All MIBs › OC-STB-HOST-MIB › ocStbHostDumpEventTimeout
ocStbHostDumpEventTimeout
Module: OC-STB-HOST-MIB
OID (symbolic): OC-STB-HOST-MIB::ocStbHostDumpEventTimeout
OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The time, in seconds, after a SNMPv2-Trap-PDU has been sent to the headend that the Host will wait before abandoning the dump transfer. If the Host does not receive a TFTP Get from the headend within this timeout period, it will proceed with the manufacturer-defined recovery process from the condition that caused the dump. The intent is to prevent the Host from waiting indefinitely for a TFTP session to enable the dump transfer. The timer should be ignored if the Host receives a TFTP GET from the headend within the timeout period. The default timeout value is 5 seconds.
What is ocStbHostDumpEventTimeout?
Sets how many seconds (1-120, default 5) the Host waits after sending a dump notification trap for the headend to begin a TFTP GET of the dump file before giving up and proceeding with its normal fault-recovery process, preventing the box from hanging indefinitely waiting on a TFTP session that never starts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3 snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostDumpEventTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3.1 snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostDumpEventTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3.1 i <value>
Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostDumpEventTimeout OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.3 | clabProjOpenCable | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.3.1 | ocStbHostMibModule | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1 | ocStbHostMibObjects | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.4 | ocStbHostStatus | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5 | ocStbHostInfo | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4 | ocStbHostDumpTrapInfo | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3 | ocStbHostDumpEventTimeout | OC-STB-HOST-MIB |