| OID symbolic | OID numeric | Type | Access | Description |
|---|
| pdnBridgeExtMIB | 1.3.6.1.4.1.1795.2.24.2.58 | | | This MIB module provides objects that extend the
BRIDGE-MIB.
====================================================
== ==
== Copyright (C) 2005 Zhone Technologies, Inc ==
== ==
==================================================== |
| pdnBridgeExtNotifications | 1.3.6.1.4.1.1795.2.24.2.58.0 | | | |
| pdnBridgeExtObjects | 1.3.6.1.4.1.1795.2.24.2.58.1 | | | |
| pdnDot1dBasePortExtTable | 1.3.6.1.4.1.1795.2.24.2.58.1.1 | | not-accessible | Extends the dot1dBasePortTable in the BRIDGE-MIB. |
| pdnDot1dBasePortExtEntry | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1 | | not-accessible | An entry in the dot1dBasePortTable Table. |
| I32 pdnDot1dBasePortMaxFdbEntries | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.1 | Integer32 | read-write | This object configures the maximum number of entries
in the bridge port's Forwarding Database. The value
`0' is a special case that indicates that there is
no limit to the number of entries in the database. |
| INT pdnDot1dBasePortRole | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.2 | INTEGER | read-write | This object defines the role of a bridge port.
The role on a bridge port role can be defined as
subscriber or network as follows:
Subscriber:
----------
A port on the IP DSLAM or Aggregator that faces toward
or directly connects to a DSL interface on which an end
user (subscriber) would be located.
This would typically be the DSL ports directly on a unit
or the ports on an aggregator that connect to another DSLAM.
Network:
-------
A Port that connects to the service providers network,
aggregation device or to a shared resource such as a server. |
| INT pdnDot1dBasePortUnknownMulticastForwardingMode | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.3 | INTEGER | read-write | Configures the layer 2 unknown multicast forwarding
mode. A layer 2 frame is `unknown' if there is no
entry in the Forwarding Database which identifies
the set of ports to forward the multicast frame on.
When set to `flood(1)', the `unknown' multicast frame
will be forwarded on all bridge ports. When set to
`drop(2)', the `unknown' multicast frame will be
dropped and not be forwarded on any bridge port. |
| I32 pdnDot1dBasePortOuterTag | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.4 | Integer32 | read-write | When VLAN stacking (Q in Q) is desired for untagged
packets on a port, this object contains the value
of the outer 802.1q VLAN outer tag. A value of
zero (0) indicates that VLAN stacking is not enabled. |
| I32 pdnDot1dBasePortOuterPriority | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.5 | Integer32 | read-write | When VLAN stacking (Q in Q) is desired for untagged
packets on a port, this object contains the value
of the priority bits in the 802.1q VLAN outer tag.
If pdnDot1dBasePortOuterTag (above) is zero (0) this
object is ignored. |
| I32 pdnDot1dBasePortOuterEthertype | 1.3.6.1.4.1.1795.2.24.2.58.1.1.1.6 | Integer32 | read-write | When VLAN stacking (Q in Q) is desired for untagged
packets on a port, this object contains the value of
the ethertype in the 802.1q VLAN outer tag. If
pdnDot1dBasePortOuterTag (above) is zero (0) this
object is ignored. |
| pdnDot1dTrafficProfile | 1.3.6.1.4.1.1795.2.24.2.58.1.2 | | | |
| TES pdnDot1dTrafficProfileNextIndex | 1.3.6.1.4.1.1795.2.24.2.58.1.2.1 | TestAndIncr | read-write | This object is used to establish the next unused
index (pdnDot1dTrafficProfileIndex) for the
pdnDot1dTrafficProfileTable.
This object is used to assist the manager in
selecting a value for pdnDot1dTrafficProfileIndex.
Because this object is of syntax TestAndIncr (see the
SNMPv2-TC document, RFC 2579), it can also be used
to avoid race conditions with multiple managers
trying to create rows in the table.
If the result of the SET for
pdnDot1dTrafficProfileIndex is not success, this means
the value has been changed from index (i.e. another
manager used the value), so a new value is required.
The algorithm is:
done = false
while done == false
index = GET (pdnDot1dTrafficProfileNextIndex.0)
SET (pdnDot1dTrafficProfileNextIndex.0=index)
if (set failed)
done = false
else
pdnDot1dTrafficProfileRowStatus.index=createAndGo
SET (pdnDot1dTrafficProfileRowStatus.index)
if (set failed)
done = false
else
done = true
other error handling
This description was modeled from RFC2494,
DS0BUNDLE-MIB. |
| pdnDot1dTrafficProfileTable | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2 | | not-accessible | The Paradyne Layer 2 Traffic Profile Table.
Provides attributes for traffic profiles for MAC
bridges based on the IEEE 802.1D standard. |
| pdnDot1dTrafficProfileEntry | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1 | | not-accessible | Each entry represents a particular traffic profile.
Another table in this module will map to entries in
this table. |
| PDN pdnDot1dTrafficProfileIndex | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.1 | PdnTestAndIncrDerivedIndexTC | not-accessible | A unique identifier for a table entry. This object
is expected to be derived from the use of
pdnDot1dTrafficProfileNextIndex object above. |
| ROW pdnDot1dTrafficProfileRowStatus | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.2 | RowStatus | read-create | This object allows create, change, and delete
operations on the table. The delete operation can
only occur when the pdnDot1dTrafficProfileNbrRefs
is 0 meaning that there are no references to this
particular traffic profile. |
| STR pdnDot1dTrafficProfileName | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.3 | SnmpAdminString | read-create | An alphanumeric string to name the profile for the
table entry. |
| U32 pdnDot1dTrafficProfileNbrRefs | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.4 | Unsigned32 | read-only | The number of entries in the Traffic Profile Mapping
Table that reference this traffic profile entry. |
| INT pdnDot1dTrafficProfileTrafficClass | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.5 | INTEGER | read-create | The classification of traffic the entry is to be
associated with. |
| U32 pdnDot1dTrafficProfileMaxRate | 1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.6 | Unsigned32 | read-create | The maximum rate attribute in bits per second. This
provides `rate limiting' functionality. If the value
of this object is `0', then this attribute is not
applied to the traffic profile. That is, the traffic
classified for this entry in the table is not `rate
limited'. |
| pdnDot1dTrafficProfileInvMappingTable | 1.3.6.1.4.1.1795.2.24.2.58.1.2.3 | | not-accessible | This table identifies the mapping from a
profile name (pdnDot1dTrafficProfileName) to a
profile index (pdnDot1dTrafficProfileIndex). |
| pdnDot1dTrafficProfileInvMappingEntry | 1.3.6.1.4.1.1795.2.24.2.58.1.2.3.1 | | not-accessible | Each entry represents the profile index that is mapped
from the profile name. |
| PDN pdnDot1dTrafficProfileInvIndex | 1.3.6.1.4.1.1795.2.24.2.58.1.2.3.1.1 | PdnTestAndIncrDerivedIndexTC | read-only | The profile index that corresponds to the table
entry. |
| pdnDot1dTrafficProfileMappingTable | 1.3.6.1.4.1.1795.2.24.2.58.1.2.4 | | not-accessible | Maps a MAC bridge port and traffic class to an entry
in the Traffic Profile Table
(pdnDot1dTrafficProfileTable). |
| pdnDot1dTrafficProfileMappingEntry | 1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1 | | not-accessible | An entry maps a MAC bridge port and a subport to a
traffic class profile.
The pdnDot1dTrafficProfileNbrRefs object in the
pdnDot1dTrafficProfileTable indicates the number of
entries in this table that references or maps to a
particular entry in the pdnDot1dTrafficProfileTable. |
| I32 pdnDot1dTrafficProfileMappingSubPort | 1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.1 | Integer32 | not-accessible | The subport portion of the entry definition. Subports
are supported in implementations where MAC bridge
ports can be subdivided. Implementations that do not
support the subdividing of MAC bridge ports should set
this object to `1'. |
| ROW pdnDot1dTrafficProfileMappingRowStatus | 1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.2 | RowStatus | read-create | This object allows create, change, and delete
operations on the table. |
| PDN pdnDot1dTrafficProfileMappingIndex | 1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.3 | PdnTestAndIncrDerivedIndexTC | read-create | The traffic profile in the pdnDot1dTrafficProfileTable,
identified by the pdnDot1dTrafficProfileIndex that this
entry maps to. |
| pdnBridgeExtAFNs | 1.3.6.1.4.1.1795.2.24.2.58.2 | | | |
| pdnBridgeExtConformance | 1.3.6.1.4.1.1795.2.24.2.58.3 | | | |
| pdnBridgeExtCompliances | 1.3.6.1.4.1.1795.2.24.2.58.3.1 | | | |
| pdnBridgeExtCompliance | 1.3.6.1.4.1.1795.2.24.2.58.3.1.1 | | | The compliance statement for network elements
implementing extensions to the BRIDGE-MIB. |
| pdnBridgeExtGroups | 1.3.6.1.4.1.1795.2.24.2.58.3.2 | | | |
| pdnBridgeExtObjGroups | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1 | | | |
| pdnDot1dBasePortMaxFdbEntriesGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.1 | | | Configures the maximum number of entries allowed in
a bridge port's forwarding database. |
| pdnDot1dBasePortRoleGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.2 | | | Objects related to the role attribute on a bridge
port. |
| pdnDot1dBasePortUnknownMulticastForwardingModeGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.3 | | | Provides the ability to configure the forwarding
mode for unknown multicast frames. |
| pdnBridgeExtTPGroups | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4 | | | |
| pdnDot1dTrafficProfileBasicGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4.1 | | | Objects supporting the `basic' framework for
configuring traffic profiles. Objects supporting
specific attributes of a profile exist in other
groups. |
| pdnDot1dTrafficProfileMaxRateGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4.2 | | | Object to support the configuration of the maximum
rate traffic profile attribute. |
| pdnDot1dQinQVlanGroup | 1.3.6.1.4.1.1795.2.24.2.58.3.2.1.5 | | | Objects related to QinQ VLAN (802.1ad |
| pdnBridgeExtAfnGroups | 1.3.6.1.4.1.1795.2.24.2.58.3.2.2 | | | |
| pdnBridgeExtNtfyGroups | 1.3.6.1.4.1.1795.2.24.2.58.3.2.3 | | | |
