GBNL3IPPool-MIB

All MIBs › GBNL3IPPool-MIB

Organization: admin Systems, Inc.

Last Updated: 2001-05-03

Category: IP Routing

Description: Manages IP address pool allocations on GBN Layer 3 network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GBNL3IPPool-MIB?

GBNL3IPPool-MIB is a GBN enterprise MIB for managing IP address pool allocations on GBN Layer 3 network devices, most likely supporting features such as DHCP relay or address pool assignment on the router/switch. It exposes configuration of address pools, such as pool ranges, and their allocation/assignment state to clients or interfaces, rather than physical hardware telemetry. Its monitoring value lies in the software configuration/state of address management: confirming pool utilization, remaining free addresses, and whether a pool is exhausted are the kind of operational checks this MIB would support, which matters for catching an IP pool running out before it causes client provisioning failures. As a vendor private MIB it does not declare dependency on other standard MIBs. It is deployed on GBN Layer 3 switches/routers acting as DHCP or address-pool servers for downstream clients. Network engineers evaluating or troubleshooting this functionality can download the GBNL3IPPool-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GBNL3IPPool-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

GBN Layer 3 switch/router

Monitoring Examples

No object or table names were extracted for this module, so a concrete polling example cannot be grounded in real identifiers; in general use, an administrator would monitor an IP pool table for allocated versus free address counts per pool, where a pool nearing exhaustion signals an imminent client address-assignment failure.

What Can Be Monitored

configured IP address pool ranges
allocated vs. free addresses per pool
pool exhaustion state

Imported Objects

From ADMIN-MASTER-MIB

gbnL3

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
gbnL3IPPoolMib	1.3.6.1.4.1.13464.1.2.5.6			GBN Enterprise MIB definition.
ipPool	1.3.6.1.4.1.13464.1.2.5.6.1
ipPoolTable	1.3.6.1.4.1.13464.1.2.5.6.1.1		not-accessible	A table of Ip Pool.
ipPoolEntry	1.3.6.1.4.1.13464.1.2.5.6.1.1.1		not-accessible	Table entry of Ip Pool.
INT ipPoolIndex	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.1	INTEGER	not-accessible	Pool ID
STR ipPoolName	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.2	DisplayString	read-write	Pool Name ; It can be made up of only numbers and English letters, and must begin with a letter.
IP ipPoolGatewayIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.3	IpAddress	read-write	Gateway IP Address of the Pool
IP ipPoolSubnetMask	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.4	IpAddress	read-write	SubnetMask of the Pool
IP ipPoolPrimaryDNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.5	IpAddress	read-write	IP Address of Primary DNS Server
IP ipPoolSecondDNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.6	IpAddress	read-write	IP Address of second DNS server
IP ipPoolThirdDNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.7	IpAddress	read-write	IP Address of second DNS server
IP ipPoolFourthDNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.8	IpAddress	read-write	IP Address of second DNS server
IP ipPoolPrimaryNBNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.9	IpAddress	read-write	IP Address of primary NetBios name server
IP ipPoolSecondNBNSIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.10	IpAddress	read-write	IP Address of second NetBios name server
I32 ipPoolLeaseTime	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.11	Integer32	read-write	Lease time of ip pool
STR ipPoolDnsSuffixName	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.12	DisplayString	read-write	Pool Dns suffix Name ;
ROW ipPoolRowStatus	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.13	RowStatus	read-write	Row status
IP ipPoolRouterIp	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.14	IpAddress	read-write	Router IP Address of the Pool
INT ipPoolOption43Format	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.15	INTEGER	read-write	format value of dhcp option 43 of the Pool.need to set this first,then set ipPoolOption43Value
OCT ipPoolOption43Value	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.16	OCTET STRING	read-write	value of dhcp option 43 of the Pool.max length is 64, when length is 0, means delete
STR ipPoolTftpServerName	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.17	DisplayString	read-write	dhcp option 66: tftp-server name
STR ipPoolBootfileName	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.18	DisplayString	read-write	dhcp option 67: bootfile name
IP ipPoolTftpServerIpFirst	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.19	IpAddress	read-write	dhcp option 150: tftp-server first ipaddress
IP ipPoolTftpServerIpSecond	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.20	IpAddress	read-write	dhcp option 150: tftp-server second ipaddress
IP ipPoolTftpServerIpThird	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.21	IpAddress	read-write	dhcp option 150: tftp-server third ipaddress
IP ipPoolTftpServerIpFourth	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.22	IpAddress	read-write	dhcp option 150: tftp-server fourth ipaddress
STR ipPoolFtpServerUser	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.23	DisplayString	read-write	dhcp option 141: FTP/SFTP user name
STR ipPoolFtpServerPassword	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.24	DisplayString	read-write	dhcp option 142: FTP/SFTP user password
IP ipPoolFtpServerIpaddress	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.25	IpAddress	read-write	dhcp option 143: ftp-server ipaddress
STR ipPoolOption145Hostname	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.26	DisplayString	read-write	dhcp option 145: host name
STR ipPoolOption145Hostver	1.3.6.1.4.1.13464.1.2.5.6.1.1.1.27	DisplayString	read-write	dhcp option 145: host version
ipSectionTable	1.3.6.1.4.1.13464.1.2.5.6.1.2		not-accessible	A table of switch interfaces and associated properties.
ipSectionEntry	1.3.6.1.4.1.13464.1.2.5.6.1.2.1		not-accessible	Table entry for switch interface control and status information.
INT ipPoolID	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.1	INTEGER	read-only	Pool ID
INT ipSectionID	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.2	INTEGER	read-only	section ID
IP ipSectionStartIp	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.3	IpAddress	read-write	The start IP Address of a section in the specified pool
IP ipSectionEndIp	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.4	IpAddress	read-write	The end IP Address of a section
I32 ipSectionIpCount	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.5	Integer32	read-only	Number of ip address in this section
ROW ipSectionRowStatus	1.3.6.1.4.1.13464.1.2.5.6.1.2.1.6	RowStatus	read-write	Row status of Entry
ipDisableTable	1.3.6.1.4.1.13464.1.2.5.6.1.3		not-accessible	A table of disabled ip.
ipDisableEntry	1.3.6.1.4.1.13464.1.2.5.6.1.3.1		not-accessible	Table entry of disabled ip .
IP ipDisableAddr	1.3.6.1.4.1.13464.1.2.5.6.1.3.1.1	IpAddress	read-only	Disabled IP Address
INT ipDisablePoolId	1.3.6.1.4.1.13464.1.2.5.6.1.3.1.2	INTEGER	read-only	Pool ID of a disabled IP
INT ipDisableStatus	1.3.6.1.4.1.13464.1.2.5.6.1.3.1.3	INTEGER	read-write	status of Entry

RFC description

Gigabit Networks vendor-private MIB for managing Layer 3 IP address pool allocation and assignment.

Start monitoring Greentech (GBN) managed switch/router (IP address pool management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GBNL3IPPool-MIB

What Is GBNL3IPPool-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description