All MIBs › ME1200-PTP-MIB › me1200PtpConfigClocksDefaultDsVlanTagEnable
me1200PtpConfigClocksDefaultDsVlanTagEnable
Module: ME1200-PTP-MIB
OID (symbolic): ME1200-PTP-MIB::me1200PtpConfigClocksDefaultDsVlanTagEnable
OID (numeric): 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Determines whether clock uses sync packets only.
What is me1200PtpConfigClocksDefaultDsVlanTagEnable?
Note: the source MIB's DESCRIPTION for this object literally reads "Determines whether clock uses sync packets only," which is copy-pasted from the earlier sibling column me1200PtpConfigClocksDefaultDsOneWay — both the DefaultDs table and its RowEditor twin repeat this same wrong text. Reading it per its own name and TruthValue syntax, alongside the neighboring Vid and Pcp columns (each documented as taking effect "if VLAN tagging is enabled"), it actually turns 802.1Q VLAN tagging on or off for this PTP clock's outgoing packets, so an admin sets it to true before the Vid/Pcp settings have any effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9 snmpwalk -v2c -c public <target> ME1200-PTP-MIB::me1200PtpConfigClocksDefaultDsVlanTagEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9.1 snmpget -v2c -c public <target> ME1200-PTP-MIB::me1200PtpConfigClocksDefaultDsVlanTagEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9.1 s <value>
Start monitoring Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-PTP-MIB::me1200PtpConfigClocksDefaultDsVlanTagEnable OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.65 | me1200PtpMib | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1 | me1200PtpMibObjects | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.2 | me1200PtpConfig | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.2.2 | me1200PtpConfigClocks | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1 | me1200PtpConfigClocksDefaultDsTable | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1 | me1200PtpConfigClocksDefaultDsEntry | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.2.2.1.1.9 | me1200PtpConfigClocksDefaultDsVlanTagEnable | ME1200-PTP-MIB |