All MIBs › OC-STB-HOST-MIB › ocStbHostSoftwareApplicationInfoSigVersionInUse
ocStbHostSoftwareApplicationInfoSigVersionInUse
Module: OC-STB-HOST-MIB
OID (symbolic): OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigVersionInUse
OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.3.3.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The version number of the XAIT that is in use, which may have been read from the network or from persistent storage. The version within the XAIT is a 5-bit unsigned integer (range 0..31), but if no XAIT has been read from the network, the value reported must be -1. (NOTE: Technically, each section has its own version number; however, they are required to all be the same, so this may be extracted from the first section.) If this is not -1 and LastVersionHeard is -1, it can be inferred that the version in use was loaded from persistent storage; however, if both versions are the same, it cannot be inferred that the initially used XAIT did not come from persistent storage.
What is ocStbHostSoftwareApplicationInfoSigVersionInUse?
Reports the version number (0-31) of the XAIT the device is currently operating under, whether it came from the network or from persistent storage; -1 means no XAIT has ever been read from the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.3.3.5 snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigVersionInUse
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.3.3.5.1 snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigVersionInUse.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ocStbHostSoftwareApplicationInfoSigVersionInUse.1
Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostSoftwareApplicationInfoSigVersionInUse OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.3 | clabProjOpenCable | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.3.1 | ocStbHostMibModule | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1 | ocStbHostMibObjects | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.3 | ocStbHostSoftware | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3 | ocStbHostSoftwareApplicationInfo | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.5 | ocStbHostSoftwareApplicationInfoSigVersionInUse | OC-STB-HOST-MIB |