NORTEL-WLAN-AP-MIB

All MIBs › NORTEL-WLAN-AP-MIB

Organization: Nortel Networks

Last Updated: 2004-04-12

Category: Nortel WLAN

Description: Manages Nortel 2200/2300 series wireless access point radio configuration, client associations, and RF statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NORTEL-WLAN-AP-MIB?

NORTEL-WLAN-AP-MIB is a Nortel Networks proprietary MIB (built on the SynOptics-heritage SYNOPTICS-ROOT-MIB) reporting hardware/firmware and serial/Ethernet port status on Nortel Wireless LAN Access Points. Its objects cover hardware/boot-ROM/opcode firmware version, country code, and data-file version, a serial-line table (data bits, parity, speed, stop bits), and a port table (name, type, admin speed/duplex config, flow-control config, capabilities, autonegotiation, operational speed/duplex and flow-control status), alongside firmware-transfer start/type actions. As a hardware/software-status MIB it lets an administrator confirm an AP's firmware version and country-code regulatory setting, and trigger a firmware transfer. It is deployed on Nortel Networks Wireless LAN Access Points. Engineers can download the NORTEL-WLAN-AP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NORTEL-WLAN-AP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Networks Wireless LAN Access Points

Monitoring Examples

An administrator checks ntWlanSwCountryCode to confirm a Nortel wireless AP is configured for the correct regulatory domain before deployment in a new country.

What Can Be Monitored

AP firmware version and port speed/duplex status

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE
ifPhysAddress	OBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From SYNOPTICS-ROOT-MIB

wlan2200

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using ntWlanApMUStatsPacketsIn OID:

Select a Nortel Networks Wireless LAN Access Point as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ntWlanApMUStatsPacketsIn into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the packets received from this MU. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nortelWlanApMib	1.3.6.1.4.1.45.1.11.1			Nortel Wireless LAN AP MIB Copyright 2003-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
ntWlanApSys	1.3.6.1.4.1.45.1.11.1.1
STR ntWlanSwHardwareVer	1.3.6.1.4.1.45.1.11.1.1.1	DisplayString	read-only	Hardware version of the main board.
STR ntWlanSwBootRomVer	1.3.6.1.4.1.45.1.11.1.1.2	DisplayString	read-only	Boot ROM code version of the main board.
STR ntWlanSwOpCodeVer	1.3.6.1.4.1.45.1.11.1.1.3	DisplayString	read-only	Operation code version of the main board.
STR ntWlanSwCountryCode	1.3.6.1.4.1.45.1.11.1.1.4	DisplayString	read-write	Country code of the AP. AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA, AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS, CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT, EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA, HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH_KOREA, KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO, NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA, SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA, ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY, UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM
STR ntWlanSwNNDataFileVer	1.3.6.1.4.1.45.1.11.1.1.5	DisplayString	read-only	Nortel Networks Customization Data File Version.
ntWlanApLineMgnt	1.3.6.1.4.1.45.1.11.1.2
ntWlanLineTable	1.3.6.1.4.1.45.1.11.1.2.1		not-accessible	Table of descriptive and status information about configuration of each RS-232 line in this system
ntWlanLineEntry	1.3.6.1.4.1.45.1.11.1.2.1.1		not-accessible	An entry in the table, containing information about configuration in one RS232 line of the Access Point.
I32 ntWlanLineIndex	1.3.6.1.4.1.45.1.11.1.2.1.1.1	Integer32	not-accessible	This is defined as RS-232 index.
I32 ntWlanLineDataBits	1.3.6.1.4.1.45.1.11.1.2.1.1.2	Integer32	read-only	This is defined as number of data bits for the RS232 interface.
INT ntWlanLineParity	1.3.6.1.4.1.45.1.11.1.2.1.1.3	INTEGER	read-only	This is defined as parity of the RS232 interface.
I32 ntWlanLineSpeed	1.3.6.1.4.1.45.1.11.1.2.1.1.4	Integer32	read-only	This is defined as the speed of the RS-232 interface.
I32 ntWlanLineStopBits	1.3.6.1.4.1.45.1.11.1.2.1.1.5	Integer32	read-only	This is defined as the number of stop bits for the RS-232 interface.
ntWlanApPortMgnt	1.3.6.1.4.1.45.1.11.1.3
ntWlanPortTable	1.3.6.1.4.1.45.1.11.1.3.1		not-accessible	Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
ntWlanPortEntry	1.3.6.1.4.1.45.1.11.1.3.1.1		not-accessible	An entry in the table, containing information about configuration in one switch port of the switch.
NUM ntWlanPortIndex	1.3.6.1.4.1.45.1.11.1.3.1.1.1	InterfaceIndex	not-accessible	This is defined as ifIndex in the IF-MIB.
STR ntWlanPortName	1.3.6.1.4.1.45.1.11.1.3.1.1.2	DisplayString	read-only	Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
INT ntWlanPortType	1.3.6.1.4.1.45.1.11.1.3.1.1.3	INTEGER	read-only	Indicates the port type.
INT ntWlanPortSpeedDpxCfg	1.3.6.1.4.1.45.1.11.1.3.1.1.4	INTEGER	read-only	Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
INT ntWlanPortFlowCtrlCfg	1.3.6.1.4.1.45.1.11.1.3.1.1.5	INTEGER	read-only	(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
INT ntWlanPortCapabilities	1.3.6.1.4.1.45.1.11.1.3.1.1.6	INTEGER	read-only	Port capabilities.
INT ntWlanPortAutonegotiation	1.3.6.1.4.1.45.1.11.1.3.1.1.7	INTEGER	read-only	Whether autonegotiation is enabled.
INT ntWlanPortSpeedDpxStatus	1.3.6.1.4.1.45.1.11.1.3.1.1.8	INTEGER	read-only	The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
INT ntWlanPortFlowCtrlStatus	1.3.6.1.4.1.45.1.11.1.3.1.1.9	INTEGER	read-only	(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
ntWlanApFileTransferMgt	1.3.6.1.4.1.45.1.11.1.4
INT ntWlanTransferStart	1.3.6.1.4.1.45.1.11.1.4.1	INTEGER	read-write	Set to go(1) to start a transfer.
INT ntWlanTransferType	1.3.6.1.4.1.45.1.11.1.4.2	INTEGER	read-write	Type of file to transfer.
INT ntWlanFileType	1.3.6.1.4.1.45.1.11.1.4.3	INTEGER	read-write	Type of file to transfer.
STR ntWlanSrcFile	1.3.6.1.4.1.45.1.11.1.4.4	DisplayString	read-write	The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
STR ntWlanDestFile	1.3.6.1.4.1.45.1.11.1.4.5	DisplayString	read-write	The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
IP ntWlanFileServer	1.3.6.1.4.1.45.1.11.1.4.6	IpAddress	read-write	The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
STR ntWlanUserName	1.3.6.1.4.1.45.1.11.1.4.7	DisplayString	read-write	The username specified for an FTP Transfer.
STR ntWlanPassword	1.3.6.1.4.1.45.1.11.1.4.8	DisplayString	read-write	The password specified for an FTP Transfer.
INT ntWlanFileTransferStatus	1.3.6.1.4.1.45.1.11.1.4.9	INTEGER	read-only	The status of the current FTP Transfer process.
ntWlanApResetMgt	1.3.6.1.4.1.45.1.11.1.5
STR ntWlanRestartOpCodeFile	1.3.6.1.4.1.45.1.11.1.5.1	DisplayString	read-write	Name of op-code file for start-up.
INT ntWlanRestartControl	1.3.6.1.4.1.45.1.11.1.5.2	INTEGER	read-write	Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
ntWlanApIpMgt	1.3.6.1.4.1.45.1.11.1.6
IP ntWlanNetConfigIPAddress	1.3.6.1.4.1.45.1.11.1.6.1	IpAddress	read-write	The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
IP ntWlanNetConfigSubnetMask	1.3.6.1.4.1.45.1.11.1.6.2	IpAddress	read-write	The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
IP ntWlanNetDefaultGateway	1.3.6.1.4.1.45.1.11.1.6.3	IpAddress	read-write	The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
INT ntWlanIpHttpState	1.3.6.1.4.1.45.1.11.1.6.4	INTEGER	read-write	Whether HTTP is enabled.
INT ntWlanIpHttpPort	1.3.6.1.4.1.45.1.11.1.6.5	INTEGER	read-write	The port number for HTTP.
ntWlanApDot11	1.3.6.1.4.1.45.1.11.1.7
ntWlanDot11Phy	1.3.6.1.4.1.45.1.11.1.7.4
ntWlanDot11PhyOperationTable	1.3.6.1.4.1.45.1.11.1.7.4.1		not-accessible	Table of descriptive and status information about configuration of each radio of the AP.
ntWlanDot11PhyOperationEntry	1.3.6.1.4.1.45.1.11.1.7.4.1.1		not-accessible	An entry in the table, containing information about configuration in one radio of the AP.
I32 ntWlanDot11Index	1.3.6.1.4.1.45.1.11.1.7.4.1.1.1	Integer32	not-accessible	Radio index of the AP.
INT ntWlanDot11TurboModeEnabled	1.3.6.1.4.1.45.1.11.1.7.4.1.1.3	INTEGER	read-only	This attribute, when true, shall indicate that the nortel's propietory turbo mode option is enabled. The default value of this attribute shall be false.
INT ntWlanDot11PreambleLength	1.3.6.1.4.1.45.1.11.1.7.4.1.1.4	INTEGER	read-write	This attribute determines whether or not a short or a long preamble is used to delineate 802.11 frames.
T/F ntWlanDot11dWorldModeEnabled	1.3.6.1.4.1.45.1.11.1.7.4.1.1.5	TruthValue	read-write	This attribute determines whether 802.11d world mode is enabled for this radio.
T/F ntWlanDot11ClosedSystem	1.3.6.1.4.1.45.1.11.1.7.4.1.1.6	TruthValue	read-write	This attribute determines whether the radio operates as a closed system. When configured as a closed system, the SSID is not included when broadcasting periodic beacon frames.
ntWlanDot11AuthenticationEntry	1.3.6.1.4.1.45.1.11.1.7.5
T/F ntWlanDot118021xSupport	1.3.6.1.4.1.45.1.11.1.7.5.1	TruthValue	read-write	This attribute, when true(1), indicates that the Enterprise Access Point supports the 802.1x authentication algorithm.
T/F ntWlanDot118021xRequired	1.3.6.1.4.1.45.1.11.1.7.5.2	TruthValue	read-write	This attribute, when true(1), indicates that the Enterprise Access Point requires successful 802.1x authentication for any clients accessing the network.
I32 ntWlanDot118021xBcastKeyRefresh	1.3.6.1.4.1.45.1.11.1.7.5.3	Integer32	read-write	The broadcast key refresh rate.
I32 ntWlanDot118021xSessKeyRefresh	1.3.6.1.4.1.45.1.11.1.7.5.4	Integer32	read-write	The session key refresh rate.
I32 ntWlanDot118021xReAuthRefresh	1.3.6.1.4.1.45.1.11.1.7.5.5	Integer32	read-write	The re-authentication refresh rate.
ntWlanDot11AuthenticationServerTable	1.3.6.1.4.1.45.1.11.1.7.6		not-accessible	Table of descriptive and status information about configuration of each authentication server.
ntWlanDot11AuthenticationServerEntry	1.3.6.1.4.1.45.1.11.1.7.6.1		not-accessible	An entry in the table, containing information about configuration in one radio of the AP.
I32 ntWlanDot11ServerIndex	1.3.6.1.4.1.45.1.11.1.7.6.1.1	Integer32	not-accessible	Radio index of the AP.
IP ntWlanDot11AuthenticationServer	1.3.6.1.4.1.45.1.11.1.7.6.1.2	IpAddress	read-write	This values indicates the IP address of the authentication server.
INT ntWlanDot11AuthenticationPort	1.3.6.1.4.1.45.1.11.1.7.6.1.3	INTEGER	read-write	This values indicates the UDP Port used by the primary authentication server.
STR ntWlanDot11AuthenticationKey	1.3.6.1.4.1.45.1.11.1.7.6.1.4	DisplayString	read-write	This values indicates the shared key used by the authentication server.
INT ntWlanDot11AuthenticationRetransmit	1.3.6.1.4.1.45.1.11.1.7.6.1.5	INTEGER	read-write	This values indicates the retransmit timer length used by the authentication server.
INT ntWlanDot11AuthenticationTimeout	1.3.6.1.4.1.45.1.11.1.7.6.1.6	INTEGER	read-write	This values indicates the Timeout value(sec) used by the authentication server.
IP ntWlanDot11SecondaryAuthServer	1.3.6.1.4.1.45.1.11.1.7.6.1.7	IpAddress	read-write	This values indicates the IP address of the secondary authentication server.
INT ntWlanDot11SecondaryAuthPort	1.3.6.1.4.1.45.1.11.1.7.6.1.8	INTEGER	read-write	This values indicates the UDP Port used by the primary secondary authentication server.
STR ntWlanDot11SecondaryAuthKey	1.3.6.1.4.1.45.1.11.1.7.6.1.9	DisplayString	read-write	This values indicates the shared key used by the secondary authentication server.
INT ntWlanDot11SecondaryAuthRetransmit	1.3.6.1.4.1.45.1.11.1.7.6.1.10	INTEGER	read-write	This values indicates the retransmit timer length used by the secondary authentication server.
INT ntWlanDot11SecondaryAuthTimeout	1.3.6.1.4.1.45.1.11.1.7.6.1.11	INTEGER	read-write	This values indicates the Timeout value(sec) used by the secondary authentication server.
ntWlanDot11FilterTable	1.3.6.1.4.1.45.1.11.1.7.7		not-accessible	Table of status information about each configured MAC Address Filtering Entry.
ntWlanDot11FilterEntry	1.3.6.1.4.1.45.1.11.1.7.7.1		not-accessible	An entry in the table, containing information about configuration in one radio of the AP.
I32 ntWlanDot11FilterIndex	1.3.6.1.4.1.45.1.11.1.7.7.1.1	Integer32	not-accessible	Filter index.
PHY ntWlanDot11FilterAddress	1.3.6.1.4.1.45.1.11.1.7.7.1.2	PhysAddress	read-write	This values indicates the MAC address of the filter entry.
INT ntWlanDot11FilterStatus	1.3.6.1.4.1.45.1.11.1.7.7.1.3	INTEGER	read-write	This values indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client.
ntWlanDot11TrapTable	1.3.6.1.4.1.45.1.11.1.7.9		not-accessible	Table of status information for Association and Disassociation Trap
ntWlanDot11TrapEntry	1.3.6.1.4.1.45.1.11.1.7.9.1		not-accessible	An entry in the table, containing information for the association and disassociation trap.
I32 ntWlanDot11InterfaceIndex	1.3.6.1.4.1.45.1.11.1.7.9.1.1	Integer32	not-accessible	Interface index.
PHY ntWlanDot11AssociationStationAddress	1.3.6.1.4.1.45.1.11.1.7.9.1.2	PhysAddress	read-only	This values indicates the MAC address of the Mobile Unit associating with this Access Point.
PHY ntWlanDot11DisassociationStationAddress	1.3.6.1.4.1.45.1.11.1.7.9.1.3	PhysAddress	read-only	This values indicates the MAC address of the Mobile Unit no longer associated with this Access Point.
INT ntWlanDot11AssociationMU	1.3.6.1.4.1.45.1.11.1.7.9.1.4	INTEGER	read-only	This values indicates the number of Mobile Units associated on the Interface
ntWlanApTraps	1.3.6.1.4.1.45.1.11.1.8
ntWlanApTraps0	1.3.6.1.4.1.45.1.11.1.8.0
NTF ntWlanApDot1xAuthenticationFail	1.3.6.1.4.1.45.1.11.1.8.0.101			Indicates that a Mobile Unit failed 802.1x authentication. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit.
NTF ntWlanApMuAssocTrap	1.3.6.1.4.1.45.1.11.1.8.0.111			Indicates that there is a Mobile Unit associating with this Access Point. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units associate with the Access Point at the same time, ntWlanDot11AssociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
NTF ntWlanApMuDisAssocTrap	1.3.6.1.4.1.45.1.11.1.8.0.112			Indicates that there is one Mobile Unit no longer associating with this Access Point anymore. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11DisassociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units un-associate with the Access Point at the same time, ntWlanDot11DisassociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
NTF ntWlanApMuWEPAuthFail	1.3.6.1.4.1.45.1.11.1.8.0.113			Indicates that WEP authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
NTF ntWlanApMuWPAAuthFail	1.3.6.1.4.1.45.1.11.1.8.0.114			Indicates that WPA authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
T/F ntWlanApMuAssocTrapEnabled	1.3.6.1.4.1.45.1.11.1.8.1	TruthValue	read-write	This object controls whether ntWlanApMuAssocTrap notifications will be generated when an MU associates with the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
T/F ntWlanApMuDisAssocTrapEnabled	1.3.6.1.4.1.45.1.11.1.8.2	TruthValue	read-write	This object controls whether ntWlanApMuDisAssocTrap notifications will be generated when an MU disassociates from the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
ntWlanApLID	1.3.6.1.4.1.45.1.11.1.9
T/F ntWlanApLIDCheckEtherLinkEnabled	1.3.6.1.4.1.45.1.11.1.9.1	TruthValue	read-write	Indicates whether checks for ethernet link integrity are enabled.
T/F ntWlanApLIDCheckIPLinkEnabled	1.3.6.1.4.1.45.1.11.1.9.2	TruthValue	read-write	Indicates whether checks for IP link integrity are enabled.
IP ntWlanApLIDCheckIpLinkAddress	1.3.6.1.4.1.45.1.11.1.9.3	IpAddress	read-write	The IP address to ping to check IP link integrity.
ntWlanApRateSupport	1.3.6.1.4.1.45.1.11.1.10
ntWlanApRateSupportTable	1.3.6.1.4.1.45.1.11.1.10.1		not-accessible	Table to configure which hardware-supported rates are actively supported, and which are basic rates required for an MU to connect to an AP. Entries must exist in this table for every hardware-supported rate for each appropriate ifIndex value.
ntWlanApRateSupportEntry	1.3.6.1.4.1.45.1.11.1.10.1.1		not-accessible	An entry in the ntWlanApRateSupportTable.
NUM ntWlanApRateSupportIfIndex	1.3.6.1.4.1.45.1.11.1.10.1.1.1	InterfaceIndex	not-accessible	The ifIndex value of the radio.
NTW ntWlanApRateSupportSpeed	1.3.6.1.4.1.45.1.11.1.10.1.1.2	NtWlanApDataRate	not-accessible	A supported data rate.
INT ntWlanApRateSupportLevel	1.3.6.1.4.1.45.1.11.1.10.1.1.3	INTEGER	read-write	This object indicates whether a specific rate is currently supported, and if so, whether it is a basic rate. off - indicates that this rate is not currently supported. supported - indicates that this rate is currently supported, but is not required to be supported by an MU in order to connect to this radio. supportedBasic - indicates that this rate is currently supported as a basic rate, and an MU must also support this rate in order to connect to this radio.
ntWlanApSecurity	1.3.6.1.4.1.45.1.11.1.11
ntWlanApSecurityTable	1.3.6.1.4.1.45.1.11.1.11.1		not-accessible	Table to configure WEP and WPA security parameters. Entries are per-radio.
ntWlanApSecurityEntry	1.3.6.1.4.1.45.1.11.1.11.1.1		not-accessible	An entry in the ntWlanApSecurityTable.
NUM ntWlanApSecurityIfIndex	1.3.6.1.4.1.45.1.11.1.11.1.1.1	InterfaceIndex	not-accessible	The ifIndex value of the radio.
T/F ntWlanApSecurityEnabled	1.3.6.1.4.1.45.1.11.1.11.1.1.2	TruthValue	read-write	Indicates whether security is enabled for a radio.
INT ntWlanApSecurityWEPAuthType	1.3.6.1.4.1.45.1.11.1.11.1.1.3	INTEGER	read-write	The WEP authentication type.
INT ntWlanApSecurityWEPKeyLength	1.3.6.1.4.1.45.1.11.1.11.1.1.4	INTEGER	read-write	Indicates the WEP key length being used.
I32 ntWlanApSecurityWEPActiveKey	1.3.6.1.4.1.45.1.11.1.11.1.1.5	Integer32	read-write	Indicates which WEP key is currently in use.
NTW ntWlanApSecurityWEPKey1	1.3.6.1.4.1.45.1.11.1.11.1.1.6	NtWlanApWEPKey	read-write	The first WEP key. Retrieval of this object will always return an empty string.
NTW ntWlanApSecurityWEPKey2	1.3.6.1.4.1.45.1.11.1.11.1.1.7	NtWlanApWEPKey	read-write	The second WEP key. Retrieval of this object will always return an empty string.
NTW ntWlanApSecurityWEPKey3	1.3.6.1.4.1.45.1.11.1.11.1.1.8	NtWlanApWEPKey	read-write	The third WEP key. Retrieval of this object will always return an empty string.
NTW ntWlanApSecurityWEPKey4	1.3.6.1.4.1.45.1.11.1.11.1.1.9	NtWlanApWEPKey	read-write	The fourth WEP key. Retrieval of this object will always return an empty string.
INT ntWlanApSecurityWPASupport	1.3.6.1.4.1.45.1.11.1.11.1.1.10	INTEGER	read-write	Indicates whether WPA security is supported.
INT ntWlanApSecurityWPAMode	1.3.6.1.4.1.45.1.11.1.11.1.1.11	INTEGER	read-write	The WPA mode.
OCT ntWlanApSecurityWPAPreSharedKey	1.3.6.1.4.1.45.1.11.1.11.1.1.12	OCTET STRING	read-write	The WPA pre-shared key.
INT ntWlanApSecurityWPAMcastCypherMode	1.3.6.1.4.1.45.1.11.1.11.1.1.13	INTEGER	read-write	The multicast cypher mode.
ntWlanApQoS	1.3.6.1.4.1.45.1.11.1.12
INT ntWlanApQoSMode	1.3.6.1.4.1.45.1.11.1.12.1	INTEGER	read-write	This object indicates the QoS mode being used. off - indicates QoS features are disabled. etherSrc - indicates that the ethernet source MAC address of received packets is mapped to an egress queue. etherDst - indicates that the ethernet destination MAC address of received packets is mapped to an egress queue. etherType - indicates that the ethernet type of of received packets is mapped to an egress queue. directPriorityMap - indicates that the priority value of received packets is used to map directly to an egress queue.
ntWlanApQoSEtherTypeToQueueTable	1.3.6.1.4.1.45.1.11.1.12.2		not-accessible	Table to configure mappings from ethernet type to queue number.
ntWlanApQoSEtherTypeToQueueEntry	1.3.6.1.4.1.45.1.11.1.12.2.1		not-accessible	An entry in the ntWlanApQoSTable.
I32 ntWlanApQoSEtherTypeToQueueIndex	1.3.6.1.4.1.45.1.11.1.12.2.1.1	Integer32	not-accessible	An ethernet type, to be mapped to a queue.
I32 ntWlanApQoSEtherTypeToQueueNumber	1.3.6.1.4.1.45.1.11.1.12.2.1.2	Integer32	read-write	The queue number to which the ether type is mapped.
ROW ntWlanApQoSEtherTypeToQueueRowStatus	1.3.6.1.4.1.45.1.11.1.12.2.1.3	RowStatus	read-write	This object is used to create and destroy entries in this table.
ntWlanApQoSMACToQueueTable	1.3.6.1.4.1.45.1.11.1.12.3		not-accessible	Table to configure mappings from ethernet MAC address to queue number.
ntWlanApQoSMACToQueueEntry	1.3.6.1.4.1.45.1.11.1.12.3.1		not-accessible	An entry in the ntWlanApQoSTable.
MAC ntWlanApQoSMACToQueueAddress	1.3.6.1.4.1.45.1.11.1.12.3.1.1	MacAddress	not-accessible	An ethernet MAC address, to be mapped to a queue.
I32 ntWlanApQoSMACToQueueNumber	1.3.6.1.4.1.45.1.11.1.12.3.1.2	Integer32	read-write	The queue number to which the MAC address is mapped.
ROW ntWlanApQoSMACToQueueRowStatus	1.3.6.1.4.1.45.1.11.1.12.3.1.3	RowStatus	read-write	This object is used to create and destroy entries in this table.
ntWlanApVlan	1.3.6.1.4.1.45.1.11.1.13
T/F ntWlanApVlanEnabled	1.3.6.1.4.1.45.1.11.1.13.1	TruthValue	read-write	This object indicates whether Vlan support is enabled.
ntWlanApVlanTable	1.3.6.1.4.1.45.1.11.1.13.2		not-accessible	Table to configure the default VID per-radio.
ntWlanApVlanEntry	1.3.6.1.4.1.45.1.11.1.13.2.1		not-accessible	An entry in the ntWlanApVlanTable.
NUM ntWlanApVlanIfIndex	1.3.6.1.4.1.45.1.11.1.13.2.1.1	InterfaceIndex	not-accessible	The ifIndex value of the radio.
I32 ntWlanApVlanDefaultVid	1.3.6.1.4.1.45.1.11.1.13.2.1.2	Integer32	read-write	The default VID of the radio.
ntWlanApVlanMUMACToVidTable	1.3.6.1.4.1.45.1.11.1.13.3		not-accessible	Table containing mappings from Mobile Unit MAC addresses to VLAN ID values.
ntWlanApVlanMUMACToVidEntry	1.3.6.1.4.1.45.1.11.1.13.3.1		not-accessible	An entry in the ntWlanApVlanMUMACToVidTable.
MAC ntWlanApVlanMUMACToVidAddress	1.3.6.1.4.1.45.1.11.1.13.3.1.1	MacAddress	not-accessible	The ethernet MAC address of a Mobile Unit.
I32 ntWlanApVlanMUMACToVidNumber	1.3.6.1.4.1.45.1.11.1.13.3.1.2	Integer32	read-write	The VID to which this Mobile Unit's MAC is mapped.
ntWlanApStats	1.3.6.1.4.1.45.1.11.1.14
ntWlanApMUStatsTable	1.3.6.1.4.1.45.1.11.1.14.1		not-accessible	Table of per-Mobile Unit statistics.
ntWlanApMUStatsEntry	1.3.6.1.4.1.45.1.11.1.14.1.1		not-accessible	An entry in the ntWlanApMUStatsTable.
MAC ntWlanApMUStatsMUAddress	1.3.6.1.4.1.45.1.11.1.14.1.1.1	MacAddress	not-accessible	The ethernet MAC address of the Mobile Unit.
C32 ntWlanApMUStatsPacketsInEx	1.3.6.1.4.1.45.1.11.1.14.1.1.2	Counter32	read-only	A count of the packets received from this MU.
C32 ntWlanApMUStatsPacketsOut	1.3.6.1.4.1.45.1.11.1.14.1.1.3	Counter32	read-only	A count of the packets sent to this MU.
C32 ntWlanApMUStatsOctetsIn	1.3.6.1.4.1.45.1.11.1.14.1.1.4	Counter32	read-only	A count of the octets received from this MU.
C32 ntWlanApMUStatsOctetsOut	1.3.6.1.4.1.45.1.11.1.14.1.1.5	Counter32	read-only	A count of the octets sent to this MU.

RFC description

Nortel wireless LAN access point management; provides objects for AP configuration, authentication, and client association traps.

Start monitoring Nortel Networks Wireless LAN Access Point with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NORTEL-WLAN-AP-MIB