All MIBs › PANDATEL-FXG-MODEM-MIB
Category: Modems
Description:
Manages Pandatel FXG series fiber extender with Gigabit modem configuration, line status, and performance statistics.
Imported Objects
From PANDATEL-MODEM-MIB
| device-id | |
| mdmSpecifics | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
What Is PANDATEL-FXG-MODEM-MIB?
PANDATEL-FXG-MODEM-MIB is an enterprise MIB for Pandatel's FXG series fiber-extender/gigabit modems, used to extend Ethernet/fiber links in telecom access networks. It exposes per-modem identification (rack/position), alarm status, remote-access mode, clock recovery, and operation mode settings. Its core monitoring purpose is hardware/link status: mdmAlarm and mdmInterfaceAlarmCondition directly report modem and line faults such as loss of signal or sync, letting an operator detect a failing modem or a degrading fiber segment. It is a standalone Pandatel enterprise MIB with no notable dependency on standard IETF MIBs. It is deployed in rack-mounted modem shelves providing fiber-to-copper or gigabit link extension in carrier access networks. Engineers can download the PANDATEL-FXG-MODEM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PANDATEL-FXG-MODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- modem alarm status
- interface alarm condition
- clock recovery mode
- operation mode
- remote access mode
- rack/position identification
Supported Devices
- Pandatel FXG series fiber extender/gigabit modems
Monitoring Examples
fxgModemTable/fxgTableEntry, indexed by mdmRack, mdmModem, and mdmPosition, exposes mdmModemName, mdmAlarm, mdmInterfaceAlarmCondition, mdmClockRecovery, and mdmOperationMode. An administrator polling mdmAlarm across a rack would notice mdmInterfaceAlarmCondition indicating an active alarm on one modem, flagging a line fault such as loss-of-signal on that specific fiber-extender unit. This pinpoints exactly which rack position needs a technician visit or fiber inspection.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fxg | 1.3.6.1.4.1.760.1.1.2.1.10.506 | |||
| fxgModemTable | 1.3.6.1.4.1.760.1.1.2.1.10.506.1 | not-accessible | The table of all FX-G modems in this housing. | |
| fxgTableEntry | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1 | not-accessible | The index of the table. | |
| INT mdmRack | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.1 | INTEGER | read-only | The index of the rack where the modem is installed. |
| INT mdmModem | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.2 | INTEGER | read-only | This variable displays the slot number where the corresponding modem is installed in the rack. |
| INT mdmPosition | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.3 | INTEGER | read-only | This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'. |
| STR mdmModemName | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.5 | DisplayString | read-only | A verbal name of this modem. |
| INT mdmAlarm | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.15 | INTEGER | read-only | The status of local alarm: 'off' or 'on'. |
| INT mdmRemoteAccessMode | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.64 | INTEGER | read-write | The possibility of remote management: 'enabled', 'disabled local' or 'disable local and remote'. Once disabled management at local and remote unit, it is not possible to enable it at the remote unit again. |
| INT mdmForcedRemoteAccess | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.65 | INTEGER | read-write | Activation of remote management: 'on' or 'off'. Status 'on' enables management of remote unit. During this process the link is restricted to management data. The transmission of user data is interrupted. Status 'off' disables management of remote unit. The link transmits user data. |
| INT mdmClockRecovery | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.70 | INTEGER | read-write | The clock recovery and data retiming at interface and line port. The remote unit's configuration changes simultaneously. |
| INT mdmOperationMode | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.72 | INTEGER | read-write | The possibility of operation mode: 'converter mode' or 'modem mode'. |
| INT mdmInterfaceAlarmCondition | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.98 | INTEGER | read-write | The alarm trigger mode at interface port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down. |
| INT mdmLineAlarmCondition | 1.3.6.1.4.1.760.1.1.2.1.10.506.1.1.99 | INTEGER | read-write | The alarm trigger mode at line port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down. |
| fxg_modem | 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.506 |
RFC description
Pan Dacom Telekommunikations modem management MIB for FXG modem devices. Provides SNMP access to modem status, configuration, and performance parameters for remote serial communication equipment.
Start monitoring Pandatel FXG series fiber extender/gigabit modems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.