PANDATEL-BMP-MODEM-MIB

All MIBs › PANDATEL-BMP-MODEM-MIB

Category: Modems

Description: Manages Pandatel BMP series modem configuration, line status, and performance statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PANDATEL-BMP-MODEM-MIB?

PANDATEL-BMP-MODEM-MIB is a Pandatel AG (leased-line modem/multiplexer vendor) proprietary MIB reporting BM-P baseband-modem inventory and configuration across modem racks. Its modem table, keyed by rack/position, records modem name, data-equipment emulation, clock mode, distance, data-rate adaptation, clock source, data rate, and local carrier-detect 1/2 status. As a configuration/status MIB it lets an administrator confirm clocking and data-rate settings and carrier-detect status for a specific BM-P modem in a Pandatel rack. It is deployed on Pandatel AG BM-P modem equipment. Engineers can download the PANDATEL-BMP-MODEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PANDATEL-BMP-MODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Pandatel AG BM-P modem equipment

Monitoring Examples

An administrator checks mdmLocalCarrierDetect1 and mdmClockSource to confirm carrier status and clocking configuration for a specific BM-P modem in a Pandatel rack.

What Can Be Monitored

per-modem clocking, data-rate, and carrier-detect status

Imported Objects

From PANDATEL-MODEM-MIB

device-id
mdmSpecifics	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bmp	1.3.6.1.4.1.760.1.1.2.1.10.301
bmpModemTable	1.3.6.1.4.1.760.1.1.2.1.10.301.1		not-accessible	This table contains information about all BM-P modems in all racks.
bmpTableEntry	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1		not-accessible	The index of the table.
INT mdmRack	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.1	INTEGER	read-only	The index of the rack where the modem is installed.
INT mdmModem	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.2	INTEGER	read-only	This variable displays the slot number where the corresponding modem is installed in the rack.
INT mdmPosition	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.3	INTEGER	read-only	This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'.
STR mdmModemName	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.5	DisplayString	read-only	The verbal name of this modem.
INT mdmDataEquipmentEmulation	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.6	INTEGER	read-only	Interface mode of the unit: 'dte' or 'dce', 'te' or 'nt'.
INT mdmClockMode	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.20	INTEGER	read-write	The clock mode of the unit: 'master' or 'slave'.
INT mdmDistance	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.21	INTEGER	read-write	The transmission distance of the unit: 'long' or 'short'. 'Long' is valid for link data rates of up to 64 Kbps. For data rates higher than 64 Kbps this entry must be set to 'short'.
INT mdmDataRateAdaptation	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.22	INTEGER	read-write	This entry enables or disables data rate adaptation, i.e. one unit operates at line speed and the other one at lower speeds (1.2, 2.4, 4.8 or 9.6 Kbps at 64 Kbps line speed and 1.2, 2.4, 4.8, 9.6 or 19.2 Kbps at 128 Kbps line speed).
INT mdmClockSource	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.24	INTEGER	read-write	The clock source of the link: 'internal', 'external', or 'async'.
INT mdmDataRate	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.25	INTEGER	read-write	The data rate at the interface in bits per seconds. If dataRateAdaptation is disabled, the data rate at the remote counterpart changes simultaneously. Otherwise the data rate at one unit is fixed to line speed and the data rate at the other unit must be set to speeds lower than line speed.
INT mdmLocalCarrierDetect1	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.60	INTEGER	read-write	The data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only.
INT mdmLocalCarrierDetect2	1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.61	INTEGER	read-write	The data carrier detect mode 2 at the interface: if set to 'fo-link-and-remote-handshake' the DSR signal follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DSR signal follows link status only.
bmp_modem	1.3.6.1.4.1.760.1.1.2.1.10.10000.2.301

RFC description

Manages BM-P modem configuration and operation parameters in Pandatel modem racks, including clock modes and data rate settings.

Start monitoring Pandatel AG BM-P modem equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PANDATEL-BMP-MODEM-MIB

What Is PANDATEL-BMP-MODEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description