All MIBs › OC-STB-HOST-MIB › ocStbHostProgramAVDestination
ocStbHostProgramAVDestination
Module: OC-STB-HOST-MIB
OID (symbolic): OC-STB-HOST-MIB::ocStbHostProgramAVDestination
OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3
Node type: OBJECT-TYPE
Type: RowPointer
Access: read-only
Description: Defines the destination interface associated with this entry. Example destinations are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a Host Resource Device such as a DVR. If the destination corresponds to an entry in the ocStbAVInterfaceTable, this object reports the ocStbAVInterfaceType instance of the destination interface. If the destination corresponds to an interface listed in the ifTable, this object reports the ifIndex instance of the destination interface. If the destination corresponds to a resource listed in the hrDeviceTable, this object reports the hrDeviceType instance of the destination interface. Other table rows may be designated by this object as appropriate to the particular destination.
What is ocStbHostProgramAVDestination?
A RowPointer identifying the destination interface this program status entry's A/V signal is being sent to, following the same ifTable/ocStbAVInterfaceTable/hrDeviceTable conventions as ocStbHostProgramAVSource but for the output side instead of the source.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3 snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostProgramAVDestination
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3.1 snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostProgramAVDestination.1
Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostProgramAVDestination OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.3 | clabProjOpenCable | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.3.1 | ocStbHostMibModule | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1 | ocStbHostMibObjects | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1 | ocStbHostSystem | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2 | ocStbHostInterfaces | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7 | ocStbHostServiceProgramInfo | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2 | ocStbHostProgramStatusTable | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1 | ocStbHostProgramStatusEntry | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3 | ocStbHostProgramAVDestination | OC-STB-HOST-MIB |