OC-STB-HOST-MIB :: ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › OC-STB-HOST-MIB › ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead

ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead

Module: OC-STB-HOST-MIB

OID (symbolic): OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead

OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.3.3.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The version number of the XAIT that was last read successfully from the network, but not necessarily accepted by the monitor app. (LastReadStatus of okay or okayButRejected.) The version within the XAIT is a 5-bit unsigned integer (range 0..31), but if no XAIT has been read from the network, the value reported must be -1. (NOTE: Technically, each section has its own version number; however, they are required to all be the same, so this may be extracted from the first section.) If this is -1 and VersionInUse is not -1, it can be inferred that the version in use was loaded from persistent storage; however, if both versions are the same, it cannot be inferred that the initially used XAIT did not come from persistent storage.

What is ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead?

Reports the version number (0-31) of the last XAIT successfully read from the network, regardless of whether the monitor app accepted it; -1 means no XAIT has ever been read from the network, which per the description can imply the version currently in use was instead loaded from persistent storage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.3.3.4
snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.3.3.4.1
snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead.1

Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.3clabProjOpenCableCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.3.1ocStbHostMibModuleOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1ocStbHostMibObjectsOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.3ocStbHostSoftwareOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.3.3ocStbHostSoftwareApplicationInfoOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.3.3.4ocStbHostSoftwareApplicationInfoSigLastNetworkVersionReadOC-STB-HOST-MIB