PT-SFP-MIB

All MIBs › PT-SFP-MIB

Organization: Ericsson

Last Updated: 2016-05-22

Category: Physical Layer and Interfaces, Wireless and Radio

Description: Manages Ericsson MINI-LINK SFP transceiver module identification, optical power levels, and diagnostic parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PT-SFP-MIB?

PT-SFP-MIB is an Ericsson proprietary MIB reporting SFP transceiver inventory per SFF-8472 (the industry-standard digital-diagnostic-monitoring EEPROM format) on Ericsson PT (packet transport) equipment. Its SFP table, tied into the standard ENTITY-MIB physical index, records install state, vendor name/OUI/part-number/revision/serial-number, and a saleable-entity code identifying the Ericsson-branded ordering code for that optic. As a hardware-inventory MIB it lets an administrator confirm exactly which SFP vendor and part number is installed in each slot, useful for compatibility auditing. It is deployed on Ericsson PT packet transport equipment. Engineers can download the PT-SFP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PT-SFP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson PT (packet transport) equipment

Monitoring Examples

An administrator checks vendorPn and saleableEntityCode for an installed SFP to confirm it's an Ericsson-qualified optic before troubleshooting a reported compatibility warning on that port.

What Can Be Monitored

installed SFP vendor/part-number inventory (SFF-8472)

Imported Objects

From ENTITY-MIB

entPhysicalEntry

OBJECT-TYPE

From PT-MIB

pt	MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ptSFP	1.3.6.1.4.1.193.223.2.6			This is the MIB of PT SFP specifics. Most entries are read from the SFP itself according to SFF-8472
ptSFPTable	1.3.6.1.4.1.193.223.2.6.1		not-accessible	An table of SFP Table entries.
ptSFPEntry	1.3.6.1.4.1.193.223.2.6.1.1		not-accessible	An entry of PT SFP application.
NUM installedSFP	1.3.6.1.4.1.193.223.2.6.1.1.1	PortInterfaceTC	read-only	Type of the inserted module, see textual convention
INS installState	1.3.6.1.4.1.193.223.2.6.1.1.2	InstallStateTC	read-only	Status of the inserted module, see textual convention
OCT vendorName	1.3.6.1.4.1.193.223.2.6.1.1.3	OCTET STRING	read-only	SFP vendor name as reported by the SFP
I32 vendorOui	1.3.6.1.4.1.193.223.2.6.1.1.4	Integer32	read-only	SFP vendor IEEE company ID as reported by the SFP
OCT vendorPn	1.3.6.1.4.1.193.223.2.6.1.1.5	OCTET STRING	read-only	Part number provided by SFP vendor (ASCII) as reported by the SFP
OCT vendorRev	1.3.6.1.4.1.193.223.2.6.1.1.6	OCTET STRING	read-only	Revision level for part number provided by vendor (ASCII) as reported by the SFP
OCT vendorSn	1.3.6.1.4.1.193.223.2.6.1.1.7	OCTET STRING	read-only	Serial number provided by vendor (ASCII) as reported by the SFP
OCT saleableEntityCode	1.3.6.1.4.1.193.223.2.6.1.1.8	OCTET STRING	read-only	Propriety product name as reported by the SFP's Vendor Specific EEPROM
CON connectorType	1.3.6.1.4.1.193.223.2.6.1.1.9	ConnectorTypeTC	read-only	An integer which indicates the type of CONNECTOR_TYPE according SFF-8024. See also textual convention
WAV installedWavelength	1.3.6.1.4.1.193.223.2.6.1.1.10	WaveLengthTC	read-only	An integer that in case of an optical SFP, is the laser wavelength in nm. See also textual convention.
I32 levelRx	1.3.6.1.4.1.193.223.2.6.1.1.11	Integer32	read-only	The input level in dBm (optical interfaces only). The value is an offset. The value 100 represents 0 dBm. The value 50 represents no signal.
OCT rxPower	1.3.6.1.4.1.193.223.2.6.1.1.12	OCTET STRING	read-only	The received light power, in dBm.
OCT txPower	1.3.6.1.4.1.193.223.2.6.1.1.13	OCTET STRING	read-only	The transmit light power, in dBm.
I32 brNominal	1.3.6.1.4.1.193.223.2.6.1.1.14	Integer32	read-only	The nominal bit rate, in units of 100 Mbps.
I32 length9m1km	1.3.6.1.4.1.193.223.2.6.1.1.15	Integer32	read-only	Link length supported for 9/125 um single fiber, units of 1 km
I32 length9m100m	1.3.6.1.4.1.193.223.2.6.1.1.16	Integer32	read-only	Link length supported for 9/125 um single fiber, units of 100 m
I32 length50m10m	1.3.6.1.4.1.193.223.2.6.1.1.17	Integer32	read-only	Link length supported for 50/125 um OM2 fiber, units of 10 m
I32 length62m10m	1.3.6.1.4.1.193.223.2.6.1.1.18	Integer32	read-only	Link length supported for 62.5/125 um OM1 fiber, units of 10 m
I32 lengthCopper1m	1.3.6.1.4.1.193.223.2.6.1.1.19	Integer32	read-only	Link length supported for copper or direct attach cable, units of m
OCT temperature	1.3.6.1.4.1.193.223.2.6.1.1.20	OCTET STRING	read-only	The SFP module temperature, in degree Celsius
OCT vcc	1.3.6.1.4.1.193.223.2.6.1.1.21	OCTET STRING	read-only	The supply voltage of the interface module, in V.
OCT biasCurrent	1.3.6.1.4.1.193.223.2.6.1.1.22	OCTET STRING	read-only	The bias current of the interface module, in mA.
ptSFPConformance	1.3.6.1.4.1.193.223.2.6.2
ptSFPCompliances	1.3.6.1.4.1.193.223.2.6.2.1
ptSFPFullCompliance	1.3.6.1.4.1.193.223.2.6.2.1.1			The compliance statement for SNMP entities which implement everything.
ptSFPGroups	1.3.6.1.4.1.193.223.2.6.2.2
ptSFPCompleteGroup	1.3.6.1.4.1.193.223.2.6.2.2.1			A collection of all current objects in this MIB module.

RFC description

Monitors SFP (Small Form-factor Pluggable) transceiver specifications and port interface types per SFF-8472.

Start monitoring Ericsson PT (packet transport) equipment (SFP transceiver inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PT-SFP-MIB

What Is PT-SFP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description