OC-STB-HOST-MIB

All MIBs › OC-STB-HOST-MIB

Organization: Cable Television Laboratories, Inc.

Last Updated: 2017-06-15

Description: CableLabs OpenCable MIB for monitoring Set-Top Box (STB) host devices in cable TV networks, covering tuner, storage, software versions, and conditional access

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OC-STB-HOST-MIB?

This is a CableLabs OpenCable specification MIB governing the 'Host' module of a cable Set-Top Box (STB) -- the consumer device that decodes and displays digital cable television signals -- and is openly licensed under Apache 2.0 as part of the OpenCable/tru2way standards. It exposes host device identity (serial number, host ID), capability flags (including AVC/H.264 support), audio/video interface tables (type, description, status per interface), and IEEE 1394 (FireWire) interface tables used for digital content transport between the STB and other devices. It supports monitoring both hardware and software status of the STB: serial/host identity for asset tracking, AV interface up/down status, IEEE 1394 link state, and capability negotiation, alongside conditional-access and tuner-related status implied by the broader OpenCable Host specification. It depends on the CableLabs OpenCable Host specification and related tru2way/OCAP standards for object semantics, and is a vendor-neutral MIB implemented across STB manufacturers. It is deployed on cable-operator-issued digital set-top boxes across North American cable television networks. Engineers implementing or auditing this functionality typically reference the OC-STB-HOST-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in OC-STB-HOST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

cable set-top box (STB)
vendor-neutral, CableLabs OpenCable-standards-based MIB, applies to any compliant STB host device

Monitoring Examples

A cable headend management system would poll ocStbHostAVInterfaceTable's ocStbHostAVInterfaceStatus for each ocStbHostAVInterfaceIndex to confirm HDMI/component AV outputs on a subscriber's STB are reporting connected. Checking ocStbHostIEEE1394Table entries reveals whether FireWire-connected peripheral devices are recognized. ocStbHostSerialNumber and ocStbHostHostID identify the specific unit for a truck-roll or remote diagnostic session. An AV interface stuck in a fault status while ocStbHostCapabilities indicates AVC support is present suggests a cabling or HDCP handshake problem rather than a firmware limitation.

What Can Be Monitored

STB serial number/host ID
AV interface status per interface
IEEE 1394 interface presence/status
device capability flags (e.g. AVC support)

Imported Objects

From CLAB-DEF-MIB

clabProjOpenCable

OBJECT-IDENTITY

From DOCS-IF-MIB

TenthdB
TenthdBmV

From HOST-RESOURCES-MIB

hrDeviceIndex	OBJECT-TYPE
hrStorageIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

AutonomousType
DateAndTime
DisplayString
MacAddress
PhysAddress
RowPointer
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ocStbHostFirmwareDownloadFailedCount OID:

Select a Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ocStbHostFirmwareDownloadFailedCount into the Find box to locate it in the OID tree, then select it and click OK. This object details the number of times the product attempted to download the firmware object defined by ocStbHostFirmwareCodeObjectName. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ocStbHostMibModule	1.3.6.1.4.1.4491.2.3.1			Licensed under the Apache License, Version 2.0 (the 'License'); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an 'AS IS' BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. This MIB module contains the management objects for the management of OpenCable Set-top Host Device.
ocStbHostNotifications	1.3.6.1.4.1.4491.2.3.1.0
NTF ocStbPanicDumpTrap	1.3.6.1.4.1.4491.2.3.1.0.1			Notifies host that a panic dump condition has occurred. The headend then may issue a TFTP Get to retrieve the dump or ignore the trap and allow the host ocStbHostDumpEventTimeout timer to expire. This trap is sent only when the ocStbHostDumpEventCount object has a non-zero value.
ocStbHostMibObjects	1.3.6.1.4.1.4491.2.3.1.1
ocStbHostSystem	1.3.6.1.4.1.4491.2.3.1.1.1
ocStbHostHWIdentifiers	1.3.6.1.4.1.4491.2.3.1.1.1.1
STR ocStbHostSerialNumber	1.3.6.1.4.1.4491.2.3.1.1.1.1.1	SnmpAdminString	read-only	The manufacturer's serial number for this device.
STR ocStbHostHostID	1.3.6.1.4.1.4491.2.3.1.1.1.1.2	DisplayString	read-only	Allows the manager to retrieve the 40-bit Host ID of the ocStbHost (SNMP apdu TLV #1) in the string format indicated below: M-MMU-UUU-UUU-UUL Where: M-MM is the decimal representation of the 10-bit CHICA assigned manufacturer number. U-UUU-UUU-UU is the decimal representation of the 30-bit manufacturer assigned unit number. L is a Luhn check digit calculated over the preceding 12 decimal digits. If the Host ID is unknown, then the string shall be all zeros e.g., '0-000-000-000-000'.
INT ocStbHostCapabilities	1.3.6.1.4.1.4491.2.3.1.1.1.1.3	INTEGER	read-only	The capabilities indication of the STB device. 'other' means a device which is not described by one of the other enumerations in this list. 'ochd2' means the STB device is an OpenCable Host Device Version 2 Compliant device. 'embedded' means the STB device is of the non-removable security type. 'dcas' means the STB device is of the downloadable security type. 'ochd21' means the STB device is an OpenCable Host Device Version 2.1 Compliant device. 'bocr' means the STB is bi-directional OCUR compliant. 'ochdtc' means the STB is an OpenCable Host Thin Chassis device.
T/F ocStbHostAvcSupport	1.3.6.1.4.1.4491.2.3.1.1.1.1.4	TruthValue	read-only	The AVC capabilities indication of the STB device. The object has a value of true (1) if AVC decode is supported. Otherwise, the object has a value of false (2). The object is required when the ocStbHostCapabilities value is ochd(2); otherwise the object is optional.
ocStbHostInterfaces	1.3.6.1.4.1.4491.2.3.1.1.1.2
ocStbHostDevInterfaceTypes	1.3.6.1.4.1.4491.2.3.1.1.1.2.1
ocStbHostOther	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.1			The type identifier used for an interface not defined in this MIB.
ocStbHostScte55FdcRx	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.2			The type identifier used for SCTE-55 FDC Receiver (i.e., out-of-band downstream tuner).
ocStbHostScte55RdcTx	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.3			The type identifier used for SCTE-55 RDC Transmitter (i.e., out-of-band upstream transmitter).
ocStbHostScte40FatRx	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.4			The type identifier used for SCTE-40 FAT Receiver (i.e., in-band video tuner).
ocStbHostBbVideoIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.5			The type identifier used for baseband video input.
ocStbHostBbAudioIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.6			The type identifier used for baseband audio input.
ocStbHostBbVideoOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.7			The type identifier used for baseband video output.
ocStbHostBbAudioOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.8			The type identifier used for baseband audio output.
ocStbHostRfOutCh	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.9			The type identifier used for analog RF output.
ocStbHostSVideoIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.10			The type identifier used for SVideo input.
ocStbHostSVideoOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.11			The type identifier used for SVideo output.
ocStbHostComponentIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.12			The type identifier used for Component input.
ocStbHostComponentOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.13			The type identifier used for Component output.
ocStbHostDviIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.14			The type identifier used for DVI input.
ocStbHostDviOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.15			The type identifier used for DVI output.
ocStbHostHdmiIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.16			The type identifier used for HDMI input.
ocStbHostHdmiOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.17			The type identifier used for HDMI output.
ocStbHostRcaSpdifIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.18			The type identifier used for RCA SPDIF input.
ocStbHostRcaSpdifOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.19			The type identifier used for RCA SPDIF output.
ocStbHostToslinkSpdifIn	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.20			The type identifier used for Toslink SPDIF input.
ocStbHostToslinkSpdifOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.21			The type identifier used for Toslink SPDIF output.
ocStbHostDisplayOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.22			The type identifier used for the television screen output.
ocStbHost1394In	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.23			The type identifier used for IEEE-1394 input.
ocStbHost1394Out	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.24			The type identifier used for IEEE-1394 output.
ocStbHostDRIInterface	1.3.6.1.4.1.4491.2.3.1.1.1.2.1.25			The type identifier used for the DRI interface.
ocStbHostAVInterfaceTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.2		not-accessible	This table contains a list of A/V (Audio/Video) interfaces (video inputs/outputs, tuners, audio inputs/outputs) in the ocStbHost.
ocStbHostAVInterfaceEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1		not-accessible	Each entry describes the type and status of the A/V interface on the ocStbHost. The details of A/V interface entries may be defined in table extensions as indicated in the MIB object ocStbHostAVInterfaceType.
U32 ocStbHostAVInterfaceIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.1	Unsigned32	not-accessible	Index of the table.
OID ocStbHostAVInterfaceType	1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.2	AutonomousType	read-only	An indication of the type of interface. If this value is ocStbHostComponentOut then a corresponding entry exists in the ocStbHostComponentVideoTable. If this value is ocStbHostRFOutCh then a corresponding entry exists in the ocStbHostRFChannelOutTable. If this value is ocStbHostScte40FatRx then a corresponding entry exists in the ocStbHostInBandTunerTable. If this value is ocStbHostDviOut or ocStbHostHdmiOut then a corresponding entry exists in the ocStbHostDVIHDMITable If this value is ocStbHost1394Out then a corresponding entry exists in the ocStbHostIEEE1394Table If this value is hrDeviceOther then no further information is available for the device.
STR ocStbHostAVInterfaceDesc	1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.3	SnmpAdminString	read-only	Textual description of the A/V Interface
INT ocStbHostAVInterfaceStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.4	INTEGER	read-only	Status of the interface. 'enabled' indicates the A/V interface is active and can be used for the user. 'disabled' indicates the A/V interface is currently not available for the user due to hardware, software or configuration conditions. Additional information about the interface status may be available in the A/V Type interface Table extensions.
ocStbHostIEEE1394Objects	1.3.6.1.4.1.4491.2.3.1.1.1.2.3
ocStbHostIEEE1394Table	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1		not-accessible	This table contains attributes associated with the ocStbHost Interfaces of type IEEE 1394.
ocStbHostIEEE1394Entry	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1		not-accessible	An entry exists in this table for each interface of the type IEEE 1394.
I32 ocStbHostIEEE1394ActiveNodes	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.1	Integer32	read-only	This object allows the manager to retrieve the number of nodes connected to the 1394 bus of the ocStbHost. The value '-1' means unknown number of nodes.
T/F ocStbHostIEEE1394DataXMission	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.2	TruthValue	read-only	This object allows the manager to retrieve the state of data being transmitted over the 1394 bus. True indicates that data is being transmitted over the 1394 bus.
T/F ocStbHostIEEE1394DTCPStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.3	TruthValue	read-only	This object allows the manager to retrieve the state of DTCP on the device. True indicates that DTCP is enabled and content is being encrypted of the 1394 link on the ocStbHost.
T/F ocStbHostIEEE1394LoopStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.4	TruthValue	read-only	This object allows the manager to retrieve the state of a Loop present on the 1394 bus. True indicates that a Loop is present on the 1394 bus.
T/F ocStbHostIEEE1394RootStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.5	TruthValue	read-only	This object allows the manager to retrieve the state of Root Status on the device. True indicates that the set-top is the Root node on the 1394 bus.
T/F ocStbHostIEEE1394CycleIsMaster	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.6	TruthValue	read-only	This object allows the manager to retrieve the state of Cycle Master on the device. True indicates that the set-top is Cycle Master on the 1394 bus.
T/F ocStbHostIEEE1394IRMStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.7	TruthValue	read-only	This object allows the manager to retrieve the state of Isochronous Resource Master on the device. True indicates that the set-top is IRM on the 1394 bus.
T/F ocStbHostIEEE1394AudioMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.8	TruthValue	read-only	The value 'true' indicates that the audio signal is muted for this Interface. 'false' means the audio is not muted.
T/F ocStbHostIEEE1394VideoMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.9	TruthValue	read-only	The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted.
ocStbHostIEEE1394ConnectedDevicesTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2		not-accessible	This table contains A/D Source Selection attributes associated to devices connected to the ocStbHost Interfaces of type IEEE 1394.
ocStbHostIEEE1394ConnectedDevicesEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1		not-accessible	An entry exist in this table for each device connected to all Interfaces of the type IEEE 1394.
U32 ocStbHostIEEE1394ConnectedDevicesIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.1	Unsigned32	not-accessible	The unique identifier of the connected device entry.
U32 ocStbHostIEEE1394ConnectedDevicesAVInterfaceIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.2	Unsigned32	read-only	This object allows the manager to retrieve the index value associated with the IEEE1394 instance of ocStbHostAVInterfaceIndex to which the device is physically connected.
INT ocStbHostIEEE1394ConnectedDevicesSubUnitType	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.3	INTEGER	read-only	This object allows the manager to retrieve the Subunit Type associated with the device connected to the ocStbHost's IEEE1394 interface.
OCT ocStbHostIEEE1394ConnectedDevicesEui64	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.4	OCTET STRING	read-only	This object allows the manager to retrieve the 64-bit Extended Unique Identifier (EUI-64) associated with the device connected to the ocStbHost's IEEE1394 interface.
T/F ocStbHostIEEE1394ConnectedDevicesADSourceSelectSupport	1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.5	TruthValue	read-only	This object allows the manager to retrieve the status of Analog/Digital Source Selection support associated with the device connected to the ocStbHost's IEEE1394 interface. 'true' indicates that the device supports A/D source selection.
ocStbHostDigitalVideoOutput	1.3.6.1.4.1.4491.2.3.1.1.1.2.4
ocStbHostDVIHDMITable	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1		not-accessible	This table allows the manager to retrieve information about the DVI/HDMI port of the ocStbHost.
ocStbHostDVIHDMIEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1		not-accessible	An entry exists for each A/V interface of type HDMI or DVI of the ocStbHost.
INT ocStbHostDVIHDMIOutputType	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.2	INTEGER	read-only	This object defines the operational mode of the interface, where valid modes are dependent on the physical interface defined. If ocStbHostAVInterfaceIndex is DVI, then this value is always set to 1 (DVI). If ocStbHostAVInterfaceIndex is HDMI, then this value is either 1 (DVI) or 2 (HDMI).
T/F ocStbHostDVIHDMIConnectionStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.3	TruthValue	read-only	This object allows the manager to retrieve the state of the DVI/HDMI port on the device. 'true' indicates that a device is connected to the ocStbHost.
T/F ocStbHostDVIHDMIRepeaterStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.4	TruthValue	read-only	This object allows the manager to retrieve the presence of a repeater connected to the ocStbHost. 'true' indicates that a repeater is connected to the ocStbHost.
T/F ocStbHostDVIHDMIVideoXmissionStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.5	TruthValue	read-only	This object allows the manager to retrieve the state of video transmission over the DVI/HDMI port of the ocStbHost. 'true' indicates that video is being transmitted over the DVI/HDMI link to a connected device.
T/F ocStbHostDVIHDMIHDCPStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.6	TruthValue	read-only	This object allows the manager to retrieve the state of the digital copy protection protocol in the interface. 'true' indicates that HDCP encryption is enabled.
T/F ocStbHostDVIHDMIVideoMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.7	TruthValue	read-only	The value 'true' indicates that the video signal is being muted over the DVI/HDMI link. 'false' means the video signal is not muted.
VID ocStbHostDVIHDMIOutputFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.8	VideoOutputFormat	read-only	This object allows the manager to retrieve the video timing format currently being transmitted over the DVI/HDMI link.
VID ocStbHostDVIHDMIAspectRatio	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.9	VideoAspectRatio	read-only	This object allows the manager to retrieve the aspect ratio applicable to the video timing format currently being transmitted over the DVI/HDMI link. e.g., 4/3 or 16/9.
INT ocStbHostDVIHDMIHostDeviceHDCPStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.10	INTEGER	read-only	Connected device HDCP status.
AUD ocStbHostDVIHDMIAudioFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.11	AudioOutputFormat	read-only	This object allows the manager to retrieve the audio format being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
INT ocStbHostDVIHDMIAudioSampleRate	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.12	INTEGER	read-only	This object allows the manager to retrieve the audio sample rate being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
U32 ocStbHostDVIHDMIAudioChannelCount	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.13	Unsigned32	read-only	This object allows the manager to retrieve the audio channel count being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
T/F ocStbHostDVIHDMIAudioMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.14	TruthValue	read-only	The value 'true' indicates that the audio signal is muted over the DVI/HDMI link. 'false' means the audio is not muted. This object is not instantiated for entries of ocStbHostDVIHDMIOutputType 'dvi'.
INT ocStbHostDVIHDMIAudioSampleSize	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.15	INTEGER	read-only	Non-zero values pertain only to PCM audio formats and indicate the PCM sample size. This object applies only to HDMI outputs.
INT ocStbHostDVIHDMIColorSpace	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.16	INTEGER	read-only	Color space for HDMI outputs only.
INT ocStbHostDVIHDMIFrameRate	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.17	INTEGER	read-only	Frame rates for HDMI outputs as defined in CCIF spec: frameRateCode1 = 23.976 Hz frameRateCode2 = 24.0 Hz frameRateCode3 = 29.97 Hz frameRateCode4 = 30.0 Hz frameRateCode5 = 59.94 Hz frameRateCode6 = 60.0 Hz.
INT ocStbHostDVIHDMIAttachedDeviceType	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.18	INTEGER	read-only	The HDMI defined types of devices derived defined in the DHMI specification version 1.3a.
OCT ocStbHostDVIHDMIEdid	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.19	OCTET STRING	read-only	EDID blob for debugging. A 0x00 should be returned if an EDID is not available.
I32 ocStbHostDVIHDMILipSyncDelay	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.20	Integer32	read-only	Defines the amount of delay in milliseconds that is being applied to the audio delivered over the HDMI link. A value of zero indicates that either no delay is being applied or Lip Sync is not supported by the device.
BIT ocStbHostDVIHDMICecFeatures	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.21	Bits	read-only	This object lists all of the CEC Features supported by the device. When the bit is set, the feature is supported.
BIT ocStbHostDVIHDMIFeatures	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.22	Bits	read-only	This object lists all of the HDMI Features supported by the device. When the bit is set, the feature is supported.
I32 ocStbHostDVIHDMIMaxDeviceCount	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.23	Integer32	read-only	Defines the maximum number of downstream devices that this device can support.
INT ocStbHostDVIHDMIPreferredVideoFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.24	INTEGER	read-only	This object allows the manager to retrieve the preferred video format of the sink device. The value is an integer representing the video timing format expressed as a CEA-861 Video Identification Code (VIC). If the Host is not able to determine the preferred video format, or there is no corresponding VIC, then the Host sets this value to zero. The Host also sets this value to zero if there is no EDID or active HDMI/DVI connection in place.
STR ocStbHostDVIHDMIEdidVersion	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.25	SnmpAdminString	read-only	EDID version reported in bytes 18 and 19 of the EDID itself. It is in version.release format. A value of 0.0 should be returned if an EDID is not available.
INT ocStbHostDVIHDMI3DCompatibilityControl	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.26	INTEGER	read-write	Defines what action to take for a display device that has not reported support for the received S3D content. passthru3D(1) requires the content to be passed onto the display device. blocked3D(2) requires the STB to not pass the content to the display device.
T/F ocStbHostDVIHDMI3DCompatibilityMsgDisplay	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.27	TruthValue	read-write	True(1) requires the STB to generate and transmit a warning message when the following occurs: 1) the STB receives S3D content and 2) the display device has not reported support for that format. The message should indicate that an incompatibility may exist between the source format and the display device capabilities. The STB must not send a warning message in this scenario if this object is set to false(2).
ocStbHostDVIHDMIAvailableVideoFormatTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2		not-accessible	This table allows the manager to retrieve a list of all of the video timing formats reported by the sink device as per the device's EDID.
ocStbHostDVIHDMIAvailableVideoFormatEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1		not-accessible	Entry in the ocStbHostDVIHDMIAvailableVideoFormatTable.
INT ocStbHostDVIHDMIAvailableVideoFormatIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.1	INTEGER	not-accessible	Index in the ocStbHostDVIHDMIAvailableVideoFormatTable.
INT ocStbHostDVIHDMIAvailableVideoFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.2	INTEGER	read-only	This object allows the manager to retrieve the available video formats of the sink device. The value is an integer representing the video timing format expressed as a CEA-861 Video Identification Code (VIC). If the Host is not able to determine the available video formats, or there is no corresponding VIC, then the Host makes an entry with a value of zero. The Host also makes an entry with a value of zero if there is no active HDMI/DVI connection in place.
BIT ocStbHostDVIHDMISupported3DStructures	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.3	Bits	read-only	This object reports the 3D structures supported by the sink as reported in the EDID VSDB. The supported structures are specified in [HDMI] Appendix H.
INT ocStbHostDVIHDMIActive3DStructure	1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.4	INTEGER	read-only	This object allows the manager to retrieve the contents of the HDMI Vendor Specific InfoFrame currently being transmitted by the source. The video signal corresponds to the row associated with sink's current 'active' VIC. Only one row can reflect an active 3D format at any point in time. The remaining, 'inactive', rows in this table should report 'na(1)' for not applicable. This object must be updated whenever the current HDMI InfoFrame content differs from the last HDMI InfoFrame transmitted. All reported values are based on the HDMI InfoFrame packet contents defined in [HDMI]. If 3D is currently being signaled, report the 3D structure identified in the InfoFrame. If an HDMI InfoFrame is being transmitted but no 3D structure is being signaled, use the HDMI_Video_format values in the HDMI Infoframe to report as follows: 000 - 'noAdditionalHDMIInfo(17)' 001 - 'no3DInformation(18)' If an HDMI InfoFrame is not being transmitted, report 'infoFrameNotAvailable(19)'.
ocStbHostAnalogOutput	1.3.6.1.4.1.4491.2.3.1.1.1.2.5
ocStbHostComponentVideoTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1		not-accessible	This table allows the manager to retrieve information about a Component Video interface of the ocStbHost.
ocStbHostComponentVideoEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1		not-accessible	An entry for each interface of type 'ocStbHostComponentOut'.
T/F ocStbHostComponentVideoConstrainedStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.1	TruthValue	read-only	This object allows the manager to retrieve the state of Constrained Video Image on the port. True indicates that video is being constrained over the component video output port.
VID ocStbHostComponentOutputFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.2	VideoOutputFormat	read-only	This object allows the manager to retrieve the video format currently being transmitted over the Component Video output port.
VID ocStbHostComponentAspectRatio	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.3	VideoAspectRatio	read-only	This object allows the manager to retrieve the video aspect ratio currently being transmitted over the Component Video output port.
T/F ocStbHostComponentVideoMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.4	TruthValue	read-only	The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted.
ocStbHostRFChannelOutTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2		not-accessible	This table allows the manager to retrieve information about an RF channel output interface of the ocStbHost.
ocStbHostRFChannelOutEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1		not-accessible	An entry for each interface of type 'ocStbHostRFOutCh'.
U32 ocStbHostRFChannelOut	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.2	Unsigned32	read-only	Indicates the RF channel out value. Typical values are 3 or 4 for Channels 3 and 4, respectively.
T/F ocStbHostRFChannelOutAudioMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.3	TruthValue	read-only	The value 'true' indicates that the audio signal is muted for this Interface. 'false' means the audio is not muted.
T/F ocStbHostRFChannelOutVideoMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.4	TruthValue	read-only	The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted.
ocStbHostSPDIfTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.6		not-accessible	This table allows the manager to retrieve information about the SONY, Philips Digital (SPD) Interface of the ocStbHost.
ocStbHostSPDIfEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1		not-accessible	An entry exists for each Audio interface of type SPD.
AUD ocStbHostSPDIfAudioFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.1	AudioOutputFormat	read-only	The format of the Audio stream transmitted over this interface.
T/F ocStbHostSPDIfAudioMuteStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.2	TruthValue	read-only	The value 'true' indicates that the audio signal is muted over the SPDIF link. 'false' means the audio is not muted.
ocStbHostServiceProgramInfo	1.3.6.1.4.1.4491.2.3.1.1.1.2.7
ocStbHostInBandTunerTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1		not-accessible	This Object Table allows the manager to retrieve information regarding the In-Band tuner(s) in the ocStbHost.
ocStbHostInBandTunerEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1		not-accessible	This entry contains information regarding a tuner of type ocStbHostScte40FatRx in the ocStbHost.
INT ocStbHostInBandTunerModulationMode	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.1	INTEGER	read-only	The In-band tuner modulation mode. Modulation modes are as follows: other - IB is configured in a manner not described by any other listed mode. Analog - IB is configured for analog service. QAM-64 - IB is configured for a digital service that is 64-QAM. QAM-256 - IB is configured for a digital service that is 256-QAM.
U32 ocStbHostInBandTunerFrequency	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.2	Unsigned32	read-only	This object allows the manager to retrieve the center frequency of the currently tuned channel in Hz.
INT ocStbHostInBandTunerInterleaver	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.3	INTEGER	read-only	The in-band interface interleaver value. set to '3' current operational mode 'taps64Increment2' set to '4' current operational mode 'taps128Increment1' set to '5' current operational mode 'taps128increment2' set to '6' current operational mode 'taps128increment3' set to '7' current operational mode 'taps128increment4' set to '8' current operational mode 'taps32increment4' set to '9' current operational mode 'taps16increment8' set to '10' current operational mode 'taps8increment16'
TEN ocStbHostInBandTunerPower	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.4	TenthdBmV	read-only	The received power level of this in-band interface.
U32 ocStbHostInBandTunerAGCValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.5	Unsigned32	read-only	This object allows the manager to retrieve the In-band channel AGC value (%). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates that the ocStbHost does not compute the value.
TEN ocStbHostInBandTunerSNRValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.6	TenthdB	read-only	This object allows the manager to retrieve the In-band channel SNR value (1/10 dB). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates that the ocStbHost does not compute the value.
C32 ocStbHostInBandTunerUnerroreds	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.7	Counter32	read-only	Codewords received on this channel without error. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated ifIndex.
C32 ocStbHostInBandTunerCorrecteds	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.8	Counter32	read-only	Codewords received on this in-band channel with correctable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
C32 ocStbHostInBandTunerUncorrectables	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.9	Counter32	read-only	Codewords received on this in-band channel with uncorrectable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
C32 ocStbHostInBandTunerCarrierLockLost	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.10	Counter32	read-only	The number of times the ocStbHost has detected carrier Lock is lost. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
C32 ocStbHostInBandTunerPCRErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.11	Counter32	read-only	The number of times the Program Clock Reference (PCR) detected Synchronization errors; e.g., wrong PCR from multiplexer, excessive CPR Jitter, etc. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
C32 ocStbHostInBandTunerPTSErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.12	Counter32	read-only	The number of Presentation TimeStamp (PTS) packets that encounter sequencing errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
INT ocStbHostInBandTunerState	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.13	INTEGER	read-only	The In-band tuner current state. Modulation modes are as follows: ready - indicates that the tuner is in idle mode (not currently in use). waitingSync - indicates that the tuner is trying to find sync on an analog channel. waitingQam - indicates that the tuner is trying to tune to the desired QAM frequency and lock onto valid data. foundSync - indicates that the tuner has successfully tuned to an analog channel. foundQam - indicates that the tuner has successfully tuned to a digital channel.
INT ocStbHostInBandTunerBER	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.14	INTEGER	read-only	The average Bit Error Rate range since last tune to a digital channel. This value is determined by dividing the number of erroneous bits by the total number of bits transmitted within the last 10 minutes of the object being polled. Report value of 7 if tuned to an analog channel.
U32 ocStbHostInBandTunerSecsSinceLock	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.15	Unsigned32	read-only	The amount of time, in seconds, since the last tuner lock on a valid data signal. Each time the tuner locks the ocStbHostInBandTunerUnerroreds, ocStbHostInBandTunerCorrecteds, and ocStbHostInBandTunerUncorrectables, counters should be set to 0.
I32 ocStbHostInBandTunerEqGain	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.16	Integer32	read-only	The value of the equalizer gain on the QAM data channel. A value of 0 (zero) indicates that the ocStbHost does not compute the value.
INT ocStbHostInBandTunerMainTapCoeff	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.17	INTEGER	read-only	The normalized main tap coefficient used for calibrating data path delay or frequency response. A value of 0 (zero) indicates that the ocStbHost does not compute the value.
C32 ocStbHostInBandTunerTotalTuneCount	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.18	Counter32	read-only	The number of times an attempt has been made to change the tuned frequency. This includes both successful and unsuccessful attempts.
C32 ocStbHostInBandTunerTuneFailureCount	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.19	Counter32	read-only	The number of times an attempt to change the tuned frequency has resulted in a failure to acquire a signal (either analog or digital).
U32 ocStbHostInBandTunerTuneFailFreq	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.20	Unsigned32	read-only	The most recent frequency at which an attempt to tune resulted in an increment of ocStbHostInBandTunerTuneFailureCount. If no tune attempt has failed since initialization, this value SHALL be zero.
INT ocStbHostInBandTunerBandwidth	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.21	INTEGER	read-only	The In-band tuner bandwidth. Tuner bandwidth choices are as follows: other - Tuning range is not described by any other listed range. mHz864 - Tuning range is 54 to 864 MHz mHz1002 - Tuning range is 54 to 1002 MHz.
ocStbHostProgramStatusTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2		not-accessible	A table of current program content being forwarded by the ocStbHost.
ocStbHostProgramStatusEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1		not-accessible	There is an entry in this table for each active program content path. This means that the same program content source and/or destination can be associated to multiple A/V interface combinations as different entries in this table.
U32 ocStbHostProgramIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.1	Unsigned32	not-accessible	Index for Program Status Entry Table.
NUM ocStbHostProgramAVSource	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.2	RowPointer	read-only	Defines the source interface associated with this entry. Example sources are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a Host Resources Device such as a DVR. If the source corresponds to an entry in the ocStbAVInterfaceTable, this object reports the ocStbAVInterfaceType instance of the source interface. If the source corresponds to a resource listed in the ifTable, this object reports the ifIndex instance of the source interface. If the source corresponds to a resource listed in hrDeviceTable, this object reports the hrDeviceType instance of the source interface. Other table rows may be designated by this object as appropriate to the particular source.
NUM ocStbHostProgramAVDestination	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3	RowPointer	read-only	Defines the destination interface associated with this entry. Example destinations are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a Host Resource Device such as a DVR. If the destination corresponds to an entry in the ocStbAVInterfaceTable, this object reports the ocStbAVInterfaceType instance of the destination interface. If the destination corresponds to an interface listed in the ifTable, this object reports the ifIndex instance of the destination interface. If the destination corresponds to a resource listed in the hrDeviceTable, this object reports the hrDeviceType instance of the destination interface. Other table rows may be designated by this object as appropriate to the particular destination.
NUM ocStbHostProgramContentSource	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.4	RowPointer	read-only	A pointer to the first visible object structure that defines the type of content associated to the A/V source interface. If MPEG-2 video is present,, this object points to the first visible object in ocStbHostMpeg2ContentEntry. If AVC video is present, this object points to the first visible object in ocStbHostMpeg4ContentEntry. If VC-1 is present, this object points to the first visible object in ocStbHostVc1ContentEntry. Vendor-specific Content models may be defined in the vendor enterprise IANA assigned OID. This object reports 'zeroDotZero' value if no content information is available.
NUM ocStbHostProgramContentDestination	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.5	RowPointer	read-only	A pointer to the first visible object structure that defines the type of content associated to the A/V destination interface. If MPEG-2 video is present, this object points to the first visible object in ocStbHostMpeg2ContentEntry. If AVC video is present, this object points to the first visible object in ocStbHostMpeg4ContentEntry. If VC-1 is present, this object points to the first visible object in ocStbHostVc1ContentEntry. Vendor-specific Content models may be defined in the vendor enterprise IANA assigned OID. This object reports 'zeroDotZero' value if no content information is available.
ocStbHostMpeg2ContentTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3		not-accessible	Contains information associated to an MPEG-2 Program carried by an MPEG-2 transport stream. Entries in this table can be associated to interfaces receiving or forwarding MPEG-2 content.
ocStbHostMpeg2ContentEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1		not-accessible	The conceptual row for this table.
U32 ocStbHostMpeg2ContentIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.1	Unsigned32	not-accessible	The unique identifier for the Mpeg2 Content entries in this table.
U32 ocStbHostMpeg2ContentProgramNumber	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.2	Unsigned32	read-only	The program Number associated with active content within the ocStbHost.
U32 ocStbHostMpeg2ContentTransportStreamID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.3	Unsigned32	read-only	Defines the transport stream ID associated with the program number.
U32 ocStbHostMpeg2ContentTotalStreams	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.4	Unsigned32	read-only	Defines the total number of elementary streams associated with the program number.
I32 ocStbHostMpeg2ContentSelectedVideoPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.5	Integer32	read-only	This object allows the manager to retrieve the PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or identified. The value is the 13-bit PID value expressed in decimal.
I32 ocStbHostMpeg2ContentSelectedAudioPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.6	Integer32	read-only	The selected audio PID. The value '-1' indicates no audio stream identified.
T/F ocStbHostMpeg2ContentOtherAudioPIDs	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.7	TruthValue	read-only	Then value 'true' indicates the MPEG-2 program has more than one audio PID. 'false' indicates the MPEG-2 program has only one audio PID.
INT ocStbHostMpeg2ContentCCIValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.8	INTEGER	read-only	This value allows the manager to retrieve the encryption Mode Indication (EMI) Bits of the Copy Control Information (CCI) byte associated with the service.
INT ocStbHostMpeg2ContentAPSValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.9	INTEGER	read-only	This value allows the manager to retrieve the Analog Protection System (APS) bits of the Copy Control Information (CCI) byte associated with the service. 'type1' indicates AGC ON, split burst OFF 'type2' indicates AGC ON, 2-line split burst 'type3' indicates AGC ON, 4-line split burst.
T/F ocStbHostMpeg2ContentCITStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.10	TruthValue	read-only	This value allows the manager to retrieve the state of the Constrained Image Trigger(CIT). 'true' indicates image constraint required. 'false' indicates image constraint not asserted.
T/F ocStbHostMpeg2ContentBroadcastFlagStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.11	TruthValue	read-only	This value allows the manager to retrieve the state of Broadcast Flag in the source interface. 'true' indicates Broadcast Flag present. 'false' indicates Broadcast Flag not present.
T/F ocStbHostMpeg2ContentEPNStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.12	TruthValue	read-only	This object allows the manager to retrieve the EPN status of the MPEG stream. 'true' indicates that EPN is asserted.
I32 ocStbHostMpeg2ContentPCRPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.13	Integer32	read-only	This object allows the manager to retrieve the PCR PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or identified. The value is the 13-bit PCR PID value expressed in decimal.
INT ocStbHostMpeg2ContentPCRLockStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.14	INTEGER	read-only	The status of the Program Clock Reference lock.
I32 ocStbHostMpeg2ContentDecoderPTS	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.15	Integer32	read-only	The value of the MPEG decoder Presentation TimeStamp (PTS). The LSB should be dropped to reduce the PTS length to 32 bits.
C32 ocStbHostMpeg2ContentDiscontinuities	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.16	Counter32	read-only	The sum of the audio and video PID discontinuities detected on the MPEG stream. The values are based on the time since PCR lock on the current PIDs or stream being reported
C32 ocStbHostMpeg2ContentPktErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.17	Counter32	read-only	The number of errors detected in the MPEG stream. The Values are based on the time since PCR lock on the Current PIDs or stream being reported
C32 ocStbHostMpeg2ContentPipelineErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.18	Counter32	read-only	The number of errors reported exclusively by the MPEG decoder.
C32 ocStbHostMpeg2ContentDecoderRestarts	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.19	Counter32	read-only	The number of times the software driver restarted the MPEG decoding process.
VID ocStbHostMpeg2ContainerFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.20	VideoContainerFormat	read-only	The format of the transport carrying the MPEG2 video stream.
ocStbHostAnalogVideoTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4		not-accessible	Contains information about the Analog Video signal. Entries in this table can be associated to interfaces receiving or forwarding analog content.
ocStbHostAnalogVideoEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1		not-accessible	The conceptual row for this table.
INT ocStbHostAnalogVideoProtectionStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1	INTEGER	read-only	The analog protection system (APS) of this Video content entry. The possible values are: 'copyProtectionOff' means the Macrovision Analog protection is off 'splitBurstOff' means the AGC (Automatic Gain Control) is on and the split burst is off. 'twoLineSplitBurst' means AGC is on with two-line split burst. 'fourLineSplitBurst' means AGC is on with four-line split burst. This object is instantiated only for A/V output interfaces that support APS like but not limited to: 'ocStbHostRfOutCh', 'ocStbHostSVideoOut' and 'ocStbHostBbVideoOut'. The A/V interfaces 'ocStbHostComponentOut' only support 'splitBurstOff' APS mode for the video formats 'format480i' and 'format480p'.
ocStbHostMpeg4ContentTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5		not-accessible	Contains information associated to an MPEG-4 Program carried by an MPEG-2 or MPEG-4 transport stream. Entries in this table can be associated to interfaces receiving or forwarding MPEG-4 content.
ocStbHostMpeg4ContentEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1		not-accessible	The conceptual row for this table.
U32 ocStbHostMpeg4ContentIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.1	Unsigned32	not-accessible	The unique identifier for the MPEG-4 Content entries in this table.
U32 ocStbHostMpeg4ContentProgramNumber	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.2	Unsigned32	read-only	The program Number associated with active content within the ocStbHost.
U32 ocStbHostMpeg4ContentTransportStreamID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.3	Unsigned32	read-only	Defines the transport stream ID associated with the program number.
U32 ocStbHostMpeg4ContentTotalStreams	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.4	Unsigned32	read-only	Defines the total number of elementary streams associated with the program number.
I32 ocStbHostMpeg4ContentSelectedVideoPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.5	Integer32	read-only	This object allows the manager to retrieve the PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or identified. The value is the 13-bit PID value expressed in decimal.
I32 ocStbHostMpeg4ContentSelectedAudioPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.6	Integer32	read-only	The selected audio PID. The value '-1' indicates no audio stream identified.
T/F ocStbHostMpeg4ContentOtherAudioPIDs	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.7	TruthValue	read-only	Then value 'true' indicates the MPEG-2 program has more than one audio PID. 'false' indicates the MPEG-4 program has only one audio PID.
INT ocStbHostMpeg4ContentCCIValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.8	INTEGER	read-only	This value allows the manager to retrieve the Encryption Mode Indication (EMI) Bits of the Copy Control Information (CCI) byte associated with the service.
INT ocStbHostMpeg4ContentAPSValue	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.9	INTEGER	read-only	This value allows the manager to retrieve the Analog Protection System (APS) bits of the Copy Control Information (CCI) byte associated with the service. 'type1' indicates AGC ON, split burst OFF 'type2' indicates AGC ON, 2-line split burst 'type3' indicates AGC ON, 4-line split burst.
T/F ocStbHostMpeg4ContentCITStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.10	TruthValue	read-only	This value allows the manager to retrieve the state of the Constrained Image Trigger(CIT). 'true' indicates image constraint required. 'false' indicates image constraint not asserted.
T/F ocStbHostMpeg4ContentBroadcastFlagStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.11	TruthValue	read-only	This value allows the manager to retrieve the state of Broadcast Flag in the source interface. 'true' indicates Broadcast Flag present. 'false' indicates Broadcast Flag not present.
T/F ocStbHostMpeg4ContentEPNStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.12	TruthValue	read-only	This object allows the manager to retrieve the EPN status of the MPEG stream. 'true' indicates that EPN is asserted.
I32 ocStbHostMpeg4ContentPCRPID	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.13	Integer32	read-only	This object allows the manager to retrieve the PCR PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or identified. The value is the 13-bit PCR PID value expressed in decimal.
INT ocStbHostMpeg4ContentPCRLockStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.14	INTEGER	read-only	The status of the Program Clock Reference lock.
I32 ocStbHostMpeg4ContentDecoderPTS	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.15	Integer32	read-only	The value of the MPEG decoder Presentation TimeStamp (PTS). The LSB should be dropped to reduce the PTS length to 32 bits.
C32 ocStbHostMpeg4ContentDiscontinuities	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.16	Counter32	read-only	The sum of the audio and video PID discontinuities detected on the MPEG stream. The values are based on the time since PCR lock on the current PIDs or stream being reported.
C32 ocStbHostMpeg4ContentPktErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.17	Counter32	read-only	The number of errors detected in the MPEG stream. The Values are based on the time since PCR lock on the Current PIDs or stream being reported.
C32 ocStbHostMpeg4ContentPipelineErrors	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.18	Counter32	read-only	The number of errors reported exclusively by the MPEG decoder.
C32 ocStbHostMpeg4ContentDecoderRestarts	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.19	Counter32	read-only	The number of times the software driver restarted the MPEG decoding process.
VID ocStbHostMpeg4ContainerFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.20	VideoContainerFormat	read-only	The format of the container carrying the MPEG4 video stream.
ocStbHostVc1ContentTable	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6		not-accessible	Contains information associated to a VC-1 Program carried by an MPEG-2 or MPEG-4 transport stream. This table will be expanded as VC-1 support is added to the Host.
ocStbHostVc1ContentEntry	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1		not-accessible	The conceptual row for this table.
U32 ocStbHostVc1ContentIndex	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.1	Unsigned32	not-accessible	The unique identifier for the Vc1 Content entries in this table.
U32 ocStbHostVc1ContentProgramNumber	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.2	Unsigned32	read-only	The program Number associated with active content within the ocStbHost.
VID ocStbHostVc1ContainerFormat	1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.20	VideoContainerFormat	read-only	The format of the transport carrying the VC1 video stream.
ocStbHostQpskObjects	1.3.6.1.4.1.4491.2.3.1.1.1.2.8
U32 ocStbHostQpskFDCFreq	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.1	Unsigned32	read-only	The frequency to which the QPSK receiver is currently tuned.
U32 ocStbHostQpskRDCFreq	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.2	Unsigned32	read-only	The frequency to which the QPSK transmitter is currently tuned.
INT ocStbHostQpskFDCBer	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.3	INTEGER	read-only	The rate at which bit errors are occurring based on the number of data errors since the frequency has been locked.
INT ocStbHostQpskFDCStatus	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.4	INTEGER	read-only	Forward data channel lock status.
U32 ocStbHostQpskFDCBytesRead	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.5	Unsigned32	read-only	The number of bytes successfully read since the frequency was locked.
TEN ocStbHostQpskFDCPower	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.6	TenthdBmV	read-only	The power level, in dBmV, of the forward data channel.
U32 ocStbHostQpskFDCLockedTime	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.7	Unsigned32	read-only	The number of seconds that the current FDC frequency has been locked.
TEN ocStbHostQpskFDCSNR	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.8	TenthdB	read-only	This object allows the manager to retrieve the FDC SNR value (1/10 dB).
U32 ocStbHostQpskAGC	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.9	Unsigned32	read-only	This object allows the manager to retrieve the OOB channel Automatic Gain Control value (%).
TEN ocStbHostQpskRDCPower	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.10	TenthdBmV	read-only	The power output level, in dBmV, of the QPSK transmitter.
INT ocStbHostQpskRDCDataRate	1.3.6.1.4.1.4491.2.3.1.1.1.2.8.11	INTEGER	read-only	The data rate (in kbps) of the RDC.
ocStbHostEasObjects	1.3.6.1.4.1.4491.2.3.1.1.1.3
ocStbHostEasCodes	1.3.6.1.4.1.4491.2.3.1.1.1.3.1
U32 ocStbEasMessageStateCode	1.3.6.1.4.1.4491.2.3.1.1.1.3.1.1	Unsigned32	read-only	This object allows the manager to retrieve the EAS State Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB does not discriminate any State Code defined in an EAS message.
U32 ocStbEasMessageCountyCode	1.3.6.1.4.1.4491.2.3.1.1.1.3.1.2	Unsigned32	read-only	This object allows the manager to retrieve the EAS County Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB ignores any County Code defined in an EAS message.
U32 ocStbEasMessageCountySubdivisionCode	1.3.6.1.4.1.4491.2.3.1.1.1.3.1.3	Unsigned32	read-only	This object allows the manager to retrieve the EAS County Sub Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB ignores it and any County Subdivision Code defined in an EAS message is accepted.
ocStbHostSecuritySubSystem	1.3.6.1.4.1.4491.2.3.1.1.2
STR ocStbHostSecurityIdentifier	1.3.6.1.4.1.4491.2.3.1.1.2.2	SnmpAdminString	read-only	The security identifier of the ocStbHost. This object represents the 40-bit Host_ID obtained from the Host x509 certificate.
STR ocStbHostCASystemIdentifier	1.3.6.1.4.1.4491.2.3.1.1.2.3	SnmpAdminString	read-only	Conditional access system identifier defined by DVB and MPEG. This object represents the 16-bit CA_system_id obtained from the ca_info_reply apdu. Only the first CAS ID value (16-bits) from ca_info()will be reported.
INT ocStbHostCAType	1.3.6.1.4.1.4491.2.3.1.1.2.4	INTEGER	read-only	The Conditional Access (CA) supported by the host device. 'other' means a CA which is not described by one of the other enumerations in this list. 'embedded' means a vendor-specific embedded CA 'cablecard' means OpenCable CableCARD is supported. 'dcas' means software downloadable CA is supported.
ocStbHostSoftware	1.3.6.1.4.1.4491.2.3.1.1.3
ocStbHostDeviceSoftwareBase	1.3.6.1.4.1.4491.2.3.1.1.3.1
STR ocStbHostSoftwareFirmwareVersion	1.3.6.1.4.1.4491.2.3.1.1.3.1.1	SnmpAdminString	read-only	The platform code software version currently operating in this device. This object should be in the syntax used by the individual vendor to identify software versions. The device must return a string descriptive of the current software load. This object is shared with docsDevSwCurrentVers. For a monolithic download image, this object has the same value as docsDevSwCurrentVers on the eCM.
STR ocStbHostSoftwareOCAPVersion	1.3.6.1.4.1.4491.2.3.1.1.3.1.2	SnmpAdminString	read-only	This object returns a string indicating the latest version of the OCAP profile supported by this device, e.g., '1.0'.
DAT ocStbHostSoftwareFirmwareReleaseDate	1.3.6.1.4.1.4491.2.3.1.1.3.1.3	DateAndTime	read-only	This object returns release date of this entire firmware image (the stack OS). The local time fields should be set to zero and the timezone information omitted.
STR ocStbHostSoftwareBootloaderVersion	1.3.6.1.4.1.4491.2.3.1.1.3.1.4	SnmpAdminString	read-only	The platform code bootloader version currently operating in this device. The bootloader is responsible for verifying and starting the platform code software. This object should be in the syntax used by the individual vendor to identify software versions. The device must return a string descriptive of the current software load.
ocStbHostFirmwareDownloadStatus	1.3.6.1.4.1.4491.2.3.1.1.3.2
INT ocStbHostFirmwareImageStatus	1.3.6.1.4.1.4491.2.3.1.1.3.2.1	INTEGER	read-only	This object details the image status recently downloaded 'imageAuthorized' means the image is valid. 'imageCorrupted' means the image is invalid. 'imageCertFailure' means CVC authentication has failed. 'imageMaxDownloadRetry' means the maximum number of code file download retries has been reached. When the value of this object is imageMaxDownloadRetry(4), the value of ocStbHostSoftwareCodeDownloadStatus must be downloadingFailed(3). 'imageMaxRebootRetry' means the maximum number of reboots has occurred after code file download.
INT ocStbHostFirmwareCodeDownloadStatus	1.3.6.1.4.1.4491.2.3.1.1.3.2.2	INTEGER	read-only	This object details the download status of the target image. 'downloadingComplete' means the image download was successful. 'downloadingFailed' means the image download failed. 'other' means a status not described by the other enumerations.
STR ocStbHostFirmwareCodeObjectName	1.3.6.1.4.1.4491.2.3.1.1.3.2.3	SnmpAdminString	read-only	The file name of the software image to be loaded into this device. This object value may optionally contain server and path information about the file name when applicable. If unknown, the string '(unknown)' is returned. This object is shared with docsDevSwFilename.
INT ocStbHostFirmwareDownloadFailedStatus	1.3.6.1.4.1.4491.2.3.1.1.3.2.4	INTEGER	read-only	This object details the firmware download failed status codes. cdlError1, No Failure cdlError2, Improper code file controls - CVC subject organizationName for manufacturer does not match the Host device manufacturer name cdlError3, Improper code file controls - CVC subject organizationName for code cosigning agent does not match the Host device current code cosigning agent. cdlError4, Improper code file controls - The manufacturer's PKCS #7 signingTime value is equal-to or less-than the codeAccessStart value currently held in the Host device. cdlError5, Improper code file controls - The manufacturer's PKCS #7 validity start time value is less-than the cvcAccessStart value currently held in the Host device. cdlError6, Improper code file controls - The manufacturer's CVC validity start time is less-than the cvcAccessStart value currently held in the Host device. cdlError7, Improper code file controls - The manufacturer's PKCS #7 signingTime value is less-than the CVC validity start time. cdlError8, Improper code file controls - Missing or improper extendedKeyUsage extension in the manufacturer CVC. cdlError9, Improper code file controls - The cosigner's PKCS #7 signingTime value is equal-to or less-than the codeAccessStart value currently held in the Host device. cdlError10, Improper code file controls - The cosigner's PKCS #7 validity start time value is less-than the cvcAccessStart value currently held in the Host device. cdlError11, Improper code file controls - The cosigner's CVC validity start time is less-than the cvcAccessStart value currently held in the Host device. cdlError12, Improper code file controls - The cosigner's PKCS #7 signingTime value is less-than the CVC validity start time. cdlError13, Improper code file controls - Missing or improper extended key-usage extension in the cosigner's CVC. cdlError14, Code file manufacturer CVC validation failure. cdlError15, Code file manufacturer CVS validation failure. cdlError16, Code file cosigner CVC validation failure. cdlError17, Code file cosigner CVS validation failure. cdlError18, Improper eCM configuration file CVC format (e.g., missing or improper key usage attribute). cdlError19, eCM configuration file CVC validation failure. cdlError20, Improper SNMP CVC format. cdlError21, CVC subject organizationName for manufacturer does not match the Host devices manufacturer name. cdlError22, CVC subject organizationName for code cosigning agent does not match the Host devices current code cosigning agent. cdlError23, The CVC validity start time is less-than or equal-to the corresponding subject's cvcAccessStart value currently held in the Host device. cdlError24, Missing or improper key usage attribute. cdlError25, SNMP CVC validation failure. cdlError99, Other errors. Errors that do not fall into the categories delineated above.
C32 ocStbHostFirmwareDownloadFailedCountEx	1.3.6.1.4.1.4491.2.3.1.1.3.2.5	Counter32	read-only	This object details the number of times the product attempted to download the firmware object defined by ocStbHostFirmwareCodeObjectName. The value is reset when the product attempts to download a new firmware object.
U32 ocStbHostFirmwareDownloadGroupId	1.3.6.1.4.1.4491.2.3.1.1.3.2.6	Unsigned32	read-write	This object specifies the Group Identifier. This is persistent. The host may initiate a download if the group identifier in the Common Download code version table matches this value. Downloads can be triggered using the Common Download code version table message for global upgrade of a group of similar hosts. The Group Identifier is the same a group_id used in [CDL2]
ocStbHostSoftwareApplicationInfo	1.3.6.1.4.1.4491.2.3.1.1.3.3
ocStbHostSoftwareApplicationInfoTable	1.3.6.1.4.1.4491.2.3.1.1.3.3.1		not-accessible	This table allows the manager to display and retrieve self-diagnostic software information of all available applications.
ocStbHostSoftwareApplicationInfoEntry	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1		not-accessible	An entry exists for each available application.
STR ocStbHostSoftwareAppNameString	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.1	SnmpAdminString	read-only	The application's name string.
STR ocStbHostSoftwareAppVersionNumber	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.2	SnmpAdminString	read-only	The application's version number.
INT ocStbHostSoftwareStatus	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.3	INTEGER	read-only	The software status of the application.
U32 ocStbHostSoftwareApplicationInfoIndex	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.4	Unsigned32	not-accessible	Table Index added in this position (4) because it replaced an external index.
OCT ocStbHostSoftwareOrganizationId	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.5	OCTET STRING	read-only	Organization ID captured in the XAIT or AIT.
OCT ocStbHostSoftwareApplicationId	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.6	OCTET STRING	read-only	This 16 bit field uniquely identifies the application function as assigned by the responsible/owning organization identified in ocStbHostSoftwareOrganizationId.
INT ocStbHostSoftwareApplicationSigStatus	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.7	INTEGER	read-only	This field has been replaced by the leaf objects ocStbHostSoftwareApplicationInfoSigLastReceivedTime and ocStbHostSoftwareApplicationInfoSigLastReadStatus.
U32 ocStbHostSoftwareApplicationPriority	1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.8	Unsigned32	read-only	This field represents the priority of the application as signaled in the AIT or XAIT. In those tables the value is 8 bits unsigned. The least significant 8 bits of this field is used to contain the priority value from signaling.
DAT ocStbHostSoftwareApplicationInfoSigLastReceivedTime	1.3.6.1.4.1.4491.2.3.1.1.3.3.2	DateAndTime	read-only	Indicates the last time an XAIT was received from the network that was not the same version as already in-use. If the host device has not received an XAIT, then this returns a date and time of all zeros. - This must be updated ONLY when an XAIT is received from the network (e.g., not when loaded from persistent storage). - This must NOT be updated if an XAIT is received that has a version the same as the currently in-use version, UNLESS the in-use XAIT was loaded from persistent storage AND it is the FIRST time receiving an XAIT from the network without error. - This must NOT be updated if XAIT is received with a status of error(2). - This must be updated each time an XAIT is received for resulting in a status of okayButRejected(3). - This must be updated if an XAIT is received from the network resulting in a status of okay(1) AND its version is different than the currently in-use version.
INT ocStbHostSoftwareApplicationInfoSigLastReadStatus	1.3.6.1.4.1.4491.2.3.1.1.3.3.3	INTEGER	read-only	Indicates the status of the last attempted read of the XAIT from the network that was not the same version as already in use except as noted below. Reports unknown(0) if no XAIT has been received. A value of okayButRejected means it was read without errors, but the monitor application has rejected it. - This must be updated ONLY when an XAIT is received from the network (e.g., not when loaded from persistent storage). - This must NOT be updated if an XAIT is received that has a version equal to the currently in-use version, UNLESS the in-use XAIT was loaded from persistent storage AND it is the FIRST time receiving an XAIT from the network without error. - The value of unknown(0) must be the initial value before any XAIT is ever received from the network. - This must NOT be set to unknown(0) if it has ever been set to another value.
I32 ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead	1.3.6.1.4.1.4491.2.3.1.1.3.3.4	Integer32	read-only	The version number of the XAIT that was last read successfully from the network, but not necessarily accepted by the monitor app. (LastReadStatus of okay or okayButRejected.) The version within the XAIT is a 5-bit unsigned integer (range 0..31), but if no XAIT has been read from the network, the value reported must be -1. (NOTE: Technically, each section has its own version number; however, they are required to all be the same, so this may be extracted from the first section.) If this is -1 and VersionInUse is not -1, it can be inferred that the version in use was loaded from persistent storage; however, if both versions are the same, it cannot be inferred that the initially used XAIT did not come from persistent storage.
I32 ocStbHostSoftwareApplicationInfoSigVersionInUse	1.3.6.1.4.1.4491.2.3.1.1.3.3.5	Integer32	read-only	The version number of the XAIT that is in use, which may have been read from the network or from persistent storage. The version within the XAIT is a 5-bit unsigned integer (range 0..31), but if no XAIT has been read from the network, the value reported must be -1. (NOTE: Technically, each section has its own version number; however, they are required to all be the same, so this may be extracted from the first section.) If this is not -1 and LastVersionHeard is -1, it can be inferred that the version in use was loaded from persistent storage; however, if both versions are the same, it cannot be inferred that the initially used XAIT did not come from persistent storage.
ocStbHostStatus	1.3.6.1.4.1.4491.2.3.1.1.4
ocStbHostPower	1.3.6.1.4.1.4491.2.3.1.1.4.1
INT ocStbHostPowerStatus	1.3.6.1.4.1.4491.2.3.1.1.4.1.1	INTEGER	read-only	Indicates the current power status of the ocStbHost.
INT ocStbHostAcOutletStatus	1.3.6.1.4.1.4491.2.3.1.1.4.1.2	INTEGER	read-only	Indicates the AC accessory power outlet status of the ocStbHost. 'unSwitched' Indicates AC accessory power outlet is present and provides power as long as the ocStbHost is connected to a powered AC outlet. 'switchedOn' Indicates the AC accessory power outlet is currently switched to ON and provides power as long as the value of ocStbHostPowerStatus is 'powerOn'. 'switchedOff' Indicates the AC accessory power outlet is currently switched to OFF and does not provide power. 'notInstalled' Indicates no AC accessory power outlet is present in the ocStbHost.
ocStbHostUserSettings	1.3.6.1.4.1.4491.2.3.1.1.4.2
STR ocStbHostUserSettingsPreferedLanguage	1.3.6.1.4.1.4491.2.3.1.1.4.2.1	DisplayString	read-only	The preferred language of the audio streams indicated as the 3-octet code specified in ISO 639-2.
ocStbHostSystemObjects	1.3.6.1.4.1.4491.2.3.1.1.4.3
ocStbHostSystemTempTable	1.3.6.1.4.1.4491.2.3.1.1.4.3.1		not-accessible	This table contains the temperature sensors of the ocStbHost.
ocStbHostSystemTempEntry	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1		not-accessible	Conceptual row of a temperature sensor device associated with a Host Resource device (e.g. DVR) of the ocStbHost.
U32 ocStbHostSystemTempIndex	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.1	Unsigned32	not-accessible	The identifier of the temperature sensor for the corresponding hrDeviceIdx.
STR ocStbHostSystemTempDescr	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.2	SnmpAdminString	read-only	The text containing information about the temperature sensor.
I32 ocStbHostSystemTempValue	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.3	Integer32	read-only	The temperature measured by the sensor. If the temperature sensor does not report a value, this object indicates a value of 0.
TIM ocStbHostSystemTempLastUpdate	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.4	TimeStamp	read-only	The value of sysUpTime of the last time this value was measured by the ocStbHost. A value 0 means the temperature value is invalid.
I32 ocStbHostSystemTempMaxValue	1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.5	Integer32	read-only	The maximum temperature measured by the sensor. If the temperature sensor does not report a value, this object indicates a value of 0.
ocStbHostSystemHomeNetworkTable	1.3.6.1.4.1.4491.2.3.1.1.4.3.2		not-accessible	This table contains info about Home Network Clients connected to the ocStbHost.
ocStbHostSystemHomeNetworkEntry	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1		not-accessible	Conceptual row of a Home Network device ocStbHost support/status.
U32 ocStbHostSystemHomeNetworkIndex	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.1	Unsigned32	not-accessible	The identifier of the Home network Client connected to the ocStbHost.
I32 ocStbHostSystemHomeNetworkMaxClients	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.2	Integer32	read-only	Maximum number of clients the Host can support. NOTE: If the Host does not support home network clients, then it SHALL report 0x00.
INT ocStbHostSystemHomeNetworkHostDRMStatus	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.3	INTEGER	read-only	The ocStbHost support for Digital Right Management (DRM).
I32 ocStbHostSystemHomeNetworkConnectedClients	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.4	Integer32	read-only	The number of Home Network Clients currently connected to the ocStbHost.
MAC ocStbHostSystemHomeNetworkClientMacAddress	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.5	MacAddress	read-only	The MAC address of Home Network Client.
IP ocStbHostSystemHomeNetworkClientIpAddress	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.6	InetAddress	read-only	The Ip address of Home Network Client.
I32 ocStbHostSystemHomeNetworkClientDRMStatus	1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.7	Integer32	read-only	The Home Network Clients support for Digital Rights Management (DRM).
ocStbHostSystemMemoryReportTable	1.3.6.1.4.1.4491.2.3.1.1.4.3.3		not-accessible	This table contains the Id of each memory type reported by the ocStbHost.
ocStbHostSystemMemoryReportEntry	1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1		not-accessible	Conceptual row of a memory type reported by the ocStbHost.
U32 ocStbHostSystemMemoryReportIndex	1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.1	Unsigned32	not-accessible	The identifier of the memory type.
INT ocStbHostSystemMemoryReportMemoryType	1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.2	INTEGER	read-only	Designates the type of memory that is being reported.
I32 ocStbHostSystemMemoryReportMemorySize	1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.3	Integer32	read-only	Designates the physical size of the reported memory type. The units are kilobytes, defined to be 1,024 bytes.
ocStbHostSystemDriveInfoTable	1.3.6.1.4.1.4491.2.3.1.1.4.3.4		not-accessible	This table contains information about each storage device that is not an onboard storage such as DRAM. This table is optional unless a solid state drive is present, e.g., USB Flash Drive. When a solid state drive is present this table SHALL include an entry describing the drive. Presence of a solid state drive is determined by the ocStbHostSystemMemoryReportMemoryType value.
ocStbHostSystemDriveInfoEntry	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1		not-accessible	Conceptual row of a drive info reported by the ocStbHost.
I32 ocStbHostSystemDriveInfoIndex	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.1	Integer32	read-only	An index that is unique for each drive info entry.
STR ocStbHostSystemDriveInfoVendorId	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.2	SnmpAdminString	read-only	A string representing the drive vendor identifier. If a vendor identifier cannot be read from the drive then the value of 'unknown' SHALL be used for this value.
STR ocStbHostSystemDriveInfoProductId	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.3	SnmpAdminString	read-only	A string representing the drive product identifier. If a Product identifier cannot be read from the drive, then the value of 'unknown' SHALL be used for this value.
STR ocStbHostSystemDriveInfoSerialNumber	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.4	SnmpAdminString	read-only	A string representing the serial number. If a serial number cannot be read from the drive, then the value of 'unknown' SHALL be used for this value.
INT ocStbHostSystemDriveInfoInterfaceType	1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.5	INTEGER	read-only	Designates the type of drive interface.
ocStbHostSystemLogging	1.3.6.1.4.1.4491.2.3.1.1.4.3.5
INT ocStbHostSystemLoggingControlReset	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.1	INTEGER	read-write	Setting this object to resetLog(1) empties the logging table. Setting this object to pauseLog(2) causes the Host to stop writing events to the logging table. Setting this object to startLog(3) causes the Host to start writing events to the logging table. Reading this object returns either pauseLog(2) or startLog(3). The default is startLog(3). Log event pausing is independent of any other log filtering mechanisms, e.g., levels. Setting it to useDefaultReporting(4) resets the log (i.e., empties) and returns all event levels to the factory-default reporting.
INT ocStbHostSystemLoggingSize	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.2	INTEGER	read-write	Setting this object modifies the size of the system logging table. When set to zero, all entries are removed and new entries are not allowed to be added. When set less than the current size, the oldest entries are removed until the new size is reached.
INT ocStbHostSystemLoggingLevelControl	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.3	INTEGER	read-write	The current logging priority level for system messages. Setting a level sets all levels from the level specified to the highest severity level except for OFF. The level ALL indicates all levels. The log levels are derived from the log4j class. all(1) The all level has the lowest possible rank and is intended to turn on all logging. trace(2) The trace level designates finer-grained informational events than the DEBUG (see log4j class for further definition). debug(3) The debug level designates fine-grained informational events that are most useful to debug an application. info(4) The info level designates informational messages that highlight the progress of the application at coarse-grained level. warn(5) The warn level designates potentially harmful situations. error(6) The error level designates error events that might still allow the application to continue running. fatal(7) The fatal level designates very severe error events that will presumably lead the application to abort. off(8) The off has the highest possible rank and is intended to turn off logging.
BIT ocStbHostSystemloggingGroupControl	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.4	Bits	read-write	The system 'group' or 'groups' to be logged. If all(1) is set, then other bits are ignored. If set to 'none(0)', messages that do not include a 'group' are candidates to be logged.
ocStbHostSystemLoggingEventTable	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5		not-accessible	This table is a cyclic table of events.
ocStbHostSystemLoggingEventEntry	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1		not-accessible	A logging event entry.
I32 ocStbHostSystemLoggingEventIndex	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.1	Integer32	not-accessible	Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via ocStbHostSystemLoggingEventControlReset, (b) the device reboots and does not implement non-volatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1.
OCT ocStbHostSystemLoggingEventTimeStamp	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.2	OCTET STRING	read-only	The time stamp of this event logging entry. The timestamp is established when the event occurs. The value is the number of milli-seconds from Jan 1 1970 converted to a string.
STR ocStbHostSystemLoggingEventMessage	1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.3	SnmpAdminString	read-only	The event message.
ocStbCardInfo	1.3.6.1.4.1.4491.2.3.1.1.4.4
MAC ocStbHostCardMacAddress	1.3.6.1.4.1.4491.2.3.1.1.4.4.1	MacAddress	read-only	The Mac Address associated with the Card.
IPt ocStbHostCardIpAddressType	1.3.6.1.4.1.4491.2.3.1.1.4.4.2	InetAddressType	read-only	The network address Type of ocStbHostCardIpAddress. If the Host does not have the Card's IP address (e.g., the Card has not opened an IP Unicast Flow, which would require the Host to obtain the Card's IP address, thus providing the Host with knowledge of the Card's IP address type), then the Host replies with a value of unknown (0).
IP ocStbHostCardIpAddress	1.3.6.1.4.1.4491.2.3.1.1.4.4.3	InetAddress	read-only	The network address of the Card. If the Host does not have the Card's IP address (e.g., the Card has not opened an IP Unicast Flow, which would require the Host to obtain the Card's IP address, thus providing the Host with knowledge of the Card's IP address), then the Host replies with a value of zero (00).
ocStbHostCCMMI	1.3.6.1.4.1.4491.2.3.1.1.4.4.5
ocStbHostCCApplications	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1
ocStbHostCCAppInfoTable	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1		not-accessible	This table allows the manager to retrieve the HTML pages for Card applications retrieved by the Host using the Application Info resource.
ocStbHostCCAppInfoEntry	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1		not-accessible	The conceptual row for this table.
U32 ocStbHostCCAppInfoIndex	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.1	Unsigned32	read-only	This object was the index for this table in a previous version of the MIB. Currently used only as a placeholder to avoid changing OID values.
U32 ocStbHostCCApplicationType	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.2	Unsigned32	read-only	Index for this table. Contains the application_type field in the application_info_cnf() APDU.
STR ocStbHostCCApplicationName	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.3	SnmpAdminString	read-only	Contains the application name.
U32 ocStbHostCCApplicationVersion	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.4	Unsigned32	read-only	Contains the application version.
OCT ocStbHostCCAppInfoPage	1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.5	OCTET STRING	read-only	All HTML data for this application. If a 'page' as reported from the Card contains links, the links shall be traversed, and all HTML from each page traversed shall be included in a single, valid HTML string (with per-page start/end HTML and BODY tags removed). The resulting HTML SHOULD be structured as an HTML table consisting of one column, with one row for each 'page' from the Card. If the full HTML from the application (all pages concatenated) will not fit within the SNMP buffer, text indicating this SHALL follow the table; otherwise nothing except the close BODY and HTML tags SHOULD follow the table.
ocStbHostSnmpProxyInfo	1.3.6.1.4.1.4491.2.3.1.1.4.4.6
OCT ocStbHostCardMfgId	1.3.6.1.4.1.4491.2.3.1.1.4.4.6.1	OCTET STRING	read-only	The two-byte manufacturer identifier acquired from the CableCard. The high order byte defines the manufacturer as follows. 00xx = Motorola 01xx = Cisco (Scientific-Atlanta) 02xx = NDS 03xx = Conax 04xx = Nagravision This can be used with version and root OID to enable SNMP access to proprietary CC diagnostic information. The lower order octet can be used to privately identify product generation and derivatives.
OCT ocStbHostCardVersion	1.3.6.1.4.1.4491.2.3.1.1.4.4.6.2	OCTET STRING	read-only	The version of the CableCard. This can be used with manufacturer and root OID to enable SNMP access to proprietary diagnostic information.
OID ocStbHostCardRootOid	1.3.6.1.4.1.4491.2.3.1.1.4.4.6.3	OBJECT IDENTIFIER	read-only	An ASN.1 encoding of the root OID of the CableCARD MIB defined in the CC Manufacturers private MIB name space. This OID will be compared against each object identifier in the VARBIND contained within the GetRequests, GetNextRequests, GetBulkRequests, and SetRequests received by the Host2.x if the objects are not in the Host2.x MIB. A match of OIDs root requires the Host to send a corresponding request to the Card. A 0.0 value explicitly states the Card does not support SNMP message processing.
STR ocStbHostCardSerialNumber	1.3.6.1.4.1.4491.2.3.1.1.4.4.6.4	SnmpAdminString	read-only	Serial Number of CableCARD.
T/F ocStbHostCardSnmpAccessControl	1.3.6.1.4.1.4491.2.3.1.1.4.4.6.5	TruthValue	read-write	This object allows the manager to control access to the Card's MIB via networked devices (e.g., get/set by network attached managers). It has no impact on local access (e.g., application get/set of Card MIB objects). When set to TRUE, the Host is permitted to forward SNMP messages received on the WAN/LAN interface addressed to the OID of the Card subtree. When set to FALSE, the Host must discard and not forward to the Card any SNMP messages received on the WAN/LAN interface addressed to the OID of the Card subtree. Default of this object is TRUE.
STR ocStbHostCardId	1.3.6.1.4.1.4491.2.3.1.1.4.4.7	DisplayString	read-only	Allows the manager to retrieve the 40 least-significant Bits of the CableCARD ID in the string format indicated below: M-MMU-UUU-UUU-UUL Where: M-MM is the decimal representation of the 10-bit CHICA assigned manufacturer number. U-UUU-UUU-UU is the decimal representation of the 30-bit manufacturer assigned unit number. L is a Luhn check digit calculated over the preceding 12 decimal digits. If the Card ID is unknown, then the string shall be all zeros e.g., '0-000-000-000-000'.
INT ocStbHostCardBindingStatus	1.3.6.1.4.1.4491.2.3.1.1.4.4.8	INTEGER	read-only	The status of CableCARD/Host mutual authentication and binding. 'unknown' means the binding state has not been determined. For example, mutual authentication may not have commenced or may be in process. 'invalidCertificate' means the Host failed to establish device certificate authenticity. 'otherAuthFailure' corresponds to other failures in establishing mutual authentication. 'bound' indicates that mutual authentication has succeeded and CableCARD and Host are bound successfully.
OCT ocStbHostCardOpenedGenericResource	1.3.6.1.4.1.4491.2.3.1.1.4.4.9	OCTET STRING	read-only	The hexadecimal representation of the generic feature control resource number opened using a profile reply() APDU resource_identifier field. The possible values are defined in the [CCIF] specification.
INT ocStbHostCardTimeZoneOffset	1.3.6.1.4.1.4491.2.3.1.1.4.4.10	INTEGER	read-only	Decimal value of the UTC offset taken from the feature_parameters() APDU for feature_id =5 where possible values are defined in the [CCIF] specification.
OCT ocStbHostCardDaylightSavingsTimeDelta	1.3.6.1.4.1.4491.2.3.1.1.4.4.11	OCTET STRING	read-only	Decimal value of the daylight savings delta. A 0x00 should be returned if the Card does not support this feature or if there is no delta. The ambiguity may be resolved by querying ocStbHostCardDaylightSavingsTimeEntry object.
U32 ocStbHostCardDaylightSavingsTimeEntry	1.3.6.1.4.1.4491.2.3.1.1.4.4.12	Unsigned32	read-only	Daylight savings entry time given as time lapsed since 12 AM Jan 6, 1980, in units of GPS seconds. All zeros should be returned if the Card does not support this feature.
U32 ocStbHostCardDaylightSavingsTimeExit	1.3.6.1.4.1.4491.2.3.1.1.4.4.13	Unsigned32	read-only	Daylight savings exit time given as time lapsed since 12 AM Jan 6, 1980, in units of GPS seconds. All zeros should be returned if the Card does not support this feature.
OCT ocStbHostCardEaLocationCode	1.3.6.1.4.1.4491.2.3.1.1.4.4.14	OCTET STRING	read-only	Contains the EA location codes as defined in American National Standard, J-STD-042. The bits corresponding to ANSI EA location codes are indicated below: SSSSSSSS-DDDD-xx-CCCCCCCCCC Where: SSSSSSSS is An 8-bit unsigned number in the range 0 to 99 that represents the State or Territory affected by the emergency alert. DDDD is A 4-bit number in the range 0 to 9 that defines county subdivisions. xx is reserved CCCCCCCCCC is 10-bit number between 0 to 999 that identifies a county within a state. If the EA_Location code is unknown, then the string shall be all zeros e.g., '000000'.
OCT ocStbHostCardVctId	1.3.6.1.4.1.4491.2.3.1.1.4.4.15	OCTET STRING	read-only	Display the VTC-ID if supported. If not supported then return 0x0000.
ocStbHostCardCpInfo	1.3.6.1.4.1.4491.2.3.1.1.4.4.16
INT ocStbHostCardCpAuthKeyStatus	1.3.6.1.4.1.4491.2.3.1.1.4.4.16.1	INTEGER	read-only	This parameter SHALL be set to 'Ready' if the Card has requested the host's authentication key via the APDU CP_data_req() with a Datatype_id = 22. This parameter SHALL be set to 'Not Ready' if the Cablecard has NOT requested the authentication key.
INT ocStbHostCardCpCertificateCheck	1.3.6.1.4.1.4491.2.3.1.1.4.4.16.2	INTEGER	read-only	Display the results of the Card_DevCert verification as defined in the OpenCable CableCard Copy Protection Specification.
C32 ocStbHostCardCpCciChallengeCount	1.3.6.1.4.1.4491.2.3.1.1.4.4.16.3	Counter32	read-only	Display the Card CCI Challenge message count [CCCP] since the last boot or reset.
C32 ocStbHostCardCpKeyGenerationReqCount	1.3.6.1.4.1.4491.2.3.1.1.4.4.16.4	Counter32	read-only	Display the Copy Protection Key Generation Request count [CCCP] since the last boot or reset.
OCT ocStbHostCardCpIdList	1.3.6.1.4.1.4491.2.3.1.1.4.4.16.5	OCTET STRING	read-only	Display the CP_system_id_bitmask field of the APDU CP_open_cnf() as defined in the CableCARD Copy Protection Specification Section 11.3.1.2.
ocStbHostInfo	1.3.6.1.4.1.4491.2.3.1.1.4.5
IPt ocStbHostIpAddressType	1.3.6.1.4.1.4491.2.3.1.1.4.5.1	InetAddressType	read-only	This object was the address type for ocStbHostIpAddress, which was never implemented in a previous version of the MIB. Currently used only as a placeholder to avoid changing OID values.
IP ocStbHostIpSubNetMask	1.3.6.1.4.1.4491.2.3.1.1.4.5.2	InetAddress	read-only	The IP subnet mask of the Host address.
INT ocStbHostOobMessageMode	1.3.6.1.4.1.4491.2.3.1.1.4.5.3	INTEGER	read-only	Out of Band Messaging communications mode currently employed by the Host2.x.
ocStbHostDumpTrapInfo	1.3.6.1.4.1.4491.2.3.1.1.4.5.4
INT ocStbHostDumpEventCount	1.3.6.1.4.1.4491.2.3.1.1.4.5.4.1	INTEGER	read-write	The number of times the host should notify the headend(s) of a dump condition (e.g., stack dumps after boot). When an exception occurs, if ocStbHostDumpEventCount is non-zero, the host will send the notification to each defined notification receiver and decrement ocStbHostDumpEventCount. A non-zero count arms the trap. No trap will be sent if the value is 0.
T/F ocStbHostDumpNow	1.3.6.1.4.1.4491.2.3.1.1.4.5.4.2	TruthValue	read-write	True(1) forces an immediate dump of a component of the Host. The Host will prepare the dump file then send the Notification-PDU to the headend. This simulates the manufacturer-defined event that would cause a dump. Reading this object returns false(2).
U32 ocStbHostDumpEventTimeout	1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3	Unsigned32	read-write	The time, in seconds, after a SNMPv2-Trap-PDU has been sent to the headend that the Host will wait before abandoning the dump transfer. If the Host does not receive a TFTP Get from the headend within this timeout period, it will proceed with the manufacturer-defined recovery process from the condition that caused the dump. The intent is to prevent the Host from waiting indefinitely for a TFTP session to enable the dump transfer. The timer should be ignored if the Host receives a TFTP GET from the headend within the timeout period. The default timeout value is 5 seconds.
STR ocStbHostDumpFilePath	1.3.6.1.4.1.4491.2.3.1.1.4.5.4.4	SnmpAdminString	read-only	Dump file path and name.
ocStbHostSpecificationsInfo	1.3.6.1.4.1.4491.2.3.1.1.4.5.5
STR ocStbHostCfrSpecificationIssue	1.3.6.1.4.1.4491.2.3.1.1.4.5.5.1	SnmpAdminString	read-only	The Host CFR version implemented in this device (e.g., OC-SP-HOST2.1-CFR-I06-081114).
STR ocStbHostMibSpecificationIssue	1.3.6.1.4.1.4491.2.3.1.1.4.5.5.2	SnmpAdminString	read-only	The version implemented in this device (e.g., OC-SP-MIB-HOST2.X-I05-081114).
INT ocStbHostBootStatus	1.3.6.1.4.1.4491.2.3.1.1.4.5.6	INTEGER	read-only	Defines the current status of the host during or after boot process.
ocStbHostContentErrorSummaryInfo	1.3.6.1.4.1.4491.2.3.1.1.4.5.7
C32 ocStbHostPatTimeoutCount	1.3.6.1.4.1.4491.2.3.1.1.4.5.7.1	Counter32	read-write	These values increment every time a PAT timeout condition has occurred since the last boot or reset.
C32 ocStbHostPmtTimeoutCount	1.3.6.1.4.1.4491.2.3.1.1.4.5.7.2	Counter32	read-write	These values increment every time a PMT timeout condition has occurred since the last boot or reset.
C32 ocStbHostOobCarouselTimeoutCount	1.3.6.1.4.1.4491.2.3.1.1.4.5.7.3	Counter32	read-write	These values increment each time an implementation specific OOB Carousel timeout has occurred since the last boot or reset.
C32 ocStbHostInbandCarouselTimeoutCount	1.3.6.1.4.1.4491.2.3.1.1.4.5.7.4	Counter32	read-write	These values increment each time an implementation specific Inband Carousel timeout has occurred since the last boot or reset.
ocStbHostRebootInfo	1.3.6.1.4.1.4491.2.3.1.1.4.6
INT ocStbHostRebootType	1.3.6.1.4.1.4491.2.3.1.1.4.6.1	INTEGER	read-only	Describes the type of reboot that occurred the last time the host device rebooted. Unknown(0), unknown reboot. 0 is used as a sentinel value to denote that the reboot reporting mechanism is initialized and ready for use. If it appears in a reboot report as a reboot reason, it means that something (of unknown cause) prevented a reboot reason from being saved. This is a spontaneous reboot. Davic/DOCSIS(1), Davic/DOCSIS switch. The set-top rebooted because the network switched from Davic to DOCSIS or vice versa. This is a controlled reboot. User(2), User reboot. The set-top rebooted at the specific request of the user, typically the MSO, but can also be the subscriber. Includes, but not limited to, headend-initiated reboots, pass-thru and SNMP messages to reboot, new application versions that require a reboot in order to reload, the staging toolkit, hard disk re-format requests, CableCARD inserted or firmware upgrade, and more. This is a controlled reboot. System(3), System reboot. The set-top rebooted because its software determined it cannot continue operation. This can be due to any number of reasons, including: detection of logic errors, exhaustion of various system resources, detection of memory corruption, and more. This is a spontaneous reboot. Trap(4), Trap reboot. A fatal error detected by the CPU. This varies between CPU manufacturers; some possible causes are illegal address references, misaligned instruction or data access, memory protection violations, attempt to decode an unrecognized instruction, etc. This is a spontaneous reboot. Silent or Watchdog(5). Depending on platform, this is either a Silent Reboot (A reboot of unknown origin that reports no information) or a Watchdog reboot. This is a spontaneous reboot. Bootloader(6), Bootloader reboot. For use by bootloader software. This is a spontaneous reboot. PowerUp(7), Power-up reboot. The set-top rebooted because power was lost and then restored. This is a controlled reboot. Upgrade(8), Upgrade Reboot due to loading new resident set-top software. This is a controlled reboot. Hardware(9), Hardware Reset reboot. This depends on the design of a particular set-top. It might be due to a hardware reset line being triggered or by a button push of some kind. Manufacturers sometimes provide a way to hard reset a box besides removing power. This is a spontaneous reboot. CablecardError(10), CablecardError. The Host rebooted because the communication with the CableCARD was lost and could not be reestablished.
T/F ocStbHostRebootReset	1.3.6.1.4.1.4491.2.3.1.1.4.6.2	TruthValue	read-write	Setting this object to true(1) causes the device to reset, equivalent to a power reset. Reading this object always returns false(2).
INT ocStbHostRebootIpModeTlvChange	1.3.6.1.4.1.4491.2.3.1.1.4.6.3	INTEGER	read-write	Setting this object to ignore(1) causes the eSTB to ignore the IP mode TLV when received during normal operation (e.g., when only the eCM is reset). The operator can then schedule a Host reset at a less disruptive time. When set to immediate(2), an IP Mode TLV change will result in an immediate reset and disrupt all current Host activity. The value of this object is persistent.
ocStbHostMemoryInfo	1.3.6.1.4.1.4491.2.3.1.1.4.7
I32 ocStbHostLargestAvailableBlock	1.3.6.1.4.1.4491.2.3.1.1.4.7.1	Integer32	read-only	The largest available continuous block of DRAM available on the host device, in kilobytes.
I32 ocStbHostTotalVideoMemory	1.3.6.1.4.1.4491.2.3.1.1.4.7.2	Integer32	read-only	The total amount of DRAM dedicated to video decoding and display on the host device, in kilobytes.
I32 ocStbHostAvailableVideoMemory	1.3.6.1.4.1.4491.2.3.1.1.4.7.3	Integer32	read-only	The total amount of DRAM dedicated to video decoding and display on the host device that is not allocated and available for use, in kilobytes.
I32 ocStbHostTotalSystemMemory	1.3.6.1.4.1.4491.2.3.1.1.4.7.4	Integer32	read-only	The total amount of DRAM dedicated to system use, in kilobytes. System memory does not include video memory or any JVM memory including heap, thread stack, etc.
I32 ocStbHostAvailableSystemMemory	1.3.6.1.4.1.4491.2.3.1.1.4.7.5	Integer32	read-only	The total amount of DRAM dedicated to system use that is not allocated and available for use, in kilobytes.
ocStbHostJVMInfo	1.3.6.1.4.1.4491.2.3.1.1.4.8
I32 ocStbHostJVMHeapSize	1.3.6.1.4.1.4491.2.3.1.1.4.8.1	Integer32	read-only	The total amount of DRAM allocated to the Java Virtual Machine heap. The units are kilobytes, defined to be 1,024 bytes.
I32 ocStbHostJVMAvailHeap	1.3.6.1.4.1.4491.2.3.1.1.4.8.2	Integer32	read-only	The amount of DRAM in the Java Virtual Machine heap that is not allocated and is available for use. The units are kilobytes, defined to be 1,024 bytes.
I32 ocStbHostJVMLiveObjects	1.3.6.1.4.1.4491.2.3.1.1.4.8.3	Integer32	read-only	The number of active object instances in the Java Virtual Machine that are reachable from running code.
I32 ocStbHostJVMDeadObjects	1.3.6.1.4.1.4491.2.3.1.1.4.8.4	Integer32	read-only	The number of object instances in the Java Virtual Machine that are NOT reachable from running Code.
ocStbHostConformance	1.3.6.1.4.1.4491.2.3.1.2
ocStbHostMIBCompliances	1.3.6.1.4.1.4491.2.3.1.2.1
ocStbHostMIBCompliance	1.3.6.1.4.1.4491.2.3.1.2.1.1			The requirements for conformance to the OpenCable Set-top HOST MIB.
ocStbHostMIBGroups	1.3.6.1.4.1.4491.2.3.1.2.2
ocStbHostSystemGroup	1.3.6.1.4.1.4491.2.3.1.2.2.1			Defines the objects contained with the ocStbHost System Group.
ocStbHostSoftwareGroup	1.3.6.1.4.1.4491.2.3.1.2.2.2			The ocStbHost Software group.
ocStbHostStatusGroup	1.3.6.1.4.1.4491.2.3.1.2.2.3			The object group related to multiple ocStbHost status.
ocStbHostSecuritySubSystemGroup	1.3.6.1.4.1.4491.2.3.1.2.2.4			The ocStbHost Security Subsystem group.
ocStbHostDeprecatedGroup	1.3.6.1.4.1.4491.2.3.1.2.2.5			Group of objects deprecated.
ocStbHostNotificationGroup	1.3.6.1.4.1.4491.2.3.1.2.2.6			Defines the objects contained with the ocStbHost System Group.

RFC description

OpenCable Set-top Host device management including software, hardware, memory, and application information.

Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OC-STB-HOST-MIB