All MIBs › ME1200-PTP-MIB
Organization: Cisco Systems, Inc
Last Updated: 2015-07-06
Category: NTP
Description: Configures and monitors IEEE 1588 Precision Time Protocol on Cisco ME1200 switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ME1200-PTP-MIB?
ME1200-PTP-MIB is a Cisco private MIB (documented internally as "Private PTP MIB") for configuring and monitoring IEEE 1588 Precision Time Protocol clocks on the Cisco ME 1200 Carrier Ethernet Access Device. It defines configuration tables such as me1200PtpConfigClocksDefaultDsTable (clock type, priority1/priority2, domain number, VLAN tagging, and profile selection among ieee1588/g8265/g8275) and status tables including me1200PtpStatusClocksParentDsTable (grandmaster identity and clock-quality fields), me1200PtpStatusClocksCurrentDsTable, and me1200PtpStatusClocksPortsDsTable (per-port PTP state via ME1200ptpClockPortState values like master/slave/passive/faulty). It also models unicast master/slave negotiation tables and PTP notifications, giving visibility into whether a clock is synchronized, in holdover, or has lost its grandmaster. This is critical for verifying frequency/phase synchronization on mobile backhaul and Carrier Ethernet links where PTP underpins timing-sensitive services. It depends on the switch's underlying clock hardware and VLAN/interface configuration, and is deployed specifically on ME1200 access platforms -- network engineers turn to the ME1200-PTP-MIB MIB Browser view to inspect these clock and port-state objects.
IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-PTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco ME 1200 Carrier Ethernet Access Device
Monitoring Examples
An operator polls me1200PtpStatusClocksPortsDsTable to check that a port's PTP state is master or slave as expected, and reviews me1200PtpStatusClocksParentDsTable for the current grandmaster's clock quality; a port state reporting faulty or a slave clock stuck in holdover (per ME1200ptpSlaveClockState) would indicate a lost or degraded PTP timing reference.
What Can Be Monitored
- PTP clock configuration (priority, domain, profile)
- per-port PTP clock port state (master/slave/passive/faulty)
- parent/grandmaster clock identity and quality
- slave clock synchronization state (freerun/locking/locked/holdover)
- unicast master/slave negotiation tables
- PTP notifications
This MIB depends on
Related MIBs
Imported Objects
From CISCOME1200-MIB
| me1200SwitchMgmt | OBJECT-IDENTITY |
From ME1200-TC
| ME1200Integer16 | |
| ME1200Integer64 | |
| ME1200InterfaceIndex | |
| ME1200RowEditorState | |
| ME1200Unsigned16 | |
| ME1200Unsigned64 | |
| ME1200Unsigned8 |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| me1200PtpMib | 1.3.6.1.4.1.9.9.815.1.65 | Private PTP MIB. | ||
| me1200PtpMibObjects | 1.3.6.1.4.1.9.9.815.1.65.1 | |||
| me1200PtpCapabilities | 1.3.6.1.4.1.9.9.815.1.65.1.1 | |||
| me1200PtpCapabilitiesGlobals | 1.3.6.1.4.1.9.9.815.1.65.1.1.1 | |||
| U32 me1200PtpCapabilitiesGlobalsClockCount | 1.3.6.1.4.1.9.9.815.1.65.1.1.1.1 | Unsigned32 | read-only | The number of PTP clocks supported by the device. |
| me1200PtpConfig | 1.3.6.1.4.1.9.9.815.1.65.1.2 | |||
| me1200PtpConfigGlobals | 1.3.6.1.4.1.9.9.815.1.65.1.2.1 | |||
| me1200PtpConfigGlobalsExternalClockMode | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.1 | |||
| ME1 me1200PtpConfigGlobalsExternalClockModeOnePpsMode | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.1.1 | ME1200ptpExtClock1pps | read-write | The mode of the PPS pin. |
| T/F me1200PtpConfigGlobalsExternalClockModeExternalEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.1.2 | TruthValue | read-write | External enable of PPS output. |
| ME1 me1200PtpConfigGlobalsExternalClockModeAdjustMethod | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.1.3 | ME1200ptpPreferredAdj | read-write | The adjustment method of the PPS external output. 0: LTC Frequency 1: SyncE DPLL 2: Oscillator 3: LTC Phase |
| U32 me1200PtpConfigGlobalsExternalClockModeClockFrequency | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.1.4 | Unsigned32 | read-write | The frequency in hertz (Hz) of the PPS external output. |
| me1200PtpConfigGlobalsSystemTimeSyncMode | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.2 | |||
| ME1 me1200PtpConfigGlobalsSystemTimeSyncModeMode | 1.3.6.1.4.1.9.9.815.1.65.1.2.1.2.1 | ME1200ptpSystemTimeSyncMode | read-write | Mode of the System time ptp time synchronization. |
| me1200PtpConfigClocks | 1.3.6.1.4.1.9.9.815.1.65.1.2.2 | |||
| me1200PtpConfigClocksDefaultDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1 | not-accessible | This is the configurable part of the PTP clocks DefaultDS. | |
| me1200PtpConfigClocksDefaultDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksDefaultDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.1 | Integer32 | not-accessible | - |
| ME1 me1200PtpConfigClocksDefaultDsDeviceType | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.2 | ME1200ptpDeviceType | read-write | The PTP clock type. |
| T/F me1200PtpConfigClocksDefaultDsTwoStepFlag | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.3 | TruthValue | read-write | Determines whether clock uses follow-up packets. |
| ME1 me1200PtpConfigClocksDefaultDsPriority1 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.4 | ME1200Unsigned8 | read-write | The priority1 value. |
| ME1 me1200PtpConfigClocksDefaultDsPriority2 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.5 | ME1200Unsigned8 | read-write | The priority2 value. |
| T/F me1200PtpConfigClocksDefaultDsOneWay | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.6 | TruthValue | read-write | Determines whether clock uses sync packets only. |
| ME1 me1200PtpConfigClocksDefaultDsDomainNumber | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.7 | ME1200Unsigned8 | read-write | The domain number. |
| ME1 me1200PtpConfigClocksDefaultDsProtocol | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.8 | ME1200ptpProtocol | read-write | The protocol to be used for the encapsulation of the PTP packets. |
| T/F me1200PtpConfigClocksDefaultDsVlanTagEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9 | TruthValue | read-write | Determines whether clock uses sync packets only. |
| ME1 me1200PtpConfigClocksDefaultDsVid | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.10 | ME1200Unsigned16 | read-write | The VLAN id (if VLAN tagging is enabled). |
| ME1 me1200PtpConfigClocksDefaultDsPcp | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.11 | ME1200Unsigned8 | read-write | The PCP value (if VLAN tagging is enabled). |
| I32 me1200PtpConfigClocksDefaultDsMep | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.12 | Integer32 | read-write | The mep instance number (if protocol is OAM). |
| U32 me1200PtpConfigClocksDefaultDsClkDom | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.13 | Unsigned32 | read-write | Clock domain used. |
| ME1 me1200PtpConfigClocksDefaultDsDscp | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.14 | ME1200Unsigned8 | read-write | The DSCP field value (if protocol is IPv4). |
| ME1 me1200PtpConfigClocksDefaultDsProfile | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.15 | ME1200ptpProfile | read-write | The PTP profile. |
| ME1 me1200PtpConfigClocksDefaultDsLocalPriority | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.16 | ME1200Unsigned8 | read-write | The local priority value. |
| ME1 me1200PtpConfigClocksDefaultDsAction | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.100 | ME1200RowEditorState | read-write | Action |
| me1200PtpConfigClocksDefaultDsTableRowEditor | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2 | |||
| I32 me1200PtpConfigClocksDefaultDsTableRowEditorClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.1 | Integer32 | read-write | - |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorDeviceType | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.2 | ME1200ptpDeviceType | read-write | The PTP clock type. |
| T/F me1200PtpConfigClocksDefaultDsTableRowEditorTwoStepFlag | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.3 | TruthValue | read-write | Determines whether clock uses follow-up packets. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorPriority1 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.4 | ME1200Unsigned8 | read-write | The priority1 value. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorPriority2 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.5 | ME1200Unsigned8 | read-write | The priority2 value. |
| T/F me1200PtpConfigClocksDefaultDsTableRowEditorOneWay | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.6 | TruthValue | read-write | Determines whether clock uses sync packets only. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorDomainNumber | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.7 | ME1200Unsigned8 | read-write | The domain number. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorProtocol | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.8 | ME1200ptpProtocol | read-write | The protocol to be used for the encapsulation of the PTP packets. |
| T/F me1200PtpConfigClocksDefaultDsTableRowEditorVlanTagEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.9 | TruthValue | read-write | Determines whether clock uses sync packets only. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorVid | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.10 | ME1200Unsigned16 | read-write | The VLAN id (if VLAN tagging is enabled). |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorPcp | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.11 | ME1200Unsigned8 | read-write | The PCP value (if VLAN tagging is enabled). |
| I32 me1200PtpConfigClocksDefaultDsTableRowEditorMep | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.12 | Integer32 | read-write | The mep instance number (if protocol is OAM). |
| U32 me1200PtpConfigClocksDefaultDsTableRowEditorClkDom | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.13 | Unsigned32 | read-write | Clock domain used. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorDscp | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.14 | ME1200Unsigned8 | read-write | The DSCP field value (if protocol is IPv4). |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorProfile | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.15 | ME1200ptpProfile | read-write | The PTP profile. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorLocalPriority | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.16 | ME1200Unsigned8 | read-write | The local priority value. |
| ME1 me1200PtpConfigClocksDefaultDsTableRowEditorAction | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.2.100 | ME1200RowEditorState | read-write | Action |
| me1200PtpConfigClocksTimePropertiesDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3 | not-accessible | This is the configurable part of the PTP clocks TimePropertiesDS. | |
| me1200PtpConfigClocksTimePropertiesDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksTimePropertiesDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.1 | Integer32 | not-accessible | - |
| NUM me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffset | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.2 | ME1200Integer16 | read-write | The current UTC time offset. |
| T/F me1200PtpConfigClocksTimePropertiesDsCurrentUtcOffsetValid | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.3 | TruthValue | read-write | Indicates whether the current UTC time offset value is valid. |
| T/F me1200PtpConfigClocksTimePropertiesDsLeap59 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.4 | TruthValue | read-write | Indicates that the last minute of the day has only 59 seconds. |
| T/F me1200PtpConfigClocksTimePropertiesDsLeap61 | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.5 | TruthValue | read-write | Indicates that the last minute of the day has 61 seconds. |
| T/F me1200PtpConfigClocksTimePropertiesDsTimeTraceable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.6 | TruthValue | read-write | Indicates that time is traceable to a primary reference. |
| T/F me1200PtpConfigClocksTimePropertiesDsFrequencyTraceable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.7 | TruthValue | read-write | Indicates that frequency is traceable to a primary reference. |
| T/F me1200PtpConfigClocksTimePropertiesDsPtpTimescale | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.8 | TruthValue | read-write | Indicates whether timescale of the grandmaster clock is PTP. |
| ME1 me1200PtpConfigClocksTimePropertiesDsTimeSource | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.3.1.9 | ME1200Unsigned8 | read-write | Source of time used by the grandmaster clock. |
| me1200PtpConfigClocksFilterParametersTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4 | not-accessible | This is the configurable part of the PTP clocks filter parameters. | |
| me1200PtpConfigClocksFilterParametersEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksFilterParametersClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1.1 | Integer32 | not-accessible | - |
| U32 me1200PtpConfigClocksFilterParametersDelayFilter | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1.2 | Unsigned32 | read-write | Defines the time constant of the delay filter. |
| U32 me1200PtpConfigClocksFilterParametersFilterType | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1.3 | Unsigned32 | read-write | Selects the type of filter/servo used. |
| U32 me1200PtpConfigClocksFilterParametersPeriod | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1.4 | Unsigned32 | read-write | Defines the period of the offset filter. |
| U32 me1200PtpConfigClocksFilterParametersDist | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.4.1.5 | Unsigned32 | read-write | Sets the dist value of the offset filter. |
| me1200PtpConfigClocksServoParametersTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5 | not-accessible | This is the configurable part of the PTP clocks servo parameters. | |
| me1200PtpConfigClocksServoParametersEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksServoParametersClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.1 | Integer32 | not-accessible | - |
| T/F me1200PtpConfigClocksServoParametersDisplay | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.2 | TruthValue | read-write | Indicates whether output shall be sent to the debug terminal. |
| T/F me1200PtpConfigClocksServoParametersPEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.3 | TruthValue | read-write | Indicates whether P-value of servo algorithm shall be used. |
| T/F me1200PtpConfigClocksServoParametersIEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.4 | TruthValue | read-write | Indicates whether I-value of servo algorithm shall be used. |
| T/F me1200PtpConfigClocksServoParametersDEnable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.5 | TruthValue | read-write | Indicates whether D-value of servo algorithm shall be used. |
| U32 me1200PtpConfigClocksServoParametersPval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.6 | Unsigned32 | read-write | P-value of the offset filter. |
| U32 me1200PtpConfigClocksServoParametersIval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.7 | Unsigned32 | read-write | I-value of the offset filter. |
| U32 me1200PtpConfigClocksServoParametersDval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.8 | Unsigned32 | read-write | D-value of the offset filter. |
| ME1 me1200PtpConfigClocksServoParametersSrvOption | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.9 | ME1200ptpServoClockOption | read-write | D-value of the offset filter. |
| U32 me1200PtpConfigClocksServoParametersSynceThreshold | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.10 | Unsigned32 | read-write | SyncE Threshold |
| U32 me1200PtpConfigClocksServoParametersSynceAp | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.11 | Unsigned32 | read-write | SyncE Ap |
| I32 me1200PtpConfigClocksServoParametersHoFilter | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.12 | Integer32 | read-write | Holdoff low pass filter constant. |
| ME1 me1200PtpConfigClocksServoParametersStableAdjThreshold | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.5.1.13 | ME1200Unsigned64 | read-write | Threshold at which offset is assumed to be stable. |
| me1200PtpConfigClocksSlaveConfigTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6 | not-accessible | This is the configurable part of the PTP clocks slave configuration. | |
| me1200PtpConfigClocksSlaveConfigEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksSlaveConfigClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6.1.1 | Integer32 | not-accessible | - |
| U32 me1200PtpConfigClocksSlaveConfigStableOffset | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6.1.2 | Unsigned32 | read-write | Stable offset threshold in ns. |
| U32 me1200PtpConfigClocksSlaveConfigOffsetOk | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6.1.3 | Unsigned32 | read-write | Offset OK threshold in ns. |
| U32 me1200PtpConfigClocksSlaveConfigOffsetFail | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.6.1.4 | Unsigned32 | read-write | Offset fail threshold in ns. |
| me1200PtpConfigClocksUnicastSlaveConfigTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7 | not-accessible | This is the configurable part of the PTP clocks unicast slave configuration. | |
| me1200PtpConfigClocksUnicastSlaveConfigEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksUnicastSlaveConfigClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7.1.1 | Integer32 | not-accessible | - |
| I32 me1200PtpConfigClocksUnicastSlaveConfigMasterId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7.1.2 | Integer32 | not-accessible | - |
| U32 me1200PtpConfigClocksUnicastSlaveConfigDuration | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7.1.3 | Unsigned32 | read-write | Number of seconds for which the Announce/Sync messages are requested. |
| IP me1200PtpConfigClocksUnicastSlaveConfigIpAddress | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.7.1.4 | IpAddress | read-write | IPv4 address of requested master clock. |
| me1200PtpConfigClocksPortDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8 | not-accessible | This is the configurable part of the PTP clocks PortDS. | |
| me1200PtpConfigClocksPortDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpConfigClocksPortDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.1 | Integer32 | not-accessible | - |
| NUM me1200PtpConfigClocksPortDsPortId | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.2 | ME1200InterfaceIndex | not-accessible | - |
| ME1 me1200PtpConfigClocksPortDsEnabled | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.3 | ME1200Unsigned8 | read-write | Defines whether port is enabled. |
| NUM me1200PtpConfigClocksPortDsLogAnnounceInterval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.4 | ME1200Integer16 | read-write | Interval between announce message transmissions. |
| ME1 me1200PtpConfigClocksPortDsAnnounceReceiptTimeout | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.5 | ME1200Unsigned8 | read-write | The timeout for receiving announce messages on the port. |
| NUM me1200PtpConfigClocksPortDsLogSyncInterval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.6 | ME1200Integer16 | read-write | The interval for issuing sync meesages in the master. |
| ME1 me1200PtpConfigClocksPortDsDelayMechanism | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.7 | ME1200Unsigned8 | read-write | The delay mechanism used for the port. |
| NUM me1200PtpConfigClocksPortDsLogMinPdelayReqInterval | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.8 | ME1200Integer16 | read-write | The value of logMinPdelayReqInterval |
| NUM me1200PtpConfigClocksPortDsDelayAsymmetry | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.9 | ME1200Integer64 | read-write | The value for the communication path asymmetry. |
| NUM me1200PtpConfigClocksPortDsIngressLatency | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.10 | ME1200Integer64 | read-write | Ingress delay for port. |
| NUM me1200PtpConfigClocksPortDsEgressLatency | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.11 | ME1200Integer64 | read-write | Egress delay for port. |
| T/F me1200PtpConfigClocksPortDsPortInternal | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.12 | TruthValue | read-write | Defines whether port is enabled as an internal interface. |
| ME1 me1200PtpConfigClocksPortDsVersionNumber | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.13 | ME1200Unsigned16 | read-write | The version of PTP being used by the port. |
| ME1 me1200PtpConfigClocksPortDsMcastAddr | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.14 | ME1200ptpDestAdrType | read-write | The multicast address used (default or link local). |
| T/F me1200PtpConfigClocksPortDsNotSlave | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.15 | TruthValue | read-write | When true, the port will not act as a slave. |
| ME1 me1200PtpConfigClocksPortDsLocalPriority | 1.3.6.1.4.1.9.9.815.1.65.1.2.2.8.1.16 | ME1200Unsigned8 | read-write | The local priority value. |
| me1200PtpStatus | 1.3.6.1.4.1.9.9.815.1.65.1.3 | |||
| me1200PtpStatusClocks | 1.3.6.1.4.1.9.9.815.1.65.1.3.1 | |||
| me1200PtpStatusClocksDefaultDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1 | not-accessible | This is the dynamic (status) part of the PTP clocks DefaultDS. | |
| me1200PtpStatusClocksDefaultDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksDefaultDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1.1 | Integer32 | not-accessible | - |
| OCT me1200PtpStatusClocksDefaultDsClockIdentity | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1.2 | OCTET STRING | read-only | This is the unique 8 byte clockIdentify field from the DefaultDS structure. |
| ME1 me1200PtpStatusClocksDefaultDsClockQualityClockClass | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1.3 | ME1200Unsigned8 | read-only | This is the clock class field of the clock quality structure. |
| ME1 me1200PtpStatusClocksDefaultDsClockQualityClockAccuracy | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1.4 | ME1200Unsigned8 | read-only | This is the clock accuracy field of the clock quality structure. |
| ME1 me1200PtpStatusClocksDefaultDsClockQualityOffsetScaledLogVar | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.1.1.5 | ME1200Unsigned16 | read-only | This is the offsetScaledLogVariance field of the clock quality structure. |
| me1200PtpStatusClocksCurrentDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2 | not-accessible | This is the dynamic (status) part of the PTP clocks CurrentDS. | |
| me1200PtpStatusClocksCurrentDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksCurrentDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2.1.1 | Integer32 | not-accessible | - |
| ME1 me1200PtpStatusClocksCurrentDsStepsRemoved | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2.1.2 | ME1200Unsigned16 | read-only | The number of PTP clocks traversed from the grandmaster to the local PTP clock. |
| NUM me1200PtpStatusClocksCurrentDsOffsetFromMaster | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2.1.3 | ME1200Integer64 | read-only | The time differece in ns from the grandmaster to the local PTP clock. |
| NUM me1200PtpStatusClocksCurrentDsMeanPathDelay | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.2.1.4 | ME1200Integer64 | read-only | The mean path delay from the master to the local slave. |
| me1200PtpStatusClocksParentDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3 | not-accessible | This is the dynamic (status) part of the PTP clocks ParentDS. | |
| me1200PtpStatusClocksParentDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksParentDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.1 | Integer32 | not-accessible | - |
| OCT me1200PtpStatusClocksParentDsParentPortIdentityClockIdentity | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.2 | OCTET STRING | read-only | This is the 8 byte unique clock identity of the parent port. |
| ME1 me1200PtpStatusClocksParentDsParentPortIdentityPortNumber | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.3 | ME1200Unsigned16 | read-only | This is the port number on the parent associated with the parent clock. |
| T/F me1200PtpStatusClocksParentDsParentStats | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.4 | TruthValue | read-only | Parents stats (always false). |
| ME1 me1200PtpStatusClocksParentDsObservedParentOffsetScaledLogVar | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.5 | ME1200Unsigned16 | read-only | This field is optional and is not computed (as signaled by parentStats being false). |
| I32 me1200PtpStatusClocksParentDsObservedParentClockPhaseChangeRate | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.6 | Integer32 | read-only | This field is optional and is not computed (as signaled by parentStats being false). |
| OCT me1200PtpStatusClocksParentDsGrmstrIdentity | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.7 | OCTET STRING | read-only | This is the 8 byte unique clock identity of the grand master clock. |
| ME1 me1200PtpStatusClocksParentDsGrmstrClkQualClockClass | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.8 | ME1200Unsigned8 | read-only | This is the clock class of the clock quality structure of the grand master clock. |
| ME1 me1200PtpStatusClocksParentDsGmstrClkQualClockAccuracy | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.9 | ME1200Unsigned8 | read-only | This is the clock accuracy of the clock quality structure of the grand master clock. |
| ME1 me1200PtpStatusClocksParentDsGmstrClkQualOffsetScaledLogVar | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.10 | ME1200Unsigned16 | read-only | This is the offsetScaledLogVariance field of the clock quality structure of the grand master clock. |
| ME1 me1200PtpStatusClocksParentDsGmstrPriority1 | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.11 | ME1200Unsigned8 | read-only | Grandmaster Priority1 value. |
| ME1 me1200PtpStatusClocksParentDsGmstrPriority2 | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.3.1.12 | ME1200Unsigned8 | read-only | Grandmaster Priority2 value. |
| me1200PtpStatusClocksTimePropertiesDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4 | not-accessible | This is the dynamic (status) part of the PTP clocks TimePropertiesDS. | |
| me1200PtpStatusClocksTimePropertiesDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksTimePropertiesDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.1 | Integer32 | not-accessible | - |
| NUM me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffset | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.2 | ME1200Integer16 | read-only | The current UTC time offset. |
| T/F me1200PtpStatusClocksTimePropertiesDsCurrentUtcOffsetValid | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.3 | TruthValue | read-only | Indicates whether the current UTC time offset value is valid. |
| T/F me1200PtpStatusClocksTimePropertiesDsLeap59 | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.4 | TruthValue | read-only | Indicates that the last minute of the day has only 59 seconds. |
| T/F me1200PtpStatusClocksTimePropertiesDsLeap61 | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.5 | TruthValue | read-only | Indicates that the last minute of the day has 61 seconds. |
| T/F me1200PtpStatusClocksTimePropertiesDsTimeTraceable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.6 | TruthValue | read-only | Indicates that time is traceable to a primary reference. |
| T/F me1200PtpStatusClocksTimePropertiesDsFrequencyTraceable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.7 | TruthValue | read-only | Indicates that frequency is traceable to a primary reference. |
| T/F me1200PtpStatusClocksTimePropertiesDsPtpTimescale | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.8 | TruthValue | read-only | Indicates whether timescale of the grandmaster clock is PTP. |
| ME1 me1200PtpStatusClocksTimePropertiesDsTimeSource | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.4.1.9 | ME1200Unsigned8 | read-only | Source of time used by the grandmaster clock. |
| me1200PtpStatusClocksSlaveDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5 | not-accessible | This is the dynamic (status) part of the PTP clocks SlaveDS. | |
| me1200PtpStatusClocksSlaveDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksSlaveDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1.1 | Integer32 | not-accessible | - |
| ME1 me1200PtpStatusClocksSlaveDsSlavePort | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1.2 | ME1200Unsigned16 | read-only | 0 => no slave port, 1..n => selected slave port. |
| ME1 me1200PtpStatusClocksSlaveDsSlaveState | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1.3 | ME1200ptpSlaveClockState | read-only | The slaves state. |
| ME1 me1200PtpStatusClocksSlaveDsHoldoverStable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1.4 | ME1200Unsigned8 | read-only | True if the stabilization period has expired. |
| NUM me1200PtpStatusClocksSlaveDsHoldoverAdj | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.5.1.5 | ME1200Integer64 | read-only | The calculated holdover offset (ppb*10). |
| me1200PtpStatusClocksUnicastMasterTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6 | not-accessible | This is the dynamic (status) part of the PTP clocks unicast master table. | |
| me1200PtpStatusClocksUnicastMasterEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksUnicastMasterClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.1 | Integer32 | not-accessible | - |
| IP me1200PtpStatusClocksUnicastMasterSlaveIp | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.2 | IpAddress | not-accessible | - |
| MAC me1200PtpStatusClocksUnicastMasterSlaveMac | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.3 | MacAddress | read-only | - |
| ME1 me1200PtpStatusClocksUnicastMasterPort | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.4 | ME1200Unsigned16 | read-only | Port on the master that slave is connected to. |
| NUM me1200PtpStatusClocksUnicastMasterAnnLogMsgPeriod | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.5 | ME1200Integer16 | read-only | The granted Announce interval. |
| T/F me1200PtpStatusClocksUnicastMasterAnn | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.6 | TruthValue | read-only | True if sending announce messages. |
| NUM me1200PtpStatusClocksUnicastMasterLogMsgPeriod | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.7 | ME1200Integer16 | read-only | The granted sync interval. |
| T/F me1200PtpStatusClocksUnicastMasterSync | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.6.1.8 | TruthValue | read-only | True if sending sync messages. |
| me1200PtpStatusClocksUnicastSlaveTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7 | not-accessible | This is the dynamic (status) part of the PTP clocks unicast slave table. | |
| me1200PtpStatusClocksUnicastSlaveEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksUnicastSlaveClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.1 | Integer32 | not-accessible | - |
| I32 me1200PtpStatusClocksUnicastSlaveMasterId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.2 | Integer32 | not-accessible | - |
| IP me1200PtpStatusClocksUnicastSlaveMasterIp | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.3 | IpAddress | read-only | This is the IP address of the master. |
| MAC me1200PtpStatusClocksUnicastSlaveMasterMac | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.4 | MacAddress | read-only | This is the MAC address of the master. |
| OCT me1200PtpStatusClocksUnicastSlaveSourcePortIdentityClockIdentity | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.5 | OCTET STRING | read-only | This is the 8 byte unique clock identity of the source port. |
| ME1 me1200PtpStatusClocksUnicastSlaveSourcePortIdentityPortNumber | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.6 | ME1200Unsigned16 | read-only | This is port number of the port used on the source. |
| ME1 me1200PtpStatusClocksUnicastSlavePort | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.7 | ME1200Unsigned16 | read-only | The port (on the slave) connected to the master. |
| NUM me1200PtpStatusClocksUnicastSlaveLogMsgPeriod | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.8 | ME1200Integer16 | read-only | The granted sync interval. |
| ME1 me1200PtpStatusClocksUnicastSlaveCommState | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.9 | ME1200ptpUcCommState | read-only | Communication state. |
| IP me1200PtpStatusClocksUnicastSlaveConfMasterIp | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.7.1.10 | IpAddress | read-only | Copy of the destination ip address. |
| me1200PtpStatusClocksPortsDsTable | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8 | not-accessible | This is the dynamic (status) part of the PTP clocks PortDS. | |
| me1200PtpStatusClocksPortsDsEntry | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpStatusClocksPortsDsClockId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.1 | Integer32 | not-accessible | - |
| NUM me1200PtpStatusClocksPortsDsPortId | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.2 | ME1200InterfaceIndex | not-accessible | - |
| ME1 me1200PtpStatusClocksPortsDsPortState | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.3 | ME1200ptpClockPortState | read-only | - |
| NUM me1200PtpStatusClocksPortsDsLogMinDelayReqInterval | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.4 | ME1200Integer16 | read-only | - |
| NUM me1200PtpStatusClocksPortsDsPeerMeanPathDelay | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.5 | ME1200Integer64 | read-only | - |
| T/F me1200PtpStatusClocksPortsDsPeerDelayOk | 1.3.6.1.4.1.9.9.815.1.65.1.3.1.8.1.6 | TruthValue | read-only | - |
| me1200PtpControl | 1.3.6.1.4.1.9.9.815.1.65.1.4 | |||
| me1200PtpControlClocksTable | 1.3.6.1.4.1.9.9.815.1.65.1.4.1 | not-accessible | This is the PTP clocks control structure. | |
| me1200PtpControlClocksEntry | 1.3.6.1.4.1.9.9.815.1.65.1.4.1.1 | not-accessible | The clockId index must be a value must be a value from 0 up to the number of PTP clocks minus one. | |
| I32 me1200PtpControlClocksClockId | 1.3.6.1.4.1.9.9.815.1.65.1.4.1.1.1 | Integer32 | not-accessible | - |
| ME1 me1200PtpControlClocksSyncToSystemClock | 1.3.6.1.4.1.9.9.815.1.65.1.4.1.1.2 | ME1200Unsigned8 | read-write | - |
| me1200PtpStatistics | 1.3.6.1.4.1.9.9.815.1.65.1.5 | |||
| me1200PtpNotifs | 1.3.6.1.4.1.9.9.815.1.65.1.6 | |||
| NTF me1200PtpNotifsPortStateChange | 1.3.6.1.4.1.9.9.815.1.65.1.6.1 | An me1200PtpNotifsPortStateChange notification is sent when the Port State changes occurs. Port State is an enumerated integer value. Description of various possible Port States is: initializing - In this state a port initializes its data sets, hardware, and communication facilities. faulty - The fault state of the protocol. disabled - The port shall not place any messages on its communication path. listening - The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. preMaster - The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master - The port is behaving as a master port. passive - The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message uncalibrated - The local port is preparing to synchronize to the master port. slave - The port is synchronizing to the selected master port. p2pTransparent - The port is in point to point transparent state. e2eTransparent - The port is in end to end transparent state. | ||
| NTF me1200PtpNotifsClockSlaveStateChange | 1.3.6.1.4.1.9.9.815.1.65.1.6.2 | An me1200PtpNotifsClockSlaveStateChange notification is sent when the clock slave state changes. Clock Slave Sate is an enumerated integer value. Description of various possible Port States is: Freerun - Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master or because of some other input error (erroneous packets, etc). FreqLocking - The slave device is receiving packets from a master and is trying to acquire a frequency lock. PhaseLocking - The slave device is receiving packets from a master and is trying to acquire a phase lock. Locked - Locked to the master with respect to frequency and phase. Holdover - In this state the slave device is locked to a master but communication with the master is lost or the timestamps in the ptp packets are incorrect. But since the slave was locked to the master, it can run with the same accuracy for sometime. The slave can continue to operate in this state for some time. If communication with the master is not restored for a while, the device is moved to the FREERUN state. Invalid - The slave is in Invalid state. | ||
| NTF me1200PtpNotifsUnicastCommunicationStateChange | 1.3.6.1.4.1.9.9.815.1.65.1.6.3 | An me1200PtpNotifsUnicastCommunicationStateChange notification is sent when the unicast communication state changes (A unicast slave reports change in the communication state to the configured masters). Unicast communication state is an enumerated integer value. Description of various possible states is: idle - When communication state is idle. intializing - When communication state is initializing. connected - When communication state is connected. selected - When communication state is selected. synced - When communication state is synced. | ||
| NTF me1200PtpNotifsUnicastSlaveAppears | 1.3.6.1.4.1.9.9.815.1.65.1.6.4 | An me1200PtpNotifsUnicastSlaveAppears notification is sent when a unicast slave appears. | ||
| NTF me1200PtpNotifsUnicastSlaveDisappears | 1.3.6.1.4.1.9.9.815.1.65.1.6.5 | An me1200PtpNotifsUnicastSlaveDisappears notification is sent when a unicast slave disappears. | ||
| me1200PtpMibConformance | 1.3.6.1.4.1.9.9.815.1.65.2 | |||
| me1200PtpMibCompliances | 1.3.6.1.4.1.9.9.815.1.65.2.1 | |||
| me1200PtpMibCompliance | 1.3.6.1.4.1.9.9.815.1.65.2.1.1 | The compliance statement for the implementation. | ||
| me1200PtpMibGroups | 1.3.6.1.4.1.9.9.815.1.65.2.2 | |||
| me1200PtpCapabilitiesGlobalsInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.1 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigGlobalsExternalClockModeInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.2 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigGlobalsSystemTimeSyncModeInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.3 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksDefaultDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.4 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksDefaultDsTableRowEditorInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.5 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksTimePropertiesDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.6 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksFilterParametersTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.7 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksServoParametersTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.8 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksSlaveConfigTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.9 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksUnicastSlaveConfigTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.10 | A collection of objects suitable for bulk operations. | ||
| me1200PtpConfigClocksPortDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.11 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksDefaultDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.12 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksCurrentDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.13 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksParentDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.14 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksTimePropertiesDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.15 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksSlaveDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.16 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksUnicastMasterTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.17 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksUnicastSlaveTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.18 | A collection of objects suitable for bulk operations. | ||
| me1200PtpStatusClocksPortsDsTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.19 | A collection of objects suitable for bulk operations. | ||
| me1200PtpControlClocksTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.20 | A collection of objects suitable for bulk operations. | ||
| me1200PtpNotifsGroup | 1.3.6.1.4.1.9.9.815.1.65.2.2.21 | PTP Nofication events' group. |
RFC description
Precision Time Protocol (PTP) management for Cisco ME1200 switches.
Start monitoring Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.