OC-STB-HOST-MIB :: ocStbHostCardEaLocationCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › OC-STB-HOST-MIB › ocStbHostCardEaLocationCode

ocStbHostCardEaLocationCode

Module: OC-STB-HOST-MIB

OID (symbolic): OC-STB-HOST-MIB::ocStbHostCardEaLocationCode

OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.4.4.14

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: Contains the EA location codes as defined in American National Standard, J-STD-042. The bits corresponding to ANSI EA location codes are indicated below:

SSSSSSSS-DDDD-xx-CCCCCCCCCC

Where:

SSSSSSSS is An 8-bit unsigned number in the range 0 to 99 that represents the State or Territory affected by the emergency alert.

DDDD is A 4-bit number in the range 0 to 9 that defines county subdivisions.

xx is reserved

CCCCCCCCCC is 10-bit number between 0 to 999 that identifies a county within a state.

If the EA_Location code is unknown, then the string shall be all zeros e.g., '000000'.

What is ocStbHostCardEaLocationCode?

Reports the Emergency Alert location code signaled by the CableCARD per ANSI J-STD-042, packing a state/territory code, county subdivision code, and county code into a 3-byte field; all zeros means the location code is unknown.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.4.4.14
snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostCardEaLocationCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.4.4.14.1
snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostCardEaLocationCode.1

Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostCardEaLocationCode OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.3clabProjOpenCableCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.3.1ocStbHostMibModuleOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1ocStbHostMibObjectsOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.4ocStbHostStatusOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.4.4ocStbCardInfoOC-STB-HOST-MIB
1.3.6.1.4.1.4491.2.3.1.1.4.4.14ocStbHostCardEaLocationCodeOC-STB-HOST-MIB