All MIBs › OC-STB-HOST-MIB › ocStbHostAnalogVideoProtectionStatus
ocStbHostAnalogVideoProtectionStatus
Module: OC-STB-HOST-MIB
OID (symbolic): OC-STB-HOST-MIB::ocStbHostAnalogVideoProtectionStatus
OID (numeric): 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The analog protection system (APS) of this Video content entry. The possible values are: 'copyProtectionOff' means the Macrovision Analog protection is off 'splitBurstOff' means the AGC (Automatic Gain Control) is on and the split burst is off. 'twoLineSplitBurst' means AGC is on with two-line split burst. 'fourLineSplitBurst' means AGC is on with four-line split burst. This object is instantiated only for A/V output interfaces that support APS like but not limited to: 'ocStbHostRfOutCh', 'ocStbHostSVideoOut' and 'ocStbHostBbVideoOut'. The A/V interfaces 'ocStbHostComponentOut' only support 'splitBurstOff' APS mode for the video formats 'format480i' and 'format480p'.
What is ocStbHostAnalogVideoProtectionStatus?
Reports the Macrovision/APS analog copy-protection mode currently applied to this A/V output, e.g. fourLineSplitBurst(3) for AGC with four-line split burst; per the description this object only exists for outputs that support APS (like RF-out or S-Video), and Component Video outputs support only the splitBurstOff mode, and only for 480i/480p formats.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1 snmpwalk -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostAnalogVideoProtectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1.1 snmpget -v2c -c public <target> OC-STB-HOST-MIB::ocStbHostAnalogVideoProtectionStatus.1
Start monitoring Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OC-STB-HOST-MIB::ocStbHostAnalogVideoProtectionStatus OID value, configure state conditions and alerts, and monitor any Cable set-top box (STB), vendor-neutral CableLabs OpenCable Host specification from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.3 | clabProjOpenCable | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.3.1 | ocStbHostMibModule | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1 | ocStbHostMibObjects | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1 | ocStbHostSystem | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2 | ocStbHostInterfaces | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7 | ocStbHostServiceProgramInfo | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4 | ocStbHostAnalogVideoTable | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1 | ocStbHostAnalogVideoEntry | OC-STB-HOST-MIB |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1 | ocStbHostAnalogVideoProtectionStatus | OC-STB-HOST-MIB |