SHE-BRIDGE-MIB :: sheRuleGenericNoMatchAction

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › SHE-BRIDGE-MIB › sheRuleGenericNoMatchAction

sheRuleGenericNoMatchAction

Module: SHE-BRIDGE-MIB

OID (symbolic): SHE-BRIDGE-MIB::sheRuleGenericNoMatchAction

OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57

Node type: OBJECT-TYPE

Type: SheRuleGenericActionType

Access: read-only

Description: Handle packet as follows if rule not match. - deny(0) Drops matching packets. Action parameter: none

- allow(1) Permits matching packets. Action parameter: none

- meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericNoMatchActionMeterIndex

- redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericNoMatchActionRedirPort

- mirror(4) Copies matching packets to mirror monitor port. Action parameter: none

- setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericNoMatchActionDscp

- setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleActionSetPrio

- changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericNoMatchActionSetTagPrio

- changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none

- setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericNoMatchActionIpPrecedence

- changeTosWithTagPrio(10) Action parameter: none

- rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericNoMatchActionRate

- changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleGenericNoMatchActionVlan

- copyToCpu(13) Copies matching frames to CPU port. Action parameter: none

- count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded.

- untag (15) untag the frame

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57
snmpwalk -v2c -c public <target> SHE-BRIDGE-MIB::sheRuleGenericNoMatchAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57.1
snmpget -v2c -c public <target> SHE-BRIDGE-MIB::sheRuleGenericNoMatchAction.1

Start monitoring Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-BRIDGE-MIB::sheRuleGenericNoMatchAction OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.7siemensUnitsAN-MIB
1.3.6.1.4.1.231.7.1oenProductMibsAN-MIB
1.3.6.1.4.1.231.7.1.2anAN-MIB
1.3.6.1.4.1.231.7.1.2.2ppeAN-SHE-MIB
1.3.6.1.4.1.231.7.1.2.2.1sheAN-SHE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.7.1.2.2.1.4sheBridgeMibSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.3sheRulesAndMeteringSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.3.1sheRuleTableSHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1sheRuleEntrySHE-BRIDGE-MIB
1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57sheRuleGenericNoMatchActionSHE-BRIDGE-MIB