DASAN-AUTORESET-MIB

All MIBs › DASAN-AUTORESET-MIB

Category: Network Management

Description: Manages automatic reset scheduling and watchdog configuration on DASAN network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-AUTORESET-MIB?

DASAN-AUTORESET-MIB is a DASAN Networks private MIB that manages automatic reset scheduling and watchdog configuration on DASAN network devices such as switches and access equipment. It exposes configuration/control data covering scheduled or condition-triggered device reboots and watchdog-timer settings, rather than traffic or environmental sensor data. Its relevance to hardware/software status monitoring is indirect but important: it lets operators know when a device is configured to auto-reset (e.g., on a schedule, or if a watchdog condition such as an unresponsive process is detected), which is directly tied to device uptime and software stability. As a device-management module it likely depends on standard system-group concepts (like sysUpTime from the standard SNMPv2-MIB) to make sense of reset history. It is typically deployed on DASAN access/aggregation switches in service-provider or enterprise networks that require unattended remote recovery from software hangs. Engineers can download the DASAN-AUTORESET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-AUTORESET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN network switch/access device

Monitoring Examples

No object names were provided in the source excerpt, so a concrete polling walk cannot be grounded in named identifiers; based on the module description, an administrator would expect objects to configure a reset schedule (e.g., time/interval) and a watchdog enable/timeout setting, then check the device's resulting uptime (sysUpTime) to confirm whether a reset occurred as scheduled or unexpectedly. An unplanned reset detected via a dropped uptime counter would indicate a watchdog-triggered recovery from a software hang.

What Can Be Monitored

auto-reset schedule configuration
watchdog timer enable/timeout
device uptime/reset history

Imported Objects

From DASAN-SWITCH-MIB

dsSwitchSystem

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-SMI

Gauge32
IpAddress
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
dsAutoReset	1.3.6.1.4.1.6296.9.1.1.1.31
dsAutoResetBase	1.3.6.1.4.1.6296.9.1.1.1.31.1
dsAutoResetBaseInfo	1.3.6.1.4.1.6296.9.1.1.1.31.1.1
INT dsAutoResetEnable	1.3.6.1.4.1.6296.9.1.1.1.31.1.1.1	INTEGER	read-only	Indicates whether AutoReset globally is enabled or not.
OCT dsAutoResetForceReboot	1.3.6.1.4.1.6296.9.1.1.1.31.1.1.2	OCTET STRING	read-only	The time when force-reboot will occur, ex) '17:25 15 Mar 2010'
INT dsAutoResetResetCount	1.3.6.1.4.1.6296.9.1.1.1.31.1.1.3	INTEGER	read-only	Reboot count by AutoReset
INT dsAutoResetResetThreshold	1.3.6.1.4.1.6296.9.1.1.1.31.1.1.4	INTEGER	read-only	Reboot threshold for AutoReset
dsAutoResetBaseControl	1.3.6.1.4.1.6296.9.1.1.1.31.1.2
INT dsAutoResetBaseControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.1	INTEGER	read-write	Description.
SLE dsAutoResetBaseControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetBaseControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.3	Gauge32	read-write	Description.
TIK dsAutoResetBaseControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetBaseControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.6	INTEGER	read-write	Indicates whether AutoReset globally is enabled or not.
OCT dsAutoResetControlForceReboot	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.7	OCTET STRING	read-write	The time when force-reboot will occur, ex) '17:25 15 Mar 2010'
INT dsAutoResetControlResetCount	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.8	INTEGER	read-write	Reboot count by AutoReset
INT dsAutoResetControlResetThreshold	1.3.6.1.4.1.6296.9.1.1.1.31.1.2.9	INTEGER	read-write	Reboot threshold for AutoReset
dsAutoResetBaseNotification	1.3.6.1.4.1.6296.9.1.1.1.31.1.3
NTF dsAutoResetEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.1.3.1			setAutoResetEnable
NTF dsAutoResetForceRebootChanged	1.3.6.1.4.1.6296.9.1.1.1.31.1.3.2			setAutoResetForceReboot
NTF dsAutoResetResetThresholdChanged	1.3.6.1.4.1.6296.9.1.1.1.31.1.3.3			setAutoResetResetThreshold
dsAutoResetCpu	1.3.6.1.4.1.6296.9.1.1.1.31.2
dsAutoResetCpuInfo	1.3.6.1.4.1.6296.9.1.1.1.31.2.1
INT dsAutoResetCpuEnable	1.3.6.1.4.1.6296.9.1.1.1.31.2.1.1	INTEGER	read-only	Indicates whether CPU-based AutoReset is enabled or not.
INT dsAutoResetCpuThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.2.1.2	INTEGER	read-only	High threshold for the CPU load.
INT dsAutoResetCpuThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.2.1.3	INTEGER	read-only	Low threshold for the CPU load.
INT dsAutoResetCpuContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.2.1.4	INTEGER	read-only	The time of duration. AutoReset condition is met if CPU load continuously exceeds the threshold during the given time.
OCT dsAutoResetCpuResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.2.1.5	OCTET STRING	read-only	The reboot time due to CPU-based AutoReset. Format : hh:mm
dsAutoResetCpuControl	1.3.6.1.4.1.6296.9.1.1.1.31.2.2
INT dsAutoResetCpuControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.1	INTEGER	read-write	Description.
SLE dsAutoResetCpuControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetCpuControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.3	Gauge32	read-write	Description.
TIK dsAutoResetCpuControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetCpuControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetCpuControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.6	INTEGER	read-write	Indicates whether CPU-based AutoReset is enabled or not.
INT dsAutoResetCpuControlThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.7	INTEGER	read-write	High threshold for the CPU load.
INT dsAutoResetCpuControlThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.8	INTEGER	read-write	Low threshold for the CPU load.
INT dsAutoResetCpuControlContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.9	INTEGER	read-write	The time of duration. AutoReset condition is met if CPU load continuously exceeds the threshold during the given time.
OCT dsAutoResetCpuControlResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.2.2.10	OCTET STRING	read-write	The reboot time due to CPU-based AutoReset. Format : hh:mm
dsAutoResetCpuNotification	1.3.6.1.4.1.6296.9.1.1.1.31.2.3
NTF dsAutoResetCpuEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.2.3.1			setAutoResetCpuEnable
dsAutoResetMemory	1.3.6.1.4.1.6296.9.1.1.1.31.3
dsAutoResetMemoryInfo	1.3.6.1.4.1.6296.9.1.1.1.31.3.1
INT dsAutoResetMemoryEnable	1.3.6.1.4.1.6296.9.1.1.1.31.3.1.1	INTEGER	read-only	Indicates whether Memory-based AutoReset is enabled or not.
INT dsAutoResetMemoryThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.3.1.2	INTEGER	read-only	High threshold for the Memory usage.
INT dsAutoResetMemoryThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.3.1.3	INTEGER	read-only	Low threshold for the Memory usage.
INT dsAutoResetMemoryContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.3.1.4	INTEGER	read-only	The time of duration. AutoReset condition is met if Memory usage continuously exceeds the threshold during the given time.
OCT dsAutoResetMemoryResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.3.1.5	OCTET STRING	read-only	The reboot time due to Memory-based AutoReset. Format : hh:mm
dsAutoResetMemoryControl	1.3.6.1.4.1.6296.9.1.1.1.31.3.2
INT dsAutoResetMemoryControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.1	INTEGER	read-write	Description.
SLE dsAutoResetMemoryControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetMemoryControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.3	Gauge32	read-write	Description.
TIK dsAutoResetMemoryControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetMemoryControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetMemoryControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.6	INTEGER	read-write	Indicates whether Memory-based AutoReset is enabled or not.
INT dsAutoResetMemoryControlThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.7	INTEGER	read-write	High threshold for the Memory usage.
INT dsAutoResetMemoryControlThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.8	INTEGER	read-write	Low threshold for the Memory usage.
INT dsAutoResetMemoryControlContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.9	INTEGER	read-write	The time of duration. AutoReset condition is met if Memory usage continuously exceeds the threshold during the given time.
OCT dsAutoResetMemoryControlResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.3.2.10	OCTET STRING	read-write	The reboot time due to Memory-based AutoReset. Format : hh:mm
dsAutoResetMemoryNotification	1.3.6.1.4.1.6296.9.1.1.1.31.3.3
NTF dsAutoResetMemoryEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.3.3.1			setAutoResetMemoryEnable
dsAutoResetNetwork	1.3.6.1.4.1.6296.9.1.1.1.31.4
dsAutoResetNetworkInfo	1.3.6.1.4.1.6296.9.1.1.1.31.4.1
INT dsAutoResetNetworkEnable	1.3.6.1.4.1.6296.9.1.1.1.31.4.1.1	INTEGER	read-only	Indicates whether Network-based AutoReset is enabled or not.
INT dsAutoResetNetworkInterval	1.3.6.1.4.1.6296.9.1.1.1.31.4.1.2	INTEGER	read-only	The interval between ping request.
INT dsAutoResetNetworkCount	1.3.6.1.4.1.6296.9.1.1.1.31.4.1.3	INTEGER	read-only	The count of ping request AutoReset condition is met if there was no ping reply for the count of continuous ping request.
IP dsAutoResetNetworkTargetIp	1.3.6.1.4.1.6296.9.1.1.1.31.4.1.4	IpAddress	read-only	The ping destination IP address
OCT dsAutoResetNetworkResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.4.1.5	OCTET STRING	read-only	The reboot time due to Memory-based AutoReset. Format : hh:mm
dsAutoResetNetworkControl	1.3.6.1.4.1.6296.9.1.1.1.31.4.2
INT dsAutoResetNetworkControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.1	INTEGER	read-write	Description.
SLE dsAutoResetNetworkControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetNetworkControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.3	Gauge32	read-write	Description.
TIK dsAutoResetNetworkControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetNetworkControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetNetworkControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.6	INTEGER	read-write	Indicates whether Network-based AutoReset is enabled or not.
INT dsAutoResetNetworkControlInterval	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.7	INTEGER	read-write	The interval between ping request.
INT dsAutoResetNetworkControlCount	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.8	INTEGER	read-write	The count of ping request AutoReset condition is met if there was no ping reply for the count of continuous ping request.
IP dsAutoResetNetworkControlTargetIp	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.9	IpAddress	read-write	The ping destination IP address
OCT dsAutoResetNetworkControlResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.4.2.10	OCTET STRING	read-write	The reboot time due to Network-based AutoReset. Format : hh:mm
dsAutoResetNetworkNotification	1.3.6.1.4.1.6296.9.1.1.1.31.4.3
NTF dsAutoResetNetworkEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.4.3.1			setAutoResetNetworkEnable
dsAutoResetProcess	1.3.6.1.4.1.6296.9.1.1.1.31.5
dsAutoResetProcessInfo	1.3.6.1.4.1.6296.9.1.1.1.31.5.1
INT dsAutoResetProcessEnable	1.3.6.1.4.1.6296.9.1.1.1.31.5.1.1	INTEGER	read-only	Indicates whether Process-based AutoReset is enabled or not.
OCT dsAutoResetProcessResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.5.1.2	OCTET STRING	read-only	The reboot time due to Process-based AutoReset. Format : hh:mm
dsAutoResetProcessControl	1.3.6.1.4.1.6296.9.1.1.1.31.5.2
INT dsAutoResetProcessControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.1	INTEGER	read-write	Description.
SLE dsAutoResetProcessControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetProcessControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.3	Gauge32	read-write	Description.
TIK dsAutoResetProcessControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetProcessControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetProcessControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.6	INTEGER	read-write	Indicates whether Process-based AutoReset is enabled or not.
OCT dsAutoResetProcessControlResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.5.2.7	OCTET STRING	read-write	Enables/Disables Y.1731 OAM on a trunk port
dsAutoResetProcessNotification	1.3.6.1.4.1.6296.9.1.1.1.31.5.3
NTF dsAutoResetProcessEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.5.3.1			setAutoResetProcessEnable
dsAutoResetCpuNetwork	1.3.6.1.4.1.6296.9.1.1.1.31.6
dsAutoResetCpuNetworkInfo	1.3.6.1.4.1.6296.9.1.1.1.31.6.1
INT dsAutoResetCpuNetworkEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.1	INTEGER	read-only	Indicates whether CPU&Network-based AutoReset is enabled or not.
OCT dsAutoResetCpuNetworkResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.2	OCTET STRING	read-only	The reboot time due to CPU&Network-based AutoReset. Format : hh:mm
INT dsAutoResetCpuNetworkCpuEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.3	INTEGER	read-only	Indicates whether CPU condition of the CPU&Network-based AutoReset is enabled or not.
INT dsAutoResetCpuNetworkCpuThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.4	INTEGER	read-only	High threshold for the CPU load.
INT dsAutoResetCpuNetworkCpuThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.5	INTEGER	read-only	Low threshold for the CPU load.
INT dsAutoResetCpuNetworkCpuContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.6	INTEGER	read-only	The time of duration. AutoReset condition is met if CPU load continuously exceeds the threshold during the given time.
INT dsAutoResetCpuNetworkNetworkEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.7	INTEGER	read-only	Indicates whether Network condition of the CPU&Network-based AutoReset is enabled or not.
INT dsAutoResetCpuNetworkNetworkInterval	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.8	INTEGER	read-only	The interval between ping request.
INT dsAutoResetCpuNetworkNetworkCount	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.9	INTEGER	read-only	The count of ping request AutoReset condition is met if there was no ping reply for the count of continuous ping request.
IP dsAutoResetCpuNetworkNetworkTargetIp	1.3.6.1.4.1.6296.9.1.1.1.31.6.1.10	IpAddress	read-only	The ping destination IP address
dsAutoResetCpuNetworkControl	1.3.6.1.4.1.6296.9.1.1.1.31.6.2
INT dsAutoResetCpuNetworkControlRequest	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.1	INTEGER	read-write	Description.
SLE dsAutoResetCpuNetworkControlStatus	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.2	SleControlStatusType	read-only	Description.
G32 dsAutoResetCpuNetworkControlTimer	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.3	Gauge32	read-write	Description.
TIK dsAutoResetCpuNetworkControlTimeStamp	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.4	TimeTicks	read-only	Description.
SLE dsAutoResetCpuNetworkControlReqResult	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.5	SleControlRequestResultType	read-only	Description.
INT dsAutoResetCpuNetworkControlEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.6	INTEGER	read-write	Indicates whether CPU&Network-based AutoReset is enabled or not.
OCT dsAutoResetCpuNetworkControlResetTime	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.7	OCTET STRING	read-write	The reboot time due to CPU&Network-based AutoReset. Format : hh:mm
INT dsAutoResetCpuNetworkControlCpuEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.8	INTEGER	read-write	Indicates whether CPU condition of the CPU&Network-based AutoReset is enabled or not.
INT dsAutoResetCpuNetworkControlCpuThresholdHigh	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.9	INTEGER	read-write	High threshold for the CPU load.
INT dsAutoResetCpuNetworkControlCpuThresholdLow	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.10	INTEGER	read-write	Low threshold for the CPU load.
INT dsAutoResetCpuNetworkControlCpuContinueTime	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.11	INTEGER	read-write	The time of duration. AutoReset condition is met if CPU load continuously exceeds the threshold during the given time.
INT dsAutoResetCpuNetworkControlNetworkEnable	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.12	INTEGER	read-write	Indicates whether Network condition of the CPU&Network-based AutoReset is enabled or not.
INT dsAutoResetCpuNetworkControlNetworkInterval	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.13	INTEGER	read-write	The interval between ping request.
INT dsAutoResetCpuNetworkControlNetworkCount	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.14	INTEGER	read-write	The count of ping request AutoReset condition is met if there was no ping reply for the count of continuous ping request.
IP dsAutoResetCpuNetworkControlNetworkTargetIp	1.3.6.1.4.1.6296.9.1.1.1.31.6.2.15	IpAddress	read-write	The ping destination IP address
dsAutoResetCpuNetworkNotification	1.3.6.1.4.1.6296.9.1.1.1.31.6.3
NTF dsAutoResetCpuNetworkEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.6.3.1			setAutoResetCpuNetworkEnable
NTF dsAutoResetCpuNetworkCpuEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.6.3.2			setAutoResetCpuNetworkCpuEnable
NTF dsAutoResetCpuNetworkNetworkEnableChanged	1.3.6.1.4.1.6296.9.1.1.1.31.6.3.3			setAutoResetCpuNetworkNetworkEnable

RFC description

Manages automatic reset functionality and IGMP mode configuration on Dasan network switches.

Start monitoring DASAN network switch/access device (auto-reset/watchdog) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-AUTORESET-MIB

What Is DASAN-AUTORESET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description