All MIBs › Nortel-Magellan-Passport-FrTraceRcvrMIB
Category: Frame Relay
Description: Manages Nortel Magellan Passport Frame Relay trace receiver buffer configuration and capture retrieval.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-Magellan-Passport-FrTraceRcvrMIB?
This MIB manages the Frame Relay trace receiver function on Nortel's Magellan Passport switching platform, used to configure buffers for capturing and retrieving Frame Relay protocol traces. It belongs to the Nortel legacy Frame Relay WAN switching technology area. It exposes provisioning and row-status tables for trace receiver instances and their associated DNA (Distributed Network Architecture) addressing components, following the Passport platform's component/row-status model. Its role is in configuring and confirming trace-capture capability status, verifying a trace receiver component is provisioned and active before capturing frames for diagnosing a Frame Relay signaling or data problem, making it primarily a diagnostic/troubleshooting tool rather than a continuous health monitor. It follows Nortel Passport's shared component-naming and row-status conventions common to sibling Passport MIBs. It is typically deployed on Nortel Magellan Passport switches by network engineers troubleshooting Frame Relay circuit issues. Engineers can download the Nortel-Magellan-Passport-FrTraceRcvrMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-FrTraceRcvrMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Magellan Passport switch
Monitoring Examples
An engineer would query traceRcvrFrRowStatusTable/traceRcvrFrRowStatus to confirm a Frame Relay trace receiver component is active before initiating a capture, and traceRcvrFrDnaRowStatusTable/traceRcvrFrDnaRowStatus to verify the associated DNA addressing entry is correctly provisioned. If a row remains in a non-active state, this would indicate the trace receiver failed to provision, preventing frame capture needed to diagnose an ongoing Frame Relay problem. This MIB is used episodically during troubleshooting rather than for continuous performance monitoring.
What Can Be Monitored
- trace receiver component status
- trace receiver row/administrative status
- DNA addressing entry status
This MIB depends on
Related MIBs
Imported Objects
From Nortel-Magellan-Passport-StandardTextualConventionsMIB
| DisplayString | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-Magellan-Passport-TextualConventionsMIB
| AsciiString | |
| DigitString | |
| EnterpriseDateAndTime | |
| Hex | |
| HexString | |
| NonReplicated |
From Nortel-Magellan-Passport-TraceBaseMIB
| traceIndex | OBJECT-TYPE |
| traceRcvr | OBJECT-IDENTITY |
| traceRcvrIndex | OBJECT-TYPE |
| traceSession | OBJECT-IDENTITY |
| traceSessionIndex | OBJECT-TYPE |
From Nortel-Magellan-Passport-UsefulDefinitionsMIB
| passportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| traceRcvrFr | 1.3.6.1.4.1.562.2.4.1.106.2.3 | |||
| traceRcvrFrRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.1 | not-accessible | This entry controls the addition and deletion of traceRcvrFr components. | |
| traceRcvrFrRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1 | not-accessible | A single entry in the table represents a single traceRcvrFr component. | |
| ROW traceRcvrFrRowStatus | 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of traceRcvrFr components. These components can be added and deleted. |
| STR traceRcvrFrComponentName | 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceRcvrFrStorageType | 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceRcvrFr tables. |
| NON traceRcvrFrIndex | 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the traceRcvrFr tables. |
| traceRcvrFrDna | 1.3.6.1.4.1.562.2.4.1.106.2.3.2 | |||
| traceRcvrFrDnaRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1 | not-accessible | This entry controls the addition and deletion of traceRcvrFrDna components. | |
| traceRcvrFrDnaRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1 | not-accessible | A single entry in the table represents a single traceRcvrFrDna component. | |
| ROW traceRcvrFrDnaRowStatus | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of traceRcvrFrDna components. These components cannot be added nor deleted. |
| STR traceRcvrFrDnaComponentName | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceRcvrFrDnaStorageType | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceRcvrFrDna tables. |
| NON traceRcvrFrDnaIndex | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the traceRcvrFrDna tables. |
| traceRcvrFrDnaCug | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2 | |||
| traceRcvrFrDnaCugRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1 | not-accessible | This entry controls the addition and deletion of traceRcvrFrDnaCug components. | |
| traceRcvrFrDnaCugRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1 | not-accessible | A single entry in the table represents a single traceRcvrFrDnaCug component. | |
| ROW traceRcvrFrDnaCugRowStatus | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of traceRcvrFrDnaCug components. These components can be added and deleted. |
| STR traceRcvrFrDnaCugComponentName | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceRcvrFrDnaCugStorageType | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceRcvrFrDnaCug tables. |
| I32 traceRcvrFrDnaCugIndex | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the traceRcvrFrDnaCug tables. |
| traceRcvrFrDnaCugCugOptionsTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10 | not-accessible | Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group. | |
| traceRcvrFrDnaCugCugOptionsEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1 | not-accessible | An entry in the traceRcvrFrDnaCugCugOptionsTable. | |
| INT traceRcvrFrDnaCugType | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.1 | INTEGER | read-write | This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries. |
| STR traceRcvrFrDnaCugDnic | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.2 | DigitString | read-write | This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T. |
| U32 traceRcvrFrDnaCugInterlockCode | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.3 | Unsigned32 | read-write | This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode. |
| INT traceRcvrFrDnaCugPreferential | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.4 | INTEGER | read-only | This attribute specifies that this Cug is to be used on all outgoing calls to the Frame Relay trace receiver. |
| INT traceRcvrFrDnaCugOutCalls | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.5 | INTEGER | read-only | This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug. |
| INT traceRcvrFrDnaCugIncCalls | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.6 | INTEGER | read-only | This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug. |
| INT traceRcvrFrDnaCugPrivileged | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.7 | INTEGER | read-only | This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug. |
| traceRcvrFrDnaAddressTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10 | not-accessible | This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits. | |
| traceRcvrFrDnaAddressEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1 | not-accessible | An entry in the traceRcvrFrDnaAddressTable. | |
| INT traceRcvrFrDnaNumberingPlanIndicator | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1.1 | INTEGER | read-write | This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan. |
| STR traceRcvrFrDnaDataNetworkAddress | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1.2 | DigitString | read-write | The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits. |
| traceRcvrFrDnaOutgoingOptionsTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11 | not-accessible | This group defines the call options for outgoing calls. | |
| traceRcvrFrDnaOutgoingOptionsEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1 | not-accessible | An entry in the traceRcvrFrDnaOutgoingOptionsTable. | |
| INT traceRcvrFrDnaOutCalls | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.1 | INTEGER | read-only | This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component. |
| INT traceRcvrFrDnaOutDefaultPriority | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.7 | INTEGER | read-write | If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority. |
| INT traceRcvrFrDnaOutIntl | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.8 | INTEGER | read-only | This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed. |
| INT traceRcvrFrDnaOutDefaultPathReliability | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.14 | INTEGER | read-only | This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication. |
| INT traceRcvrFrDnaOutPathReliabilityOverRide | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.15 | INTEGER | read-only | This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end. |
| INT traceRcvrFrDnaOutPathReliabilitySignal | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.16 | INTEGER | read-only | This attribute specifies that reliability routing signaling is not used. |
| INT traceRcvrFrDnaOutAccess | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.17 | INTEGER | read-write | This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature. |
| traceRcvrFrDnaIncomingOptionsTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12 | not-accessible | This group defines the call options for incoming calls. | |
| traceRcvrFrDnaIncomingOptionsEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12.1 | not-accessible | An entry in the traceRcvrFrDnaIncomingOptionsTable. | |
| INT traceRcvrFrDnaIncCalls | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12.1.1 | INTEGER | read-only | This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna. |
| traceRcvrFrDnaCallOptionsTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13 | not-accessible | The CallOptions group defines additional options for calls which are not specific to the direction of the call. | |
| traceRcvrFrDnaCallOptionsEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1 | not-accessible | An entry in the traceRcvrFrDnaCallOptionsTable. | |
| OCT traceRcvrFrDnaPacketSizes | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.2 | OCTET STRING | read-only | This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8) |
| INT traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.3 | INTEGER | read-only | This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna. |
| INT traceRcvrFrDnaDefaultSendToNetworkPacketSize | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.4 | INTEGER | read-only | This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna. |
| INT traceRcvrFrDnaCugFormat | 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.10 | INTEGER | read-only | This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long. |
| traceRcvrFrDc | 1.3.6.1.4.1.562.2.4.1.106.2.3.3 | |||
| traceRcvrFrDcRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1 | not-accessible | This entry controls the addition and deletion of traceRcvrFrDc components. | |
| traceRcvrFrDcRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1 | not-accessible | A single entry in the table represents a single traceRcvrFrDc component. | |
| ROW traceRcvrFrDcRowStatus | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of traceRcvrFrDc components. These components cannot be added nor deleted. |
| STR traceRcvrFrDcComponentName | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceRcvrFrDcStorageType | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceRcvrFrDc tables. |
| NON traceRcvrFrDcIndex | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the traceRcvrFrDc tables. |
| traceRcvrFrDcOptionsTable | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10 | not-accessible | The Options group defines attributes associated with the SVC direct call. | |
| traceRcvrFrDcOptionsEntry | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1 | not-accessible | An entry in the traceRcvrFrDcOptionsTable. | |
| INT traceRcvrFrDcRemoteNpi | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.3 | INTEGER | read-write | This attribute indicates the numbering plan used for the remoteDna. |
| STR traceRcvrFrDcRemoteDna | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.4 | DigitString | read-write | This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the Frame Relay trace receiver which will receive the trace data. |
| INT traceRcvrFrDcType | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.6 | INTEGER | read-only | This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection. |
| STR traceRcvrFrDcUserData | 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.8 | HexString | read-write | This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE. |
| traceSessionFr | 1.3.6.1.4.1.562.2.4.1.106.3.3 | |||
| traceSessionFrRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFr components. | |
| traceSessionFrRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1 | not-accessible | A single entry in the table represents a single traceSessionFr component. | |
| ROW traceSessionFrRowStatus | 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of traceSessionFr components. These components cannot be added nor deleted. |
| STR traceSessionFrComponentName | 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceSessionFrStorageType | 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceSessionFr tables. |
| NON traceSessionFrIndex | 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the traceSessionFr tables. |
| traceSessionFrVc | 1.3.6.1.4.1.562.2.4.1.106.3.3.2 | |||
| traceSessionFrVcRowStatusTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFrVc components. | |
| traceSessionFrVcRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1 | not-accessible | A single entry in the table represents a single traceSessionFrVc component. | |
| ROW traceSessionFrVcRowStatus | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of traceSessionFrVc components. These components cannot be added nor deleted. |
| STR traceSessionFrVcComponentName | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO traceSessionFrVcStorageType | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the traceSessionFrVc tables. |
| NON traceSessionFrVcIndex | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the traceSessionFrVc tables. |
| traceSessionFrVcCadTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. | |
| traceSessionFrVcCadEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1 | not-accessible | An entry in the traceSessionFrVcCadTable. | |
| INT traceSessionFrVcType | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.1 | INTEGER | read-only | This attribute displays the type of call, pvc,svc or spvc. |
| INT traceSessionFrVcState | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.2 | INTEGER | read-only | This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4. |
| INT traceSessionFrVcPreviousState | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.3 | INTEGER | read-only | This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. |
| U32 traceSessionFrVcDiagnosticCode | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.4 | Unsigned32 | read-only | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| U32 traceSessionFrVcPreviousDiagnosticCode | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.5 | Unsigned32 | read-only | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| INT traceSessionFrVcCalledNpi | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.6 | INTEGER | read-only | This attribute displays the Numbering Plan Indicator (NPI) of the called end. |
| STR traceSessionFrVcCalledDna | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.7 | DigitString | read-only | This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection. |
| U32 traceSessionFrVcCalledLcn | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.8 | Unsigned32 | read-only | This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. |
| INT traceSessionFrVcCallingNpi | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.9 | INTEGER | read-only | This attribute displays the Numbering Plan Indicator (NPI) of the calling end. |
| STR traceSessionFrVcCallingDna | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.10 | DigitString | read-only | This attribute displays the Data Network Address (Dna) of the calling end. |
| U32 traceSessionFrVcCallingLcn | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.11 | Unsigned32 | read-only | This attribute displays the Logical Channel Number of the calling end. |
| INT traceSessionFrVcAccountingEnabled | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.12 | INTEGER | read-only | This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options. |
| INT traceSessionFrVcFastSelectCall | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.13 | INTEGER | read-only | This attribute displays that this is a fast select call. |
| INT traceSessionFrVcPathReliability | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.19 | INTEGER | read-only | This attribute displays the path reliability. |
| INT traceSessionFrVcAccountingEnd | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.20 | INTEGER | read-only | This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. |
| INT traceSessionFrVcPriority | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.21 | INTEGER | read-only | This attribute displays whether the call is a normal or a high priority call. |
| U32 traceSessionFrVcSegmentSize | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.22 | Unsigned32 | read-only | This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. |
| U32 traceSessionFrVcMaxSubnetPktSize | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.27 | Unsigned32 | read-only | This attribute indicates the maximum packet size allowed on the Vc. |
| INT traceSessionFrVcRcosToNetwork | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.28 | INTEGER | read-only | This attribute indicates the routing metric routing class of service to the network. |
| INT traceSessionFrVcRcosFromNetwork | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.29 | INTEGER | read-only | This attribute displays the routing metric Routing Class of Service from the Network. |
| INT traceSessionFrVcEmissionPriorityToNetwork | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.30 | INTEGER | read-only | This attribute displays the network internal emission priotity to the network. |
| INT traceSessionFrVcEmissionPriorityFromNetwork | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.31 | INTEGER | read-only | This attribute displays the network internal emission priotity from the network. |
| STR traceSessionFrVcDataPath | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.32 | AsciiString | read-only | This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed. |
| traceSessionFrVcIntdTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. | |
| traceSessionFrVcIntdEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1 | not-accessible | An entry in the traceSessionFrVcIntdTable. | |
| HEX traceSessionFrVcCallReferenceNumber | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.1 | Hex | read-only | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call. |
| U32 traceSessionFrVcElapsedTimeTillNow | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.2 | Unsigned32 | read-only | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. |
| U32 traceSessionFrVcSegmentsRx | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.3 | Unsigned32 | read-only | This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state. |
| U32 traceSessionFrVcSegmentsSent | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.4 | Unsigned32 | read-only | This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet. |
| ENT traceSessionFrVcStartTime | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.5 | EnterpriseDateAndTime | read-only | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes. |
| traceSessionFrVcFrdTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers | |
| traceSessionFrVcFrdEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1 | not-accessible | An entry in the traceSessionFrVcFrdTable. | |
| U32 traceSessionFrVcFrmCongestedToSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.2 | Unsigned32 | read-only | This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size. |
| U32 traceSessionFrVcCannotForwardToSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.3 | Unsigned32 | read-only | This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well. |
| U32 traceSessionFrVcNotDataXferToSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.4 | Unsigned32 | read-only | This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. |
| U32 traceSessionFrVcOutOfRangeFrmFromSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.5 | Unsigned32 | read-only | This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. |
| U32 traceSessionFrVcCombErrorsFromSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.6 | Unsigned32 | read-only | This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc |
| U32 traceSessionFrVcDuplicatesFromSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.7 | Unsigned32 | read-only | This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased. |
| U32 traceSessionFrVcNotDataXferFromSubnet | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.8 | Unsigned32 | read-only | This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. |
| U32 traceSessionFrVcFrmLossTimeouts | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.9 | Unsigned32 | read-only | This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet. |
| U32 traceSessionFrVcOoSeqByteCntExceeded | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.10 | Unsigned32 | read-only | This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. |
| U32 traceSessionFrVcPeakOoSeqPktCount | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.11 | Unsigned32 | read-only | This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. |
| U32 traceSessionFrVcPeakOoSeqFrmForwarded | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.12 | Unsigned32 | read-only | This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue. |
| U32 traceSessionFrVcSendSequenceNumber | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.13 | Unsigned32 | read-only | This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. |
| U32 traceSessionFrVcPktRetryTimeouts | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.15 | Unsigned32 | read-only | This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet. |
| U32 traceSessionFrVcPeakRetryQueueSize | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.16 | Unsigned32 | read-only | This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets. |
| U32 traceSessionFrVcSubnetRecoveries | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.17 | Unsigned32 | read-only | This attribute displays the number of successful Vc recovery attempts. |
| U32 traceSessionFrVcOoSeqPktCntExceeded | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.19 | Unsigned32 | read-only | This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. |
| U32 traceSessionFrVcPeakOoSeqByteCount | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.20 | Unsigned32 | read-only | This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. |
| traceSessionFrVcDmepTable | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint. | |
| traceSessionFrVcDmepEntry | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417.1 | not-accessible | An entry in the traceSessionFrVcDmepTable. | |
| NUM traceSessionFrVcDmepValue | 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417.1.1 | RowPointer | read-only | This variable represents both the value and the index for the traceSessionFrVcDmepTable. |
| frTraceRcvrMIB | 1.3.6.1.4.1.562.2.4.2.139 | |||
| frTraceRcvrGroup | 1.3.6.1.4.1.562.2.4.2.139.1 | |||
| frTraceRcvrGroupBE | 1.3.6.1.4.1.562.2.4.2.139.1.5 | |||
| frTraceRcvrGroupBE01 | 1.3.6.1.4.1.562.2.4.2.139.1.5.2 | |||
| frTraceRcvrGroupBE01A | 1.3.6.1.4.1.562.2.4.2.139.1.5.2.2 | |||
| frTraceRcvrCapabilities | 1.3.6.1.4.1.562.2.4.2.139.3 | |||
| frTraceRcvrCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.139.3.5 | |||
| frTraceRcvrCapabilitiesBE01 | 1.3.6.1.4.1.562.2.4.2.139.3.5.2 | |||
| frTraceRcvrCapabilitiesBE01A | 1.3.6.1.4.1.562.2.4.2.139.3.5.2.2 |
RFC description
Manages Frame Relay trace receivers on Nortel Magellan Passport platforms for troubleshooting and diagnostics.
Start monitoring Nortel Magellan Passport switch (Frame Relay trace receiver) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.