All MIBs › NTWS-AP-CONFIG-MIB
Organization: Nortel Networks
Last Updated: 2009-11-19
Category: Nortel WLAN
Description: Manages access point radio, SSID, and security profile configuration on Nortel NTWS wireless LAN controllers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NTWS-AP-CONFIG-MIB?
NTWS-AP-CONFIG-MIB is a Nortel Networks vendor MIB for its NTWS wireless LAN product line, covering configuration management of Access Points (APs) attached to an NTWS Access Controller (wireless switch). It exposes per-AP configuration data organized in ntwsApConfApConfigTable, including physical attachment type and port number, serial number, model name, hardware fingerprint, bias/timeout settings, and administrative name/contact information. Its role is primarily software/configuration status monitoring: an administrator uses it to verify each AP is correctly registered and provisioned on the controller (correct model, serial number, attach type, and timeout settings) rather than to read live performance counters, which are covered by the companion NTWS-AP-STATUS-MIB. It works alongside other Nortel NTWS MIBs, most notably NTWS-AP-STATUS-MIB for operational state and NTWS-CLIENT-SESSION-MIB for client data, all sharing the AP/AC (Access Point/Access Controller) architecture. It is deployed on Nortel NTWS wireless switches (Access Controllers) managing fleets of thin access points in enterprise WLAN deployments. Network engineers evaluating or troubleshooting this functionality can download the NTWS-AP-CONFIG-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NTWS-AP-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel NTWS wireless LAN controllers (Access Controllers) and managed thin Access Points
Monitoring Examples
An administrator would poll ntwsApConfApConfigTable/ntwsApConfApConfigEntry, keying on ntwsApConfApConfigApNum, to confirm each AP's ntwsApConfApConfigApSerialNum and ntwsApConfApConfigApModelName match inventory records, and check ntwsApConfApConfigApTimeout and ntwsApConfApConfigBias for correct provisioning. An AP entry with an unexpected ntwsApConfApConfigApAttachType or a missing/mismatched ntwsApConfApConfigFingerprint would reveal a misconfigured or unauthorized access point on the controller.
What Can Be Monitored
- AP configuration table (per-AP settings)
- AP serial number and model
- AP attach type and physical port
- AP timeout/bias settings
- AP name and contact info
- AP hardware fingerprint
This MIB depends on
Related MIBs
Imported Objects
From NTWS-AP-TC
| NtwsApAttachType | |
| NtwsApBias | |
| NtwsApFingerprint | |
| NtwsApLedMode | |
| NtwsApNum | |
| NtwsApPowerMode | |
| NtwsApRadioIndex | |
| NtwsApSerialNum | |
| NtwsChannelNum | |
| NtwsPowerLevel | |
| NtwsRadioAntennaLocation | |
| NtwsRadioChannelWidth | |
| NtwsRadioMode | |
| NtwsRadioType |
From NTWS-BASIC-TC
| NtwsPhysPortNumberOrZero |
From NTWS-ROOT-MIB
| ntwsMibs | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ntwsApConfigMib | 1.3.6.1.4.1.45.6.1.4.14 | AP Configuration objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| ntwsApConfigMibObjects | 1.3.6.1.4.1.45.6.1.4.14.1 | |||
| ntwsApConfApConfigTable | 1.3.6.1.4.1.45.6.1.4.14.1.2 | not-accessible | A table describing all the APs currently configured on this AC. | |
| ntwsApConfApConfigEntry | 1.3.6.1.4.1.45.6.1.4.14.1.2.1 | not-accessible | Configuration for a particular AP that could be attached to the AC. | |
| NTW ntwsApConfApConfigApNum | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.1 | NtwsApNum | not-accessible | The Number of this AP (administratively assigned). |
| NTW ntwsApConfApConfigApAttachType | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.2 | NtwsApAttachType | read-only | How this AP is attached to the AC (directly or via L2/L3 network). |
| NTW ntwsApConfApConfigPhysPortNum | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.3 | NtwsPhysPortNumberOrZero | read-only | Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero. |
| NTW ntwsApConfApConfigApSerialNum | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.4 | NtwsApSerialNum | read-only | The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string. |
| STR ntwsApConfApConfigApModelName | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.5 | DisplayString | read-only | The Model name of this AP. |
| NUM ntwsApConfApConfigFingerprint | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.6 | NtwsApFingerprint | read-only | The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string. |
| NTW ntwsApConfApConfigBias | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.7 | NtwsApBias | read-only | Bias (high/low/sticky). |
| U32 ntwsApConfApConfigApTimeout | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.8 | Unsigned32 | read-only | The communication timeout for this AP, in seconds. |
| STR ntwsApConfApConfigApName | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.9 | DisplayString | read-only | The configured Name for this AP. |
| STR ntwsApConfApConfigContact | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.10 | DisplayString | read-only | The Contact information for this AP. |
| STR ntwsApConfApConfigLocation | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.11 | DisplayString | read-only | The Location information for this AP. |
| T/F ntwsApConfApConfigBlinkEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.12 | TruthValue | read-only | Indicates whether the LED blink mode is enabled on this AP. |
| T/F ntwsApConfApConfigForceImageDownloadEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.13 | TruthValue | read-only | Indicates whether this AP is forced to always download an image from the AC upon boot. |
| T/F ntwsApConfApConfigFirmwareUpgradeEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.14 | TruthValue | read-only | Indicates whether automatic boot firmware upgrade is enabled on this AP. |
| T/F ntwsApConfApConfigLocalSwitchingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.15 | TruthValue | read-only | Indicates whether local switching is enabled on this AP. |
| NTW ntwsApConfApConfigPowerMode | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.16 | NtwsApPowerMode | read-only | The mode in which this AP is supplying power to its radios. |
| NTW ntwsApConfApConfigLedMode | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.17 | NtwsApLedMode | read-only | LED Mode (auto/static/off). |
| STR ntwsApConfApConfigDescription | 1.3.6.1.4.1.45.6.1.4.14.1.2.1.18 | DisplayString | read-only | The configured Description for this AP. |
| ntwsApConfRadioConfigTable | 1.3.6.1.4.1.45.6.1.4.14.1.3 | not-accessible | A table describing the radios on all the APs currently configured on this AC. | |
| ntwsApConfRadioConfigEntry | 1.3.6.1.4.1.45.6.1.4.14.1.3.1 | not-accessible | Configuration for a particular Radio on a particular AP that could be attached to the AC. | |
| NTW ntwsApConfRadioConfigApNum | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.1 | NtwsApNum | not-accessible | The Number of the AP (administratively assigned). |
| NTW ntwsApConfRadioConfigRadioIndex | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.2 | NtwsApRadioIndex | not-accessible | The number of this Radio on the AP. |
| NTW ntwsApConfRadioConfigRadioType | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.3 | NtwsRadioType | read-only | The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG) |
| NTW ntwsApConfRadioConfigRadioMode | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.4 | NtwsRadioMode | read-only | The configured Mode of this radio (enabled/disabled/sentry) |
| NTW ntwsApConfRadioConfigRadioProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.5 | NtwsRadioProfileName | read-only | Identifies the Radio Profile to be applied to this radio |
| NTW ntwsApConfRadioConfigChannel | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.6 | NtwsChannelNum | read-only | The configured Channel Number of this radio. |
| NTW ntwsApConfRadioConfigTxPower | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.7 | NtwsPowerLevel | read-only | The configured Tx Power level of this radio. |
| NTW ntwsApConfRadioConfigAutoTuneMaxTxPower | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.8 | NtwsPowerLevel | read-only | The Maximum Tx Power that Auto Tune is allowed to set for this radio. |
| STR ntwsApConfRadioConfigAntennaType | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.9 | DisplayString | read-only | The configured Antenna Type for this radio. |
| NTW ntwsApConfRadioConfigAntennaLocation | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.10 | NtwsRadioAntennaLocation | read-only | The configured Antenna Location for this radio. |
| T/F ntwsApConfRadioConfigLoadBalancingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.11 | TruthValue | read-only | Indicates whether RF Load Balancing is enabled on this radio. |
| STR ntwsApConfRadioConfigLoadBalancingGroup | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.12 | DisplayString | read-only | Indicates the RF Load Balancing group that this radio is assigned to. |
| T/F ntwsApConfRadioConfigLoadRebalancingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.3.1.13 | TruthValue | read-only | Indicates whether RF Load Rebalancing is enabled for this radio. |
| ntwsApConfApTemplateConfigTable | 1.3.6.1.4.1.45.6.1.4.14.1.4 | not-accessible | A table describing all the AP Templates currently configured on this AC. | |
| ntwsApConfApTemplateConfigEntry | 1.3.6.1.4.1.45.6.1.4.14.1.4.1 | not-accessible | Template configuration for APs that could be attached to the AC. | |
| NTW ntwsApConfApTemplConfApTemplateName | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.1 | NtwsApTemplateName | not-accessible | AP Template Name. |
| T/F ntwsApConfApTemplConfApTemplateEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.2 | TruthValue | read-only | Indicates whether this AP Template is Enabled (can be used for bringing up APs). |
| NTW ntwsApConfApTemplConfBias | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.3 | NtwsApBias | read-only | Bias (high/low/sticky). |
| U32 ntwsApConfApTemplConfApTimeout | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.4 | Unsigned32 | read-only | The communication timeout for this AP Template, in seconds. |
| T/F ntwsApConfApTemplConfBlinkEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.5 | TruthValue | read-only | Indicates whether the LED blink mode is enabled on this AP Template. |
| T/F ntwsApConfApTemplConfForceImageDownloadEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.6 | TruthValue | read-only | Indicates whether this AP is forced to always download an image from the AC upon boot. |
| T/F ntwsApConfApTemplConfFirmwareUpgradeEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.7 | TruthValue | read-only | Indicates whether automatic boot firmware upgrade is enabled on this AP Template. |
| T/F ntwsApConfApTemplConfLocalSwitchingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.8 | TruthValue | read-only | Indicates whether local switching is enabled on this AP Template. |
| NTW ntwsApConfApTemplConfPowerMode | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.9 | NtwsApPowerMode | read-only | The mode in which an AP using this Template will be supplying power to its radios. |
| NTW ntwsApConfApTemplConfLedMode | 1.3.6.1.4.1.45.6.1.4.14.1.4.1.10 | NtwsApLedMode | read-only | The LED Mode (auto/static/off) for an AP using this Template. |
| ntwsApConfApTemplateRadioConfigTable | 1.3.6.1.4.1.45.6.1.4.14.1.5 | not-accessible | A table describing the radios for all the AP Templates currently configured on this AC. | |
| ntwsApConfApTemplateRadioConfigEntry | 1.3.6.1.4.1.45.6.1.4.14.1.5.1 | not-accessible | Template configuration for a particular Radio index on an AP Template configured on this AC. | |
| NTW ntwsApConfApTemRadioConfApTemplateName | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.1 | NtwsApTemplateName | not-accessible | AP Template Name. |
| NTW ntwsApConfApTemRadioConfRadioIndex | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.2 | NtwsApRadioIndex | not-accessible | The number of this Radio on the AP Template. |
| NTW ntwsApConfApTemRadioConfRadioMode | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.3 | NtwsRadioMode | read-only | The configured mode of a radio using this Template (enabled/disabled/sentry) |
| NTW ntwsApConfApTemRadioConfRadioProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.4 | NtwsRadioProfileName | read-only | Identifies the Radio Profile to be applied to a radio using this Template |
| NTW ntwsApConfApTemRadioConfAutoTuneMaxTxPower | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.5 | NtwsPowerLevel | read-only | The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template. |
| T/F ntwsApConfApTemRadioConfLoadBalancingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.6 | TruthValue | read-only | Indicates whether RF Load Balancing will be enabled on a radio using this Template. |
| STR ntwsApConfApTemRadioConfLoadBalancingGroup | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.7 | DisplayString | read-only | Indicates the RF Load Balancing group that a radio using this Template will be assigned to. |
| T/F ntwsApConfApTemRadioConfLoadRebalancingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.5.1.8 | TruthValue | read-only | Indicates whether RF Load Rebalancing will be enabled for a radio using this Template. |
| ntwsApConfRadioProfileTable | 1.3.6.1.4.1.45.6.1.4.14.1.6 | not-accessible | A table describing the Radio Profiles currently configured on this AC. | |
| ntwsApConfRadioProfileEntry | 1.3.6.1.4.1.45.6.1.4.14.1.6.1 | not-accessible | Configuration for a particular Radio Profile. | |
| NTW ntwsApConfRadioProfRadioProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.1 | NtwsRadioProfileName | not-accessible | Name of this radio profile. |
| U32 ntwsApConfRadioProfBeaconInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.2 | Unsigned32 | read-only | Beacon Interval, time in thousandths of a second, for this radio profile. |
| U32 ntwsApConfRadioProfDtimInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.3 | Unsigned32 | read-only | The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile. |
| NTW ntwsApConfRadioProfChannelWidth11na | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.4 | NtwsRadioChannelWidth | read-only | 802.11n Channel Width for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfMaxTxLifetime | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.5 | Unsigned32 | read-only | The maximum transmit threshold for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfMaxRxLifetime | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.6 | Unsigned32 | read-only | The maximum receive threshold for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfRtsThreshold | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.7 | Unsigned32 | read-only | The RTS threshold for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfFragThreshold | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.8 | Unsigned32 | read-only | The fragmentation threshold for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfLongXmitPreambleEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.9 | TruthValue | read-only | Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. |
| NUM ntwsApConfRadioProfCountermeasuresMode | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.10 | NtwsRadioProfileCountermeasuresMode | read-only | Countermeasures Mode for the AP radios using this radio profile. |
| NTW ntwsApConfRadioProfRFScanMode | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.11 | NtwsRadioProfileRFScanMode | read-only | RF Scanning Mode for the AP radios using this radio profile. |
| NTW ntwsApConfRadioProfRFScanChannelScope | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.12 | NtwsRadioProfileRFScanChannelScope | read-only | RF scanning Channel Scope for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfRFScanCTSEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.13 | TruthValue | read-only | Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. |
| NTW ntwsApConfRadioProfAutoTune11aChannelRange | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.14 | NtwsRadioProfileAutoTuneChannelRange | read-only | The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfAutoTuneIgnoreClientsEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.15 | TruthValue | read-only | Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections. |
| T/F ntwsApConfRadioProfAutoTuneChannelEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.16 | TruthValue | read-only | Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfAutoTuneChannelHolddownInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.17 | Unsigned32 | read-only | Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfAutoTuneChannelChangeInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.18 | Unsigned32 | read-only | The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfAutoTunePowerEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.19 | TruthValue | read-only | Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfAutoTunePowerRampInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.20 | Unsigned32 | read-only | Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfAutoTunePowerChangeInterval | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.21 | Unsigned32 | read-only | The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfFairQueuingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.22 | TruthValue | read-only | Indicates whether weighted Fair Queuing is enabled for this radio profile. |
| T/F ntwsApConfRadioProfCacBackgroundACMandatory | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.23 | TruthValue | read-only | Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfCacBackgroundMaxUtilization | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.24 | Unsigned32 | read-only | Maximum admission control limit for Background traffic, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacBackgroundPolicingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.25 | TruthValue | read-only | Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacBestEffortACMandatory | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.26 | TruthValue | read-only | Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfCacBestEffortMaxUtilization | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.27 | Unsigned32 | read-only | Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacBestEffortPolicingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.28 | TruthValue | read-only | Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacVideoACMandatory | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.29 | TruthValue | read-only | Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfCacVideoMaxUtilization | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.30 | Unsigned32 | read-only | Maximum admission control limit for Video traffic, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacVideoPolicingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.31 | TruthValue | read-only | Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacVoiceACMandatory | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.32 | TruthValue | read-only | Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. |
| U32 ntwsApConfRadioProfCacVoiceMaxUtilization | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.33 | Unsigned32 | read-only | Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfCacVoicePolicingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.34 | TruthValue | read-only | Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. |
| T/F ntwsApConfRadioProfRfidTagEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.35 | TruthValue | read-only | Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. |
| T/F ntwsApConfRadioProfWmmPowerSaveEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.36 | TruthValue | read-only | Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. |
| T/F ntwsApConfRadioProfRateEnforcementEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.37 | TruthValue | read-only | Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP. |
| T/F ntwsApConfRadioProfDfsChannelsEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.6.1.38 | TruthValue | read-only | Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. |
| ntwsApConfRadioProfServiceProfileTable | 1.3.6.1.4.1.45.6.1.4.14.1.7 | not-accessible | A table describing the currently configured connections between Radio Profiles and Service Profiles. | |
| ntwsApConfRadioProfServiceProfileEntry | 1.3.6.1.4.1.45.6.1.4.14.1.7.1 | not-accessible | Connection between a Radio Profile and a Service Profile, currently configured on the AC. | |
| NTW ntwsApConfRpServpRadioProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.7.1.1 | NtwsRadioProfileName | not-accessible | Name of this Radio Profile. |
| NTW ntwsApConfRpServpServiceProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.7.1.2 | NtwsServiceProfileName | not-accessible | Name of a Service Profile connected to this Radio Profile. |
| ROW ntwsApConfRpServpRowStatus | 1.3.6.1.4.1.45.6.1.4.14.1.7.1.3 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. |
| ntwsApConfRadioProfSnoopFilterTable | 1.3.6.1.4.1.45.6.1.4.14.1.8 | not-accessible | A table describing the currently configured connections between Radio Profiles and Snoop Filters. | |
| ntwsApConfRadioProfSnoopFilterEntry | 1.3.6.1.4.1.45.6.1.4.14.1.8.1 | not-accessible | Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. | |
| NTW ntwsApConfRpSnoopfRadioProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.8.1.1 | NtwsRadioProfileName | not-accessible | Name of this Radio Profile. |
| NTW ntwsApConfRpSnoopfSnoopFilterName | 1.3.6.1.4.1.45.6.1.4.14.1.8.1.2 | NtwsSnoopFilterName | not-accessible | Name of a Snoop Filter connected to this Radio Profile. |
| ROW ntwsApConfRpSnoopfRowStatus | 1.3.6.1.4.1.45.6.1.4.14.1.8.1.3 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. |
| ntwsApConfServiceProfileTable | 1.3.6.1.4.1.45.6.1.4.14.1.9 | not-accessible | A table describing the Service Profiles currently configured on this AC. | |
| ntwsApConfServiceProfileEntry | 1.3.6.1.4.1.45.6.1.4.14.1.9.1 | not-accessible | Configuration for a particular Service Profile. | |
| NTW ntwsApConfServProfServiceProfileName | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.1 | NtwsServiceProfileName | not-accessible | Name of this service profile |
| NTW ntwsApConfServProfSsidType | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.2 | NtwsServiceProfileSsidType | read-only | The type of this service profile (clear/crypto). |
| T/F ntwsApConfServProfBeaconEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.3 | TruthValue | read-only | Indicates whether beacons are enabled for this service profile. |
| NTW ntwsApConfServProf11naMode | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.4 | NtwsServiceProfile11nMode | read-only | Indicates the 802.11n (na) mode for this service profile. |
| NTW ntwsApConfServProf11ngMode | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.5 | NtwsServiceProfile11nMode | read-only | Indicates the 802.11n (ng) mode for this service profile. |
| T/F ntwsApConfServProf11nShortGuardIntervalEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.6 | TruthValue | read-only | Indicates whether short guard interval is enabled for this service profile. |
| NTW ntwsApConfServProf11nFrameAggregation | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.7 | NtwsServiceProfile11nFrameAggregationType | read-only | Indicates the Frame Aggregation mode for this service profile. |
| NTW ntwsApConfServProf11nMsduMaxLength | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.8 | NtwsServiceProfile11nMsduMaxLength | read-only | The maximum MSDU length for this service profile. |
| NTW ntwsApConfServProf11nMpduMaxLength | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.9 | NtwsServiceProfile11nMpduMaxLength | read-only | The maximum MPDU length for this service profile. |
| NTW ntwsApConfServProfAuthFallthru | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.10 | NtwsServiceProfileAuthFallthruType | read-only | The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile. |
| STR ntwsApConfServProfWebAAAForm | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.11 | DisplayString | read-only | The custom login page that loads for WebAAA users, for this service profile. |
| T/F ntwsApConfServProfSharedKeyAuthEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.12 | TruthValue | read-only | Indicates whether shared-key authentication is enabled for this service profile. |
| T/F ntwsApConfServProfWpaIeEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.13 | TruthValue | read-only | Indicates whether WPA IE beaconing is enabled for this service profile. |
| T/F ntwsApConfServProfWpaIeCipherTkipEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.14 | TruthValue | read-only | Indicates whether TKIP cipher is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfWpaIeCipherCcmpEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.15 | TruthValue | read-only | Indicates whether CCMP cipher is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfWpaIeCipherWep40Enabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.16 | TruthValue | read-only | Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfWpaIeCipherWep104Enabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.17 | TruthValue | read-only | Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfWpaIeAuthDot1xEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.18 | TruthValue | read-only | Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfWpaIeAuthPskEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.19 | TruthValue | read-only | Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.20 | TruthValue | read-only | Indicates whether RSN IE beaconing is enabled for this service profile. |
| T/F ntwsApConfServProfRsnIeCipherTkipEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.21 | TruthValue | read-only | Indicates whether TKIP cipher is advertised in RSN IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeCipherCcmpEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.22 | TruthValue | read-only | Indicates whether CCMP cipher is advertised in RSN IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeCipherWep40Enabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.23 | TruthValue | read-only | Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeCipherWep104Enabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.24 | TruthValue | read-only | Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeAuthDot1xEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.25 | TruthValue | read-only | Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile. |
| T/F ntwsApConfServProfRsnIeAuthPskEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.26 | TruthValue | read-only | Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile. |
| U32 ntwsApConfServProfTkipMicCountermeasuresTime | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.27 | Unsigned32 | read-only | Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Message Integrity Code (MIC) failures occur within 60 seconds. |
| U32 ntwsApConfServProfMaxBandwidthKbps | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.28 | Unsigned32 | read-only | The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited. |
| NTW ntwsApConfServProfCacMode | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.29 | NtwsServiceProfileCacMode | read-only | The Call Admission Control (CAC) mode, for this service profile. |
| U32 ntwsApConfServProfCacSessCount | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.30 | Unsigned32 | read-only | The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile. |
| U32 ntwsApConfServProfUserIdleTimeout | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.31 | Unsigned32 | read-only | The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires, the client session is changed to the Dissociated state, for this service profile. |
| T/F ntwsApConfServProfIdleClientProbingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.32 | TruthValue | read-only | Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile. |
| U32 ntwsApConfServProfShortRetryCount | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.33 | Unsigned32 | read-only | The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile. |
| U32 ntwsApConfServProfLongRetryCount | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.34 | Unsigned32 | read-only | The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile. |
| T/F ntwsApConfServProfProxyArpEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.35 | TruthValue | read-only | Indicates whether proxy ARP is enabled for this service profile. |
| T/F ntwsApConfServProfDhcpRestrictEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.36 | TruthValue | read-only | Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile. |
| T/F ntwsApConfServProfNoBroadcastEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.37 | TruthValue | read-only | Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile. |
| T/F ntwsApConfServProfSygateOnDemandEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.38 | TruthValue | read-only | Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile. |
| T/F ntwsApConfServProfEnforceChecksEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.39 | TruthValue | read-only | Indicates whether Enforcement of the SODA security checks is enabled for this service profile. |
| STR ntwsApConfServProfSodaRemediationAcl | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.40 | DisplayString | read-only | Remediation page ACL to apply to the client when the failure page is loaded, for this service profile. |
| STR ntwsApConfServProfSodaSuccessPage | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.41 | DisplayString | read-only | Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile. |
| STR ntwsApConfServProfSodaFailurePage | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.42 | DisplayString | read-only | Failure page that is displayed on the client when the SODA agent checks fail, for this service profile. |
| STR ntwsApConfServProfSodaLogoutPage | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.43 | DisplayString | read-only | The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile. |
| STR ntwsApConfServProfSodaAgentDirectory | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.44 | DisplayString | read-only | Specifies a different directory for the SODA agent files used for this service profile. |
| U32 ntwsApConfServProfWebPortalSessionTimeout | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.45 | Unsigned32 | read-only | Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state before being terminated automatically, for this service profile. |
| STR ntwsApConfServProfWebPortalAcl | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.46 | DisplayString | read-only | Name of ACL used for filtering traffic for Web Portal users during authentication, for this service profile. |
| T/F ntwsApConfServProfWebPortalLogoutEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.47 | TruthValue | read-only | Indicates whether the Web Portal logout functionality is enabled for this service profile. |
| STR ntwsApConfServProfWebPortalLogoutUrl | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.48 | DisplayString | read-only | Indicates the Web Portal Logout URL for this service profile. |
| T/F ntwsApConfServProfKeepInitialVlanEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.49 | TruthValue | read-only | Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile. |
| T/F ntwsApConfServProfMeshModeEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.50 | TruthValue | read-only | Indicates whether wireless mesh between APs is enabled for this service profile. |
| T/F ntwsApConfServProfBridgingEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.51 | TruthValue | read-only | Indicates whether wireless bridging of traffic between APs is enabled for this service profile. |
| T/F ntwsApConfServProfLoadBalanceExemptEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.9.1.52 | TruthValue | read-only | Indicates whether this service profile is exempted from load balancing. |
| ntwsApConfSnoopFilterTable | 1.3.6.1.4.1.45.6.1.4.14.1.10 | not-accessible | A table describing the Snoop Filters currently configured on this AC. | |
| ntwsApConfSnoopFilterEntry | 1.3.6.1.4.1.45.6.1.4.14.1.10.1 | not-accessible | Configuration for a particular Snoop Filter. | |
| NTW ntwsApConfSnoopFilterName | 1.3.6.1.4.1.45.6.1.4.14.1.10.1.1 | NtwsSnoopFilterName | not-accessible | Name of this snoop filter. |
| T/F ntwsApConfSnoopFilterEnabled | 1.3.6.1.4.1.45.6.1.4.14.1.10.1.2 | TruthValue | read-only | Indicates whether this snoop filter is enabled. |
| ntwsApConfigConformance | 1.3.6.1.4.1.45.6.1.4.14.2 | |||
| ntwsApConfigCompliances | 1.3.6.1.4.1.45.6.1.4.14.2.1 | |||
| ntwsApConfigCompliance | 1.3.6.1.4.1.45.6.1.4.14.2.1.1 | The compliance statement for devices that implement AP Config MIB. | ||
| ntwsApConfigGroups | 1.3.6.1.4.1.45.6.1.4.14.2.2 | |||
| ntwsApConfApConfigTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.1 | Group of columnar objects implemented to provide AP Configuration info in releases 7.1 and greater. | ||
| ntwsApConfRadioConfigTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.2 | Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 and greater. | ||
| ntwsApConfApTemplateConfigTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.3 | Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater. | ||
| ntwsApConfApTemplateRadioConfigTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.4 | Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 and greater. | ||
| ntwsApConfRadioProfileTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.5 | Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 and greater. | ||
| ntwsApConfRadioProfServiceProfileTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.6 | Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 and greater. | ||
| ntwsApConfRadioProfSnoopFilterTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.7 | Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 and greater. | ||
| ntwsApConfServiceProfileTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.8 | Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater. | ||
| ntwsApConfSnoopFilterTableGroup | 1.3.6.1.4.1.45.6.1.4.14.2.2.9 | Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 and greater. |
RFC description
Configuration objects for Nortel Networks wireless access points on an Access Controller/wireless switch.
Start monitoring Nortel NTWS wireless LAN controller (Access Controller) and managed thin Access Points with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.