All MIBs › MOXA-EDS408A-MIB
Organization: Moxa Inc.
Last Updated: 2016-11-02
Category: Industrial Networking, LAN Management
Description: Manages Moxa EDS-408A industrial Ethernet switch port and system configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MOXA-EDS408A-MIB?
MOXA-EDS408A-MIB is a vendor-specific SNMP module for the Moxa EDS-408A, a compact industrial Ethernet switch used in factory automation and rugged network deployments. It exposes objects grouped under switch management (swMgmt) for port and system configuration alongside a trap group (swTraps) for asynchronous event notifications. Administrators rely on it primarily to monitor device and software status: link/port state changes, redundancy or power events, and other conditions surfaced as traps that indicate the switch's operational health rather than deep performance counters. Being a Moxa proprietary MIB, it typically layers on top of standard IF-MIB and SNMPv2-MIB conventions for interface and system identification. It is deployed in industrial control and automation networks where Moxa switches provide hardened, DIN-rail-mounted Ethernet connectivity. Engineers can download the MOXA-EDS408A-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MOXA-EDS408A-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Moxa EDS-408A industrial Ethernet switch
Monitoring Examples
A network operator would subscribe to the traps defined under swTraps to be alerted the moment a port link goes down or a redundant power input fails on the EDS-408A. The swMgmt subtree provides the configuration and status objects an SNMP manager polls to confirm the switch's current operating parameters after such an event. Because sample objects are limited to these two top-level groups, most granular per-port statistics are inherited from standard interface MIBs rather than defined here.
What Can Be Monitored
- port link status
- switch management configuration state
- system trap/alarm events
- power redundancy status
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| moxa | 1.3.6.1.4.1.8691 | |||
| industrialEthernet | 1.3.6.1.4.1.8691.7 | |||
| eds408a | 1.3.6.1.4.1.8691.7.7 | The MIB module for Moxa EDS-408A series specific information. | ||
| mibNotificationsPrefix | 1.3.6.1.4.1.8691.7.7.0 | |||
| NTF configChangeTrap | 1.3.6.1.4.1.8691.7.7.0.1 | The configuration has been changed. | ||
| NTF power1Trap | 1.3.6.1.4.1.8691.7.7.0.2 | The power on/off changed. | ||
| NTF power2Trap | 1.3.6.1.4.1.8691.7.7.0.3 | The power on/off changed. | ||
| NTF trafficOverloadTrap | 1.3.6.1.4.1.8691.7.7.0.4 | The ethernet port's traffic loading exceeds the pre-defined value. | ||
| NTF redundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.7.0.5 | The redundancy topology has been changed. | ||
| NTF turboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.7.0.6 | The coupling path of Turbo Ring has been changed. | ||
| NTF turboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.7.0.7 | The master of Turbo Ring has been changed. | ||
| NTF lldpChgTrap | 1.3.6.1.4.1.8691.7.7.0.19 | The LLDP table is changing. | ||
| swMgmt | 1.3.6.1.4.1.8691.7.7.1 | |||
| INT numberOfPorts | 1.3.6.1.4.1.8691.7.7.1.1 | INTEGER | read-only | Total Ports. |
| STR switchModel | 1.3.6.1.4.1.8691.7.7.1.2 | DisplayString | read-only | The switch model. |
| STR firmwareVersion | 1.3.6.1.4.1.8691.7.7.1.4 | DisplayString | read-only | The firmware version. |
| INT enableWebConfig | 1.3.6.1.4.1.8691.7.7.1.5 | INTEGER | read-write | This enable the Web. configuration function. |
| INT enableTelnetConsole | 1.3.6.1.4.1.8691.7.7.1.6 | INTEGER | read-write | This enable telnet console. |
| INT lineSwapRecovery | 1.3.6.1.4.1.8691.7.7.1.7 | INTEGER | read-write | This enable line-swap-fast-recovery function. |
| networkSetting | 1.3.6.1.4.1.8691.7.7.1.8 | |||
| IP switchIpAddr | 1.3.6.1.4.1.8691.7.7.1.8.1 | IpAddress | read-only | The IP Address of this switch. |
| IP switchIpMask | 1.3.6.1.4.1.8691.7.7.1.8.2 | IpAddress | read-only | The netmask of this switch. |
| IP defaultGateway | 1.3.6.1.4.1.8691.7.7.1.8.3 | IpAddress | read-only | The default gateway of this switch. |
| INT enableAutoIpConfig | 1.3.6.1.4.1.8691.7.7.1.8.4 | INTEGER | read-write | This enable the automatic IP address configuration function. |
| IP dnsServer1IpAddr | 1.3.6.1.4.1.8691.7.7.1.8.5 | IpAddress | read-write | The first DNS server's IP address |
| STR snmpTrapCommunity | 1.3.6.1.4.1.8691.7.7.1.8.6 | DisplayString | read-write | The SNMP trap community name |
| STR trapServerAddr | 1.3.6.1.4.1.8691.7.7.1.8.7 | DisplayString | read-write | The IP address/Domain name of SNMP trap server |
| IP dnsServer2IpAddr | 1.3.6.1.4.1.8691.7.7.1.8.8 | IpAddress | read-write | The second DNS server's IP address |
| STR snmpReadCommunity | 1.3.6.1.4.1.8691.7.7.1.8.9 | DisplayString | read-write | The SNMP read community name |
| STR snmpTrap2Community | 1.3.6.1.4.1.8691.7.7.1.8.11 | DisplayString | read-write | The Second SNMP trap community name |
| STR trap2ServerAddr | 1.3.6.1.4.1.8691.7.7.1.8.12 | DisplayString | read-write | The IP address/Domain name of Second SNMP trap server |
| INT snmpInformEnable | 1.3.6.1.4.1.8691.7.7.1.8.13 | INTEGER | read-write | This enable the snmpInform function. |
| INT snmpInformRetries | 1.3.6.1.4.1.8691.7.7.1.8.14 | INTEGER | read-write | The snmp inform retry times of SNMP trap server |
| INT snmpInformTimeout | 1.3.6.1.4.1.8691.7.7.1.8.15 | INTEGER | read-write | The snmp inform interval of SNMP trap server |
| INT dhcpRetryPeriods | 1.3.6.1.4.1.8691.7.7.1.8.16 | INTEGER | read-write | The DHCP retry periods. |
| INT dhcpRetryTimes | 1.3.6.1.4.1.8691.7.7.1.8.17 | INTEGER | read-write | The dhcp retry times. |
| portSetting | 1.3.6.1.4.1.8691.7.7.1.9 | |||
| portTable | 1.3.6.1.4.1.8691.7.7.1.9.1 | not-accessible | The port table. | |
| portEntry | 1.3.6.1.4.1.8691.7.7.1.9.1.1 | not-accessible | The port entry. | |
| INT portIndex | 1.3.6.1.4.1.8691.7.7.1.9.1.1.1 | INTEGER | read-only | The port index. |
| STR portDesc | 1.3.6.1.4.1.8691.7.7.1.9.1.1.2 | DisplayString | read-only | The port description |
| INT portEnable | 1.3.6.1.4.1.8691.7.7.1.9.1.1.3 | INTEGER | read-write | This enable the port. |
| INT portSpeed | 1.3.6.1.4.1.8691.7.7.1.9.1.1.4 | INTEGER | read-write | The port speed and duplex. |
| INT portMDI | 1.3.6.1.4.1.8691.7.7.1.9.1.1.5 | INTEGER | read-write | The port MDI/MDIX. |
| INT portFDXFlowCtrl | 1.3.6.1.4.1.8691.7.7.1.9.1.1.6 | INTEGER | read-write | The port FDX Flow Control |
| STR portName | 1.3.6.1.4.1.8691.7.7.1.9.1.1.7 | DisplayString | read-write | The port Name |
| monitor | 1.3.6.1.4.1.8691.7.7.1.10 | |||
| INT power1InputStatus | 1.3.6.1.4.1.8691.7.7.1.10.1 | INTEGER | read-only | The status of the first power input. |
| INT power2InputStatus | 1.3.6.1.4.1.8691.7.7.1.10.2 | INTEGER | read-only | The status of the second power input. |
| monitorPortTable | 1.3.6.1.4.1.8691.7.7.1.10.3 | not-accessible | The port table of monitor function. | |
| monitorPortEntry | 1.3.6.1.4.1.8691.7.7.1.10.3.1 | not-accessible | The port table entry of monitor function. | |
| INT monitorLinkStatus | 1.3.6.1.4.1.8691.7.7.1.10.3.1.2 | INTEGER | read-only | The port link status. |
| INT monitorSpeed | 1.3.6.1.4.1.8691.7.7.1.10.3.1.3 | INTEGER | read-only | The port speed and duplex status. |
| INT monitorAutoMDI | 1.3.6.1.4.1.8691.7.7.1.10.3.1.4 | INTEGER | read-only | The port MDI/MDIX status. |
| INT monitorTraffic | 1.3.6.1.4.1.8691.7.7.1.10.3.1.5 | INTEGER | read-only | The traffic loading percentage of port. |
| INT monitorFDXFlowCtrl | 1.3.6.1.4.1.8691.7.7.1.10.3.1.6 | INTEGER | read-only | The Full-Duplex flow control status |
| INT monitorTxTraffic | 1.3.6.1.4.1.8691.7.7.1.10.3.1.7 | INTEGER | read-only | The TX traffic loading percentage of port. |
| INT monitorRxTraffic | 1.3.6.1.4.1.8691.7.7.1.10.3.1.8 | INTEGER | read-only | The RTX traffic loading percentage of port. |
| emailWarning | 1.3.6.1.4.1.8691.7.7.1.11 | |||
| emailService | 1.3.6.1.4.1.8691.7.7.1.11.1 | |||
| STR emailWarningMailServer | 1.3.6.1.4.1.8691.7.7.1.11.1.1 | DisplayString | read-write | The email server's Ip Address/Domain name of email warning function. |
| STR emailWarningFirstEmailAddr | 1.3.6.1.4.1.8691.7.7.1.11.1.2 | DisplayString | read-write | The first email address of email warning function. |
| STR emailWarningSecondEmailAddr | 1.3.6.1.4.1.8691.7.7.1.11.1.3 | DisplayString | read-write | The second email address of email warning function. |
| STR emailWarningThirdEmailAddr | 1.3.6.1.4.1.8691.7.7.1.11.1.4 | DisplayString | read-write | The third email address of email warning function. |
| STR emailWarningFourthEmailAddr | 1.3.6.1.4.1.8691.7.7.1.11.1.5 | DisplayString | read-write | The fourth email address of email warning function. |
| INT emailWarningSMTPPort | 1.3.6.1.4.1.8691.7.7.1.11.1.6 | INTEGER | read-write | The email server's SMTP port of email warning function. |
| emailWarningEventType | 1.3.6.1.4.1.8691.7.7.1.11.2 | |||
| INT emailWarningEventServerColdStart | 1.3.6.1.4.1.8691.7.7.1.11.2.1 | INTEGER | read-write | The switch cold start event of email warning function. |
| INT emailWarningEventServerWarmStart | 1.3.6.1.4.1.8691.7.7.1.11.2.2 | INTEGER | read-write | The switch warm start event of email warning function. |
| INT emailWarningEventConfigChange | 1.3.6.1.4.1.8691.7.7.1.11.2.3 | INTEGER | read-write | The configuration changed event of email warning function. |
| INT emailWarningEventPowerOn2Off | 1.3.6.1.4.1.8691.7.7.1.11.2.4 | INTEGER | read-write | The power on event of email warning function. |
| INT emailWarningEventPowerOff2On | 1.3.6.1.4.1.8691.7.7.1.11.2.5 | INTEGER | read-write | The power off event of email warning function. |
| INT emailWarningEventAuthFail | 1.3.6.1.4.1.8691.7.7.1.11.2.6 | INTEGER | read-write | The authentication fail event of email warning function. |
| INT emailWarningEventTopologyChanged | 1.3.6.1.4.1.8691.7.7.1.11.2.7 | INTEGER | read-write | The communication redundancy topology changed event of email warning function. |
| emailWarningEventPortTable | 1.3.6.1.4.1.8691.7.7.1.11.3 | not-accessible | The port table of the email warning event. | |
| emailWarningEventPortEntry | 1.3.6.1.4.1.8691.7.7.1.11.3.1 | not-accessible | The port table entry of the email warning event. | |
| INT emailWarningEventPortLinkOn | 1.3.6.1.4.1.8691.7.7.1.11.3.1.2 | INTEGER | read-write | The port link on event of email warning function. |
| INT emailWarningEventPortLinkOff | 1.3.6.1.4.1.8691.7.7.1.11.3.1.3 | INTEGER | read-write | The port link off event of email warning function. |
| INT emailWarningEventPortTrafficOverload | 1.3.6.1.4.1.8691.7.7.1.11.3.1.4 | INTEGER | read-write | The port's traffic overloading event of email warning function. |
| INT emailWarningEventPortRxTrafficThreshold | 1.3.6.1.4.1.8691.7.7.1.11.3.1.5 | INTEGER | read-write | The port's traffic threshold of the overloading event. |
| INT emailWarningEventPortTrafficDuration | 1.3.6.1.4.1.8691.7.7.1.11.3.1.6 | INTEGER | read-write | The port's traffic duration of the overloading event. |
| setDeviceIp | 1.3.6.1.4.1.8691.7.7.1.12 | |||
| setDevIpTable | 1.3.6.1.4.1.8691.7.7.1.12.1 | not-accessible | The set device IP table. | |
| setDevIpEntry | 1.3.6.1.4.1.8691.7.7.1.12.1.1 | not-accessible | The set device IP table entry. | |
| INT setDevIpIndex | 1.3.6.1.4.1.8691.7.7.1.12.1.1.1 | INTEGER | read-only | The set device IP index. |
| STR setDevIpCurrentIpofDevice | 1.3.6.1.4.1.8691.7.7.1.12.1.1.2 | DisplayString | read-only | The current IP address of connected to this port. |
| INT setDevIpPresentBy | 1.3.6.1.4.1.8691.7.7.1.12.1.1.3 | INTEGER | read-only | The protocol used that assigning IP to the device. |
| IP setDevIpDedicatedIp | 1.3.6.1.4.1.8691.7.7.1.12.1.1.4 | IpAddress | read-write | The IP address when assign to the device connected to this port. |
| mirroring | 1.3.6.1.4.1.8691.7.7.1.13 | |||
| INT targetPort | 1.3.6.1.4.1.8691.7.7.1.13.1 | INTEGER | read-write | The mirrored port of mirroring function. |
| INT mirroringPort | 1.3.6.1.4.1.8691.7.7.1.13.2 | INTEGER | read-write | The mirroring port of mirroring function. |
| INT monitorDirection | 1.3.6.1.4.1.8691.7.7.1.13.3 | INTEGER | read-write | The traffic direction of mirroring function. |
| commRedundancy | 1.3.6.1.4.1.8691.7.7.1.16 | |||
| INT protocolOfRedundancySetup | 1.3.6.1.4.1.8691.7.7.1.16.1 | INTEGER | read-write | This set the redundancy protocol of this switch. |
| turboRing | 1.3.6.1.4.1.8691.7.7.1.16.2 | |||
| INT turboRingMaster | 1.3.6.1.4.1.8691.7.7.1.16.2.1 | INTEGER | read-only | Is this a Master or Slave. |
| INT turboRingMasterSetup | 1.3.6.1.4.1.8691.7.7.1.16.2.2 | INTEGER | read-write | Set this to be Master. |
| turboRingPortTable | 1.3.6.1.4.1.8691.7.7.1.16.2.3 | not-accessible | Turbo Ring Port Table. | |
| turboRingPortEntry | 1.3.6.1.4.1.8691.7.7.1.16.2.3.1 | not-accessible | Turbo Ring Port Entry. | |
| INT turboRingPortIndex | 1.3.6.1.4.1.8691.7.7.1.16.2.3.1.1 | INTEGER | read-only | Turbo Ring Port Index. |
| INT turboRingPortStatus | 1.3.6.1.4.1.8691.7.7.1.16.2.3.1.2 | INTEGER | read-only | Turbo Ring Port Status. |
| MAC turboRingPortDesignatedBridge | 1.3.6.1.4.1.8691.7.7.1.16.2.3.1.3 | MacAddress | read-only | The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| INT turboRingPortDesignatedPort | 1.3.6.1.4.1.8691.7.7.1.16.2.3.1.4 | INTEGER | read-only | The Port Number of the port on the Designated Bridge for this port's segment. |
| MAC turboRingDesignatedMaster | 1.3.6.1.4.1.8691.7.7.1.16.2.6 | MacAddress | read-only | The MAC address of the bridge which is the Master of the TURBO RING. |
| INT turboRingRdntPort1 | 1.3.6.1.4.1.8691.7.7.1.16.2.7 | INTEGER | read-write | The port number of 1st Redundant Port on the TURBO RING. |
| INT turboRingRdntPort2 | 1.3.6.1.4.1.8691.7.7.1.16.2.8 | INTEGER | read-write | The port number of 2nd Redundant Port on the TURBO RING. |
| INT turboRingEnableCoupling | 1.3.6.1.4.1.8691.7.7.1.16.2.9 | INTEGER | read-write | This enable the ring coupling function. |
| INT turboRingCouplingPort | 1.3.6.1.4.1.8691.7.7.1.16.2.10 | INTEGER | read-write | The coupling port of ring coupling function. |
| INT turboRingCouplingPortStatus | 1.3.6.1.4.1.8691.7.7.1.16.2.11 | INTEGER | read-only | The coupling port status of ring coupling function. |
| INT turboRingControlPort | 1.3.6.1.4.1.8691.7.7.1.16.2.12 | INTEGER | read-write | The control port of ring coupling function. |
| INT turboRingControlPortStatus | 1.3.6.1.4.1.8691.7.7.1.16.2.13 | INTEGER | read-only | The control port status of ring coupling function. |
| INT turboRingBrokenStatus | 1.3.6.1.4.1.8691.7.7.1.16.2.14 | INTEGER | read-only | Turbo Ring broken display. |
| spanningTree | 1.3.6.1.4.1.8691.7.7.1.16.3 | |||
| INT spanningTreeRoot | 1.3.6.1.4.1.8691.7.7.1.16.3.1 | INTEGER | read-only | The root of spanning tree. |
| INT spanningTreeBridgePriority | 1.3.6.1.4.1.8691.7.7.1.16.3.2 | INTEGER | read-write | The bridge priority of spanning tree protocol. |
| INT spanningTreeHelloTime | 1.3.6.1.4.1.8691.7.7.1.16.3.3 | INTEGER | read-write | The hello time of spanning tree protocol. |
| INT spanningTreeMaxAge | 1.3.6.1.4.1.8691.7.7.1.16.3.4 | INTEGER | read-write | The max. age of spanning tree protocol. |
| INT spanningTreeForwardingDelay | 1.3.6.1.4.1.8691.7.7.1.16.3.5 | INTEGER | read-write | Tje forwarding delay of spanning tree protocol. |
| spanningTreeTable | 1.3.6.1.4.1.8691.7.7.1.16.3.6 | not-accessible | The spanning tree table. | |
| spanningTreeEntry | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1 | not-accessible | The spanning tree port entry. | |
| INT spanningTreeIndex | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.1 | INTEGER | read-only | The index of spanning tree table. |
| INT enableSpanningTree | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.2 | INTEGER | read-write | This enable of spanning tree protocol for this port. |
| INT spanningTreePortPriority | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.3 | INTEGER | read-write | The port priority of spanning tree protocol. |
| INT spanningTreePortCost | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.4 | INTEGER | read-write | The port cost of spanning tree protocol. |
| INT spanningTreePortStatus | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.5 | INTEGER | read-only | The port status of spanning tree protocol. |
| INT spanningTreePortEdge | 1.3.6.1.4.1.8691.7.7.1.16.3.6.1.6 | INTEGER | read-write | This configures the Edge Port property for this port. |
| INT activeProtocolOfRedundancy | 1.3.6.1.4.1.8691.7.7.1.16.4 | INTEGER | read-only | This shows the active redundancy protocol of this switch now. The none(0) status will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree. |
| turboRingV2 | 1.3.6.1.4.1.8691.7.7.1.16.5 | |||
| turboRingV2Ring1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1 | |||
| INT ringIndexRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.1 | INTEGER | read-only | The turboRingV2 Ring Index. |
| INT ringEnableRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.2 | INTEGER | read-write | The turboRingV2 Ring1 enable config. |
| INT masterSetupRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.3 | INTEGER | read-write | Is this a Master or Slave. |
| INT masterStatusRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.4 | INTEGER | read-only | Set this to be Master. |
| MAC designatedMasterRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.5 | MacAddress | read-only | The MAC address of the bridge which is the Master of the turboRingV2. |
| INT rdnt1stPortRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.6 | INTEGER | read-write | The port number of 1st Redundant Port on the turboRingV2. |
| INT rdnt1stPortStatusRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.7 | INTEGER | read-only | The status of 1st Redundant Port on the turboRingV2. |
| INT rdnt2ndPortRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.8 | INTEGER | read-write | The port number of 2nd Redundant Port on the turboRingV2. |
| INT rdnt2ndPortStatusRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.9 | INTEGER | read-only | The status of 2nd Redundant Port on the turboRingV2. |
| INT brokenStatusRing1 | 1.3.6.1.4.1.8691.7.7.1.16.5.1.10 | INTEGER | read-only | turboRingV2 broken display. |
| turboRingV2Ring2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2 | |||
| INT ringIndexRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.1 | INTEGER | read-only | The turboRingV2 Ring Index. |
| INT ringEnableRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.2 | INTEGER | read-write | The turboRingV2 Ring2 enable config. |
| INT masterSetupRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.3 | INTEGER | read-write | Is this a Master or Slave. |
| INT masterStatusRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.4 | INTEGER | read-only | Set this to be Master. |
| MAC designatedMasterRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.5 | MacAddress | read-only | The MAC address of the bridge which is the Master of the turboRingV2. |
| INT rdnt1stPortRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.6 | INTEGER | read-write | The port number of 1st Redundant Port on the turboRingV2. |
| INT rdnt1stPortStatusRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.7 | INTEGER | read-only | The status of 1st Redundant Port on the turboRingV2. |
| INT rdnt2ndPortRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.8 | INTEGER | read-write | The port number of 2nd Redundant Port on the turboRingV2. |
| INT rdnt2ndPortStatusRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.9 | INTEGER | read-only | The status of 2nd Redundant Port on the turboRingV2. |
| INT brokenStatusRing2 | 1.3.6.1.4.1.8691.7.7.1.16.5.2.10 | INTEGER | read-only | turboRingV2 broken display. |
| turboRingV2Coupling | 1.3.6.1.4.1.8691.7.7.1.16.5.3 | |||
| INT couplingEnable | 1.3.6.1.4.1.8691.7.7.1.16.5.3.1 | INTEGER | read-write | Setting the ring coupling enable. |
| INT couplingMode | 1.3.6.1.4.1.8691.7.7.1.16.5.3.2 | INTEGER | read-write | Setting the ring coupling mode. |
| INT coupling1stPort | 1.3.6.1.4.1.8691.7.7.1.16.5.3.3 | INTEGER | read-write | If in 'DUAL HOMING' mode, port name is 'Primary port'; if in 'COUPLING' mode, port name is 'Coupling port' |
| INT coupling1stPortStatus | 1.3.6.1.4.1.8691.7.7.1.16.5.3.4 | INTEGER | read-only | The 1st coupling port status of coupling function. |
| INT coupling2ndPort | 1.3.6.1.4.1.8691.7.7.1.16.5.3.5 | INTEGER | read-write | If in 'DUAL HOMING' mode, port name is 'Backup port'; if in 'COUPLING' mode, port name is no used. |
| INT coupling2ndPortStatus | 1.3.6.1.4.1.8691.7.7.1.16.5.3.6 | INTEGER | read-only | The 2nd coupling port status of coupling function. |
| turboChain | 1.3.6.1.4.1.8691.7.7.1.16.6 | |||
| INT turboChainRole | 1.3.6.1.4.1.8691.7.7.1.16.6.1 | INTEGER | read-write | The Role of TURBO CHAIN. |
| INT turboChainPort1 | 1.3.6.1.4.1.8691.7.7.1.16.6.2 | INTEGER | read-write | The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port. |
| INT turboChainPort2 | 1.3.6.1.4.1.8691.7.7.1.16.6.3 | INTEGER | read-write | The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain |
| INT turboChainPort1Status | 1.3.6.1.4.1.8691.7.7.1.16.6.4 | INTEGER | read-only | Turbo Chain Port Status. |
| INT turboChainPort2Status | 1.3.6.1.4.1.8691.7.7.1.16.6.5 | INTEGER | read-only | Turbo Chain Port Status. |
| MAC turboChainPort1PartnerBridge | 1.3.6.1.4.1.8691.7.7.1.16.6.6 | MacAddress | read-only | The MAC address of the next bridge |
| MAC turboChainPort2PartnerBridge | 1.3.6.1.4.1.8691.7.7.1.16.6.7 | MacAddress | read-only | The MAC address of the neighbor Turbo Chain switch |
| relayWarning | 1.3.6.1.4.1.8691.7.7.1.17 | |||
| relayWarningTable | 1.3.6.1.4.1.8691.7.7.1.17.11 | not-accessible | The relay warning table. | |
| relayWarningEntry | 1.3.6.1.4.1.8691.7.7.1.17.11.1 | not-accessible | Relay Warning Entry. | |
| INT relayAlarmIndex | 1.3.6.1.4.1.8691.7.7.1.17.11.1.1 | INTEGER | read-only | The Relay alarm index. |
| INT relayWarningRelayContact | 1.3.6.1.4.1.8691.7.7.1.17.11.1.2 | INTEGER | read-only | The first Relay contact status. |
| INT overrideRelayWarningSetting | 1.3.6.1.4.1.8691.7.7.1.17.11.1.3 | INTEGER | read-write | Override the relay warning setting. |
| INT relayWarningPower1Off | 1.3.6.1.4.1.8691.7.7.1.17.11.1.4 | INTEGER | read-write | The relay contact will be opened while the first power input off. |
| INT relayWarningPower1OffStatus | 1.3.6.1.4.1.8691.7.7.1.17.11.1.5 | INTEGER | read-only | The relay contact is opened as the first power input off.. |
| INT relayWarningPower2Off | 1.3.6.1.4.1.8691.7.7.1.17.11.1.6 | INTEGER | read-write | The relay contact will be opened while the second power input off. |
| INT relayWarningPower2OffStatus | 1.3.6.1.4.1.8691.7.7.1.17.11.1.7 | INTEGER | read-only | The relay contact is opened as the second power input off. |
| INT relayWarningTurboRingBreak | 1.3.6.1.4.1.8691.7.7.1.17.11.1.8 | INTEGER | read-write | The relay contact will be opened while turbo ring break. |
| INT relayWarningTurboRingBreakStatus | 1.3.6.1.4.1.8691.7.7.1.17.11.1.9 | INTEGER | read-only | The relay contact is opened while turbo ring is broken. |
| portRelayWarningTable | 1.3.6.1.4.1.8691.7.7.1.17.12 | not-accessible | The relay warning port table. | |
| portRelayWarningEntry | 1.3.6.1.4.1.8691.7.7.1.17.12.1 | not-accessible | Port Relay Warning Entry. | |
| INT relayWarningLinkChanged | 1.3.6.1.4.1.8691.7.7.1.17.12.1.1 | INTEGER | read-write | The relay contact will be opened while this port's link status is changed. |
| INT relayWarningLinkChangedStatus | 1.3.6.1.4.1.8691.7.7.1.17.12.1.2 | INTEGER | read-only | The relay contact is opened as this port's link status is changed. |
| INT relayWarningTrafficOverload | 1.3.6.1.4.1.8691.7.7.1.17.12.1.3 | INTEGER | read-write | The relay contact will be opened while this port's traffic is overload. |
| INT relayWarningTrafficOverloadStatus | 1.3.6.1.4.1.8691.7.7.1.17.12.1.4 | INTEGER | read-only | The relay contact is opened as this port's traffic is overload. |
| INT relayWarningRxTrafficThreshold | 1.3.6.1.4.1.8691.7.7.1.17.12.1.5 | INTEGER | read-write | The threshold of the port traffic will be over loading. |
| INT relayWarningTrafficDuration | 1.3.6.1.4.1.8691.7.7.1.17.12.1.6 | INTEGER | read-write | The duration of the port traffic will be over loading. |
| trafficPrioritization | 1.3.6.1.4.1.8691.7.7.1.18 | |||
| qosClassification | 1.3.6.1.4.1.8691.7.7.1.18.1 | |||
| INT queuingMechanism | 1.3.6.1.4.1.8691.7.7.1.18.1.1 | INTEGER | read-write | The queuing mechanism. |
| qosPortTable | 1.3.6.1.4.1.8691.7.7.1.18.1.2 | not-accessible | The QOS port table. | |
| qosPortEntry | 1.3.6.1.4.1.8691.7.7.1.18.1.2.1 | not-accessible | The QOS Port Entry. | |
| INT inspectTos | 1.3.6.1.4.1.8691.7.7.1.18.1.2.1.1 | INTEGER | read-write | This enable the inspection of TOS field. |
| INT inspectCos | 1.3.6.1.4.1.8691.7.7.1.18.1.2.1.2 | INTEGER | read-write | This enable the inspection of COS field. |
| INT portPriority | 1.3.6.1.4.1.8691.7.7.1.18.1.2.1.3 | INTEGER | read-write | The default priority of the port. |
| cosMapping | 1.3.6.1.4.1.8691.7.7.1.18.2 | |||
| cosMappingTable | 1.3.6.1.4.1.8691.7.7.1.18.2.1 | not-accessible | The COS mapping table. | |
| cosMappingEntry | 1.3.6.1.4.1.8691.7.7.1.18.2.1.1 | not-accessible | The COS mapping Entry. | |
| INT cosTag | 1.3.6.1.4.1.8691.7.7.1.18.2.1.1.1 | INTEGER | read-only | The cos tag of TOS field. |
| INT cosMappedPriority | 1.3.6.1.4.1.8691.7.7.1.18.2.1.1.2 | INTEGER | read-write | The frame's priority corresponding to it's COS tag value. |
| tosMapping | 1.3.6.1.4.1.8691.7.7.1.18.3 | |||
| tosMappingTable | 1.3.6.1.4.1.8691.7.7.1.18.3.1 | not-accessible | The TOS mapping table. | |
| tosMappingEntry | 1.3.6.1.4.1.8691.7.7.1.18.3.1.1 | not-accessible | TOS mapping Entry. | |
| INT tosClass | 1.3.6.1.4.1.8691.7.7.1.18.3.1.1.1 | INTEGER | read-only | The TOS class of TOS field. |
| INT tosMappedPriority | 1.3.6.1.4.1.8691.7.7.1.18.3.1.1.2 | INTEGER | read-write | The frame's priority corresponding to it's TOS class value. |
| vlan | 1.3.6.1.4.1.8691.7.7.1.19 | |||
| vlanPortSettingTable | 1.3.6.1.4.1.8691.7.7.1.19.1 | not-accessible | The vlan setting table of ports. | |
| vlanPortSettingEntry | 1.3.6.1.4.1.8691.7.7.1.19.1.1 | not-accessible | Port Setting Entry of VLAN. | |
| INT portVlanType | 1.3.6.1.4.1.8691.7.7.1.19.1.1.1 | INTEGER | read-write | The vlan type of port. |
| INT portDefaultVid | 1.3.6.1.4.1.8691.7.7.1.19.1.1.2 | INTEGER | read-write | The PVID of port. |
| STR portFixedVid | 1.3.6.1.4.1.8691.7.7.1.19.1.1.3 | DisplayString | read-write | The fixed vids of (trunk) port. |
| STR portForbiddenVid | 1.3.6.1.4.1.8691.7.7.1.19.1.1.4 | DisplayString | read-write | The forbidden vids of (trunk)port. |
| STR portFixedVidUntag | 1.3.6.1.4.1.8691.7.7.1.19.1.1.5 | DisplayString | read-write | The fixed untag vids of (trunk) port. |
| vlanTable | 1.3.6.1.4.1.8691.7.7.1.19.2 | not-accessible | The VLAN table. | |
| vlanEntry | 1.3.6.1.4.1.8691.7.7.1.19.2.1 | not-accessible | VLAN Entry. | |
| INT vlanId | 1.3.6.1.4.1.8691.7.7.1.19.2.1.1 | INTEGER | read-only | The VLAN id. |
| POR joinedAccessPorts | 1.3.6.1.4.1.8691.7.7.1.19.2.1.2 | PortList | read-only | The access ports that joined this VID. |
| POR joinedTrunkPorts | 1.3.6.1.4.1.8691.7.7.1.19.2.1.3 | PortList | read-only | The trunk ports that joined this VID. |
| POR joinedHybridPorts | 1.3.6.1.4.1.8691.7.7.1.19.2.1.4 | PortList | read-only | The hybrid ports that joined this VID. |
| INT managementVlanId | 1.3.6.1.4.1.8691.7.7.1.19.3 | INTEGER | read-write | The management VLAN id. |
| INT vlanType | 1.3.6.1.4.1.8691.7.7.1.19.4 | INTEGER | read-write | VLAN Type. |
| portbaseVlanSettingTable | 1.3.6.1.4.1.8691.7.7.1.19.5 | not-accessible | Port base Vlan Setting Table. | |
| portbaseVlanSettingEntry | 1.3.6.1.4.1.8691.7.7.1.19.5.1 | not-accessible | Port base Vlan Setting Entry. | |
| INT portbaseVlanSettingIndex | 1.3.6.1.4.1.8691.7.7.1.19.5.1.1 | INTEGER | read-only | port base Vlan Group Index. |
| POR portbaseVlanMemberPorts | 1.3.6.1.4.1.8691.7.7.1.19.5.1.2 | PortList | read-write | port base Vlan Group Member Ports. |
| INT enableGvrp | 1.3.6.1.4.1.8691.7.7.1.19.6 | INTEGER | read-write | Enable GVRP. |
| multicastFiltering | 1.3.6.1.4.1.8691.7.7.1.20 | |||
| igmpSnooping | 1.3.6.1.4.1.8691.7.7.1.20.1 | |||
| INT querierQueryInterval | 1.3.6.1.4.1.8691.7.7.1.20.1.1 | INTEGER | read-write | This query interval of the querier function for this VLAN. |
| igmpSnoopingSettingTable | 1.3.6.1.4.1.8691.7.7.1.20.1.2 | not-accessible | The IGMP snooping setting table. | |
| igmpSnoopingSettingEntry | 1.3.6.1.4.1.8691.7.7.1.20.1.2.1 | not-accessible | The IGMP snooping setting Entry. | |
| INT enableIgmpSnooping | 1.3.6.1.4.1.8691.7.7.1.20.1.2.1.1 | INTEGER | read-write | This enable the IGMP snooping function in this VLAN. |
| INT enableQuerier | 1.3.6.1.4.1.8691.7.7.1.20.1.2.1.2 | INTEGER | read-write | This enable the querier function for this VLAN. |
| POR fixedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.7.1.20.1.2.1.3 | PortList | read-write | The ports that multicast-Querier exist. |
| POR learnedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.7.1.20.1.2.1.4 | PortList | read-only | The ports that multicast-Querier exist. |
| INT enableGlobalIgmpSnooping | 1.3.6.1.4.1.8691.7.7.1.20.1.4 | INTEGER | read-write | This enable the IGMP snooping function. |
| staticMulticast | 1.3.6.1.4.1.8691.7.7.1.20.2 | |||
| staticMulticastTable | 1.3.6.1.4.1.8691.7.7.1.20.2.1 | not-accessible | The static multicast table. | |
| staticMulticastEntry | 1.3.6.1.4.1.8691.7.7.1.20.2.1.1 | not-accessible | Static multicast Entry. | |
| MAC staticMulticastAddress | 1.3.6.1.4.1.8691.7.7.1.20.2.1.1.1 | MacAddress | read-create | The static multicast address. |
| POR staticMulticastPorts | 1.3.6.1.4.1.8691.7.7.1.20.2.1.1.2 | PortList | read-create | The port map of the static multicast address. |
| INT staticMulticastStatus | 1.3.6.1.4.1.8691.7.7.1.20.2.1.1.3 | INTEGER | read-create | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row. |
| gmrp | 1.3.6.1.4.1.8691.7.7.1.20.3 | |||
| gmrpSettingTable | 1.3.6.1.4.1.8691.7.7.1.20.3.1 | not-accessible | The GMRP setting table. | |
| gmrpSettingEntry | 1.3.6.1.4.1.8691.7.7.1.20.3.1.1 | not-accessible | The GMRP Setting Entry. | |
| INT enableGMRP | 1.3.6.1.4.1.8691.7.7.1.20.3.1.1.1 | INTEGER | read-write | Enable/Disable GMRP. |
| gmrpTable | 1.3.6.1.4.1.8691.7.7.1.20.3.2 | not-accessible | The GMRP status table. | |
| gmrpEntry | 1.3.6.1.4.1.8691.7.7.1.20.3.2.1 | not-accessible | The GMRP Status Entry. | |
| MAC gmrpMulticastGroup | 1.3.6.1.4.1.8691.7.7.1.20.3.2.1.1 | MacAddress | read-only | GMRP multicast group. |
| POR gmrpFixedPorts | 1.3.6.1.4.1.8691.7.7.1.20.3.2.1.2 | PortList | read-only | The ports that joined GMRP multicast group manually. |
| POR gmrpLearnedPorts | 1.3.6.1.4.1.8691.7.7.1.20.3.2.1.3 | PortList | read-only | The ports that joined GMRP multicast group by GMRP learning. |
| rateLimiting | 1.3.6.1.4.1.8691.7.7.1.21 | |||
| normalModeRateLimitingIngressTable | 1.3.6.1.4.1.8691.7.7.1.21.1 | not-accessible | The rate limiting table. | |
| normalModeRateLimitingIngressEntry | 1.3.6.1.4.1.8691.7.7.1.21.1.1 | not-accessible | Rate limiting Entry. | |
| INT limitMode | 1.3.6.1.4.1.8691.7.7.1.21.1.1.1 | INTEGER | read-write | The limit mode. |
| INT lowPriLimitRate | 1.3.6.1.4.1.8691.7.7.1.21.1.1.2 | INTEGER | read-write | The limiting rate of low priority queue. |
| INT normalPriLimitRate | 1.3.6.1.4.1.8691.7.7.1.21.1.1.3 | INTEGER | read-write | The limiting rate of normal priority queue. The values being equal to or double value of lowPriLimitRate are valid for set. |
| INT mediumPriLimitRate | 1.3.6.1.4.1.8691.7.7.1.21.1.1.4 | INTEGER | read-write | The limiting rate of medium priority queue. The values being equal to or double value of normalPriLimitRate are valid for set. |
| INT highPriLimitRate | 1.3.6.1.4.1.8691.7.7.1.21.1.1.5 | INTEGER | read-write | The limiting rate of high priority queue. The values being equal to or double value of mediumPriLimitRate are valid for set. |
| INT egressLimit | 1.3.6.1.4.1.8691.7.7.1.21.1.1.6 | INTEGER | read-write | The ingress limit mode. |
| portDisableMode | 1.3.6.1.4.1.8691.7.7.1.21.3 | |||
| INT portDisableModePeriod | 1.3.6.1.4.1.8691.7.7.1.21.3.1 | INTEGER | read-write | Check time. |
| portDisableModeTable | 1.3.6.1.4.1.8691.7.7.1.21.3.2 | not-accessible | The rate limiting table. | |
| portDisableModeEntry | 1.3.6.1.4.1.8691.7.7.1.21.3.2.1 | not-accessible | Rate limiting Entry. | |
| INT ingressLimit | 1.3.6.1.4.1.8691.7.7.1.21.3.2.1.1 | INTEGER | read-write | The ingress limit mode. |
| INT rateLimitingMode | 1.3.6.1.4.1.8691.7.7.1.21.4 | INTEGER | read-write | The rate limiting mode. |
| accessibleIP | 1.3.6.1.4.1.8691.7.7.1.30 | |||
| INT enableAccessibleIP | 1.3.6.1.4.1.8691.7.7.1.30.1 | INTEGER | read-write | Enable the accessible IP address list. |
| accessibleIpTable | 1.3.6.1.4.1.8691.7.7.1.30.2 | not-accessible | accessibleIP. | |
| accessibleIpEntry | 1.3.6.1.4.1.8691.7.7.1.30.2.1 | not-accessible | Accessible IP address entry. | |
| IP accessibleIpAddress | 1.3.6.1.4.1.8691.7.7.1.30.2.1.1 | IpAddress | read-create | Accessible IP address |
| IP accessibleIpNetMask | 1.3.6.1.4.1.8691.7.7.1.30.2.1.2 | IpAddress | read-create | Accessible IP netmask. |
| INT accessibleIpStatus | 1.3.6.1.4.1.8691.7.7.1.30.2.1.3 | INTEGER | read-create | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row. |
| sysFileUpdate | 1.3.6.1.4.1.8691.7.7.1.31 | |||
| STR tftpServer | 1.3.6.1.4.1.8691.7.7.1.31.1 | DisplayString | read-write | The TFTP Server name(IP Address) |
| STR firmwarePathName | 1.3.6.1.4.1.8691.7.7.1.31.2 | DisplayString | read-write | The path name of firmware file in the TFTP Server |
| STR logPathName | 1.3.6.1.4.1.8691.7.7.1.31.3 | DisplayString | read-write | The path name of log file in the TFTP Server |
| STR confPathName | 1.3.6.1.4.1.8691.7.7.1.31.4 | DisplayString | read-write | The path name of configuration file in the TFTP Server |
| INT tftpUpdate | 1.3.6.1.4.1.8691.7.7.1.31.5 | INTEGER | read-create | |
| timeSetting | 1.3.6.1.4.1.8691.7.7.1.32 | |||
| DAT sysDateTime | 1.3.6.1.4.1.8691.7.7.1.32.1 | DateAndTime | read-write | The date time of system |
| INT calibratePeriod | 1.3.6.1.4.1.8691.7.7.1.32.2 | INTEGER | read-write | The period (seconds) that calibrate with time server |
| STR timeServer1 | 1.3.6.1.4.1.8691.7.7.1.32.3 | DisplayString | read-write | The first time server |
| STR timeServer2 | 1.3.6.1.4.1.8691.7.7.1.32.4 | DisplayString | read-write | The second time server |
| daylightSaving | 1.3.6.1.4.1.8691.7.7.1.32.5 | |||
| INT startMonth | 1.3.6.1.4.1.8691.7.7.1.32.5.1 | INTEGER | read-write | Setting Start Month of Daylight Saving time |
| INT startWeek | 1.3.6.1.4.1.8691.7.7.1.32.5.2 | INTEGER | read-write | Setting Start Week of Daylight Saving time |
| INT startDay | 1.3.6.1.4.1.8691.7.7.1.32.5.3 | INTEGER | read-write | Setting Start Day of Daylight Saving time |
| INT startHour | 1.3.6.1.4.1.8691.7.7.1.32.5.4 | INTEGER | read-write | Setting Start Hour of Daylight Saving time |
| INT endMonth | 1.3.6.1.4.1.8691.7.7.1.32.5.5 | INTEGER | read-write | Setting End Month of Daylight Saving time |
| INT endWeek | 1.3.6.1.4.1.8691.7.7.1.32.5.6 | INTEGER | read-write | Setting End Week of Daylight Saving time |
| INT endDay | 1.3.6.1.4.1.8691.7.7.1.32.5.7 | INTEGER | read-write | Setting End Day of Daylight Saving time |
| INT endHour | 1.3.6.1.4.1.8691.7.7.1.32.5.8 | INTEGER | read-write | Setting End Hour of Daylight Saving time |
| INT offsetHours | 1.3.6.1.4.1.8691.7.7.1.32.5.9 | INTEGER | read-write | Setting Offset Hours of Daylight Saving time |
| INT enableNTPServer | 1.3.6.1.4.1.8691.7.7.1.32.6 | INTEGER | read-write | This enable NTP Server. |
| INT timeProtocolOption | 1.3.6.1.4.1.8691.7.7.1.32.7 | INTEGER | read-write | Time Protocol. |
| dipSwitchSetting | 1.3.6.1.4.1.8691.7.7.1.34 | |||
| INT dipSwitchEnableTurboRing | 1.3.6.1.4.1.8691.7.7.1.34.1 | INTEGER | read-write | Enable TurboRing Dip Switch functions |
| INT dipSwitchTurboRingPole | 1.3.6.1.4.1.8691.7.7.1.34.2 | INTEGER | read-only | The TurboRing Pole status of Dip switch. |
| INT dipSwitchRingCouplingPole | 1.3.6.1.4.1.8691.7.7.1.34.3 | INTEGER | read-only | The Ring Coupling Pole status of Dip switch. |
| INT dipSwitchRingMasterPole | 1.3.6.1.4.1.8691.7.7.1.34.4 | INTEGER | read-only | The Ring Master Pole status of Dip switch. |
| backupMediaSetting | 1.3.6.1.4.1.8691.7.7.1.35 | |||
| INT backupMediaAutoLoad | 1.3.6.1.4.1.8691.7.7.1.35.1 | INTEGER | read-write | Enable Abc-01 backupMedia configuration PowerOn Auto Load functions |
| INT enableWarmStart | 1.3.6.1.4.1.8691.7.7.1.36 | INTEGER | read-write | Enable to restart MOXA ethernet switch. |
| syslogSetting | 1.3.6.1.4.1.8691.7.7.1.37 | |||
| STR syslogServer1 | 1.3.6.1.4.1.8691.7.7.1.37.1 | DisplayString | read-write | The syslog server 1 |
| INT syslogServer1port | 1.3.6.1.4.1.8691.7.7.1.37.2 | INTEGER | read-write | The syslog server 1 port |
| STR syslogServer2 | 1.3.6.1.4.1.8691.7.7.1.37.3 | DisplayString | read-write | The syslog server 2 |
| INT syslogServer2port | 1.3.6.1.4.1.8691.7.7.1.37.4 | INTEGER | read-write | The syslog server 2 port |
| STR syslogServer3 | 1.3.6.1.4.1.8691.7.7.1.37.5 | DisplayString | read-write | The syslog server 3 |
| INT syslogServer3port | 1.3.6.1.4.1.8691.7.7.1.37.6 | INTEGER | read-write | The syslog server 3 port |
| dhcpRelayAgentSetting | 1.3.6.1.4.1.8691.7.7.1.39 | |||
| STR dhcpServer1 | 1.3.6.1.4.1.8691.7.7.1.39.1 | DisplayString | read-write | The dhcp Relay Agent Server 1. |
| STR dhcpServer2 | 1.3.6.1.4.1.8691.7.7.1.39.2 | DisplayString | read-write | The dhcp Relay Agent Server 2. |
| STR dhcpServer3 | 1.3.6.1.4.1.8691.7.7.1.39.3 | DisplayString | read-write | The dhcp Relay Agent Server 3. |
| STR dhcpServer4 | 1.3.6.1.4.1.8691.7.7.1.39.4 | DisplayString | read-write | The dhcp Relay Agent Server 4. |
| option82Setting | 1.3.6.1.4.1.8691.7.7.1.39.5 | |||
| INT enableOption82 | 1.3.6.1.4.1.8691.7.7.1.39.5.1 | INTEGER | read-write | Enable DHCP Option 82 |
| INT option82Type | 1.3.6.1.4.1.8691.7.7.1.39.5.2 | INTEGER | read-write | Option 82 Type selector |
| STR option82Value | 1.3.6.1.4.1.8691.7.7.1.39.5.3 | DisplayString | read-write | Option 82 Type Value |
| STR option82ValueDisplay | 1.3.6.1.4.1.8691.7.7.1.39.5.4 | DisplayString | read-only | Option 82 Type Value Display |
| dhcpFunctionTable | 1.3.6.1.4.1.8691.7.7.1.39.6 | not-accessible | DHCP Function Table. | |
| dhcpFunctionTableEntry | 1.3.6.1.4.1.8691.7.7.1.39.6.1 | not-accessible | DHCP Function Table Entry. | |
| INT dhcpPortIndex | 1.3.6.1.4.1.8691.7.7.1.39.6.1.1 | INTEGER | read-only | The DHCP Port Index. |
| STR circuitID | 1.3.6.1.4.1.8691.7.7.1.39.6.1.2 | DisplayString | read-only | The Circuit ID. |
| INT option82Enable | 1.3.6.1.4.1.8691.7.7.1.39.6.1.3 | INTEGER | read-write | This enable option 82 of the port. |
| diagnosis | 1.3.6.1.4.1.8691.7.7.1.42 | |||
| lldpSetting | 1.3.6.1.4.1.8691.7.7.1.42.1 | |||
| INT enableLLDP | 1.3.6.1.4.1.8691.7.7.1.42.1.1 | INTEGER | read-write | This enable the LLDP function. |
| INT lldpMSGInterval | 1.3.6.1.4.1.8691.7.7.1.42.1.2 | INTEGER | read-write | The LLDP message transmit interval. |
| INT webTimeout | 1.3.6.1.4.1.8691.7.7.1.43 | INTEGER | read-write | Web Timeout |
| INT ageTime | 1.3.6.1.4.1.8691.7.7.1.44 | INTEGER | read-write | Web Timeout |
| garpSetting | 1.3.6.1.4.1.8691.7.7.1.45 | |||
| INT joinTime | 1.3.6.1.4.1.8691.7.7.1.45.1 | INTEGER | read-write | Join Time (ms). |
| INT leaveTime | 1.3.6.1.4.1.8691.7.7.1.45.2 | INTEGER | read-write | Leave Time (ms). |
| INT leaveAllTime | 1.3.6.1.4.1.8691.7.7.1.45.3 | INTEGER | read-write | Leaveall Time (ms). |
| eventlog | 1.3.6.1.4.1.8691.7.7.1.46 | |||
| eventlogTable | 1.3.6.1.4.1.8691.7.7.1.46.1 | not-accessible | The table of eventlog. | |
| eventlogEntry | 1.3.6.1.4.1.8691.7.7.1.46.1.1 | not-accessible | The table entry of eventlog. | |
| INT eventlogIndex | 1.3.6.1.4.1.8691.7.7.1.46.1.1.1 | INTEGER | read-only | The index of eventlog entry. |
| INT eventlogBootup | 1.3.6.1.4.1.8691.7.7.1.46.1.1.2 | INTEGER | read-only | The reboot count of the system. |
| STR eventlogDate | 1.3.6.1.4.1.8691.7.7.1.46.1.1.3 | DisplayString | read-only | The date of the event occurred. |
| STR eventlogTime | 1.3.6.1.4.1.8691.7.7.1.46.1.1.4 | DisplayString | read-only | The time of the event occurred. |
| STR eventlogUptime | 1.3.6.1.4.1.8691.7.7.1.46.1.1.5 | DisplayString | read-only | The time of the event occurred after booting up. |
| STR eventlogEvent | 1.3.6.1.4.1.8691.7.7.1.46.1.1.6 | DisplayString | read-only | The event which occurred in the system. |
| INT eventlogClear | 1.3.6.1.4.1.8691.7.7.1.46.2 | INTEGER | read-write | To clear the eventlog, set value 1 to this field. |
| industrialProtocol | 1.3.6.1.4.1.8691.7.7.1.47 | |||
| eipSetting | 1.3.6.1.4.1.8691.7.7.1.47.1 | |||
| INT enableEtherNetIP | 1.3.6.1.4.1.8691.7.7.1.47.1.1 | INTEGER | read-write | This enable the EtherNet/IP function. |
| modbusTCPSetting | 1.3.6.1.4.1.8691.7.7.1.47.2 | |||
| INT enableModbusTCP | 1.3.6.1.4.1.8691.7.7.1.47.2.1 | INTEGER | read-write | This enable the Modbus TCP function. |
| INT enableFactoryDefault | 1.3.6.1.4.1.8691.7.7.1.48 | INTEGER | read-write | Reset all EtherDevice switch settings to factory default values |
| INT consoleLoginMode | 1.3.6.1.4.1.8691.7.7.1.51 | INTEGER | read-write | This option can change console login mode. |
| INT cpuLoading5s | 1.3.6.1.4.1.8691.7.7.1.53 | INTEGER | read-only | CPU Loading for the past 5 seconds in %. |
| INT cpuLoading30s | 1.3.6.1.4.1.8691.7.7.1.54 | INTEGER | read-only | CPU Loading for the past 30 seconds in %. |
| INT cpuLoading300s | 1.3.6.1.4.1.8691.7.7.1.55 | INTEGER | read-only | CPU Loading for the past 5 minutes in %. |
| INT totalMemory | 1.3.6.1.4.1.8691.7.7.1.56 | INTEGER | read-only | Total size of System RAM. |
| INT freeMemory | 1.3.6.1.4.1.8691.7.7.1.57 | INTEGER | read-only | Total size of free dynamic memory |
| INT usedMemory | 1.3.6.1.4.1.8691.7.7.1.58 | INTEGER | read-only | Total size of used dynamic memory |
| INT memoryUsage | 1.3.6.1.4.1.8691.7.7.1.59 | INTEGER | read-only | The usage of memory size in %. |
| INT loopProtection | 1.3.6.1.4.1.8691.7.7.1.61 | INTEGER | read-write | This enable the Loop Protection function. |
| swTraps | 1.3.6.1.4.1.8691.7.7.2 | |||
| INT varconfigChangeTrap | 1.3.6.1.4.1.8691.7.7.2.1 | INTEGER | read-only | The configuration has been changed. |
| INT varpower1Trap | 1.3.6.1.4.1.8691.7.7.2.2 | INTEGER | read-only | The power on/off changed. |
| INT varpower2Trap | 1.3.6.1.4.1.8691.7.7.2.3 | INTEGER | read-only | The power on/off changed. |
| INT vartrafficOverloadTrap | 1.3.6.1.4.1.8691.7.7.2.4 | INTEGER | read-only | The ethernet port's traffic loading exceeds the pre-defined value. |
| INT varredundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.7.2.5 | INTEGER | read-only | The redundancy topology has been changed. |
| INT varturboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.7.2.6 | INTEGER | read-only | The coupling path of Turbo Ring has been changed. |
| INT varturboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.7.2.7 | INTEGER | read-only | The master of Turbo Ring has been changed. |
| INT varLLDPChgTrap | 1.3.6.1.4.1.8691.7.7.2.19 | INTEGER | read-only | The LLDP table is changing. |
RFC description
Moxa EtherDevice Switch EDS408A industrial switch MIB with port and VLAN management.
Start monitoring Moxa EDS-408A industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.