All MIBs › SHE-BRIDGE-MIB › sheDhcpRelayAdminState
sheDhcpRelayAdminState
Module: SHE-BRIDGE-MIB
OID (symbolic): SHE-BRIDGE-MIB::sheDhcpRelayAdminState
OID (numeric): 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1
Node type: OBJECT-TYPE
Type: SheDhcpRelayAdminStateType
Access: read-only
Description: Globaly enable/disable of Dhcp/PPPoE agent.
Telegram handling for DHCP and PPPoE
relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded (currently NO support)
handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop
valid values: up(1), -> releases >= R2.5 run now dhcpPppoeRelayRelay mode down(2), -> releases >= R2.5 run now dhcpPppoeSnoopSnoop mode
dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), (currently NO support) dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), (currently NO support) dhcpPppoeBridgeRelay(10),(currently NO support) dhcpPppoeBridgeSnoop(11),(currently NO support) dhcpPppoeBridgeBridge(12)(currently NO support)
NOTE: Only release R2.5 and higher can accept new value's 4..12 depending on the state of implementation in NE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1 snmpwalk -v2c -c public <target> SHE-BRIDGE-MIB::sheDhcpRelayAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1.1 snmpget -v2c -c public <target> SHE-BRIDGE-MIB::sheDhcpRelayAdminState.1
Start monitoring Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SHE-BRIDGE-MIB::sheDhcpRelayAdminState OID value, configure state conditions and alerts, and monitor any Nokia Siemens Networks hiX-series DSLAM access node (bridge-port VLAN/MSTP/LAG/QoS status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.7 | siemensUnits | AN-MIB |
| 1.3.6.1.4.1.231.7.1 | oenProductMibs | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2 | an | AN-MIB |
| 1.3.6.1.4.1.231.7.1.2.2 | ppe | AN-SHE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1 | she | AN-SHE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.2.1.4 | sheBridgeMib | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.6 | sheDhcpRelay | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1 | sheDhcpBase | SHE-BRIDGE-MIB |
| 1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1 | sheDhcpRelayAdminState | SHE-BRIDGE-MIB |