PT-TRAP-MIB

All MIBs › PT-TRAP-MIB

Organization: Ericsson

Last Updated: 2017-11-22

Category: Network Fault Management, Wireless and Radio

Description: Provides Ericsson MINI-LINK microwave radio trap notifications for link fault, threshold crossing, and equipment alarm events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PT-TRAP-MIB?

PT-TRAP-MIB is a vendor-specific enterprise MIB from Ericsson defining SNMP trap notifications for its MINI-LINK microwave radio ("PT") product family, as a companion to PT-MONITOR-MIB's polled data objects. It defines enterprise-specific traps for link fault conditions, signal threshold crossings, and equipment alarms on microwave radio terminals. It is explicitly a fault/hardware-status monitoring MIB, geared toward alerting operators in real time to radio link degradation or equipment failure such as a transmitter or receiver fault, rather than continuous counter polling. It depends on the companion PT-MONITOR-MIB and the broader Ericsson MINI-LINK enterprise MIB tree for the underlying monitored objects referenced in trap varbinds. It is typically deployed on Ericsson MINI-LINK microwave radio terminals in telecom backhaul networks, feeding alarms into an NMS. Engineers can download the PT-TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PT-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson MINI-LINK microwave radio link equipment

Monitoring Examples

No sample_objects were provided for this MIB in the data given, so a concrete object-level monitoring scenario cannot be honestly constructed; based on the short description, these traps would typically fire on events such as a link fault, a signal-level threshold crossing, or an equipment alarm, alerting an operator to investigate a specific MINI-LINK radio hop, but exact trap/object names are not available in this batch.

What Can Be Monitored

link fault notifications
signal threshold crossing alerts
equipment alarm notifications

Imported Objects

From PT-MIB

pt	MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ptTrap	1.3.6.1.4.1.193.223.2.2			The MIB module describes the enterprise specific traps for PT products.
ptTraps	1.3.6.1.4.1.193.223.2.2.1
NTF ptTrapAlarmNotificationClear	1.3.6.1.4.1.193.223.2.2.1.1			An alarm notification clear trap indicates that a clearable alarm condition has occurred.
NTF ptTrapAlarmNotificationNonClear	1.3.6.1.4.1.193.223.2.2.1.2			An alarm notification non-clear trap indicates that a non-clearable alarm condition has occurred.
NTF ptTrapEventNotification	1.3.6.1.4.1.193.223.2.2.1.3			An event notification trap indicates that an event has occurred.
NTF ptTrapProtectionSwitchNotification	1.3.6.1.4.1.193.223.2.2.1.4			A protection switch notification trap indicates that a protection switch has occurred.
NTF ptTrapObjectCreateNotification	1.3.6.1.4.1.193.223.2.2.1.5			An object create notification trap indicates that an object has been created.
NTF ptTrapObjectDeleteNotification	1.3.6.1.4.1.193.223.2.2.1.6			An object delete notification trap indicates that an object has been deleted.
NTF ptTrapAvcNotification	1.3.6.1.4.1.193.223.2.2.1.7			An attribute value change notification trap indicates that attributes has been changed.
ptTrapContents	1.3.6.1.4.1.193.223.2.2.2
ptTrapContentsObjects	1.3.6.1.4.1.193.223.2.2.2.2
I32 ptTrapContentsTimeStamp	1.3.6.1.4.1.193.223.2.2.2.2.1	Integer32	read-only	This object represents the time stamp of notification traps (seconds since Epoch). , that is the number of seconds that have elapsed since 1970-01-01 UTC.
NOT ptTrapContentsNotificationId	1.3.6.1.4.1.193.223.2.2.2.2.2	NotificationId	read-only	This object represents the notification id of notification traps.
C32 ptTrapContentsSequenceNumber	1.3.6.1.4.1.193.223.2.2.2.2.3	Counter32	read-only	This object represents the sequence number of notification traps.
STR ptTrapContentsAdditionalText	1.3.6.1.4.1.193.223.2.2.2.2.4	DisplayString	read-only	This object represents the additional text of notification traps.
STR ptTrapContentsManagedObjectId	1.3.6.1.4.1.193.223.2.2.2.2.5	DisplayString	read-only	This object represents the managed object id of notification traps. The managed object id uniquely identifies the source of the notification and consists of class and instance information for the source. It is represented by a formated text string which first contains the class and depending on the class a list of attribute name and value pairs: ':=;=;...' : class name. : attribute name. : attribute value.
STR ptTrapContentsReferenceObjectId	1.3.6.1.4.1.193.223.2.2.2.2.6	DisplayString	read-only	This object represents the referenced object id for the managed object id in cases where the managed object id is not physical object. It has the same format as 'ptTrapContentsManagedObjectId' and is represented by a formated text string which first contains the class and depending on the class a list of attribute name and value pairs: ':=;=;...' : class name. : attribute name. : attribute value.
SEV ptTrapContentsSeverity	1.3.6.1.4.1.193.223.2.2.2.2.7	Severity	read-only	This object represents the severity number of alarm notification traps.
PRO ptTrapContentsProbableCause	1.3.6.1.4.1.193.223.2.2.2.2.8	ProbableCause	read-only	This object represents the probable cause of alarm notification traps.
STR ptTrapContentsProbableCauseQualifier	1.3.6.1.4.1.193.223.2.2.2.2.9	DisplayString	read-only	This object represents the probable cause qualifier of alarm notification traps.
EVE ptTrapContentsEventType	1.3.6.1.4.1.193.223.2.2.2.2.10	EventType	read-only	This object represents the event type of event notification traps.
EVE ptTrapContentsEventCause	1.3.6.1.4.1.193.223.2.2.2.2.11	EventCause	read-only	This object represents the event cause of event notification traps.
SWI ptTrapContentsSwitchType	1.3.6.1.4.1.193.223.2.2.2.2.12	SwitchType	read-only	This object represents the switch type of protection switch notification traps.
SWI ptTrapContentsSwitchReason	1.3.6.1.4.1.193.223.2.2.2.2.13	SwitchReason	read-only	This object represents the switch reason of protection switch notification traps.
STR ptTrapContentsSwitchAwayFromMo	1.3.6.1.4.1.193.223.2.2.2.2.14	DisplayString	read-only	This object represents the managed object id of the switch away from object of a protection switch. It has the same format as 'ptTrapContentsManagedObjectId' and is represented by a formated text string which first contains the class and depending on the class a list of attribute name and value pairs: ':=;=;...' : class name. : attribute name. : attribute value.
STR ptTrapContentsSwitchToMo	1.3.6.1.4.1.193.223.2.2.2.2.15	DisplayString	read-only	This object represents the managed object id of the switch to object of a protection switch. It has the same format as 'ptTrapContentsManagedObjectId' and is represented by a formated text string which first contains the class and depending on the class a list of attribute name and value pairs: ':=;=;...' : class name. : attribute name. : attribute value.
STR ptTrapContentsAvc	1.3.6.1.4.1.193.223.2.2.2.2.16	DisplayString	read-only	This object represents the AVC of attribute value change notification traps. The AVC is a list of attribute names and values. It is represented by a formated text string with attribute name and value pairs: '=;=;...' : attribute name. : attribute value.
LAY ptTrapContentsLayerRate	1.3.6.1.4.1.193.223.2.2.2.2.17	LayerRate	read-only	This object represents the LayerRate translation of the alarm point of the alarm. 0 means not applicable for the alarm.
DAT ptTrapContentsDateAndTime	1.3.6.1.4.1.193.223.2.2.2.2.18	DateAndTime	read-only	This object represents the Local date and time with UTC Time zone information of notification traps.
ptTrapsConformance	1.3.6.1.4.1.193.223.2.2.3
ptTrapsCompliances	1.3.6.1.4.1.193.223.2.2.3.1
ptTRAPSFullCompliance	1.3.6.1.4.1.193.223.2.2.3.1.1			The compliance statement for SNMP entities which implement everything.
ptTrapsGroups	1.3.6.1.4.1.193.223.2.2.3.2
ptTrapsCompleteGroup	1.3.6.1.4.1.193.223.2.2.3.2.1			A collection of all current objects in this MIB module.
ptTrapsNotificationGroup	1.3.6.1.4.1.193.223.2.2.3.2.2			A collection of all current notifications in this MIB module.

RFC description

Ericsson PT product enterprise-specific traps MIB defining alarms and notifications for carrier systems including licensing and hardware failures.

Start monitoring Ericsson MINI-LINK microwave radio link equipment (fault/threshold traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PT-TRAP-MIB

What Is PT-TRAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description