NETCOR-MIB

All MIBs › NETCOR-MIB

Category: Network Management

Description: Manages configuration and operational status of NetCor network correlation and management systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETCOR-MIB?

NETCOR-MIB is a vendor-specific MIB associated with NetCor network correlation and management systems, intended to represent that platform's configuration and operational state via SNMP. Based on its stated purpose it would be expected to expose general configuration parameters and high-level operational/status indicators for the NetCor management system rather than detailed hardware sensor data. No module description or sample object names were available in the provided source material, so it is not possible to confirm whether it exposes specific hardware/software health indicators such as uptime, CPU/memory load, or component status. No dependency information on other MIBs or standards could be determined from the available material either. It is presumably deployed in network operations centers wherever the NetCor correlation/management platform is running, for basic device-level configuration and status reporting, and a NETCOR-MIB download is typically the starting point for compiling it into a monitoring system.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETCOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NetCor network correlation/management platform

Monitoring Examples

No sample object names or module description text were supplied for this MIB, so a concrete, grounded polling scenario cannot be honestly constructed without inventing object names not evidenced in the source. Based only on the short description, the module would likely expose configuration and status objects for the NetCor platform, but the specific tables or scalars involved are unconfirmed.

Imported Objects

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access
internet	1.3.6.1
mgmt	1.3.6.1.2
mib_2	1.3.6.1.2.1
system	1.3.6.1.2.1.1
STR sysDescr	1.3.6.1.2.1.1.1	DisplayString	read-only
OID sysObjectID	1.3.6.1.2.1.1.2	OBJECT IDENTIFIER	read-only
TIK sysUpTime	1.3.6.1.2.1.1.3	TimeTicks	read-only
STR sysContact	1.3.6.1.2.1.1.4	DisplayString	read-write
STR sysName	1.3.6.1.2.1.1.5	DisplayString	read-write
STR sysLocation	1.3.6.1.2.1.1.6	DisplayString	read-write
INT sysServices	1.3.6.1.2.1.1.7	INTEGER	read-only
interfaces	1.3.6.1.2.1.2
INT ifNumber	1.3.6.1.2.1.2.1	INTEGER	read-only
ifTable	1.3.6.1.2.1.2.2		not-accessible
ifEntry	1.3.6.1.2.1.2.2.1		not-accessible
INT ifIndex	1.3.6.1.2.1.2.2.1.1	INTEGER	read-only
STR ifDescr	1.3.6.1.2.1.2.2.1.2	DisplayString	read-only
INT ifType	1.3.6.1.2.1.2.2.1.3	INTEGER	read-only
INT ifMtu	1.3.6.1.2.1.2.2.1.4	INTEGER	read-only
GAU ifSpeed	1.3.6.1.2.1.2.2.1.5	Gauge	read-only
PHY ifPhysAddress	1.3.6.1.2.1.2.2.1.6	PhysAddress	read-only
INT ifAdminStatus	1.3.6.1.2.1.2.2.1.7	INTEGER	read-write
INT ifOperStatus	1.3.6.1.2.1.2.2.1.8	INTEGER	read-only
TIK ifLastChange	1.3.6.1.2.1.2.2.1.9	TimeTicks	read-only
CTR ifInOctets	1.3.6.1.2.1.2.2.1.10	Counter	read-only
CTR ifInUcastPkts	1.3.6.1.2.1.2.2.1.11	Counter	read-only
CTR ifInNUcastPkts	1.3.6.1.2.1.2.2.1.12	Counter	read-only
CTR ifInDiscards	1.3.6.1.2.1.2.2.1.13	Counter	read-only
CTR ifInErrors	1.3.6.1.2.1.2.2.1.14	Counter	read-only
CTR ifInUnknownProtos	1.3.6.1.2.1.2.2.1.15	Counter	read-only
CTR ifOutOctets	1.3.6.1.2.1.2.2.1.16	Counter	read-only
CTR ifOutUcastPkts	1.3.6.1.2.1.2.2.1.17	Counter	read-only
CTR ifOutNUcastPkts	1.3.6.1.2.1.2.2.1.18	Counter	read-only
CTR ifOutDiscards	1.3.6.1.2.1.2.2.1.19	Counter	read-only
CTR ifOutErrors	1.3.6.1.2.1.2.2.1.20	Counter	read-only
GAU ifOutQLen	1.3.6.1.2.1.2.2.1.21	Gauge	read-only
OID ifSpecific	1.3.6.1.2.1.2.2.1.22	OBJECT IDENTIFIER	read-only
at	1.3.6.1.2.1.3
atTable	1.3.6.1.2.1.3.1		not-accessible
atEntry	1.3.6.1.2.1.3.1.1		not-accessible
INT atIfIndex	1.3.6.1.2.1.3.1.1.1	INTEGER	read-only
PHY atPhysAddress	1.3.6.1.2.1.3.1.1.2	PhysAddress	read-write
IP atNetAddress	1.3.6.1.2.1.3.1.1.3	IpAddress	read-write
ip	1.3.6.1.2.1.4
INT ipForwarding	1.3.6.1.2.1.4.1	INTEGER	read-only
INT ipDefaultTTL	1.3.6.1.2.1.4.2	INTEGER	read-write
CTR ipInReceives	1.3.6.1.2.1.4.3	Counter	read-only
CTR ipInHdrErrors	1.3.6.1.2.1.4.4	Counter	read-only
CTR ipInAddrErrors	1.3.6.1.2.1.4.5	Counter	read-only
CTR ipForwDatagrams	1.3.6.1.2.1.4.6	Counter	read-only
CTR ipInUnknownProtos	1.3.6.1.2.1.4.7	Counter	read-only
CTR ipInDiscards	1.3.6.1.2.1.4.8	Counter	read-only
CTR ipInDelivers	1.3.6.1.2.1.4.9	Counter	read-only
CTR ipOutRequests	1.3.6.1.2.1.4.10	Counter	read-only
CTR ipOutDiscards	1.3.6.1.2.1.4.11	Counter	read-only
CTR ipOutNoRoutes	1.3.6.1.2.1.4.12	Counter	read-only
INT ipReasmTimeout	1.3.6.1.2.1.4.13	INTEGER	read-only
CTR ipReasmReqds	1.3.6.1.2.1.4.14	Counter	read-only
CTR ipReasmOKs	1.3.6.1.2.1.4.15	Counter	read-only
CTR ipReasmFails	1.3.6.1.2.1.4.16	Counter	read-only
CTR ipFragOKs	1.3.6.1.2.1.4.17	Counter	read-only
CTR ipFragFails	1.3.6.1.2.1.4.18	Counter	read-only
CTR ipFragCreates	1.3.6.1.2.1.4.19	Counter	read-only
ipAddrTable	1.3.6.1.2.1.4.20		not-accessible
ipAddrEntry	1.3.6.1.2.1.4.20.1		not-accessible
IP ipAdEntAddr	1.3.6.1.2.1.4.20.1.1	IpAddress	read-only
INT ipAdEntIfIndex	1.3.6.1.2.1.4.20.1.2	INTEGER	read-only
IP ipAdEntNetMask	1.3.6.1.2.1.4.20.1.3	IpAddress	read-only
INT ipAdEntBcastAddr	1.3.6.1.2.1.4.20.1.4	INTEGER	read-only
INT ipAdEntReasmMaxSiz	1.3.6.1.2.1.4.20.1.5	INTEGER	read-only
ipRouteTable	1.3.6.1.2.1.4.21		not-accessible
ipRouteEntry	1.3.6.1.2.1.4.21.1		not-accessible
IP ipRouteDest	1.3.6.1.2.1.4.21.1.1	IpAddress	read-write
INT ipRouteIfIndex	1.3.6.1.2.1.4.21.1.2	INTEGER	read-write
INT ipRouteMetric1	1.3.6.1.2.1.4.21.1.3	INTEGER	read-write
INT ipRouteMetric2	1.3.6.1.2.1.4.21.1.4	INTEGER	read-write
INT ipRouteMetric3	1.3.6.1.2.1.4.21.1.5	INTEGER	read-write
INT ipRouteMetric4	1.3.6.1.2.1.4.21.1.6	INTEGER	read-write
IP ipRouteNextHop	1.3.6.1.2.1.4.21.1.7	IpAddress	read-write
INT ipRouteType	1.3.6.1.2.1.4.21.1.8	INTEGER	read-write
INT ipRouteProto	1.3.6.1.2.1.4.21.1.9	INTEGER	read-only
INT ipRouteAge	1.3.6.1.2.1.4.21.1.10	INTEGER	read-write
IP ipRouteMask	1.3.6.1.2.1.4.21.1.11	IpAddress	read-write
INT ipRouteMetric5	1.3.6.1.2.1.4.21.1.12	INTEGER	read-write
OID ipRouteInfo	1.3.6.1.2.1.4.21.1.13	OBJECT IDENTIFIER	read-only
ipNetToMediaTable	1.3.6.1.2.1.4.22		not-accessible
ipNetToMediaEntry	1.3.6.1.2.1.4.22.1		not-accessible
INT ipNetToMediaIfIndex	1.3.6.1.2.1.4.22.1.1	INTEGER	read-only
PHY ipNetToMediaPhysAddress	1.3.6.1.2.1.4.22.1.2	PhysAddress	read-write
IP ipNetToMediaNetAddress	1.3.6.1.2.1.4.22.1.3	IpAddress	read-write
INT ipNetToMediaType	1.3.6.1.2.1.4.22.1.4	INTEGER	read-write
CTR ipRoutingDiscards	1.3.6.1.2.1.4.23	Counter	read-only
icmp	1.3.6.1.2.1.5
CTR icmpInMsgs	1.3.6.1.2.1.5.1	Counter	read-only
CTR icmpInErrors	1.3.6.1.2.1.5.2	Counter	read-only
CTR icmpInDestUnreachs	1.3.6.1.2.1.5.3	Counter	read-only
CTR icmpInTimeExcds	1.3.6.1.2.1.5.4	Counter	read-only
CTR icmpInParmProbs	1.3.6.1.2.1.5.5	Counter	read-only
CTR icmpInSrcQuenchs	1.3.6.1.2.1.5.6	Counter	read-only
CTR icmpInRedirects	1.3.6.1.2.1.5.7	Counter	read-only
CTR icmpInEchos	1.3.6.1.2.1.5.8	Counter	read-only
CTR icmpInEchoReps	1.3.6.1.2.1.5.9	Counter	read-only
CTR icmpInTimestamps	1.3.6.1.2.1.5.10	Counter	read-only
CTR icmpInTimestampReps	1.3.6.1.2.1.5.11	Counter	read-only
CTR icmpInAddrMasks	1.3.6.1.2.1.5.12	Counter	read-only
CTR icmpInAddrMaskReps	1.3.6.1.2.1.5.13	Counter	read-only
CTR icmpOutMsgs	1.3.6.1.2.1.5.14	Counter	read-only
CTR icmpOutErrors	1.3.6.1.2.1.5.15	Counter	read-only
CTR icmpOutDestUnreachs	1.3.6.1.2.1.5.16	Counter	read-only
CTR icmpOutTimeExcds	1.3.6.1.2.1.5.17	Counter	read-only
CTR icmpOutParmProbs	1.3.6.1.2.1.5.18	Counter	read-only
CTR icmpOutSrcQuenchs	1.3.6.1.2.1.5.19	Counter	read-only
CTR icmpOutRedirects	1.3.6.1.2.1.5.20	Counter	read-only
CTR icmpOutEchos	1.3.6.1.2.1.5.21	Counter	read-only
CTR icmpOutEchoReps	1.3.6.1.2.1.5.22	Counter	read-only
CTR icmpOutTimestamps	1.3.6.1.2.1.5.23	Counter	read-only
CTR icmpOutTimestampReps	1.3.6.1.2.1.5.24	Counter	read-only
CTR icmpOutAddrMasks	1.3.6.1.2.1.5.25	Counter	read-only
CTR icmpOutAddrMaskReps	1.3.6.1.2.1.5.26	Counter	read-only
tcp	1.3.6.1.2.1.6
udp	1.3.6.1.2.1.7
CTR udpInDatagrams	1.3.6.1.2.1.7.1	Counter	read-only
CTR udpNoPorts	1.3.6.1.2.1.7.2	Counter	read-only
CTR udpInErrors	1.3.6.1.2.1.7.3	Counter	read-only
CTR udpOutDatagrams	1.3.6.1.2.1.7.4	Counter	read-only
udpTable	1.3.6.1.2.1.7.5		not-accessible
udpEntry	1.3.6.1.2.1.7.5.1		not-accessible
IP udpLocalAddress	1.3.6.1.2.1.7.5.1.1	IpAddress	read-only
INT udpLocalPort	1.3.6.1.2.1.7.5.1.2	INTEGER	read-only
egp	1.3.6.1.2.1.8
transmission	1.3.6.1.2.1.10
snmp	1.3.6.1.2.1.11
CTR snmpInPkts	1.3.6.1.2.1.11.1	Counter	read-only
CTR snmpOutPkts	1.3.6.1.2.1.11.2	Counter	read-only
CTR snmpInBadVersions	1.3.6.1.2.1.11.3	Counter	read-only
CTR snmpInBadCommunityNames	1.3.6.1.2.1.11.4	Counter	read-only
CTR snmpInBadCommunityUses	1.3.6.1.2.1.11.5	Counter	read-only
CTR snmpInASNParseErrs	1.3.6.1.2.1.11.6	Counter	read-only
CTR snmpInTooBigs	1.3.6.1.2.1.11.8	Counter	read-only
CTR snmpInNoSuchNames	1.3.6.1.2.1.11.9	Counter	read-only
CTR snmpInBadValues	1.3.6.1.2.1.11.10	Counter	read-only
CTR snmpInReadOnlys	1.3.6.1.2.1.11.11	Counter	read-only
CTR snmpInGenErrs	1.3.6.1.2.1.11.12	Counter	read-only
CTR snmpInTotalReqVars	1.3.6.1.2.1.11.13	Counter	read-only
CTR snmpInTotalSetVars	1.3.6.1.2.1.11.14	Counter	read-only
CTR snmpInGetRequests	1.3.6.1.2.1.11.15	Counter	read-only
CTR snmpInGetNexts	1.3.6.1.2.1.11.16	Counter	read-only
CTR snmpInSetRequests	1.3.6.1.2.1.11.17	Counter	read-only
CTR snmpInGetResponses	1.3.6.1.2.1.11.18	Counter	read-only
CTR snmpInTraps	1.3.6.1.2.1.11.19	Counter	read-only
CTR snmpOutTooBigs	1.3.6.1.2.1.11.20	Counter	read-only
CTR snmpOutNoSuchNames	1.3.6.1.2.1.11.21	Counter	read-only
CTR snmpOutBadValues	1.3.6.1.2.1.11.22	Counter	read-only
CTR snmpOutGenErrs	1.3.6.1.2.1.11.24	Counter	read-only
CTR snmpOutGetRequests	1.3.6.1.2.1.11.25	Counter	read-only
CTR snmpOutGetNexts	1.3.6.1.2.1.11.26	Counter	read-only
CTR snmpOutSetRequests	1.3.6.1.2.1.11.27	Counter	read-only
CTR snmpOutGetResponses	1.3.6.1.2.1.11.28	Counter	read-only
CTR snmpOutTraps	1.3.6.1.2.1.11.29	Counter	read-only
INT snmpEnableAuthenTraps	1.3.6.1.2.1.11.30	INTEGER	read-write
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
netcor	1.3.6.1.4.1.329
nc007	1.3.6.1.4.1.329.1
INT netcorResetBox	1.3.6.1.4.1.329.1.1	INTEGER	read-write
INT netcorDsLnkTst	1.3.6.1.4.1.329.1.2	INTEGER	read-write
INT netcorEnLnkTst	1.3.6.1.4.1.329.1.3	INTEGER	read-write
INT netcorLnkTstStat	1.3.6.1.4.1.329.1.4	INTEGER	read-only
INT netcorDsAutRxPolRev	1.3.6.1.4.1.329.1.5	INTEGER	read-write
INT netcorEnAutRxPolRev	1.3.6.1.4.1.329.1.6	INTEGER	read-write
INT netcorPolarityStat	1.3.6.1.4.1.329.1.7	INTEGER	read-only
INT netcorAltRecntAlg	1.3.6.1.4.1.329.1.8	INTEGER	read-write
INT netcorPartitionStat	1.3.6.1.4.1.329.1.9	INTEGER	read-only
INT netcorPortDisable	1.3.6.1.4.1.329.1.10	INTEGER	read-write
INT netcorPortEnable	1.3.6.1.4.1.329.1.11	INTEGER	read-write

RFC description

Legacy MIB for NetCor networking devices providing basic system and network protocol statistics.

Start monitoring NetCor network correlation/management platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETCOR-MIB

What Is NETCOR-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description