All MIBs › NETCOR-MIB › netcorDsAutRxPolRev
netcorDsAutRxPolRev
Module: NETCOR-MIB
OID (symbolic): NETCOR-MIB::netcorDsAutRxPolRev
OID (numeric): 1.3.6.1.4.1.329.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is netcorDsAutRxPolRev?
Based on its name, this object appears to disable automatic receive-polarity reversal detection on a twisted-pair port of the device. Illustratively, admins would use this on links with cabling issues where automatic polarity correction is causing more harm than good, forcing a fixed polarity instead. An admin diagnosing a port that keeps flipping signal polarity unexpectedly might set netcorDsAutRxPolRev to disable the automatic correction for that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.329.1.5 snmpwalk -v2c -c public <target> NETCOR-MIB::netcorDsAutRxPolRev
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.329.1.5.1 snmpget -v2c -c public <target> NETCOR-MIB::netcorDsAutRxPolRev.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.329.1.5.1 i <value>
Start monitoring NetCor network correlation/management platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETCOR-MIB::netcorDsAutRxPolRev OID value, configure state conditions and alerts, and monitor any NetCor network correlation/management platform from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.329 | netcor | NETCOR-MIB |
| 1.3.6.1.4.1.329.1 | nc007 | NETCOR-MIB |
| 1.3.6.1.4.1.329.1.5 | netcorDsAutRxPolRev | NETCOR-MIB |