NETCOM-MIB :: netcomEnvHumidityLowerThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETCOM-MIB › netcomEnvHumidityLowerThreshold

netcomEnvHumidityLowerThreshold

Module: NETCOM-MIB

OID (symbolic): NETCOM-MIB::netcomEnvHumidityLowerThreshold

OID (numeric): 1.3.6.1.4.1.3711.7.1.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The Lower humidity threshold in 0.1%

What is netcomEnvHumidityLowerThreshold?

The low humidity threshold, in tenths of a percent, below which the unit raises the netcomLowHumidity trap.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3711.7.1.1.1.1.3
snmpwalk -v2c -c public <target> NETCOM-MIB::netcomEnvHumidityLowerThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3711.7.1.1.1.1.3.1
snmpget -v2c -c public <target> NETCOM-MIB::netcomEnvHumidityLowerThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3711.7.1.1.1.1.3.1 i <value>

Start monitoring Sinetica/Netcom environmental monitoring sensor unit (humidity/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETCOM-MIB::netcomEnvHumidityLowerThreshold OID value, configure state conditions and alerts, and monitor any Sinetica/Netcom environmental monitoring sensor unit (humidity/temperature) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3711sineticaHAWK-I2-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3711.7netcomNETCOM-MIB
1.3.6.1.4.1.3711.7.1netcom1NETCOM-MIB
1.3.6.1.4.1.3711.7.1.1netcomObjectsNETCOM-MIB
1.3.6.1.4.1.3711.7.1.1.1netcomEnvironmentNETCOM-MIB
1.3.6.1.4.1.3711.7.1.1.1.1netcomEnvHumidityNETCOM-MIB
1.3.6.1.4.1.3711.7.1.1.1.1.3netcomEnvHumidityLowerThresholdNETCOM-MIB