All MIBs › ME1200-PTP-MIB › me1200PtpNotifsClockSlaveStateChange

me1200PtpNotifsClockSlaveStateChange

OID (symbolic): ME1200-PTP-MIB::me1200PtpNotifsClockSlaveStateChange

OID (numeric): 1.3.6.1.4.1.9.9.815.1.65.1.6.2

Node type: NOTIFICATION-TYPE

Description: An me1200PtpNotifsClockSlaveStateChange notification is sent when the clock slave state changes. Clock Slave Sate is an enumerated integer value. Description of various possible Port States is:

Freerun - Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master or because of some other input error (erroneous packets, etc). FreqLocking - The slave device is receiving packets from a master and is trying to acquire a frequency lock. PhaseLocking - The slave device is receiving packets from a master and is trying to acquire a phase lock. Locked - Locked to the master with respect to frequency and phase. Holdover - In this state the slave device is locked to a master but communication with the master is lost or the timestamps in the ptp packets are incorrect. But since the slave was locked to the master, it can run with the same accuracy for sometime. The slave can continue to operate in this state for some time. If communication with the master is not restored for a while, the device is moved to the FREERUN state. Invalid - The slave is in Invalid state.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' ME1200-PTP-MIB::me1200PtpNotifsClockSlaveStateChange
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.815.1.65.1.6.2

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:63539->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (95192627) 11 days, 0:25:26.27
  SNMPv2-MIB::snmpTrapOID.0 = OID: ME1200-PTP-MIB::me1200PtpNotifsClockSlaveStateChange

Start monitoring Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-PTP-MIB::me1200PtpNotifsClockSlaveStateChange OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI
1.3.6.1.4.1.9.9.815	ciscoME1200MIB	CISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1	me1200SwitchMgmt	CISCOME1200-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.815.1.65	me1200PtpMib	ME1200-PTP-MIB
1.3.6.1.4.1.9.9.815.1.65.1	me1200PtpMibObjects	ME1200-PTP-MIB
1.3.6.1.4.1.9.9.815.1.65.1.6	me1200PtpNotifs	ME1200-PTP-MIB
1.3.6.1.4.1.9.9.815.1.65.1.6.2	me1200PtpNotifsClockSlaveStateChange	ME1200-PTP-MIB

ME1200-PTP-MIB :: me1200PtpNotifsClockSlaveStateChange

me1200PtpNotifsClockSlaveStateChange

Module

This MIB depends on