGenericNoMatchActionParameterRate, sheRuleGenericNoMatchActionParameterVlanId, sheRuleMatchCounter, sheRuleIUPhysIndexPattern, sheRuleIUPhysIndexMatch, sheRulePortIfIndexPattern, sheRulePortIfIndexMatch, sheRuleAction, sheRuleType, sheRuleActionParameter01, sheRuleActionParameter02, sheRuleIpProtocolMatch, sheRuleInnerVlanIdPattern, sheRuleInnerVlanIdMatch, sheRuleInnerPriorityPattern, sheRuleInnerPriorityMatch } STATUS current DESCRIPTION "Description." ::= { sheUserFlowAndMeteringGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2.2 sheMeteringGroup OBJECT-GROUP OBJECTS { sheMeterProfileCir, sheMeterProfileCbs, sheMeterProfilePir, sheMeterProfileDsCir, sheMeterProfileDsCbs, sheMeterProfileDsPir, sheMeterProfileDsPbs, sheMeterProfileUseParameters, sheMeterProfileName, sheMeterProfileIndex, sheMeterProfilePbs } STATUS current DESCRIPTION "Description." ::= { sheUserFlowAndMeteringGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2.3 sheRuleControlGroup OBJECT-GROUP OBJECTS { sheRuleControlRequest, sheRuleControlIndex, sheRuleControlStatus, sheRuleControlTimer, sheRuleControlReqResult, sheRuleControlTimeStamp, sheRuleControlName, sheRuleControlBridgePortPattern, sheRuleControlBridgePortMatch, sheRuleControlSourceMacPattern, sheRuleControlSourceMacMatch, sheRuleControlSourceMacStartPattern, sheRuleControlSourceMacStopPattern, sheRuleControlSourceMacRangeMatch, sheRuleControlDestinationMacPattern, sheRuleControlDestinationMacMatch, sheRuleControlDestinationMacStartPattern, sheRuleControlDestinationMacStopPattern, sheRuleControlDestinationMacRangeMatch, sheRuleControlVlanIdPattern, sheRuleControlVlanIdMatch, sheRuleControlPriorityPattern, sheRuleControlPriorityMatch, sheRuleControlTosPattern, sheRuleControlTosMatch, sheRuleControlDscpPattern, sheRuleControlDscpMatch, sheRuleControlEtherTypePattern, sheRuleControlEtherTypeMatch, sheRuleControlSourceIpAddressPattern, sheRuleControlSourceIpAddressMatch, sheRuleControlSourceIpSubnetMaskPattern, sheRuleControlSourceIpSubnetMaskMatch, sheRuleControlDestinationIpAddressPattern, sheRuleControlDestinationIpAddressMatch, sheRuleControlDestinationIpSubnetMaskPattern, sheRuleControlDestinationIpSubnetMaskMatch, sheRuleControlSourcePortPattern, sheRuleControlSourcePortMatch, sheRuleControlDestinationPortPattern, sheRuleControlDestinationPortMatch, sheRuleControlFlowPattern, sheRuleControlFlowMatch, sheRuleControlIpProtocolPattern, sheRuleControlIpProtocolMatch, sheRuleControlIpPrecedencePattern, sheRuleControlIpPrecedenceMatch, sheRuleControlSourceMacMaskPattern, sheRuleControlSourceMacMaskMatch, sheRuleControlDestinationMacMaskPattern, sheRuleControlDestinationMacMaskMatch, sheRuleControlMessageTypePattern, sheRuleControlMessageTypeMatch, sheRuleControlMessageCodePattern, sheRuleControlMessageCodeMatch, sheRuleControlGenericMatchAction, sheRuleControlGenericNoMatchAction, sheRuleControlGenericMatchActionParameterMeterIndex, sheRuleControlGenericMatchActionParameterRedirPort, sheRuleControlGenericMatchActionParameterDscp, sheRuleControlGenericMatchActionParameterPriority, sheRuleControlGenericMatchActionParameterTagPriority, sheRuleControlGenericMatchActionParameterIpPrecedence, sheRuleControlGenericMatchActionParameterRate, sheRuleControlGenericMatchActionParameterVlanId, sheRuleControlGenericNoMatchActionParameterMeterIndex, sheRuleControlGenericNoMatchActionParameterRedirPort, sheRuleControlGenericNoMatchActionParameterDscp, sheRuleControlGenericNoMatchActionParameterPriority, sheRuleControlGenericNoMatchActionParameterTagPriority, sheRuleControlGenericNoMatchActionParameterIpPrecedence, sheRuleControlGenericNoMatchActionParameterRate, sheRuleControlGenericNoMatchActionParameterVlanId, sheRuleControlIUPhysIndexPattern, sheRuleControlIUPhysIndexMatch, sheRuleControlPortIfIndexPattern, sheRuleControlPortIfIndexMatch, sheRuleControlAction, sheRuleControlType, sheRuleControlPriority, sheRuleControlActionParameter01, sheRuleControlActionParameter02, sheRuleControlInnerVlanIdPattern, sheRuleControlInnerVlanIdMatch, sheRuleControlInnerPriorityPattern, sheRuleControlInnerPriorityMatch } STATUS current DESCRIPTION "Description." ::= { sheUserFlowAndMeteringGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2.4 sheMeteringControlGroup OBJECT-GROUP OBJECTS { sheMeterControlRequest, sheMeterControlIndex, sheMeterControlStatus, sheMeterControlTimer, sheMeterControlReqResult, sheMeterControlTimeStamp, sheMeterControlProfileName, sheMeterControlProfileCir, sheMeterControlProfileCbs, sheMeterControlProfilePir, sheMeterControlProfilePbs, sheMeterControlProfileDsCir, sheMeterControlProfileDsCbs, sheMeterControlProfileDsPir, sheMeterControlProfileDsPbs, sheMeterControlProfileUseParameters } STATUS current DESCRIPTION "Description." ::= { sheUserFlowAndMeteringGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.3.7.2.5 sheRuleAndMeteringNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMeteringProfileCreated, sheMeteringProfileDeleted, sheRuleModified, sheMeteringProfileModified, sheRuleCreated, sheRuleDeleted } STATUS current DESCRIPTION "Description." ::= { sheUserFlowAndMeteringGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4 sheFdb OBJECT IDENTIFIER ::= { sheBridgeMib 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1 sheFdbBase OBJECT IDENTIFIER ::= { sheFdb 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.1 sheFdbBaseAgeingTime OBJECT-TYPE SYNTAX Unsigned32 (1..100000) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The general ageing time for learned Mac-addresses." ::= { sheFdbBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.2 sheFdbBaseLearningUplink OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The global value that indicates whether to use a mac learning function for uplink." ::= { sheFdbBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2 sheFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF SheFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The forwarding data base table. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the vlanIndex, which is the first table index here. If a valid vlanIndex value was used, only the tableEntries with this vlanIndex as first key will be refreshed. If the vlanIndex is 0 or unknown the full table will be refreshed." ::= { sheFdb 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1 sheFdbEntry OBJECT-TYPE SYNTAX SheFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry per learned mac-address per vlan. First key is the VlanIndex." INDEX { sheVlanFdbId, sheFdbIndex } ::= { sheFdbTable 1 } SheFdbEntry ::= SEQUENCE { sheFdbIndex Unsigned32, sheFdbMacAddress OCTET STRING, sheFdbPort INTEGER, sheFdbAge Unsigned32, sheFdbStatus SheFdbStatusType, sheFdbCpuPermit ShePermissionType, sheFdbPortPermit ShePermissionType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.1 sheFdbIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Second key for fdb-table. Number of valid entrys is equal to number of current learned Mac-Addresses for vlan indeced by key 1." ::= { sheFdbEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.2 sheFdbMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The learned mac-address." ::= { sheFdbEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.3 sheFdbPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "That is the sheBridgePortIndex of the destination port." ::= { sheFdbEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.4 sheFdbAge OBJECT-TYPE SYNTAX Unsigned32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Time this mac-address was learned." ::= { sheFdbEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.5 sheFdbStatus OBJECT-TYPE SYNTAX SheFdbStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry. The meanings of the values are: other(1) : none of the following. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value was learned, and is being used. self(4) : the value of the corresponding instance of FdbAclAddress represents one of the bridge's addresses. mgmt(5) : static(6) : the value was not learned but fixed configured by operator " ::= { sheFdbEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.6 sheFdbCpuPermit OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Frames have the permission to be send to control plane." ::= { sheFdbEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.7 sheFdbPortPermit OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Frames have the permission to be send to data plane." ::= { sheFdbEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3 sheFdbControl OBJECT IDENTIFIER ::= { sheFdb 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.1 sheFdbControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setFdbBaseAgeingTime (401): sheFdbControlBaseAgeingTime setFdbBaseLearningUplink (402): sheFdbControlBaseLearningUplink New with R2.8 maintenance: refreshFdbTable (403): sheFdbControlIndex -> define the vlan for which the Fdb should be updated, Only supported by hiX5608 R1.3!! createFdbStaticEntry(404): sheFdbControlIndex -> define the vlan for which the FdbEntry should be created sheFdbControlPort -> define the bridgePort-Index for which the FdbEntry should be created sheFdbControlMacAddress -> define the used MacAddress " ::= { sheFdbControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.2 sheFdbControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Value depends on the used ControlRequest. " ::= { sheFdbControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.3 sheFdbControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. ." ::= { sheFdbControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.4 sheFdbControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheFdbControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.5 sheFdbControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheFdbControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.6 sheFdbControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheFdbControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.7 sheFdbControlBaseAgeingTime OBJECT-TYPE SYNTAX Unsigned32 (1..100000) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The values to be configured." ::= { sheFdbControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.8 sheFdbControlBaseLearningUplink OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The values to be configured. True : enable mac learning for uplink False : disable mac learning for uplink " ::= { sheFdbControl 8 } sheFdbControlPort OBJECT-TYPE SYNTAX Integer32 (0 | 1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Define the bridgePort-Index for which the FdbEntry should be created/deleted. Value depends on the used ControlRequest. 0 used as wildcard for 'ALL' NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!" ::= { sheFdbControl 9 } sheFdbControlMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Define the MacAddress for configuration or delete. Value depends on the used ControlRequest. NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!" ::= { sheFdbControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4 sheFdbNotifications OBJECT IDENTIFIER ::= { sheFdb 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.1 sheFdbBaseAgeingTimeChanged NOTIFICATION-TYPE OBJECTS { sheFdbControlTimeStamp, sheFdbControlBaseAgeingTime } STATUS current DESCRIPTION "Configuration Notification" ::= { sheFdbNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.2 sheFdbBaseLearningUplinkChanged NOTIFICATION-TYPE OBJECTS { sheFdbControlTimeStamp, sheFdbControlBaseLearningUplink } STATUS current DESCRIPTION "Configuration Notification" ::= { sheFdbNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.3 sheFdbTableUpdated NOTIFICATION-TYPE OBJECTS { sheFdbControlTimeStamp, sheFdbControlIndex, sheFdbControlReqResult } STATUS current DESCRIPTION "FDB table update finished." ::= { sheFdbNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.4 sheFdbStaticMacCreated NOTIFICATION-TYPE OBJECTS { sheFdbControlTimeStamp, sheFdbControlIndex, sheFdbControlPort, sheFdbControlMacAddress } STATUS current DESCRIPTION "static FDB table entry created" ::= { sheFdbNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5 sheFdbConformance OBJECT IDENTIFIER ::= { sheFdb 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.1 sheFdbCompliances OBJECT IDENTIFIER ::= { sheFdbConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.1.1 -- this module -- this module sheFdbCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheFdbBaseGroup, sheFdbGroup, sheFdbControlGroup, sheFdbNotificationGroup } ::= { sheFdbCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.2 sheFdbGroups OBJECT IDENTIFIER ::= { sheFdbConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.2.1 sheFdbBaseGroup OBJECT-GROUP OBJECTS { sheFdbBaseAgeingTime, sheFdbBaseLearningUplink } STATUS current DESCRIPTION "Description." ::= { sheFdbGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.2.2 sheFdbGroup OBJECT-GROUP OBJECTS { sheFdbIndex, sheFdbMacAddress, sheFdbPort, sheFdbAge, sheFdbStatus, sheFdbCpuPermit, sheFdbPortPermit } STATUS current DESCRIPTION "Description." ::= { sheFdbGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.2.3 sheFdbControlGroup OBJECT-GROUP OBJECTS { sheFdbControlRequest, sheFdbControlIndex, sheFdbControlStatus, sheFdbControlBaseAgeingTime, sheFdbControlBaseLearningUplink, sheFdbControlPort, sheFdbControlMacAddress, sheFdbControlTimeStamp, sheFdbControlTimer, sheFdbControlReqResult } STATUS current DESCRIPTION "Description." ::= { sheFdbGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.4.5.2.4 sheFdbNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheFdbBaseAgeingTimeChanged, sheFdbBaseLearningUplinkChanged, sheFdbTableUpdated, sheFdbStaticMacCreated } STATUS current DESCRIPTION "Description." ::= { sheFdbGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5 sheLag OBJECT IDENTIFIER ::= { sheBridgeMib 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1 sheLagGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SheLagGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contain allways two entrys for possible available Lag-Groups." ::= { sheLag 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1 sheLagGroupEntry OBJECT-TYPE SYNTAX SheLagGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each possible lag-group." INDEX { ifIndex } ::= { sheLagGroupTable 1 } SheLagGroupEntry ::= SEQUENCE { sheLagGroupMacAddress OCTET STRING, sheLagGroupActorSystemPriority Unsigned32, sheLagGroupActorSystemId OCTET STRING, sheLagGroupAggregateOrIndividual TruthValue, sheLagGroupActorAdminKey Integer32, sheLagGroupActorOperKey Integer32, sheLagGroupPartnerSystemId OCTET STRING, sheLagGroupPartnerSystemPriority Integer32, sheLagGroupPartnerOperKey Integer32, sheLagGroupCollectorMaxDelay Integer32, sheLagGroupLacpActivity TruthValue, sheLagGroupMethod SheLagMethodType, sheLagGroupPortList OCTET STRING, sheLagGroupEntPhysicalIndex PhysicalIndex } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.1 sheLagGroupMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator." REFERENCE "IEEE 802.3 Section 30.7.1.1.9" ::= { sheLagGroupEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.2 sheLagGroupActorSystemPriority OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet value indicating the priority value associated with the Actor's System ID." REFERENCE "IEEE 802.3 Section 30.7.1.1.5" ::= { sheLagGroupEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.3 sheLagGroupActorSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator." REFERENCE "IEEE 802.3 Section 30.7.1.1.4" ::= { sheLagGroupEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.4 sheLagGroupAggregateOrIndividual OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE')." REFERENCE "IEEE 802.3 Section 30.7.1.1.6" ::= { sheLagGroupEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.5 sheLagGroupActorAdminKey OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Section 30.7.1.1.7" ::= { sheLagGroupEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.6 sheLagGroupActorOperKey OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Section 30.7.1.1.8" ::= { sheLagGroupEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.7 sheLagGroupPartnerSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Section 30.7.1.1.10" ::= { sheLagGroupEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.8 sheLagGroupPartnerSystemPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Section 30.7.1.1.11" ::= { sheLagGroupEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.9 sheLagGroupPartnerOperKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit, read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Section 30.7.1.1.12" ::= { sheLagGroupEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.10 sheLagGroupCollectorMaxDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this 16-bit attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1). Note: R2.8 will not longer accept any modification of this parameter and use always NE internal value." REFERENCE "IEEE 802.3 Section 30.7.1.1.31" ::= { sheLagGroupEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.11 sheLagGroupLacpActivity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute will enable or disable LACP-Activity for this Lag-Group." DEFVAL { false } ::= { sheLagGroupEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.12 sheLagGroupMethod OBJECT-TYPE SYNTAX SheLagMethodType MAX-ACCESS read-only STATUS current DESCRIPTION "Possible values: srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6)" ::= { sheLagGroupEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.13 sheLagGroupPortList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "Portlist for all member's of this LAG. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet." REFERENCE "IEEE 802.3 Section 30.7.1.1.30" ::= { sheLagGroupEntry 13 } sheLagGroupEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute describes the entPhysicalIndex of the card, where this LAG group is placed. Only LagPorts with identical entPhysicalIndex for the card could be added to a group. This information is given via: sheLagGroupPortList -> sheLagPortEntry -> sheBridgePortIndex -> sheSublayerIndex -> ifIndex -> shePhysPortEntPhysicalIndex" ::= { sheLagGroupEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2 sheLagPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheLagPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. For she, this table will contain allways 4 entrys." ::= { sheLag 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1 sheLagPortEntry OBJECT-TYPE SYNTAX SheLagPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device." INDEX { sheBridgePortIndex } ::= { sheLagPortTable 1 } SheLagPortEntry ::= SEQUENCE { sheLagPortActorSystemPriority Integer32, sheLagPortActorSystemId OCTET STRING, sheLagPortActorAdminKey Integer32, sheLagPortActorOperKey Integer32, sheLagPortPartnerAdminSystemPriority Integer32, sheLagPortPartnerOperSystemPriority Integer32, sheLagPortPartnerAdminSystemId OCTET STRING, sheLagPortPartnerOperSystemId OCTET STRING, sheLagPortPartnerAdminKey Integer32, sheLagPortPartnerOperKey Integer32, sheLagPortSelectedAggId Integer32, sheLagPortAttachedAggId Integer32, sheLagPortActorPort Integer32, sheLagPortActorPortPriority Integer32, sheLagPortPartnerAdminPort Integer32, sheLagPortPartnerOperPort Integer32, sheLagPortPartnerAdminPortPriority Integer32, sheLagPortPartnerOperPortPriority Integer32, sheLagPortActorAdminState SheLagStateType, sheLagPortActorOperState SheLagStateType, sheLagPortPartnerAdminState SheLagStateType, sheLagPortPartnerOperState SheLagStateType, sheLagPortAggregateOrIndividual TruthValue, sheLagPortLacpAvailability TruthValue } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.1 sheLagPortActorSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet value used to define the priority value associated with the Actor's System ID." ::= { sheLagPortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.2 sheLagPortActorSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port." ::= { sheLagPortEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.3 sheLagPortActorAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregation Port. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance." ::= { sheLagPortEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.4 sheLagPortActorOperKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregation Port. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance." ::= { sheLagPortEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.5 sheLagPortPartnerAdminSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemID, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation." ::= { sheLagPortEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.6 sheLagPortPartnerOperSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemPriority if there is no protocol Partner." ::= { sheLagPortEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.7 sheLagPortPartnerAdminSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation." ::= { sheLagPortEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.8 sheLagPortPartnerOperSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemID if there is no protocol Partner." ::= { sheLagPortEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.9 sheLagPortPartnerAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current administrative value of the Key for the protocol Partner. This is a 16-bit, read-write value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation." ::= { sheLagPortEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.10 sheLagPortPartnerOperKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminKey if there is no protocol Partner. This is a 16-bit, read-only value." ::= { sheLagPortEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.11 sheLagPortSelectedAggId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only." ::= { sheLagPortEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.12 sheLagPortAttachedAggId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only." ::= { sheLagPortEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.13 sheLagPortActorPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only." ::= { sheLagPortEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.14 sheLagPortActorPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port. This is a 2-octet value." ::= { sheLagPortEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.15 sheLagPortPartnerAdminPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current administrative value of the port number for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority,PortPartnerAdminSystemID, PartnerAdminKey, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation." ::= { sheLagPortEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.16 sheLagPortPartnerOperPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only." ::= { sheLagPortEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.17 sheLagPortPartnerAdminPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The current administrative value of the port priority for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminKey, and PortPartnerAdminPort, in order to achieve manually configured aggregation." ::= { sheLagPortEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.18 sheLagPortPartnerOperPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminPortPriority if there is no." ::= { sheLagPortEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19 sheLagPortActorAdminState OBJECT-TYPE SYNTAX SheLagStateType MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit of string corresponds to bit 7 (Expired). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is in the EXPIRED state The second of string bit corresponds to bit 6 (Defaulted). If TRUE (encoded as a 1), this flag indicates that the Actors receive machine is using Defaulted operational Partner information, administratively configured for the Partner. The third of string bit corresponds to bit 5 (Distributing). FALSE (encoded as a 0) means distribution of outgoing frames on this link is definitely disabled. The fourth of string bit corresponds to bit 4(Collecting). TRUE (encoded as a 1) means collection of incoming frames on this link is definitely enabled. The fifth of string bit corresponds to bit 3 (Synchronization). If FALSE (encoded as a 0), then this link is currently OUT_OF_SYNC, i.e., it is not in the right Aggregation. The sixth of string bit corresponds to bit 2 (Aggregation). If FALSE (encoded as a 0), the link is considered to be Individual, i.e., this link can be operated only as an individual link. The seventh of string bit corresponds to bit 1 (LACP_Timeout). Short Timeout is encoded as a 1; Long Timeout is encoded as a 0. The eighth of string bit corresponds to bit 0 of Actor_State (LACP_Activity). Active LACP is encoded as a 1; Passive LACP is encoded as a 0. The values of LACP_Activity,LACP_Timeout and Aggregation allow administrative control and could be set by controlgroup. " ::= { sheLagPortEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.20 sheLagPortActorOperState OBJECT-TYPE SYNTAX SheLagStateType MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs." ::= { sheLagPortEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.21 sheLagPortPartnerAdminState OBJECT-TYPE SYNTAX SheLagStateType MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The assigned value is used in order to achieve manually configured aggregation." ::= { sheLagPortEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.22 sheLagPortPartnerOperState OBJECT-TYPE SYNTAX SheLagStateType MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. In the absence of an active protocol Partner, this value may reflect the manually configured value PortPartnerAdminState. This attribute value is read-only." ::= { sheLagPortEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.23 sheLagPortAggregateOrIndividual OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE')." ::= { sheLagPortEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.24 sheLagPortLacpAvailability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates, if this port is available for lacp or not." DEFVAL { false } ::= { sheLagPortEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3 sheLagControl OBJECT IDENTIFIER ::= { sheLag 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.1 sheLagControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyLagGroupEntry: sheLagControlIndex sheLagControlGroupActorSystemPriority sheLagControlGroupActorAdminKey sheLagControlGroupCollectorMaxDelay sheLagControlGroupLacpActivity sheLagControlGroupMethod modifyLagPortEntry: sheLagControlIndex sheLagControlPortActorAdminKey sheLagControlPortActorPortPriority sheLagControlPortActorAdminState sheLagControlPortLacpAvailability assignBridgePortToLag: sheLagControlIndex sheLagControlGroupPortList unassignBridgePortFromLag: sheLagControlIndex sheLagControlGroupPortList " ::= { sheLagControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.2 sheLagControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the table entry to be configured." ::= { sheLagControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.3 sheLagControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheLagControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.4 sheLagControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheLagControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.5 sheLagControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheLagControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.6 sheLagControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheLagControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.7 sheLagControlGroupActorSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description..." ::= { sheLagControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.8 sheLagControlGroupActorAdminKey OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description..." ::= { sheLagControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.9 sheLagControlGroupCollectorMaxDelay OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description... Note: R2.8 will not longer use any modification of this parameter and use always NE internal value. A modification will be ignored." ::= { sheLagControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.10 sheLagControlGroupPortList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description..." ::= { sheLagControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.11 sheLagControlGroupLacpActivity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description..." ::= { sheLagControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.12 sheLagControlGroupMethod OBJECT-TYPE SYNTAX SheLagMethodType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at group-table description..." ::= { sheLagControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.13 sheLagControlPortActorAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Look at port-table description..." ::= { sheLagControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.14 sheLagControlPortActorPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at port-table description..." ::= { sheLagControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.15 sheLagControlPortActorAdminState OBJECT-TYPE SYNTAX SheLagStateType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at port-table description...Only bit 0, 1 and 2 could be configured." ::= { sheLagControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.16 sheLagControlPortLacpAvailability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Look at port-table description..." ::= { sheLagControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4 sheLagNotifications OBJECT IDENTIFIER ::= { sheLag 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.1 sheLagGroupEntryModified NOTIFICATION-TYPE OBJECTS { sheLagControlIndex, sheLagControlTimeStamp, sheLagControlGroupActorSystemPriority, sheLagControlGroupActorAdminKey, sheLagControlGroupCollectorMaxDelay, sheLagControlGroupLacpActivity, sheLagControlGroupMethod } STATUS current DESCRIPTION "Configuration notification." ::= { sheLagNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.2 sheLagPortEntryModified NOTIFICATION-TYPE OBJECTS { sheLagControlIndex, sheLagControlTimeStamp, sheLagControlPortActorAdminKey, sheLagControlPortActorPortPriority, sheLagControlPortActorAdminState, sheLagControlPortLacpAvailability } STATUS current DESCRIPTION "Configuration notification." ::= { sheLagNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.3 sheLagBridgePortAssigned NOTIFICATION-TYPE OBJECTS { sheLagControlIndex, sheLagControlTimeStamp, sheLagControlGroupPortList } STATUS current DESCRIPTION "LagGroup-Portlist changed notification." ::= { sheLagNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.4 sheLagBridgePortUnassigned NOTIFICATION-TYPE OBJECTS { sheLagControlIndex, sheLagControlTimeStamp, sheLagControlGroupPortList } STATUS current DESCRIPTION "LagGroup-Portlist changed notification." ::= { sheLagNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5 sheLagConformance OBJECT IDENTIFIER ::= { sheLag 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.1 sheLagCompliances OBJECT IDENTIFIER ::= { sheLagConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.1.1 -- this module -- this module sheLagCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheLagGroup, sheLagPortGroup, sheLagControlGroup, sheLagNotificationGroup } ::= { sheLagCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.2 sheLagGroups OBJECT IDENTIFIER ::= { sheLagConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.2.1 sheLagGroup OBJECT-GROUP OBJECTS { sheLagGroupMacAddress, sheLagGroupActorSystemPriority, sheLagGroupActorSystemId, sheLagGroupAggregateOrIndividual, sheLagGroupActorAdminKey, sheLagGroupActorOperKey, sheLagGroupPartnerSystemId, sheLagGroupPartnerSystemPriority, sheLagGroupPartnerOperKey, sheLagGroupCollectorMaxDelay, sheLagGroupLacpActivity, sheLagGroupMethod, sheLagGroupPortList, sheLagGroupEntPhysicalIndex } STATUS current DESCRIPTION "Description." ::= { sheLagGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.2.2 sheLagPortGroup OBJECT-GROUP OBJECTS { sheLagPortActorSystemPriority, sheLagPortActorSystemId, sheLagPortActorAdminKey, sheLagPortActorOperKey, sheLagPortPartnerAdminSystemPriority, sheLagPortPartnerOperSystemPriority, sheLagPortPartnerAdminSystemId, sheLagPortPartnerOperSystemId, sheLagPortPartnerAdminKey, sheLagPortPartnerOperKey, sheLagPortSelectedAggId, sheLagPortAttachedAggId, sheLagPortActorPort, sheLagPortActorPortPriority, sheLagPortPartnerAdminPort, sheLagPortPartnerOperPort, sheLagPortPartnerAdminPortPriority, sheLagPortPartnerOperPortPriority, sheLagPortActorAdminState, sheLagPortActorOperState, sheLagPortPartnerAdminState, sheLagPortPartnerOperState, sheLagPortAggregateOrIndividual, sheLagPortLacpAvailability } STATUS current DESCRIPTION "Description." ::= { sheLagGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.2.3 sheLagControlGroup OBJECT-GROUP OBJECTS { sheLagControlRequest, sheLagControlIndex, sheLagControlStatus, sheLagControlTimer, sheLagControlReqResult, sheLagControlTimeStamp, sheLagControlGroupActorSystemPriority, sheLagControlGroupActorAdminKey, sheLagControlGroupCollectorMaxDelay, sheLagControlGroupPortList, sheLagControlGroupLacpActivity, sheLagControlGroupMethod, sheLagControlPortActorAdminKey, sheLagControlPortActorPortPriority, sheLagControlPortActorAdminState, sheLagControlPortLacpAvailability } STATUS current DESCRIPTION "Description." ::= { sheLagGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.5.5.2.4 sheLagNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheLagGroupEntryModified, sheLagPortEntryModified, sheLagBridgePortAssigned, sheLagBridgePortUnassigned } STATUS current DESCRIPTION "Description." ::= { sheLagGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6 sheDhcpRelay OBJECT IDENTIFIER ::= { sheBridgeMib 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1 sheDhcpBase OBJECT IDENTIFIER ::= { sheDhcpRelay 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1 sheDhcpRelayAdminState OBJECT-TYPE SYNTAX SheDhcpRelayAdminStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Globaly enable/disable of Dhcp/PPPoE agent. Telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded (currently NO support) handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop valid values: up(1), -> releases >= R2.5 run now dhcpPppoeRelayRelay mode down(2), -> releases >= R2.5 run now dhcpPppoeSnoopSnoop mode dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), (currently NO support) dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), (currently NO support) dhcpPppoeBridgeRelay(10),(currently NO support) dhcpPppoeBridgeSnoop(11),(currently NO support) dhcpPppoeBridgeBridge(12)(currently NO support) NOTE: Only release R2.5 and higher can accept new value's 4..12 depending on the state of implementation in NE. " ::= { sheDhcpBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.3.4.6.1.2 sheDhcpRelayRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..64)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. Moved to sheBridgePortTable and sheBridgeBase. (obsolete)" ::= { sheDhcpBase 2 } sheDhcpUseInnerTagForProtocols OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all DHCP providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8." DEFVAL { false } ::= { sheDhcpBase 3 } shePppoeUseInnerTagForProtocols OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all PPPoE providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8." DEFVAL { false } ::= { sheDhcpBase 4 } sheDhcpStationMoveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8." DEFVAL { false } ::= { sheDhcpBase 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2 sheDhcpProviderTable OBJECT-TYPE SYNTAX SEQUENCE OF SheDhcpProviderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dhcp/pppoe provider table." ::= { sheDhcpRelay 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1 sheDhcpProviderEntry OBJECT-TYPE SYNTAX SheDhcpProviderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each known dhcp or pppoe provider (depends on the option settings)." INDEX { sheDhcpProviderIndex } ::= { sheDhcpProviderTable 1 } SheDhcpProviderEntry ::= SEQUENCE { sheDhcpProviderIndex Unsigned32, sheDhcpProviderName OCTET STRING, sheDhcpServerIpAddress1 OCTET STRING, sheDhcpServerIpAddress2 OCTET STRING, sheDhcpServerIpAddress3 OCTET STRING, sheDhcpServerGateway OCTET STRING, sheDhcpVlanId Integer32, sheDhcpRelayAgentIpAddress OCTET STRING, sheDhcpRelayAgentNetmask OCTET STRING, sheDhcpRelayAgentOption SheDhcpRelayAgentOptionType, sheDhcpCebsMacTranslation TruthValue, sheDhcpRelayAgentMgmt TruthValue, sheDhcpInnerVlanId Integer32, sheDhcpBcastTranslationDs TruthValue, sheDhcpLinePropertyNodeIdentifier OCTET STRING, sheDhcpServerIpAddress4 OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.1 sheDhcpProviderIndex OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "A table index." ::= { sheDhcpProviderEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.2 sheDhcpProviderName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Descriptional name. Spaces and other special characters (: ?) are not allowed!! " ::= { sheDhcpProviderEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.3 sheDhcpServerIpAddress1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!" ::= { sheDhcpProviderEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.4 sheDhcpServerIpAddress2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!" ::= { sheDhcpProviderEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.5 sheDhcpServerIpAddress3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!" ::= { sheDhcpProviderEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.6 sheDhcpServerGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The gateway address of this dhcp provider. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable." ::= { sheDhcpProviderEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.7 sheDhcpVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "That points to the VLAN, where the request should be send. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId." ::= { sheDhcpProviderEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.8 sheDhcpRelayAgentIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent." ::= { sheDhcpProviderEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.9 sheDhcpRelayAgentNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The RelayAgent Netmask. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheDhcpProviderEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.10 sheDhcpRelayAgentOption OBJECT-TYPE SYNTAX SheDhcpRelayAgentOptionType MAX-ACCESS read-only STATUS current DESCRIPTION "Option 82, depends on the Dhcp - Server functionality. If PPPoE is configured also special Options could be implemented. With R2.7 additional options for LineProperty are possible (value 12..23)." DEFVAL { 0 } ::= { sheDhcpProviderEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.11 sheDhcpCebsMacTranslation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers." DEFVAL { false } ::= { sheDhcpProviderEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.12 sheDhcpRelayAgentMgmt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay." ::= { sheDhcpProviderEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.13 sheDhcpInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The index of inner-vlan when to forward Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId." ::= { sheDhcpProviderEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.14 sheDhcpBcastTranslationDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers." ::= { sheDhcpProviderEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.16 sheDhcpLinePropertyNodeIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7." ::= { sheDhcpProviderEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.5 sheDhcpServerIpAddress4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Now there are four entrys and all of them backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. New with R2.8 maintenance." ::= { sheDhcpProviderEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3 sheDhcpControl OBJECT IDENTIFIER ::= { sheDhcpRelay 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.1 sheDhcpControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setDhcpAdminState: sheDhcpControlRelayAdminState Depending on the used RelayAgentOption value, not all values are needed. If a PPPoE or simplified option is used, only the values Name and AgentOption are mandatory. createDhcpProviderEntry: sheDhcpControlProfileName sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentOption sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) modifyDhcpProviderEntry: sheDhcpControlIndex sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlRelayAgentOption sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) deleteDhcpProviderEntry: sheDhcpControlIndex New with R2.8: setDhcpTagForProtocol: sheDhcpControlUseInnerTagForProtocols setDhcpStationMove: sheDhcpControlStationMoveEnabled" ::= { sheDhcpControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.2 sheDhcpControlIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "The table index to be configured." ::= { sheDhcpControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.3 sheDhcpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheDhcpControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.4 sheDhcpControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheDhcpControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.5 sheDhcpControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheDhcpControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.6 sheDhcpControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheDhcpControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.7 sheDhcpControlRelayAdminState OBJECT-TYPE SYNTAX SheDhcpRelayAdminStateType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at base parameter description..." ::= { sheDhcpControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.8 sheDhcpControlRelayRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Per default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. (obsoleted in V135)" ::= { sheDhcpControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.9 sheDhcpControlProviderName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description... Spaces and other special characters (: ?) are not allowed!! " ::= { sheDhcpControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.10 sheDhcpControlServerIpAddress1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description..." ::= { sheDhcpControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.11 sheDhcpControlServerIpAddress2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description..." ::= { sheDhcpControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.12 sheDhcpControlServerIpAddress3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description..." ::= { sheDhcpControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.13 sheDhcpControlServerGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description... Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable." ::= { sheDhcpControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.14 sheDhcpControlVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description... Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId." ::= { sheDhcpControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.15 sheDhcpControlRelayAgentIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent." ::= { sheDhcpControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.16 sheDhcpControlRelayAgentNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The RelayAgent Netmask. Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheDhcpControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.17 sheDhcpControlRelayAgentOption OBJECT-TYPE SYNTAX SheDhcpRelayAgentOptionType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description... With R2.7 additional options for LineProperty are possible (value 12..23)." ::= { sheDhcpControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.18 sheDhcpControlCebsMacTranslation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "configuration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers." ::= { sheDhcpControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.19 sheDhcpControlRelayAgentMgmt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay." ::= { sheDhcpControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.20 sheDhcpControlInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of inner-vlan when to forward Dhcp Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. Only valid for simplified DHCP agent configuration. Look at table description. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId." ::= { sheDhcpControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.21 sheDhcpControlBcastTranslationDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers." ::= { sheDhcpControl 21 } sheDhcpControlUseInnerTagForProtocols OBJECT-TYPE SYNTAX SheDhcpUseTagForProtocolsType MAX-ACCESS read-write STATUS current DESCRIPTION "Used for configuration of global DHCP and PPPoE useTag settings. BITS { dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1) } If bit is set to 1 the corresponding global parameter is set to true. Support with R2.8." ::= { sheDhcpControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.23 sheDhcpControlLinePropertyNodeIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7." ::= { sheDhcpControl 23 } sheDhcpControlStationMoveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8." DEFVAL { false } ::= { sheDhcpControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.26 sheDhcpControlServerIpAddress4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description..." ::= { sheDhcpControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.5 sheDhcpNotifications OBJECT IDENTIFIER ::= { sheDhcpRelay 5 } sheDhcpProviderEntryCreated NOTIFICATION-TYPE OBJECTS { sheDhcpControlIndex, sheDhcpControlTimeStamp, sheDhcpControlProviderName, sheDhcpControlServerIpAddress1, sheDhcpControlServerIpAddress2, sheDhcpControlServerIpAddress3, sheDhcpControlServerGateway, sheDhcpControlVlanId, sheDhcpControlRelayAgentOption, sheDhcpControlRelayAgentIpAddress, sheDhcpControlRelayAgentNetmask, sheDhcpControlCebsMacTranslation, sheDhcpControlRelayAgentMgmt, sheDhcpControlInnerVlanId, sheDhcpControlBcastTranslationDs, sheDhcpControlLinePropertyNodeIdentifier, sheDhcpControlServerIpAddress4 } STATUS current DESCRIPTION "A new dhcp provider table entry was created." ::= { sheDhcpNotifications 1 } sheDhcpProviderEntryModified NOTIFICATION-TYPE OBJECTS { sheDhcpControlIndex, sheDhcpControlTimeStamp, sheDhcpControlProviderName, sheDhcpControlServerIpAddress1, sheDhcpControlServerIpAddress2, sheDhcpControlServerIpAddress3, sheDhcpControlServerGateway, sheDhcpControlVlanId, sheDhcpControlRelayAgentOption, sheDhcpControlRelayAgentIpAddress, sheDhcpControlRelayAgentNetmask, sheDhcpControlCebsMacTranslation, sheDhcpControlRelayAgentMgmt, sheDhcpControlInnerVlanId, sheDhcpControlBcastTranslationDs, sheDhcpControlLinePropertyNodeIdentifier, sheDhcpControlServerIpAddress4 } STATUS current DESCRIPTION "A dhcp provider table entry was modified." ::= { sheDhcpNotifications 2 } sheDhcpProviderEntryDeleted NOTIFICATION-TYPE OBJECTS { sheDhcpControlIndex, sheDhcpControlTimeStamp, sheDhcpControlProviderName } STATUS current DESCRIPTION "A dhcp provider table entry was deleted." ::= { sheDhcpNotifications 3 } sheDhcpRelayAdminStateModified NOTIFICATION-TYPE OBJECTS { sheDhcpRelayAdminState, sheDhcpControlReqResult, sheDhcpControlTimeStamp } STATUS current DESCRIPTION "The dhcp relay admin state was modified." ::= { sheDhcpNotifications 4 } sheDhcpRelayOptionModified NOTIFICATION-TYPE OBJECTS { sheDhcpControlIndex, sheDhcpControlTimeStamp, sheDhcpControlRelayAgentOption } STATUS current DESCRIPTION "The dhcp relay option was modified." ::= { sheDhcpNotifications 5 } sheDhcpRelayRemoteIdModified NOTIFICATION-TYPE OBJECTS { sheDhcpControlTimeStamp, sheDhcpControlRelayRemoteId, sheDhcpControlReqResult } STATUS obsolete DESCRIPTION "The dhcp relay remote id was modified." ::= { sheDhcpNotifications 6 } sheDhcpFloodVlanIdAdded NOTIFICATION-TYPE OBJECTS { sheDhcpFloodVlanIdControlTimeStamp, sheDhcpFloodVlanIdControlVlanId } STATUS current DESCRIPTION "The dhcp flood vlanid was added. It becomes obsolete." ::= { sheDhcpNotifications 7 } sheDhcpFloodVlanIdDeleted NOTIFICATION-TYPE OBJECTS { sheDhcpFloodVlanIdControlTimeStamp, sheDhcpFloodVlanIdControlVlanId } STATUS current DESCRIPTION "The dhcp flood vlanid was deleted. It becomes obsolete." ::= { sheDhcpNotifications 8 } sheDhcpFloodVlanIdModified NOTIFICATION-TYPE OBJECTS { sheDhcpFloodVlanIdControlTimeStamp, sheDhcpFloodVlanIdControlVlanId, sheDhcpFloodVlanIdControlVlanEnabled } STATUS current DESCRIPTION "The dhcp flood vlanid was modified." ::= { sheDhcpNotifications 9 } sheDhcpTagForProtocolsModified NOTIFICATION-TYPE OBJECTS { sheDhcpControlTimeStamp, sheDhcpUseInnerTagForProtocols, shePppoeUseInnerTagForProtocols } STATUS current DESCRIPTION "The dhcp and pppoe global useTag options were modified." ::= { sheDhcpNotifications 10 } sheDhcpStationMoveEnableModified NOTIFICATION-TYPE OBJECTS { sheDhcpControlTimeStamp, sheDhcpControlStationMoveEnabled } STATUS current DESCRIPTION "The dhcp station move enable switch was modified." ::= { sheDhcpNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7 sheDhcpFloodVlanIdTable OBJECT-TYPE SYNTAX SEQUENCE OF SheDhcpFloodVlanIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dhcp flood vlanid table." ::= { sheDhcpRelay 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1 sheDhcpFloodVlanIdEntry OBJECT-TYPE SYNTAX SheDhcpFloodVlanIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each dhcp flood vlanid." INDEX { sheDhcpFloodVlanId } ::= { sheDhcpFloodVlanIdTable 1 } SheDhcpFloodVlanIdEntry ::= SEQUENCE { sheDhcpFloodVlanId Integer32, sheDhcpFloodVlanEnabled SheDhcpFloodingType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.2 sheDhcpFloodVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of that table. Will be identical to the used sheVlanIndex." ::= { sheDhcpFloodVlanIdEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.2 sheDhcpFloodVlanEnabled OBJECT-TYPE SYNTAX SheDhcpFloodingType MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable a flooding vlan for DHCP packets. The default is false. New with R2.8: Flooding of DHCP or PPPoE packets could now be separatly enabled. The former command switch always both protocol types." DEFVAL { disableFloodingDhcpAndPppoE } ::= { sheDhcpFloodVlanIdEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8 sheDhcpFloodVlanIdControl OBJECT IDENTIFIER ::= { sheDhcpRelay 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.1 sheDhcpFloodVlanIdControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " setDhcpFloodVlanId: sheDhcpFloodVlanIdControlVlanId sheDhcpFloodVlanIdControlVlanEnabled " ::= { sheDhcpFloodVlanIdControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.2 sheDhcpFloodVlanIdControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a control request" ::= { sheDhcpFloodVlanIdControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.3 sheDhcpFloodVlanIdControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. The manager reads this value from the SHE." ::= { sheDhcpFloodVlanIdControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.4 sheDhcpFloodVlanIdControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command" ::= { sheDhcpFloodVlanIdControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.5 sheDhcpFloodVlanIdControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)" ::= { sheDhcpFloodVlanIdControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.6 sheDhcpFloodVlanIdControlVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID which is controlled for Dhcp flooding" ::= { sheDhcpFloodVlanIdControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.7 sheDhcpFloodVlanIdControlVlanEnabled OBJECT-TYPE SYNTAX SheDhcpFloodingType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. Expanded with R2.8 maintenance." ::= { sheDhcpFloodVlanIdControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6 sheDhcpConformance OBJECT IDENTIFIER ::= { sheDhcpRelay 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.1 sheDhcpCompliances OBJECT IDENTIFIER ::= { sheDhcpConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.1.1 -- this module -- this module sheDhcpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheDhcpBaseGroup, sheDhcpProviderGroup, sheDhcpControlGroup, sheDhcpNotificationGroup } ::= { sheDhcpCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2 sheDhcpRelayGroups OBJECT IDENTIFIER ::= { sheDhcpConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.1 sheDhcpBaseGroup OBJECT-GROUP OBJECTS { sheDhcpRelayAdminState, sheDhcpUseInnerTagForProtocols, shePppoeUseInnerTagForProtocols, sheDhcpStationMoveEnabled } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.2 sheDhcpProviderGroup OBJECT-GROUP OBJECTS { sheDhcpServerIpAddress1, sheDhcpServerIpAddress2, sheDhcpServerIpAddress3, sheDhcpRelayAgentIpAddress, sheDhcpRelayAgentMgmt, sheDhcpBcastTranslationDs, sheDhcpLinePropertyNodeIdentifier, sheDhcpRelayAgentOption, sheDhcpProviderIndex, sheDhcpProviderName, sheDhcpCebsMacTranslation, sheDhcpServerIpAddress4 } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.3 sheDhcpControlGroup OBJECT-GROUP OBJECTS { sheDhcpControlRequest, sheDhcpControlIndex, sheDhcpControlStatus, sheDhcpControlRelayAdminState, sheDhcpControlServerIpAddress1, sheDhcpControlServerIpAddress2, sheDhcpControlServerIpAddress3, sheDhcpControlServerGateway, sheDhcpControlVlanId, sheDhcpControlTimeStamp, sheDhcpControlRelayAgentIpAddress, sheDhcpControlRelayAgentNetmask, sheDhcpControlRelayAgentMgmt, sheDhcpControlInnerVlanId, sheDhcpControlBcastTranslationDs, sheDhcpControlUseInnerTagForProtocols, sheDhcpControlLinePropertyNodeIdentifier, sheDhcpControlRelayAgentOption, sheDhcpControlTimer, sheDhcpControlReqResult, sheDhcpControlProviderName, sheDhcpControlCebsMacTranslation, sheDhcpControlStationMoveEnabled, sheDhcpControlServerIpAddress4 } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.4 sheDhcpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheDhcpRelayAdminStateModified, sheDhcpTagForProtocolsModified, sheDhcpRelayOptionModified, sheDhcpProviderEntryCreated, sheDhcpProviderEntryModified, sheDhcpProviderEntryDeleted, sheDhcpFloodVlanIdAdded, sheDhcpFloodVlanIdDeleted, sheDhcpFloodVlanIdModified, sheDhcpStationMoveEnableModified } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.5 sheDhcpFloodVlanIdGroup OBJECT-GROUP OBJECTS { sheDhcpFloodVlanEnabled, sheDhcpFloodVlanId } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.6.6.2.6 sheDhcpFloodVlanIdControlGroup OBJECT-GROUP OBJECTS { sheDhcpFloodVlanIdControlRequest, sheDhcpFloodVlanIdControlStatus, sheDhcpFloodVlanIdControlTimer, sheDhcpFloodVlanIdControlReqResult, sheDhcpFloodVlanIdControlTimeStamp, sheDhcpFloodVlanIdControlVlanId, sheDhcpFloodVlanIdControlVlanEnabled } STATUS current DESCRIPTION "Description." ::= { sheDhcpRelayGroups 6 } sheDhcpObsoleteGroup OBJECT-GROUP OBJECTS { sheDhcpRelayRemoteId, sheDhcpControlRelayRemoteId, sheDhcpServerGateway, sheDhcpVlanId, sheDhcpRelayAgentNetmask, sheDhcpInnerVlanId } STATUS obsolete DESCRIPTION "Description." ::= { sheDhcpRelayGroups 7 } sheDhcpObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheDhcpRelayRemoteIdModified } STATUS obsolete DESCRIPTION "Description." ::= { sheDhcpRelayGroups 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7 sheIgmp OBJECT IDENTIFIER ::= { sheBridgeMib 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2 sheIgmpBase OBJECT IDENTIFIER ::= { sheIgmp 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.2 sheIgmpMode OBJECT-TYPE SYNTAX SheIgmpModeType MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP operation mode can be off proxy That is the general NE igmp on/off switch. " ::= { sheIgmpBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.3 sheIgmpVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The version of IGMP which is running on this interface (detected by the NE). The NE uses version 2 as default. If version 1 members are detected on the IP subnet attached to this interface, the NE falls back to version 1. Note: This parameter is not longer supported starting with release SHE R2.8 The used version should be configured per IGMP profileVlan entry." ::= { sheIgmpBase 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.4 sheIgmpMaxJoinedSubscriber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The maximum number of subscribers who can join a multicast group in the system. Note: This parameter is not longer supported starting with release SHE R2.6." DEFVAL { 400 } ::= { sheIgmpBase 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.5 sheIgmpMaxJoinedGroup OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of multicast groups that could be joined in the system." DEFVAL { 1000 } ::= { sheIgmpBase 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.6 sheIgmpVlanTranslationMode OBJECT-TYPE SYNTAX SheIgmpVlanMode MAX-ACCESS read-only STATUS current DESCRIPTION "Configure VLAN translation mode for the system. 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8." DEFVAL { inner } ::= { sheIgmpBase 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.7 sheIgmpVlanDoubleTaggingMode OBJECT-TYPE SYNTAX SheIgmpVlanMode MAX-ACCESS read-only STATUS current DESCRIPTION "Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. " DEFVAL { outer } ::= { sheIgmpBase 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9 sheIgmpDoubleTaggingControl OBJECT IDENTIFIER ::= { sheIgmpBase 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.1 sheIgmpDoubleTaggingControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "New with SHE R.8. setIgmpTagMode: sheIgmpControlVlanTranslationMode sheIgmpControlVlanDoubleTaggingMode" ::= { sheIgmpDoubleTaggingControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.2 sheIgmpDoubleTaggingControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpDoubleTaggingControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.3 sheIgmpDoubleTaggingControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpDoubleTaggingControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.4 sheIgmpDoubleTaggingControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpDoubleTaggingControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.5 sheIgmpDoubleTaggingControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpDoubleTaggingControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.6 sheIgmpControlVlanTranslationMode OBJECT-TYPE SYNTAX SheIgmpVlanMode MAX-ACCESS read-write STATUS current DESCRIPTION "Configure VLAN translation mode for the system, 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8." ::= { sheIgmpDoubleTaggingControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.7 sheIgmpControlVlanDoubleTaggingMode OBJECT-TYPE SYNTAX SheIgmpVlanMode MAX-ACCESS read-write STATUS current DESCRIPTION "Configure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8. " ::= { sheIgmpDoubleTaggingControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5 sheIgmpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table has one provider entry. It contains the provider VLAN and the host and querier settings." ::= { sheIgmp 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1 sheIgmpProfileEntry OBJECT-TYPE SYNTAX SheIgmpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "In first release we will only support one table entry." INDEX { sheIgmpProviderIndex } ::= { sheIgmpProfileTable 1 } SheIgmpProfileEntry ::= SEQUENCE { sheIgmpProviderIndex Unsigned32, sheIgmpProviderProfileName DisplayString, sheIgmpProviderProxyIpAddress OCTET STRING, sheIgmpProviderRobustness Unsigned32, sheIgmpProviderQueryInterval Unsigned32, sheIgmpProviderQueryResponseInterval Unsigned32, sheIgmpProviderStartupQueryInterval Unsigned32, sheIgmpProviderStartupQueryCount Unsigned32, sheIgmpProviderLastMemberQueryInterval Unsigned32, sheIgmpProviderLastMemberQueryCount Unsigned32, sheIgmpProviderImmediateLeave ShePermissionType, sheIgmpProviderUnsolicitedReportInterval Unsigned32, sheIgmpProviderVersion1RouterTimeout Unsigned32, sheIgmpProviderVersion1RouterPresentTimeout TimeTicks, sheIgmpProviderVlanMulticastLimitation TruthValue, sheIgmpProviderMcastBandwithLimit Unsigned32, sheIgmpProviderDefaultChannelBandwith Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.1 sheIgmpProviderIndex OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "A table Index." ::= { sheIgmpProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.2 sheIgmpProviderProfileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name for easy profile handling. Spaces and other special characters (: ?) are not allowed!! " ::= { sheIgmpProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.3 sheIgmpProviderProxyIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction." ::= { sheIgmpProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.4 sheIgmpProviderRobustness OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. " DEFVAL { 2 } ::= { sheIgmpProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.5 sheIgmpProviderQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (10..250) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface." DEFVAL { 125 } ::= { sheIgmpProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.6 sheIgmpProviderQueryResponseInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "1/10 seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval." DEFVAL { 100 } ::= { sheIgmpProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.7 sheIgmpProviderStartupQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface." ::= { sheIgmpProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.8 sheIgmpProviderStartupQueryCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval." DEFVAL { 2 } ::= { sheIgmpProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.9 sheIgmpProviderLastMemberQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "1/10 seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. " DEFVAL { 10 } ::= { sheIgmpProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.10 sheIgmpProviderLastMemberQueryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. " DEFVAL { 2 } ::= { sheIgmpProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.11 sheIgmpProviderImmediateLeave OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. Note: Not longer configurable with R2.8." ::= { sheIgmpProfileEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.12 sheIgmpProviderUnsolicitedReportInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream)." DEFVAL { 10 } ::= { sheIgmpProfileEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.13 sheIgmpProviderVersion1RouterTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout." DEFVAL { 400 } ::= { sheIgmpProfileEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.14 sheIgmpProviderVersion1RouterPresentTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until a host will assume that there are no longer any IGMP version 1 routers on the IP subnet attached to this interface. Upon hearing any Version 1 Query, this value is reset to the group membership timer. While this time remaining is non-zero, it may not send any IGMPv2 messages. The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterPresentTimeout." ::= { sheIgmpProfileEntry 14 } sheIgmpProviderVlanMulticastLimitation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Configures all possible multicast addresses for IGMP on a per VLAN basis. This parameter indicates whether this IGMP provider have the limitation on the multicast group/packages or not. Value can be true(1) or false(2). False means all subscriber can join all multicast streams through to this whole VLAN if they are member of this vlan (unlimited access). True is the default state and means only configured groups/packages could be joined (limited access). " DEFVAL { true } ::= { sheIgmpProfileEntry 15 } sheIgmpProviderMcastBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000 | 65535) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This is the configured multicast bandwith limitation per provider. The value 65535 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control - default). New parameter with SHE R2.8. " DEFVAL { 65535 } ::= { sheIgmpProfileEntry 16 } sheIgmpProviderDefaultChannelBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8 " ::= { sheIgmpProfileEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6 sheIgmpProfileControl OBJECT IDENTIFIER ::= { sheIgmp 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.1 sheIgmpProviderControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setIgmpMode: sheIgmpProviderControlMode setIgmpMaxJoinedSubscribers: (Note: Not longer supported starting with release SHE R2.6.) sheIgmpProviderControlMaxJoinedSubscribers setIgmpMaxJoinedGroup: sheIgmpProviderControlMaxJoinedGroup createIgmpProviderEntry: sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation modifyIgmpProviderEntry: sheIgmpProviderControlIndex sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation deleteIgmpProviderEntry: sheIgmpProviderControlIndex New with SHE R2.8: setIgmpProviderChannelAdmission (743): sheIgmpProviderControlIndex sheIgmpProviderControlMcastBandwithLimit sheIgmpProviderControlDefaultChannelBandwith " ::= { sheIgmpProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.2 sheIgmpProviderControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.3 sheIgmpProviderControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.4 sheIgmpProviderControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.5 sheIgmpProviderControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.6 sheIgmpProviderControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "index of sheIgmpProviderTable parameter for - modifyIgmpProviderEntry - deleteIgmpProviderEntry - setIgmpProviderEntrySourceList " ::= { sheIgmpProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.7 sheIgmpProviderControlMode OBJECT-TYPE SYNTAX SheIgmpModeType MAX-ACCESS read-write STATUS current DESCRIPTION "IGMP operation mode can be off proxy parameter for - setIgmpMode That is the general NE igmp on/off switch." ::= { sheIgmpProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.8 sheIgmpProviderControlProfileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name for easy profile handling. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.9 sheIgmpProviderControlProxyIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.10 sheIgmpProviderControlRobustness OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry " ::= { sheIgmpProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.11 sheIgmpProviderControlQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (10..250) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.12 sheIgmpProviderControlQueryResponseInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "1/10 seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.13 sheIgmpProviderControlStartupQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.14 sheIgmpProviderControlStartupQueryCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.15 sheIgmpProviderControlLastMemberQueryInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "1/10 seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.16 sheIgmpProviderControlLastMemberQueryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.17 sheIgmpProviderControlImmediateLeave OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "If immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry Note: Not longer configurable with R2.8." ::= { sheIgmpProfileControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.18 sheIgmpProviderControlUnsolicitedReportInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream). parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry" ::= { sheIgmpProfileControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.19 sheIgmpProviderControlVersion1RouterTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout." ::= { sheIgmpProfileControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.20 sheIgmpProviderControlMaxJoinedSubscriber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The maximum number of joined subscribers in the system. Note: This parameter is not longer supported starting with release SHE R2.6." ::= { sheIgmpProfileControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.21 sheIgmpProviderControlMaxJoinedGroup OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of multicast groups that could be joined in the system." ::= { sheIgmpProfileControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.22 sheIgmpProviderControlVlanMulticastLimitation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true(1),false(2) look at table " ::= { sheIgmpProfileControl 22 } sheIgmpProviderControlMcastBandwithLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000 | 65535) UNITS "100 kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the configured multicast bandwith limitation per provider. The value 655353 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control). New parameter with SHE R2.8. " ::= { sheIgmpProfileControl 23 } sheIgmpProviderControlDefaultChannelBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8" ::= { sheIgmpProfileControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7 sheIgmpProfileVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpProfileVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table assigns a VLANs for multicast traffic to multicast provider profiles. Both a Vlan and a profile can be assigned only once." ::= { sheIgmp 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1 sheIgmpProfileVlanEntry OBJECT-TYPE SYNTAX SheIgmpProfileVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry assigns a VLAN for multicast traffic to a multicast provider profile. Both a Vlan and a profile can be assigned only once." INDEX { sheIgmpProviderIndex } ::= { sheIgmpProfileVlanTable 1 } SheIgmpProfileVlanEntry ::= SEQUENCE { sheIgmpProfileVlanVlanId Integer32, sheIgmpProfileVlanMcastEgressPorts OCTET STRING, sheIgmpProfileVlanInnerVlanId Integer32, sheIgmpProfileVlanDot1pPriority Unsigned32, sheIgmpProfileVlanDot1pReportPriority Unsigned32, sheIgmpProfileVlanDot1pInnerPriority Unsigned32, sheIgmpProfileVlanDot1pInnerReportPriority Unsigned32, sheIgmpProfileVlanForkingMode SheIgmpProfileVlanForkingModeType, sheIgmpProfileVlanOuterVlanId Integer32, sheIgmpProfileVlanVersion SheIgmpVersionType, sheIgmpProfileVlanASMStatus SheIgmpProviderASM, sheIgmpProfileVlanCxUSnoopingState SheIgmpProviderVlanCxuSnoopingState, sheIgmpProfileVlanDefaultSourceIdList OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.2 sheIgmpProfileVlanVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan." ::= { sheIgmpProfileVlanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.3 sheIgmpProfileVlanMcastEgressPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8192)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of all fully configured subscriber ports of this multicast VLAN. The list is updated whenever any part of the chain bridgePort->MCastPackage->IgmpGroup changes. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet." ::= { sheIgmpProfileVlanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.4 sheIgmpProfileVlanInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "An inner vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case." ::= { sheIgmpProfileVlanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.5 sheIgmpProfileVlanDot1pPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers." DEFVAL { 5 } ::= { sheIgmpProfileVlanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.6 sheIgmpProfileVlanDot1pReportPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of an IGMP report that is inserted in vlan tag when a host sends it to router." DEFVAL { 5 } ::= { sheIgmpProfileVlanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.7 sheIgmpProfileVlanDot1pInnerPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode." DEFVAL { 5 } ::= { sheIgmpProfileVlanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.8 sheIgmpProfileVlanDot1pInnerReportPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode." DEFVAL { 5 } ::= { sheIgmpProfileVlanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.9 sheIgmpProfileVlanForkingMode OBJECT-TYPE SYNTAX SheIgmpProfileVlanForkingModeType MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP forking function enabled will send the original IGMP messages with actual MAC address of the clients (e.g. STB) and the corresponding/preserved customer VLAN ID towards the BRAS/Edge Router regardless of IGMP proxy configuration/operation. Possible values: noForking(0), ipoeForking(1), pppoeForking(2)" ::= { sheIgmpProfileVlanEntry 9 } sheIgmpProfileVlanOuterVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "An outer vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case. New with R2.8." ::= { sheIgmpProfileVlanEntry 10 } sheIgmpProfileVlanVersion OBJECT-TYPE SYNTAX SheIgmpVersionType MAX-ACCESS read-only STATUS current DESCRIPTION "Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8" DEFVAL { iGMPv2 } ::= { sheIgmpProfileVlanEntry 11 } sheIgmpProfileVlanASMStatus OBJECT-TYPE SYNTAX SheIgmpProviderASM MAX-ACCESS read-only STATUS current DESCRIPTION "Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. New parameter with SHE R2.8" DEFVAL { enable } ::= { sheIgmpProfileVlanEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.13 sheIgmpProfileVlanCxUSnoopingState OBJECT-TYPE SYNTAX SheIgmpProviderVlanCxuSnoopingState MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. Default value is disable. New parameter with SHE R2.8 " DEFVAL { disable } ::= { sheIgmpProfileVlanEntry 13 } sheIgmpProfileVlanDefaultSourceIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of related group's points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will be outvoted by a similar configuration for the related IgmpGroup. New parameter with SHE R2.8 maintenance." DEFVAL { ''h } ::= { sheIgmpProfileVlanEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8 sheIgmpProfileVlanControl OBJECT IDENTIFIER ::= { sheIgmp 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.1 sheIgmpProfileVlanControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlVlanId - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex modifyIgmpProfileVlanDot1p: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) R2.4 only modifyIgmpProfileVlanForkingMode: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlForkingMode" ::= { sheIgmpProfileVlanControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.2 sheIgmpProfileVlanControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpProfileVlanControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.3 sheIgmpProfileVlanControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpProfileVlanControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.4 sheIgmpProfileVlanControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpProfileVlanControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.5 sheIgmpProfileVlanControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpProfileVlanControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.6 sheIgmpProfileVlanControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1) MAX-ACCESS read-write STATUS current DESCRIPTION "The index sheIgmpProviderIndex of the provider specific multicast profile. parameter for - createIgmpProfileVlanEntry - deleteIgmpProfileVlanEntry" ::= { sheIgmpProfileVlanControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.7 sheIgmpProfileVlanControlVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "The provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan. parameter for - deleteIgmpProfileVlanEntry" ::= { sheIgmpProfileVlanControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.8 sheIgmpProfileVlanControlInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "An inner vlanid for this igmp provider vlan or 0 if not used." ::= { sheIgmpProfileVlanControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.9 sheIgmpProfileVlanControlDot1pPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers." ::= { sheIgmpProfileVlanControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.10 sheIgmpProfileVlanControlDot1pReportPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of an IGMP report that is inserted in vlan tag when a host sends it to router." ::= { sheIgmpProfileVlanControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.11 sheIgmpProfileVlanControlDot1pInnerPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode." ::= { sheIgmpProfileVlanControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.12 sheIgmpProfileVlanControlDot1pInnerReportPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode." ::= { sheIgmpProfileVlanControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.13 sheIgmpProfileVlanControlForkingMode OBJECT-TYPE SYNTAX SheIgmpProfileVlanForkingModeType MAX-ACCESS read-write STATUS current DESCRIPTION "When it's set to 0, it means no forking, when set to 1 it means forking mode is IPoE forking, when set to 2, PPPoE forking is used for the provider" ::= { sheIgmpProfileVlanControl 13 } sheIgmpProfileVlanControlOuterVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "An outer vlanid for this igmp provider vlan or 0 if not used." ::= { sheIgmpProfileVlanControl 14 } sheIgmpProviderControlVersion OBJECT-TYPE SYNTAX SheIgmpVersionType MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8." ::= { sheIgmpProfileVlanControl 15 } sheIgmpProviderControlASMStatus OBJECT-TYPE SYNTAX SheIgmpProviderASM MAX-ACCESS read-write STATUS current DESCRIPTION "Igmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8." ::= { sheIgmpProfileVlanControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.17 sheIgmpProfileVlanControlCxUSnoopingState OBJECT-TYPE SYNTAX SheIgmpProviderVlanCxuSnoopingState MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8." ::= { sheIgmpProfileVlanControl 17 } sheIgmpProfileVlanControlDefaultSourceIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table New parameter with SHE R2.8 maintenance." ::= { sheIgmpProfileVlanControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9 sheIgmpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains entries for multicast groups. A group has a specific multicast address, belongs to a provider and to a multicast group package." ::= { sheIgmp 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1 sheIgmpGroupEntry OBJECT-TYPE SYNTAX SheIgmpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each Igmp-Group. If IGMPv3 is running, each table entry represent a single channel configuration." INDEX { sheIgmpGroupIndex } ::= { sheIgmpGroupTable 1 } SheIgmpGroupEntry ::= SEQUENCE { sheIgmpGroupIndex Unsigned32, sheIgmpGroupIpAddress OCTET STRING, sheIgmpGroupName OCTET STRING, sheIgmpGroupProviderId Unsigned32, sheIgmpGroupMcastGroupPackageList OCTET STRING, sheIgmpGroupJoinedPortsList OCTET STRING, sheIgmpGroupLastMembershipReport TimeTicks, sheIgmpGroupLastLeaveMessage TimeTicks, sheIgmpGroupSuppliedCardList OCTET STRING, sheIgmpGroupIsStatic TruthValue, sheIgmpMcastChannelSourceId Unsigned32, sheIgmpMcastChannelBandwith Unsigned32, sheIgmpMcastChannelDefaultSourceIdList OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.1 sheIgmpGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "A table Index." ::= { sheIgmpGroupEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.2 sheIgmpGroupIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The used Multicast IP-Address. If these Address is set to 00000000, it should work as a * wildcard configuration, it means an any group (S,*) channel. " ::= { sheIgmpGroupEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.3 sheIgmpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name for this multicast group. Spaces and other special characters (: ?) are not allowed!! " ::= { sheIgmpGroupEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.4 sheIgmpGroupProviderId OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "That is the index of the corresponding sheIgmpProviderTable entry." ::= { sheIgmpGroupEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.5 sheIgmpGroupMcastGroupPackageList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. The least significant byte is the second octet." ::= { sheIgmpGroupEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.6 sheIgmpGroupJoinedPortsList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of subscribers currently subscribing this multicast group. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet. A change in this list will not be reported by a trap." ::= { sheIgmpGroupEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.7 sheIgmpGroupLastMembershipReport OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last membership report has been sent upstream by the proxy for this multicast group." ::= { sheIgmpGroupEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.8 sheIgmpGroupLastLeaveMessage OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last leave group message has been sent upstream by the proxy for this multicast group." ::= { sheIgmpGroupEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.9 sheIgmpGroupSuppliedCardList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "List of entPhysIndices currently receiving data of this multicast group. The octet string is a list of pairs of octets each identifying an entPhysIndex for that card. The least significant byte is the second octet. A change in this list will not be reported by a trap." ::= { sheIgmpGroupEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.10 sheIgmpGroupIsStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable static multicast group configuration." DEFVAL { false } ::= { sheIgmpGroupEntry 10 } sheIgmpMcastChannelSourceId OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a index which points to valid entry of the sheIgmpSourceIpAddressTable. If the source IP of the index is 0.0.0.0 (default), it should work as a '*' wildcard configuration and no restriction of possible source ip addresses are made (*,G). In case of IGMP mode iGMPv3 or iGMPv3Compatible ASM will be used. This setting is also valid for mode iGMPv2 usage. The configuration of other source IP's is only valid if iGMPv3 or iGMPv3Compatible mode is running. New parameter with SHE R2.8." ::= { sheIgmpGroupEntry 11 } sheIgmpMcastChannelBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwith of this channel, with a range of 0..500 representing the bandwith with a granularity of 100kBits. New parameter with SHE R2.8." ::= { sheIgmpGroupEntry 12 } sheIgmpMcastChannelDefaultSourceIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of these group points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will outvote a similar configuration for the corresponding IgmpProvider. New parameter with SHE R2.8 maintenance." DEFVAL { ''h } ::= { sheIgmpGroupEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10 sheIgmpGroupControl OBJECT IDENTIFIER ::= { sheIgmp 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.1 sheIgmpGroupControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpGroupEntry: sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlProviderId sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) modifyIgmpGroupEntry: sheIgmpGroupControlIndex sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpGroupEntry: sheIgmpGroupControlIndex New with SHE R2.8: setIgmpMcastChannelParameter: sheIgmpGroupControlIndex sheIgmpMcastChannelControlBandwith " ::= { sheIgmpGroupControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.2 sheIgmpGroupControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpGroupControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.3 sheIgmpGroupControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpGroupControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.4 sheIgmpGroupControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpGroupControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.5 sheIgmpGroupControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpGroupControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.6 sheIgmpGroupControlIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the sheIgmpGroupEntry to be modified. parameter for - modifyIgmpGroupEntry - deleteIgmpGroupEntry" ::= { sheIgmpGroupControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.7 sheIgmpGroupControlIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The used Multicast IP-Address. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry If these Address is set to 00000000, it should work as a * wildcard configuration." ::= { sheIgmpGroupControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.8 sheIgmpGroupControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "A unique name for this multicast group. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry" ::= { sheIgmpGroupControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.9 sheIgmpGroupControlProviderId OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "That is the index of the corresponding sheIgmpProviderTable entry. parameter for - createIgmpGroupEntry " ::= { sheIgmpGroupControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.10 sheIgmpGroupControlMcastGroupPackageList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..65535)) MAX-ACCESS read-write STATUS current DESCRIPTION "That is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry" ::= { sheIgmpGroupControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.11 sheIgmpGroupControlIsStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable static multicast group configuration." ::= { sheIgmpGroupControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.12 sheIgmpMcastChannelControlSourceId OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. New parameter with SHE R2.8." ::= { sheIgmpGroupControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.13 sheIgmpMcastChannelControlBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "100 kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. parameter for: -setIgmpMcastChannelParameter: New parameter with SHE R2.8." ::= { sheIgmpGroupControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.14 sheIgmpMcastChannelControlDefaultSourceIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table New parameter with SHE R2.8 maintenance." ::= { sheIgmpGroupControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11 sheIgmpMcastGroupPackageTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpMcastGroupPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains entry's they combines multicast groups to a multicast group package." ::= { sheIgmp 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1 sheIgmpMcastGroupPackageEntry OBJECT-TYPE SYNTAX SheIgmpMcastGroupPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each multicast group package." INDEX { sheIgmpMcastGroupPackageIndex } ::= { sheIgmpMcastGroupPackageTable 1 } SheIgmpMcastGroupPackageEntry ::= SEQUENCE { sheIgmpMcastGroupPackageIndex Unsigned32, sheIgmpMcastGroupPackageName OCTET STRING, sheIgmpMcastGroupPackageGroupList OCTET STRING } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.1 sheIgmpMcastGroupPackageIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the package-table." ::= { sheIgmpMcastGroupPackageEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.2 sheIgmpMcastGroupPackageName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "That should be a descriptional name. Spaces and other special characters (: ?) are not allowed!! " ::= { sheIgmpMcastGroupPackageEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.3 sheIgmpMcastGroupPackageGroupList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8192)) MAX-ACCESS read-only STATUS current DESCRIPTION "That is a list of pairs of octets each identifying a corresponding index of the sheIgmpGroupTable. It shows the groups that are members of the package. The list is updated by the NE when the package list of a group is modified. The least significant byte is the second octet." ::= { sheIgmpMcastGroupPackageEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12 sheIgmpMcastGroupPackageControl OBJECT IDENTIFIER ::= { sheIgmp 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.1 sheIgmpMcastGroupPackageControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlName deleteIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlIndex" ::= { sheIgmpMcastGroupPackageControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.2 sheIgmpMcastGroupPackageControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpMcastGroupPackageControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.3 sheIgmpMcastGroupPackageControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpMcastGroupPackageControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.4 sheIgmpMcastGroupPackageControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpMcastGroupPackageControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.5 sheIgmpMcastGroupPackageControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpMcastGroupPackageControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.6 sheIgmpMcastGroupPackageControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "A table index." ::= { sheIgmpMcastGroupPackageControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.7 sheIgmpMcastGroupPackageControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "That should be a descriptional name. Spaces and other special characters (: ?) are not allowed!! parameter for - createIgmpMcastGroupPackage" ::= { sheIgmpMcastGroupPackageControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13 sheIgmpPortGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpPortGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast groups a port has currently joined. Because IgmpV3 allow the configuration of wildcard's for used multicast and/or source IP address, R2.8 maintenance modify the second table index to a free running index and add parameter to show the used multicast IP address." ::= { sheIgmp 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1 sheIgmpPortGroupsEntry OBJECT-TYPE SYNTAX SheIgmpPortGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "If IGMPv3 is running, it represent a joined channel!" INDEX { sheBridgePortIndex, sheIgmpPortGroupsIndex } ::= { sheIgmpPortGroupsTable 1 } SheIgmpPortGroupsEntry ::= SEQUENCE { sheIgmpPortGroupsStpIpAddress OCTET STRING, sheIgmpPortGroupsTimeFirstMembRep TimeTicks, sheIgmpPortGroupsTimeLastMembRep TimeTicks, sheIgmpPortGroupsFiltermode SheIgmpPortGroupsFiltermodeType, sheIgmpPortGroupsSourceId OCTET STRING, sheIgmpPortGroupsIpAddress OCTET STRING, sheIgmpPortGroupsIndex Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.1 sheIgmpPortGroupsStpIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the subsribers host (set top box) that has joined the multicast group. Each Ip address is a set of 4 octets. Expanded with R2.8: If Igmpv3 is running up to five boxes could be listed here." ::= { sheIgmpPortGroupsEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.2 sheIgmpPortGroupsTimeFirstMembRep OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The time when the first membership report for the joined multicast group has been received from the subscriber. Note: Set to obsolete with R2.8 - no valid information could be returned!" ::= { sheIgmpPortGroupsEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.3 sheIgmpPortGroupsTimeLastMembRep OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the last membership report for the joined multicast group has been received from the subscriber." ::= { sheIgmpPortGroupsEntry 3 } sheIgmpPortGroupsFiltermode OBJECT-TYPE SYNTAX SheIgmpPortGroupsFiltermodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter may be either INCLUDE or EXCLUDE. In INCLUDE mode, reception of packets sent to the specified multicast address is requested *only* from those IP source address listed in the source-id parameter. In EXCLUDE mode, reception of packets sent to the given multicast address is requested from all IP source addresses *except* those listed in the source-id parameter. New parameter with SHE R2.8 and only valid for IGMPv3." ::= { sheIgmpPortGroupsEntry 4 } sheIgmpPortGroupsSourceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an IP unicast addresses from which multicast reception is desired or not desired, depending on the filter mode. IP address entry consist of 4 Octets and should be a subset or identical to the corresponding sheIgmpMcastChannelSourceId of the joined group. New parameter with SHE R2.8 and only valid for IGMPv3." ::= { sheIgmpPortGroupsEntry 5 } sheIgmpPortGroupsIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The used Multicast IP-Address of the joined group. New parameter with SHE R2.8 maintenance. " ::= { sheIgmpPortGroupsEntry 6 } sheIgmpPortGroupsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The new second tableIndex starting with R2.8 maintenance. It is a free running Index which show the amount of actual joined groups by this subscriber." ::= { sheIgmpPortGroupsEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14 sheIgmpNotifications OBJECT IDENTIFIER ::= { sheIgmp 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.1 sheIgmpModeModified NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpMode } STATUS current DESCRIPTION "The general IGMP operation mode has been modified by the operator." ::= { sheIgmpNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.2 sheIgmpProfileEntryCreated NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpProviderControlIndex, sheIgmpProviderProfileName, sheIgmpProviderProxyIpAddress, sheIgmpProviderRobustness, sheIgmpProviderQueryInterval, sheIgmpProviderQueryResponseInterval, sheIgmpProviderStartupQueryInterval, sheIgmpProviderStartupQueryCount, sheIgmpProviderLastMemberQueryInterval, sheIgmpProviderLastMemberQueryCount, sheIgmpProviderImmediateLeave, sheIgmpProviderUnsolicitedReportInterval, sheIgmpProviderVersion1RouterTimeout, sheIgmpProviderVlanMulticastLimitation } STATUS current DESCRIPTION "A new entry in the sheIgmpProfileTable has been created by the operator." ::= { sheIgmpNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.3 sheIgmpProfileEntryModified NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpProviderControlIndex, sheIgmpProviderProfileName, sheIgmpProviderProxyIpAddress, sheIgmpProviderRobustness, sheIgmpProviderQueryInterval, sheIgmpProviderQueryResponseInterval, sheIgmpProviderStartupQueryInterval, sheIgmpProviderStartupQueryCount, sheIgmpProviderLastMemberQueryInterval, sheIgmpProviderLastMemberQueryCount, sheIgmpProviderImmediateLeave, sheIgmpProviderUnsolicitedReportInterval, sheIgmpProviderVersion1RouterTimeout, sheIgmpProviderVlanMulticastLimitation } STATUS current DESCRIPTION "An entry in the sheIgmpProfileTable has been modified by the operator." ::= { sheIgmpNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.4 sheIgmpProfileEntryDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpProviderControlIndex } STATUS current DESCRIPTION "An entry in the sheIgmpProfileTable has been deleted by the operator." ::= { sheIgmpNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.5 sheIgmpProfileControlResult NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpProviderControlRequest, sheIgmpProviderControlReqResult } STATUS current DESCRIPTION "Notification of port command ending and result in case of long running command." ::= { sheIgmpNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.6 sheIgmpProfileVlanEntryCreated NOTIFICATION-TYPE OBJECTS { sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanControlVlanId, sheIgmpProfileVlanControlIndex, sheIgmpProfileVlanDot1pPriority, sheIgmpProfileVlanDot1pReportPriority, sheIgmpProfileVlanDot1pInnerPriority, sheIgmpProfileVlanDot1pInnerReportPriority, sheIgmpProfileVlanForkingMode, sheIgmpProfileVlanInnerVlanId, sheIgmpProfileVlanOuterVlanId, sheIgmpProfileVlanVersion, sheIgmpProfileVlanASMStatus, sheIgmpProfileVlanCxUSnoopingState, sheIgmpProfileVlanDefaultSourceIdList } STATUS current DESCRIPTION "A new entry in the sheIgmpProfileVlanTable has been created by the operator." ::= { sheIgmpNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.7 sheIgmpProfileVlanEntryModified NOTIFICATION-TYPE OBJECTS { sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanControlVlanId, sheIgmpProfileVlanControlIndex, sheIgmpProfileVlanMcastEgressPorts } STATUS current DESCRIPTION "An entry in the sheIgmpProfileVlanTable has been modified by the NE. The sheIgmpProfileVlanMcastEgressPorts has changed." ::= { sheIgmpNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.8 sheIgmpProfileVlanEntryDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanControlIndex } STATUS current DESCRIPTION "An entry in the sheIgmpProfileVlanTable has been deleted by the operator." ::= { sheIgmpNotifications 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.9 sheIgmpProfileVlanControlResult NOTIFICATION-TYPE OBJECTS { sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanControlRequest, sheIgmpProfileVlanControlReqResult } STATUS current DESCRIPTION "Notification of port command ending and result in case of long running command." ::= { sheIgmpNotifications 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.10 sheIgmpGroupEntryCreated NOTIFICATION-TYPE OBJECTS { sheIgmpGroupControlTimeStamp, sheIgmpGroupControlIndex, sheIgmpGroupIpAddress, sheIgmpGroupName, sheIgmpGroupProviderId, sheIgmpGroupMcastGroupPackageList, sheIgmpGroupIsStatic, sheIgmpMcastChannelSourceId, sheIgmpMcastChannelDefaultSourceIdList } STATUS current DESCRIPTION "A new entry in the sheIgmpGroupTable has been created by the operator." ::= { sheIgmpNotifications 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.11 sheIgmpGroupEntryModified NOTIFICATION-TYPE OBJECTS { sheIgmpGroupControlTimeStamp, sheIgmpGroupControlIndex, sheIgmpGroupIpAddress, sheIgmpGroupName, sheIgmpGroupProviderId, sheIgmpGroupMcastGroupPackageList, sheIgmpGroupIsStatic, sheIgmpMcastChannelSourceId, sheIgmpMcastChannelDefaultSourceIdList } STATUS current DESCRIPTION "An entry in the sheIgmpGroupTable has been modified by the operator." ::= { sheIgmpNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.12 sheIgmpGroupEntryDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpGroupControlTimeStamp, sheIgmpGroupControlIndex } STATUS current DESCRIPTION "An entry in the sheIgmpGroupTable has been deleted by the operator." ::= { sheIgmpNotifications 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.13 sheIgmpGroupControlResult NOTIFICATION-TYPE OBJECTS { sheIgmpGroupControlTimeStamp, sheIgmpGroupControlRequest, sheIgmpGroupControlReqResult } STATUS current DESCRIPTION "Notification of port command ending and result in case of long running command." ::= { sheIgmpNotifications 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.14 sheIgmpMcastGroupPackageEntryCreated NOTIFICATION-TYPE OBJECTS { sheIgmpMcastGroupPackageControlTimeStamp, sheIgmpMcastGroupPackageControlIndex, sheIgmpMcastGroupPackageName } STATUS current DESCRIPTION "An entry in the sheIgmpMcastGroupPackageTable has been created by the operator." ::= { sheIgmpNotifications 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.15 sheIgmpMcastGroupPackageEntryModified NOTIFICATION-TYPE OBJECTS { sheIgmpMcastGroupPackageControlTimeStamp, sheIgmpMcastGroupPackageControlIndex, sheIgmpMcastGroupPackageGroupList } STATUS current DESCRIPTION "An entry in the sheIgmpMcastGroupPackageTable has been modified by the NE. The sheIgmpMcastGroupPackageGroupList has changed." ::= { sheIgmpNotifications 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.16 sheIgmpMcastGroupPackageEntryDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpMcastGroupPackageControlTimeStamp, sheIgmpMcastGroupPackageControlIndex } STATUS current DESCRIPTION "An entry in the sheIgmpMcastGroupPackageTable has been deleted by the operator." ::= { sheIgmpNotifications 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.17 sheIgmpMcastGroupPackageControlResult NOTIFICATION-TYPE OBJECTS { sheIgmpMcastGroupPackageControlTimeStamp, sheIgmpMcastGroupPackageControlRequest, sheIgmpMcastGroupPackageControlReqResult } STATUS current DESCRIPTION "Notification of port command ending and result in case of long running command." ::= { sheIgmpNotifications 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.18 sheIgmpMaxJoinedSubscriberModified NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpMaxJoinedSubscriber } STATUS obsolete DESCRIPTION "The general IGMP MaxJoinedSubscriber-Value has been modified by the operator. Note: This parameter is not longer supported starting with release SHE R2.6." ::= { sheIgmpNotifications 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.19 sheIgmpFloodVlanCreated NOTIFICATION-TYPE OBJECTS { sheIgmpFloodVlanControlTimestamp, sheIgmpFloodVlanControlVlanId } STATUS current DESCRIPTION "An entry in the sheIgmpFloodVlanTable was created by the operator." ::= { sheIgmpNotifications 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.20 sheIgmpFloodVlanDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpFloodVlanControlTimestamp, sheIgmpFloodVlanControlVlanId } STATUS current DESCRIPTION "An entry in the sheIgmpFloodVlanTable was deleted by the operator." ::= { sheIgmpNotifications 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.21 sheIgmpProfileVlanDot1pModified NOTIFICATION-TYPE OBJECTS { sheIgmpProfileVlanControlIndex, sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanDot1pPriority, sheIgmpProfileVlanDot1pReportPriority, sheIgmpProfileVlanDot1pInnerPriority, sheIgmpProfileVlanDot1pInnerReportPriority, sheIgmpProfileVlanForkingMode, sheIgmpProfileVlanInnerVlanId, sheIgmpProfileVlanOuterVlanId, sheIgmpProfileVlanVersion, sheIgmpProfileVlanASMStatus, sheIgmpProfileVlanCxUSnoopingState, sheIgmpProfileVlanDefaultSourceIdList } STATUS current DESCRIPTION "An entry of Dot1p in the sheIgmpProfileVlanTable has been modified by the operator." ::= { sheIgmpNotifications 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.22 sheIgmpMaxJoinedGroupModified NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpMaxJoinedGroup } STATUS current DESCRIPTION "The maximum number of multicast group that a subscriber can join has been modified by the operator." ::= { sheIgmpNotifications 22 } sheIgmpProfileChannelAdmissionModified NOTIFICATION-TYPE OBJECTS { sheIgmpProviderControlTimeStamp, sheIgmpProviderControlIndex, sheIgmpProviderControlMcastBandwithLimit, sheIgmpProviderControlDefaultChannelBandwith } STATUS current DESCRIPTION "IGMP Mcast admission control feature configuration done. New with R2.8." ::= { sheIgmpNotifications 24 } sheIgmpChannelParameterModified NOTIFICATION-TYPE OBJECTS { sheIgmpGroupControlTimeStamp, sheIgmpGroupControlIndex, sheIgmpMcastChannelBandwith } STATUS current DESCRIPTION "IGMPv3 group channel releated parameters modified." ::= { sheIgmpNotifications 25 } sheIgmpSourceIpEntryCreated NOTIFICATION-TYPE OBJECTS { sheIgmpSourceIpControlTimeStamp, sheIgmpSourceIpControlIndex, sheIgmpSourceIpControlAddress } STATUS current DESCRIPTION "Igmpv3 SourceIpAddress entry created." ::= { sheIgmpNotifications 26 } sheIgmpSourceIpEntryDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpSourceIpControlTimeStamp, sheIgmpSourceIpControlIndex, sheIgmpSourceIpControlAddress } STATUS current DESCRIPTION "Igmpv3 SourceIpAddress entry deleted." ::= { sheIgmpNotifications 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.34 sheIgmpTagModeModified NOTIFICATION-TYPE OBJECTS { sheIgmpDoubleTaggingControlTimeStamp, sheIgmpControlVlanTranslationMode, sheIgmpControlVlanDoubleTaggingMode } STATUS current DESCRIPTION "The general IGMP Tag parameterS has been modified by the operator." ::= { sheIgmpNotifications 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16 sheIgmpPerformance OBJECT IDENTIFIER ::= { sheIgmp 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1 sheIgmpPerformanceMonitoring OBJECT IDENTIFIER ::= { sheIgmpPerformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1 sheIgmpPmObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpPmObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds all IGMP PM objects existing in the NE." ::= { sheIgmpPerformanceMonitoring 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1 sheIgmpPmObjectEntry OBJECT-TYPE SYNTAX SheIgmpPmObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry shows the multicast group a PM object is related to." INDEX { sheIgmpPmObjectIndex } ::= { sheIgmpPmObjectTable 1 } SheIgmpPmObjectEntry ::= SEQUENCE { sheIgmpPmObjectIndex Unsigned32, sheIgmpPmObjectGroupIndex Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.1 sheIgmpPmObjectIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique index for IGMP PM objects existing in the NE. One multicast group can have one PM object, including both interval types." ::= { sheIgmpPmObjectEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.2 sheIgmpPmObjectGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is related to." ::= { sheIgmpPmObjectEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2 sheIgmpPmCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpPmCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the entries for Performance Monitoring for multicast groups of the current 15 minute interval and the current day. " ::= { sheIgmpPerformanceMonitoring 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1 sheIgmpPmCurrentEntry OBJECT-TYPE SYNTAX SheIgmpPmCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the current PM data of a multicast group for a certain interval type. Indices are sheIgmpPmObjectIndex and sheIgmpPmCurrentIntervalType." INDEX { sheIgmpPmObjectIndex, sheIgmpPmCurrentIntervalType } ::= { sheIgmpPmCurrentTable 1 } SheIgmpPmCurrentEntry ::= SEQUENCE { sheIgmpPmCurrentIntervalType ShePmIntervalType, sheIgmpPmCurrentAdminState SheAdminStateType, sheIgmpPmCurrentSuspectFlag ShePmSuspectFlagType, sheIgmpPmCurrentHistEntrySize Unsigned32, sheIgmpPmCurrentHistEntriesAvailable Unsigned32, sheIgmpPmCurrentElapsedTime Unsigned32, sheIgmpPmCurrentMembershipReportsFromHost Unsigned32, sheIgmpPmCurrentPeakMembershipReportsFromHost Unsigned32, sheIgmpPmCurrentTimeOfPeakMembershipReports TimeTicks, sheIgmpPmCurrentGroupLeavesFromHost Unsigned32, sheIgmpPmCurrentPeakGroupLeavesFromHost Unsigned32, sheIgmpPmCurrentTimeOfPeakGroupLeaves TimeTicks, sheIgmpPmCurrentMembershipReportsToRouter Unsigned32, sheIgmpPmCurrentGroupLeavesToRouter Unsigned32, sheIgmpPmCurrentPeakMulticastLeaves Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.1 sheIgmpPmCurrentIntervalType OBJECT-TYPE SYNTAX ShePmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to select between the 15 min or the day accumulation types. " ::= { sheIgmpPmCurrentEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.2 sheIgmpPmCurrentAdminState OBJECT-TYPE SYNTAX SheAdminStateType MAX-ACCESS read-write STATUS current DESCRIPTION "This read-write attribute is used to activate (up) and deactivate (down) performance monitoring for the multicast group and interval type." ::= { sheIgmpPmCurrentEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.3 sheIgmpPmCurrentSuspectFlag OBJECT-TYPE SYNTAX ShePmSuspectFlagType MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. " ::= { sheIgmpPmCurrentEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.4 sheIgmpPmCurrentHistEntrySize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired." DEFVAL { 1 } ::= { sheIgmpPmCurrentEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.5 sheIgmpPmCurrentHistEntriesAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and sheIgmpPmCurrentHistEntrySize. Thereby 0 means that this entry is not valid." ::= { sheIgmpPmCurrentEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.6 sheIgmpPmCurrentElapsedTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval)." ::= { sheIgmpPmCurrentEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.7 sheIgmpPmCurrentMembershipReportsFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful join requests for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.8 sheIgmpPmCurrentPeakMembershipReportsFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak of successful join requests per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.9 sheIgmpPmCurrentTimeOfPeakMembershipReports OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.10 sheIgmpPmCurrentGroupLeavesFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP group leave messages for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.11 sheIgmpPmCurrentPeakGroupLeavesFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.12 sheIgmpPmCurrentTimeOfPeakGroupLeaves OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmCurrentEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.13 sheIgmpPmCurrentMembershipReportsToRouter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful join requests for the multicast group sent to the router." ::= { sheIgmpPmCurrentEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.14 sheIgmpPmCurrentGroupLeavesToRouter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP group leave messages for the multicast group sent to the router." ::= { sheIgmpPmCurrentEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.15 sheIgmpPmCurrentPeakMulticastLeaves OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports." ::= { sheIgmpPmCurrentEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3 sheIgmpPmHistoryTableTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpPmHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing all IGMP PM history data. Indices of the table are the PM object, the interval type and the record number." ::= { sheIgmpPerformanceMonitoring 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1 sheIgmpPmHistoryTableEntry OBJECT-TYPE SYNTAX SheIgmpPmHistoryTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing the history PM data of a multicast group for a certain interval type and record number." INDEX { sheIgmpPmObjectIndex, sheIgmpPmHistoryIntervalType, sheIgmpPmHistoryEntryNumber } ::= { sheIgmpPmHistoryTableTable 1 } SheIgmpPmHistoryTableEntry ::= SEQUENCE { sheIgmpPmHistoryIntervalType ShePmIntervalType, sheIgmpPmHistoryEntryNumber Unsigned32, sheIgmpPmHistorySuspectFlag ShePmSuspectFlagType, sheIgmpPmHistoryPeriodEndTime TimeTicks, sheIgmpPmHistoryMembershipReportsFromHost Unsigned32, sheIgmpPmHistoryPeakMembershipReportsFromHost Unsigned32, sheIgmpPmHistoryTimeOfPeakMembershipReports TimeTicks, sheIgmpPmHistoryGroupLeavesFromHost Unsigned32, sheIgmpPmHistoryPeakGroupLeavesFromHost Unsigned32, sheIgmpPmHistoryTimeOfPeakGroupLeaves TimeTicks, sheIgmpPmHistoryMembershipReportsToRouter Unsigned32, sheIgmpPmHistoryGroupLeavesToRouter Unsigned32, sheIgmpPmHistoryPeakMulticastLeaves Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.1 sheIgmpPmHistoryIntervalType OBJECT-TYPE SYNTAX ShePmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is used to select between the 15 min or the day accumulation types. " ::= { sheIgmpPmHistoryTableEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.2 sheIgmpPmHistoryEntryNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is an index used to address the PM history entry. Entry 1 is the most recent. The range of values is between 1 and sheIgmpPmCurrentHistEntrySize." ::= { sheIgmpPmHistoryTableEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.3 sheIgmpPmHistorySuspectFlag OBJECT-TYPE SYNTAX ShePmSuspectFlagType MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. " ::= { sheIgmpPmHistoryTableEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.4 sheIgmpPmHistoryPeriodEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Date/time at the end of the selected interval." ::= { sheIgmpPmHistoryTableEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.5 sheIgmpPmHistoryMembershipReportsFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful join requests for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.6 sheIgmpPmHistoryPeakMembershipReportsFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak of successful join requests per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.7 sheIgmpPmHistoryTimeOfPeakMembershipReports OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of successful join requests per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.8 sheIgmpPmHistoryGroupLeavesFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP group leave messages for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.9 sheIgmpPmHistoryPeakGroupLeavesFromHost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak of IGMP group leave messages per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.10 sheIgmpPmHistoryTimeOfPeakGroupLeaves OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports." ::= { sheIgmpPmHistoryTableEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.11 sheIgmpPmHistoryMembershipReportsToRouter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful join requests for the multicast group sent to the router." ::= { sheIgmpPmHistoryTableEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.12 sheIgmpPmHistoryGroupLeavesToRouter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP group leave messages for the multicast group sent to the router." ::= { sheIgmpPmHistoryTableEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.13 sheIgmpPmHistoryPeakMulticastLeaves OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports." ::= { sheIgmpPmHistoryTableEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2 sheIgmpPerformanceControl OBJECT IDENTIFIER ::= { sheIgmpPerformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.1 sheIgmpPmControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createPmObject sheIgmpPmControlGroupIndex sheIgmpPmControlHistEntrySize modifyPmObject sheIgmpPmControlObjectIndex sheIgmpPmControlIntervalType sheIgmpPmControlHistEntrySize deletePmObject sheIgmpPmControlObjectIndex" ::= { sheIgmpPerformanceControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.2 sheIgmpPmControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpPerformanceControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.3 sheIgmpPmControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpPerformanceControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.4 sheIgmpPmControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpPerformanceControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.5 sheIgmpPmControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpPerformanceControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.6 sheIgmpPmControlObjectIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index sheIgmpPmObjectIndex of the PM object in the sheIgmpPmObjectTable to be modified or deleted. parameter for modifyPmObject deletePmObject" ::= { sheIgmpPerformanceControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.7 sheIgmpPmControlObjectGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Index sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is created for. parameter for createPmObject" ::= { sheIgmpPerformanceControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.8 sheIgmpPmControlIntervalType OBJECT-TYPE SYNTAX ShePmIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to select between the 15 min or the day accumulation types. parameter for modifyPmObject" ::= { sheIgmpPerformanceControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.9 sheIgmpPmControlHistEntrySize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired. In case of PM object creation the number of 15 min entries is set and the number of 24 h entries is always 1. parameter for createPmObject modifyPmObject" ::= { sheIgmpPerformanceControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.10 sheIgmpPmControlRemainingHistoryEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of history entries which are still available for the PM data collection within the NE. The memory for PM data is limited. The manager can read this attribute before/after the execution of PM object commands to inform himself about the remaining history size." ::= { sheIgmpPerformanceControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3 sheIgmpPerformanceNotifications OBJECT IDENTIFIER ::= { sheIgmpPerformance 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.1 sheIgmpPmObjectCreated NOTIFICATION-TYPE OBJECTS { sheIgmpPmControlTimeStamp, sheIgmpPmControlObjectIndex, sheIgmpPmObjectGroupIndex, sheIgmpPmCurrentHistEntrySize } STATUS current DESCRIPTION "IGMP PM object has been created." ::= { sheIgmpPerformanceNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.2 sheIgmpPmObjectModified NOTIFICATION-TYPE OBJECTS { sheIgmpPmControlTimeStamp, sheIgmpPmControlIntervalType, sheIgmpPmControlObjectIndex, sheIgmpPmObjectGroupIndex, sheIgmpPmCurrentHistEntrySize, sheIgmpPmCurrentHistEntriesAvailable } STATUS current DESCRIPTION "IGMP PM object has been modified." ::= { sheIgmpPerformanceNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.3 sheIgmpPmObjectDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpPmControlTimeStamp, sheIgmpPmControlObjectIndex } STATUS current DESCRIPTION "IGMP PM object has been deleted." ::= { sheIgmpPerformanceNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4 sheIgmpPerformanceConformance OBJECT IDENTIFIER ::= { sheIgmpPerformance 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1 sheIgmpPerformanceCompliances OBJECT IDENTIFIER ::= { sheIgmpPerformanceConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1.1 -- this module -- this module sheIgmpPerformanceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheIgmpPmObjectGroup, sheIgmpPmCurrentGroup, sheIgmpPmHistoryGroup, sheIgmpPmControlGroup, sheIgmpPmNotificationGroup } ::= { sheIgmpPerformanceCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2 sheIgmpPerformanceGroups OBJECT IDENTIFIER ::= { sheIgmpPerformanceConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.1 sheIgmpPmObjectGroup OBJECT-GROUP OBJECTS { sheIgmpPmObjectIndex, sheIgmpPmObjectGroupIndex } STATUS current DESCRIPTION "Description." ::= { sheIgmpPerformanceGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.2 sheIgmpPmCurrentGroup OBJECT-GROUP OBJECTS { sheIgmpPmCurrentIntervalType, sheIgmpPmCurrentAdminState, sheIgmpPmCurrentSuspectFlag, sheIgmpPmCurrentHistEntrySize, sheIgmpPmCurrentHistEntriesAvailable, sheIgmpPmCurrentElapsedTime, sheIgmpPmCurrentMembershipReportsFromHost, sheIgmpPmCurrentPeakMembershipReportsFromHost, sheIgmpPmCurrentTimeOfPeakMembershipReports, sheIgmpPmCurrentGroupLeavesFromHost, sheIgmpPmCurrentPeakGroupLeavesFromHost, sheIgmpPmCurrentTimeOfPeakGroupLeaves, sheIgmpPmCurrentMembershipReportsToRouter, sheIgmpPmCurrentGroupLeavesToRouter, sheIgmpPmCurrentPeakMulticastLeaves } STATUS current DESCRIPTION "Description." ::= { sheIgmpPerformanceGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.3 sheIgmpPmHistoryGroup OBJECT-GROUP OBJECTS { sheIgmpPmHistoryIntervalType, sheIgmpPmHistoryEntryNumber, sheIgmpPmHistorySuspectFlag, sheIgmpPmHistoryPeriodEndTime, sheIgmpPmHistoryMembershipReportsFromHost, sheIgmpPmHistoryPeakMembershipReportsFromHost, sheIgmpPmHistoryTimeOfPeakMembershipReports, sheIgmpPmHistoryGroupLeavesFromHost, sheIgmpPmHistoryPeakGroupLeavesFromHost, sheIgmpPmHistoryTimeOfPeakGroupLeaves, sheIgmpPmHistoryMembershipReportsToRouter, sheIgmpPmHistoryGroupLeavesToRouter, sheIgmpPmHistoryPeakMulticastLeaves } STATUS current DESCRIPTION "Description." ::= { sheIgmpPerformanceGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.4 sheIgmpPmControlGroup OBJECT-GROUP OBJECTS { sheIgmpPmControlRequest, sheIgmpPmControlStatus, sheIgmpPmControlTimeStamp, sheIgmpPmControlReqResult, sheIgmpPmControlTimer, sheIgmpPmControlObjectIndex, sheIgmpPmControlObjectGroupIndex, sheIgmpPmControlIntervalType, sheIgmpPmControlHistEntrySize, sheIgmpPmControlRemainingHistoryEntries } STATUS current DESCRIPTION "Description." ::= { sheIgmpPerformanceGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.5 sheIgmpPmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheIgmpPmObjectCreated, sheIgmpPmObjectModified, sheIgmpPmObjectDeleted } STATUS current DESCRIPTION "Description." ::= { sheIgmpPerformanceGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17 sheIgmpStatistics OBJECT IDENTIFIER ::= { sheIgmp 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1 sheIgmpStatsGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpStatsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds IGMP statistics group table in the NE." ::= { sheIgmpStatistics 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1 sheIgmpStatsGroupEntry OBJECT-TYPE SYNTAX SheIgmpStatsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry shows the IGMP group statistics." INDEX { sheIgmpStatsGroupIndex } ::= { sheIgmpStatsGroupTable 1 } SheIgmpStatsGroupEntry ::= SEQUENCE { sheIgmpStatsGroupIndex Unsigned32, sheIgmpStatsGroupTimeSinceLastMembershipReport TimeTicks } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.1 sheIgmpStatsGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of sheIgmpGroupTable" ::= { sheIgmpStatsGroupEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.2 sheIgmpStatsGroupTimeSinceLastMembershipReport OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since last Membership Report was received for acticve dynamic multicast cross-connection." ::= { sheIgmpStatsGroupEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2 sheIgmpStatsBase OBJECT IDENTIFIER ::= { sheIgmpStatistics 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.1 sheIgmpStatsNumberOfGroupsToRouter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of active multicast connections cross-connected by the DSLAM" ::= { sheIgmpStatsBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.2 sheIgmpStatsNumberOfGroupsToHost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of different ip multicast groups currently connected to end users" ::= { sheIgmpStatsBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.3 sheIgmpStatsNumberOfQueryReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp query message received by DSLAM" ::= { sheIgmpStatsBase 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.4 sheIgmpStatsNumberOfReportReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp report message received by DSLAM" ::= { sheIgmpStatsBase 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.5 sheIgmpStatsNumberOfLeaveReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp leave message received by DSLAM" ::= { sheIgmpStatsBase 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.6 sheIgmpStatsNumberOfInvalidReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of invalid message received by DSLAM" ::= { sheIgmpStatsBase 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.7 sheIgmpStatsPeakNumberOfActiveGroupToRouter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active multicast connections cross-connected by the DSLAM per second when the peak" ::= { sheIgmpStatsBase 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.8 sheIgmpStatsTimeOfPeakNumberOfActiveGroupToRouter OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of active multicast connections cross-connected by the DSLAM" ::= { sheIgmpStatsBase 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.9 sheIgmpStatsPeakNumberOfActiveGroupFromHost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of different ip multicast groups currently connected to end users per second when the peak" ::= { sheIgmpStatsBase 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.10 sheIgmpStatsTimeOfPeakNumberOfActiveGroupFromHost OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of different ip multicast groups currently connected to end users" ::= { sheIgmpStatsBase 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.11 sheIgmpStatsNumberOfMsgPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP-messages-rate. The number of IGMP messages received by the DSLAM in one second." ::= { sheIgmpStatsBase 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.12 sheIgmpStatsPeakNumberOfMsgPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate." ::= { sheIgmpStatsBase 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.13 sheIgmpStatsTimeOfPeakNumberOfMsgPerSec OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of IGMP-messages-rate." ::= { sheIgmpStatsBase 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3 sheIgmpStatsBaseControl OBJECT IDENTIFIER ::= { sheIgmpStatistics 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.1 sheIgmpStatsBaseControlRequest OBJECT-TYPE SYNTAX SheIgmpStatsBaseControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Controlrequest for configuration. 741 - clearIgmpStatsBase" ::= { sheIgmpStatsBaseControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.2 sheIgmpStatsBaseControlStatus OBJECT-TYPE SYNTAX SheIgmpStatsBaseControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command " ::= { sheIgmpStatsBaseControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.3 sheIgmpStatsBaseControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)" ::= { sheIgmpStatsBaseControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.4 sheIgmpStatsBaseControlReqResult OBJECT-TYPE SYNTAX SheIgmpStatsBaseControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheIgmpStatsBaseControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4 sheIgmpStatsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpStatsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds IGMP statistics port table in the NE." ::= { sheIgmpStatistics 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1 sheIgmpStatsPortEntry OBJECT-TYPE SYNTAX SheIgmpStatsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry shows the IGMP port statistics." INDEX { sheBridgePortIndex } ::= { sheIgmpStatsPortTable 1 } SheIgmpStatsPortEntry ::= SEQUENCE { sheIgmpStatsPortNumberOfGroups Counter32, sheIgmpStatsPortNumberOfQueryReceived Counter32, sheIgmpStatsPortNumberOfReportReceived Counter32, sheIgmpStatsPortNumberOfLeaveReceived Counter32, sheIgmpStatsPortNumberOfInvalidReceived Counter32, sheIgmpStatsPortPeakNumberOfActiveGroup Gauge32, sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup TimeTicks, sheIgmpStatsPortNumberOfDroppedByCA Gauge32, sheIgmpStatsPortNumberOfDroppedByAC Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.1 sheIgmpStatsPortNumberOfGroups OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of different ip multicast groups currently connected to end user" ::= { sheIgmpStatsPortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.2 sheIgmpStatsPortNumberOfQueryReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp query message received from a subscriber port" ::= { sheIgmpStatsPortEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.3 sheIgmpStatsPortNumberOfReportReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp report message received from a subscriber port" ::= { sheIgmpStatsPortEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.4 sheIgmpStatsPortNumberOfLeaveReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp leave message received from a subscriber port" ::= { sheIgmpStatsPortEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.5 sheIgmpStatsPortNumberOfInvalidReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of invalid message received from a subscriber port" ::= { sheIgmpStatsPortEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.6 sheIgmpStatsPortPeakNumberOfActiveGroup OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active multicast group when the peak" ::= { sheIgmpStatsPortEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.7 sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of active multicast group" ::= { sheIgmpStatsPortEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.8 sheIgmpStatsPortNumberOfDroppedByCA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IGMP msg dropped by conditional access (if CPV failed or if max number of active m/c channels is exceeded). New parameter with SHE R2.8." ::= { sheIgmpStatsPortEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.9 sheIgmpStatsPortNumberOfDroppedByAC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IGMP msg dropped by admission control (if max m/c bandwidth on a bport is exceeded or if max number of non-premium channels is exceeded). New parameter with SHE R2.8." ::= { sheIgmpStatsPortEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5 sheIgmpStatsPortControl OBJECT IDENTIFIER ::= { sheIgmpStatistics 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.1 sheIgmpStatsPortControlRequest OBJECT-TYPE SYNTAX SheIgmpStatsPortControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Controlrequest for configuration. 742 - clearIgmpStatsPort" ::= { sheIgmpStatsPortControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.2 sheIgmpStatsPortControlStatus OBJECT-TYPE SYNTAX SheIgmpStatsPortControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command " ::= { sheIgmpStatsPortControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.3 sheIgmpStatsPortControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)" ::= { sheIgmpStatsPortControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.4 sheIgmpStatsPortControlReqResult OBJECT-TYPE SYNTAX SheIgmpStatsPortControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheIgmpStatsPortControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.5 sheIgmpStatsPortControlBridgePortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Table index (A bridgePort-identifier)" ::= { sheIgmpStatsPortControl 5 } sheIgmpStatsProviderTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpStatsProviderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains entries for statistics of igmp providers of DSLAM" ::= { sheIgmpStatistics 6 } sheIgmpStatsProviderEntry OBJECT-TYPE SYNTAX SheIgmpStatsProviderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry shows the IGMP provider statistics." INDEX { sheIgmpProviderIndex } ::= { sheIgmpStatsProviderTable 1 } SheIgmpStatsProviderEntry ::= SEQUENCE { sheIgmpStatsProviderNumberOfChannelsToRouter Counter32, sheIgmpStatsProviderNumberOfChannelsToHost Counter32, sheIgmpStatsProviderNumberOfQueryReceived Counter32, sheIgmpStatsProviderNumberOfReportReceived Counter32, sheIgmpStatsProviderNumberOfLeaveReceived Counter32, sheIgmpStatsProviderNumberOfInvalidReceived Counter32, sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter Counter32, sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter TimeTicks, sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost Counter32, sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost TimeTicks, sheIgmpStatsProviderNumberOfMsgPerSec Gauge32, sheIgmpStatsProviderPeakNumberOfMsgPerSec Gauge32, sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec TimeTicks } sheIgmpStatsProviderNumberOfChannelsToRouter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of active multicast channels connections cross-connected by a provider" ::= { sheIgmpStatsProviderEntry 1 } sheIgmpStatsProviderNumberOfChannelsToHost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of different ip multicast channels currently connected to end users" ::= { sheIgmpStatsProviderEntry 2 } sheIgmpStatsProviderNumberOfQueryReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp query message received by provider." ::= { sheIgmpStatsProviderEntry 3 } sheIgmpStatsProviderNumberOfReportReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp report message received by provider." ::= { sheIgmpStatsProviderEntry 4 } sheIgmpStatsProviderNumberOfLeaveReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Igmp leave message received by provider." ::= { sheIgmpStatsProviderEntry 5 } sheIgmpStatsProviderNumberOfInvalidReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of invalid message received by provider." ::= { sheIgmpStatsProviderEntry 6 } sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active multicast connections cross-connected by the provider per second when the peak." ::= { sheIgmpStatsProviderEntry 7 } sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of active multicast connections cross-connected by the provider." ::= { sheIgmpStatsProviderEntry 8 } sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of different ip multicast channels currently connected to end users per second when the peak" ::= { sheIgmpStatsProviderEntry 9 } sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of different ip multicast channels currently connected to end users" ::= { sheIgmpStatsProviderEntry 10 } sheIgmpStatsProviderNumberOfMsgPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP-messages-rate. The number of IGMP messages received by the provider in one second." ::= { sheIgmpStatsProviderEntry 11 } sheIgmpStatsProviderPeakNumberOfMsgPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak-IGMP-messages-rate. The maximum value of IGMP-messages-rate." ::= { sheIgmpStatsProviderEntry 12 } sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time and date of the peak of IGMP-messages-rate." ::= { sheIgmpStatsProviderEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.2 sheIgmpStatsProviderControl OBJECT IDENTIFIER ::= { sheIgmpStatistics 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.1 sheIgmpStatsProviderControlRequest OBJECT-TYPE SYNTAX SheIgmpStatsProviderControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Controlrequest for configuration. 743 - clearIgmpStatsProvider: sheIgmpStatsProviderIndex" ::= { sheIgmpStatsProviderControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.2 sheIgmpStatsProviderControlStatus OBJECT-TYPE SYNTAX SheIgmpStatsBaseControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of command " ::= { sheIgmpStatsProviderControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.3 sheIgmpStatsProviderControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)" ::= { sheIgmpStatsProviderControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.4 sheIgmpStatsProviderControlReqResult OBJECT-TYPE SYNTAX SheIgmpStatsBaseControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheIgmpStatsProviderControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.5 sheIgmpStatsProviderControlProviderIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "A provider index." ::= { sheIgmpStatsProviderControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18 sheIgmpFloodVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpFloodVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table has one provider entry. It contains the provider VLAN and the host and querier settings." ::= { sheIgmp 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1 sheIgmpFloodVlanEntry OBJECT-TYPE SYNTAX SheIgmpFloodVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "In first release we will only support one table entry." INDEX { sheIgmpFloodVlanId } ::= { sheIgmpFloodVlanTable 1 } SheIgmpFloodVlanEntry ::= SEQUENCE { sheIgmpFloodVlanId INTEGER } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1.1 sheIgmpFloodVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "A vlanid of which a packet has a destination address as reserved multicast should be flooded without processing. It is for igmp under L2VPN." ::= { sheIgmpFloodVlanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19 sheIgmpFloodVlanControl OBJECT IDENTIFIER ::= { sheIgmp 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.1 sheIgmpFloodVlanControlRequest OBJECT-TYPE SYNTAX SheIgmpFloodVlanControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpFloodVlan(743) sheIgmpFloodVlanControlVlanId deleteIgmpFloodVlan(744) sheIgmpFloodVlanControlVlanId " ::= { sheIgmpFloodVlanControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.2 sheIgmpFloodVlanControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheIgmpFloodVlanControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.3 sheIgmpFloodVlanControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpFloodVlanControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.4 sheIgmpFloodVlanControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheIgmpFloodVlanControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.5 sheIgmpFloodVlanControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpFloodVlanControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.6 sheIgmpFloodVlanControlVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Table index" ::= { sheIgmpFloodVlanControl 6 } sheIgmpSourceIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpSourceIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "New IGMPv3 configuration with SHE R2.8." ::= { sheIgmp 20 } sheIgmpSourceIpAddressEntry OBJECT-TYPE SYNTAX SheIgmpSourceIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an unordered list of zero or more IP unicast addresses from which multicast reception is possible. An implementation MAY impose a limit on the size of source lists, but that limit MUST NOT be less than 64 addresses per list. When an operation causes the source list size limit to be exceeded, the service interface MUST return an error." INDEX { sheIgmpSourceIpIndex } ::= { sheIgmpSourceIpAddressTable 1 } SheIgmpSourceIpAddressEntry ::= SEQUENCE { sheIgmpSourceIpIndex Unsigned32, sheIgmpSourceIpAddress OCTET STRING } sheIgmpSourceIpIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Table Index. A maximum number of 100 different addresses could be configured inside the NE. These index will be configured in sheIgmpGroupSourceList to select the valid source ip address per group (channel). A default configuration with IP 0.0.0.0 is always available and could not be changed or removed. Only valid for IGMPv3 configuration. New parameter with SHE R2.8." ::= { sheIgmpSourceIpAddressEntry 1 } sheIgmpSourceIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is IP unicast addresses from which multicast reception is possible. If the source IP is 0.0.0.0, it should work as a '*' wildcard configuration (per default available). The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8. " ::= { sheIgmpSourceIpAddressEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.21 sheIgmpSourceIpAddressControl OBJECT IDENTIFIER ::= { sheIgmp 21 } sheIgmpSourceIpControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpSourceIpAddressEntry: sheIgmpSourceIpControlAddress deleteIgmpSourceIpAddressEntry: sheIgmpSourceIpControlIndex" ::= { sheIgmpSourceIpAddressControl 1 } sheIgmpSourceIpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpSourceIpAddressControl 2 } sheIgmpSourceIpControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpSourceIpAddressControl 3 } sheIgmpSourceIpControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpSourceIpAddressControl 4 } sheIgmpSourceIpControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpSourceIpAddressControl 5 } sheIgmpSourceIpControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "A table index used for delete an entry." ::= { sheIgmpSourceIpAddressControl 6 } sheIgmpSourceIpControlAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is IP unicast addresses from which multicast reception is possible. The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8." ::= { sheIgmpSourceIpAddressControl 7 } sheIgmpBridgePortConfig OBJECT IDENTIFIER ::= { sheIgmp 22 } sheIgmpBridgePortProviderConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SheIgmpBridgePortProviderConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast provider Vlan a port has currently joined (second table index is sheIgmpProfileVlanVlanId). New supported with SHE R2.8!" ::= { sheIgmpBridgePortConfig 1 } sheIgmpBridgePortProviderConfigEntry OBJECT-TYPE SYNTAX SheIgmpBridgePortProviderConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MCast configuration settiongs per BridgePort." INDEX { sheBridgePortIndex, sheIgmpBridgePortProviderVlanId } ::= { sheIgmpBridgePortProviderConfigTable 1 } SheIgmpBridgePortProviderConfigEntry ::= SEQUENCE { sheIgmpBridgePortProviderVlanId Integer32, sheIgmpBridgePortProviderTranslationVlanId Integer32, sheIgmpBridgePortProviderAllowedVlanIdList OCTET STRING, sheIgmpBridgePortProviderMcastRemainBandwith Unsigned32, sheIgmpBridgePortProviderMcastACStatus SheIgmpProviderACStatus } sheIgmpBridgePortProviderVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderConfigEntry 1 } sheIgmpBridgePortProviderTranslationVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Translation VLAN id for the bridge port. New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderConfigEntry 2 } sheIgmpBridgePortProviderAllowedVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderConfigEntry 3 } sheIgmpBridgePortProviderMcastRemainBandwith OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "100 kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "It is the bridge port remaining multicast bandwidth per provider. New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderConfigEntry 4 } sheIgmpBridgePortProviderMcastACStatus OBJECT-TYPE SYNTAX SheIgmpProviderACStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It indicate the bridge port AC (admission control )status per provider. It can be accept or deny. When it is accepted, it indicates the provider still has enough bandwidth for multicast access. When it is denied, it indicates the provider is short of bandwidth for multicast access. 1 means accept, 0 means deny New parameter with SHE R2.8. " ::= { sheIgmpBridgePortProviderConfigEntry 5 } sheIgmpBridgePortProviderControl OBJECT IDENTIFIER ::= { sheIgmpBridgePortConfig 2 } sheIgmpBridgePortProviderControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createIgmpBridgePortProviderEntry(763): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList modifyIgmpBridgePortProviderEntry(764): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList deleteIgmpBridgePortProviderEntry(765): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId" ::= { sheIgmpBridgePortProviderControl 1 } sheIgmpBridgePortProviderControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the bridgePort to be configured." ::= { sheIgmpBridgePortProviderControl 2 } sheIgmpBridgePortProviderControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheIgmpBridgePortProviderControl 3 } sheIgmpBridgePortProviderControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheIgmpBridgePortProviderControl 4 } sheIgmpBridgePortProviderControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheIgmpBridgePortProviderControl 5 } sheIgmpBridgePortProviderControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheIgmpBridgePortProviderControl 6 } sheIgmpBridgePortProviderControlProviderVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "MCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderControl 7 } sheIgmpBridgePortProviderControlTranslationVlanId OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Translation VLAN id for the bridge port. New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderControl 8 } sheIgmpBridgePortProviderControlAllowedVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8." ::= { sheIgmpBridgePortProviderControl 9 } sheIgmpBridgePortNotifications OBJECT IDENTIFIER ::= { sheIgmpBridgePortConfig 5 } sheIgmpBridgePortProviderParameterCreated NOTIFICATION-TYPE OBJECTS { sheIgmpBridgePortProviderControlIndex, sheIgmpBridgePortProviderControlTimeStamp, sheIgmpBridgePortProviderControlProviderVlanId, sheIgmpBridgePortProviderControlTranslationVlanId, sheIgmpBridgePortProviderControlAllowedVlanIdList } STATUS current DESCRIPTION "send trap when bridgeport R2.8 igmp provider parameter was created." ::= { sheIgmpBridgePortNotifications 1 } sheIgmpBridgePortProviderParameterModified NOTIFICATION-TYPE OBJECTS { sheIgmpBridgePortProviderControlIndex, sheIgmpBridgePortProviderControlTimeStamp, sheIgmpBridgePortProviderControlProviderVlanId, sheIgmpBridgePortProviderControlTranslationVlanId, sheIgmpBridgePortProviderControlAllowedVlanIdList } STATUS current DESCRIPTION "send trap when bridgeport R2.8 igmp provider parameter was modified." ::= { sheIgmpBridgePortNotifications 2 } sheIgmpBridgePortProviderParameterDeleted NOTIFICATION-TYPE OBJECTS { sheIgmpBridgePortProviderControlIndex, sheIgmpBridgePortProviderControlTimeStamp, sheIgmpBridgePortProviderControlProviderVlanId, sheIgmpBridgePortProviderControlTranslationVlanId, sheIgmpBridgePortProviderControlAllowedVlanIdList } STATUS current DESCRIPTION "send trap when bridgeport R2.8 igmp provider parameter was deleted." ::= { sheIgmpBridgePortNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15 sheIgmpConformance OBJECT IDENTIFIER ::= { sheIgmp 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.1 sheIgmpCompliances OBJECT IDENTIFIER ::= { sheIgmpConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.1.1 -- this module -- this module sheIgmpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheIgmpBaseGroup, sheIgmpGroupGroup, sheIgmpGroupControlGroup, sheIgmpMcastGroupPackageGroup, sheIgmpMcastGroupPackageControlGroup, sheIgmpPortGroupsGroup, sheIgmpNotificationGroup, sheIgmpBridgePortGroup, sheIgmpBridgePortControlGroup, sheIgmpBridgePortNotificationGroup, sheIgmpProfileVlanGroup, sheIgmpProfileGroup, sheIgmpProfileControlGroup, sheIgmpProfileVlanControlGroup } ::= { sheIgmpCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2 sheIgmpGroups OBJECT IDENTIFIER ::= { sheIgmpConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.1 sheIgmpBaseGroup OBJECT-GROUP OBJECTS { sheIgmpMode, sheIgmpMaxJoinedGroup, sheIgmpSourceIpIndex, sheIgmpSourceIpAddress, sheIgmpSourceIpControlRequest, sheIgmpSourceIpControlStatus, sheIgmpSourceIpControlTimeStamp, sheIgmpSourceIpControlReqResult, sheIgmpSourceIpControlTimer, sheIgmpSourceIpControlIndex, sheIgmpSourceIpControlAddress, sheIgmpVlanTranslationMode, sheIgmpVlanDoubleTaggingMode, sheIgmpDoubleTaggingControlRequest, sheIgmpDoubleTaggingControlStatus, sheIgmpDoubleTaggingControlTimeStamp, sheIgmpDoubleTaggingControlReqResult, sheIgmpDoubleTaggingControlTimer, sheIgmpControlVlanTranslationMode, sheIgmpControlVlanDoubleTaggingMode } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.2 sheIgmpProfileGroup OBJECT-GROUP OBJECTS { sheIgmpProviderIndex, sheIgmpProviderRobustness, sheIgmpProviderQueryInterval, sheIgmpProviderStartupQueryInterval, sheIgmpProviderLastMemberQueryInterval, sheIgmpProviderLastMemberQueryCount, sheIgmpProviderUnsolicitedReportInterval, sheIgmpProviderQueryResponseInterval, sheIgmpProviderStartupQueryCount, sheIgmpProviderImmediateLeave, sheIgmpProviderProxyIpAddress, sheIgmpProfileVlanVlanId, sheIgmpProfileVlanMcastEgressPorts, sheIgmpProfileVlanInnerVlanId, sheIgmpProviderVlanMulticastLimitation, sheIgmpProviderVersion1RouterPresentTimeout, sheIgmpProviderProfileName, sheIgmpProviderVersion1RouterTimeout, sheIgmpProviderMcastBandwithLimit, sheIgmpProviderDefaultChannelBandwith } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.3 sheIgmpProfileControlGroup OBJECT-GROUP OBJECTS { sheIgmpProviderControlRequest, sheIgmpProviderControlIndex, sheIgmpProviderControlStatus, sheIgmpProviderControlTimer, sheIgmpProviderControlReqResult, sheIgmpProviderControlRobustness, sheIgmpProviderControlStartupQueryInterval, sheIgmpProviderControlLastMemberQueryInterval, sheIgmpProviderControlTimeStamp, sheIgmpProviderControlProfileName, sheIgmpProviderControlQueryInterval, sheIgmpProviderControlQueryResponseInterval, sheIgmpProviderControlImmediateLeave, sheIgmpProviderControlVersion1RouterTimeout, sheIgmpProviderControlStartupQueryCount, sheIgmpProviderControlLastMemberQueryCount, sheIgmpProviderControlProxyIpAddress, sheIgmpProviderControlMaxJoinedGroup, sheIgmpProviderControlASMStatus, sheIgmpProviderControlUnsolicitedReportInterval, sheIgmpProviderControlMode, sheIgmpProviderControlVlanMulticastLimitation, sheIgmpProviderControlVersion, sheIgmpProviderControlMcastBandwithLimit, sheIgmpProviderControlDefaultChannelBandwith } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.4 sheIgmpProfileVlanGroup OBJECT-GROUP OBJECTS { sheIgmpProfileVlanVlanId, sheIgmpProfileVlanMcastEgressPorts, sheIgmpProfileVlanInnerVlanId, sheIgmpProfileVlanDot1pPriority, sheIgmpProfileVlanDot1pReportPriority, sheIgmpProfileVlanDot1pInnerPriority, sheIgmpProfileVlanDot1pInnerReportPriority, sheIgmpProfileVlanForkingMode, sheIgmpProfileVlanOuterVlanId, sheIgmpProfileVlanVersion, sheIgmpProfileVlanASMStatus, sheIgmpProfileVlanCxUSnoopingState, sheIgmpProfileVlanDefaultSourceIdList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.5 sheIgmpProfileVlanControlGroup OBJECT-GROUP OBJECTS { sheIgmpProfileVlanControlRequest, sheIgmpProfileVlanControlStatus, sheIgmpProfileVlanControlTimeStamp, sheIgmpProfileVlanControlReqResult, sheIgmpProfileVlanControlTimer, sheIgmpProfileVlanControlInnerVlanId, sheIgmpProfileVlanControlDot1pPriority, sheIgmpProfileVlanControlDot1pReportPriority, sheIgmpProfileVlanControlDot1pInnerPriority, sheIgmpProfileVlanControlDot1pInnerReportPriority, sheIgmpProfileVlanControlVlanId, sheIgmpProfileVlanControlIndex, sheIgmpProfileVlanControlForkingMode, sheIgmpProfileVlanControlOuterVlanId, sheIgmpProviderControlASMStatus, sheIgmpProviderControlVersion, sheIgmpProfileVlanControlCxUSnoopingState, sheIgmpProfileVlanControlDefaultSourceIdList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.6 sheIgmpGroupGroup OBJECT-GROUP OBJECTS { sheIgmpGroupIndex, sheIgmpGroupIpAddress, sheIgmpGroupJoinedPortsList, sheIgmpGroupLastMembershipReport, sheIgmpGroupLastLeaveMessage, sheIgmpGroupSuppliedCardList, sheIgmpGroupProviderId, sheIgmpGroupName, sheIgmpGroupMcastGroupPackageList, sheIgmpGroupIsStatic, sheIgmpMcastChannelSourceId, sheIgmpMcastChannelBandwith, sheIgmpMcastChannelDefaultSourceIdList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.7 sheIgmpGroupControlGroup OBJECT-GROUP OBJECTS { sheIgmpGroupControlRequest, sheIgmpGroupControlIndex, sheIgmpGroupControlStatus, sheIgmpGroupControlTimer, sheIgmpGroupControlReqResult, sheIgmpGroupControlIpAddress, sheIgmpGroupControlProviderId, sheIgmpGroupControlTimeStamp, sheIgmpGroupControlName, sheIgmpGroupControlMcastGroupPackageList, sheIgmpGroupControlIsStatic, sheIgmpMcastChannelControlSourceId, sheIgmpMcastChannelControlBandwith, sheIgmpMcastChannelControlDefaultSourceIdList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.8 sheIgmpMcastGroupPackageGroup OBJECT-GROUP OBJECTS { sheIgmpMcastGroupPackageIndex, sheIgmpMcastGroupPackageName, sheIgmpMcastGroupPackageGroupList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.9 sheIgmpMcastGroupPackageControlGroup OBJECT-GROUP OBJECTS { sheIgmpMcastGroupPackageControlRequest, sheIgmpMcastGroupPackageControlIndex, sheIgmpMcastGroupPackageControlStatus, sheIgmpMcastGroupPackageControlTimer, sheIgmpMcastGroupPackageControlReqResult, sheIgmpMcastGroupPackageControlTimeStamp, sheIgmpMcastGroupPackageControlName } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.10 sheIgmpPortGroupsGroup OBJECT-GROUP OBJECTS { sheIgmpPortGroupsStpIpAddress, sheIgmpPortGroupsTimeLastMembRep, sheIgmpPortGroupsFiltermode, sheIgmpPortGroupsSourceId, sheIgmpPortGroupsIpAddress, sheIgmpPortGroupsIndex } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.11 sheIgmpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheIgmpGroupEntryCreated, sheIgmpGroupEntryModified, sheIgmpGroupEntryDeleted, sheIgmpMcastGroupPackageEntryCreated, sheIgmpProfileControlResult, sheIgmpProfileVlanControlResult, sheIgmpGroupControlResult, sheIgmpMcastGroupPackageControlResult, sheIgmpMcastGroupPackageEntryModified, sheIgmpProfileVlanEntryModified, sheIgmpMcastGroupPackageEntryDeleted, sheIgmpModeModified, sheIgmpProfileVlanDot1pModified, sheIgmpSourceIpEntryCreated, sheIgmpSourceIpEntryDeleted, sheIgmpMaxJoinedGroupModified, sheIgmpProfileEntryCreated, sheIgmpProfileEntryModified, sheIgmpProfileEntryDeleted, sheIgmpProfileVlanEntryCreated, sheIgmpProfileVlanEntryDeleted, sheIgmpFloodVlanCreated, sheIgmpFloodVlanDeleted, sheIgmpChannelParameterModified, sheIgmpProfileChannelAdmissionModified, sheIgmpTagModeModified } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.12 sheIgmpStatisticsGroup OBJECT-GROUP OBJECTS { sheIgmpStatsGroupIndex, sheIgmpStatsGroupTimeSinceLastMembershipReport, sheIgmpStatsNumberOfGroupsToRouter, sheIgmpStatsNumberOfGroupsToHost, sheIgmpStatsNumberOfQueryReceived, sheIgmpStatsNumberOfReportReceived, sheIgmpStatsNumberOfLeaveReceived, sheIgmpStatsNumberOfInvalidReceived, sheIgmpStatsPeakNumberOfActiveGroupToRouter, sheIgmpStatsTimeOfPeakNumberOfActiveGroupToRouter, sheIgmpStatsPeakNumberOfActiveGroupFromHost, sheIgmpStatsTimeOfPeakNumberOfActiveGroupFromHost, sheIgmpStatsNumberOfMsgPerSec, sheIgmpStatsPeakNumberOfMsgPerSec, sheIgmpStatsTimeOfPeakNumberOfMsgPerSec, sheIgmpStatsBaseControlRequest, sheIgmpStatsBaseControlStatus, sheIgmpStatsBaseControlTimestamp, sheIgmpStatsBaseControlReqResult, sheIgmpStatsPortNumberOfGroups, sheIgmpStatsPortNumberOfQueryReceived, sheIgmpStatsPortNumberOfReportReceived, sheIgmpStatsPortNumberOfLeaveReceived, sheIgmpStatsPortNumberOfInvalidReceived, sheIgmpStatsPortPeakNumberOfActiveGroup, sheIgmpStatsPortTimeOfPeakNumberOfActiveGroup, sheIgmpStatsPortNumberOfDroppedByCA, sheIgmpStatsPortNumberOfDroppedByAC, sheIgmpStatsPortControlRequest, sheIgmpStatsPortControlStatus, sheIgmpStatsPortControlTimestamp, sheIgmpStatsPortControlReqResult, sheIgmpStatsPortControlBridgePortIndex, sheIgmpFloodVlanId, sheIgmpFloodVlanControlRequest, sheIgmpFloodVlanControlStatus, sheIgmpFloodVlanControlTimestamp, sheIgmpFloodVlanControlTimer, sheIgmpFloodVlanControlReqResult, sheIgmpFloodVlanControlVlanId, sheIgmpStatsProviderNumberOfChannelsToRouter, sheIgmpStatsProviderNumberOfChannelsToHost, sheIgmpStatsProviderNumberOfQueryReceived, sheIgmpStatsProviderNumberOfReportReceived, sheIgmpStatsProviderNumberOfLeaveReceived, sheIgmpStatsProviderNumberOfInvalidReceived, sheIgmpStatsProviderPeakNumberOfActiveChannelToRouter, sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouter, sheIgmpStatsProviderPeakNumberOfActiveChannelFromHost, sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHost, sheIgmpStatsProviderNumberOfMsgPerSec, sheIgmpStatsProviderPeakNumberOfMsgPerSec, sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSec, sheIgmpStatsProviderControlRequest, sheIgmpStatsProviderControlStatus, sheIgmpStatsProviderControlTimestamp, sheIgmpStatsProviderControlReqResult, sheIgmpStatsProviderControlProviderIndex } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.13 sheIgmpFloodVlanTableGroup OBJECT-GROUP OBJECTS { sheIgmpFloodVlanId } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.7.15.2.14 sheIgmpFloodVlanControlGroup OBJECT-GROUP OBJECTS { sheIgmpFloodVlanControlRequest, sheIgmpFloodVlanControlStatus, sheIgmpFloodVlanControlTimestamp, sheIgmpFloodVlanControlTimer, sheIgmpFloodVlanControlReqResult, sheIgmpFloodVlanControlVlanId } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 14 } sheIgmpObsoleteGroup OBJECT-GROUP OBJECTS { sheIgmpMaxJoinedSubscriber, sheIgmpProviderControlMaxJoinedSubscriber, sheIgmpVersion, sheIgmpPortGroupsTimeFirstMembRep } STATUS obsolete DESCRIPTION "Description." ::= { sheIgmpGroups 15 } sheIgmpObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheIgmpMaxJoinedSubscriberModified } STATUS obsolete DESCRIPTION "Description." ::= { sheIgmpGroups 16 } sheIgmpBridgePortGroup OBJECT-GROUP OBJECTS { sheIgmpBridgePortProviderVlanId, sheIgmpBridgePortProviderTranslationVlanId, sheIgmpBridgePortProviderAllowedVlanIdList, sheIgmpBridgePortProviderMcastRemainBandwith, sheIgmpBridgePortProviderMcastACStatus } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 17 } sheIgmpBridgePortControlGroup OBJECT-GROUP OBJECTS { sheIgmpBridgePortProviderControlRequest, sheIgmpBridgePortProviderControlIndex, sheIgmpBridgePortProviderControlStatus, sheIgmpBridgePortProviderControlTimer, sheIgmpBridgePortProviderControlReqResult, sheIgmpBridgePortProviderControlTimeStamp, sheIgmpBridgePortProviderControlProviderVlanId, sheIgmpBridgePortProviderControlTranslationVlanId, sheIgmpBridgePortProviderControlAllowedVlanIdList } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 18 } sheIgmpBridgePortNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheIgmpBridgePortProviderParameterCreated, sheIgmpBridgePortProviderParameterModified, sheIgmpBridgePortProviderParameterDeleted } STATUS current DESCRIPTION "Description." ::= { sheIgmpGroups 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8 sheQueueConfiguration OBJECT IDENTIFIER ::= { sheBridgeMib 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1 sheQueuePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SheQueuePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the .1p prioritys of each queue for upstream and downstream direction." ::= { sheQueueConfiguration 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1 sheQueuePriorityEntry OBJECT-TYPE SYNTAX SheQueuePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each priority." INDEX { sheQueuePriority } ::= { sheQueuePriorityTable 1 } SheQueuePriorityEntry ::= SEQUENCE { sheQueuePriority Integer32, sheQueueNumber Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.1 sheQueuePriority OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1." ::= { sheQueuePriorityEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.2 sheQueueNumber OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "That represents the Queue-Number. Only applicable for ingress queues on iu, because cxu_b will always use only one queue for traffic." ::= { sheQueuePriorityEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2 sheReducedQueuePriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SheReducedQueuePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There could a shrinking of queues on the iu in downstream direction (depending on the used IU type). So the available .1p-prioritys has to be mapped on a set of only four available queue-numbers." ::= { sheQueueConfiguration 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1 sheReducedQueuePriorityEntry OBJECT-TYPE SYNTAX SheReducedQueuePriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each priority." INDEX { sheReducedQueuePriority } ::= { sheReducedQueuePriorityTable 1 } SheReducedQueuePriorityEntry ::= SEQUENCE { sheReducedQueuePriority Integer32, sheReducedQueueNumber Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.1 sheReducedQueuePriority OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1." ::= { sheReducedQueuePriorityEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.2 sheReducedQueueNumber OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of the outgoing queue, where this priority is mapped on." ::= { sheReducedQueuePriorityEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3 sheQueueControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.1 sheQueueControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber modifyReducedQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber " ::= { sheQueueControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.2 sheQueueControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The table-index to be modified." ::= { sheQueueControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.3 sheQueueControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheQueueControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.4 sheQueueControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheQueueControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.5 sheQueueControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheQueueControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.6 sheQueueControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheQueueControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.7 sheQueueControlQueueNumber OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The range for this value depends on the used ControlRequest. In case of the Controlrequest is modifyReducedQueuePriorityMapping, the range is only 1..4! " ::= { sheQueueControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4 sheQueueModeTable OBJECT-TYPE SYNTAX SEQUENCE OF SheQueueModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure queue mode depending on the interfacetype." ::= { sheQueueConfiguration 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1 sheQueueModeEntry OBJECT-TYPE SYNTAX SheQueueModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each interface type." INDEX { sheQueueModeInterfaceTypeIndex } ::= { sheQueueModeTable 1 } SheQueueModeEntry ::= SEQUENCE { sheQueueModeInterfaceTypeIndex SheBridgeInterfaceType, sheQueueConfigurationMode SheQueueModeType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.1 sheQueueModeInterfaceTypeIndex OBJECT-TYPE SYNTAX SheBridgeInterfaceType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the interface type, were this queue configuration should be used. uplink downlink cascading subcascading " ::= { sheQueueModeEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.2 sheQueueConfigurationMode OBJECT-TYPE SYNTAX SheQueueModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the queue mode, for this interface type. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's." DEFVAL { strict } ::= { sheQueueModeEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5 sheQueueModeControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.1 sheQueueModeControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyQueueModeEntry: sheQueueModeControlIndex sheQueueModeControlMode" ::= { sheQueueModeControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.2 sheQueueModeControlIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The table index to be modified." ::= { sheQueueModeControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.3 sheQueueModeControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheQueueModeControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.4 sheQueueModeControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheQueueModeControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.5 sheQueueModeControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheQueueModeControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.6 sheQueueModeControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheQueueModeControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.7 sheQueueModeControlMode OBJECT-TYPE SYNTAX SheQueueModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Set the queue mode." ::= { sheQueueModeControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6 sheQueueWeightTable OBJECT-TYPE SYNTAX SEQUENCE OF SheQueueWeightEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure weight's of queues for upstream direction." ::= { sheQueueConfiguration 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1 sheQueueWeightEntry OBJECT-TYPE SYNTAX SheQueueWeightEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each queue." INDEX { sheQueueIndex } ::= { sheQueueWeightTable 1 } SheQueueWeightEntry ::= SEQUENCE { sheQueueIndex Unsigned32, sheQueueWeight Unsigned32, sheQueueWeightWatermarkLow Integer32, sheQueueWeightWatermarkHigh Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.1 sheQueueIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "A table index. This index represents the Queue-Number." ::= { sheQueueWeightEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.2 sheQueueWeight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheQueueWeightEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.3 sheQueueWeightWatermarkLow OBJECT-TYPE SYNTAX Integer32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A low watermark value for a NE internal color aware queue handling. This value represents a % - Value of usage of the total Queue-Size. Default values: ------------------- Queue | Low | ------------------- 1 | 20 % | 2 | 20 % | 3 | 20 % | 4 | 20 % | 5 | 30 % | 6 | 30 % | 7 | 15 % | 8 | 15 % |" ::= { sheQueueWeightEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.4 sheQueueWeightWatermarkHigh OBJECT-TYPE SYNTAX Integer32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A high watermark value for a NE internal color aware queue handling. High watermark defines additional the total used queue size as %-value of the theoretical possible queue size. Default Values: ------------ Queue | High ------------ 1 | 30 % 2 | 30 % 3 | 30 % 4 | 30 % 5 | 40 % 6 | 40 % 7 | 20 % 8 | 20 %" ::= { sheQueueWeightEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7 sheQueueWeightControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.1 sheQueueWeightControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyQueueWeightEntry: sheQueueWeightControlIndex sheQueueWeightControlWeight sheQueueWeightControlWatermarkLow sheQueueWeightControlWatermarkHigh " ::= { sheQueueWeightControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.2 sheQueueWeightControlIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The table-entry to be modified." ::= { sheQueueWeightControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.3 sheQueueWeightControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheQueueWeightControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.4 sheQueueWeightControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheQueueWeightControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.5 sheQueueWeightControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheQueueWeightControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.6 sheQueueWeightControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheQueueWeightControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.7 sheQueueWeightControlWeight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at weight-table description." ::= { sheQueueWeightControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.8 sheQueueWeightControlWatermarkLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Not needed for configuration in current scenario. This value represents a % - Value of usage of the total Queue-Size. " ::= { sheQueueWeightControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.9 sheQueueWeightControlWatermarkHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Not needed for configuration in current scenario.This value represents a % - Value of usage of the total Queue-Size. " ::= { sheQueueWeightControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9 sheQueueNotifications OBJECT IDENTIFIER ::= { sheQueueConfiguration 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.1 sheQueuePriorityMappingModified NOTIFICATION-TYPE OBJECTS { sheQueueControlIndex, sheQueueControlTimeStamp, sheQueueControlQueueNumber } STATUS current DESCRIPTION "Configuration notification for priority mapping table." ::= { sheQueueNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.2 sheReducedQueuePriorityMappingModified NOTIFICATION-TYPE OBJECTS { sheQueueControlIndex, sheQueueControlTimeStamp, sheQueueControlQueueNumber } STATUS current DESCRIPTION "Configuration notification for shrink mapping table." ::= { sheQueueNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.3 sheQueueModeEntryModified NOTIFICATION-TYPE OBJECTS { sheQueueModeControlIndex, sheQueueModeControlTimeStamp, sheQueueModeControlMode } STATUS current DESCRIPTION "Configuration notification for queue mode table." ::= { sheQueueNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.4 sheQueueWeightEntryModified NOTIFICATION-TYPE OBJECTS { sheQueueWeightControlIndex, sheQueueWeightControlTimeStamp, sheQueueWeightControlWeight, sheQueueWeightControlWatermarkLow, sheQueueWeightControlWatermarkHigh } STATUS current DESCRIPTION "Configuration notification for queue weight table." ::= { sheQueueNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.5 sheCardQueueEntryConfigured NOTIFICATION-TYPE OBJECTS { sheCardQueueControlIndex, sheCardQueueControlTimeStamp, sheCardQueueControlInterfaceTypeIndex, sheCardQueueControlSchedulingMode, sheCardQueueControlQueue1Weight, sheCardQueueControlQueue1Watermarks, sheCardQueueControlQueue2Weight, sheCardQueueControlQueue2Watermarks, sheCardQueueControlQueue3Weight, sheCardQueueControlQueue3Watermarks, sheCardQueueControlQueue4Weight, sheCardQueueControlQueue4Watermarks, sheCardQueueControlQueue5Weight, sheCardQueueControlQueue5Watermarks, sheCardQueueControlQueue6Weight, sheCardQueueControlQueue6Watermarks, sheCardQueueControlQueue7Weight, sheCardQueueControlQueue7Watermarks, sheCardQueueControlQueue8Weight, sheCardQueueControlQueue8Watermarks, sheCardQueueControlColourAwareTCSource, sheCardQueueControlColourMarking, sheCardQueueControlDiscardPolicy, sheCardQueueControlMode, sheCardQueueControlHqsSecondStageInputQueue, sheCardQueueControlHqsFirstStagePir, sheCardQueueControlHqsFirstStagePbs } STATUS current DESCRIPTION "Configure the queue handling for a card." ::= { sheQueueNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.6 sheCardQueueEntryDeleted NOTIFICATION-TYPE OBJECTS { sheCardQueueControlIndex, sheCardQueueControlTimeStamp, sheCardQueueControlInterfaceTypeIndex } STATUS current DESCRIPTION "Delete the queue handling for a card." ::= { sheQueueNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.5 sheCardQueueEntryConfigResult NOTIFICATION-TYPE OBJECTS { sheCardQueueControlIndex, sheCardQueueControlTimeStamp, sheCardQueueControlInterfaceTypeIndex, sheCardQueueControlStatus, sheCardQueueControlReqResult } STATUS current DESCRIPTION "Result trap for long running command to configure the queue handling for a card." ::= { sheQueueNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10 sheCardQueueConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCardQueueConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the queue handling individuell per configured card. This will replace the general queue configuration settings. Per default, no indivudell settings are made and this table is empty (could be change during development). NEW supported with R2.8!" ::= { sheQueueConfiguration 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1 sheCardQueueConfigurationEntry OBJECT-TYPE SYNTAX SheCardQueueConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each card, if these card should not use the global NE queue configuration parameters. If a card type will never uses the global NE parameters, a entry for this card will be automatically created during card creation process. This table uses two indices: First index is the entPhysicalIndex from entPhysicalTable for the card. Second index is sheCardQueueInterfaceTypeIndex from this table." INDEX { entPhysicalIndex, sheCardQueueInterfaceTypeIndex } ::= { sheCardQueueConfigurationTable 1 } SheCardQueueConfigurationEntry ::= SEQUENCE { sheCardQueueInterfaceTypeIndex SheBridgeInterfaceType, sheCardQueueSchedulingMode SheQueueModeType, sheCardQueue1Weight Unsigned32, sheCardQueue1Watermarks Unsigned32, sheCardQueue2Weight Unsigned32, sheCardQueue2Watermarks Unsigned32, sheCardQueue3Weight Unsigned32, sheCardQueue3Watermarks Unsigned32, sheCardQueue4Weight Unsigned32, sheCardQueue4Watermarks Unsigned32, sheCardQueue5Weight Unsigned32, sheCardQueue5Watermarks Unsigned32, sheCardQueue6Weight Unsigned32, sheCardQueue6Watermarks Unsigned32, sheCardQueue7Weight Unsigned32, sheCardQueue7Watermarks Unsigned32, sheCardQueue8Weight Unsigned32, sheCardQueue8Watermarks Unsigned32, sheCardQueueColourAwareTCSource SheQueueColourAwareType, sheCardQueueColourMarking SheQueueColourAwareType, sheCardQueueDiscardPolicy SheQueueDiscardPolicyType, sheCardQueueMode SheCardQueueModeType, sheCardQueueHqsSecondStageInputQueue Unsigned32, sheCardQueueHqsFirstStagePir Unsigned32, sheCardQueueHqsFirstStagePbs Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.1 sheCardQueueInterfaceTypeIndex OBJECT-TYPE SYNTAX SheBridgeInterfaceType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the interface type, were this queue configuration should be used. Valid values for this configuration's are: uplink(1) -> for central board means uplink, for IU means interlink to cxu downlink(2) -> for central board means interlink to IU's, for IU means subcriber " ::= { sheCardQueueConfigurationEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.10 sheCardQueueSchedulingMode OBJECT-TYPE SYNTAX SheQueueModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the queue scheduling mode. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's." DEFVAL { strict } ::= { sheCardQueueConfigurationEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.11 sheCardQueue1Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 1 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.12 sheCardQueue1Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 1. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '001E0014'h } ::= { sheCardQueueConfigurationEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.13 sheCardQueue2Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 2 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.14 sheCardQueue2Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 2. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '001E0014'h } ::= { sheCardQueueConfigurationEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.15 sheCardQueue3Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 3 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.16 sheCardQueue3Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 3. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '001E0014'h } ::= { sheCardQueueConfigurationEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.17 sheCardQueue4Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 4 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.18 sheCardQueue4Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 4. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '001E0014'h } ::= { sheCardQueueConfigurationEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.19 sheCardQueue5Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 5 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.20 sheCardQueue5Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 5. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size. " DEFVAL { '0028001E'h } ::= { sheCardQueueConfigurationEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.21 sheCardQueue6Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 6 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.22 sheCardQueue6Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 6. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '0028001E'h } ::= { sheCardQueueConfigurationEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.23 sheCardQueue7Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 7 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.24 sheCardQueue7Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 7. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '0014000F'h } ::= { sheCardQueueConfigurationEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.25 sheCardQueue8Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A weight value for queue 8 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again." DEFVAL { 100 } ::= { sheCardQueueConfigurationEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.26 sheCardQueue8Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "A watermark configuration for a NE internal colour aware queue handling for queue number 8. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size." DEFVAL { '0014000F'h } ::= { sheCardQueueConfigurationEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.27 sheCardQueueColourAwareTCSource OBJECT-TYPE SYNTAX SheQueueColourAwareType MAX-ACCESS read-only STATUS current DESCRIPTION "Configure, how the current traffic class of a frame should detected. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for R3.5!" DEFVAL { none } ::= { sheCardQueueConfigurationEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.28 sheCardQueueColourMarking OBJECT-TYPE SYNTAX SheQueueColourAwareType MAX-ACCESS read-only STATUS current DESCRIPTION "Configure, if and how the current colour should be marked. Colour marking will only work in upstream direction. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for 3.5!" DEFVAL { none } ::= { sheCardQueueConfigurationEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.29 sheCardQueueDiscardPolicy OBJECT-TYPE SYNTAX SheQueueDiscardPolicyType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the policy in case of frame discards. Possible values: tailDrop(1), wRed(2) Configuration will be currently ignored! Starting support planed for R3.5!" DEFVAL { tailDrop } ::= { sheCardQueueConfigurationEntry 29 } sheCardQueueMode OBJECT-TYPE SYNTAX SheCardQueueModeType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter describe the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8. " DEFVAL { mode4QueueFlat } ::= { sheCardQueueConfigurationEntry 30 } sheCardQueueHqsSecondStageInputQueue OBJECT-TYPE SYNTAX Unsigned32 (5..8) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 5-8) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8." DEFVAL { 5 } ::= { sheCardQueueConfigurationEntry 31 } sheCardQueueHqsFirstStagePir OBJECT-TYPE SYNTAX Unsigned32 (0..32760) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8." ::= { sheCardQueueConfigurationEntry 32 } sheCardQueueHqsFirstStagePbs OBJECT-TYPE SYNTAX Unsigned32 (0..16000) UNITS "Byte" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8." ::= { sheCardQueueConfigurationEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11 sheCardQueueConfigurationControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.1 sheCardQueueControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "configureCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex ... deleteCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex " ::= { sheCardQueueConfigurationControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2 sheCardQueueControlIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The first index (entPhysicalIndex of card) to identify the table-entry to be configured." ::= { sheCardQueueConfigurationControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.3 sheCardQueueControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheCardQueueConfigurationControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.4 sheCardQueueControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheCardQueueConfigurationControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.5 sheCardQueueControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheCardQueueConfigurationControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.6 sheCardQueueControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheCardQueueConfigurationControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.7 sheCardQueueControlInterfaceTypeIndex OBJECT-TYPE SYNTAX SheBridgeInterfaceType MAX-ACCESS read-write STATUS current DESCRIPTION "The second index to identify the table-entry to be configured." ::= { sheCardQueueConfigurationControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.16 sheCardQueueControlSchedulingMode OBJECT-TYPE SYNTAX SheQueueModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Set the queue scheduling mode." ::= { sheCardQueueConfigurationControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.17 sheCardQueueControlQueue1Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.18 sheCardQueueControlQueue1Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.19 sheCardQueueControlQueue2Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.20 sheCardQueueControlQueue2Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.21 sheCardQueueControlQueue3Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.22 sheCardQueueControlQueue3Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.23 sheCardQueueControlQueue4Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.24 sheCardQueueControlQueue4Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.25 sheCardQueueControlQueue5Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.26 sheCardQueueControlQueue5Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.27 sheCardQueueControlQueue6Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.28 sheCardQueueControlQueue6Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.29 sheCardQueueControlQueue7Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.30 sheCardQueueControlQueue7Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.31 sheCardQueueControlQueue8Weight OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.32 sheCardQueueControlQueue8Watermarks OBJECT-TYPE SYNTAX Unsigned32 UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.33 sheCardQueueControlColourAwareTCSource OBJECT-TYPE SYNTAX SheQueueColourAwareType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.34 sheCardQueueControlColourMarking OBJECT-TYPE SYNTAX SheQueueColourAwareType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.35 sheCardQueueControlDiscardPolicy OBJECT-TYPE SYNTAX SheQueueDiscardPolicyType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table description." ::= { sheCardQueueConfigurationControl 35 } sheCardQueueControlMode OBJECT-TYPE SYNTAX SheCardQueueModeType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter set the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8." ::= { sheCardQueueConfigurationControl 36 } sheCardQueueControlHqsSecondStageInputQueue OBJECT-TYPE SYNTAX Unsigned32 (5..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 1-4) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8." ::= { sheCardQueueConfigurationControl 37 } sheCardQueueControlHqsFirstStagePir OBJECT-TYPE SYNTAX Unsigned32 (0..32760) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8." ::= { sheCardQueueConfigurationControl 38 } sheCardQueueControlHqsFirstStagePbs OBJECT-TYPE SYNTAX Unsigned32 (0..16000) UNITS "Byte" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8." ::= { sheCardQueueConfigurationControl 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12 sheShapingProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheShapingProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The shaping profile table." ::= { sheQueueConfiguration 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1 sheShapingProfileEntry OBJECT-TYPE SYNTAX SheShapingProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each shaping profile. Selection of the used profile will be done via ShapingProfileAssignmentTable." INDEX { sheShapingProfileIndex } ::= { sheShapingProfileTable 1 } SheShapingProfileEntry ::= SEQUENCE { sheShapingProfileIndex Unsigned32, sheShapingProfileName OCTET STRING, sheShapingProfileCir Integer32, sheShapingProfileCbs Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.1 sheShapingProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-only STATUS current DESCRIPTION "A profile-table index." ::= { sheShapingProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.2 sheShapingProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name for this Shaping profile. Spaces and other special characters (: ?) are not allowed!! " ::= { sheShapingProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.3 sheShapingProfileCir OBJECT-TYPE SYNTAX Integer32 (0..102400) UNITS "kBit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Information Rate for downstream shaping. " ::= { sheShapingProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.4 sheShapingProfileCbs OBJECT-TYPE SYNTAX Integer32 (96..333000) UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Burst Size for downstream shaping. " ::= { sheShapingProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13 sheShapingProfileControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.1 sheShapingProfileControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createShapingProfile: sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs deleteShapingProfile: sheShapingProfileControlIndex modifyShapingProfile: sheShapingProfileControlIndex sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs" ::= { sheShapingProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.2 sheShapingProfileControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the configured table entry. Needed for modify or delete." ::= { sheShapingProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.3 sheShapingProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheShapingProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.4 sheShapingProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheShapingProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.5 sheShapingProfileControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheShapingProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.6 sheShapingProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheShapingProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.7 sheShapingProfileControlProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at ShapingProfileTable... Spaces and other special characters (: ?) are not allowed!! " ::= { sheShapingProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.8 sheShapingProfileControlProfileCir OBJECT-TYPE SYNTAX Integer32 (0..102400) UNITS "kBit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "look at ShapingProfileTable..." ::= { sheShapingProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.9 sheShapingProfileControlProfileCbs OBJECT-TYPE SYNTAX Integer32 (96..333000) UNITS "Bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "look at ShapingProfileTable..." ::= { sheShapingProfileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14 sheShapingProfileAssignmentTable OBJECT-TYPE SYNTAX SEQUENCE OF SheShapingProfileAssignmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The shaping profile assignment table." ::= { sheQueueConfiguration 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1 sheShapingProfileAssignmentEntry OBJECT-TYPE SYNTAX SheShapingProfileAssignmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for each assigned shaping profile. The assignment will use two indeces. First index is the ifIndex of the used subscriber port. Second index is the queue number. New with R2.8: There are two special values for queuenumber are supported, which allow to assign such a shaping profile to the lower (1..4) or upper (5..8) queue-group. If mode4QueueFlat is running, only the lower group is available. One shaping profile for all queues in queuemode mode8QueueFlat or modeHqs is not supported." INDEX { ifIndex, sheShapingProfileAssignmentQueueNumber } ::= { sheShapingProfileAssignmentTable 1 } SheShapingProfileAssignmentEntry ::= SEQUENCE { sheShapingProfileAssignmentQueueNumber Unsigned32, sheShapingProfileAssignmentProfileIndex Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.1 sheShapingProfileAssignmentQueueNumber OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8 | 255) MAX-ACCESS read-only STATUS current DESCRIPTION "The second index of this table. That represents the used Queue-Number for this ShapingProfile assignment. Note: Depending on the used card type, the number of available queues could be restricted to 4. An assignment to 8 queues will always be possible and the IU will then ignore the upper 4 queue configurations. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'. " ::= { sheShapingProfileAssignmentEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.2 sheShapingProfileAssignmentProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number." ::= { sheShapingProfileAssignmentEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15 sheShapingProfileAssignmentControl OBJECT IDENTIFIER ::= { sheQueueConfiguration 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.1 sheShapingProfileAssignmentControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "assignShapingProfile: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber sheShapingProfileAssignmentControlProfileIndex deleteShapingProfileAssignment: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber" ::= { sheShapingProfileAssignmentControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.2 sheShapingProfileAssignmentControlIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "ifIndex of the DSL-Interface where a shaping profile should be assigned. First index value for assignment." ::= { sheShapingProfileAssignmentControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.3 sheShapingProfileAssignmentControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheShapingProfileAssignmentControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.4 sheShapingProfileAssignmentControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheShapingProfileAssignmentControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.5 sheShapingProfileAssignmentControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheShapingProfileAssignmentControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.6 sheShapingProfileAssignmentControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheShapingProfileAssignmentControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.7 sheShapingProfileAssignmentControlQueueNumber OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "QueueNumber of the DSL-Interface where a shaping profile should be assigned. Second index value for assignment. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'." ::= { sheShapingProfileAssignmentControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.8 sheShapingProfileAssignmentControlProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number." ::= { sheShapingProfileAssignmentControl 8 } sheShapingNotifications OBJECT IDENTIFIER ::= { sheQueueConfiguration 16 } sheShapingProfileCreated NOTIFICATION-TYPE OBJECTS { sheShapingProfileControlIndex, sheShapingProfileControlTimeStamp, sheShapingProfileControlProfileName, sheShapingProfileControlProfileCir, sheShapingProfileControlProfileCbs } STATUS current DESCRIPTION "Configuration notification. A new shaping profile was created in sheShapingProfileTable." ::= { sheShapingNotifications 2 } sheShapingProfileModified NOTIFICATION-TYPE OBJECTS { sheShapingProfileControlIndex, sheShapingProfileControlTimeStamp, sheShapingProfileControlProfileName, sheShapingProfileControlProfileCir, sheShapingProfileControlProfileCbs } STATUS current DESCRIPTION "Configuration notification. A shaping profile was modified in sheShapingProfileTable." ::= { sheShapingNotifications 3 } sheShapingProfileDeleted NOTIFICATION-TYPE OBJECTS { sheShapingProfileControlIndex, sheShapingProfileControlTimeStamp } STATUS current DESCRIPTION "Configuration notification. A shaping profile was deleted from sheShapingProfileTable." ::= { sheShapingNotifications 4 } sheShapingProfileAssigned NOTIFICATION-TYPE OBJECTS { sheShapingProfileAssignmentControlIndex, sheShapingProfileAssignmentControlQueueNumber, sheShapingProfileAssignmentControlTimeStamp, sheShapingProfileAssignmentControlProfileIndex } STATUS current DESCRIPTION "Configuration notification. A shaping profile from sheShapingProfileTable was assigned to port.queuenumber." ::= { sheShapingNotifications 5 } sheShapingProfileAssignmentDeleted NOTIFICATION-TYPE OBJECTS { sheShapingProfileAssignmentControlIndex, sheShapingProfileAssignmentControlQueueNumber, sheShapingProfileAssignmentControlTimeStamp } STATUS current DESCRIPTION "Configuration notification. An existing shaping profile assignment was deleted from sheShapingProfileAssignmentTable." ::= { sheShapingNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.100 sheQueueConformance OBJECT IDENTIFIER ::= { sheQueueConfiguration 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.1 sheQueueCompliances OBJECT IDENTIFIER ::= { sheQueueConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.1.1 -- this module -- this module sheQueueCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheQueuePriorityGroup, sheQueueModeGroup, sheQueueModeControlGroup, sheQueueWeightGroup, sheQueueWeightControlGroup, sheQueueCardGroup, sheQueueCardControlGroup, sheShapingGroup, sheShapingControlGroup, sheShapingNotificationGroup, sheQueueNotificationGroup, sheQueuePriorityControlGroup } ::= { sheQueueCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2 sheQueueGroups OBJECT IDENTIFIER ::= { sheQueueConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.1 sheQueuePriorityGroup OBJECT-GROUP OBJECTS { sheQueuePriority, sheQueueNumber, sheReducedQueuePriority, sheReducedQueueNumber } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.3 sheQueuePriorityControlGroup OBJECT-GROUP OBJECTS { sheQueueControlRequest, sheQueueControlIndex, sheQueueControlStatus, sheQueueControlTimer, sheQueueControlTimeStamp, sheQueueControlReqResult, sheQueueControlQueueNumber } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.4 sheQueueModeGroup OBJECT-GROUP OBJECTS { sheQueueModeInterfaceTypeIndex, sheQueueConfigurationMode } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.5 sheQueueModeControlGroup OBJECT-GROUP OBJECTS { sheQueueModeControlRequest, sheQueueModeControlIndex, sheQueueModeControlStatus, sheQueueModeControlTimer, sheQueueModeControlReqResult, sheQueueModeControlTimeStamp, sheQueueModeControlMode } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.6 sheQueueWeightGroup OBJECT-GROUP OBJECTS { sheQueueIndex, sheQueueWeight, sheQueueWeightWatermarkLow, sheQueueWeightWatermarkHigh } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.7 sheQueueWeightControlGroup OBJECT-GROUP OBJECTS { sheQueueWeightControlRequest, sheQueueWeightControlIndex, sheQueueWeightControlStatus, sheQueueWeightControlTimer, sheQueueWeightControlReqResult, sheQueueWeightControlTimeStamp, sheQueueWeightControlWeight, sheQueueWeightControlWatermarkLow, sheQueueWeightControlWatermarkHigh } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 7 } sheQueueCardGroup OBJECT-GROUP OBJECTS { sheCardQueueInterfaceTypeIndex, sheCardQueueSchedulingMode, sheCardQueue1Weight, sheCardQueue1Watermarks, sheCardQueue2Weight, sheCardQueue2Watermarks, sheCardQueue3Weight, sheCardQueue3Watermarks, sheCardQueue4Weight, sheCardQueue4Watermarks, sheCardQueue5Weight, sheCardQueue5Watermarks, sheCardQueue6Weight, sheCardQueue6Watermarks, sheCardQueue7Weight, sheCardQueue7Watermarks, sheCardQueue8Weight, sheCardQueue8Watermarks, sheCardQueueColourAwareTCSource, sheCardQueueColourMarking, sheCardQueueDiscardPolicy, sheCardQueueMode, sheCardQueueHqsSecondStageInputQueue, sheCardQueueHqsFirstStagePir, sheCardQueueHqsFirstStagePbs } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 8 } sheQueueCardControlGroup OBJECT-GROUP OBJECTS { sheCardQueueControlRequest, sheCardQueueControlIndex, sheCardQueueControlStatus, sheCardQueueControlTimer, sheCardQueueControlReqResult, sheCardQueueControlTimeStamp, sheCardQueueControlInterfaceTypeIndex, sheCardQueueControlSchedulingMode, sheCardQueueControlQueue1Weight, sheCardQueueControlQueue1Watermarks, sheCardQueueControlQueue2Weight, sheCardQueueControlQueue2Watermarks, sheCardQueueControlQueue3Weight, sheCardQueueControlQueue3Watermarks, sheCardQueueControlQueue4Weight, sheCardQueueControlQueue4Watermarks, sheCardQueueControlQueue5Weight, sheCardQueueControlQueue5Watermarks, sheCardQueueControlQueue6Weight, sheCardQueueControlQueue6Watermarks, sheCardQueueControlQueue7Weight, sheCardQueueControlQueue7Watermarks, sheCardQueueControlQueue8Weight, sheCardQueueControlQueue8Watermarks, sheCardQueueControlColourAwareTCSource, sheCardQueueControlColourMarking, sheCardQueueControlDiscardPolicy, sheCardQueueControlMode, sheCardQueueControlHqsSecondStageInputQueue, sheCardQueueControlHqsFirstStagePir, sheCardQueueControlHqsFirstStagePbs } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2.8 sheQueueNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheQueuePriorityMappingModified, sheQueueModeEntryModified, sheQueueWeightEntryModified, sheReducedQueuePriorityMappingModified, sheCardQueueEntryConfigured, sheCardQueueEntryDeleted, sheCardQueueEntryConfigResult } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 10 } sheShapingGroup OBJECT-GROUP OBJECTS { sheShapingProfileIndex, sheShapingProfileName, sheShapingProfileCir, sheShapingProfileCbs, sheShapingProfileAssignmentQueueNumber, sheShapingProfileAssignmentProfileIndex } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 11 } sheShapingControlGroup OBJECT-GROUP OBJECTS { sheShapingProfileControlRequest, sheShapingProfileControlIndex, sheShapingProfileControlStatus, sheShapingProfileControlTimer, sheShapingProfileControlReqResult, sheShapingProfileControlTimeStamp, sheShapingProfileControlProfileName, sheShapingProfileControlProfileCir, sheShapingProfileControlProfileCbs, sheShapingProfileAssignmentControlRequest, sheShapingProfileAssignmentControlIndex, sheShapingProfileAssignmentControlStatus, sheShapingProfileAssignmentControlTimer, sheShapingProfileAssignmentControlReqResult, sheShapingProfileAssignmentControlTimeStamp, sheShapingProfileAssignmentControlQueueNumber, sheShapingProfileAssignmentControlProfileIndex } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 12 } sheShapingNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheShapingProfileCreated, sheShapingProfileModified, sheShapingProfileDeleted, sheShapingProfileAssigned, sheShapingProfileAssignmentDeleted } STATUS current DESCRIPTION "Description." ::= { sheQueueGroups 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9 sheErp OBJECT IDENTIFIER ::= { sheBridgeMib 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1 sheErpBase OBJECT IDENTIFIER ::= { sheErp 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1 sheErpBaseParam OBJECT IDENTIFIER ::= { sheErpBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1.1 sheErpDomainTrafficVlan OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4096)) MAX-ACCESS read-only STATUS current DESCRIPTION "This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN." ::= { sheErpBaseParam 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2 sheErpBaseControl OBJECT IDENTIFIER ::= { sheErpBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.1 sheErpBaseControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. - modifyErpDomainTrafficVlan parameters: sheErpBaseControlDomainTrafficVlan" ::= { sheErpBaseControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.2 sheErpBaseControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheErpBaseControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.3 sheErpBaseControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheErpBaseControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.4 sheErpBaseControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheErpBaseControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.5 sheErpBaseControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheErpBaseControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.6 sheErpBaseControlDomainTrafficVlan OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "This octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN. parameter for - modifyErpDomainTrafficVlan" ::= { sheErpBaseControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2 sheErpDomain OBJECT IDENTIFIER ::= { sheErp 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1 sheErpDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF SheErpDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ERP domains configuration table with static entries." ::= { sheErpDomain 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1 sheErpDomainEntry OBJECT-TYPE SYNTAX SheErpDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ERP Domain entry." INDEX { sheErpDomainIndex } ::= { sheErpDomainTable 1 } SheErpDomainEntry ::= SEQUENCE { sheErpDomainIndex Unsigned32, sheErpDomainName DisplayString, sheErpDomainPrimaryPort SheBridgePortIndexOrInvalid, sheErpDomainSecondaryPort SheBridgePortIndexOrInvalid, sheErpDomainWaitToRestoreTime Unsigned32, sheErpDomainTestPacketInterval Unsigned32, sheErpDomainLearningDisabledTime Unsigned32, sheErpDomainProtectionActivation ShePermissionType, sheErpDomainOperatorRequest SheErpDomainOperatorRequestType, sheErpDomainNodeMode SheErpNodeType, sheErpDomainControlVlan SheVlanIdOrInvalid, sheErpDomainNodeStatus SheErpDomainNodeStatusType, sheErpDomainRingStatus SheErpDomainRingStatusType, sheErpDomainLotp TruthValue, sheErpDomainUlotp TruthValue, sheErpDomainMultipleRm TruthValue, sheErpDomainRmReach TruthValue, sheErpDomainLotpTrapEnable ShePermissionType, sheErpDomainUlotpTrapEnable ShePermissionType, sheErpDomainMultipleRmTrapEnable ShePermissionType, sheErpDomainRmReachTrapEnable ShePermissionType, sheErpDomainAlarmSeverityIndex SheAlarmSevProfileIndex } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.1 sheErpDomainIndex OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies an ERP domain." ::= { sheErpDomainEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.2 sheErpDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The associated name of the ERP Domain. Spaces and other special characters (: ?) are not allowed!! " ::= { sheErpDomainEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.3 sheErpDomainPrimaryPort OBJECT-TYPE SYNTAX SheBridgePortIndexOrInvalid MAX-ACCESS read-only STATUS current DESCRIPTION "The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid)." DEFVAL { -1 } ::= { sheErpDomainEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.4 sheErpDomainSecondaryPort OBJECT-TYPE SYNTAX SheBridgePortIndexOrInvalid MAX-ACCESS read-only STATUS current DESCRIPTION "The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid)." DEFVAL { -1 } ::= { sheErpDomainEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.5 sheErpDomainWaitToRestoreTime OBJECT-TYPE SYNTAX Unsigned32 (2..720) UNITS "1 s" MAX-ACCESS read-only STATUS current DESCRIPTION "Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. Range 2..720." DEFVAL { 2 } ::= { sheErpDomainEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.6 sheErpDomainTestPacketInterval OBJECT-TYPE SYNTAX Unsigned32 (10..500) UNITS "1 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps." DEFVAL { 10 } ::= { sheErpDomainEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.7 sheErpDomainLearningDisabledTime OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "1 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms." DEFVAL { 50 } ::= { sheErpDomainEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.8 sheErpDomainProtectionActivation OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents if ERP Protection activation is activated or deactivated (admin state). When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active " ::= { sheErpDomainEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.9 sheErpDomainOperatorRequest OBJECT-TYPE SYNTAX SheErpDomainOperatorRequestType MAX-ACCESS read-only STATUS current DESCRIPTION "Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port." DEFVAL { 2 } ::= { sheErpDomainEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.10 sheErpDomainNodeMode OBJECT-TYPE SYNTAX SheErpNodeType MAX-ACCESS read-only STATUS current DESCRIPTION "An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2)" DEFVAL { 1 } ::= { sheErpDomainEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.11 sheErpDomainControlVlan OBJECT-TYPE SYNTAX SheVlanIdOrInvalid MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile." DEFVAL { -1 } ::= { sheErpDomainEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.12 sheErpDomainNodeStatus OBJECT-TYPE SYNTAX SheErpDomainNodeStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the domain node status. rmIdle(1) primaryProtecting(2) protecting(3) idle(4) failed-S(5) failed-P(6) preForward(7) isolated(8) deactivated(9) backoff(10)" ::= { sheErpDomainEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.13 sheErpDomainRingStatus OBJECT-TYPE SYNTAX SheErpDomainRingStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Actual protection state of the ERP domain on the ring. The following three states are defined: Normal - All ring nodes are available and used. Protecting - At least one Link on the ring is failed. Unknown - This state is used when the ERP protection is not activated, or when the Multiple Failures are detected in a Normal Node." ::= { sheErpDomainEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.14 sheErpDomainLotp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive " ::= { sheErpDomainEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.15 sheErpDomainUlotp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive " ::= { sheErpDomainEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.16 sheErpDomainMultipleRm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain Multiple Redundancy Manager alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactive " ::= { sheErpDomainEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.17 sheErpDomainRmReach OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "RM Node reacheability alarm status. Erp domain detection of mutiple failures in the ring cause the RM Node to become unreacheable to this normal node (only meaningful for normal nodes). true(1) - RM Node is unreacheable, alarm active false(2) - RM Node is reacheable, alarm inactive " ::= { sheErpDomainEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.18 sheErpDomainLotpTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1)" DEFVAL { permit } ::= { sheErpDomainEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.19 sheErpDomainUlotpTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1)" DEFVAL { permit } ::= { sheErpDomainEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.20 sheErpDomainMultipleRmTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1)" DEFVAL { permit } ::= { sheErpDomainEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.21 sheErpDomainRmReachTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) " DEFVAL { permit } ::= { sheErpDomainEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.22 sheErpDomainAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain." DEFVAL { 1 } ::= { sheErpDomainEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2 sheErpDomainControl OBJECT IDENTIFIER ::= { sheErpDomain 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.1 sheErpDomainControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainEntry(826) parameters: - sheErpDomainControlDomainIndex - sheErpDomainControlDomainName - sheErpDomainControlDomainPrimaryPort - sheErpDomainControlDomainSecondaryPort - sheErpDomainControlWaitToRestoreTime - sheErpDomainControlTestPacketInterval - sheErpDomainControlLearningDisabledTime - sheErpDomainControlDomainNodeMode - sheErpDomainControlDomainControlVlan - sheErpDomainControlLotpTrapEnable - sheErpDomainControlUlotpTrapEnable - sheErpDomainControlMultipleRmTrapEnable - sheErpDomainControlRmReachTrapEnable - sheErpDomainControlAlarmSeverityIndex activateErpDomain(827) - sheErpDomainControlDomainIndex - sheErpDomainControlProtectionActivation operatorRequestErpDomain(828) - sheErpDomainControlDomainIndex - sheErpDomainControlOperatorRequest " ::= { sheErpDomainControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.2 sheErpDomainControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheErpDomainControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.3 sheErpDomainControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheErpDomainControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.4 sheErpDomainControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheErpDomainControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.5 sheErpDomainControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheErpDomainControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.6 sheErpDomainControlDomainIndex OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "An index value that uniquely identifies an ERP domain. parameter for - modifyErpDomainEntry - modifyErpDomainTraps - activateErpDomain - operatorRequestErpDomain" ::= { sheErpDomainControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.7 sheErpDomainControlDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The associated name of the ERP Domain. Spaces and other special characters (: ?) are not allowed!! parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.8 sheErpDomainControlDomainPrimaryPort OBJECT-TYPE SYNTAX SheBridgePortIndexOrInvalid MAX-ACCESS read-write STATUS current DESCRIPTION "The sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.9 sheErpDomainControlDomainSecondaryPort OBJECT-TYPE SYNTAX SheBridgePortIndexOrInvalid MAX-ACCESS read-write STATUS current DESCRIPTION "The sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.10 sheErpDomainControlWaitToRestoreTime OBJECT-TYPE SYNTAX Unsigned32 (2..720) UNITS "1 s" MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.11 sheErpDomainControlTestPacketInterval OBJECT-TYPE SYNTAX Unsigned32 (10..500) UNITS "1 ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps. parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.12 sheErpDomainControlLearningDisabledTime OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "1 ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms. parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.13 sheErpDomainControlProtectionActivation OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents if ERP Protection activation is activated or deactivated. When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active parameter for - activateErpDomain" ::= { sheErpDomainControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.14 sheErpDomainControlOperatorRequest OBJECT-TYPE SYNTAX SheErpDomainOperatorRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Two operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port. parameter for - operatorRequestErpDomain" ::= { sheErpDomainControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.15 sheErpDomainControlDomainNodeMode OBJECT-TYPE SYNTAX SheErpNodeType MAX-ACCESS read-write STATUS current DESCRIPTION "An ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2) parameter for - modifyErpDomainEntry " ::= { sheErpDomainControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.16 sheErpDomainControlDomainControlVlan OBJECT-TYPE SYNTAX SheVlanIdOrInvalid MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile. parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.17 sheErpDomainControlLotpTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Erp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.18 sheErpDomainControlUlotpTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Erp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.19 sheErpDomainControlMultipleRmTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Erp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.20 sheErpDomainControlRmReachTrapEnable OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "Erp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.21 sheErpDomainControlAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain. parameter for - modifyErpDomainEntry" ::= { sheErpDomainControl 21 } sheErpDomainGlobalGroup OBJECT IDENTIFIER ::= { sheErpDomain 3 } sheErpDomainGlobalMacLearningDelay OBJECT-TYPE SYNTAX SheEnableType MAX-ACCESS read-only STATUS current DESCRIPTION "Enable / disable the MAC learning delay globaly. Default: disable When this parameter is set to enable, ERP enhancement solution will be actived. ERP module will apply hardware MAC learning after FDB flush. if this parameter is set to disable, ERP module will work the same as before." ::= { sheErpDomainGlobalGroup 1 } sheErpDomainGlobalMacLearningDelayTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "10 msec" MAX-ACCESS read-only STATUS current DESCRIPTION "Configure the MAC learning delay time. Value range: 10~to be defined, the increasement granularity is 10 ms default: to be defined. This parameter specify how long the hardware MAC learning will last in condition that sheErpDomainMacLearningDelay is enabled." ::= { sheErpDomainGlobalGroup 2 } sheErpDomainGlobalControl OBJECT IDENTIFIER ::= { sheErpDomain 4 } sheErpDomainGlobalControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainGlobalGroup(829) parameters: sheErpDomainGlobalMacLearningDelay sheErpDomainGolobalMacLearningDelayTimer" ::= { sheErpDomainGlobalControl 1 } sheErpDomainGlobalControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheErpDomainGlobalControl 2 } sheErpDomainGlobalControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheErpDomainGlobalControl 3 } sheErpDomainGlobalControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheErpDomainGlobalControl 4 } sheErpDomainGlobalControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheErpDomainGlobalControl 5 } sheErpDomainGlobalControlMacLearningDelay OBJECT-TYPE SYNTAX SheEnableType MAX-ACCESS read-write STATUS current DESCRIPTION " Enable / disable the MAC learning delay globaly." ::= { sheErpDomainGlobalControl 6 } sheErpDomainGlobalControlMacLearningDelayTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "10 msec" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the MAC learning delay time." ::= { sheErpDomainGlobalControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3 sheErpNotifications OBJECT IDENTIFIER ::= { sheErp 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1 sheErpEvents OBJECT IDENTIFIER ::= { sheErpNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.1 sheErpDomainRingStatusChange NOTIFICATION-TYPE OBJECTS { sheErpDomainControlTimestamp, sheErpDomainControlDomainIndex, sheErpDomainRingStatus } STATUS current DESCRIPTION "This trap is set whenever there is a change in the erpDomainRingStatus." ::= { sheErpEvents 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.2 sheErpDomainNodeStatusChange NOTIFICATION-TYPE OBJECTS { sheErpDomainControlTimestamp, sheErpDomainControlDomainIndex, sheErpDomainNodeStatus } STATUS current DESCRIPTION "This trap is set whenever there is a change in the erpDomainNodeStatus." ::= { sheErpEvents 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.3 sheErpDomainTrafficVlanModified NOTIFICATION-TYPE OBJECTS { sheErpBaseControlTimestamp, sheErpDomainTrafficVlan } STATUS current DESCRIPTION "Mapping of ERP domains to traffic VLANs modified." ::= { sheErpEvents 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.4 sheErpDomainEntryModified NOTIFICATION-TYPE OBJECTS { sheErpDomainControlTimestamp, sheErpDomainControlDomainIndex, sheErpDomainName, sheErpDomainPrimaryPort, sheErpDomainSecondaryPort, sheErpDomainWaitToRestoreTime, sheErpDomainTestPacketInterval, sheErpDomainLearningDisabledTime, sheErpDomainNodeMode, sheErpDomainControlVlan, sheErpDomainLotpTrapEnable, sheErpDomainUlotpTrapEnable, sheErpDomainMultipleRmTrapEnable, sheErpDomainRmReachTrapEnable, sheErpDomainAlarmSeverityIndex } STATUS current DESCRIPTION "ERP domain entry modified." ::= { sheErpEvents 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.5 sheErpDomainProtectionModified NOTIFICATION-TYPE OBJECTS { sheErpDomainControlTimestamp, sheErpDomainControlDomainIndex, sheErpDomainProtectionActivation } STATUS current DESCRIPTION "The ERP domain activation has been modified by the operator." ::= { sheErpEvents 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.6 sheErpDomainManualSwitch NOTIFICATION-TYPE OBJECTS { sheErpDomainControlTimestamp, sheErpDomainControlDomainIndex, sheErpDomainOperatorRequest } STATUS current DESCRIPTION "The ERP domain RM node port swap has been modified by the operator." ::= { sheErpEvents 6 } sheErpDomainGlobalGroupModified NOTIFICATION-TYPE OBJECTS { sheErpDomainGlobalControlTimestamp, sheErpDomainGlobalControlReqResult, sheErpDomainGlobalControlMacLearningDelay, sheErpDomainGlobalControlMacLearningDelayTimer } STATUS current DESCRIPTION "Modify global parameters of ERP domain." ::= { sheErpEvents 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2 sheErpAlarms OBJECT IDENTIFIER ::= { sheErpNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.1 sheErpDomainLotpAlmTrap NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Loss of TestPackets state change trap." ::= { sheErpAlarms 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.2 sheErpDomainUlotpAlmTrap NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Unidirectional Loss of TestPackets state change trap." ::= { sheErpAlarms 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.3 sheErpDomainMultipleRmAlmTrap NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Multiple RM state change trap." ::= { sheErpAlarms 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.4 sheErpDomainRmReachAlmTrap NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Rm Node Unreacheable state change trap." ::= { sheErpAlarms 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4 sheErpConformance OBJECT IDENTIFIER ::= { sheErp 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.1 sheErpCompliances OBJECT IDENTIFIER ::= { sheErpConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.1.1 -- this module -- this module sheErpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheErpBaseGroup, sheErpBaseControlGroup, sheErpDomainGroup, sheErpDomainControlGroup, sheErpNotificationGroup } ::= { sheErpCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2 sheErpGroups OBJECT IDENTIFIER ::= { sheErpConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2.1 sheErpBaseGroup OBJECT-GROUP OBJECTS { sheErpDomainTrafficVlan } STATUS current DESCRIPTION "Description." ::= { sheErpGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2.2 sheErpBaseControlGroup OBJECT-GROUP OBJECTS { sheErpBaseControlRequest, sheErpBaseControlStatus, sheErpBaseControlTimestamp, sheErpBaseControlReqResult, sheErpBaseControlTimer, sheErpBaseControlDomainTrafficVlan } STATUS current DESCRIPTION "Description." ::= { sheErpGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2.3 sheErpDomainGroup OBJECT-GROUP OBJECTS { sheErpDomainIndex, sheErpDomainName, sheErpDomainPrimaryPort, sheErpDomainSecondaryPort, sheErpDomainWaitToRestoreTime, sheErpDomainTestPacketInterval, sheErpDomainLearningDisabledTime, sheErpDomainProtectionActivation, sheErpDomainOperatorRequest, sheErpDomainNodeMode, sheErpDomainControlVlan, sheErpDomainNodeStatus, sheErpDomainRingStatus, sheErpDomainLotp, sheErpDomainUlotp, sheErpDomainMultipleRm, sheErpDomainRmReach, sheErpDomainLotpTrapEnable, sheErpDomainUlotpTrapEnable, sheErpDomainMultipleRmTrapEnable, sheErpDomainRmReachTrapEnable, sheErpDomainAlarmSeverityIndex, sheErpDomainGlobalMacLearningDelay, sheErpDomainGlobalMacLearningDelayTimer } STATUS current DESCRIPTION "Description." ::= { sheErpGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2.4 sheErpDomainControlGroup OBJECT-GROUP OBJECTS { sheErpDomainControlRequest, sheErpDomainControlStatus, sheErpDomainControlTimestamp, sheErpDomainControlReqResult, sheErpDomainControlTimer, sheErpDomainControlDomainIndex, sheErpDomainControlDomainName, sheErpDomainControlDomainPrimaryPort, sheErpDomainControlDomainSecondaryPort, sheErpDomainControlWaitToRestoreTime, sheErpDomainControlTestPacketInterval, sheErpDomainControlLearningDisabledTime, sheErpDomainControlProtectionActivation, sheErpDomainControlOperatorRequest, sheErpDomainControlDomainNodeMode, sheErpDomainControlDomainControlVlan, sheErpDomainControlLotpTrapEnable, sheErpDomainControlUlotpTrapEnable, sheErpDomainControlMultipleRmTrapEnable, sheErpDomainControlRmReachTrapEnable, sheErpDomainControlAlarmSeverityIndex, sheErpDomainGlobalControlRequest, sheErpDomainGlobalControlStatus, sheErpDomainGlobalControlTimestamp, sheErpDomainGlobalControlReqResult, sheErpDomainGlobalControlTimer, sheErpDomainGlobalControlMacLearningDelay, sheErpDomainGlobalControlMacLearningDelayTimer } STATUS current DESCRIPTION "Description." ::= { sheErpGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.9.4.2.5 sheErpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheErpDomainTrafficVlanModified, sheErpDomainEntryModified, sheErpDomainLotpAlmTrap, sheErpDomainUlotpAlmTrap, sheErpDomainMultipleRmAlmTrap, sheErpDomainRmReachAlmTrap, sheErpDomainProtectionModified, sheErpDomainManualSwitch, sheErpDomainNodeStatusChange, sheErpDomainRingStatusChange, sheErpDomainGlobalGroupModified } STATUS current DESCRIPTION "Description." ::= { sheErpGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10 sheBcsc OBJECT IDENTIFIER ::= { sheBridgeMib 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1 sheBcscTable OBJECT-TYPE SYNTAX SEQUENCE OF SheBcscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has one entry for each combination of port or vlan and traffic type where broadcast storm control has to be performed." ::= { sheBcsc 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1 sheBcscEntry OBJECT-TYPE SYNTAX SheBcscEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies per port or vlan and per traffic type the broadcast storm control parameters, i.e. how many packets/bits per second can be received." INDEX { sheBcscIndex } ::= { sheBcscTable 1 } SheBcscEntry ::= SEQUENCE { sheBcscIndex Unsigned32, sheBcscType SheBcscTrafficType, sheBcscConfigScope SheBcscScopeType, sheBcscConfigIndex Unsigned32, sheBcscThresholdType SheBcscThresholdType, sheBcscThresholdValue Unsigned32, sheBcscVendorSpecific OCTET STRING, sheBcscAlarmDebounceTimer Unsigned32, sheBcscAlarmSeverityIndex SheAlarmSevProfileIndex } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.1 sheBcscIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Primary key for the table." ::= { sheBcscEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.2 sheBcscType OBJECT-TYPE SYNTAX SheBcscTrafficType MAX-ACCESS read-only STATUS current DESCRIPTION "Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast)" ::= { sheBcscEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.3 sheBcscConfigScope OBJECT-TYPE SYNTAX SheBcscScopeType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan " ::= { sheBcscEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.4 sheBcscConfigIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093." ::= { sheBcscEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.5 sheBcscThresholdType OBJECT-TYPE SYNTAX SheBcscThresholdType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second" ::= { sheBcscEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.6 sheBcscThresholdValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period." ::= { sheBcscEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.7 sheBcscVendorSpecific OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "For some vendors, multicast address can be specified." ::= { sheBcscEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.8 sheBcscAlarmDebounceTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time between two alarm traps sent by the BSCS instance." ::= { sheBcscEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.9 sheBcscAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance." ::= { sheBcscEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2 sheBcscControl OBJECT IDENTIFIER ::= { sheBcsc 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.1 sheBcscControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. 501 - createBcscEntry parameters: sheBcscControlType sheBcscControlConfigScope sheBcscControlConfigIndex sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 502 - modifyBcscEntry parameters: sheBcscControlIndex sheBcscControlType sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 503 - deleteBcscEntry parameters: sheBcscControlIndex" ::= { sheBcscControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.2 sheBcscControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheBcscControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.3 sheBcscControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheBcscControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.4 sheBcscControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheBcscControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.5 sheBcscControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheBcscControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.6 sheBcscControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Primary key for the table, created by the NE. Parameter for 502 - modifyBcscEntry 503 - deleteBcscEntry" ::= { sheBcscControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.7 sheBcscControlType OBJECT-TYPE SYNTAX SheBcscTrafficType MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast) Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.8 sheBcscControlConfigScope OBJECT-TYPE SYNTAX SheBcscScopeType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan Parameter for 501 - createBcscEntry " ::= { sheBcscControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.9 sheBcscControlConfigIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093. Parameter for 501 - createBcscEntry " ::= { sheBcscControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.10 sheBcscControlThresholdType OBJECT-TYPE SYNTAX SheBcscThresholdType MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.11 sheBcscControlThresholdValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.12 sheBcscControlVendorSpecific OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "For some vendors, multicast address can be specified. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.13 sheBcscControlAlarmDebounceTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time between two alarm traps sent by the BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.14 sheBcscControlAlarmSeverityIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntry" ::= { sheBcscControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3 sheBcscNotifications OBJECT IDENTIFIER ::= { sheBcsc 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1 sheBcscEvents OBJECT IDENTIFIER ::= { sheBcscNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.1 sheBcscEntryCreated NOTIFICATION-TYPE OBJECTS { sheBcscControlTimestamp, sheBcscControlIndex, sheBcscType, sheBcscConfigScope, sheBcscConfigIndex, sheBcscThresholdType, sheBcscThresholdValue, sheBcscVendorSpecific, sheBcscAlarmDebounceTimer, sheBcscAlarmSeverityIndex } STATUS current DESCRIPTION "New entry in the sheBcscTable has been created." ::= { sheBcscEvents 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.2 sheBcscEntryModified NOTIFICATION-TYPE OBJECTS { sheBcscControlTimestamp, sheBcscControlIndex, sheBcscType, sheBcscConfigScope, sheBcscConfigIndex, sheBcscThresholdType, sheBcscThresholdValue, sheBcscVendorSpecific, sheBcscAlarmDebounceTimer, sheBcscAlarmSeverityIndex } STATUS current DESCRIPTION "Existing entry in the sheBcscTable has been modified." ::= { sheBcscEvents 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.3 sheBcscEntryDeleted NOTIFICATION-TYPE OBJECTS { sheBcscControlTimestamp, sheBcscControlIndex } STATUS current DESCRIPTION "Entry in the sheBcscTable has been deleted." ::= { sheBcscEvents 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2 sheBcscAlarms OBJECT IDENTIFIER ::= { sheBcscNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2.1 sheBcscThresholdExceeded NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Maximum traffic amount has reached threshold within the 1 second measuring interval, further traffic of that type is dropped during the next time period." ::= { sheBcscAlarms 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4 sheBcscConformance OBJECT IDENTIFIER ::= { sheBcsc 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.1 sheBcscCompliances OBJECT IDENTIFIER ::= { sheBcscConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.1.1 -- this module -- this module sheBcscCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheBcscGroup, sheBcscControlGroup, sheBcscNotificationGroup } ::= { sheBcscCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.2 sheBcscGroups OBJECT IDENTIFIER ::= { sheBcscConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.2.1 sheBcscGroup OBJECT-GROUP OBJECTS { sheBcscIndex, sheBcscType, sheBcscConfigScope, sheBcscConfigIndex, sheBcscThresholdType, sheBcscThresholdValue, sheBcscVendorSpecific, sheBcscAlarmDebounceTimer, sheBcscAlarmSeverityIndex } STATUS current DESCRIPTION "Description." ::= { sheBcscGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.2.2 sheBcscControlGroup OBJECT-GROUP OBJECTS { sheBcscControlRequest, sheBcscControlStatus, sheBcscControlTimestamp, sheBcscControlReqResult, sheBcscControlTimer, sheBcscControlIndex, sheBcscControlType, sheBcscControlConfigScope, sheBcscControlConfigIndex, sheBcscControlThresholdType, sheBcscControlThresholdValue, sheBcscControlVendorSpecific, sheBcscControlAlarmDebounceTimer, sheBcscControlAlarmSeverityIndex } STATUS current DESCRIPTION "Description." ::= { sheBcscGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.10.4.2.3 sheBcscNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheBcscEntryCreated, sheBcscEntryModified, sheBcscEntryDeleted, sheBcscThresholdExceeded } STATUS current DESCRIPTION "Description." ::= { sheBcscGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11 sheMstpConfig OBJECT IDENTIFIER ::= { sheBridgeMib 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1 sheMstpBase OBJECT IDENTIFIER ::= { sheMstpConfig 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1 sheMstpBaseParam OBJECT IDENTIFIER ::= { sheMstpBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.1 sheMstpBaseStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable spanning tree." ::= { sheMstpBaseParam 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.2 sheMstpBaseConfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MST configuration determines to which MST region Spaces and other special characters (: ?) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name." ::= { sheMstpBaseParam 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.3 sheMstpBaseRevisionLevel OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535." ::= { sheMstpBaseParam 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.4 sheMstpBaseConfIdVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4096)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. " ::= { sheMstpBaseParam 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2 sheMstpBaseControl OBJECT IDENTIFIER ::= { sheMstpBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.1 sheMstpBaseControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. - modifyMstpBaseStatus parameters: sheMstpBaseControlBaseStatus - modifyMstpBaseConfig parameters: sheMstpBaseControlConfName sheMstpBaseControlRevisionLevel - modifyMstpBaseConfIdVlanIdList parameters: sheMstpBaseControlConfIdVlanIdList" ::= { sheMstpBaseControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.2 sheMstpBaseControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheMstpBaseControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.3 sheMstpBaseControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheMstpBaseControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.4 sheMstpBaseControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheMstpBaseControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.5 sheMstpBaseControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheMstpBaseControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.6 sheMstpBaseControlBaseStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable spanning tree. parameter of - modifyMstpBaseStatus" ::= { sheMstpBaseControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.7 sheMstpBaseControlConfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The MST configuration determines to which MST region Spaces and other special characters (: ?) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. parameter of - modifyMstpBaseConfig" ::= { sheMstpBaseControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.8 sheMstpBaseControlRevisionLevel OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535. parameter of - modifyMstpBaseConfig" ::= { sheMstpBaseControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.9 sheMstpBaseControlConfIdVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4096)) MAX-ACCESS read-write STATUS current DESCRIPTION "The MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. parameter of - modifyMstpBaseConfIdVlanIdList" ::= { sheMstpBaseControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2 sheMstp OBJECT IDENTIFIER ::= { sheMstpConfig 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1 sheMstpBridgeProtoParamTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMstpBridgeProtoParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries." ::= { sheMstp 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1 sheMstpBridgeProtoParamEntry OBJECT-TYPE SYNTAX SheMstpBridgeProtoParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. Note that each MST region can only support up to 16 spanning-tree instances." INDEX { sheMstpBridgeProtoParamIndex } ::= { sheMstpBridgeProtoParamTable 1 } SheMstpBridgeProtoParamEntry ::= SEQUENCE { sheMstpBridgeProtoParamIndex Unsigned32, sheMstpBridgeProtoParamBridgeId OCTET STRING, sheMstpBridgeProtoParamBridgePriority Unsigned32, sheMstpBridgeProtoParamTcTime TimeTicks, sheMstpBridgeProtoParamTcCount Counter32, sheMstpBridgeProtoParamTc TruthValue, sheMstpBridgeProtoParamDesignatedRoot OCTET STRING, sheMstpBridgeProtoParamRootPort Unsigned32, sheMstpBridgeProtoParamRootPathCost Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.1 sheMstpBridgeProtoParamIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The primary key for the table. One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries." ::= { sheMstpBridgeProtoParamEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.2 sheMstpBridgeProtoParamBridgeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address." ::= { sheMstpBridgeProtoParamEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.3 sheMstpBridgeProtoParamBridgePriority OBJECT-TYPE SYNTAX Unsigned32 (1..61472) MAX-ACCESS read-only STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. The configured value for the MstpBridgeProtoParamPriority should be completed by a fixed offsett, depending on the Mstp-Instance ID. That means, a configured priority-value of 4097 is valid for Mstp instance 1. Instance 2 will use 4098 in that case and instance 32 will have a MstpBridgeProtoParamPriority of 4128. Default value should be 32769 for MSTP-Instance 1 and 32800 for instance 32. " ::= { sheMstpBridgeProtoParamEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.4 sheMstpBridgeProtoParamTcTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the last topology change." ::= { sheMstpBridgeProtoParamEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.5 sheMstpBridgeProtoParamTcCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized. " ::= { sheMstpBridgeProtoParamEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.6 sheMstpBridgeProtoParamTc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A topology change has been detected." ::= { sheMstpBridgeProtoParamEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.7 sheMstpBridgeProtoParamDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { sheMstpBridgeProtoParamEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.8 sheMstpBridgeProtoParamRootPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex." ::= { sheMstpBridgeProtoParamEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.9 sheMstpBridgeProtoParamRootPathCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch. " ::= { sheMstpBridgeProtoParamEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2 sheMstpPortParamTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMstpPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds the MSTP parameters on a per-port basis. The first key is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). The second key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports." ::= { sheMstp 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1 sheMstpPortParamEntry OBJECT-TYPE SYNTAX SheMstpPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds the MSTP parameters on a per-port basis. A free running index is used as key. There is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). There is a seconde pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports." INDEX { sheMstpPortParamTableIndex } ::= { sheMstpPortParamTable 1 } SheMstpPortParamEntry ::= SEQUENCE { sheMstpPortParamTableIndex Unsigned32, sheMstpPortParamProtoIndex Unsigned32, sheMstpPortParamPortIndex Unsigned32, sheMstpPortParamUpTime TimeTicks, sheMstpPortParamState SheMstpPortParamStateType, sheMstpPortParamPortId OCTET STRING, sheMstpPortParamPortPriority Unsigned32, sheMstpPortParamAdminPathCost Unsigned32, sheMstpPortParamDesignatedRoot OCTET STRING, sheMstpPortParamDesignatedBridge OCTET STRING, sheMstpPortParamDesignatedPort OCTET STRING, sheMstpPortParamDesignatedCost Unsigned32, sheMstpPortParamPortRole SheMstpPortParamPortRoleType, sheMstpPortParamCurrentPathCost Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.1 sheMstpPortParamTableIndex OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "A free running simple table index." ::= { sheMstpPortParamEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.2 sheMstpPortParamProtoIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The MSTP profile, the table entry is related to, is the first key of the table. This object points to the sheMstpBridgeProtoParamTable (same as sheMstpBridgeProtoParamIndex)." ::= { sheMstpPortParamEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.3 sheMstpPortParamPortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port, the table entry is related to, is the second key of the table. This object points to the sheBridgePortTable (same as sheBridgePortIndex)." ::= { sheMstpPortParamEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.4 sheMstpPortParamUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The total time the port was in the forwarding state since the management entity was last reset or initialized. " ::= { sheMstpPortParamEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.5 sheMstpPortParamState OBJECT-TYPE SYNTAX SheMstpPortParamStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port." ::= { sheMstpPortParamEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.6 sheMstpPortParamPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management." ::= { sheMstpPortParamEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.7 sheMstpPortParamPortPriority OBJECT-TYPE SYNTAX Unsigned32 (0..240) MAX-ACCESS read-only STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority." ::= { sheMstpPortParamEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.8 sheMstpPortParamAdminPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system." ::= { sheMstpPortParamEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.9 sheMstpPortParamDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { sheMstpPortParamEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.10 sheMstpPortParamDesignatedBridge OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port." ::= { sheMstpPortParamEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.11 sheMstpPortParamDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port identifier of the port that transmitted a BPDU to me." ::= { sheMstpPortParamEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.12 sheMstpPortParamDesignatedCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch." ::= { sheMstpPortParamEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.13 sheMstpPortParamPortRole OBJECT-TYPE SYNTAX SheMstpPortParamPortRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology." ::= { sheMstpPortParamEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.14 sheMstpPortParamCurrentPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "These value represent the current pathcost value for this port." ::= { sheMstpPortParamEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3 sheMstpControl OBJECT IDENTIFIER ::= { sheMstp 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.1 sheMstpControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. sheMstpBridgeProtoParamTable - resetMstpTc parameters: sheMstpControlBridgeProtoParamIndex - modifyMstpBridgeParamEntry parameters: sheMstpControlBridgeProtoParamIndex sheMstpControlBridgeProtoParamBridgePriority sheMstpPortParamTable - modifyMstpPortParamEntry parameters: sheMstpControlPortParamTableIndex sheMstpControlPortParamPortPriority sheMstpControlPortParamAdminPathCost" ::= { sheMstpControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.2 sheMstpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheMstpControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.3 sheMstpControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheMstpControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.4 sheMstpControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheMstpControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.5 sheMstpControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheMstpControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.6 sheMstpControlBridgeProtoParamIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selects a table entry that holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. Parameter for - resetMstpTc - modifyMstpBridgeParamEntry" ::= { sheMstpControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.7 sheMstpControlBridgeProtoParamBridgePriority OBJECT-TYPE SYNTAX Unsigned32 UNITS "multiple of 4096 + Mstp-Instance ID" MAX-ACCESS read-write STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. Parameter for - modifyMstpBridgeParamEntry" ::= { sheMstpControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.8 sheMstpControlPortParamTableIndex OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "A free running simple table index." ::= { sheMstpControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.9 sheMstpControlPortParamPortPriority OBJECT-TYPE SYNTAX Unsigned32 (0..240) UNITS "multiple of 16" MAX-ACCESS read-write STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyMstpPortParamEntry" ::= { sheMstpControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.10 sheMstpControlPortParamAdminPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyMstpPortParamEntry" ::= { sheMstpControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3 sheCist OBJECT IDENTIFIER ::= { sheMstpConfig 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1 sheCistBridgeProtoParam OBJECT IDENTIFIER ::= { sheCist 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.1 sheCistBridgeProtoParamBridgeId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address." ::= { sheCistBridgeProtoParam 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.2 sheCistBridgeProtoParamBridgePriority OBJECT-TYPE SYNTAX Unsigned32 (0..61440) MAX-ACCESS read-only STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability." ::= { sheCistBridgeProtoParam 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.3 sheCistBridgeProtoParamTcTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the last topology change." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3 " ::= { sheCistBridgeProtoParam 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.4 sheCistBridgeProtoParamTcCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized. " REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3 " ::= { sheCistBridgeProtoParam 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.5 sheCistBridgeProtoParamTc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A topology change has been detected." ::= { sheCistBridgeProtoParam 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.6 sheCistBridgeProtoParamDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1 " ::= { sheCistBridgeProtoParam 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.7 sheCistBridgeProtoParamRootPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3 " ::= { sheCistBridgeProtoParam 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.8 sheCistBridgeProtoParamRootPathCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch. " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2 " ::= { sheCistBridgeProtoParam 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.9 sheCistBridgeProtoParamMaxAge OBJECT-TYPE SYNTAX Unsigned32 (600..4000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum age of spanning tree protocol information learned from the network on any port before it is discarded (time a bridge port saves its configuration BPDU information), in units of hundredths of a second. This is the actual value that this bridge is currently using. This is 20 seconds by default and can be tuned to be between six and 40 seconds. " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4 " ::= { sheCistBridgeProtoParam 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.10 sheCistBridgeProtoParamHoldTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14 " ::= { sheCistBridgeProtoParam 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.11 sheCistBridgeProtoParamForwardDelay OBJECT-TYPE SYNTAX Unsigned32 (400..3000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6 " ::= { sheCistBridgeProtoParam 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.12 sheCistBridgeProtoParamBridgeMaxAge OBJECT-TYPE SYNTAX Unsigned32 (600..4000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root in units of hundredths of a second. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8 " DEFVAL { 2000 } ::= { sheCistBridgeProtoParam 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.13 sheCistBridgeProtoParamBridgeHelloTime OBJECT-TYPE SYNTAX Unsigned32 (100..1000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root in units of hundredths of a second. The hello time is the time between each Bridge Protocol Data Unit (BPDU) that is sent on a port. This is equal to two seconds by default, but can be tuned to be between one and ten seconds. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9 " DEFVAL { 200 } ::= { sheCistBridgeProtoParam 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.14 sheCistBridgeProtoParamBridgeForwardDelay OBJECT-TYPE SYNTAX Unsigned32 (400..3000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of BridgeMaxAge. This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10 " DEFVAL { 1500 } ::= { sheCistBridgeProtoParam 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.15 sheCistBridgeProtoParamForceVer OBJECT-TYPE SYNTAX SheCistBridgeProtoParamForceVerType MAX-ACCESS read-only STATUS current DESCRIPTION "When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation) or 3 (MSTP Compatibility)." ::= { sheCistBridgeProtoParam 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.16 sheCistBridgeProtoParamRegionalRootId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { sheCistBridgeProtoParam 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.17 sheCistBridgeProtoParamRegionalRootPathCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch." ::= { sheCistBridgeProtoParam 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.18 sheCistBridgeProtoParamMaxHops OBJECT-TYPE SYNTAX Integer32 (1..40) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of possible hops in the region. Only used if forcedVersion = mstp(3)." ::= { sheCistBridgeProtoParam 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.19 sheCistBridgeProtoParamSelfLoopDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable the stp self loop detection." ::= { sheCistBridgeProtoParam 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3 sheCistPortParamTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCistPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports." ::= { sheCist 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1 sheCistPortParamEntry OBJECT-TYPE SYNTAX SheCistPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports." INDEX { sheCistPortParamIndex } ::= { sheCistPortParamTable 1 } SheCistPortParamEntry ::= SEQUENCE { sheCistPortParamIndex Unsigned32, sheCistPortParamUpTime TimeTicks, sheCistPortParamState SheMstpPortParamStateType, sheCistPortParamPortId OCTET STRING, sheCistPortParamPortPriority Unsigned32, sheCistPortParamAdminPathCost Unsigned32, sheCistPortParamDesignatedRoot OCTET STRING, sheCistPortParamDesignatedCost Unsigned32, sheCistPortParamDesignatedBridge OCTET STRING, sheCistPortParamDesignatedPort OCTET STRING, sheCistPortParamTcAck TruthValue, sheCistPortParamAdminEdgePort TruthValue, sheCistPortParamOperEdgePort TruthValue, sheCistPortParamMacEnabled TruthValue, sheCistPortParamMacOperational TruthValue, sheCistPortParamAdminPointToPointMac SheCistAdminPTPMacType, sheCistPortParamOperPointToPointMac TruthValue, sheCistPortParamRegionalRootId OCTET STRING, sheCistPortParamRegionalRootPathCost Unsigned32, sheCistPortParamPortHelloTime Unsigned32, sheCistPortParamHelloTime Unsigned32, sheCistPortParamPortRole SheMstpPortParamPortRoleType, sheCistPortParamCurrentPathCost Unsigned32, sheCistPortParamLoopDetect TruthValue } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.1 sheCistPortParamIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "That is the sheBridgePortIndex of the corresponding BridgePort." ::= { sheCistPortParamEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.2 sheCistPortParamUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The total time the port was in the forwarding state since the management entity was last reset or initialized. " ::= { sheCistPortParamEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.3 sheCistPortParamState OBJECT-TYPE SYNTAX SheMstpPortParamStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Each Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port." ::= { sheCistPortParamEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.4 sheCistPortParamPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management." ::= { sheCistPortParamEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.5 sheCistPortParamPortPriority OBJECT-TYPE SYNTAX Unsigned32 (0..240) MAX-ACCESS read-only STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority." ::= { sheCistPortParamEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.6 sheCistPortParamAdminPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system." ::= { sheCistPortParamEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.7 sheCistPortParamDesignatedRoot OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "One switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." ::= { sheCistPortParamEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.8 sheCistPortParamDesignatedCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch." ::= { sheCistPortParamEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.9 sheCistPortParamDesignatedBridge OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "A designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port." ::= { sheCistPortParamEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.10 sheCistPortParamDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port identifier of the port that transmitted a BPDU to me." ::= { sheCistPortParamEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.11 sheCistPortParamTcAck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A boolean. Set if a Configuration Message with a topology change acknowledge flag set is to be transmitted." ::= { sheCistPortParamEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.12 sheCistPortParamAdminEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Port can be configured to be an edge port." ::= { sheCistPortParamEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.13 sheCistPortParamOperEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If port is configured to be an edge port, in the absence of a received BPDU, this port is identified as an operEdgePort." ::= { sheCistPortParamEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.14 sheCistPortParamMacEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE." ::= { sheCistPortParamEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.15 sheCistPortParamMacOperational OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this parameter is TRUE if the MAC entity is in a functioning state; i.e., the MAC entity can be used to transmit and/or receive frames, and its use is permitted by management. Its value is otherwise FALSE." ::= { sheCistPortParamEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.16 sheCistPortParamAdminPointToPointMac OBJECT-TYPE SYNTAX SheCistAdminPTPMacType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures." ::= { sheCistPortParamEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.17 sheCistPortParamOperPointToPointMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "TRUE, if the MAC is connected to a point-to-point LAN, otherwise FALSE." ::= { sheCistPortParamEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.18 sheCistPortParamRegionalRootId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The CIST Regional Root is the bridge of this region that has the lowest External Root Path Cost through a Boundary Port." ::= { sheCistPortParamEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.19 sheCistPortParamRegionalRootPathCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path cost to the CIST Regional Root, the bridge of this region that has the lowest External Root Path Cost through a Boundary Port." ::= { sheCistPortParamEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.20 sheCistPortParamPortHelloTime OBJECT-TYPE SYNTAX Unsigned32 (100..1000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The hello time actual used by that port. " DEFVAL { 200 } ::= { sheCistPortParamEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.21 sheCistPortParamHelloTime OBJECT-TYPE SYNTAX Unsigned32 (100..1000) UNITS "10 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between the generation of Configuration BPDUs by the Root." DEFVAL { 200 } ::= { sheCistPortParamEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.22 sheCistPortParamPortRole OBJECT-TYPE SYNTAX SheMstpPortParamPortRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "The RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology." ::= { sheCistPortParamEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.23 sheCistPortParamCurrentPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The current path cost" ::= { sheCistPortParamEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.24 sheCistPortParamLoopDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The current loop detect state. Note: Only supported by hix5608 R1.3!!" DEFVAL { false } ::= { sheCistPortParamEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4 sheCistControl OBJECT IDENTIFIER ::= { sheCist 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.1 sheCistControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. sheCistBridgeProtoParam - resetCistTc parameters: 'no' - modifyCistBridgeParameters parameters: sheCistControlBridgeProtoParamBridgePriority sheCistControlBridgeProtoParamBridgeMaxAge sheCistControlBridgeProtoParamBridgeHelloTime sheCistControlBridgeProtoParamBridgeForwardDelay sheCistControlBridgeProtoParamForceVer sheCistControlBridgeProtoParamMaxHops sheCistControlBridgeProtoParamSelfLoopDetect sheCistPortParamTable - modifyCistPortParamEntry parameters: sheCistControlPortParamIndex sheCistControlPortParamPortPriority sheCistControlPortParamAdminPathCost sheCistControlPortParamAdminEdgePort sheCistControlPortParamMacEnabled sheCistControlPortParamAdminPointToPointMac" ::= { sheCistControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.2 sheCistControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheCistControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.3 sheCistControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheCistControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.4 sheCistControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheCistControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.5 sheCistControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheCistControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.6 sheCistControlBridgeProtoParamBridgePriority OBJECT-TYPE SYNTAX Unsigned32 (0..61440) UNITS "multiple of 4096" MAX-ACCESS read-write STATUS current DESCRIPTION "Each switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. parameter for - modifyCistBridgeParameters" ::= { sheCistControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.7 sheCistControlBridgeProtoParamBridgeMaxAge OBJECT-TYPE SYNTAX Unsigned32 (600..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8 " ::= { sheCistControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.8 sheCistControlBridgeProtoParamBridgeHelloTime OBJECT-TYPE SYNTAX Unsigned32 (100..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9 " ::= { sheCistControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.9 sheCistControlBridgeProtoParamBridgeForwardDelay OBJECT-TYPE SYNTAX Unsigned32 (400..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParameters " REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10 " ::= { sheCistControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.10 sheCistControlBridgeProtoParamForceVer OBJECT-TYPE SYNTAX SheCistBridgeProtoParamForceVerType MAX-ACCESS read-write STATUS current DESCRIPTION "When RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation). Third version is Mstp compatibility. " ::= { sheCistControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.11 sheCistControlBridgeProtoParamMaxHops OBJECT-TYPE SYNTAX Integer32 (1..40) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of possible hops in the region. Only used if forcedVersion = mstp(3)." ::= { sheCistControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.12 sheCistControlBridgeProtoParamSelfLoopDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the stp self loop detection." ::= { sheCistControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.13 sheCistControlPortParamIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the sheCistPortParamTable entry to be modified. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.14 sheCistControlPortParamPortPriority OBJECT-TYPE SYNTAX Unsigned32 (0..240) UNITS "multiple of 16" MAX-ACCESS read-write STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.15 sheCistControlPortParamAdminPathCost OBJECT-TYPE SYNTAX Unsigned32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.16 sheCistControlPortParamAdminEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Port can be configured to be an edge port. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.17 sheCistControlPortParamMacEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.18 sheCistControlPortParamAdminPointToPointMac OBJECT-TYPE SYNTAX SheCistAdminPTPMacType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures. parameter for - modifyCistPortParamEntry" ::= { sheCistControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4 sheMstpNotifications OBJECT IDENTIFIER ::= { sheMstpConfig 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.1 sheMstpBaseConfigModified NOTIFICATION-TYPE OBJECTS { sheMstpBaseControlTimestamp, sheMstpBaseControlBaseStatus, sheMstpBaseRevisionLevel, sheMstpBaseConfName } STATUS current DESCRIPTION "MSTP base parameters has been modified." ::= { sheMstpNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.2 sheMstpBaseConfIdVlanIdListModified NOTIFICATION-TYPE OBJECTS { sheMstpControlTimestamp, sheMstpBaseConfIdVlanIdList } STATUS current DESCRIPTION "MSTP instance to VLAN ID mapping has been modified." ::= { sheMstpNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.3 sheMstpBridgeTcReset NOTIFICATION-TYPE OBJECTS { sheMstpControlTimestamp, sheMstpControlBridgeProtoParamIndex } STATUS current DESCRIPTION "Mstp topology change detection flag has been reset." ::= { sheMstpNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.4 sheMstpBridgeParamEntryModified NOTIFICATION-TYPE OBJECTS { sheMstpControlTimestamp, sheMstpControlBridgeProtoParamIndex, sheMstpBridgeProtoParamBridgePriority, sheMstpBridgeProtoParamBridgeId } STATUS current DESCRIPTION "Mstp bridge parameter entry has been modified." ::= { sheMstpNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.5 sheMstpPortParamEntryModified NOTIFICATION-TYPE OBJECTS { sheMstpControlTimestamp, sheMstpControlPortParamTableIndex, sheMstpPortParamAdminPathCost, sheMstpPortParamPortPriority, sheMstpPortParamPortId } STATUS current DESCRIPTION "Mstp port parameter entry has been modified." ::= { sheMstpNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.6 sheCistBridgeTcReset NOTIFICATION-TYPE OBJECTS { sheCistControlTimestamp } STATUS current DESCRIPTION "Cist topology change detection flag has been reset." ::= { sheMstpNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.7 sheCistBridgeParamModified NOTIFICATION-TYPE OBJECTS { sheCistControlTimestamp, sheCistBridgeProtoParamBridgePriority, sheCistBridgeProtoParamMaxAge, sheCistBridgeProtoParamBridgeHelloTime, sheCistBridgeProtoParamBridgeForwardDelay, sheCistBridgeProtoParamForceVer, sheCistBridgeProtoParamMaxHops, sheCistBridgeProtoParamSelfLoopDetect, sheCistBridgeProtoParamBridgeId } STATUS current DESCRIPTION "Cist bridge parameters have been modified." ::= { sheMstpNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.8 sheCistPortParamEntryModified NOTIFICATION-TYPE OBJECTS { sheCistControlPortParamIndex, sheCistControlTimestamp, sheCistPortParamPortPriority, sheCistPortParamAdminEdgePort, sheCistPortParamMacEnabled, sheCistPortParamAdminPointToPointMac, sheCistPortParamAdminPathCost, sheCistPortParamPortId } STATUS current DESCRIPTION "Cist port parameter entry has been modified." ::= { sheMstpNotifications 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.9 sheMstpPortBridgeGroupAddressChanged NOTIFICATION-TYPE OBJECTS { sheMstpPortControlPortIndex, sheMstpPortControlBridgeGroupAddress } STATUS current DESCRIPTION "MSTP's bridge group address has been changed." ::= { sheMstpNotifications 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.10 sheMstpBaseConfigReqResultTrap NOTIFICATION-TYPE OBJECTS { sheMstpBaseControlRequest, sheMstpBaseControlStatus, sheMstpBaseControlTimestamp, sheMstpBaseControlReqResult } STATUS current DESCRIPTION "Configuration end trap for long running commands." ::= { sheMstpNotifications 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.11 sheMstpControlReqResultTrap NOTIFICATION-TYPE OBJECTS { sheMstpControlRequest, sheMstpControlStatus, sheMstpControlTimestamp, sheMstpControlReqResult, sheMstpControlBridgeProtoParamIndex, sheMstpControlPortParamTableIndex } STATUS current DESCRIPTION "Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care." ::= { sheMstpNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.12 sheCistControlReqResultTrap NOTIFICATION-TYPE OBJECTS { sheCistControlRequest, sheCistControlStatus, sheCistControlTimestamp, sheCistControlReqResult, sheCistControlPortParamIndex } STATUS current DESCRIPTION "Configuration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care." ::= { sheMstpNotifications 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6 sheMstpPort OBJECT IDENTIFIER ::= { sheMstpConfig 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1 sheMstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sheMstpPortTable holds a parameter related to overall MSTP protocol such as Bridge Group Address per port. The key is a pointer to the port equal to sheBridgePortIndex. " ::= { sheMstpPort 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1 sheMstpPortEntry OBJECT-TYPE SYNTAX SheMstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the sheMstpPortTable. " INDEX { sheBridgePortIndex } ::= { sheMstpPortTable 1 } SheMstpPortEntry ::= SEQUENCE { sheMstpPortBridgeGroupAddress SheMstpPortControlBridgeGroupAddress } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1.1 sheMstpPortBridgeGroupAddress OBJECT-TYPE SYNTAX SheMstpPortControlBridgeGroupAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MSTP bridge group Address to be used for the port." ::= { sheMstpPortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2 sheMstpPortControl OBJECT IDENTIFIER ::= { sheMstpPort 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.1 sheMstpPortControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " setMstpPortBridgeGroupAddress : sheMstpPortControlPortIndex sheMstpPortControlBridgeGroupAddress " ::= { sheMstpPortControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.2 sheMstpPortControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a control request" ::= { sheMstpPortControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.3 sheMstpPortControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM." ::= { sheMstpPortControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.4 sheMstpPortControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheMstpPortControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.5 sheMstpPortControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheMstpPortControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.6 sheMstpPortControlPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object points to the sheBridgePortTable (same as sheBridgePortIndex)." ::= { sheMstpPortControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.7 sheMstpPortControlBridgeGroupAddress OBJECT-TYPE SYNTAX SheMstpPortControlBridgeGroupAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MSTP bridge group address to be used for the port." ::= { sheMstpPortControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5 sheMstpConformance OBJECT IDENTIFIER ::= { sheMstpConfig 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.1 sheMstpCompliances OBJECT IDENTIFIER ::= { sheMstpConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.1.1 -- this module -- this module sheMstpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheMstpBaseParamGroup, sheMstpBaseControlGroup, sheMstpBridgeParamGroup, sheMstpPortParamGroup, sheMstpControlGroup, sheCistBridgeParamGroup, sheCistPortParamGroup, sheCistControlGroup, sheMstpNotificationGroup } ::= { sheMstpCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2 sheMstpGroups OBJECT IDENTIFIER ::= { sheMstpConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.1 sheMstpBaseParamGroup OBJECT-GROUP OBJECTS { sheMstpBaseStatus, sheMstpBaseConfName, sheMstpBaseRevisionLevel, sheMstpBaseConfIdVlanIdList } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.2 sheMstpBaseControlGroup OBJECT-GROUP OBJECTS { sheMstpBaseControlRequest, sheMstpBaseControlStatus, sheMstpBaseControlTimestamp, sheMstpBaseControlReqResult, sheMstpBaseControlTimer, sheMstpBaseControlBaseStatus, sheMstpBaseControlConfName, sheMstpBaseControlRevisionLevel, sheMstpBaseControlConfIdVlanIdList } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.3 sheMstpBridgeParamGroup OBJECT-GROUP OBJECTS { sheMstpBridgeProtoParamIndex, sheMstpBridgeProtoParamBridgeId, sheMstpBridgeProtoParamBridgePriority, sheMstpBridgeProtoParamTcTime, sheMstpBridgeProtoParamTcCount, sheMstpBridgeProtoParamTc, sheMstpBridgeProtoParamDesignatedRoot, sheMstpBridgeProtoParamRootPort, sheMstpBridgeProtoParamRootPathCost } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.4 sheMstpPortParamGroup OBJECT-GROUP OBJECTS { sheMstpPortParamTableIndex, sheMstpPortParamProtoIndex, sheMstpPortParamPortIndex, sheMstpPortParamUpTime, sheMstpPortParamState, sheMstpPortParamPortId, sheMstpPortParamPortPriority, sheMstpPortParamDesignatedRoot, sheMstpPortParamDesignatedBridge, sheMstpPortParamDesignatedCost, sheMstpPortParamPortRole, sheMstpPortBridgeGroupAddress, sheMstpPortParamDesignatedPort, sheMstpPortParamAdminPathCost, sheMstpPortParamCurrentPathCost } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.5 sheMstpControlGroup OBJECT-GROUP OBJECTS { sheMstpControlRequest, sheMstpControlStatus, sheMstpControlTimestamp, sheMstpControlReqResult, sheMstpControlTimer, sheMstpControlBridgeProtoParamIndex, sheMstpControlBridgeProtoParamBridgePriority, sheMstpControlPortParamTableIndex, sheMstpControlPortParamPortPriority, sheMstpControlPortParamAdminPathCost, sheMstpPortControlRequest, sheMstpPortControlStatus, sheMstpPortControlTimer, sheMstpPortControlReqResult, sheMstpPortControlTimeStamp, sheMstpPortControlPortIndex, sheMstpPortControlBridgeGroupAddress } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.6 sheCistBridgeParamGroup OBJECT-GROUP OBJECTS { sheCistBridgeProtoParamBridgeId, sheCistBridgeProtoParamBridgePriority, sheCistBridgeProtoParamTcTime, sheCistBridgeProtoParamTcCount, sheCistBridgeProtoParamTc, sheCistBridgeProtoParamDesignatedRoot, sheCistBridgeProtoParamRootPort, sheCistBridgeProtoParamRootPathCost, sheCistBridgeProtoParamMaxAge, sheCistBridgeProtoParamHoldTime, sheCistBridgeProtoParamForwardDelay, sheCistBridgeProtoParamBridgeMaxAge, sheCistBridgeProtoParamBridgeHelloTime, sheCistBridgeProtoParamBridgeForwardDelay, sheCistBridgeProtoParamForceVer, sheCistBridgeProtoParamRegionalRootId, sheCistBridgeProtoParamRegionalRootPathCost, sheCistBridgeProtoParamMaxHops, sheCistBridgeProtoParamSelfLoopDetect } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.7 sheCistPortParamGroup OBJECT-GROUP OBJECTS { sheCistPortParamIndex, sheCistPortParamUpTime, sheCistPortParamState, sheCistPortParamPortId, sheCistPortParamDesignatedRoot, sheCistPortParamDesignatedCost, sheCistPortParamDesignatedBridge, sheCistPortParamTcAck, sheCistPortParamAdminEdgePort, sheCistPortParamOperEdgePort, sheCistPortParamMacEnabled, sheCistPortParamMacOperational, sheCistPortParamAdminPointToPointMac, sheCistPortParamOperPointToPointMac, sheCistPortParamRegionalRootId, sheCistPortParamRegionalRootPathCost, sheCistPortParamPortHelloTime, sheCistPortParamPortRole, sheCistPortParamDesignatedPort, sheCistPortParamLoopDetect, sheCistPortParamHelloTime, sheCistPortParamPortPriority, sheCistPortParamAdminPathCost, sheCistPortParamCurrentPathCost } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.8 sheCistControlGroup OBJECT-GROUP OBJECTS { sheCistControlTimestamp, sheCistControlReqResult, sheCistControlTimer, sheCistControlBridgeProtoParamBridgePriority, sheCistControlBridgeProtoParamBridgeMaxAge, sheCistControlBridgeProtoParamBridgeHelloTime, sheCistControlBridgeProtoParamBridgeForwardDelay, sheCistControlPortParamIndex, sheCistControlPortParamAdminEdgePort, sheCistControlPortParamMacEnabled, sheCistControlBridgeProtoParamForceVer, sheCistControlBridgeProtoParamMaxHops, sheCistControlBridgeProtoParamSelfLoopDetect, sheCistControlPortParamAdminPointToPointMac, sheCistControlRequest, sheCistControlStatus, sheCistControlPortParamPortPriority, sheCistControlPortParamAdminPathCost } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.11.5.2.9 sheMstpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMstpBaseConfigModified, sheMstpBaseConfIdVlanIdListModified, sheMstpBridgeTcReset, sheMstpBridgeParamEntryModified, sheMstpPortParamEntryModified, sheCistBridgeTcReset, sheCistBridgeParamModified, sheCistPortParamEntryModified, sheMstpBaseConfigReqResultTrap, sheMstpControlReqResultTrap, sheCistControlReqResultTrap, sheMstpPortBridgeGroupAddressChanged } STATUS current DESCRIPTION "Description." ::= { sheMstpGroups 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12 sheArp OBJECT IDENTIFIER ::= { sheBridgeMib 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.1 sheArpBase OBJECT IDENTIFIER ::= { sheArp 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.1.1 sheArpBroadcastFloodPermission OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-only STATUS current DESCRIPTION "That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) " DEFVAL { permit } ::= { sheArpBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2 sheArpControl OBJECT IDENTIFIER ::= { sheArp 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.1 sheArpControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. 801 - changeArpHandling parameters: sheArpControlBroadcastFloodPermission" ::= { sheArpControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.2 sheArpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheArpControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.3 sheArpControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheArpControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.4 sheArpControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheArpControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.5 sheArpControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheArpControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.6 sheArpControlBroadcastFloodPermission OBJECT-TYPE SYNTAX ShePermissionType MAX-ACCESS read-write STATUS current DESCRIPTION "That is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) Parameter for 801 - changeArpHandling" ::= { sheArpControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3 sheArpNotifications OBJECT IDENTIFIER ::= { sheArp 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.1 sheArpBroadcastFloodPermissionModified NOTIFICATION-TYPE OBJECTS { sheArpControlTimestamp, sheArpBroadcastFloodPermission } STATUS current DESCRIPTION "sheArpControlFloodPermission has been modified." ::= { sheArpNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.2 sheArpFixedIpAddressTableEntryCreated NOTIFICATION-TYPE OBJECTS { sheArpFixedIpAddressControlIndex, sheArpFixedIpAddressControlTimestamp, sheArpFixedIpAddressControlBridgePortIndex, sheArpFixedIpAddressControlAddress, sheArpFixedIpAddressControlInnerVlanTag, sheArpFixedIpAddressControlOuterVlanTag } STATUS current DESCRIPTION "sheArpFixedIpAddressTableEntry created." ::= { sheArpNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.3 sheArpFixedIpAddressTableEntryModified NOTIFICATION-TYPE OBJECTS { sheArpFixedIpAddressControlIndex, sheArpFixedIpAddressControlTimestamp, sheArpFixedIpAddressControlBridgePortIndex, sheArpFixedIpAddressControlAddress, sheArpFixedIpAddressControlInnerVlanTag, sheArpFixedIpAddressControlOuterVlanTag } STATUS current DESCRIPTION "sheArpFixedIpAddressTableEntry modified." ::= { sheArpNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.4 sheArpFixedIpAddressTableEntryDeleted NOTIFICATION-TYPE OBJECTS { sheArpFixedIpAddressControlIndex, sheArpFixedIpAddressControlTimestamp } STATUS current DESCRIPTION "sheArpFixedIpAddressTableEntry deleted." ::= { sheArpNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5 sheArpFixedIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SheArpFixedIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of fixed IP-Addresses for the ARP-Replay-Agent. There are two restrictions for the amount of possible IpAddresses on subscriber ports. One per bridgePort via sheBridgePortIpAddressPermitCount and one per UNI port via sheBridgeBaseMaxIpUNI parameter (global for NE), which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Note: Currently, the SHE system support only 1 fixed IP address configuration per Bridgeport. For that reason, the NE will always use the configured Bridgeport index also as selected value for the tableindex sheArpFixedIpAddressIndex. The number of fixed addresses could be expanded in future releases, but such changes maybe force an index change for this table." ::= { sheArp 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1 sheArpFixedIpAddressEntry OBJECT-TYPE SYNTAX SheArpFixedIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "On entry consist of an Index ,one configured IP-Address, the bridgePortIndex of the configured port and the assoiated learned mac-address. Index for the Entry are the sheArpFixedIpAddressIndex." INDEX { sheArpFixedIpAddressIndex } ::= { sheArpFixedIpAddressTable 1 } SheArpFixedIpAddressEntry ::= SEQUENCE { sheArpFixedIpAddressIndex Integer32, sheArpFixedIpAddressBridgePortIndex Integer32, sheArpFixedIpAddress OCTET STRING, sheArpFixedIpAddressLearnedMac OCTET STRING, sheArpFixedIpAntiSpoofingStatus SheArpFixedIpAntiSpoofingStatusType, sheArpFixedIpAddressInnerVlanTag Integer32, sheArpFixedIpAddressOuterVlanTag Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.1 sheArpFixedIpAddressIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A free running index for this table." ::= { sheArpFixedIpAddressEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.2 sheArpFixedIpAddressBridgePortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the bridgePort were this Ip-Address is configured for." ::= { sheArpFixedIpAddressEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.3 sheArpFixedIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A configured fixed ip-address. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. " ::= { sheArpFixedIpAddressEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.4 sheArpFixedIpAddressLearnedMac OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The learned mac-address for this ipAddress-entry." ::= { sheArpFixedIpAddressEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.5 sheArpFixedIpAntiSpoofingStatus OBJECT-TYPE SYNTAX SheArpFixedIpAntiSpoofingStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "0-inactive: IP Anti-spoofing Disabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful." ::= { sheArpFixedIpAddressEntry 5 } sheArpFixedIpAddressInnerVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The inner vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8." ::= { sheArpFixedIpAddressEntry 6 } sheArpFixedIpAddressOuterVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "The outer vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8." ::= { sheArpFixedIpAddressEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6 sheArpFixedIpAddressControl OBJECT IDENTIFIER ::= { sheArp 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.1 sheArpFixedIpAddressControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "A SetRequest on this attribute starts a command execution process in the NetElement. 802 - createArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 803 - modifyArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 804 - deleteArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex" ::= { sheArpFixedIpAddressControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.2 sheArpFixedIpAddressControlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the table-entry to be configured." ::= { sheArpFixedIpAddressControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.3 sheArpFixedIpAddressControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of command" ::= { sheArpFixedIpAddressControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.4 sheArpFixedIpAddressControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheArpFixedIpAddressControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.5 sheArpFixedIpAddressControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Command result (error code) attribute." ::= { sheArpFixedIpAddressControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.6 sheArpFixedIpAddressControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheArpFixedIpAddressControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.7 sheArpFixedIpAddressControlBridgePortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheArpFixedIpAddressControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.8 sheArpFixedIpAddressControlAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheArpFixedIpAddressControl 8 } sheArpFixedIpAddressControlInnerVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. New parameter with R2.8." ::= { sheArpFixedIpAddressControl 9 } sheArpFixedIpAddressControlOuterVlanTag OBJECT-TYPE SYNTAX Integer32 (0 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table. New parameter with R2.8." ::= { sheArpFixedIpAddressControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7 sheDhcpSnoop OBJECT IDENTIFIER ::= { sheArp 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1 sheDhcpSnoopingTable OBJECT-TYPE SYNTAX SEQUENCE OF SheDhcpSnoopingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "look at table." ::= { sheDhcpSnoop 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.1 sheDhcpSnoopingEntry OBJECT-TYPE SYNTAX SheDhcpSnoopingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry for every existing client for a bridgePort." INDEX { sheDhcpSnoopingBridgePortIndex, sheDhcpSnoopingIpAddress, sheDhcpSnoopingVlanId } ::= { sheDhcpSnoopingTable 1 } SheDhcpSnoopingEntry ::= SEQUENCE { sheDhcpSnoopingBridgePortIndex Integer32, sheDhcpSnoopingIpAddress IpAddress, sheDhcpSnoopingMacAddress OCTET STRING, sheDhcpSnoopingRemainingTime Integer32, sheIpAntiSpoofingStatus SheIpAntiSpoofingStatusType, sheDhcpSnoopingVlanId Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1 sheDhcpSnoopingBridgePortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "BridgePortIndex from bridgePortTable." ::= { sheDhcpSnoopingEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.2 sheDhcpSnoopingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A client-assigned IP address from Dhcp server" ::= { sheDhcpSnoopingEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.3 sheDhcpSnoopingMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A client's Mac address" ::= { sheDhcpSnoopingEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.4 sheDhcpSnoopingRemainingTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time until the lease time to the IP address is over" ::= { sheDhcpSnoopingEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.5 sheIpAntiSpoofingStatus OBJECT-TYPE SYNTAX SheIpAntiSpoofingStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "0-inactive: IP Anti-spoofing Diabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful." ::= { sheDhcpSnoopingEntry 5 } sheDhcpSnoopingVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "VlanIndex from VlanTable. This show which VLAN the client uses. " ::= { sheDhcpSnoopingEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2 sheDhcpSnoopControl OBJECT IDENTIFIER ::= { sheDhcpSnoop 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.1 sheDhcpSnoopControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " deleteSnoopEntry(706), - it deletes a DHCP Snoop Entry as an ADMIN account. parameters: sheDhcpSnoopControlRequest sheDhcpSnoopControlBridgePortIndex sheDhcpSnoopControlIpAddress sheDhcpSnoopControlVlanId ipAntiSpoofingSet(707), - it enables or diables an IP Anti-spoofing at NE. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlEnable ipAntiSpoofingGracePeriodSet(708) - it sets a grace period when enabling an IP Anti-Spoofing. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlGracePeriod " ::= { sheDhcpSnoopControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.2 sheDhcpSnoopControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sheDhcpSnoopControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.3 sheDhcpSnoopControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Wait time for the manager on long lasting commands" ::= { sheDhcpSnoopControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.4 sheDhcpSnoopControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command" ::= { sheDhcpSnoopControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.5 sheDhcpSnoopControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheDhcpSnoopControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.6 sheDhcpSnoopControlBridgePortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A BridgePort Index to delete from table." ::= { sheDhcpSnoopControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.7 sheDhcpSnoopControlIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the snoop entry to delete" ::= { sheDhcpSnoopControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.8 sheIpAntiSpoofingControlEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "True : Enable False : Disable Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration." ::= { sheDhcpSnoopControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.9 sheIpAntiSpoofingControlGracePeriod OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "sec" MAX-ACCESS read-write STATUS current DESCRIPTION "It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable. " ::= { sheDhcpSnoopControl 9 } sheDhcpSnoopControlVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "VlanIndex from VlanTable. This show which VLAN the client uses. " ::= { sheDhcpSnoopControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3 sheIpAntiSpoofingInfo OBJECT IDENTIFIER ::= { sheDhcpSnoop 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.1 sheIpAntiSpoofingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration enable/disable the IpAs feature for all subscriber ports of the NE. True : Enable False : Disable Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies. If this switch was enabled, only cards with convergate chipset will made check for the triple Ip-innerTag-OuterTag. Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration." DEFVAL { false } ::= { sheIpAntiSpoofingInfo 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.2 sheIpAntiSpoofingGracePeriod OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "It is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable. " ::= { sheIpAntiSpoofingInfo 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.3 sheIpAntiSpoofingRemainingTime OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "After user sets up an IP Anti-Spoofing, there is some interval until this function is actually adjusted to a LineCard. It is called GracePeriod. This attruibute indicates the remaining time of real adjustment. " ::= { sheIpAntiSpoofingInfo 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4 sheIpAntiSpoofingNotifications OBJECT IDENTIFIER ::= { sheDhcpSnoop 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1 sheIpAntiSpoofingEvents OBJECT IDENTIFIER ::= { sheIpAntiSpoofingNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.1 sheIpAntiSpoofingChanged NOTIFICATION-TYPE OBJECTS { sheIpAntiSpoofingControlEnable } STATUS current DESCRIPTION "It notifies that the Ip Anti-Spoofing setting is changed. If sheIpAntiSpoofingEnableis True, it indicates IP Anti-Spoofing Enable. If sheIpAntiSpoofingEnable is False, it means IP Anti-Spoofing Disable. " ::= { sheIpAntiSpoofingEvents 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.2 sheIpAntiSpoofingGracePeriodChanged NOTIFICATION-TYPE OBJECTS { sheIpAntiSpoofingControlGracePeriod } STATUS current DESCRIPTION "It notifies that GracePeriod of IpAnti-Spoofing is modified. " ::= { sheIpAntiSpoofingEvents 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.3 sheDhcpSnoopingEntryDeleted NOTIFICATION-TYPE OBJECTS { sheDhcpSnoopControlTimeStamp, sheDhcpSnoopControlBridgePortIndex, sheDhcpSnoopControlIpAddress, sheDhcpSnoopControlVlanId } STATUS current DESCRIPTION "It notifies that the requested DhcpSnooping Entry was deleted." ::= { sheIpAntiSpoofingEvents 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8 sheArpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheArpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describe an arp flood policy based on vlan." ::= { sheArp 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1 sheArpVlanEntry OBJECT-TYPE SYNTAX SheArpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of the table" INDEX { sheVlanIndex } ::= { sheArpVlanTable 1 } SheArpVlanEntry ::= SEQUENCE { sheArpVlanFloodFlag SheArpVlanFloodType } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1.1 sheArpVlanFloodFlag OBJECT-TYPE SYNTAX SheArpVlanFloodType MAX-ACCESS read-only STATUS current DESCRIPTION "arp forward policy flag." ::= { sheArpVlanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9 sheArpVlanControl OBJECT IDENTIFIER ::= { sheArp 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.1 sheArpVlanControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " command to control the sheArpVlanTable. the valid command should be: modifyArpVlanFlood(901): sheArpVlanControlVlanId sheArpVlanControlFloodFlag " ::= { sheArpVlanControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.2 sheArpVlanControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a control request." ::= { sheArpVlanControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.3 sheArpVlanControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE." ::= { sheArpVlanControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.4 sheArpVlanControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheArpVlanControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.5 sheArpVlanControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheArpVlanControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.6 sheArpVlanControlVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID which is controlled for ARP flooding." ::= { sheArpVlanControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.7 sheArpVlanControlFloodFlag OBJECT-TYPE SYNTAX SheArpVlanFloodType MAX-ACCESS read-write STATUS current DESCRIPTION "Arp foward policy. enable: flood ARP packets, disable: do not flood ARP packets" ::= { sheArpVlanControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.10 sheArpVlanNotifications OBJECT IDENTIFIER ::= { sheArp 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.10.1 sheArpVlanFloodModified NOTIFICATION-TYPE OBJECTS { sheArpVlanControlTimeStamp, sheArpVlanControlVlanId, sheArpVlanControlFloodFlag } STATUS current DESCRIPTION "ARP flooding policy for a VLAN has been modified." ::= { sheArpVlanNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4 sheArpConformance OBJECT IDENTIFIER ::= { sheArp 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.1 sheArpCompliances OBJECT IDENTIFIER ::= { sheArpConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.1.1 -- this module -- this module sheArpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the ARP MIB. " MODULE -- this module MANDATORY-GROUPS { sheArpBaseGroup, sheArpControlGroup, sheArpNotificationGroup, sheArpFixedIpAddressGroup, sheArpFixedIpAddressControlGroup, sheDhcpSnoopingGroup, sheDhcpSnoopingControlGroup, sheDhcpSnoopingNotificationGroup } ::= { sheArpCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2 sheArpGroups OBJECT IDENTIFIER ::= { sheArpConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2.1 sheArpBaseGroup OBJECT-GROUP OBJECTS { sheArpBroadcastFloodPermission, sheArpVlanFloodFlag } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2.2 sheArpControlGroup OBJECT-GROUP OBJECTS { sheArpControlRequest, sheArpControlStatus, sheArpControlTimestamp, sheArpControlReqResult, sheArpControlTimer, sheArpControlBroadcastFloodPermission, sheArpVlanControlRequest, sheArpVlanControlStatus, sheArpVlanControlTimer, sheArpVlanControlReqResult, sheArpVlanControlTimeStamp, sheArpVlanControlVlanId, sheArpVlanControlFloodFlag } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2.3 sheArpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheArpBroadcastFloodPermissionModified, sheArpFixedIpAddressTableEntryCreated, sheArpFixedIpAddressTableEntryModified, sheArpFixedIpAddressTableEntryDeleted, sheArpVlanFloodModified } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2.4 sheArpFixedIpAddressGroup OBJECT-GROUP OBJECTS { sheArpFixedIpAddressIndex, sheArpFixedIpAddressBridgePortIndex, sheArpFixedIpAddress, sheArpFixedIpAddressLearnedMac, sheArpFixedIpAntiSpoofingStatus, sheArpFixedIpAddressInnerVlanTag, sheArpFixedIpAddressOuterVlanTag } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.12.4.2.5 sheArpFixedIpAddressControlGroup OBJECT-GROUP OBJECTS { sheArpFixedIpAddressControlRequest, sheArpFixedIpAddressControlIndex, sheArpFixedIpAddressControlStatus, sheArpFixedIpAddressControlTimestamp, sheArpFixedIpAddressControlReqResult, sheArpFixedIpAddressControlTimer, sheArpFixedIpAddressControlBridgePortIndex, sheArpFixedIpAddressControlAddress, sheArpFixedIpAddressControlInnerVlanTag, sheArpFixedIpAddressControlOuterVlanTag } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 5 } sheDhcpSnoopingGroup OBJECT-GROUP OBJECTS { sheDhcpSnoopingBridgePortIndex, sheDhcpSnoopingIpAddress, sheDhcpSnoopingMacAddress, sheDhcpSnoopingRemainingTime, sheIpAntiSpoofingStatus, sheIpAntiSpoofingEnable, sheIpAntiSpoofingGracePeriod, sheIpAntiSpoofingRemainingTime, sheDhcpSnoopingVlanId } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 6 } sheDhcpSnoopingControlGroup OBJECT-GROUP OBJECTS { sheDhcpSnoopControlRequest, sheDhcpSnoopControlStatus, sheDhcpSnoopControlTimer, sheDhcpSnoopControlTimeStamp, sheDhcpSnoopControlReqResult, sheDhcpSnoopControlBridgePortIndex, sheDhcpSnoopControlIpAddress, sheIpAntiSpoofingControlEnable, sheIpAntiSpoofingControlGracePeriod, sheDhcpSnoopControlVlanId } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 7 } sheDhcpSnoopingNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheIpAntiSpoofingChanged, sheIpAntiSpoofingGracePeriodChanged, sheDhcpSnoopingEntryDeleted } STATUS current DESCRIPTION "Description." ::= { sheArpGroups 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13 sheQoSPm OBJECT IDENTIFIER ::= { sheBridgeMib 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1 sheQoSPmCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SheQoSPmCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The QoS Performance counter table." ::= { sheQoSPm 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1 sheQoSPmCounterEntry OBJECT-TYPE SYNTAX SheQoSPmCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table provides set of hw-packet counters for egrees direction. The given values represent the current queue fill levels. These table will be indeced by the ifIndex of the GE uplink. To get usefull results, the NE should support a reasonable priority to queue mapping." INDEX { ifIndex } ::= { sheQoSPmCounterTable 1 } SheQoSPmCounterEntry ::= SEQUENCE { sheQoSPacketCounterQueue1 Counter64, sheQoSPacketCounterQueue2 Counter64, sheQoSPacketCounterQueue3 Counter64, sheQoSPacketCounterQueue4 Counter64, sheQoSPacketCounterQueue5 Counter64, sheQoSPacketCounterQueue6 Counter64, sheQoSPacketCounterQueue7 Counter64, sheQoSPacketCounterQueue8 Counter64, sheQoSDroppedPacketCounter Counter64 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.1 sheQoSPacketCounterQueue1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.2 sheQoSPacketCounterQueue2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.3 sheQoSPacketCounterQueue3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.4 sheQoSPacketCounterQueue4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.5 sheQoSPacketCounterQueue5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.6 sheQoSPacketCounterQueue6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.7 sheQoSPacketCounterQueue7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.8 sheQoSPacketCounterQueue8 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of packets in the Queue." ::= { sheQoSPmCounterEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.9 sheQoSDroppedPacketCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Dropped packets per Interface." ::= { sheQoSPmCounterEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2 sheQoSPmControl OBJECT IDENTIFIER ::= { sheQoSPm 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.1 sheQoSPmControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "clearQosPmCounters: sheQoSPmControlIndex " ::= { sheQoSPmControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.2 sheQoSPmControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Value depends on the used ControlRequest." ::= { sheQoSPmControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.3 sheQoSPmControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. ." ::= { sheQoSPmControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.4 sheQoSPmControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheQoSPmControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.5 sheQoSPmControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheQoSPmControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.6 sheQoSPmControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheQoSPmControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.3 sheQoSPmNotifications OBJECT IDENTIFIER ::= { sheQoSPm 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.3.1 sheQoSPmCountersCleared NOTIFICATION-TYPE OBJECTS { sheQoSPmControlIndex, sheQoSPmControlTimeStamp } STATUS current DESCRIPTION "Counters cleared." ::= { sheQoSPmNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4 sheQoSPmConformance OBJECT IDENTIFIER ::= { sheQoSPm 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.1 sheQoSPmCompliances OBJECT IDENTIFIER ::= { sheQoSPmConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.1.1 -- this module -- this module sheQoSPmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheQoSPmGroup, sheQoSPmControlGroup, sheQoSPmNotificationsGroup } ::= { sheQoSPmCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.2 sheQoSPmGroups OBJECT IDENTIFIER ::= { sheQoSPmConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.2.1 sheQoSPmGroup OBJECT-GROUP OBJECTS { sheQoSPacketCounterQueue1, sheQoSPacketCounterQueue2, sheQoSPacketCounterQueue3, sheQoSPacketCounterQueue4, sheQoSPacketCounterQueue5, sheQoSPacketCounterQueue6, sheQoSPacketCounterQueue7, sheQoSPacketCounterQueue8, sheQoSDroppedPacketCounter } STATUS current DESCRIPTION "Description." ::= { sheQoSPmGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.2.2 sheQoSPmControlGroup OBJECT-GROUP OBJECTS { sheQoSPmControlRequest, sheQoSPmControlIndex, sheQoSPmControlStatus, sheQoSPmControlTimer, sheQoSPmControlReqResult, sheQoSPmControlTimeStamp } STATUS current DESCRIPTION "Description." ::= { sheQoSPmGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.13.4.2.3 sheQoSPmNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheQoSPmCountersCleared } STATUS current DESCRIPTION "Description." ::= { sheQoSPmGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14 sheUmas OBJECT IDENTIFIER ::= { sheBridgeMib 14 } -- -------------------------------------------- -- Bridge UMAS(Uplink MAC AntiSpoofing) Group -- -------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1 sheUmasBase OBJECT IDENTIFIER ::= { sheUmas 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.1 sheUmasUseDhcpNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Using the nexthop address of DHCP packet as a protected MAC address." ::= { sheUmasBase 1 } sheUmasBaseUsePppoeNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request)." ::= { sheUmasBase 2 } sheUmasBasePppoeAgingTime OBJECT-TYPE SYNTAX Unsigned32 (600..4294967295) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates time until the next-hop address of pppoe is deleted from umas table." DEFVAL { 3600 } ::= { sheUmasBase 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2 sheUmasTable OBJECT-TYPE SYNTAX SEQUENCE OF SheUmasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Uplink MAC antispoofing table." ::= { sheUmas 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1 sheUmasEntry OBJECT-TYPE SYNTAX SheUmasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Umas is an abbreviation for Uplink mac anti spoofing. This table contains a few entries for Uplink (Gateway, DHCP server, etc) Mac anti-spoofing function. 2 ways for that: specifying a static Mac address and automatically collecting Mac addresses to be protected." INDEX { sheUmasIndex } ::= { sheUmasTable 1 } SheUmasEntry ::= SEQUENCE { sheUmasIndex Integer32, sheUmasAddress OCTET STRING, sheUmasIsStatic TruthValue, sheUmasIsDhcpNextHop TruthValue, sheUmasIsPppoeNextHop TruthValue } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.1 sheUmasIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of Umas table." ::= { sheUmasEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.2 sheUmasAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address which is proctected." ::= { sheUmasEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.3 sheUmasIsStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this entry is static or not." ::= { sheUmasEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.4 sheUmasIsDhcpNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this address is the next hop address of DHCP packet." ::= { sheUmasEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.4 sheUmasIsPppoeNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this address is the next hop address of PPPoE packet." ::= { sheUmasEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3 sheUmasControl OBJECT IDENTIFIER ::= { sheUmas 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.1 sheUmasControlRequest OBJECT-TYPE SYNTAX SheUmasControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setUmasUseDhcpNextHop: sheUmasControlUseDhcpNextHop addUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr delUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr setUmasUsePppoeNextHop: sheUmasControlUsePppoeNextHop setUmasPppoeAgingTime: sheUmasControlPppoeAgingTime " ::= { sheUmasControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.2 sheUmasControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Status of command. If requestBusy a command is still ongoing and another command will be rejected." ::= { sheUmasControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.3 sheUmasControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheUmasControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.4 sheUmasControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheUmasControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.5 sheUmasControlReqResult OBJECT-TYPE SYNTAX SheUmasControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheUmasControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.6 sheUmasControlStaticAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The static MAC address which should be protected." ::= { sheUmasControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.7 sheUmasControlUseDhcpNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Using the nexthop address of DHCP packet as a protected MAC address." ::= { sheUmasControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.8 sheUmasControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index for controlrequest to identify the table entry." ::= { sheUmasControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.7 sheUmasControlUsePppoeNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request)." ::= { sheUmasControl 9 } sheUmasControlPppoeAgingTime OBJECT-TYPE SYNTAX Unsigned32 (600..4294967295) UNITS "sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates time until the next-hop address of pppoe is deleted from umas table." ::= { sheUmasControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4 sheUmasNotifications OBJECT IDENTIFIER ::= { sheUmas 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.1 sheUmasStaticAddrChanged NOTIFICATION-TYPE OBJECTS { sheUmasControlRequest, sheUmasControlStaticAddr, sheUmasControlIndex } STATUS current DESCRIPTION "Called after addUmasStaticAddr(102), delUmasStaticAddr(103) is requested for notification." ::= { sheUmasNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.2 sheUmasUseDhcpNextHopChanged NOTIFICATION-TYPE OBJECTS { sheUmasControlUseDhcpNextHop } STATUS current DESCRIPTION "Called after setUmasUseDhcpNextHop (101) is requested for notification." ::= { sheUmasNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.3 sheUmasUsePppoeNextHopChanged NOTIFICATION-TYPE OBJECTS { sheUmasControlUsePppoeNextHop } STATUS current DESCRIPTION "Called after setUmasUsePppoeNextHop (104) is requested for notification." ::= { sheUmasNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.4 sheUmasPppoeAgingTimeChanged NOTIFICATION-TYPE OBJECTS { sheUmasControlPppoeAgingTime } STATUS current DESCRIPTION "Called after setUmasPppoeAgingTime (105) is requested for notification." ::= { sheUmasNotifications 4 } sheUmasVlanEntryCreated NOTIFICATION-TYPE OBJECTS { sheUmasVlanControlTimestamp, sheUmasVlanControlVlanId } STATUS current DESCRIPTION "Configuration notification." ::= { sheUmasNotifications 5 } sheUmasVlanEntryDeleted NOTIFICATION-TYPE OBJECTS { sheUmasVlanControlTimestamp, sheUmasVlanControlVlanId } STATUS current DESCRIPTION "Configuration notification." ::= { sheUmasNotifications 6 } sheUmasAlarms OBJECT IDENTIFIER ::= { sheUmasNotifications 10 } sheUmasIUBlacklistOverflow NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "UMAS blacklist overflow per card alarm. AlarmReportingSource -> entPhysicalIndex of card AlarmReportingSourceType -> physicalEntity New with R2.8 maintenance." ::= { sheUmasAlarms 1 } sheUmasVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheUmasVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CR#003659 - UMAS extension with R2.8 New with R2.8 maintenance." ::= { sheUmas 5 } sheUmasVlanEntry OBJECT-TYPE SYNTAX SheUmasVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contain all VLAN's for which dynamic UMAS should be supported. " INDEX { sheUmasVlanId } ::= { sheUmasVlanTable 1 } SheUmasVlanEntry ::= SEQUENCE { sheUmasVlanId INTEGER } sheUmasVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "A vlanid of which dynamic UMAS should be supported. " ::= { sheUmasVlanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6 sheUmasVlanControl OBJECT IDENTIFIER ::= { sheUmas 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.1 sheUmasVlanControlRequest OBJECT-TYPE SYNTAX SheUmasControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " createUmasVlanEntry (110): sheUmasVlanControlVlanId deleteUmasVlanEntry (111): sheUmasVlanControlVlanId " ::= { sheUmasVlanControl 1 } sheUmasVlanControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheUmasVlanControl 2 } sheUmasVlanControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheUmasVlanControl 3 } sheUmasVlanControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command." ::= { sheUmasVlanControl 4 } sheUmasVlanControlReqResult OBJECT-TYPE SYNTAX SheUmasControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheUmasVlanControl 5 } sheUmasVlanControlVlanId OBJECT-TYPE SYNTAX INTEGER (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Table index to create or delete." ::= { sheUmasVlanControl 6 } sheUmasConformance OBJECT IDENTIFIER ::= { sheUmas 100 } sheUmasCompliances OBJECT IDENTIFIER ::= { sheUmasConformance 1 } -- this module sheUmasCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheUmasGroup, sheUmasControlGroup, sheUmasNotificationGroup } ::= { sheUmasCompliances 1 } sheUmasGroups OBJECT IDENTIFIER ::= { sheUmasConformance 2 } sheUmasGroup OBJECT-GROUP OBJECTS { sheUmasUseDhcpNextHop, sheUmasIndex, sheUmasAddress, sheUmasIsStatic, sheUmasIsDhcpNextHop, sheUmasIsPppoeNextHop, sheUmasBaseUsePppoeNextHop, sheUmasBasePppoeAgingTime, sheUmasVlanId } STATUS current DESCRIPTION "Description." ::= { sheUmasGroups 1 } sheUmasControlGroup OBJECT-GROUP OBJECTS { sheUmasControlRequest, sheUmasControlStatus, sheUmasControlTimeStamp, sheUmasControlTimer, sheUmasControlReqResult, sheUmasControlStaticAddr, sheUmasControlUseDhcpNextHop, sheUmasControlIndex, sheUmasControlUsePppoeNextHop, sheUmasControlPppoeAgingTime, sheUmasVlanControlRequest, sheUmasVlanControlStatus, sheUmasVlanControlTimestamp, sheUmasVlanControlTimer, sheUmasVlanControlReqResult, sheUmasVlanControlVlanId } STATUS current DESCRIPTION "Description." ::= { sheUmasGroups 2 } sheUmasNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheUmasStaticAddrChanged, sheUmasUseDhcpNextHopChanged, sheUmasUsePppoeNextHopChanged, sheUmasPppoeAgingTimeChanged, sheUmasVlanEntryCreated, sheUmasVlanEntryDeleted, sheUmasIUBlacklistOverflow } STATUS current DESCRIPTION "Description." ::= { sheUmasGroups 3 } -- -------------------------------------------- -- CEBS(Carrier Ethernet Border Switch) Group -- -------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15 -- -- CEBS support by SHE system only if CXU types CXU_B, CXU_B1 or CXU_C are used! sheCebs OBJECT IDENTIFIER ::= { sheBridgeMib 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1 sheCebsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCebsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CEBS port table" ::= { sheCebs 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1 sheCebsPortEntry OBJECT-TYPE SYNTAX SheCebsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheCebsPortBridgePortIndex } ::= { sheCebsPortTable 1 } SheCebsPortEntry ::= SEQUENCE { sheCebsPortBridgePortIndex Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1.1 sheCebsPortBridgePortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for. If created, the CEBS state of this Bridgeport is enabled." ::= { sheCebsPortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2 sheCebsPortControl OBJECT IDENTIFIER ::= { sheCebs 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.1 sheCebsPortControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "950 - createCebsPortTableEntry Parameters : sheCebsControlBridgePortIndex 951 - deleteCebsPotyTableEntry Parameters : sheCebsControlBridgePortIndex " ::= { sheCebsPortControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.2 sheCebsPortControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "configuration control status" ::= { sheCebsPortControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.3 sheCebsPortControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheCebsPortControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.4 sheCebsPortControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheCebsPortControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.5 sheCebsPortControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command" ::= { sheCebsPortControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.6 sheCebsPortControlBridgePortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index to the sheBridgePortTable. Points to the Bridgeport were this configuration is made for. If configured, the cebs state of this Bridgeport is enabled." ::= { sheCebsPortControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3 sheCebsSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCebsSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CEBS subscriber table" ::= { sheCebs 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1 sheCebsSubscriberEntry OBJECT-TYPE SYNTAX SheCebsSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheCebsSubscriberIpAddress } ::= { sheCebsSubscriberTable 1 } SheCebsSubscriberEntry ::= SEQUENCE { sheCebsSubscriberIpAddress IpAddress, sheCebsSubscriberBridePortIndex Integer32, sheCebsSubscriberVlan Integer32, sheCebsSubscriberIsStatic TruthValue, sheCebsSubscriberIsDynamic TruthValue, sheCebsSubscriberOperState Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.1 sheCebsSubscriberIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subscriber IP address configured by DHCP or operator." ::= { sheCebsSubscriberEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.2 sheCebsSubscriberBridePortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the sheBridgePortTable. Points to the Bridgeport this configuration is made for." ::= { sheCebsSubscriberEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.3 sheCebsSubscriberVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan that subscriber uses." ::= { sheCebsSubscriberEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.4 sheCebsSubscriberIsStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this subscriber is created by operator command, sheArpFixedIpAddressControlRequest." ::= { sheCebsSubscriberEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.5 sheCebsSubscriberIsDynamic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this subscriber is created by DHCP." ::= { sheCebsSubscriberEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.6 sheCebsSubscriberOperState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state specifying whether the subscriber is able to get CEBS service. 1 : Down 2 : Up " ::= { sheCebsSubscriberEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4 sheCebsDhcpGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCebsDhcpGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CEBS Dhcp gateway table." ::= { sheCebs 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1 sheCebsDhcpGatewayEntry OBJECT-TYPE SYNTAX SheCebsDhcpGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheCebsDhcpGatewayUserVlan } ::= { sheCebsDhcpGatewayTable 1 } SheCebsDhcpGatewayEntry ::= SEQUENCE { sheCebsDhcpGatewayUserVlan Integer32, sheCebsDhcpGatewayIpAddress IpAddress } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.1 sheCebsDhcpGatewayUserVlan OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Subscriver vlan" ::= { sheCebsDhcpGatewayEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.2 sheCebsDhcpGatewayIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The dymamic IP address that a DHCP automatically sets as a gateway." ::= { sheCebsDhcpGatewayEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5 sheCebsStaticGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCebsStaticGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CEBS static gateway table" ::= { sheCebs 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1 sheCebsStaticGatewayEntry OBJECT-TYPE SYNTAX SheCebsStaticGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheCebsStaticGatewayUserVlan } ::= { sheCebsStaticGatewayTable 1 } SheCebsStaticGatewayEntry ::= SEQUENCE { sheCebsStaticGatewayUserVlan Integer32, sheCebsStaticGatewayIpAddress IpAddress } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.1 sheCebsStaticGatewayUserVlan OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-only STATUS current DESCRIPTION "Subscriver vlan" ::= { sheCebsStaticGatewayEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.2 sheCebsStaticGatewayIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically." ::= { sheCebsStaticGatewayEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6 sheCebsStaticGatewayControl OBJECT IDENTIFIER ::= { sheCebs 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.1 sheCebsStaticGatewayControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "952 - createCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 953 - modifyCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 954 - deleteCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan " ::= { sheCebsStaticGatewayControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.2 sheCebsStaticGatewayControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "configuration control status" ::= { sheCebsStaticGatewayControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.3 sheCebsStaticGatewayControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command" ::= { sheCebsStaticGatewayControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.4 sheCebsStaticGatewayControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheCebsStaticGatewayControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.5 sheCebsStaticGatewayControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command" ::= { sheCebsStaticGatewayControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.6 sheCebsStaticGatewayControlUserVlan OBJECT-TYPE SYNTAX Integer32 (1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Subscriver vlan" ::= { sheCebsStaticGatewayControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.7 sheCebsStaticGatewayControlIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically." ::= { sheCebsStaticGatewayControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7 sheCebsVirtualMacTable OBJECT-TYPE SYNTAX SEQUENCE OF SheCebsVirtualMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "cebs virtual mac table" ::= { sheCebs 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1 sheCebsVirtualMacEntry OBJECT-TYPE SYNTAX SheCebsVirtualMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheCebsVirtualMacEntPhysicalIndex } ::= { sheCebsVirtualMacTable 1 } SheCebsVirtualMacEntry ::= SEQUENCE { sheCebsVirtualMacAddress OCTET STRING, sheCebsVirtualMacType Integer32, sheCebsVirtualMacEntPhysicalIndex PhysicalIndex } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.1 sheCebsVirtualMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Mac address" ::= { sheCebsVirtualMacEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.2 sheCebsVirtualMacType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is a global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index. 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot. " ::= { sheCebsVirtualMacEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.3 sheCebsVirtualMacEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysical index of the card/rack that this virtual mac will be used. This is table index also!!" ::= { sheCebsVirtualMacEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8 sheCebsVirtualMacControl OBJECT IDENTIFIER ::= { sheCebs 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.1 sheCebsVirtualMacControlRequest OBJECT-TYPE SYNTAX SheBridgeControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "955 - createCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress sheCebsVirtualMacControlType SheCebsVirtualMacControlEntPhysicalIndex 956 - deleteCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress " ::= { sheCebsVirtualMacControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.2 sheCebsVirtualMacControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "configuration control status" ::= { sheCebsVirtualMacControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.3 sheCebsVirtualMacControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheCebsVirtualMacControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.4 sheCebsVirtualMacControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheCebsVirtualMacControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.5 sheCebsVirtualMacControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command" ::= { sheCebsVirtualMacControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.6 sheCebsVirtualMacControlAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Virtual mac address used during CEBS service" ::= { sheCebsVirtualMacControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.7 sheCebsVirtualMacControlType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot. " ::= { sheCebsVirtualMacControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.8 sheCebsVirtualMacControlEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The entPhysical index of the card/rack that this virtual mac will be used. Index of the table entry which should be modified." ::= { sheCebsVirtualMacControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9 sheCebsNotifications OBJECT IDENTIFIER ::= { sheCebs 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.1 sheCebsPortTableEntryCreated NOTIFICATION-TYPE OBJECTS { sheCebsPortControlTimestamp, sheCebsPortControlBridgePortIndex, sheCebsPortControlStatus } STATUS current DESCRIPTION "sheCebsPortTableEntry has been created." ::= { sheCebsNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.2 sheCebsPortTableEntryDeleted NOTIFICATION-TYPE OBJECTS { sheCebsPortControlBridgePortIndex, sheCebsPortControlTimestamp } STATUS current DESCRIPTION "sheCebsPortTableEntry has been deleted." ::= { sheCebsNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.3 sheCebsStaticGatewayTableEntryCreated NOTIFICATION-TYPE OBJECTS { sheCebsStaticGatewayControlTimestamp, sheCebsStaticGatewayControlUserVlan, sheCebsStaticGatewayControlIpAddress } STATUS current DESCRIPTION "sheCebsStaticGatewayTableEntry has been created." ::= { sheCebsNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.4 sheCebsStaticGatewayTableEntryModified NOTIFICATION-TYPE OBJECTS { sheCebsStaticGatewayControlTimestamp, sheCebsStaticGatewayControlUserVlan, sheCebsStaticGatewayControlIpAddress } STATUS current DESCRIPTION "sheCebsStaticGatewayTableEntry has been modified." ::= { sheCebsNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.5 sheCebsStaticGatewayTableEntryDeleted NOTIFICATION-TYPE OBJECTS { sheCebsStaticGatewayControlTimestamp, sheCebsStaticGatewayControlUserVlan } STATUS current DESCRIPTION "sheCebsStaticGatewayTableEntry has been deleted." ::= { sheCebsNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.6 sheCebsVirtualMacTableEntryCreated NOTIFICATION-TYPE OBJECTS { sheCebsVirtualMacControlTimestamp, sheCebsVirtualMacControlAddress, sheCebsVirtualMacControlEntPhysicalIndex } STATUS current DESCRIPTION "sheCebsPortTableEntry has been created." ::= { sheCebsNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.7 sheCebsVirtualMacTableEntryDeleted NOTIFICATION-TYPE OBJECTS { sheCebsVirtualMacControlTimestamp, sheCebsVirtualMacControlEntPhysicalIndex } STATUS current DESCRIPTION "sheCebsVirtualMacTableEntry has been deleted." ::= { sheCebsNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10 sheCebsConformance OBJECT IDENTIFIER ::= { sheCebs 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10.1 sheCebsCompliances OBJECT IDENTIFIER ::= { sheCebsConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10.1.1 -- this module -- this module sheCebsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheCebsGroup, sheCebsControlGroup, sheCebsNotificationsGroup } ::= { sheCebsCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10.2 sheCebsGroups OBJECT IDENTIFIER ::= { sheCebsConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10.2.1 sheCebsGroup OBJECT-GROUP OBJECTS { sheCebsPortBridgePortIndex, sheCebsSubscriberIpAddress, sheCebsSubscriberBridePortIndex, sheCebsSubscriberVlan, sheCebsSubscriberIsStatic, sheCebsSubscriberIsDynamic, sheCebsSubscriberOperState, sheCebsDhcpGatewayUserVlan, sheCebsDhcpGatewayIpAddress, sheCebsStaticGatewayUserVlan, sheCebsStaticGatewayIpAddress, sheCebsVirtualMacAddress, sheCebsVirtualMacType, sheCebsVirtualMacEntPhysicalIndex } STATUS current DESCRIPTION "Description." ::= { sheCebsGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.15.10.2.2 sheCebsControlGroup OBJECT-GROUP OBJECTS { sheCebsPortControlRequest, sheCebsPortControlStatus, sheCebsPortControlTimestamp, sheCebsPortControlReqResult, sheCebsPortControlTimer, sheCebsPortControlBridgePortIndex, sheCebsStaticGatewayControlRequest, sheCebsStaticGatewayControlStatus, sheCebsStaticGatewayControlTimestamp, sheCebsStaticGatewayControlReqResult, sheCebsStaticGatewayControlTimer, sheCebsStaticGatewayControlUserVlan, sheCebsStaticGatewayControlIpAddress, sheCebsVirtualMacControlRequest, sheCebsVirtualMacControlStatus, sheCebsVirtualMacControlTimestamp, sheCebsVirtualMacControlReqResult, sheCebsVirtualMacControlTimer, sheCebsVirtualMacControlAddress, sheCebsVirtualMacControlType, sheCebsVirtualMacControlEntPhysicalIndex } STATUS current DESCRIPTION "Description." ::= { sheCebsGroups 2 } sheCebsNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheCebsPortTableEntryCreated, sheCebsPortTableEntryDeleted, sheCebsStaticGatewayTableEntryCreated, sheCebsStaticGatewayTableEntryModified, sheCebsStaticGatewayTableEntryDeleted, sheCebsVirtualMacTableEntryCreated, sheCebsVirtualMacTableEntryDeleted } STATUS current DESCRIPTION "Description." ::= { sheCebsGroups 3 } -- -------------------------------------------- -- MAT(Mac Address Translation) Group -- -------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16 sheMat OBJECT IDENTIFIER ::= { sheBridgeMib 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.1 sheMatBase OBJECT IDENTIFIER ::= { sheMat 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.1.1 sheMatDslamId OBJECT-TYPE SYNTAX Integer32 (-1..524287) MAX-ACCESS read-only STATUS current DESCRIPTION "A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned. NOTE: A modified DSLAM ID need an IU reset for activation! " ::= { sheMatBase 1 } sheMatTranslationMode OBJECT-TYPE SYNTAX SheMatTranslationModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The attribute describes, which format for MAC address translation will be used. general structure: byte5-byte4-byte3-byte2-byte1-byte0 bit47 .........................bit0 world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. " ::= { sheMatBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2 -- This table will not longer supported with SHE R2.6. sheMatPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMatPortEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The MAT port table for enable/disable this feature on bridgePort base. NOTE: This table will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable. " ::= { sheMat 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1 sheMatPortEntry OBJECT-TYPE SYNTAX SheMatPortEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "table entry" INDEX { sheBridgePortIndex } ::= { sheMatPortTable 1 } SheMatPortEntry ::= SEQUENCE { sheMatPortEnable TruthValue } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1.1 sheMatPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Enable or disable the MAC address translation feature on bridgePort base. NOTE: This parameter will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable." ::= { sheMatPortEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3 sheMatTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAT table contain the translated MAT addresses and her original laerned value. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the BridgePortIndex, which is the first table index here. If a valid BridgePortIndex value was used, only the tableEntries with this BridgePortIndex as first key will be refreshed. If the BridgePortIndex is 0 or unknown the full table will be refreshed." ::= { sheMat 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1 sheMatEntry OBJECT-TYPE SYNTAX SheMatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table entry" INDEX { sheBridgePortIndex, sheVlanIndex, sheMatIndex } ::= { sheMatTable 1 } SheMatEntry ::= SEQUENCE { sheMatTranslatedMacAddress OCTET STRING, sheMatOriginalMacAddress OCTET STRING, sheMatIndex Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.1 sheMatTranslatedMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Translated MAC address" ::= { sheMatEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.2 sheMatOriginalMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "Original MAC address" ::= { sheMatEntry 2 } sheMatIndex OBJECT-TYPE SYNTAX Unsigned32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "This index is the new third index value for this table. " ::= { sheMatEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4 sheMatControl OBJECT IDENTIFIER ::= { sheMat 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.1 sheMatControlRequest OBJECT-TYPE SYNTAX SheMatControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setDslamId(100): sheMatControlDslamId setPortEnable(101): sheMatControlBridgePortIndex sheMatControlPortEnable setMatTranslationMode(102): sheMatControlTranslationMode NOTE: SheMatPortTable will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! Usecase setPortEnable(101) is not longer supported!! Release R2.8 will support a new port specific enable command via sheBridgePortTable! New with R2.8 maintenance: refreshMatTable (105): sheMatControlBridgePortIndex" ::= { sheMatControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.2 sheMatControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of a user command group, used for block commands while a command execution is in process. - Values : idle, busy, passed, failed - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at the end of a command " ::= { sheMatControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.3 sheMatControlTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp attribute set at the end of a command." ::= { sheMatControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.4 sheMatControlReqResult OBJECT-TYPE SYNTAX SheBridgeControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Result of the last command" ::= { sheMatControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.5 sheMatControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum command execution time (timeout) in seconds in case of a long running command" ::= { sheMatControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.6 sheMatControlDslamId OBJECT-TYPE SYNTAX Integer32 (-1..524287) MAX-ACCESS read-write STATUS current DESCRIPTION "A DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned." ::= { sheMatControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.7 sheMatControlBridgePortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "A bridge port index identifier" ::= { sheMatControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.8 sheMatControlPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Sets MAC address translation enable/disable. NOTE: This value will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!!" ::= { sheMatControl 8 } sheMatControlTranslationMode OBJECT-TYPE SYNTAX SheMatTranslationModeType MAX-ACCESS read-write STATUS current DESCRIPTION "The attribute descripes, which format for MAC address translation will be used. world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. " ::= { sheMatControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5 sheMatNotifications OBJECT IDENTIFIER ::= { sheMat 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.1 sheMatDslamIdChanged NOTIFICATION-TYPE OBJECTS { sheMatDslamId } STATUS current DESCRIPTION "sheMatDslamId has been changed." ::= { sheMatNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.2 sheMatPortEnableChanged NOTIFICATION-TYPE OBJECTS { sheMatPortEnable } STATUS obsolete DESCRIPTION "sheMatPortEnable has been changed." ::= { sheMatNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.1 sheMatTranslationModeChanged NOTIFICATION-TYPE OBJECTS { sheMatTranslationMode } STATUS current DESCRIPTION "sheMatTranslationMode has been changed." ::= { sheMatNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.4 sheMatTableUpdated NOTIFICATION-TYPE OBJECTS { sheMatControlTimestamp, sheMatControlBridgePortIndex, sheMatControlReqResult } STATUS current DESCRIPTION "MAT table update finished." ::= { sheMatNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6 sheMatConformance OBJECT IDENTIFIER ::= { sheMat 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6.1 sheMatCompliances OBJECT IDENTIFIER ::= { sheMatConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6.1.1 -- this module -- this module sheMatCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheMatGroup, sheMatControlGroup, sheMatNotificationsGroup } ::= { sheMatCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6.2 sheMatGroups OBJECT IDENTIFIER ::= { sheMatConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6.2.1 sheMatGroup OBJECT-GROUP OBJECTS { sheMatDslamId, sheMatTranslatedMacAddress, sheMatIndex, sheMatOriginalMacAddress, sheMatTranslationMode } STATUS current DESCRIPTION "Description." ::= { sheMatGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.4.16.6.2.2 sheMatControlGroup OBJECT-GROUP OBJECTS { sheMatControlRequest, sheMatControlStatus, sheMatControlTimestamp, sheMatControlReqResult, sheMatControlTimer, sheMatControlDslamId, sheMatControlBridgePortIndex, sheMatControlTranslationMode } STATUS current DESCRIPTION "Description." ::= { sheMatGroups 2 } sheMatNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMatDslamIdChanged, sheMatTranslationModeChanged, sheMatTableUpdated } STATUS current DESCRIPTION "Description." ::= { sheMatGroups 3 } sheMatObsoleteGroup OBJECT-GROUP OBJECTS { sheMatPortEnable, sheMatControlPortEnable } STATUS obsolete DESCRIPTION "Description." ::= { sheMatGroups 4 } sheMatObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMatPortEnableChanged } STATUS obsolete DESCRIPTION "Description." ::= { sheMatGroups 5 } END -- -- she-bridge-mib.mib --