NETCOM-MIB

Description: Defines management objects for NetCom network communication and interface hardware components.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

This is an enterprise MIB from Sinetica ("netcom" branch) for environmental monitoring hardware, exposing objects for humidity and temperature sensing on network communication equipment. It defines objects to enable monitoring (netcomEnvHumidityEnableMonitoring, netcomEnvTemperatureEnableMonitoring), read current sensor values (netcomEnvCurrentHumidity, netcomEnvCurrentTemperature), set alarm thresholds (upper/lower bounds for both humidity and temperature), and apply calibration offsets for each sensor. This is a direct hardware-environmental-monitoring MIB: it is used to track the physical operating environment of network equipment—detecting overheating, excessive humidity, or sensor drift—which is critical for equipment installed in unconditioned cabinets, outdoor enclosures, or environmentally sensitive sites. It is a standalone vendor MIB (Sinetica) without an apparent dependency on IETF standard environmental MIBs. It is typically deployed on environmental monitoring probes/sensor units attached to network communication racks or enclosures, especially in outside-plant or harsh-environment deployments. Engineers can download the NETCOM-MIB file directly to load it into their MIB browser.

An admin would poll netcomEnvCurrentTemperature and netcomEnvCurrentHumidity and compare them against netcomEnvTemperatureUpperThreshold/netcomEnvTemperatureLowerThreshold and the equivalent humidity thresholds. A current-temperature reading exceeding the upper threshold would indicate cooling failure or an overheating cabinet, while netcomEnvHumidityCalibrationOffset can be adjusted if the humidity sensor reads consistently biased compared to a reference instrument.

Netcom MIB for managing telecommunications and network communication equipment. Provides monitoring and configuration objects for Netcom network communication systems and devices.